Tag: ConfigTool
Dahua Video Intercom GEN3 Setup Guide The One-Key Config feature is only available on a few VTHs. Please check the device list below to see what model [...]
IC Realtime Password Reset This guide will walk you through initializing the recorder properly so the password can be reset by the client without send [...]
How to back up video files on new UI
Description
This article is to show you how to backup video files from new system UI.
Prerequisites
Dahua [...]
DDNS Setup
Description
DDNS stands for Dynamic Domain Name System. The main advantage for DDNS is If you have a dynamic ip address, (where your addr [...]
How to Connect a WiFi Camera to WiFi NVR Advanced
Description
This shows you how to connect a WiFi Camera to WiFi NVR.
Prerequisites
A WiFi Ca [...]
How to set IP address for configuring IP cameras
Description
If a network video recorder is on one IP gateway without a router (or just on a switch) [...]
How to troubleshoot P2P offline status
P2P Troubleshooting Checklist
P2P Enabled (Dahua Device Only)
Interface
Image
WebUI
Syste [...]
The following will introduce how to reset NVR via hardware.
1. Position of Reset Button
Series-1000:
100x/1009-UT: There is a hole on the back, u [...]
Description
This article is to show how to disable audio input function from Dahua Camera in batch through Config Tool Software.
Prerequisites
[...]
Reset Dahua Device Password Using ConfigTool
Description
These instructions will show how to reset the password of a Dahua device using ConfigTool o [...]