Our products and solutions have been deployed and used daily in more than 100 countries and regions, meeting customer needs in various vertical markets that range from residential to commercial, from healthcare to public safety.

Reset Device Web Password on Akuvox Cloud Platform

Users may forget passwords for logging into device web interface. Follow the steps to reset the web password when the device is connected to Akuvox Cloud.

Step 1

Log into the Akuvox Cloud platform with an installer account.

Step 2

To go to the device Info page, follow the steps.

On the Single-tenant Manager view

1. Click User on the left column.

2. Click the Device icon of the desired user.

3. Click the Info icon of the desired device.

On the Project Manager view

1. Select Community or Office on the left upper corner.

2. Click the Info icon of the desired community or office.

3. Click Intercom Devices and then the Info icon of the desired device.

Step 3

1. On the device Info page, click the Settings button.

2. On the Settings page,

Note

Factory Reset Akuvox Devices v2

Reset Door Phones through Physical Buttons

Note

Power up the devices before resetting them through the physical buttons.

S539, S532, X916 and X912

Hold the reset button with a pin and the device will be reset.

X915, E12 and DB01

Insert a PIN into the hole and hold it to reset the device.

E16, E18, E20 and E21

Remove the back cover of the door phone and hold the reset button to reset the device.

R27, R28, R29 and R20 Series

R27, R28, R29, and R20 series do not support resetting by pressing physical buttons.

Watch the video for other reset methods.

Reset Intercom 2-wire Kit Accounts for Single Tenants

Through resetting, the tenant information will be deleted while the device information will be retained after a tenant moves out. This saves time from repeatedly entering the device information.

Installers

1.Log into the SmartPlus Cloud platform with an installer account.

2.Click Role in the upper right corner to switch between single-tenant and community projects.

3.Click to reset the target user account.

After resetting, the following data will be reset:

The following data will be kept:

The following data will be removed:

Distributors

Distributors can reset the Kit users when the Kit is added directly to the single-tenant projects under the distributor account.

3.Click  to reset the target user account.

After resetting, the following data will be reset:

The following data will be kept:

The following data will be removed:

End Users

End users can delete the family master account on the indoor monitor.

After resetting, a new QR code will be issued to the indoor monitor from the SmartPlus Cloud.

On the SmartPlus Account screen, tenants can scan the QR code to register SmartPlus accounts themselves.

.

How to Configure and Modify the Password

The initial password “admin” is rather weak, easy to crack, thus we provide for you the password change service.

Before Start

The difference between the user mode and admin mode on the web page

How to configure

Website password modification

admin mode
Go to Security >Basic >Web Password Modify, choose user name as “admin”, click Change Password, then enter the old password “admin”, input the new password.

user mode
Go to Security >Basic >Web Password Modify, click Change Password, then enter the old password “user”, input the new password.

Device password modification

System code
System code is used to enter “More Interface”, to adjust the password: More>Settings>More, input the default system code “123456”, tap System Code, input the original system code and new system code.

Setting code
Setting code is used to enter “Settings”, and it is left blank by default. To adjust the password: More>Settings>More, input the default system code “123456”, tap Settings Code, leave the original settings code blank, input the new one.

Steps to Enter Device Web Interface

.

Factory Reset Akuvox Devices

Reset Device Web Password on Akuvox Cloud Platform

Users may forget passwords for logging into device web interface. Follow the steps to reset the web password when the device is connected to Akuvox Cloud.

Step 1

Log into the Akuvox Cloud platform with an installer account.

Step 2

To go to the device Info page, follow the steps.

On the Single-tenant Manager view

1. Click User on the left column.

2. Click the Device icon of the desired user.

3. Click the Info icon of the desired device.

On the Project Manager view

1. Select Community or Office on the left upper corner.

2. Click the Info icon of the desired community or office.

3. Click Intercom Devices and then the Info icon of the desired device.

Step 3

1. On the device Info page, click the Settings button.

2. On the Settings page,

Note

.

Check IP Address of Akuvox Door Phones

IP address(es) can be obtained on Akuvox door phones. With the IP address, you can log into the device web interface for configuration, troubleshooting, and more.

Devices with Numerical Keys or Touch Screens

Check the IP address on the system information screen.

Devices without Numerical Keys or Touch Screens

Check IP address through automatic IP announcement.

Note

You can also obtain the device’s IP address using the Akuvox IP scanner.

Download IP scanner:
https://knowledge.akuvox.com/docs/akuvox-ip-scanner?highlight=IP

Check IP Address of Akuvox Indoor Monitors

IP address(es) can be obtained on Akuvox indoor monitors. With the IP address, you can log into the device web interface for configuration, troubleshooting, and more.

The routes may vary by model.

In this part, C313 is taken as an example.

Exception

To check the IP address of S560, press the # key for about 5 seconds and the device will automatically broadcast its IP address.

Check IP Address of Access Control Terminals

Obtain IP Address via IP Scanner

IP scanner allows you to search the device IP address(es) and to perform targeted device reboot, reset, network setting, etc.

Note

Installation

1. Decompress the rar. file downloaded.
2. Double-click on the setup.exe file.

3. Go through the installation process.

a. Click Next to start the installation.

b. Check to accept the terms of the license agreement, and click Next.

c. Enter User Name and Company Name, and click Next.

d. Click Finish to install the IP scanner successfully. The software icon will appear on the desktop.

Obtain IP Address

Note

To obtain the device IP address, your personal computer should be in the same LAN as the device.

Additional Features

Apart from checking IP address(es), you can export device information and perform targeted device network settings and web interface access, reboot, and reset.

Note

Before applying the following changes, enter the User Name and Password. The default is admin.

Log into Device Web Interface

Enter the device IP address in a browser, and you can log into the device web interface for configuration, troubleshooting, and more.

.

<p>The post Factory Reset Akuvox Devices v2 first appeared on NVR IPCAMERA SECURITY.</p>

Disable audio recording on Dahua Recorder

Description

This article is to show how to disable audio function in Dahua IP camera that connected to Dahua NVR.

Video Instruction

Step by Step Instruction

1. Login to Dahua recorder from local system interface.

2. Under Settings, click on Camera.

3. Go to Encode.

4. Select the camera channel.

5. Click on More.

6. Click on the toggle to turn off Audio. Click OK.

7. Click Save.

Dahua NVR Troubleshoot All Series

Read Also : Tuya Camera User Guide Ultimate Manual

Disable audio on Dahua IPC that connected to Dahua NVR

This article is to show how to disable audio function in Dahua IP camera that connected to Dahua NVR.

Video Instruction

Step by Step Instruction

Step by Step Instructions

1. Login to Dahua NVR Web GUI using Internet Explorer.

2. Click on Settings > Camera.

3. Click on Camera list (Some recorder will label it as Registration)

4. Find the camera channel you want audio to be disable, click on E Internet Explorer icon.

5. It will take you to the login page of Dahua IP Camera. Login with Camera credential.

6. Go to Settings > Camera > Audio. By default the Audio settings is enabled.

7. Click on the checkmark to uncheck on both main and substream.

8. Click Save.

.

No Audio from Live Feed

There are following possibilities:

1. Make sure your audio on the computer or television is enabled and working by playing music or watching a video with audio online. You should see this audio meter change when playing music or video on the computer/television.

2. Once you have confirmed your audio is working on your speaker, and if you still can’t hear from your Live Feed, check your connections. If you are using an external microphone that plugs into the camera, please make sure you are supplying power to since the camera does not. See picture below:

.

3. If your connections and power are in order but you still cannot get audio from your live feed, log into your IP Camera or NVR and change the following settings.

4. If you are accessing your audio feed from a computer also make sure you have the speaker symbol enabled to enable audio from the Live Feed.

.

There is Audio from Live Feed, No Audio During Playback

There are following possibilities:

1. Make Sure your camera with a microphone is working via live stream, please follow the NoAudio guide for details.

2. After ensuring you are receiving an audio feed, log onto your NVR and make sure your encoding setup is correct (Setup>Image>Encode>) and make sure your are on the right channel where the camera has a working microphone. Now make sure audio is enabled for either or both the Main Stream and Sub Stream (whichever you are recording on)

3. Also make sure your camera is scheduled to record during specified operation.

4. Also make sure your camera is set to record

5. Now playback a recording of a camera that had picked up audio, you can also simulate this by making noise by the microphone and playing that segment back. Also make sure that the Volume button is not on mute and is turned all the way up during playback.

There is no HDMI output.

Video Loss 1 Camera

There are following possibilities:

Video Loss on Multiple Cameras

There are following possibilities:

Camera Feed is Blurry or Distorted

There are following possibilities:

Video is distorted when searching local records.

There are following possibilities:

Explanation:

1. If Video quality setup is too low then reconfigure video quality setup.

2. If Program read error, bit data is too small. There is mosaic in the full screen. Please restart the DVR to solve this problem.

3. If HDD data ribbon error then replace ribbon.

4. If HDD malfunction then replace HDD.

5. If DVR hardware malfunctions then replace hardware.

Remote control does not work.

There are following possibilities:

Explanation:

1. If Remote control address is not correct then find the correct address.

2. If Distance is too far or control angle is too small then shorten the distance or fix control angle.

3. If Remote control battery power is low then replace battery power.

4. If Remote control is damaged or DVR front panel is damaged then replace remote control or DVR front panel.

System does not boot

There are following possibilities:

NVR Randomly Rebooting or Shutting Down

Issue: NVR Randomly Rebooting or Shutting Down

There are following possibilities: Explanation:

1. If Input voltage is not stable or it is too low, then change the power supply and cable.

2. If HDD malfunction or something wrong with the ribbon, then replace the HDD or the ribbon.

3. Button power is not enough, then add more button power.

4. If Front video signal is not stable then check and adjust front video signal.

5. If Working environment is too harsh, too much dust then clean it.

6. If Hardware malfunction then replace hardware.

How to set the date and time

Time display is not correct.

There are following possibilities: Explanation:

Step by Step Instructions

1. Make sure the “Time Zone” is set correctly.

GMT stands for Greenwich Mean Time.

2. Setup DST, if applicable.

3. “Sync PC” if all else fails.

4. Click, “OK” to save your changes.

Burn error /USB back error.

Explanation:

1. If Burner and NVR are in the same data cable, then separate them.

2. If System uses too much CPU resources. Then please stop record first and then begin backup.

3. If Data amount exceeds backup device capacity which may result in burner error. Then please delete data.

4. If Backup device is not compatible, please change backup device.

5. If Backup device is damaged, please change backup device.

<p>The post Dahua NVR Troubleshoot All Series first appeared on NVR IPCAMERA SECURITY.</p>

DAHUA NVR Interface Setting Network

.....

TCP/IP

The single network adapter interface is shown as in Figure 4‑99 and the dual network adapters interface is shown as in Figure 4‑100.

DAHUA NVR Network Interface Setting

Read More : DAHUA IP Camera 5.0 UI Setup

Note: The dual-Ethernet port series support the above three configurations and supports functions as multiple-access, fault-tolerance and load balancing.

The following MTU value is for reference only.

After completing all the setups please click save button, system goes back to the previous menu.

Connection

The connection setup interface is shown below:

Important: System needs to reboot after you changed and saved any setup of the above four ports. Please make sure the port values here do not conflict.

WIFI

Note: This function is for some series product only.

The WIFI interface is shown as below. 

Please note:

After device successfully connected to the WIFI, you can view the hotspot name, IP address, subnet mask, default gateway and etc. Right now system support TOTOLINK_N2200UP module.

3G

3G setup interface is shown as below. 

Please refer to the following contents for the parameter information.

It is to display current wireless network signal intensity such as EVDO, CDMA1x, WCDMA, WCDMA, EDGE and etc.

PPPoE

PPPoE interface is shown in the above image. Input “PPPoE name” and “PPPoE password” you get from your ISP (Internet service provider). Click save button, you need to restart to activate your configuration. After rebooting, NVR will connect to internet automatically. The IP in the PPPoE is the NVR dynamic value. You can access this IP to visit the unit.

DDNS

DDNS setup interface is shown below.

You need a PC of fixed IP in the internet and there is the DDNS software running in this PC. In other words, this PC is a DNS (domain name server).

In network DDNS, please select DDNS type and highlight enable item. Then input your PPPoE name you get from you IPS and server IP (PC with DDNS). Click save button and then reboot system.

Click save button, system prompts for rebooting to get all setup activated. 

After rebooting, open IE and input as below: http：//(DDNS server IP)/(virtual directory name)/webtest.htm e.g.: http：//10.6.2.85/NVR _DDNS/webtest.htm.) 

Now you can open DDNSServer web search page.

Please note DDNS type includes: CN99 DDNS, NO-IP DDNS, Quick DDNS, Dyndns DDNS and sysdns DDNS. All the DDNS can be valid at the same time, you can select as you requirement.

Private DDNS function shall work with special DDNS server and special Professional Surveillance Software (PSS).

Quick DDNS and Client-end Introduction

1) Background Introduction

Device IP is not fixed if you use ADSL to login the network. The DDNS function allows you to access the NVR via the registered domain name. Besides the general DDNS ,the Quick DDNS works with the device from the manufacturer so that it can add the extension function.

2) Function Introduction

The quick DDNS client has the same function as other DDNS client end. It realizes the bonding of the domain name and the IP address. Right now, current DDNS server is for our own devices only. You need to refresh the bonding relationship of the domain and the IP regularly. There is no user name, password or the ID registration on the server. At the same time, each device has a default domain name (Generated by MAC address) for your option. You can also use customized valid domain name (has not registered.).

3) Operation

Before you use Quick DDNS, you need to enable this service and set proper server address, port value and domain name.

Except default domain name registration, you can also use customized domain name (You can input your self-defined domain name.)  After successful registration, you can use domain name to login installed of the device IP.

Important

UPnP

The UPNP protocol is to establish a mapping relationship between the LAN and the WAN. Please input the router IP address in the LAN.

Double click one item; you can change the corresponding mapping information.

Important:

When you are setting the router external port, please use 1024~5000 port. Do not use well-known port 1~255 and the system port 256~1023 to avoid conflict.

For the TCP and UDP, please make sure the internal port and external port are the same to guarantee the proper data transmission.

IP Filter

You can add IP in the following list. The list supports max 64 IP addresses. System supports valid address of IPv4 and IPv6.

Please note system needs to check the validity of all IPv6 addresses and implement optimization.

After you enabled trusted sites function, only the IP listed below can access current NVR.

If you enable blocked sites function, the following listed IP addresses can not access current NVR.

Note:

EMail

The email interface is shown as above.

Please note system will not send out the email immediately when the alarm occurs. When the alarm, motion detection or the abnormity event activates the email, system sends out the email according to the interval you specified here. This function is very useful when there are too many emails activated by the abnormity events, which may result in heavy load for the email server.

FTP

You need to download or buy FTP service tool (such as Ser-U FTP SERVER) to establish FTP service. Please install Ser-U FTP SERVER first. From “start” -> “program” -> Serv-U FTP Server -> Serv-U Administator. Now you can set user password and FTP folder. Please note you need to grant write right to FTP upload user.

You can use a PC or FTP login tool to test setup is right or not. For example, you can login user ZHY to H140H140H140HTUFTP://10.10.7.7UTH and then test it can modify or delete folder or not.

System also supports upload multiple NVRs to one FTP server. You can create multiple folders under this FTP.

Please highlight the icon in front of Enable to activate FTP function. Here you can input FTP server address, port and remote directory. When remote directory is null, system automatically create folders according to the IP, time and channel. User name and password is the account information for you to login the FTP.

File length is upload file length. When setup is larger than the actual file length, system will upload the whole file. When setup here is smaller than the actual file length, system only uploads the set length and auto ignore the left section. When interval value is 0, system uploads all corresponding files. After completed channel and weekday setup, you can set two periods for one each channel. Click the Test button, you can see the corresponding dialogue box to see the FTP connection is OK or not.

Multicast

Here you can set a multiple cast group. Please refer to the following sheet for detailed information.

-224.0.0.0-239.255.255.255

-“D” address space

-224.0.0.0-224.0.0.255

-TTL=1 When sending out telegraph

-For example

224.0.0.13 PIMv2 router

-239.0.0.0-239.255.255.255

-Private address space

Except the above mentioned addresses of special meaning, you can use other addresses. For example:

Multiple cast IP: 235.8.8.36

Multiple cast PORT: 3666.

After you logged in the Web, the Web can automatically get multiple cast address and add it to the multiple cast groups. You can enable real-time monitor function to view the view.

Please note multiple cast function applies to special series only.

Alarm Center

This interface is reserved for you to develop.

Auto Register

This function allows the device to auto register to the proxy you specified. In this way, you can use the client-end to access the NVR and etc via the proxy. Here the proxy has a switch function. In the network service, device supports the server address of IPv4 or domain.

Please follow the steps listed below to use this function.

Please set proxy server address, port, and sub-device name at the device-end. Please enable the auto register function, the device can auto register to the proxy server.

Important

Do not input network default port such as TCP port number.

1) The proxy server software developed from the SDK. Please open the software and input the global setup. Please make sure the auto connection port here is the same as the port you set in the previous step.

2) Now you can add device. Please do not input default port number such as the TCP port in the mapping port number. The device ID here shall be the same with the ID you input previously. Click Add button to complete the setup.

3) Now you can boot up the proxy server. When you see the network status is Y, it means your registration is OK. You can view the proxy server when the device is online.

Important

The server IP address can also be domain. But you need to register a domain name before you run proxy device server.

P2P Setting

The P2P interface is shown in the above image. You can visit www.easy4ip.com to scan the QR code to login.

Easy Space

This function allows you to upload motion detec record or snapshot image to the dropbox and etc.

The easy space interface is shown above. 

Please select the easy space address from the dropdown list and then input corresponding user name and password.

Note

Switch

The built-in switch function is for product of PoE port.

It is for you to set IP address, subnet mask, gateway and etc of the Switch.

From Main menu->Setting->Network->Switch, you can set switch IP address, subnet mask, gateway and etc.

.

<p>The post DAHUA NVR Network Interface Setting first appeared on NVR IPCAMERA SECURITY.</p>

AlfredCamera Setup Guide

What is AlfredCamera?

Our features have been developed for one reason—to help bring you peace of mind. “Simple security at your fingertips” is what we strive for. 

With over 15 million users worldwide, AlfredCamera is the world’s most popular home security camera. We all have someone and something we deeply care about. Whether it’s to keep your babies, pets, or other family members safe or keep an eye on your home, Alfred is here to help you. We believe that everyone deserves the peace of mind, so we made home security easy and free for everyone. 

AlfredCamera can run on different platforms and devices, such as Android and iOS, computers, or AlfredCam (Alfred’s own hardware camera). All you need to do is register an Alfred account, and you will be able to start using them as your security cameras. Once your camera device is all set, you can watch live sessions, Event videos, or Continuous Recording Footage at any time and anywhere. 

With our Motion Detection technology, you can detect any motions you might want to know, whether an alarming intruder at your door or simply your excited pet running through the house. In addition, you can also turn on the Continuous Recording to never miss anything. If you would like to check  Moments and Events videos, you can find all the videos triggered by the motions when you were gone. If you would like to check what happened in the past 8 hours, including all the Events, you can playback the Continuous Recording footage. 

.

.

How do I set up AlfredCamera?

Our mission is to make home security simple and accessible to everyone. AlfredCamera helps to turn your device or computer into a security camera, and you only need at least two of them to set up your security systems. You may find our app on Google Play Store or App Store, or you can also use Alfred’s Web on your computer, or even use AlfredCam (Alfred’s own hardware camera) to set as your security camera. 

To know how to set up your AlfredCam, please see here. To set up AlfredCamera on your own devices, please scroll down for a step-by-step guide: 

Step 1 – Prepare 2 devices (mobile or tablet)

Requirements: 

You will use the 2 devices as a

Step 2 – Download Alfred app 

Download Alfred app on your 2 devices from

Step 3 – Log In to the Alfred App

There are three methods to log in to the Alfred app: Google/Email/Apple. If you choose to log in with your email, please enter your email address, then check your inbox to receive a verification email. Afterward, click the link inside the email to verify your account.

Step 4 – Connect two devices

There are 2 options to connect your devices:

Option A : Log in to the same account on two devices

Option B : Connect two devices via scanning the QR code

https://youtu.be/wEh6S9wcX6A

• Log in with your account 

• Tap the Camera Tab

• Tap  Add a Camera  to generate a QR code

• Tap  Scan to Link to Viewer Device to open an in-app scanner

• Scan the QR code on the first device

⚠️ Note: If you are unable to scan the QR code successfully, please check the following:

Step 5 – You’re all set

Now you can start watching live and recording videos now!

.  

⚠️ Note: Refrain from pressing the power button or home button on your Camera devices may cause your camera to go offline. 

Is AlfredCamera free?

AlfredCamera is available for free in the App Store and Google Play Store. As Alfred believes that everyone deserves a peace of mind, we offer many features for free to all users. You may use Alfred’s service on your mobile devices (Android and iOS) and computers, or our AlfredCam with free setup charge and subscription. 

If you’d like to access advanced features that offer more security, please subscribe to the monthly or yearly Alfred Premium plan. To help you know more details about Alfred Premium, this table will help you determine which of these meets your needs. 

Features and Subscription Plans

* = Only available on Android devices
** = Currently not supported on WebViewer

 👉🏼 To subscribe to Alfred Premium, simply tap the top of the home screen.

⚠️ Note:
A. Local currencies/taxes may apply, you may check and confirm the total cost before confirming your payment. 
.

B. AlfredCamera only offers free software service with limited free features. You may use your own spare devices and computers, or purchase AlfredCam via the in-app purchase. 

What devices and systems does AlfredCamera support?

AlfredCamera works on Android devices, iOS devices, computers, and AlfredCam (AC101) (Alfred’s own hardware camera).

To make home security accessible to everyone, we try to make AlfredCamera available on as many smartphone/tablet devices and operating systems as possible. You can connect devices running across Android and iOS systems, use Alfred’s WebCamera / WebViewer, or AlfredCam.

As a rule of thumb, if you can find the AlfredCamera app on the Google Play Store or App Store on your device, it most likely means that the Alfred app can run on your device. However, we do not support any IP cameras or security systems on the market, but you may use AlfredCam, Alfred’s hardware camera. 

What are the recommended OS requirements for my device?

What if I don’t have two devices that run above iOS 11 or Android 5.0?

If you do not have at least two smartphone or tablet devices that run above iOS 11 or Android 5.0, you can use one of the alternatives given below:

What are some of the requirements to use AlfredCamera?

Alfred is all about seamlessly turning old and retired smartphones or tablets into home security cameras. AlfredCamera can run on different platforms and devices, such as Android and iOS, computers, and AlfredCam. 

As we stated that AlfredCamera allows you to build a “Simple Security at Your Fingertips”, it only requests certain minimum storage and internet requirements to set up. In this article, you will learn more about: 

Storage Requirements

Motion Detection

While Alfred keeps your Events and Moments in the Cloud, we still need some local storage to generate snapshots and perform other basic actions on your device.

Continuous Recording

The Continuous Recording footage is saved on your Camera device instead of in the Cloud. Free users and Premium users have different storage requirements: 

Alfredcam (AC101)

AlfredCam is Alfred’s own hardware camera, which requires an SD card inserted if you want to enable Continuous Recording. On the other hand, there are no other storage requirements if you only use the AlfredCam for Motion Detection. Event (motions triggered) and Moment (manually recorded/saved) videos are stored on Alfred’s Clouds for 7 days or 14 days depending on your subscription status. 

Internet Requirements

1. Not only your Camera and Viewer devices, but AlfredCam also needs internet connections to function

Most of our users connect their Camera devices or AlfredCam to their WiFi at home and use their Viewer devices on mobile or office networks. However, the WiFi signal has a higher chance of being unevenly distributed or inconsistent, so we recommend checking Connection Report or WiFi Signal Strength (for AlfredCam) to see if your WiFi signal needs to be improved. You can also use the WiFi Analyzer app to help find an area with the strongest signal to place your Camera device or AlfredCam.

Additionally, you can try the following suggestions to improve your network stability (this does not apply to the AlfredCam): 

2.  How much data does Alfred use?

Data consumption may vary depending on lighting conditions, movement frequencies, and more. While it’s hard to be specific about Alfred’s data consumption, here are some guidelines that might help you:
.

If you want to get a more accurate idea of how much data your Alfred needs, we recommend that you test Alfred out for a day or two. 

3. Does Alfred work when I’m abroad?

As long as all devices are connected to the internet, Alfred works regardless of the distance between the devices. Make sure your Camera devices have a stable connection and that your Viewer devices are connected to a WiFi network or can access international roaming.

When you’re away from home, don’t forget to keep your Camera devices plugged in.

⚠️ Note: Since Alfred relies heavily on Google’s technology, if the country you’re in doesn’t support Google, Alfred will not be able to function properly.

What permissions does Alfred need? How do I turn them on?

To ensure it runs smoothly, there are a few permissions to grant Alfred. Below are the permissions Alfred needs and why:

👇🏼 Please follow the instructions below to grant Alfred permissions: 

Grant microphone permission

📱 Android devices

1.Go to Settings on your Camera device

2.Tap “Apps“

3.Tap “AlfredCamera“

4.Tap “Permissions“

5.Tap “Microphone“

6.Choose “Allow only while using the app“

7.For Android 11+ devices, disable “Remove permissions and free up space” under the Unused apps

📱 iOS devices

1.Go to Settings on your Camera device

2.Swipe down to find the Alfred Camera app

3.Switch on the Microphone toggle

Grant camera permission  

📱 Android devices

1.Go to Settings on your Camera device

2.Tap “Apps“

3.Tap “AlfredCamera“

4.Tap “Permissions“

5.Tap “Camera“

6.Choose “Allow only while using the app“

📱 iOS devices

1.Go to Settings on your Camera device

2.Swipe down to find the Alfred Camera app

3.Switch on the Camera toggle

Grant Media and Photo permission 

📱Android devices

1.Go to Settings on your Camera device

2.Tap “Apps“

3.Tap “AlfredCamera“

4.Tap “Permissions“

5.Tap “Files and Media“

6.Choose “Allow access to media only“

📱iOS devices

1.Go to Settings on your Camera device

2.Swipe down to find the Alfred Camera app

3.Tap “Photos“

4.Choose “All Photos“

Grant permission to display over other apps (Android 10+ only)

1.Open “Settings” on your Camera phone

2.Tap “Apps“

3.Tap “AlfredCamera“

4.Tap “Display over other apps“

5.Switch on the “Allow display over other apps” toggle

How do I set up AlfredCam?

Our mission is to make home security simple and accessible to everyone. With AlfredCam, you only need one Viewer device to set up your security systems. You may download our app on Google Play Store or App Store on your Viewer device, and pair it up with AlfredCam (Alfred’s own hardware camera).

To set up your AlfredCam, please scroll down for a step-by-step guide: 

Download the AlfredCamera app on your Viewer device

Please download the AlfredCamera app on your Viewer device from one of the below platforms (see more information on the device and systems requirements here): 

Create or Log in to your account

If this is your first time using the AlfredCamera app, you will be asked to set up an account. You may sign up with your Google account, Apple ID, or email address to create a new Alfred account. You can see more information on how to set up your Alfred account here.

.

Connect AlfredCam with your Viewer device

1.Make sure your AlfredCam is plugged into a power source, you should see the Status LED on your AlfredCam is in solid RED 🔴.

2.On your Viewer device, tap “Add a Camera” and select “AlfredCam“
   

3.AFTER the Status LED turns slowly blinking GREEN 🟢, tap “I see the green light blinking“
⚠️ Note: If you do not see the green light blinking, please tap “Not seeing the green light blinking?” and reset your camera with the paper clip by pushing the reset button in for 5 seconds. When you hear a beep from your AlfredCam, please tap “I heard a beep“. Then follow the instructions to retry again.

4.Select your 2.4GHz WiFi network > tap “OK” > enter your network password > tap “Next“
   ⚠️ Note: The Alfred app will only ask for location access during the pair-up process by searching for the WiFi nearby to help pair up devices. If you have privacy concerns, you may choose “Allow once”, and the location access will be automatically de-authorized after the pair-up process is complete.

5.Scan the QR code
A. Hold your camera up to your phone screen with the QR code displaying, and keep 6-12 inches of distance in between.
B. AFTER you hear “QR code scanned“, tap “I heard QR code scanned“. Then wait for a few seconds to complete the setup.⚠️ Note: To avoid glare causing unsuccessful scanning, please remove the transparent sticker on the AlfredCam and adjust the screen brightness.  

6.Once the Status LED turns solid Green 🟢, you’re all set! When prompted on the next screen, follow the instructions to turn on Motion Detection.

What type of SD cards are compatible with AlfredCam?

Choosing the right SD card for your AlfredCam is crucial to ensure reliable and efficient storage of video footage. With so many options on the market, it can be difficult to determine which ones are compatible with your device.

The following table provides a list of recommended SD cards that have been extensively tested and found to be the most compatible and reliable options for your AlfredCam.

⚠️ Note: Storage support ranges from 4GB to 256GB in FAT-32 format. Proper formatting is crucial for optimal performance, so it is recommended to ensure the SD card is correctly formatted before use

How to reboot or factory reset AlfredCam?

Reboot AlfredCam 

Reboot Remotely 

1.Tap the Camera’s settings wheel 

2.Scroll down and tap “Reboot Camera”

3.Confirm by tapping “Reboot”

4.Your camera will be temporarily disabled/offline and then reboot itself once the update is complete. It may take a few minutes to complete the process. 

⚠️ Note: While your AlfredCam is being rebooted, the app will automatically take you back to the camera list. Your AlfredCam will be offline for a few minutes  (you may see error code 7007) before it comes back online by itself.

Reboot Manually 

If you are not able to reboot remotely, you can manually unplug and plug it back in again to reboot your AlfredCam. 

Please make sure to check your LED indicator light before unplugging your AlfredCam. When the LED indicator light is flashing green, it indicates that it is in the middle of updating its firmware. Unplugging during the firmware update or video recording may cause fatal damage to hardware or even fail to save videos. 

Factory Reset AlfredCam 

Resetting your AlfredCam device may be necessary to troubleshoot any issues that you encounter while using it. This could include situations such as changing your current Wi-Fi name or password, moving your AlfredCam to a different location with a different Wi-Fi network, or other situations that require a network reset. 

⚠️Note: 

Night Vision (AlfredCam)

Night Vision can be switched Automatic, On, or Off

Automatic          On                   Off

          .         

AlfredCam’s Night Vision functions based on six 850nm infrared LED lights on each camera to show you a clear black and white image even in a dark environment. It allows you to see objects up to 16ft (5m) to 22ft (7m) away, depending on the size of the objects and the light source around them. When Night Vision is set to Automatic, it will detect the light source around the environment and automatically switch to black-and-white vision when there’s insufficient light. 

Night Vision: Automatic (Recommended)

When Night Vision is set to automatic, it detects the light source around the camera and will either show the natural color or switch to a black-and-white vision when there is insufficient light. If your AlfredCam is in an environment that does not get consistent light, it is recommended to set Night Vision to Automatic. To turn on this mode, please follow the steps below: 

⚠️Night Vision will be set to Automatic by default for new users. 

Method 1. 

1.Enter your AlfredCam live session 

2.Find and tap the Moon icon TWICE (shows a letter “A” in the top right corner when it’s set to Automatic)

Method 2. 

1.Tap the Camera’s settings wheel

2.Turn on the Auto Night Vision toggle

Night Vision: On

Turning Night Vision on means the video image will stay black and white at all times, whether it’s daytime or nighttime. If your AlfredCam is in a dark or low-light environment, it is recommended to turn on the Night Vision to ensure that you can always see clear images. To turn on this mode, please follow the steps below: 

1.Enter your AlfredCam live session

2.Find and tap the Moon icon at the bottom menu (icon turns white when it’s on)

Night Vision: Off

When Night Vision is set to Off, the image will stay in natural color during daytime and nighttime. This means that when the light source in the camera’s view is insufficient, the image could be unclear or too dark for you to see. It is only recommended to set Night Vision to Off when there is a constant light source in the viewable area.

If you would like to turn Night Vision off, please follow the steps below:

What if I’m having trouble pairing my AlfredCam?

Navigating through the pairing process of AlfredCam can sometimes pose challenges. If you’re having trouble pairing the AlfredCam, you may refer to the LED status light as an indicator of your current situation.

The following paragraph will help you find more information and further pair up your AlfredCam:

If the Status LED is slowly blinking Green 🟢, but you’re unable to scan the QR code successfully, please check the suggestions below:

⚠️ AlfredCam only works with 2.4GHz Wi-Fi, please make sure you choose a 2.4GHz Wi-Fi while pairing.

If you hear the following voice command and you see the Status LED fast blinking RED 🔴 and GREEN 🟢, please reset your camera with a paper clip or a pen, pushing the reset button for 5 seconds until you hear a beep, then follow the troubleshooting tips to pair the AlfredCam again.

⚠️Note: The error code and voice command only apply to Firmware version 1.5.0 and above, if your AlfredCam operates in a version lower than 1.5.0 and you’re having trouble, please contact us via the in-app channel.

How do I set up Alfred’s WebViewer?

In this article, you can find out steps to set up WebViewer:

Which browsers are compatible with WebViewer?

Alfred’s WebViewer currently supports the latest versions of Chrome, Safari, and Microsoft Edge. Please make sure you have the most recent browser updates for the best user experience.

How to set up Alfred’s WebViewer 

To set up the WebViewer, please follow these steps:

1.Ensure that you have set up your phone/tablet as a camera before using the WebViewer

2.Open the Chrome or Safari browser and enter the URL for the WebViewer:
Alfred WebViewer | PC as Home Security Monitor

3.Make sure you use the same account in the WebViewer as you do on your phone/tablet

4.Once logged in successfully, you will be ready to use the WebViewer to view the camera

 

Enable Notifications

Are you looking to receive notifications for events while using WebViewer, just like how Alfred works on your phone? Now you can follow these simple steps to enable notifications:

1.Click on the bell icon and enable the toggle to turn on notifications

2.Select Allow to grant the necessary permissions

Quick Control

Once you have turned on and allowed notifications, you will see a doorbell icon in the status bar like this:

You can use it to control whether you want to get notified or not. This is how the icon looks when notifications are disabled:

Not getting any notification?

It is possible that you clicked on “Block” when the browser prompted. Depending on the browser you use, this is how to unlock:

• Chrome
Please find the lock icon next to the URL, and enable “Notifications” toggle

Record video

1. Click on the film icon to start recording. You will see a timer popping up. 

.

2. Click on the film icon again when you are done. 

 
.

3. Find the recording in the Moment section

We are in the process of adding more features to the WebViewer. Please continue to support Alfred and stay tuned!

If you have problems with WebViewer, please try the troubleshooting steps here to see if the issue could be solved. 

How do I set up Alfred’s WebCamera?

Our mission is to make home security simple and accessible to everyone. All you need are two devices—a Viewer and a Camera device—to set up your home security system. In this article you’ll find out how to use your PC as a Camera device. If you want to use your PC as a Viewer device, please refer to this article.

1.Go to https://alfred.webcam on Google Chrome (Chrome version must be newer than version 79)

2.Sign in with your account

3.Turn on the camera

4.Grant Alfred access to your camera and microphone

5.You must grant Alfred access to your camera in order to use WebCamera. If you blocked Alfred from accessing your camera or microphone, you may click on the camera icon next to the URL to reset your setting. For more detailed instructions, please refer to this troubleshooting article.

If you see the same PC showing up as multiple Camera devices on your Viewer device, please visit this troubleshooting page to find out why and how to eliminate the problem.

⚠️Note: Please make sure you have the up-to-date app version on your Viewer devices before starting to use WebCamera.

Recommended requirements for AlfredCamera

As technology advances and new operating systems and app versions are released, it becomes increasingly challenging to maintain support for older versions. However, at AlfredCamera, we value every user and want to ensure that you can continue to use our products. We understand that not all devices can meet the recommended requirements, so we have provided alternative options to ensure that everyone can continue to use AlfredCamera.

AlfredCamera app:

⚠️ Note: Any app/OS versions above these are fully supported by our team. However, if your device is running below these versions, we cannot guarantee bug fixes, as these older versions are still usable but no longer maintained by us.

To update to a higher app version or operating system, please see the links below to update them on your devices. 

Update the app version:

• Open the or  app

• Search AlfredCamera

• Tap the Update button

Update the operating system:

If your devices are not able to meet the recommended app and OS versions listed above, we recommend referring to the below-listed products as alternatives to continue using Alfred’s service.

Alfred’s Web product:

By refreshing the browser, you will get the most updated Web product version.

AlfredCam (Alfred’s own hardware camera):

To update the firmware of your AlfredCam, please refer to this link for more instructions.

.

<p>The post AlfredCamera Setup Guide first appeared on NVR IPCAMERA SECURITY.</p>

Part 1: How do I install a Hard Drive in a Hikvision NVR?

Any setup with an NVR will need a hard drive to function as it is what all your footage is saved to. The WD Purple Drive is our go-to recommendation for the vast majority of IP setups as it designed with the high workload requirements of 24/7 surveillance solutions in mind. Please see the guide on picking the right HDD to better understand your storage needs and why we don’t recommend using HDD’s that aren’t optimised for use in a CCTV system.

Please see the five simple steps below for getting your hard drive installed into your NVR:
.

.

Step 1:
.

Firstly, you’ll need to locate and remove the screws that secure the NVR’s casing to the base so that you can access the inside of it. Typically, you’ll find two of these screws on the back of the unit and, depending on the NVR model, more on the sides – Do not lose these screws!​

.

.

Step 2:
.

Once inside, your NVR will look something like this. The parts in here you’ll need to identify are the:​

.

.

Now look at your HDD – fewer things to identify here:​

Step 3:
.

Get your hard drive and NVR connected – You can screw the drive into its bay in NVR first if you wish, but it’s normally easier to wire everything up first. Plug one end of the SATA interface cable into the HDD and the other into the corresponding port on the motherboard, then do the same with the SATA power cable. If the power cable has come already connected to the motherboard, then just plug the other end into the HDD’s SATA power port.​

.

.

Step 4:
.

You now just need to screw the HDD into the bottom of the NVR via the screw holes located in the HDD and corresponding holes in the HDD bay (insert the screws from underneath the NVR into the HDD inside – it can be a bit fiddly).​

.

Step 5:
.

Finally, screw the NVR’s casing back onto the base. Your HDD is now installed and ready to be formatted during the initial NVR setup, which is explained in Part 2.​

How do I set up my Hikvision IP CCTV System

Read More : Hikvision How To Tutorials Chapter 1

Part 2: How do I complete the basic setup of my Hikvision NVR?

You now need to configure the NVR so that it’s ready to connect to your network. Don’t worry – this is simpler than it sounds. This initial setup is simplest when done on the local GUI, using a directly connected monitor. The following steps walk you through this initial setup process:

Note – Avoid plugging anything into the back of the NVR until instructed to do so in this tutorial.

Firstly, you’ll need to look at the back of your NVR and make sure you can identify the following parts that are needed for this stage:
.

[1] – PoE (Power over Ethernet) ports (Most Hikvision NVRs have PoE ports which will power any camera via the network cable. Those that do not will require you to connect the camera across remotely, using a separate PoE injector or switch for power.)
​

[2] – VGA display port
​

[3] – HDMI display port
​

[4] – USB port(s) (and mouse – one should come included with the NVR)
​

[5] – LAN port (and ethernet cable – Cat5e or Cat6 is fine)
​

[6] – Kettle power socket (the power lead is included with the NVR)​

Now, follow these steps. It is easier if you leave your cameras disconnected until prompted later in this guide:

Step 1:
.

Plug the kettle plug into the power inlet to connect the NVR to a power supply.​

​

​

.

​

Step 2:
.

Connect your NVR to a display (this can be any monitor or television) by connecting either an HDMI or VGA cable from the monitor to the corresponding port in the back of the NVR.​

​

.

​

Step 3:
.

Plug your USB mouse into one of the NVR’s USB ports.​

​

​

Step 4:
.

Use an ethernet cable to connect your NVR to your local network – Plug one end of the cable into the RJ45 ports into a network access point (such as an ethernet port on your router), and the other into the LAN port in the back of your NVR.​

​

​

.

​

Step 5:
.

Turn the NVR on and let it boot up. Ignore the beeping noise, it’s completely normal and just the NVR telling you that it isn’t properly configured yet.​

​

You may get a prompt to adjust the NVR’s resolution to match the connected display, click “yes” to view everything in the best resolution supported by your display.​

​

​

​

Step 6:

​

Set your language when prompted.​

​

​

​

Step 7:
.

Set a password for the NVR , as well as a “Channel Default Password”, which will be passed onto any inactive device that is directly connected to the NVR’s PoE ports. We recommend keeping these passwords the same for simplicity’s sake. It’s key that you set a password that the NVR defines as strong and that you remember this password, as resetting the passwords on Hikvision devices can be a hassle that you want to avoid, if possible.​

​

Note – If you have lost your password then please see our guide on How to Reset the Password of your Hikvision Camera/NVR in 5 steps using the SADP Tool​

​

​

​

Step 8:
.

Now set a valid “reserved email” address for the NVR, which Hikvision will use for verification if you need to reset your password.​

​

Step 9:
.

Next, set an unlock pattern of your choice by using your mouse to draw any shape you like – you will be asked to do this twice to confirm the pattern. This will be used to quickly login to your NVR in the local GUI.​

​

​

Step 10:
.

Now, set your time zone, your preferred date format, and date/time.​

​

​

Step 11:

​

On the Network Setup page:​

​

Leave the “NIC Type” as it is.​

​

Either leave the “Enable Obtain DNS Server” box ticked, or untick it and use one these recommended public DNS servers.​

​

It is best to leave the “Enable DHCP” box unticked here. Instead, set the “IPv4 Address” of the NVR to an unused IP address on your network, which is within your gateway’s range. Your Gateway will typically be the IP address of your router. E.g. if your router’s IP address is “192.168.1.1”, you’ll want to give the NVR an IP address within the range of “192.168.1.x”, where “x” is any unused address between “2” and “254”.​

​

Note – DHCP can be left on during this stage of the setup to automatically assign your NVR an open IP address if you like, just be sure to turn it off again once your system up and running. To disable it again once set up, just go to: ​

System/Configuration→ Network → TCP/IP → DHCP Off → Apply​

​

Input the Subnet Mask of your network (typically it’s “255.255.255.0”) and “IPv4 Default Gateway”. If you’re unsure of these, see the below articles which explain how to check what they are and if a particular IP address is available:​

​

How-to: How do I find my router and PC’s IP address using a Windows PC?​

How-to: How do I find my router and Mac’s IP address using a Mac?​

​

The “Internal NIC IPv4 Address” can be left as it is, this just refers to the NVR’s own LAN address (so Plug and Play cameras will use IP addresses on this range).​

​

​

​

Step 12:
.

You can now stop the annoying bleeping! Select your hard drive(s) from the list and click “Init” to format it, and then “Next” when the formatting has completed.​

​

Note – This will completely wipe the drive, so please make sure that any that are being reused to not have data that you might need on them. ​

​

Step 13:

​

The next page is for the Camera Setup. As mentioned earlier, we recommend connecting any cameras after the NVR setup process has completed, so you can skip this page.​

​

Note – Please see part 4 for the instructions for adding cameras to your NVR after the initial setup. ​

​

Step 14:
.

You will now be taken to the platform access page. Again, skip through and leave this for now.​

.

Note – Please see part 12 for adding the NVR to the Hik-Connect app, which revisits this page. ​

​

​

Step 15:
.

Finally, you’ll be taken to the Change Password page and given the option to set a new admin password. Ignore this, unless you actually want to change your password. Remember, your admin password is different from your activation password, which you’ll need to use when activating individual cameras on your network.​

​

Click “Exit” and “Yes” on the “Exit Wizard” popup.​

​

​

.

That’s the initial setup of your NVR complete. You should now be taken to the NVR’s live view page (you won’t see your cameras until these are connected in Part 4), with your main navigation menu at the top of the screen.​

​

Check out the other pages for more!

.

<p>The post How do I set up my Hikvision IP CCTV System first appeared on NVR IPCAMERA SECURITY.</p>

The Avigilon AI NVR is a network security appliance that provides all of the functionality of an Avigilon Network Video Recorder with:

System Recommendations

.

Uninterruptible Power Supply

Use an uninterruptible power supply (UPS) system to protect your video surveillance system hardware. A UPS system is used to protect critical equipment from mains supply problems, including spikes, voltage dips, fluctuations and complete power failures using a dedicated battery. It can also be used to power equipment during the time it takes for a standby generator to be started and synchronized.

.

Camera Frame Rate

The AI NVR can provide analytics for non-analytics cameras. For optimal analytics performance, the source camera should stream a minimum of 10 frames per second (fps).

.

.

NOTE

It is acceptable to use frame rates lower than 10 fps for LPR analytics.

.

Web Browser

Basic administration settings for the AI NVR are managed through its Server Management page, which can be accessed from the ACC Client application or a web browser on a network workstation connected to the AI NVR

Supported web browsers for Windows®, Mac or mobile devices include:

.

.

NOTE

Your web browser must be configured to accept cookies or the Server Management page will not function correctly.

It is recommended to use the latest version of any supported web browser.

Networking

When locating where to install the AI NVR in a multi-server deployment, consider the following items:

.

Passwords

The first time you start the AI NVR you must create new administrator passwords for both:

Without these passwords the AI NVR can only be brought back into service by resetting it to its default state as it was when first delivered — all recorded data, updates made to the ACC Server software, and all configuration settings are lost and cannot be restored.

.

Certificate Management

By default, the AI NVR is configured with a self-signed certificate, which generates a connection warning in the web browser. Organizations that deploy their own PKI can use the Certificates pane of the Server Management page to manage certificates on the device. For more information, see Manage Certificates on page 36.

Package Contents

.

Ensure the package contains the following hardware:

.

.

NOTE

North American AI NVR Premium and Premium+ models come with two sets of two power cables. One set is rated NEMA 5-15P / C19 and the other set is rated C19 / C20. Use one of these sets of two power cables to power your AI NVR Premium and Premium+ models. Do not mix and match the cables by using one cable from each set.

AI NVR Premium and Premium+ models in other regions will receive a single set of 2 power cables.

Avigilon AI NVR User Guide

Read Next : Avigilon DVR/NVR Password Reset All Model

Overview of the AI NVR Premium and Premium+ Models

.

.

.

....

.

.

......Figure 1: Front view of AI NVR Premium and Premium+ showing information tag (accessible after removing front bezel)

.

...

.

Figure 2: Front view of AI NVR Premium and Premium+ with bezel removed.

.

.

.

......

.

.

Figure 3: Back view of the AI NVR Premium and Premium+.

.

.

NOTE

North American AI NVR Premium and Premium+ models come with two sets of two power cables. One set is rated NEMA 5-15P / C19 and the other set is rated C19 / C20. Use one of these sets of two power cables to power your AI NVR Premium and Premium+ models. Do not mix and match the cables by using one cable from each set.

AI NVR Premium and Premium+ models in other regions will receive a single set of 2 power cables.

Overview of the AI NVR Standard Models

.

.

.

.

.

Figure 4: Front view of AI NVR Standard showing information tag (accessible after removing front bezel)

.

Figure 5: Front view of AI NVR Standard with bezel removed.

.

.

.

Figure 6: Back view of the AI NVR Standard

Overview of the AI NVR Value Models

.

.

.

Figure 7: Front view of AI NVR Value showing information tag (accessible after removing front bezel).

.

Figure 8: Front view of AI NVR Value with bezel removed.

.

.

.

Figure 9: Back view of the AI NVR Value

NIC Teaming for Network Resiliency

.

To further increase network resilience, it is recommended to use network interface controller (NIC) teaming with the AI NVR network connections. This can be set up using the Server Management page.

.

.

TIP

The AI NVR supports three types of NIC teaming. For more information, see NIC Teaming Modes below.

.

NIC Teaming Modes

The AI NVR supports three types of NIC teaming: Active Backup, Dynamic Link Aggregation (IEEE 802.3ad), and Adaptive Load Balancing.

.

Active Backup

In this mode, one port out of the teamed network ports is designated as the primary port, and the others are set as the backup ports. While the primary network port is functioning properly, the backup ports will not be used. In the event that the primary network port fails, the backup network ports will take over. Both network ports work as unique virtual network interfaces with a single mac address visible to other network devices.

.

Dynamic Link Aggregation (IEEE 802.3ad)

In this mode, all of the teamed network ports will be aggregated into a single connection that has a combined bandwidth equal to the sum of all the teamed port’s individual bandwidth. All teamed network ports will be utilized simultaneously while in this mode and all devices using the teamed ports will operate at the same speed and duplex. If one network port were to fail, then all traffic will be forced through the remaining network ports and your bandwidth will be reduced to the sum of the remaining ports’ bandwidth.

.

.

NOTE

This mode requires a switch that can support IEEE 802.3ad Dynamic Link Aggregation, and will require some setup on that switch.

.

Adaptive Load Balancing

In this mode, both network ports will be used as separate 10 Gb/s or 1 Gb/s connections, but the AI NVR will attempt to dynamically load balance the transmitted and received traffic that passes through each network port. Each network port can be connected to different network switches on the same IP subnet to increase redundancy. In the event that one network port fails, all traffic will be redirected to the working network port.

This mode provides many of the benefits of Dynamic Link Aggregation without the need for any switch configuration or support. Additionally, this mode supports network ports of different speeds (10 Gb/s and 1 Gb/s) to be teamed together.

Setting Up the AI NVR

.

Install the Sliding Rack Rails and Cable Management Arm

If the AI NVR will be mounted in a server rack, install the Sliding Rack Rails and the Cable Management Arm (CMA) provided in the appliance package. Follow the procedures outlined in the Rack Installation Instructions and the CMA Installation Instructions provided in the assembly kits.

.

.

NOTE

When rack-mounting the recorder, ensure no interference occurs from the sliding arms of adjacent equipment in the rack. Every sliding rack rail on the server rack must be aligned before you insert the recorder into the rail for a smooth installation. For more information, refer to the dimensions in your server rack design documentation.

.

Install the Bezel

The bezel can be installed on the front of the recorder to help protect the hard drives against unauthorized access.

.

.

.

Connect the Cables and Power On

Refer to the diagrams in the Overview section for the location of the different connectors. Make the following connections as required:

Download and Install the Latest ACC Client Software

Install the latest version of the ACC Client software (from avigilon.com/support/software) on a workstation connected to the same network on which you are going to connect the new AI NVR.

.

.

NOTE

The first time you access the web site from which you download the software you will be prompted to register. Enter all of the required information and click Complete Registration. Your registration is automatically accepted and you will proceed to the web site.

.

Connect to the AI NVR (using DHCP)

If you use DHCP to assign IP addresses in your network, the new AI NVR is immediately detected after it is connected to the security network. The ACC server software then adds it to the list of sites that is displayed in the System Explorer when you start the ACC Client.

.

.

IMPORTANT

Save the password in a secure format and location either physically or electronically so that it can be retrieved if the password is forgotten.

5.In the Explorer right-click on the AI NVR and select Setup.

6.Click to select the server below the site you right-clicked in the previous step.

7.Click Server Management.

8.Click Trust on the certificate message that opens.

9.You are prompted to log in to the Server Management interface.

You are prompted to create a new password for the administrator user of the AI NVR operating system. Enter and confirm the new administrator password, then click Apply. It is recommended to not use the same credentials as the ACC system administrator.

.

.

IMPORTANT

Save the password in a secure format and location either physically or electronically so that it can be retrieved if the password is forgotten.

The Dashboard panel of Server Management for the AI NVR is displayed.

.

.

NOTE

On subsequent logins, you will need to enter the administrator username and this password when logging in to the AI NVR Server Management interface. The administrator is the only user that can log in to the Server Management interface.