How To – Add 3rd Party IP Camera to NVR

HomeGuideHow To

How To – Add 3rd Party IP Camera to NVR

Description Follow the instructions below to connect a compatible IP camera with a Dahua NVR Prerequisites 3rd Party ONVIF Capable IP Camera.

Add Onvif Ipcam Dahua Device
Geovision Software Firmware Downloads
How to connect camera to the phone without ethernet cable?

Description

Follow the instructions below to connect a compatible IP with a Dahua

Prerequisites

  • 3rd Party ONVIF Capable IP Camera.
  • of 3rd Party Camera.
  • Ports used by 3rd Party Camera
  • User Name and to 3rd Party Camera

Note: When you are using third party you might have the full features, like motion detect.

Instructions

1. From the Main Menu Select Camera.

Thirdpartyipwiki.png

2. Select .

Thirdpartyipwiki2.png

3. You can select the brand of the third party camera or ONVIF. If brand is not listed, you will need to set the IP camera to the ONVIF protocol from the camera itself if it is available as an option.

Thirdpartyipwiki3.png

4. Enter the IP address of the 3rd party camera.

Third party1.png

5. ports are port 554 and HTTP Port 80. It is possible the third party camera are on different ports than what is showing on the Dahua recorder. You will need to login into the third party camera and check which ports they are on as each device needs to be on the same ports. Enter User Name and Password of 3rd Party Camera and select OK to save.

Third party3.png

COMMENTS

WORDPRESS: 0
DMCA.com Protection Status