ACH20-1B Thermal Monocular Camera: Using the App

Take some time to learn about using your thermal monocular camera through the companion Thermal Connection app.

Live View Settings

The Live View is the first screen you will see when your camera connects to the app. It includes the following features:

Digital Zoom

Zoom in on a certain part of your camera’s image to magnify details.

1.From Live View, tap .

2.Tap your preferred zoom range.

3.Tap OK to save.

Color Palette

Select your camera’s color palette for enhanced visual representations of thermal imaging.

1.From Live View, tap .

2.Tap on one of the following color palettes:

Note: Not all color palettes are suited for every situation. Select the option that best shows the thermal differences for your specific application.

Record Images & Videos

1.From Live View, tap .

2.Tap the screen to display the capture and record icons.

3.To capture images: Tap .

4.To start or stop recording videos: Tap .

Note: A blinking red dot next to a recording timer on the left of the screen indicates that your camera’s recording.

Function Settings

Enable some of your camera’s features, like the laser pointer, fire detection, or track hot and cold points.

Laser Pointer

Use the laser pointer to illuminate a point of interest with a bright spot of colored light.

 LASER RADIATION:

Exposure to laser light can cause significant damage to the eyes. Never look into the laser beam directly or through a piece of optical equipment.

After a few seconds, the laser pointer automatically turns off.

Fire Detection

Detect fires in your camera’s image with a red box surrounding the source. If enabled, you can set the fire detection sensitivity from high to low.

Hot & Cold Points

Track the hottest and lowest temperatures in your camera’s image at the same time. If enabled, your camera’s image will display a red target tracking the hottest point and a blue target tracking the lowest point.

System Settings

Customize your camera’s system settings or sign out.

Automatic Sleep Mode

Select how long your camera waits before entering sleep mode.

Automatic Shutdown

Select how long your camera waits before turning off.

Change Measurement Unit (Meter to Feet)

Change your camera’s measurement unit.

Sign Out

Disconnect your camera from the app by signing out of the app.

Restore to Default Settings

Restore your camera’s menu and app settings to its factory default settings.

ACH20-1B Thermal Monocular Camera: Troubleshooting

The following article provides some troubleshooting tips for using your thermal monocular camera.

.

Camera’s image/screen is blurry.

Adjust your camera’s diopter to your eyesight. Before you begin, it is highly recommended that you adjust your camera’s diopter to your eyesight. Focusing your view will minimize eye strain and fatigue.

Camera’s Wi-Fi hotspot is not showing.

• Wait a moment for it to appear in your phone’s Wi-Fi settings.

• When enabling your camera’s hotspot in your camera’s settings, try to press  a couple more times.

• Ensure you have allowed the app to use your location, otherwise it will not be able to detect your camera’s Wi-Fi. Navigate to your phone’s settings, then open the Thermal Connection app settings, and enable Location — While Using the App.

Camera is not connecting to the app.

The Wi-Fi password is case sensitive. Make sure you enter the serial number in the same letter format, whether that is uppercase or lowercase.

Camera has disconnected from the app.

Camera’s Live View is frozen in the app.

If the Live View is frozen perform a hard close of the app, then open it again.

Digital zoom is not working.

Digital zoom will not work while your camera’s menu is open. Press  to exit the menu.

Camera is not recording images and videos.

Recording images and/or videos will not work while the menu is open or when your camera is connected to a computer. Press  to exit the menu.

Camera’s screen is black.

Restart your camera. Press and hold  to turn your camera off, and then back on.

Camera is not charging or slow to charge.

• Ensure you use the supplied micro-USB cable and that it is properly connected.
 DANGER

◦ Improper battery replacement or use may result in fire, explosion, or other hazards.

◦ Only use accessories regulated by the manufacturer. Never use the charging cable or power adapter with another product.

◦ Make sure the plug is properly connected to the power socket.

◦ DO NOT charge your camera within 2 m of flammable materials.

◦ DO NOT connect multiple devices to one power adapter. The plug in the power socket could overheat and possibly cause a fire.

• Ensure the USB Mode is set to Off.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to USB Mode.

◦ Press  to open the setting.

◦ Press  to select Off.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

Camera’s battery keeps draining.

You can preserve your camera’s battery life in the following ways:

• Turn off any camera settings or functions that are not being used.

• Use your camera without the app. First, sign out your camera from the app, and then turn the Wi-Fi hotspot off. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to WiFi.

◦ Press  to open the setting.

◦ Press  to select Off.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• Set your camera to go into automatic sleep mode after 1 minute of inactivity has passed. First set your camera’s sleep mode (Suspend Mode) to be automatic, and then set the automatic sleep mode (Auto Suspend) to 1 minute.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to Suspend Mode.

◦ Press  to open the setting.

◦ Press  to select Automatic.

◦ Press  to confirm your setting.

◦ Press  to navigate to Auto Suspend.

◦ Press  to open the setting.

◦ Press  to select 1 Min.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• Set your camera’s screen brightness to low.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to Brightness.

◦ Press  to open the setting.

◦ Press  to select Low.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• Set your camera’s automatic shutdown to 60 minutes or less. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to Auto Shutdown.

◦ Press  to open the setting.

◦ Press  to select 60 Mins or less.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

Camera’s image has lots of graininess or scratches.

• Turn your camera off, attach the lens cap, and allow it to rest for a few hours before using again.

• To improve your camera’s image quality set the FFC Mode to Auto. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to FFC.

◦ Press  to open the setting.

◦ Press  to select Auto.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• To manually correct pixel defects in your camera’s image, set the DPC settings to Manual. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to DPC.

◦ Press  to open the setting.

◦ Press  to select one of the options:

· Auto: (Default) Your camera automatically calibrates defective pixels.

· Press  to start auto DPC.

· Close the lens cap until your camera signals that auto correction is complete.

· Manual: Correct the defective pixels manually.

· Press  to start DPC manually.

·  Press to switch between the X-axis and Y-axis.

· Press and hold  or  to start correction.

· Restore: DPC is restored to original state.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

ACH20-1B Thermal Monocular Camera: Frequently Asked Questions

The following FAQ answers many of the general questions about your thermal monocular camera.

.

How does my thermal monocular camera work?

To improve the visibility of objects in complete darkness, haze, or tough conditions, your thermal monocular camera uses infrared sensors to detect heat given off by a person, animal, or other objects. It creates images of that radiation called thermograms, which display the relative temperatures of different objects with different shades or colors. In a thermogram, warm objects stand out in a contrast or often cooler background. It is widely used in outdoor scenarios for hunting, rescue, animal observation, and more.

Is my thermal monocular camera battery-operated or hard wired?

Your thermal monocular camera is battery-operated, however, to charge the battery you will need to connect the micro-USB cable into your camera’s USB port and the other end into a power source.

Does my thermal camera only work at night?

No. Although thermal imaging cameras are most commonly used for nighttime vision, they can also be useful in daylight. The detection of heat radiation and the high contrast of thermal imaging cameras allow you to see the outlines of (warm-blooded) animals that camouflage well in their environments. It can also help distinguish animals or people in foggy or smoky conditions.

Can my thermal camera see-through walls, metal, or glass?

No, thermal imaging cameras do not see-through surface but detect surface temperatures.

Is thermal imaging and night vision the same thing?

No, thermal imaging can produce pictures without visible light while night vision cameras work by boosting ambient light. Their only common purpose is increasing visibility in low light conditions.

Can bright sunlight damage my camera’s lens?

Yes, aiming your camera’s lens with the lens cap open at powerful light sources (i.e. the sun) is not recommended, as this may adversely affect the accuracy or damage the thermal imager.

What is the clicking noise my camera makes?

This is simply the noise your camera makes while you are shifting it between different fields of view. The noise you are hearing is your camera focusing and calibrating the image to achieve the highest resolution possible.

Should I charge my camera’s battery before first use?

Since your camera’s battery is delivered partially charged, it is recommended that you fully charge it before first use.

How do I charge my camera’s battery?

Your camera has the following 4 battery charging statuses, as shown by the LED charging indicator located under the USB port.

How do I turn my camera on or off?

Press and hold .

Where can I find the mobile app?

The Thermal Connection Application can be downloaded on your smartphone with a valid Internet connection from iTunes or Google Play respectively.

See the article Connecting to the App for more details.

Why do I need to allow my Location Permission on the app?

The app requires permission to detect your Wi-Fi network in order to connect your camera to the app.

How do I connect my camera to the app?

See the article Connecting to the App for full details.

How do I disconnect my camera from the app?

For steps on disconnecting your camera from the app, see the article Using the App.

What is my camera’s Wi-Fi name and password?

Where can I find my camera’s serial number?

Your camera’s serial number can be found on:

• The serial tag located on the side of your camera.

• Your camera’s system information.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to (System Information).

◦ Press  to open your camera’s system information.

How do I record images & videos?

• To capture images: Press 

• To start or stop recording videos: Press and hold  for 3 seconds. A blinking red dot next to a recording timer on the left of the screen indicates that your camera is recording.

Note: Your camera cannot record images or videos while the menu is open or when connected to a computer.

For steps on recording images and videos from the app, see the article Using the App.

How do I zoom in my camera’s image?

To switch the zoom range: Press . Keep pressing to zoom in and out.

For steps on using digital zoom from the app, see the article Using the App.

How do I turn the laser pointer on?

 LASER RADIATION:

Exposure to laser light can cause significant damage to the eyes. Never look into the laser beam directly or through a piece of optical equipment.

To turn the laser on: Quickly press  two times.

For steps on using the laser pointer from the app, see the article Using the App.

How do I change my camera’s color palette?

To quickly change the color palette: Press .

For steps on switching the color palette from the app, see the article Using the App.

Which color palettes can I choose from?

Select your camera’s color palette for enhanced visual representations of thermal imaging. Switch between any of the following color palettes:

Note: Not all color palettes are suited for every situation. Select the option that best shows the thermal differences for your specific application.

How do I measure my target’s distance?

Measure the range distance between your camera and your target using the pre-set ranging modes for animals, people, etc.

• Press and hold  to open the menu.

• Press  or  to navigate to Ranging Mode.

• Press  to open the setting.

• Press  to select one of the options:

◦ Wolf: Measure your distance from a wolf, with a pre-set height of 1.2 m.

◦ Customize: Enter a custom height to measure your distance from your target.

◦ Wild Boar: Measure your distance from a boar, with a pre-set height of 0.9 m.

◦ Human: Measure your distance from a human, with a pre-set height of 1.8 m.

◦ Rabbit: Measure your distance from a rabbit, with a pre-set height of 0.3 m.

• Press  to confirm your setting.

• Press  to exit the menu.

How do I change my camera’s measurement unit?

For steps on changing the measurement unit from the app, see the article Using the App.

How do I track hot & cold points?

Track the hottest and lowest temperatures in your camera’s image at the same time. If enabled, your camera’s image will display a red target tracking the hottest point and a blue target tracking the lowest point.

• Press and hold  to open the menu.

• Press  or  to navigate to Hot Point.

• Press  to open the setting.

• Press  to select one of the options:

◦ Off: Hot and cold points is turned off.

◦ On: Your camera will track hot and cold points.

• Press  to confirm your setting.

• Press  to exit the menu.

For steps on enabling hot & cold points from the app, see the article Using the App.

How do I enable fire detection?

Detect fires in your camera’s image with a red box surrounding the source. If enabled, you can set the fire detection sensitivity from high to low.

• Press and hold  to open the menu.

• Press  or  to navigate to Fire Warning.

• Press  to open the setting.

• Press  to select one of the options:

◦ Off: Fire detection is turned off.

◦ High, Middle, or Low: Your camera will detect fires based on the sensitivity level.

• Press  to confirm your setting.

• Press  to exit the menu.

For steps on setting fire detection from the app, see the article Using the App.

How do I enable the fire detection alarm?

Set your camera to sound an alarm when fire is detected in the image.

Note: The fire detection alarm works only when your camera has fire detection enabled on either High, Middle, or Low.

• Press and hold  to open the menu.

• Press  or  to navigate to Alarm.

• Press  to open the setting.

• Press  to select one of the options:

◦ Off: Fire detection alarm is turned off.

◦ On: Your camera will sound when fire is detected.

• Press  to confirm your setting.

• Press  to exit the menu.

How do I export recordings?

Export recorded images and videos from your camera’s microSD card.

• Press and hold  to open the menu.

• Press  or  to navigate to USB Mode.

• Press  to open the setting.

• Press  to select Mass Storage.

• Press  to confirm your setting.

• Connect the micro-USB cable into your camera’s USB port and the other end into an available USB port on your computer.

• The microSD card’s storage will open on your computer desktop. Select files to export, then copy them onto your computer.

• After exporting, disconnect the micro-USB cable from your camera and computer.

• Press  to select USB Mode Off.

• Press  to confirm your setting.

• Press  to exit the menu.

Where does my camera store recorded images and videos?

Your camera stores recorded images and videos onto the microSD card.

What is my camera’s maximum storage capacity?

You can insert a microSD card with up to 256GB storage space.

How do I hide the icons on the top right of my camera’s image?

• Press and hold  to open the menu.

• Press  or  to navigate to Status Bar.

• Press  to open the setting.

• Press  to select Off.

• Press  to confirm your setting.

• Press  to exit the menu.

How do I change the language displayed in my camera’s menu?

• Press and hold  to open the menu.

• Press  or  to navigate to Language.

• Press  to open the setting.

• Press  to select your preferred language.

• Press  to confirm your setting.

• Press  to exit the menu.

Note: This will only change the language in your camera’s menu, not the app.

How do I restore my camera’s settings to default?

For steps on restoring your camera’s settings to default from the app, see the article Using the App.

How do I update my camera?

Update your camera through the microSD card.

Note: To download the latest firmware update for your camera, contact the Technical Support team.

• Press and hold  to open the menu.

• Press  or  to navigate to USB Mode.

• Press  to open the setting.

• Press  to select Mass Storage.

• Press  to confirm your setting.

• Connect the micro-USB cable into your camera’s USB port and the other end into an available USB port on your computer.

• The microSD card’s storage will open on your computer desktop. Copy the update program to the microSD card.

• Press and hold  and  at the same time for 3 seconds. A blue screen will indicate that an update is in progress.

After a few minutes the update will complete and you will see your camera’s live view image.

Where can I download my camera’s latest firmware update?

To download the latest firmware update for your camera, contact the Technical Support team.

Can I mount my camera to a tripod?

Yes, the tripod thread can be found on the bottom of your camera.

Can I access my camera’s Live View from an external monitor?

Yes, you can access your camera’s Live View from your computer by connecting your camera using the micro-USB cable.

What is the buzzer option in the app settings?

The buzzer is not compatible with your camera.

ACH20-1B Thermal Monocular Camera: Connecting to the App

Follow the steps below to connect your thermal monocular camera to the Thermal Connection app.

Note: The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: Wi-Fi 2.4 GHz (2.4 GHz to 2.4835 GHz) 20 dBm.

.

Step 1 – Download the App

Download your camera’s mobile app, Thermal Connection.

.

Step 2 – Enable Your Camera’s Wi-Fi Hotspot

Looking into your camera:

• Press and hold  to open the menu.

• Press  or  to navigate to WiFi.

• Press  to open the setting.

• Press  to select AP (Access Point).

• Press  to confirm your setting.

• Press  the exit the menu.

Step 3 – Connect to the App

You will now be able to view your camera from the app and make some minor setting adjustments.

.

<p>The post Thermal Monocular Camera user manual first appeared on NVR IPCAMERA SECURITY.</p>

Lorex Fusion: Download the Lorex App

The following article provides instructions for downloading the Lorex App and connecting your Lorex Fusion Collection recorder to the app.

Prerequisite

Before you start, your Fusion recorder must be powered on and connected to your router using the included Ethernet cable. For Basic System Setup instructions, refer to your Fusion recorder’s Quick Start Guide or Manual on the product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

.

Download the Lorex App

Once your Fusion recorder has connected to the Lorex App, complete the final Fusion steps by connecting your Fusion Wi-Fi cameras and accessories.

For setup instructions using the new local UI, please see the article Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (New Local UI).

For setup instructions using the previous local UI, please see the article Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories.

Lorex Fusion: Frequently Asked Questions

The following frequently asked questions (FAQs) provide more information about your Lorex Fusion Collection. Where applicable, the FAQ includes links to articles where you may find more information.

Lorex Fusion Troubleshooting FAQ.

What is Lorex Fusion?

Our Lorex Fusion recorders incorporate the newest (fusion) technology to connect both Lorex Wired and Fusion Wi-Fi Cameras, Doorbells, Floodlights, and Sensors to one system. Lorex Fusion Wi-Fi Cameras and Accessories can connect to one recorder for continuous 24/7 recording and local, secure storage (up to 10TB). Everything can be accessed from your Lorex App for easy control of all devices.

.

Why do I get an offline message and a blank screen for the (B463AJ) 2K battery doorbell’s channel on the Fusion recorder?

Being a battery-operated doorbell, it will always go to sleep after a period of inactivity to conserve battery life. Once the doorbell is correctly paired to your Fusion recorder, the offline message means the doorbell has gone to sleep but is still connected and can be awakened. When motion is detected, or when the call button is pressed, there will be live video from that channel. You can also manually wake up the doorbell through the Lorex app, by activating the liveview.

.

Can my Battery Video Doorbell record continuously?

To conserve battery life, Wi-Fi Battery Video Doorbells only record when motion is detected. They do not record continuously.

.

Which recorders are part of Fusion?

For a list of Lorex Fusion Recorders, please refer to the Product Compatibility Chart.

.

Can I connect all Lorex Wi-Fi Cameras and Accessories to my Fusion recorder?

Only Lorex Fusion Compatible Wi-Fi Cameras and Accessories can connect to Lorex Fusion Recorders.

.

Which Lorex Wi-Fi Cameras and Accessories are part of Fusion?

See the following list of Lorex Fusion Wi-Fi devices:

.

Should I update my Lorex Fusion recorder’s firmware?

It is recommended to update your system firmware to the latest version to ensure remote connectivity and to support newly added Fusion Wi-Fi devices.

.

Does my Lorex Fusion recorder require a network setup?

Yes, a network setup is required to connect Fusion Wi-Fi cameras and accessories to your Fusion recorder. Ensure you connect the included Ethernet cable to your recorder’s LAN port and your router.

.

Does it matter which router I use?

Yes, due to its strong signal, the dual-band router is suitable for high resolution video recording and for connectivity between devices. Ensure that your Fusion Wi-Fi cameras and accessories and your Fusion recorder are all connected to a dual-band router (2.4 GHz/5 GHz bands).

.

How many Lorex Fusion Wi-Fi Cameras and Accessories can I connect to my Fusion recorder?

This depends on your Fusion recorder and the number of Fusion Wi-Fi channels it comes with. For full technical specifications, refer to the Product Specifications on your recorder’s product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

.

What is a Fusion Wi-Fi channel?

A Fusion Wi-Fi channel is the channel you use to add a single Fusion Wi-Fi camera to your system. A 16-channel security system with 8 PoE ports/channels (for wired camera connection) and 8 Fusion Wi-Fi channels means that 8 Fusion Wi-Fi cameras and accessories can connect to the entire system.

Note: Fusion Wi-Fi channel’s are only available on certain Lorex Fusion recorders. For a list of Fusion recorders, see the Product Compatibility Chart.

.

How many Fusion Wi-Fi channels are on my Lorex Fusion Recorder?

The number of Fusion Wi-Fi channels varies per Fusion recorder. For full technical specifications, refer to the Product Specifications on your recorder’s product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

.

How do I setup my Lorex Fusion system?

Complete your Fusion setup in the following order:

After connecting your Fusion system, ensure you adjust your Fusion settings.

.

Are there Fusion setup tutorial videos?

For a video walk-through of the Fusion setup with the new local UI (N845, N846, N847, N864, D863, D881 Series), please watch here.

For a video walk-through of the Fusion setup with the previous local UI (N841, N842, N843, N844, N861, D862, D871 Series), please watch here.

.

How do I setup my Lorex Fusion recorder and wired cameras?

For Basic System Setup instructions, refer to your recorder’s Quick Start Guide or Series Manual on the product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

.

How do I connect my Lorex Fusion Wi-Fi camera or accessory to my Fusion recorder?

For full setup instructions, please click on the article corresponding with your model number.

.

Which password should I enter to connect my Lorex Fusion Wi-Fi camera or accessory to my Fusion recorder?

Enter the same password that you created in the Lorex App when setting up your Fusion Wi-Fi device.

.

What is continuous recording?

Once your Lorex Fusion Wi-Fi camera connects to your Fusion recorder, your camera’s recording settings are automatically set to continuous. This means that your Fusion Wi-Fi camera will record 24/7 or for the entire duration of the recording schedule onto your Fusion recorder’s hard drive. It is worth noting that recordings on the camera are limited due to the size of its onboard storage, while recordings on the recorder are extensive (3TB to 10TB). Continuous recording captures everything in the background, and you can playback to catch anything you missed.

.

Do all Lorex Fusion Wi-Fi cameras record continuously?

No, to conserve battery life, battery-operated video doorbells do not record continuously (24/7).

.

How do I set my Lorex Fusion Wi-Fi camera to continuous recording?

After Fusion setup, your Wi-Fi camera is automatically set to Continuous recording. To adjust your camera’s recording settings, login to your recorder and navigate to the devices menu. For instructions, please see the article Lorex Fusion: Adjust Settings.

Note: Battery-operated video doorbells do not record continuously (24/7). Being a battery-operated doorbell, it will always go to sleep after a period of inactivity to conserve battery life. Once the doorbell is correctly paired to your Fusion recorder, the offline message means the doorbell has gone to sleep but is still connected and can be awakened. When motion is detected, or when the call button is pressed, there will be live video from that channel. You can also manually wake up the doorbell through the Lorex app, by activating the liveview.

.

How come I’m receiving duplicate notifications in the Lorex App?

After completing the Fusion setup, your Wi-Fi camera or accessory is connected to the Lorex App twice – once as a single device and then a second time as a device connected to your recorder. To avoid receiving duplicate notifications from the same camera or accessory, you will need to Turn off Alerts for your Wi-Fi device connected to your recorder. For instructions, please see the article Lorex Fusion: Adjust Settings.

.

After Fusion setup, where is my Lorex Fusion Wi-Fi camera’s video footage being stored?

Your Lorex Fusion Wi-Fi camera saves recorded motion detection videos onto the local microSD card (not always included). Once you’ve connected your Fusion Wi-Fi camera to your Fusion recorder, your camera’s recording settings is automatically set to 24/7 Continuous recording, and all recorded video is stored on your recorder’s extensive hard drive (up to 10TB).

.

What features are supported in my Fusion recorder vs. the Lorex App?

Please see the following list of features supported in either your Fusion recorder and/or the Lorex App:

.

Can I use my web browser to access my Lorex Fusion Wi-Fi camera?

You can only access your camera on the Lorex App, recorder, or on the Lorex Cloud Client.

.

When modifying the password in the Lorex Cloud Client, which password should I enter?

Enter the password for your Wi-Fi camera or accessory created in the Lorex App during setup.

.

Where can I order the Lorex Fusion Collection?

To order, go to lorex.com.

Lorex Fusion: Troubleshooting

The following article provides some troubleshooting tips for setting up your Lorex Fusion Collection.

.

My Fusion Wi-Fi camera or accessory is not appearing in the device list.

.

My Fusion Wi-Fi camera or accessory is not connecting to my Fusion recorder.

• Give your Fusion Wi-Fi camera or accessory a few minutes to establish a connection.

• Check to see if your Fusion recorder has the most up-to-date firmware. New Local UI: Login to your recorder and navigate to System > Update & Reset > Upgrade, then click Check for Updates.  Previous Local UI: Login to your recorder and navigate to Main Menu > Information > Update/Reset > Update, then click Check for Updates. For instructions on updating your recorder’s firmware through USB, see the article How to manually upgrade the firmware of your recorder.

• Ensure that your Fusion Wi-Fi cameras and accessories and your Fusion recorder are powered on.

• The same password created for your Fusion Wi-Fi camera or accessory in the Lorex App must be entered in your Fusion recorder. If you have forgotten the password, then reset your Fusion Wi-Fi camera or accessory and connect it to the app again.

• (Applies to the previous local UI only) If your password for your Fusion Wi-Fi camera or accessory is entered incorrectly in your Fusion recorder, then your Wi-Fi device will lock itself. Reset your Fusion Wi-Fi camera or accessory and connect it to the app again.

• Ensure that you are entering the password for your Fusion Wi-Fi camera or accessory created in the Lorex App, and not the Lorex App account password. Those are two separate passwords.

• Ensure that your Fusion Wi-Fi camera or accessory is connected to a dual-band router (2.4 GHz/5 GHz bands).

• Ensure that you are connecting the Fusion Wi-Fi camera or accessory to an available Fusion Wi-Fi channel, and not a Wi-Fi channel that already has a Wi-Fi device connected to it.

.

I don’t know the password for my Fusion Wi-Fi camera or accessory.

If you don’t know the password for your Fusion Wi-Fi camera or accessory, then you will need to reset the device and connect it to the Lorex App again.

To reset your Fusion Wi-Fi camera or accessory:

.

I’m receiving duplicate notifications in the Lorex App.

After completing the Fusion setup, your Wi-Fi camera or accessory is connected to the Lorex App twice – once as a single device and then a second time as a device connected to your recorder. To avoid receiving duplicate notifications from the same camera or accessory, you will need to Turn off Alerts for your Wi-Fi device connected to your recorder. For instructions, please see the article Lorex Fusion: Adjust Settings.

Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (N910 Series)

The following article provides instructions for connecting your Lorex Fusion Collection Wi-Fi Cameras and Accessories to your N910 Fusion recorder.

.

Our Lorex Fusion recorders incorporate the newest (fusion) technology to connect both wired and Wi-Fi cameras, doorbells, floodlights, and motion sensors to one system. All Fusion compatible Wi-Fi cameras and devices connect to one recorder for continuous 24/7 recording and private local storage. Access everything from the Lorex App for easy control of all devices.

Note: To conserve battery life, Wi-Fi Battery Video Doorbells only record when motion is detected. They do not record continuously.

For any connection issues, see the article Lorex Fusion: Troubleshooting.

.

Part One — Wired Setup

Setup your Fusion recorder and wired cameras. For Basic System Setup instructions, refer to your recorder’s Quick Start Guide or Manual on the product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

Important: Network setup is required for your system — use the included Ethernet cable to connect your recorder to your router.

.

Part Two — Connecting your Lorex Fusion Wi-Fi Camera

Connect your Lorex Fusion Wi-Fi Camera to the app and then from your recorder scan your network to add it.

.

Option A — Connecting Your New Lorex Fusion Wi-Fi Camera to Your Recorder

Add compatible Lorex Fusion Wi-Fi Cameras and Accessories onto Fusion Wi-Fi channels on the recorder.

To connect your New Lorex Fusion Wi-Fi Camera to the recorder:

Note:

.

Option B — Connecting Your Existing Lorex Fusion Wi-Fi Camera to Your Recorder

Add compatible Lorex Fusion Wi-Fi cameras and accessories onto Fusion Wi-Fi channels on the recorder.

Note:

To enable remote viewing for the mobile app, you will need to:

To connect your Existing Fusion Wi-Fi camera to the recorder:

1.From the Live View display, click the pair icon  in the center of the Fusion Wi-Fi channel’s screen.

Note: It may take a few minutes for your Lorex Fusion Wi-Fi Camera’s video feed to appear.

To turn off duplicate notifications, adjust your camera’s recording settings, or link motion sensors to cameras, see the article Lorex Fusion: Adjust Settings.

Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (N845, N846, N847, N864, D863, D881 Series)

The following article provides instructions for connecting your Lorex Fusion Collection Wi-Fi cameras and accessories to the Lorex App and to your Fusion recorder.

Note: These Fusion instructions apply to the new local UI only. For Fusion instructions that apply to the previous local UI, please see the article Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories.

.

Before you start

.

Watch the Lorex Fusion setup tutorial video

For a video walk-through of the fusion setup, please watch here.

.

Connect your Fusion Wi-Fi cameras and accessories to the Lorex App

Follow the Lorex App steps to add your Lorex Fusion Wi-Fi cameras and accessories. Refer to your camera’s documentation at help.lorextechnology.com for detailed setup instructions. Search your camera’s model number to access the product support page.

Note:

2.In-app, tap the  icon to add your Wi-Fi camera.

.

Connect your Fusion Wi-Fi cameras and accessories to your Fusion recorder

Note: You can add one Wi-Fi camera or accessory to one Fusion Wi-Fi channel. The number of Fusion Wi-Fi channels varies per Fusion recorder. For full technical specifications, refer to the Product Specifications on your recorder’s product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

2.From the Live View display, click the pair icon  from the center of the Fusion Wi-Fi channel.

Note: If your Lorex Fusion recorder and Fusion Wi-Fi camera share the same password, then the devices will automatically connect without entering the password.

.

After successfully connecting to your Fusion recorder, your Fusion Wi-Fi camera or accessory connection status turns green. For any connection issues, see the article Lorex Fusion: Troubleshooting.

To turn off duplicate notifications, adjust your camera’s recording settings, or link motion sensors to cameras, see the article Lorex Fusion: Adjust Settings.

Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (N841, N842, N843, N844, N861, D862, D871 Series)

The following article provides instructions for connecting your Lorex Fusion Collection Wi-Fi cameras and accessories to the Lorex App and to your Fusion recorder.

Note: These Fusion instructions apply to the previous local UI only. For Fusion instructions that apply to the new local UI, please see the article Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (New Local UI).

.

Before you start

.

Watch the Lorex Fusion setup tutorial video

For a video walk-through of the Fusion setup, please watch here.

.

Connect your Fusion Wi-Fi cameras and accessories to the Lorex App

Follow the Lorex App steps to add your Lorex Fusion Wi-Fi cameras and accessories. Refer to your camera’s documentation at help.lorextechnology.com for detailed setup instructions. Search your camera’s model number to access the product support page.

Note:

2.In-app, tap the  icon to add your Wi-Fi camera.

.

Connect your Fusion Wi-Fi cameras and accessories to your Fusion recorder

Note:

After successfully connecting to your Fusion recorder, your Fusion Wi-Fi camera or accessory connection status turns green. For any connection issues, see the article Lorex Fusion: Troubleshooting.

To turn off duplicate notifications, adjust your camera’s recording settings, or link motion sensors to cameras, see the article Lorex Fusion: Adjust Settings.

Lorex Fusion: Adjust Settings

The following article provides instructions for adjusting your Lorex Fusion Collection settings.

.

Turn off duplicate notifications

After completing the Fusion setup, your Wi-Fi camera or accessory is connected to the Lorex App twice – once as a single device and then a second time as a device connected to your recorder. To avoid receiving duplicate notifications from the same camera or accessory, you will need to Turn off Alerts for your Wi-Fi device connected to your recorder.

To turn off duplicate notifications:

2.Under your Fusion recorder, swipe left to find your Fusion Wi-Fi camera or accessory.

3.Tap on your Fusion Wi-Fi device’s notification icon .

.

.

Adjust the recording settings for your Fusion Wi-Fi camera or accessory

After Fusion setup, your Lorex Fusion Wi-Fi camera’s recording settings will automatically adjust to Continuous, recording 24/7 directly to your recorder’s hard disk drive.

To adjust the recording settings (new local UI):

To adjust the recording settings using the previous local UI, navigate to Main Menu > CAMERA > Recording > Recording and follow the same steps as above.

.

Set the recording schedule for your Fusion Wi-Fi camera or accessory

You can set a custom recording schedule according to your needs. For example, you can set the system to record continuously during business hours and record on motion detection only outside of business hours.

• Click-and-drag on each day to customize the recording schedule. The schedule is set up as a grid, with each block representing two hours.

• Click  beside 2 or more days to link schedules (). This allows you to quickly change multiple schedules at once.

• To make fine adjustments to a schedule, click . This will allow you to set exact start and end times for a schedule.

• To disable all recording of the selected type on the selected day, click .

To set the recording schedule using the previous local UI, navigate to Main Menu > STORAGE > Schedule and follow the same steps as above.

.

Link sensors to cameras

Once you’ve completed the Fusion setup, you can link motion and door/window sensors to any compatible camera, so that when the sensors are triggered the linked automatically cameras record.

.

To learn more about using your Lorex Fusion system, visit the Fusion page or refer to the Lorex Fusion: Frequently Asked Questions article.

.

<p>The post Lorex Fusion Troubleshooting FAQ first appeared on NVR IPCAMERA SECURITY.</p>

These setup discrepancies often translate into unreliable readings and missed opportunities, rendering the system less effective in its primary task of accurate number plate recognition. The good news is that with proper optimization, these systems can be significantly improved. In this comprehensive guide, we will explore practical methods to enhance ANPR accuracy with best practices for camera setup.

Whether you are a seasoned professional or an enthusiastic beginner, these techniques will enable you to maximize the potential of your ANPR system, ensuring precise and reliable results. 

The Basics of ANPR Technology

ANPR technology is a sophisticated system designed to automatically capture and interpret license plates on vehicles. By leveraging advanced algorithms and optical character recognition (OCR) technology, ANPR systems can rapidly analyze images or video frames, extract license plate information, and convert it into readable digital data. 

In other countries, ANPR is also referred to as Automatic License Plate Recognition (ALPR) and, simply, License Plate Recognition (LPR). 

Here’s a breakdown of the key components of ANPR technology:

Components of an ANPR System

Understanding these fundamental components is essential for users aiming to optimize their ANPR systems. With a clear grasp of the technology’s basic principles, individuals can proceed to implement the necessary adjustments and enhancements for improved accuracy and reliability.

Best ANPR Camera System Setup

Read More : How To Install Synology Surveillance Station

Factors Impacting Your ANPR Camera Setup

There are a number of fundamental components that make any ANPR Camera setup successful. These include:

Of these three, we see that camera setup holds the most potential for improvement for businesses and consumers to significantly bolster their ANPR results. We draw this conclusion because we know that our Plate Recognizer ANPR engine has been thoroughly tested and optimized to handle blurry, low-resolution, and dark images as well as other aspects of the real-world environment.  Feel free to reference the results of our ALPR benchmarking exercise. 

Further, counter to claims from camera manufacturers, we see that a modest, mid-range or even low-end IP camera performs just as well as a high-end, expensive camera.  Of course, no LPR camera vendor is going to admit this because they need a way to justify their existence.  As a side note, we even have customers running our software with existing CCTV cameras.

From our years of experience supporting and helping clients troubleshoot their license plate recognition systems, we have observed how the proper camera setup along with a strong ANPR engine can be an effective solution to detect and decode vehicle license plates.  This article offers specific tips and suggestions on how to best set up your camera to maximize your ANPR.

Before You Begin, an Important Note

With your ANPR Camera Setup, please keep in mind that if your eyes can easily read a license plate through the camera, our ANPR engine can too. However, if you’re squinting and struggling to see the license plates, our engine might find it challenging as well. Visual clarity is the key. A clear view means accurate reads.

Camera Zoom For The Best ANPR Systems

When it comes to zooming the camera for best ANPR, it is important to avoid having a high-level view of the overall parking lot or site.  This is called under-zooming, where the camera is capturing an overall wide-angle view of the landscape.  So the above two images are not set up correctly for best ANPR results.

For beginners handling license plate recognition, there is a common misconception that a wide-angle shot is the best.  Cameras will seek to aim wide across parking lots rather than towards entrance or exit points which allow them to truly pick up plates and get a good read. 

To address this, adjust the camera positioning and zoom in on the ingress and egress areas of the parking lot.  Rather than have a wide-angle view of the street with all the homes around it, it is better to focus on just the street itself where cars are driving by.

In the photo below, the left image shows a wider angle of the gate entrance. For best practices ANPR, it is important to zoom the camera closer to the gate.  Again, if the camera can see the vehicle plate well, then our ANPR engine ought to do a very good job of reading the plate.

If you are in an area using CCTV cameras, Plate Recognizer’s software may still work. While CCTV cameras are typically on the lower end of the quality spectrum, they may still be suitable to capture vehicles moving at low speeds.

ANPR Camera Setup: Ideal Camera Distance 

The maximum advisable distance between the camera and the vehicle is 35 meters.  Actually, whenever possible, it is preferred to minimize that distance.  Why? Minimizing the distance between the camera and the vehicle helps ensure that the camera can easily focus without the need to zoom in on the target vehicle.  This helps reduce image blurriness.

When you place the camera far away from the vehicles it needs to read, you will need a camera with very strong zoom capabilities. The more the camera uses the zoom, the harder it is for the images to come out clear and crisp. 

Another cause for blurry images can be if the camera is mounted improperly, or becomes loose. Typically, ANPR cameras are outdoors and exposed to the elements so this is going to happen at some point if the cameras aren’t installed securely. This can cause the camera to move, shake or vibrate.  These small vibrations can result in image blurriness when the zoom level is high.  For example, you can test this yourself by using your smartphone camera and zooming in all the way to view a car in the distance.  Apply a small amount of movement to the camera and you can easily observe how the camera view totally changes!

We have actually tuned our algorithms and even added a new parameter called Merge Buffer to help accommodate camera vibrations.

PRO TIP: Use Your Mobile Phone to Do a Test

Before you set up the camera, use a mobile phone as a test subject. Place the phone in the position where you intend to install your ANPR camera. Set the smartphone to the number of pixels and settings of the camera you plan to purchase.  Then, just record 10 minutes of footage and use Stream to analyze the recorded video for license plate recognition.

Camera Angle To Improve ANPR

While Plate Recognizer ANPR has been tuned to support a wide variety of license plate angles, it’s always ideal to have the camera set up appropriately. In terms of angle, the setup of the ANPR camera can be positioned in two ways: slope, vertically, and horizontally.  For both cases, it is advisable to have a maximum of 45 degrees for a proper read of the license plate. 

Remember, just because you set up your camera for 45 degrees, your customers/drivers don’t always drive in a straight line!  

ALPR vendors can make outrageous claims that their software can do anything, but at Plate Recognizer, we’re not going to lie to you. There are things our software can do, and things it can’t!  Not every angle is going to be possible, and no camera is going to be a super machine that can see a license plate while bending over backward in the middle of a blizzard. 

So for example, Plate Recognizer’s ALPR engine can support up to a 53-degree tilt, and a 70-degree side angle. What it can’t do is catch a plate number at 75 degrees.

In fact, we’ve compiled real-world ALPR results.  Take a look.

Minimum Resolution For Best ANPR

We see a lot of unsuccessful LPR due to very fuzzy images of the license plate.  This is by and large due to the fact that the camera does not have the resolution required to capture a good plate image.

While Plate Recognizer works with any IP camera, we recommend that the license plate itself must have roughly 100 pixels in width.  Otherwise, our ANPR engine may not be able to effectively read the license plate.

Since every LPR camera setup will be different, you’ll need to figure out the correct amount of megapixels (MPs) needed.  Basically, the number of megapixels required will ultimately depend on the distance of the camera to the license plate.

The width of the license plate will depend on the country you’re in.  Here are some examples:

Once you have an idea of the width of plates for your ANPR camera setup, you’ll need to figure out the MPs needed. There’s a bit of math here to calculate, so we’ll save you the headache and go straight to the answer.  

The table below summarizes the maximum distance in feet from the camera to the vehicle plate for each of the 3 major regions/countries.  You’ll note that we used 80 pixels of width for the plate, even though our ALPR benchmarking indicates that our engine can read a plate even at 30 pixels width.  We chose 80 pixels width to add some cushion–just to be on the safe side.

So net net, if you have to set the camera up at over 30 feet from the vehicle plate in the USA, then you’ll need to get a 4 MP camera or better.

PRO TIP: If the above topic on camera resolution is confusing, no worries.  Just use your eyes!  Basically, if you can see the license plate number in the camera footage with your own eyes, then Plate Recognizer’s engine should be able to read the plates, too. But if you’re having a really hard time seeing the plate–even after squinting and zooming in–then please don’t expert Plate Recognizer to do magic.

ANPR Camera Setup for Night-Time: Sufficient Infrared

If you have a great ANPR system, but no infrared (IR) light capabilities, you will have a tough time capturing plate numbers at night. This is because when it’s dark, there’ll be glare on the plate from the headlights.  If you’re using ANPR to detect crime, which often happens at night, you’d need to make sure you have good IR.

Infrared cameras utilize LED lights to illuminate the plate area with infrared light, which is invisible to humans.  Cameras with an IR cut filter automatically adjust IR light levels so that you can get consistent colored images in the daytime and black/white images at night.

Depending on the exterior lighting, you may be able to get a license plate read at night without IR, but it won’t have the same accuracy. Using IR may also help you pick up images in different weather conditions. For example, if you are in a location that gets a lot of rain, an ANPR system that relies on white and natural light will have a hard time getting accurate images. 

For optimal IR use, you’ll want to place the camera on an angle so it isn’t pointing directly at headlights. This will avoid unnecessary glare risks and ensure you’re getting a good shot of the license plate. 

If your current LPR camera doesn’t have IR, you can always buy an inexpensive external IR unit instead of upgrading your entire system. It costs around $20-25 on Amazon.  The IR technology built into a camera may also not be enough, so adding another external device can increase accuracy.

Lighting Tips for ANPR Camera Setup

Adjusting the lighting for your ANPR camera setup is essential to ensure optimal performance and accurate license plate recognition. Proper lighting helps to minimize shadows, glare, and overexposure, which can obscure or distort license plate images, leading to recognition errors. 

By providing even lighting and strategically positioning lighting sources, you can enhance visibility and clarity, particularly in challenging environments such as parking lots, highways, or private properties.

Here are a few lighting tips based on how you’re going to utilize your ANPR setup:

ANPR Camera Lighting for Parking Lots

For parked cars going in and out of a parking lot, the ideal lighting setup would typically involve evenly distributed and consistent lighting throughout the parking area. This helps ensure that license plates are clearly visible to ANPR cameras regardless of the vehicle’s position.

Other tips for optimal lighting in parking lots:

How does IR Lighting help with illumination?

IR lighting emits infrared light, which is invisible to the human eye but can be detected by camera sensors. By supplementing existing lighting sources with IR illumination, ANPR cameras can capture clear and accurate images of license plates even in challenging lighting environments where visible light may be insufficient. This enhances the overall visibility and image quality, allowing the ANPR system to reliably read and process license plate information regardless of lighting conditions.

Additionally, IR lighting helps minimize disturbances to nearby residents or drivers, as it is invisible and does not produce glare or excessive brightness. Overall, IR lighting plays a crucial role in enhancing the performance and effectiveness of ANPR camera setups, particularly in low-light or nighttime scenarios.

Many cameras come equipped with built-in IR capabilities. It’s important to ensure that the camera’s IR distance parameter is well-suited to the distance between the camera and the vehicle being monitored. This ensures that the IR illumination adequately covers the area where license plates are captured, enabling clear image capture for ANPR systems. 

However, in some cases, the built-in IR may not be sufficient to provide optimal illumination, particularly in larger or more challenging environments. In such situations, you may opt to purchase external IR units to supplement the camera’s built-in IR capabilities.

These external IR units can provide additional illumination, extending the effective range of the ANPR system and ensuring clear and accurate image capture, especially in low-light or nighttime conditions where visibility may be limited.

ANPR Camera Lighting for Highways

Highways, on the other hand, need different light requirements since cars are moving at high speeds. The lighting needs to provide sufficient illumination to capture clear and accurate images of license plates despite the fast-paced movement of vehicles. You can try doing the following:

The lighting setup for highways prioritizes high-intensity, uniform illumination to facilitate clear image capture of license plates, enabling ANPR systems to operate effectively in fast-moving traffic environments.

<p>The post Best ANPR Camera System Setup first appeared on NVR IPCAMERA SECURITY.</p>

How to properly install the security camera?

 When installing security cameras, LongPlus always recommends placing cameras up high. The outdoor installation location should be 7ft away from the ground. Here are the best places to install security cameras around your home: front & back doors, garage & driveway, yard, common areas, main stairway or hallway, or any side doors or large first-floor windows that an intruder could gain access through.

 🟠 Typically, home cameras are placed in the corners of the room to optimize the viewing angle. LongPlus recommends at least two cameras to fully cover a large space, such as a living room. To fully monitor your home, users can add cameras in each room to achieve a complete home monitoring system.

LongPlus Camera User Guide

Read Also : IMOU Ranger IP Camera How To Use

🟠 Battery cameras can not be installed behind a window/glass if you want to use the “Motion Detection” feature.

Battery cameras use PIR (passive infrared) motion detection, an energy-efficient (saving battery power) technology that captures motions by detecting infrared radiation (radiant heat) emitted or reflected by objects. When the camera is mounted behind a window/glass, infrared radiation does not pass through the window/glass. As a result, the “Motion Detection feature” does not work reliably. If you want the camera to detect motions outside, it is recommended that you mount the camera outside.

For plug-in/wired cameras, the answer is yes, as they use camera video analytics rather than PIR sensors to detect motions. As long as they “see”, they can detect motions. So you can mount the camera behind a window/glass with confidence.

How to find the serial number of LongPlus security camera?

🟠 Each LongPlus security camera has a serial number. These are usually located on the body label of the security camera, starting with S/N:*****. Also, if you’ve added your camera to the app, you can also tap the camera “setting” icon > tap the “>” extension icon > tap the “More info” button to find the camera’s serial number.

Is LongPlus security camera waterproof?

🟠 Yes. The waterproof rating of LongPlus camera is IP65. It can be “protected against water jets from any angle”. Generally, the camera can be used outdoors on ordinary rainy and snowy days. However, it may get damaged in extreme weather. But if the camera is installed under the roof or in a place with some shelter, it can get protection to a certain extent. Besides, please don’t expose the camera’s charging port, power button, and microSD card slot to water.

What do the indicator lights on LongPlus security camera mean?

🔵 Solid Blue Light – The camera is working properly.

🟡 Solid Yellow Light – The camera is charging.

🟢 Solid Green Light – The camera charging is complete.

⚪ No Light – The camera is in sleep/off mode.

Can I talk to someone via LongPlus App?

🟠 Yes, LongPlus security camera features two-way audio capability, which means you can listen and talk to someone in real-time with simple clicks in the App.

Do LongPlus security cameras need an app to work?

🟠 Yes! All LongPlus smart security cameras are connected to the LongPlus APP. Compatible and compatible with the latest versions of iOS/Android devices. Installing LongPlus app is a breeze and it comes with voice prompts to guide you step-by-step in minutes.

What is the default language of LongPlus security cameras?

🟠 The default language of LongPlus security camera is set during production and testing in the factory production process. After connecting with LongPlus APP, the language of the camera will follow the language of the APP.

Can I see the infrared light at night?

🟠 No, the night vision infrared light is invisible to human eyes. If you turn on your phone’s camera and point it at the camera lens, then you will be able to see it.

How to format a Micro SD card?

🟠 Sometimes after inserting a Micro SD card, the camera will report “Please use the app to format your SD card first”, that’s because your Micro SD card is not the FAT32 format that the camera supports. In this case, please tap the camera Setting icon > tap SD card > tap Format to format it.

How to record/save videos on a Micro SD card?

🟠 Installing a Micro SD card does not mean the camera will record a video to the Micro SD card all the time.

When the camera detects a movement, it will record a video to the cloud and the cloud recording will display in the Library in the app. If apart from the cloud recordings you want to save backup videos on a Micro SD card at the same time, you can insert a Micro SD card into the camera.

🟠 Here are tips:

1. Find the Micro SD card slot and insert your Micro SD card: Mostly, the Micro SD card slot is next to the power button and is under the rubber plug of the camera body. However, for some models of cameras, you may need to take off the outer shell of the camera to find the Micro SD card slot.

2. If the Micro SD card is detected, you will hear “SD card detected” at the time when it is inserted, and you can see both the storage of the Micro SD card and “SD Card Video” in the app.

Please note that the camera only supports legitimate brand-name (SanDisk, Samsung, Kingston) Micro SD cards, but may not be able to support no-brand, fake, expansion (the storage is extended), and read-only (you aren’t able to put a file to it) Micro SD cards

How to view videos on the Micro SD card?

You can view videos on the Micro SD card from the app or on your computer.

To view videos on the Micro SD card from the app, please tap the camera “setting” icon on the app homepage > tap “SD card video” on the “Camera Setting” page > select the date on the top > swipe the screen left and right until the green vertical line overlaps the grey “bubble”( If there is no grey “bubble”, that means there are no motions detected in that period).

If you want to zoom in on the specific time before playing a video, you can swipe two fingers left and right at the same time or tap the “magnifying glass” icon.

How to activate cloud storage?

🟠 The cloud storage we gift you is automatically activated and contains free 3 days rolling cloud storage. You can view the cloud-stored videos in the last 7 days at any time.

When the SD card is full will it overwrite the older files?

🟠 Yes, when the SD card is full, the camera will delete the earlier recorded video so you don’t need to format the SD card manually.

Can the camera be used without a memory card?

🟠 Without a memory card, the recorded video will be automatically saved in the cloud, you can watch the video for nearly 7 days in the cloud.

How long does it take to charge LongPlus camera once?

🟠 It will take about 8 -15 hours to fully charge the camera once. When the security camera is fully charged, the indicator light will turn solid green.

Why can’t the battery be charged?

🟠 The following factors may cause charge failure. Please check them one by one:

(1) The charging device is not suitable, or it malfunctions. Please make sure the power adapter and charging cable are in good condition. The power adapter specification is “5V/1.5A”.

(2) The charging port is defective. Possible causes include: the Micro USB cable and the charger or the charging port of the camera are not plugged in properly; there are objects in the charger or the charging port of the camera.

(3) Please confirm whether there are objects in the camera’s charging port or the charger port and clean it before charging.
Please ensure that the Micro USB cable is in good contact with the ports on both ends of the charger and camera.

(4) You can try to connect the Micro USB cable and the charger to other devices (such as mobile phones or computers) to see if they work normally. If anyone doesn’t work, please change to a new one to try again.

(5) The long-time operation leads to charge port oxidation or internal looseness. Please repair or replace the charge port immediately.
The charging cable is damaged or broken. Please replace the Micro USB cable that can work normally.

(6) The charging cable should not be too long. The required cable length is generally not more than 16 feet (5 m). Please replace the Micro USB cable with a suitable length.

(7) The charging environment is not suitable; excessively high or low temperature makes charging impossible. Please move to a place with an appropriate temperature environment (0°C ~ 45°C) for charging.

If the above are ruled out but the issue still persists, please submit feedback from the app for further technical assistance.

Why can’t the battery be used for a long time?

🟠 The battery life mainly depends on the total working duration of the camera. The following factors may lead to fast battery consumption. Please check them one by one:

1. Users frequently view live streams/The camera is frequently activated to record videos.
In order to make the camera work longer, please avoid turning on the live broadcast for a long time.

2. Poor Wi-Fi connection to the camera
If the camera’s Wi-Fi connection is bad or unstable, it will continue to actively search for networks, so the battery will drain quickly.
Please try to place the camera near the Wi-Fi router. Thick walls, bricks, ceramics, electromagnetic equipment, large amounts of liquid, and large metal objects can interfere with Wi-Fi signals. Please try to avoid these objects.

3. Extremely cold weather shortens battery life
The operating temperature of the camera is -10°~45 °C. Please do not place the camera in an extremely cold environment.

4. Night Sight will consume more battery power
When you enable Night Sight, the camera will enter night mode when the light is darker than the threshold (sensitivity level). Camera performance is improved when it is dark.
Therefore, for sharp nighttime images, we don’t recommend disabling it, although it may drain more battery power. But if you still want to disable it, you can tap the camera “Settings” icon > tap “Lighting Settings” > close “Night Sight”.

How can I extend the battery life?

🟠 The battery life is largely determined by the number of recordings and the number and duration of live. Here are the suggestions to extend the battery life:

(1) To reduce false triggers. Change the location or angle of the camera. Please allow us to explain how motion detection works: when the PIR sensor perceives a change in the environment, motion detection will be triggered. The change in the environment can be a moving object, light change, the alternation of hot and cold air, etc. Particularly common false triggers include trees shaking after being blown by the wind, the cold air of the air conditioning, etc.

(2) Set motion detection sensitivity to Low or Medium. After doing that, the distance the PIR sensor can detect will become shorter so that false triggers may be reduced.

(3) Shorten the recording duration of the camera. Currently, the camera-supported recording durations are 10 seconds, 15 seconds, 20 seconds, and automatic (up to 3 minutes). For your reference:

(4) Set Sleep mode. This feature allows you to schedule the working hours for the camera. Whether the camera enters sleep mode on schedule, or you enable Sleep, the camera will be deactivated. Under this condition, the live feed will not be accessed, motion detection (including push notifications, recordings, and camera alarm) will stop working. This can reduce power consumption to save battery life.

(5) If possible, you can try to watch live feeds or adjust camera settings on your mobile phones less frequently.

(6) To avoid or reduce the battery consumption caused by poor network connection. You can place the camera as close to the router as possible, and try to avoid thick walls, bricks, ceramics, electromagnetic wave equipment, a large amount of liquid, and large metal objects.

(7) We suggest that the camera be installed in a suitable temperature environment (14°F~113°F).

(8) It is generally not recommended that you turn off night vision, but if you do not need to monitor at night (watch live and video), you can turn off night vision.

Will Wi-Fi environment affect the camera battery?

🟠 Yes, an unstable or poor network environment will cause the camera to transmit data multiple times, the camera keeps actively searching for the network, or even reconnect to Wi-Fi continuously, which will result in faster battery consumption. Multi-layer concrete walls, brick walls, and overcrowded Wi-Fi channels will cause a bad Wi-Fi environment.

To save the camera’s battery life, please ensure that the network connection is strong.

How to charge the camera?

🟠 Connect the Micro USB cable to a 5V/1.5A power adapter.

🟠 Connect the other end of the USB cable to the camera.

🟠 Plug the power adapter into an electrical outlet.

🟠 Use the solar panel to charge.

Battery cameras can be used after being fully charged

How to add users or share your camera with another person?

Once you add a camera to the app, you become the admin of the camera. If you want to add an additional user to watch the camera on multiple devices, let’s say, you want to make another person (your family member or your friend) be able to access the camera on his or her phone, you can share your camera with that person.

🚩Note:

The shared user needs to download the app and register a new account first and the shared user will need to select the same country as you when registering.

Please check if shared user is in the same country/region as you. Click your/shared user avatar to go to “Personal information” >> check “Country” to see if you are in the same country.

If not, maybe you/shared user need to delete the account and re-register by selecting the same country/region to make sure you are in the same country. Click “Account security” >> select “Delete”, then you/shared user can re-register.

Below are the sharing steps:

Face to Face Sharing

Step 1 Generate the share QR code of the camera

The camera admin taps the Share icon () on the live window on the homepage or taps the Share button on the Camera Setting page, then taps the Camera sharing button to generate a share QR code of the camera.

Step 2 Scan the share QR code using the shared user’s phone

The shared user taps the + icon () on the top right of the homepage, then taps the Add Friend’s Camera button. He/she can also directly tap the Add Friend’s Camera button from the User page. Then scan the generated share QR code.

Step 3 Accept the camera access request

After successfully scanning the share QR code, the camera admin will receive a guest user request. Accept the guest user request, then the shared user will be able to see the camera on the homepage and access the camera. The Person icon indicates this is a shared camera. The camera admin can check the shared account on the Share page.

.

Remote Sharing

Step 1 Generate the share QR code of the camera

The camera admin taps the Share icon () on the live window on the homepage or taps the Share button on the Camera Setting page, then taps the Camera sharing button to generate a share QR code of the camera.

Step 2 The camera admin screenshots the share QR code and then sends it to the shared user.

Step 3 The shared user saves the screenshot.

Step 4 Scan the screenshot of the share QR code using the shared user’s phone

The shared user taps the + icon () on the top right of the homepage, then taps the Add Friend’s Camera button. He/she can also directly tap the Add Friend’s Camera button from the User page. Then tap the Picture icon on the top right and then choose the saved screenshot to scan.

Step 5 Accept the camera access request

After successfully scanning the share QR code, the camera admin will receive a guest user request. Accept the guest user request, then the shared user will be able to see the camera on the homepage and access the camera. The Person icon indicates this is a shared camera. The camera admin can check the shared account on the Share page.

.

.

<p>The post LongPlus Camera User Guide first appeared on NVR IPCAMERA SECURITY.</p>

You can connect your compatible Amazon Echo, Echo Show, Fire TV, or Fire Tablet to your Ring device and use Alexa voice commands to do the following (and more):

*Ring Alarm and all Ring Alarm accessories require a subscription for digital notifications, in-app features, digital arming/disarming, and integration with other Ring, Echo, and third party products. Subscription sold separately. View ring.com/protect-plans for pricing and details.

See which Alexa-enabled devices are compatible with Ring

.

Connect your Ring device to your Alexa-enabled device

First, you’ll need to download the Alexa app on your mobile device or tablet. Get the Alexa app from the Apple App Store (iOS devices), or the Google Play Store (Android devices).

You may also need to update your mobile device’s operating system.

If you already have the Ring app you’ll need to ensure you have the latest version. 

Next, follow these steps to add Ring as a Skill in the Alexa app:

Note: If your Ring devices do not appear after you tap Discover Devices, you can say, “Alexa, discover my devices,” or tap the Devices icon at the bottom right corner of the Alexa app.

Connecting Amazon Alexa-Enabled Devices with Ring Devices

Read More : Ring Alarm Setup Guides and Manuals

Activate chime notifications on your Alexa-enabled device

Once you’ve connected your Ring doorbell to your Alexa-enabled device, you can set up chime notifications to get an alert on your Echo or Fire TV device when someone presses your doorbell.

Follow these steps to get Chime Notifications:

Note: Make sure each Alexa device you enable for Chime Notifications has Communication and Announcements enabled and the Do Not Disturb feature turned off in the Alexa app.

.

Activate Ring Intercom notifications on your Alexa-enabled device

Once you’ve connected your Ring Intercom to your Alexa-enabled device, you can set up Ring Intercom notifications to get an alert on your Echo or Fire TV device when someone buzzes your Ring Intercom.

.

Answer the door or Ring Intercom with Alexa

After you’ve connected your Ring doorbell or Ring Intercom to your Alexa-enabled device, you can answer the door and speak to your visitors through your Echo or Fire TV device.

To speak to your visitor, you can say:

.

Configure unlock by voice for your Ring Intercom

Follow the steps to enable unlock by voice and create a voice code

.

Unlock your building entrance using Alexa with Ring Intercom

To unlock the building door using Alexa, say Alexa, unlock [Ring Intercom Name]. Alexa will then ask you for your voice code to complete the action.

.

.

Get Live View from your Ring camera with Alexa

If you have an Echo Show, Fire TV, or Fire Tablet, you can use Alexa commands to view the live video stream from your Ring doorbell or security camera.

To get a live view from your Ring camera, you can say:

To stop the live video feed, you can say:

Note: “Front Door” is an example and may differ from the location labels that you assigned to your device(s) during setup. Other examples – backyard, side door, garage, etc.

Read Next  :Reolink NVR Setup Guide

Arm and disarm your modes

You can ask your Alexa-enabled device to change the mode to disarmed or armed* for your Ring devices, including cameras and Ring Alarm.

*Ring Alarm and all Ring Alarm accessories require a subscription for digital notifications, in-app features, digital arming/disarming, and integration with other Ring, Echo, and third party products. Subscription sold separately. View ring.com/protect-plans for pricing and details.

Click here to learn how to arm and disarm your Ring devices with Alexa.

To learn more about Ring Modes, click here. 

.

 Control which Alexa devices can access Live View on your Ring devices

Once you’ve connected your Ring device(s) to Alexa, you can change which Alexa devices have access to Live View at any time in the Ring app.

Note
If you enabled the Ring Skill on an Amazon/Alexa account that is not linked to your Ring account, the Alexa devices will not be listed here. If you wish to remove access to your Ring account for those Alexa devices, you can do so from the associated Amazon/Alexa account.

.

Ring and Alexa troubleshooting tips

.

Downloading and Updating the Ring App

Learn how to download the Ring app and update your mobile device’s version of the Ring app. 

Downloading the Ring app for your mobile device

The Ring app is available for phones and tablets in the Apple and Google Play stores.

You can also visit ring.com/app to directly download the Ring app on your mobile phone.

Learn how to create a Ring account

Updating the Ring app on your mobile phone

For the latest features and fixes, make sure to update the Ring app to the latest version. To get started, choose your mobile device’s operating system below:

Troubleshooting your Ring app update

If you’re having trouble getting the latest version of the Ring app, here are a few things to try. 

Make sure your mobile device is on wifi.
If you have poor cellular signal, your mobile device may be pausing your update until it’s on wifi. Try connecting to a wifi network.

Make sure your mobile device has enough storage.
For apps to update, most mobile devices require 3-5 GB (gigabytes) of space. Try backing up your photos and videos to the cloud, or uninstalling apps you don’t use.

Confirm your mobile device is compatible to update.
If you have iOS 13 (or lower) or Android 8 (or lower), your mobile device’s operating system may be unable to use the Ring app. Since the release of these operating system versions, we’ve made significant security updates to help protect your Ring account. 
Learn more about Compatible Mobile Devices

Restart your mobile device.
Sometimes phones and tablets just need to be restarted. After restart, attempt to update the Ring app again in your settings or app store.

Uninstall and reinstall the Ring app. 
If you uninstall the Ring app on your mobile device then reinstall the Ring app from your app store, you will download the latest version. Don’t worry, you won’t lose access to your Ring videos, settings, and Event History.

Note
If your mobile device is operating on iOS 13 (or lower) or Android 8 (or lower), you may not be able to reinstall the Ring app.

Arming, Disarming, and Setting Modes on your Ring Alarm

Arming, Disarming, and Setting Modes on your Ring Alarm

Security modes

These three modes on your Ring Alarm will protect your home in different ways. You can switch between them depending on your needs.¹

Disarmed Mode

In this mode, no sensors in your home will be monitored and no alerts will be sent to the monitoring station. Your Alarm system will still be powered on and functioning.

Use this mode when you’re at home and want the freedom to easily go in and out of your house. Fire and CO sensors (if they are attached to the system) will still be monitored.²

Home Mode

In this mode, only your perimeter sensors (doors and windows) will be monitored. Use this when you’d like to move freely inside your home. You can control which sensors are monitored in Home Mode by setting them in your Ring app:

Away Mode

In this mode, all your sensors are monitored and an alert is issued if any of them are triggered. Use Away Mode to secure your home when you’re leaving it and will be out. You can control which sensors will be monitored in Away Mode by setting them in your Ring app:

¹ Ring Alarm and all Ring Alarm accessories require a subscription for digital notifications, in-app features, digital arming/disarming, and integration with other Ring, Echo, and third party products. Subscription sold separately. View ring.com/protect-plans for pricing and details.

² A compatible Ring Protect subscription is required to enroll in the Ring Alarm professional monitoring service. Professional monitoring service is available only within the U.S. (all 50 states, but not U.S. territories) and in Canada (excluding Quebec). Ring does not own its own professional monitoring center. Smoke and carbon monoxide monitoring is not available for a business or commercially zoned address. See Ring alarm licenses at: ring.com/licenses. Additional permit or false alarm fees may apply depending on your local jurisdiction. Additional charges may apply in areas that require permits or guard response service for alarm verification.

Arming your system

To arm your system using the Ring app¹

To arm your system using the Alarm Keypad

When you’ve changed your mode, your Alarm system begins a countdown. This is an Exit Delay, and it gives you time to leave your home before the system arms itself.

You can set an Exit Delay of 0 to 180 seconds:

¹ Ring Alarm and all Ring Alarm accessories require a subscription for digital notifications, in-app features, digital arming/disarming, and integration with other Ring, Echo, and third party products. Subscription sold separately. View ring.com/protect-plans for pricing and details.

Disarming your system

To disarm your system using the Ring app¹

To disarm your system using the Keypad

When you enter your home, your Alarm system begins a countdown. This is an Entry Delay, and it gives you time to disarm the system before it goes off.

You can set an Entry Delay of 0 to 180 seconds:

¹ Ring Alarm and all Ring Alarm accessories require a subscription for digital notifications, in-app features, digital arming/disarming, and integration with other Ring, Echo, and third party products. Subscription sold separately. View ring.com/protect-plans for pricing and details.

Panic alarm

This feature lets you send a panic alarm to the monitoring station anytime. To turn it on, press and hold the ✓ and X buttons on the Keypad simultaneously for 3 seconds.

The Keypad will then send an instant alarm signal to the hub, the Keypad LED Ring will quickly blink red three times, and the speaker will play the panic alarm sound.

.

<p>The post Ring Devices Amazon Alexa Connecting Guide first appeared on NVR IPCAMERA SECURITY.</p>

The following Swann Security cameras can only be viewed and accessed via the Swann Security app from a mobile device.

They cannot be added to Swann security system recorders, such as DVRs, NVRs, and NVWs. These recorders are compatible with specific system camera models.

Can a SWIFI camera work without Internet?

Internet is required as the SWIFI cameras communicate to the P2P server using the Internet to stream to the Swann Security app and upload recordings to the cloud.

Compatible Routers

Any of the following routers are compatible provided they have a 2.4 GHz frequency:

For more information, see What router WiFi frequency band is my SWIFI camera compatible with: 2.4GHz VS 5GHz Frequency?

Compatible Wi-Fi extender or repeaters

It is possible for the SWIFI camera to pair to the router via WiFi extender if the extender is compatible and setup correctly to the router. Troubleshooting and configuration of your extender’s settings have to be performed by your router manufacturer support team, Internet Service Provider or your IT department. See this article: How to boost your WiFi signal and extend WiFi range.

Tip: Try to pair the camera to the router first to check whether its internal network adapter is working. If it works via router but not extender, then there’s a chance the extender is not compatible.

Swann Wi-Fi camera FAQs

Read More : Swann Security Troubleshooting All Devices

Not Compatible / Not Recommended

We do not recommend SWIFI cameras to be connected to the following devices because they cannot provide the necessary network configuration information to the camera to allow it to join the network automatically unless your network device is configured. Troubleshooting and configuration of your device’s settings have to be performed by your router manufacturer support team, Internet Service Provider or your IT department.

Can I view my SWIFI camera on a TV / computer or record to a DVR / NVR?

The cameras above are hub-free. A hub is a base station or recording/storage device that connects via the Internet to the cameras. In contrast, a hub-free camera operates on Wi-Fi exclusively without requiring any additional hardware to store footage. 

A hub-free (standalone) Wi-Fi camera is only capable of:

These features make a hub-free Wi-Fi camera suitable for users who prefer a wireless setup, easier DIY installation, less hardware, and less footage to check in low-traffic areas of view. 

Accessing live view, recordings, and other settings are covered in the manuals below for your device: 

How do I tell whether my router’s WiFi signal is 2.4GHz or 5GHz for pairing a SWIFI camera?

This is one of the most common reasons why a connection will fail while trying to pair a SWIFI camera to your Swann Security account. If you try to pair a SWIFI camera to the incorrect frequency or SSID name, the error that appears on the app can be one of the following:

Via Mobile Device Settings

One way to tell if the phone is connected to the correct frequency of the router is by checking the name of the SSID (the default name of your router’s WiFi hotspot): 

In the example above, the router has multiple SSIDs. An SSID that has “_2.4GHz,” “24G,” “2.4,” or “24” appended at the end is most likely a 2.4GHz signal. This is the network your phone needs to be connected to before you start pairing a SWIFI camera. 

To avoid connecting to a 5GHz SSID, see How to forget 5GHz connection for pairing a SWIFI camera.

Via Router GUI

If you see two or more Wi-Fi network names that belong to you without 24 or 5, then one may be a 5 GHz band. To identify which name uses 2.4 GHz or 5 GHz, login to your router’s settings. 

For assistance with accessing or navigating your router, contact the manufacturer of your router or your Internet Service Provider if you do not know. Swann Tech Support can only assist in pairing IF your router has a 2.4GHz signal and if you already know the correct WiFi credentials of your router.

How to change the time zone of my SWIFI camera in the Swann Security app?

The error “Device Timezone Out of Sync” appears if your camera’s time zone is different from your phone app’s time zone. 

If your camera is in a different location (with different time zone) than your mobile device, you can ignore hit Cancel. 

If the date and time displayed on the camera’s Live View is incorrect, do the following: 

Repeat each step for each camera device paired to your Swann Security account.

How to create Guest account on a WHD-PTCAM using SwannView Link software?

Installing SwannView Link

Adding the camera

Since the computer is on the same router or modem already, when you open SwannView Link the camera will be auto-detected, but the password will not be entered yet. You will see the error message below. Just click on OK.

How to forget 5GHz connection for pairing a SWIFI camera

Some mobile devices have a tendency to switch between hotspots or SSID automatically. This can disrupt the pairing process when setting up your SWIFI camera to your mobile device. 

To avoid connecting to a 5GHz signal or the wrong hotspot during pairing, forget the 5GHz connection: 

Note: If you see a WiFi name that ends with _ext, it is most likely a WiFi extender.

How to hard reset Floodlight Security Camera (SWIFI-FLOCAM2 / SWWHD-FLOCAM)

Performing a factory or hard reset of the camera will:

How to factory reset via physical button

1.Locate the Reset button (see below figure) on the SWIFI-FLOCAM2 / SWWHD-FLOCAM. It is behind the camera module covered by a rubber flap.

2.Press and hold the Reset button (for 20 seconds).

3.When the blue LED indicator on the camera turns off, release the Reset button.

4.The camera will start the factory reset process which can take up to 2 minutes.

5.Once factory reset is complete, it will be in Pairing mode (LED will be in slow blinking blue).

After you factory reset your device, you’ll have to pair it with your Wi-Fi network again.

How to hard reset SWIFI-2KOCAM / SWIFI-SPOTCAM / SWWHD-OUTCAM

Performing a factory or hard reset of the camera will:

How to factory reset via physical button

1.Locate the Reset button (see below figure) on the twin cable of the SWIFI-2KOCAM / SWIFI-SPOTCAM / SWWHD-OUTCAM.

2.Press and hold the Reset button (for 20 seconds).

3.When the blue LED indicator on the camera turns off, release the Reset button.

4.The camera will start the factory reset process which can take up to 2 minutes.

5.Once factory reset is complete, it will be in Pairing mode (LED will be in slow blinking blue).

After you factory reset your device, you’ll have to pair it with your Wi-Fi network again.

How to hard reset SWIFI-BUDDY

Performing a factory or hard reset of the camera will:

How to factory reset via physical button

1.Ensure the camera has been fully charged for at least 4 hours prior.

2.Locate the SET button and RST pinhole (see below figure) on the back of the camera.

3.Press and hold the SET and RST button (pin required).

4.After 2 seconds, release RST button.

5.Once blue LED turns off (or after 15 seconds), release SET button.

6.Once factory reset is complete, it will be in Pairing mode (LED will be in slow blinking blue) and you will hear it say “Ready for pairing”.

After you factory reset your device, you’ll have to pair it with your Wi-Fi network again.

How to hard reset SWIFI-CORECAM / SWIFI-COREPRO

Performing a factory or hard reset of the camera will:

How to factory reset via physical button

1.Ensure the camera has been fully charged for at least 4 hours prior.

2.Locate the Reset button (see below figure) on the camera.

3.Press and hold the Reset button (for about10 seconds).

4.Once the LED indicator on the camera turns off, release the Reset button.

5.The camera will start the factory reset process which can take up to 2 minutes.

6.Once factory reset is complete, it will be in Pairing mode (LED will be in slow blinking blue).

After you factory reset your device, you’ll have to pair it with your Wi-Fi network again.

How to hard reset SWIFI-PTCAM2 

How to hard reset SWIFI-XTRCAM

How to set SWIFI-MOTION / SWIFI-WDOOR / SWIFI-LEAK / SWIFI-ISIREN to pairing mode

Setting the sensor or siren to pairing mode will:

Note: If the sensor or siren is paired to your account and the Wi-Fi details did not change, it will connect back to the same network once pairing mode times out after 3 minutes.

Why does my WiFi camera stop recording motion after a minute?

Wireless standalone cameras can only record by PIR/motion. Where the camera is mounted can have an impact on how effective movement is picked up and recorded.