1 CMS to change the logo instructions 1.1 package before work 1.1.1 image replace To change the pictures do a good format and size,respectively nam
1 CMS to change the logo instructions
1.1 package before work
1.1.1 image replace
To change the pictures do a good format and size,respectively named“logo. bmp”and“video. bmp”to change the boot logo and the video is missing the logo,for
Replace CMS installation directory under the skin Folder 2 pictures,shown in the following figure:
Note: the reference to the Universal CMS folder under the logo image size, the format must be a bmp
1.1.2 modify the client name
If you want to change the following figure shows the position of the name,to be the first in the CMS installation directory under the language folder to change the corresponding name;
To change what language is displayed under the name, find the corresponding language package, the following simplified Chinese, for example, double-click the“SimChinese. Lang”, and found before the corresponding
The name of the modification, as shown below:
Here instead you want to display the name, and then save for previous“SimChinese. Lang”to replace the previous document, note that this document format. Lang, the
Save when you save to this format.
1.1.3 desktop shortcut modification
This requires the use of a tool, this tool can by consulting R & D Ask.
Click on”file”,select Open,and find the CMS installation directory,find the”CMS.exe”select,Open,as shown below:
Open after the selection,select the icon,then select the 1st folder,as shown below:
Click”actions”,choose to replace the icon,the following pop-up dialog box:
Click on the”new icon file”,in the pop-up to find the range find the need to replace the new icon,as shown below:
The above select the OK icon after click on open,pop up the following dialog box:
Shown above is to select a new icon,click on”Replace”,back before opening the icon interface,the operation is almost complete,just need to save to,click on“file”
Select the“save as”pop up the following dialog box:
The file name is”CMS.exe”,click save,in the save selected directory under the following icon is what we need in the file:
Put on the figure tool to get to the file replaces the CMS installation directory”CMS.exe”then be packaged can be,as shown below:
Note: CMS shortcut changes sometimes caused by installing the modified icon of the program and then uninstall,then install a generic version of the CMS program,icons or modified icons,
In this case to clean up the computer cache,restart computer.
1.2 there is no project file packing method
1.2.1 run the tool factory
1.2.2 create a project
Select Create a new project and select the Show Project Wizard, click OK,enter the Wizard,
This name is also the installation package is the default installation directory name.
1.2.3 set is packaged directory
Click on the next, the emergence of another wizard page
Not in our newest program-related files, you can go to our publishing catalog or web site to download the latest app, and install. Then click on Browse, this
A package file to the directory where the settings for the program installation directory, such as C:\Program Files\CMS.
1.2.4 select package style
Click Next, enter the installation package of the interface setup wizard page
Here you can set the installation process of the interface, in General we select the default. Then click next, set the style
Please choose one favorite style.
1.2.5 select the packaging language
Click Next, select the language
Select the installer supported languages. One of the following is the default display language.
Then the next step without choice. Next, still using the default settings
Click Finish. Packaging tools will need to package the file to load.
These 5 items.
1.2.6 double-click CMS. exe this item
Appear the following interface
Location inside, is set shortcuts to appear, and select the DeskTop and StartMenu>AppFold, on the desktop and Start Menu Programs to display faster
Seagate way. The default name for the shortcut is set before the project name.
If you want to modify the shortcut name can be at the top of the page in the Description set up for the other name. But the installation directory of the name will not change, if you want to
Let the installation directory of the program name changed to other name, then it should be at the beginning of the import file prior to the installation directory of the CMS. exe changed to other name Project Name
Saying and then make the appropriate modifications.
Here’s the ICON option is to select the shortcut icon, the default is our own icon if you select Custom, you can customized app icon.
But this icon in advance is selected package into the program. Here you can choose to have already been loaded into the packager in a ICO etc file format as a program
Shortcut icon, select OK.
1.2.7 set register control
Then double-click, respectively, double-click the mapctrl. ocx, WndManager. ocx and other OCX controls
Select the Advanced check on the OLE/ActiveX in two. Here is the settings after the installation is done in the user’s computer, register the OCX controls. Here special note
Meaning don’t forget! Respectively, set up, go back to the main interface.
1.2.8 entered Before Installing
Double-click the main interface to the left of the Screens here is a detailed set during installation of the interface is displayed in the second term Before Installing, the
After entering the selection of the second item, there is provided a license agreement, currently our app is not, and needs to be deleted, the point Remove ->OK.
1.2.9 enter On Pre Install
Registry. CreateKey(HKEY_LOCAL_MACHINE, “SOFTWARE\\Software\\NETCMS”);
Registry. SetValue(HKEY_LOCAL_MACHINE, “SOFTWARE\\Software\\NETCMS”, “FirstTimeRun”, 0, REG_DWORD);
These commands. Is used to write the registry to determine whether installation of a program, and the program is not the first time running, because our program first run will pop up words
Language selection dialog box, if not, it is not set. Click OK. in.
1.2.10 double-click the build
The above setting is completed, you can package, click the publish in
Will appear in the publish Wizard dialog box. Click Next
The above one is to set the installation package to complete the generated path. The following one is to set the installed package name.
1.3 have the project file packing method
1.3.1 copy directory
If customers have our project file, you can omit the 1 ~ 9 steps. Can be directly packaged, the method is the entire installation directory, copy it down, put to and we
The project file in the same directory, and then inside the picture changes. Then make this folder the default is CMS renamed the General, and then double-click the project file
The premise of the need to install SetupFactory8. 0 enter the main interface, select publish in the Build directly packaged.
1.3.2 modify the shortcut
If the user wants to make a shortcut of the changes, you can refer to Item 6 above settings. If the user wants to change project name, that is, the installation process is displayed in the thread
Sequence name and installation directory of the default folder name. You can select the main interface, the lower the Settings the first item, in the open dialog box productname a
Items to be modified.
1.3.3 set the background image
Our universal CMS default is no“no video background picture”if the customer needs, you can create a bmp format picture size not more than 600k）
Named for the video. bmp was added to the project can be. Here also for the following settings:
Just added to the skin folder in the video. bmp was added to the project. Click add.
Then in the main interface, double-click the video. bmp occurs the attribute settings dialog box, the Destination item is set to on The shown path.
Here the Local one, it is best to set a relative directory. For example, the project file and will be packaged folder in the same directory. Here
D:\SVN\GENERAL_SNS_20091221\CMS打包\General\20121115_Decoder\General\Skin should be set to.\ General\Skin
If not we provide the project file, or is later increased the file. The best of these file properties of the Local option is set to relative to the directory form.
So the same one project file to another computer, as long as the need to package the folder in the same directory, it can be packaged. But to play this
Some settings need to save the project and re-open before they take effect. May is a program of bugs
1.3.4 picture of modifications
If the customer needs to interface style changes. If the buttons or other controls the position has not changed, then you can directly modify our picture of the same size,
Elements. Control relative position unchanged, and then in the re-packaging can be it.. If you need to change button position. You’ll need the corresponding configuration file is modified
255,255,255 is a color RGB value