Tag: How to
You can change the password and Password Reset Email of the VIGI NVR. Password Reset Email is used to receive the verification code when you need to r [...]
If you want to upgrade the firmware of VIGI NVR, please follow the steps below:
Step 1. Right-click on the screen, click Settings on the Main Menu.
[...]
Most consumers need a professional IP-based security camera system for their home, business or property, but it is assumed that IP systems are complex [...]
Local upgrade method of operation
1. To download the program into the U Disk, U Disk inserted into the VCR
Best program only put into one, so as [...]
Phone with Computer How to remote:
-Confirm that the VCR version information interface nat status is connected successfully, if the state is to det [...]
How to Initialize Video Intercom using Configtool
Description
Initializing our Video intercom with Configtool simplifies and streamlines the process [...]
How to Set Up PTZ Activation Via Stationary Camera on a NVR
Description
This article will explain setting up a fixed camera on motion detection to t [...]
DDNS Setup
Description
DDNS stands for Dynamic Domain Name System. The main advantage for DDNS is If you have a dynamic ip address, (where your addr [...]
NVR/Basic Setup/Connect IPC to NVR
How to Connect Camera to NVR
1. You want to connect a CAT5 network cable to your IP camera.
2. Connect t [...]
New GUI/Instructions/Remote Access via P2P
New GUI - P2P Setup
Description
This article will go over initializing P2P on our New GUI devices
Prere [...]