Category: Guide

1 2 3 10 10 / 91 POSTS
Connect Switch to router via an Uplink port Connect XVR and IP Cameras to switch On the XVR, go to Menu > Camera > Camera tab [...]
Audio Setup Audio can be very helpful in CCTV when installing cameras around POS systems, medical buildings, and conference rooms. Getting so [...]
Hello, in this blog post, we will tell you how to change night/star and infrared light modes for ip cameras with all the stages. Stay tuned for visual [...]
How to configure RAID? TAGS: Array configuration, RAID, HDD, hot spare disk, array fail, array status, system maintenance, system reliability, rebu [...]
Answer: Note: Only certain models support this function. Please see the actual model for details. Note: Click Test to verify whether an FTP connecti [...]
Hello, this guide will show you the way you need to set up the ip camera settings. You can solve the problem by following the relevant steps below. Do [...]
Preparation 1. The model of optical fingerprint recorder is DS-K1F820-F; 2. Please download the iVMS-4200 Client on Hikvision official website [...]
1 Set LAN IP Plug the camera and PC to same router. Run SADP software and then all IP cameras in same LAN will be shown in software. Set the IP [...]
The Setup Menu contains several different options that will let you configure and customize your Zosi NVR. The Setup Menu is where you will con [...]
Here are the steps about how to set up the push function for the security system. 1. Log in to the Annke DVR/NVR system, then go to Menu-->Netwo [...]
1 2 3 10 10 / 91 POSTS
DMCA.com Protection Status