Hello, in this blog post, we will tell you how to change night/star and infrared light modes for ip cameras with all the stages. Stay tuned for visual and...
Tag - How to
How to configure RAID? TAGS: Array configuration, RAID, HDD, hot spare disk, array fail, array status, system maintenance, system reliability, rebuild array...
Answer: Note: Only certain models support this function. Please see the actual model for details. Note: Click Test to verify whether an FTP connection can be...
Hello, this guide will show you the way you need to set up the ip camera settings. You can solve the problem by following the relevant steps below. Do not...
Preparation 1. The model of optical fingerprint recorder is DS-K1F820-F; 2. Please download the iVMS-4200 Client on Hikvision official website; 84.html And in...
1 Set LAN IP Plug the camera and PC to same router. Run SADP software and then all IP cameras in same LAN will be shown in software. Set the IP address for...
The Setup Menu contains several different options that will let you configure and customize your Zosi NVR. The Setup Menu is where you will control most of the...
Here are the steps about how to set up the push function for the security system. 1. Log in to the Annke DVR/NVR system, then go...
Here are the steps for you: 1. Please make sure DVR or NVR has connected to the router and Internet successfully. You can judge by the picture below. If it...
After a few easy steps, the Blink camera system will be showing you clips in the app. Install the Blink application The most recent version of...