How to setup motion detection in the IPC?

HomeGuideHow To

How to setup motion detection in the IPC?

How to setup motion detection in the IPC? Ans: Setup Motion Detection in CloudSEE2.0 IPC Access the IPC web interface. Login with u

Sricam installation and user guide
Ddns Setup for All Brand Dvr Nvr Devices
How to Use Motion Detection in ACTi Cameras

Ans:

  1. in CloudSEE2.0 IPC

Access the IPC web interface. Login with username and . Or access the IPC by clicking the Setting in the -6100 to access the IPC menu. Click and Motion Detection. Click Enable Motion Detection and then set the motion detection region. Draw rectangle on the mini display. Also, set the sensitivity. Once you set the region and sensitivity.

图片10.png

Click Alarm Linkage to set the alarm actions. You can set basic like Send to , Send Alarm and Start to Record (Support IPC with SD Card). You can schedule the alarm if you required. Click Arming Schedule to set. By , its 24×7. After all this, you set the motion detection configured successfully.

图片11.png

2.Setup Motion Detection in CloudSEE1.0 IPC

Access the IPC by . Login with username and password. Click on System Config on the top of the main page, the IPC menu will open. (Please make sure you the Web plugin and enabled the ActiveX controls.) Or access the IPC settings by clicking the Remote Setup in the VMS-6100 to access the IPC menu, the IPC menu will open. Click Alarm button and then click Motion Detection tab.

图片12.png

Tick to Enable the motion detection and then set the motion detection region. Draw rectangle on the mini display. Also, set the sensitivity and enable the alarm actions you required. There you can set the basic settings like Send Alarm to Client, Send Alarm Email and Send to VMS. Save the settings and then schedule the alarm. Click Schedule tab. By , its 24×7. After all this, you set the motion detection configured successfully.

图片13.png

COMMENTS

WORDPRESS: 3
DMCA.com Protection Status