Use Super Password to Reset on Reolink NVR

HomeGuideHow To

Use Super Password to Reset on Reolink NVR

If you forget the password of Reolink NVR, you may create a super password via Super Password application, then use it to reset your NVR password and

Hikvision password reset using SADP tool video
Annke Vision – Unlock the System Password Reset
How to Reset the Password of Annke Hikvision POE Cameras?

If you forget the password of Reolink NVR, you may create a super password via Super Password application, then use it to reset your NVR password and set a new password.

Note: Super Password is only for Windows OS, not for Mac OS.

Here we will guide you to reset the password of your PoE NVR by using the super password in the following steps.

Note: To get the Super Password application package, you can download it from the link below: https://s3.amazonaws.com/reolink-storage/website/download/SuperPassword.exe. If you fail to download it, you can contact support.

Step 1: Connect the NVR to a monitor by HDMI cable. (If there is no display, please connect it to a VGA monitor and change the pixel to 1920*1080.)

Step 2: Login in the NVR and click Forgot Password button.
Forgot Password Button on the System login Interface

Then you will get this page:

Step 3: Open Super Password application installed on the computer, then input the random code.
Super Password Interface

Step 4: Click Create Super Password to create a super password.
Create Super Password

Step 5: Go back to the System Login interface on the monitor of NVR. Input the generated super password, then click the OK button.

Input Super Password

Note: When you finished the steps above, the password of your NVR will be successfully reset and the old password will be removed.

Step 6: Create a new password for logging in.
Create a New Password

Step 7: Start to set up configurations on the Setup Wizard interface.
General Configuration on Setup Wizard

Step 8: Click Finish button when you set up all the configurations.
DST Configuration

Done! You have successfully reset the password of your NVR. Now you can make login with the new password.

How to Reset Reolink NVR Recorder’s Password

If you forgot your NVR password, you may refer to the following two methods to reset your password.

Method 1. Reset the Password by Pressing the Reset Button

Step 1. Reboot your device and make sure you can see the live-view on the monitor screen.

Note: Please stay on live view page through the whole process. Please make sure the nvr system on live view page instead of the logging page while pressing the button
Press the usb mouse and make sure all icons hidden and nvr in live view on the monitor.

mceclip0.png

Step 2. Remove the outer casing of the NVR using the screwdriver.

Step 3. Press the Reset button for 10 seconds until you hear the buzzing “bee”.

The Reset button of WiFi NVR:

Reset Button of WiFi NVR

The Reset button of 8-Channel NVR:

Reset Button of 8-Channel NVR

The Reset button of 16-Channel NVR:

Reset Button of 16-Channel NVR

Step 4. After the Setup Wizard pops out, create a new password and follow the Setup Wizard to complete the setup.

COMMENTS

WORDPRESS: 0
DMCA.com Protection Status