How to Connect POE NVR via the Onvif Protocol? - NVR IPCAMERA SECURITY
Guide How To IPC

How to Connect POE NVR via the Onvif Protocol?

How to or Wireless IP Camera to via the Protocol?

Usually, the POE we sell includes several POE IP so that camera can be plugged into NVR's port directly.

Load More : Tutorial of General IP Security System

But some customers may need to connect non-POE IP cameras to NVR.

In this situation, the cameras should meet two requirements below.

1. The IP camera must support the onvif protocol.

2. The IP camera's resolution had better equal to or lower than resolution NVR.

3. The camera should be connected to the router, by cable, or by wifi. Therefore, a is also OK.

Here are the steps:

1. Please use a cable to connect the IP camera to a router, and connect the camera to a power source by adapter.

2. Connect the NVR to the same router by network cable.

3. Go to the Main Menu—Config—Channel to search the camera's IP.

mceclip1.png

4. It will detect the camera's IP. Add it to the system.

Come back to the main screen and the image of the IP camera appears.

About the author

M.Salih ASLAN

Hello, I live in Salih Turkey. I serve in dvr, nvr, security and surveillance industry. Write to me for any comments and suggestions ..

3 Comments

Click here to post a comment

Leave a Reply to Teddie Pugh Cancel reply