.

Hikvision is one of the world’s largest video surveillance manufacturers and a leading brand in the video surveillance industry. Their top-of-the-line IoT solutions and video security systems set them apart from other DVR brands.

However, since all recorded videos get stored on the DVR’s hard drive, they might get accidentally deleted or lost. Losing CCTV footage can have potentially disastrous consequences if there’s some important information on the deleted or corrupted videos.

But don’t start worrying just yet. If you find yourself in such a situation, go through our detailed guide on how to recover deleted videos from the Hikvision CCTV system or DVR without any complications.

.

Can You Recover Deleted Hikvision DVR Recordings?

Yes, using data recovery software, you can restore deleted Hikvision CCTV footage from different data storages like a hard drive, SSD, or Hikvision SD cards.

There are several available methods to assist users with recovering deleted videos. But before we dive into recovering corrupted or deleted videos from Hikvision CCTV systems, we must understand the various possible reasons for data loss and the corresponding solutions for data recovery.

To avoid significant data loss from the DVR due to unforeseen issues, make sure that you back up video recordings periodically.

How to Recover Permanently Deleted Hikvision DVR CCTV Footage

.

Before we look at ways to repair corrupted Hikvision DVR data storage, let’s go through what you can do to recover your data beforehand. Some methods used to perform hard drive data recovery can result in the deletion of your existing data. Thus, you must first retrieve your lost Hikvision DVR recordings.

.

Perhaps the best way to restore deleted Hikvision CCTV footage is to use trustworthy video recovery software. While several data recovery tools are available on the market, Disk Drill is one of the best data recovery apps.

✅

Disk Drill is a trustworthy DVR data recovery software with an impressive track record for successful recoveries, and it supports over 300 file types. While Disk Drill can retrieve deleted or lost video files in the MP4 format supported by Hikvision surveillance videos, it also supports other video formats such as AVI, FLV (Flash video), M4V (iTunes video), MPG (MPEG video), WMV (Windows Media Video). Moreover, the software is available on all major file systems – Windows, Mac, and Linux.

Disk Drill also comes packed with advanced features like S.M.A.R.T. disk Monitoring (hard drive health checks) and byte-to-byte level backups that can be useful in retrieving data from corrupt hard drives. Here’s a detailed guide on how to recover deleted or corrupted videos from Hikvision CCTV using Disk Drill:

1.Before you begin the recovery process, unmount the Hikvision DVR hard drive.

2.Download and Install Disk Drill.

3.Connect the unmounted hard drive to your computer or PC directly or via an adapter.

4.Launch Disk Drill on your computer. Now, select the hard drive from the list of devices your computer can access. While Disk Drill selects the All Recovery Methods option by default, you also choose from other recovery methods – Quick Scan or Deep Scan.

5.Click Search for Lost Data. Disk Drill’s advanced algorithm will scan through data storage for your deleted Hikvision CCTV recordings. The software also allows you to pause, save or resume the scan whenever you want.

.

6.Once the scan is complete, you can filter through the results. Now, click Review Found Files. Disk Drill allows you to preview the files you want to get back and even recover up to 500 MB of data for free!

7.Once you’ve selected the videos you wish to restore from the Hikvision DVR hard drive, click the Recover button.

👀

You can also use the filter option to quickly locate your CCTV recordings. For instance, key in “mp4” into the top right hand corner field box and hit Enter.

8.Type in the recovery location and ensure you’re restoring your files to a different device from which you’ve just recovered data. Finally, click Ok.

🔗

You can also use these steps to recover deleted or lost videos from other devices, such as video cameras or deleted dash cam footage. To learn more about Disk Drill and all its premium features, you can go through our comprehensive Disk Drill review.

How to Fix Corrupted Hikvision DVR Data Storage

After successfully retrieving lost Hikvision DVR recordings, you can attempt to fix corrupted Hikvision DVR data storage. Follow our step-by-step guide to repair the hard drive without any hassles.

Method 1. Repair Partition Using TestDisk

TestDisk is a powerful, open-source data recovery tool primarily designed to recover lost partitions, fix partition tables and rebuild the boot sector. It’s available for free and can run on all major operating systems. Once you’ve recovered your deleted videos, you can attempt to repair the corrupted Hikvision DVR hard drive using TestDisk.

.

Interesting Read: How To Face Detection – Face Recognition

Here’s how you can repair partition using TestDisk:

1.Download and unzip the TestDisk folder. In our case, the folder was named “testdisk-7.1.win”.

2.Right-click testdisk_win and click Run as administrator.

3.Use the arrow keys to select the No Log option, then hit Enter. You can also click Create to create a log if you like, append info to an existing one, or not create one at all.

4.Now, select the Hikvision DVR hard drive and press Enter.

5.Select the partition table type. For Windows users, select Intel. Now, press Enter.

6.Next, select the Analyse option and hit Enter. On the next screen, click Quick Search to begin the partition recovery process.

7.After the scan is complete, the missing partition will appear on the screen. Select the partition you wish to recover and follow the prompts on the screen. Move to the Write option and press Enter.

8.Press Y to write the partition table and press Enter again.

To know more about the pros and cons of using TestDisk to recover data and partition recovery, look at our in-depth TestDisk review.

Method 2. Scan Your Drive Using CMD (chkdsk)

The CheckDisk utility (chkdsk) is an in-built command in Windows that can scan and resolve any problems it discovers on your hard drive. If bad sectors or errors on your Hikvision DVR disk have caused data to be deleted or overwritten, they can be repaired using the CMD prompt.

Here’s how you can scan and fix the DVR hard drive with the CheckDisk utility:

1.Go to the Start menu and type in cmd. Now, select the Run as administrator option.

2.Once the Command Prompt window opens, run the following command: chkdsk F: /r (Remember to replace F with the drive letter assigned to your hard drive).

👀

Here, we’ve used the /r parameter. It fixes any errors on the disk and searches for bad sectors.

.

FAQs

.

How to recover overwritten CCTV footage from Hikvision DVR?

.

Here’s how you can recover overwritten CCTV footage from Hikvision DVR:

.

.

What is the best DVR data recovery software?

.

While several data recovery tools are available on the market, Disk Drill is the best DVR data recovery software. It supports the MP4 format supported by Hikvision CCTV footage and other video formats such as AVI, FLV (Flash video), M4V (iTunes video), MPG (MPEG video), WMV (Windows Media Video). Moreover, the software is available on all major file systems – Windows, Mac, and Linux.

.

.

Can you recover deleted CCTV footage for free?

.

There are certain data recovery software that offer free recovery. For instance, Disk Drill allows you to recover up to 500 MB of CCTV footage for free. If you need to recover more data, check out software like PhotoRec and Recuva

.

.

Does CCTV footage get deleted automatically?

.

It depends on the DVR settings and the capacity of your hard drive. In some cases, old CCTV footage may be deleted periodically, i.e., after a month or a week. In other instances, CCTV recordings may get deleted or overwritten due to a lack of space.

.

Conclusion

The videos and recordings from CCTV surveillance systems often hold essential security information. The methods outlined in this article should answer all your questions on recovering lost or deleted CCTV footage from Hikvision DVR hard drive.

You can use these techniques to retrieve surveillance videos from any Hikvision CCTV camera model and even repair the corrupted DVR hard drive for future use.

<p>The post How to Recover Deleted CCTV Footage From Hikvision DVR first appeared on NVR IPCAMERA SECURITY.</p>

Access from smartphone

(1)Download APP

Search and download “Eseecloud” app from App store or Google play on your phone.

.

(2) Register

 If you install and open “Eseecloud” app at the first time, an account need to be registered initially.

ce”.

.

(3) Add device

Method 1: Add the device via QR code.

EseeCloud Devices Advanced User Guide

Read Next : EseeCloud Wireless Security Camera System Installation.

.

Method 2: Add by cloud ID.

     Cloud ID: Enter NVR’s System Setup – Network Setup to input Cloud ID or Scan QR Code)

     Device name: Choose a name for your system of your choice.

     User Name: Enter the NVR’s User Name (default: admin)

     Password: Enter the NVR’s Password (default: NO password)

.

.

Method 3: Add by LAN scan.

Please make sure you are connected to the same wifi.

.

Access from remote PC

1. Access from remote PC (Log in with Cloud ID)

Operation Steps: ( We suggest you to use microsoft IE, otherwise some services will be invalid. )

1. Open your browser

2. Enter http://www.e-seenet.com

.

Cloud ID: (Enter NVR’s System Setup-Network Setup to input ID or Scan QR Code)

Username: Enter the NVR’s User Name (default: admin)

Password: Enter the NVR’s Password (default: NO password)

3. Enter the correct device ID, user name and password.

4. Click login to enter live view interface.

.

Note: To successfully remote access your system, the device ID should be ONLINE.

.

2. Access from PC Client (CMS)

1. Please download CMS from the below link:

http://www.tontonsecurity.com/download/page_show_67.html

2. Login user: admin, password: (default: NO password, please keep it blank)

3. Please enter “Add” to add device, you can add it “By IP/DDNS” or By Cloud ID”

4. By IP/DDNS:

IP/DDNS: (Enter NVR’s System Setup-Network Setup to find IP)

Port: (default: 80)

Username: Enter the NVR’s User Name (default: admin)

Password: Enter the NVR’s Password (default: NO password)

Device name: Choose a name for your system of your choice.

Type: choose “NVR”.

Number of Channels: please input the correct number of the channels.

Click “Finish” and go back to “Preview”, click the device name to view live video.

5. By Cloud ID:

Cloud ID: (Enter NVR’s System Setup-Network Setup to find IP)

Username: Enter the NVR’s User Name (default: admin)

Password: Enter the NVR’s Password (default: NO password)

Device name: Choose a name for your system of your choice.

Type: choose “NVR”.

Number of Channels: please input the correct number of the channels.

Click “Finish” and go back to “Preview”, click the device name to view live video.

Add the IP camera to the NVR by matching code

1.  When you use Match Code
1.1 Add new add-on cameras to your system
1.2 Re-pair camera to NVR when they lose connection. You need to delete the
Network Unreachable channel at first, then re-pair the camera to an unoccupied
channel. (unoccupied channel always shows No Video Source under Status.)

Tips: The IP cameras in pre-packed kits have already been paired to the NVR. So the
cameras will automatically connect to the NVR once they are plugged in power.

2.  Add camera by matching code.
2.1  Power on the camera which has no video, and connect this camera to the NVR
via Network cable.

.

2.2  Right click mouse on the main interface, select “Video Manage“

2.3  Click “Refresh“, find the camera’s IP. Click “Match Code“, then click “Yes“, the
NVR will start to match code to the camera.

.

2.4  After matching code successfully, the “status” will show “Connect success“.

Then you will see the camera is added to the NVR and display video on the screen.

.

What is the WiFi distance of the wireless kits?

.

Between each camera to the NVR:

In open space we tested 350m (1150ft) working distance;

With normal obstacles like 1-2 walls, we tested 35m (115ft) working distance.

For distance we only have theoretical values.

No certain distance can be guaranteed due to different environments applied in.

It varies depending on obstacles and signal interference.

on the contrast, if there are many blocks and signal interference between, the distance could be closer. 

.

What if your NVR system keeps beeping?

1. Please right click your NVR mouse, then click System Setup – General Setup – Error setup, make sure that “Enable” and “Buzzer” are unchecked.

2. Please right click your NVR mouse, then click System setup – Channel setup –  Video detection, make sure that “Buzzer” is unchecked for all channels.

3. If you have checked above 2, and none of the buzzer are checked.

    Follow below to stop the beeping:

    a. Right click your NVR mouse, then click System setup – System Admin –  Factory setting, uncheck WiFi Reset, then click Apply to reset NVR settings.

    b. If you cannot view the cameras on the NVR after resetting, please right click your NVR mouse, then click Exit system, choose shutdown. Follow on-screen message to unplug NVR from power and then re-plug it back to NVR. Wait for NVR to initialize.

Then the cameras shall come back.

.

How to upgrade the NVR system

.

.

1. Please download the update file to your computer and unzip it, then plug the USB flash drive,and move the unzipped update file to the root directory of the USB flash drive. 

Note: 

1)Please move the update file to the root directory of the USB flash drive, do not move the subdirectory.

2)Do not change the file name.

.

.

2. Connect USB-disk/mouse and USB hub with NVR shown as flowing.

.

.

3. Enter the NVR’s menu (System setup\System Admin\System upgrade),
Click “Start” to begin upgrading.
.

Note: Please keep power supply well during the upgrade.

.

.

4. Once the upgrade is done, NVR will restart system automatically.

.

.

How to view playback on NVR system

.

1. Right click the mouse , choose video playback

.

2. In the menu bar on the right, choose record type/channel/data to search what
you want to and click playback.

.

3. Click Backup and the video will be saved in USB storage

.

How to Add C8601 Cameras to Tonton NVR System

.

Document

.

or

.

Video

.

How to connect and set up the Wireless Network Camera System?

.

.

1. Connect the DC 12V/2A power adapter to the Power port of the NVR.

When Power indicator light is on, NVR starts to work.

2. Use VGA / HDMI cable to connect your NVR and Monitor / TV, then preview interface can be seen.

3. Plug the network cable and mouse to the ports of NVR rear panel.

4. Connect the DC 12V/1A power adapter to the IP camera (IPC).

Each camera has one 6ft length power adapter.

5. After finish connecting, the NVR will search the IPC automatically and start to initialize the connection.

When completed connection, the images will display.

6. Login this system:

Username :  admin

Password:  (there is no password, please keep it blank)

(Note: if you want to change the password, you can go to NVR’s System Setup – System Admin -User management – Set password to change it.)

7. Then you can follow up the below steps to set up on your phone:

If you want to view the cameras remotely, the NVR should be connected WAN network, Please ensure DHCP in your Router is open.

If you don’t know how to enable the Router’s DHCP, please input the IP Address of your  

Router to IE browser, then you will find the network information, you can enable the “DHCP”.

After that, please go to NVR’s System Setup – Network Setup to enable “DHCP”

Then the system will obtain the IP Address, DNS from your Router automatically.

Or you can go back main menu to select “Fast Network”, Then the system will connect the WAN network automatically.

8.   Access from smartphone

(1). Please download “Eseecloud” app from App store or Google play on your phone.

    (2). If install and open “Eseecloud” app at the first time, an account need to be registered initially.

(3) Add the device.

Method 1: Add the device via QR code.

.

.

Method 2: Add by cloud ID.

Cloud ID: Enter NVR’s System Setup – Network Setup to input Cloud ID or Scan QR Code)

Device name: Choose a name for your system of your choice.

User Name: Enter the NVR’s User Name (default: admin)

Password: Enter the NVR’s Password (default: NO password)

.

.

.

Method 3: Add by LAN scan.

Please make sure you are connected to the same wifi.

.

.

9. Access from remote PC (Log in with Cloud ID)

    PC : our item only support IE browser, please input “www.e-seenet.com” to IE Browser to view your cameras.

       Cloud ID: (Enter NVR’s System Setup – Network Setup to input ID or Scan QR Code)

       Username: Enter the NVR’s User Name (default: admin)

       Password: Enter the NVR’s Password (default: NO password)

(Input the correct Cloud ID, user name and password, click login to enter live view interface.)

.

NVR video backup.

1.Right click mouse > select Video backup.

.

2. Enter into the interface of Video backup.

   Select Channel, Record mode and Search time.

   Click “Search”. After that, the chosen video will display in the list.

3. Select the section which you want to backup.

   Then, click the bottom “Backup”.

4. Next, there will pop up a dialog box asking are you sure to backup this record.

   Click “Yes” if you are sure.

   Before start to backup, system will inform you to insert U disk within one minute. 

   If you want to cancel the operation of backup, you can click “Cancel” to withdraw.

   NOTE: The NVR only one USB port, so you have to unplug the mouse

and plug the U disk within one minute.

5. After you insert U disk, what you should do is just wait a moment.

6. Backup is completed when system inform you “Backup record succeed“.

   And you can unplug your USB disk at that time.

.

How to setup audio function?

1. System connection

(1) The monitor must have HDMI input port.

  (2) Connect the HDMI port on both sides with the included HDMI cable.

2. NVR setup

  (1) Choose the option “Private” on this interface during NVR’s restarting. It allows you select audio or not.

(2) Check whether the encode mode is “AV stream” or not.

(3) On the live window, click mouse to select any channel to pop-up the hidden volume icon like a speaker, click it repeatedly to hear or mute the sound from camera.

.

How to use a new Gmail mailbox account to set NVR mail alarms?

How to use a new Gmail mailbox account to set NVR mail alarms?

1.Register a new Gmail mail account, and log in.

2.Get into your mailbox>click the “” in top right of page>get into “My Account“.

3.     Click “Sign-in&security” and enter the interface,Turn on “Allow less secure APP on“.

4.  After that, you will receive an email from Google, which means “less secure sign in” has been turned on.

5. Get into NVR system. Right click mouse>select System setup>Network setup>Network Status.

   Check if your NVR’s network connected successfully.

   Before operate what mentioned above:

    Make sure Cloud(P2P) display “ONLINE“.

   Make sure the Network Status display “Healthy Network“.

6.Then, click the “E-Mail”. 

Input your Gmail SMTP Server (smtp.gmail.com) in ” SMTP Server” Input your Gmail account in “Username” and “Sender”.

Change the “Encryption Type” to “TLS”.

Input your Gmail password in “Password”

Input your two inbox address in “Sendee 1\2” 

After that, click “Apply”>click “Test”.

7.        When the system remind you “Test successful”, which means NVR’s mail alarm is set successfully.

8. PIR video detection setting as below picture:

    (1). Click “Channel setup” and “Video detection”

    (2). Choose Motion Detection, disable it

(3). Choose PIR Input Armed Detection, Enable E-mail Notice

9. After finished setting, When alarm is triggered, you will receive email from NVR.

PIR alarm setting

Only PIR detection recording setup

1.      Disable motion detection function, click ok to save

2.      Choose Detection Model with PIR Input Armed.

Please noted: If you want to set Buzzer, Email notice or App alarm, you can enable them, in this way, you will get notification on email or App.

3.      Press “Reset” to clear default setting

.

4.      Click the icon “Alarm”

5.      Press and drag the left button of the mouse to select needed schedule.

6.      Click ok to save

7.      Cancel the manual recording mode

.

.

.

8.      Once the PIR detection is trigged, the live window will display an icon like below, it means PIR recording is running

.

How to Reset NVR’s Password

Reset NVR’s Password

1. The interface when you log in. 

 2. Click “OK”. If you input incorrect password,

     monitor will display “Username/Password Is Incorrect!”.

 3. Continuously and successively click left button and right button in blank space of prompt box for six times.After that, monitor will display “Restore default user”.

4. Click “Yes”, and you will access to the interface where you can reset NVR’s password.

Tips:   1. The username must be “admin”, or else the password won’t be retrieved.

           2. If you want to make new password, please leave it blank in column of “Old password”.

           3. Delete the old password after reset the new one.

           4. If you have set a new password for NVR, remember that NVR password cannot exceed 10 characters, or the NVR will not save it correctly.

.

 reset NVR’s password             click to download video

How to install iSmkit PC client 

.

How to install iSmkit PC client                  Click here to download

Gmail Mail Configuration Guide

(DE) Gmail Mail-Konfiguration Anleitung 

click here to download

.

(FR) Guide de configuration de Gmail Mail 

click here to download

.

(CN) Gmail邮件配置指南操作步骤20230922

click here to download

.

(EN) Gmail Mail Configuration Guide 

click here to download

.

Email SMTP and POP3 settings

.

click here to download

.

Solve the problem of the white light always on(Applicable to 3.6.60 and above Version)

Precautions:

1. Please check your IPC version first, only 3.6.60 and above version can be solved the problem through upgrade.

2. The camera must be able to produce the image, if the camera can’t be viewed or resetted, it can’t be upgraded.

.

Check IPC Version:

Go to “System Admin” – “IPC Maintenance” to check the version of the problem camera. Please note: Don’t upggrade the version 3.6.16 and below version with these upgard file.

.

Download the upggrade file:

For 3.6.60 Version: Download Link

For: 3.6.60 Above Version: Download Link

.

Upgrade Method

1. Upgrade the IPC via NVR system

（1）Please download the update file to your computer and unzip it, then copy the update file(IPCAKV3C_xxxxx.rom) to a USB flash drive. Please note: Don’t change the file name

（2）Plug the USB flash drive to the NVR’s USB interface

Enter the NVR’s menu (System Setup-> Channel Setup-> IPC Upgrade)

.

.

（4）Click the “Channel” and select the upgarde channel of the IPC.

.

（5）Click “Start” and “Yes”, the IPC will be upgrading. Please note: During the upgrade, please don’t power off the NVR and the camera.

.

.

（6）If the camera upgraded successfully, the Status will show “Success!”.

.

.

2. Upgrade the IPC via TF card.

.

.

（1）Unzip the upgrade file, then copy the “help.rom” file to the TF card. Please don’t change the file name and move it to the root directory, do not move the subdirectory.

（2）Power off the camera, then insert the TF card to the TF card slot. Then power on the camera.

（3）Waiting for about 1 minutes, the camera will start up. Then press 3 times continuously of the reset button for the camera(In order to prevent operation errors, you can press several times, which will not affect the upgrade).

（4）About 2 seconds later, the camera will makes a sound for an upgrade. Then waiting for about 2-3 minutes, if the camera restart and works normally, it means that the upgrade is successful.

New Manual for Dual light

Click here to download

If the IP camera doesn’t work with NVR system,please check …

1. First of all,please confirm both of the camera and the NVR are powered on .

(1) Camera is powered on: Please plug the power adapter to the camera ,and then cover the IR-Cut with your hand (See picture), finally to check if the night vision will be activated or not .

(2) NVR is powered on : Please plug the adapter to the NVR ,and then see whether the power indicator is on.

.

.

.

.

2. Secondly please enter NVR system — Video Manage ,and check if the status of camera is connected successfully or disconnected. 

.

.

.

3. Thirdly, if the camera is disconnected,please confirm the distance of the camera and NVR system. The far distance will affect the signal transmission.Please follow the below steps to fix the issue:

.

(1) . Please enter NVR system —  Video Manage — delete camera (The same page as the Step 2)

(2). Remove the camera and take it next to the NVR system,and prepare a network cable and start to match code for the camera and the NVR.

(3). How to Match code :

A. Connect this camera to the NVR via Network cable.

B. Right click mouse on the main interface, select “Video Manage“

C .Click “Refresh“, find the camera’s IP. Click “Match Code“, then click “Yes“, the NVR will start to match code to the camera.

.

.

D. After matching code successfully, the “status” will show “Connect success“.Then you will see the camera is added to the NVR and display video on the screen.

.

4. Finally, you could unplug network cable and put the camera to the place where you want .

How to change the channel

.

.

1.Please click “Video Manage”.

.

.

2.Make a note of the camera IP address you want to change.

.

.

3.Click “Manual Edit” and enter the IP address on the corresponding channel.

.

.

How to fix black screen Monitor for 10” /15.6”NVR

click here to download the operation video

.

How to get the NVR system ONLINE?

.

1. Please make sure you enabled DHCP of your Router.

2. If you don’t know how to enable the Router’s DHCP,

    please input the IP Address of your Router to your computer browser,

    then you will find the network information, you can enable the “DHCP”.

3. After that, please plug a network cable to the WAN port on back of NVR.

4. If the system refuses to go ONLINE?

Basic troubleshooting:

  (1).  Check if your network cable can work well.

         If NVR is getting signal, there should be flash light. If not, please check the connection and cable.

  (2).  If the port is right and NVR is still OFFLINE, then it should be DHCP issue.

         Enable DHCP on your NVR.

        Click right button of mouse, go to NVR’s System Setup – Network Setup – check the DHCP and enable it,

        apply and save it. Wait for 1 minute to see if the status on bottom right corner changes to ONLINE.

5. Or you can go back main menu to select “Fast Network“, 

        Then the system will connect the WAN network automatically.

        Within 1 minute, you shall see NVR status changes to ONLINE and the NVR is ready to be viewed

        from anywhere anytime.

6. If this can’t help you, probably your Router disabled DHCP or block new devices from connecting.

    What DHCP does is: when Router find new device connected, DHCP allocate new IP to the device

                              and connect it to the Internet.

   An easiest way to know if your router enables DHCP:

   When you connect a new device to your WiFi for Internet service (or a visitor/ friend wanted WiFi

   connection), does it require WiFi password only? If only password required, then your router has

   DHCP enabled; if that requires not only password but also some settings, then your Router is secured

   from connecting new devices. Please ask people who secured the WiFi (who set password) to enable

   the NVR to connect.

The Step 4 and Step 5 should enable 95% users to get NVR ONLINE.

Even if the status shows OFFLINE after all this, we suggest you to use APP and access the Cloud ID

to see if it works.

Note:   Always wait for 1 minute after any change.

.

Advanced troubleshooting

If the basic steps above does not solve the issue. Follow below steps to do further troubleshooting.

1. Make sure the cable you connect to NVR has Internet access. 

Please use a laptop or any PC has RJ45 port

· Disable the wireless connection of laptop.

· Unplug the network cable from NVR and plug it into the PC, see if the PC can access the Internet via the cable.

· If it does, then the cable is good; if it does not, change a cable.

· If cable is good yet no Internet connection, please ask help from your network administrator

· to give the cable Internet access.

2. Enable DHCP of your router, please refer to Step 2.

.

If you don’t want to use DHCP, or you want to set up a static IP Address for your NVR system,

you can follow the below steps to set up:

   Well, we can allocate IP manually for the NVR and connect it to Internet. 

  1. Know your router gateway. 

  This is the IP that goes to the menu of your router. 

  This will vary slightly from manufacturer to manufacturer, and will be listed in the documentation.

  Here are some common IP addresses for various routers:

   Linksys, 3Com, Asus, Dell, US Robotics: 192.168.1.1

   Qwest (AKA CenturyLink), DLink, Netgear, Trendnet, Senao: 192.168.0.1

   Belkin, Microsoft, and SMC: 192.168.2.1

   Apple: 10.0.1.1

If you have misplaced your documentation, and you do not see your router listed here,

search on Google for your router name and “default IP address” to find the correct information.

Another way to locate your router’s IP address: on a PC, open the command prompt (click on Start >

Run/Search for cmd) and enter ipconfig. Look for the Default Gateway line, and try that number.

On a Macintosh, open the Network control panel (System Preferences…, Network) and look for Router: 

This is your router’s IP address.

2. Go to NVR’s System Setup Network Setup

How to switch wireless connection to wired connection

.

.

1. Please connect IP camera to NVR by net cable

2. Checking the Network setup of NVR, remember the network segment of the IP address with NVR

.

.

3.Right click mouse, Enter into VIDEO MANAGE

.

.

4.Click Refresh, search the IP address of camera which connect to NVR

.

.

5.When you find the IP camera on NVR, please click Modify, revise the IP address of camera to the same network segment with NVR

Please noted: The IP address of camera can’t conflict with the IP address of other devices

.

.

.

.

Click Yes to save

.

.

Double click the IP address, the camera will connect to NVR automatically

.

.

6. After setting the IP camera, connect NVR and the IP camera to the same router by net cable, Refresh NVR, search for the IP camera, then add it to NVR, in this way, the IP camera will connect to NVR by wired

.

When 3MP IPC is added to NVR, it prompts “resolution too big”

.

.

When adding a 3MP camera to the NVR, if the “resolution is too large” prompt appears.Please modify the NVR resolution, the detailed operation is as follows:

.

1.Please click “Video Manage”.

.

.

2.Select the camera that appears “Resolution too big”, and then click “Channel Setup”.

.

.

3.In “Channel Setup-Encode setup”, modify the resolution to 1920*1080, and then click “Apply” to save the settings.

.

.

4.Disconnect the power of the camera and restart it, after adding the camera, the camera can be used normally.

.

.

Dual light and AI function setting instructions

Click here to download

.

iSmKit CMS user manual

Click here to download

.

How to upgrade the 8CH NVR to 10 Channel(Only for Version 3.1.8.0M)

.

.

1. Comfirm your system version if is the version 3.1.8.0M first. 

Note: This update file only supports NVR version(3.1.8.0M) to update to 10 channel, if your system version is not 3.1.8.0M, please don’t use this update file to upgrade your system, otherwise it will cause the system not work.

.

Go to “System Admin” – “System Version” to check.

.

2. Download the upgrade file to your computer. Click here to download

.

3. Unzip the upgrade file via rar or zip, then plug the USB flash drive, and move the unzipped update file to the root directory of the USB flash drive. 
Note: 
1)Please move the update file to the root directory of the USB flash drive, do not move the subdirectory.
2)Do not change the file name.

.

4. Connect USB-disk to the NVR.

.

5. Enter the NVR’s menu (System setup\System Admin\System upgrade), Click “Start” to begin upgrading.
Note: Please keep power supply well during the upgrade.

.

6. Once the upgrade is done, NVR will restart system automatically.

.

Effective Troubleshooting for Non-Functional 16-Inch Monitor

Effective Troubleshooting for Non-Functional 16-Inch Monitor

.

.

Youtube Video: https://youtu.be/QVtIkMScO0Q 

.

1. If the indicator lights in the bottom right are OFF, replace the monitor’s 3A power supply.

.

2. If the indicator lights in the bottom right are ON, but the screen is black, check the screen cable.

.

.

.

If the display shows “Power Saving,” there are two possible scenarios:

.

3. For “No Signal → Power Saving”:

When there is no signal, immediately press the “Auto” button. This will bring up the signal source selection menu. Use the “←” or “→” keys to navigate to the first option (“Auto select”), then press the “Menu” button to confirm.

.

4. For “No Cable → Power Saving”:

Please check the two connecting cables in these locations.

.

.

<p>The post EseeCloud Devices Advanced User Guide first appeared on NVR IPCAMERA SECURITY.</p>

O-KAM Pro APP Download

O-KAM Pro supports Android and iPhone, you can download it from google play or app store.

Login O-KAM Pro

You need to register and login to O-KAM Pro APP to connect the camera, click Register now or email icon to register.

It is recommended to allow all permissions of the APP, otherwise you may not be able to use and connect the O-KAM Pro camera properly.

Read Next : How To SetUp JXLCAM Camera

Connect O-KAM Pro Camera To Wifi

This connection mode supports O-KAM Pro wifi camera and battery camera.

1. Connect the O-KAM Pro Camera to a power source, and if it is a battery camera, press and hold the power button to start the camera.

2. Click + , then scan the QR code on the O-KAM Pro camera, the APP will automatically enter the appropriate connection mode.

If you can’t find the QR code or can’t scan the QR code, please select Wireless camera.

3. Make sure your O-KAM Pro camera is ready to connect, the camera light is flashing or you hear the prompt “Please use the app for Wi-Fi configuration”.

Note: If the light is not blinking or there is no prompt tone, please reset the camera.

Then click ‘I heard the prompt tone or see the indicator light flashing’, go to the next step.

4. Enter your wifi password, then click Next.

Please choose 2.4G wifi, some O-KAM Pro cameras only support 2.4G wifi.

.

See also  O-KAM Pro Camera FAQ and Troubleshooting

.

5. Make sure your wifi is 2.4g and the wifi password is correct, then click Confirm. Give the displayed QR code to the camera to scan.

Place the QR code about 15-30 Inch in front of the camera to scan, and complete the scan after hearing the “beep” sound.

After the connection is successful, it will automatically jump to the next step.

After successful connection, you can test the wifi signal strength, or later in the test, please put the O-KAM Pro camera in the location with strong wifi signal.

The app will prompt you to subscribe, it is recommended to cancel, if you need cloud storage, make sure the O-KAM Pro camera can work properly before subscribing.

AP Mode Connecting O-KAM Pro Camera

If the QR code connection fails or the QR code cannot be scanned, you can try to connect the O-KAM Pro camera using AP mode.

1. Go to your mobile phone’s wifi list to connect to the hotspot wifi of the O-KAM Pro camera, return to the O-KAM Pro APP after the connection is successful, and then the app will auto add the camera.

Below is the name of the O-KAM Pro camera’s hotspot wifi:

2. Go to Settings, select Device Settings, and then click Wi-Fi network.

3. Select your wifi, then enter your wifi password, click Confirm and wait for O-KAM Pro camera to connect to your wifi.

Share O-KAM Pro Camera

Once you have connected the O-KAM Pro camera, if you want your family or friends to use the camera as well, you need to share the camera with your friends via the Share function.

1. Go to the Share screen, then send the QR code to your friend.

Permission Settings:

.

See also  O-KAM Pro Camera FAQ and Troubleshooting

.

2. Have the invitee download the O-KAM Pro APP and register and login, then click + scan the QR code to add a camera.

Connecting O-KAM Pro Camera without a router

If you want to use O-KAM Pro camera without internet or router, you can connect to the included hotspot wifi to use the camera.

This mode only supports close range use.

1. Go to your mobile phone’s wifi list to connect to the camera’s hotspot wifi, after connecting, return to O-KAM Pro, the app will auto add the camera, then you can start to use it.

Below is the name of the O-KAM Pro camera’s hotspot wifi:

Function setup – Wired O-KAM Pro Cameras

The functions of different types of O-KAM Pro cameras differ slightly, so please check your camera type.

If your camcorder needs to be connected to the power supply at all times to work, then it is a wired O-KAM Pro camcorder type, please check the function setting instructions below.

Recording Setup – Wired O-KAM Pro Cameras

O-KAM Pro camera supports cloud storage and memory card recording, cloud storage requires subscription, the following memory card recording settings.

You need to insert the memory card to record, the recording will be saved in the memory card, after inserting the memory card, the camera will sound a voice prompt.

The default is to start 24 hours recording, you can change the recording mode in TF Record Settings.

O-KAM Pro camera supports the following recording modes:

If the memory card shows abnormality, please try to format the memory card and reboot the camcorder.

.

See also  O-KAM Pro Camera FAQ and Troubleshooting

.

View Recordings – Wired O-KAM Pro Cameras

In the live video interface, click TF Card in the lower right corner to view the video saved in the memory card.

Motion Detection Setup

Activate the Motion Detection function in the Monitoring Function, O-KAM Pro cameras support Motion Detection and Human Detection.

Motion Detection

When the camera detects an object moving, it will send an alarm notification to your mobile phone.

This mode may have a high false alarm rate, if you need to detect only suspicious people, we recommend you to choose Human Detection.

Human Detection

The camera will send alarm notifications to your mobile phone only when it detects humanoid objects.

Activity Zone Setup

Setting the detection area allows the camera to detect a specific location, reducing the chance of false alarms.

Smear the area you don’t need.

Detection schedule

Customize the schedule of Motion detection, reduce false alarms. The camera automatically monitors for you during the scheduled time.

Alarm flashing light

After the alarm flashing light is turned on, the camera will automatically flash when motion detection is triggered.

Camera Siren

When Alarm sound switch is turned on, the camera will emit alarm sound when motion detection is triggered, you can choose alarm sound or record your own sound.

Enter Notification Settings, select Camera Siren and then turn on the Alarm sound switch.

Email notification

An email will be sent to you when a motion is detected.

Click Add an email , then enter the email address you want to receive alarm notification and finish the setting.

Auto Tracking

When Person tracking is activated, the camera will Auto Track people’s movements and monitor all activities. It will automatically switch to and focus on the person when they enter the camera’s field of vision.

This feature is only supported by O-KAM Pro cameras that support PTZ.

Human frame

People are automatically framed in the live video Help you filter out motions of other objects and quickly follow the person’s movement.

Night vision setup

O-KAM Pro camera defaults to black and white night vision mode, you can change the night vision mode in Device Settings, Night Vision.

Only cameras with dual light sources support this feature.

Reset O-KAM Pro Camera

Press and hold the O-KAM Pro camera reset button for 5 seconds to reset the camera.

O-KAM Pro Camera FAQ and Troubleshooting

You can find here how to fix O-KAM Pro camera can’t connect to wifi, offline and not working problems.

Why is my O-KAM Pro Camera offline?

O-KAM Pro camera is offline, it means the camera can’t connect to the network properly, please follow the steps below to fix the offline problem:

Is the router working properly?
Connect your mobile phone to the router Wi-Fi, switch off the mobile data, can you access the internet normally? If it is not normal, try to restart the router.

Whether the WiF strength is full or not
Put the mobile phone to the camera installation location, detect whether the Wi-Fi signal is full? If the signal is weak, it is recommended to adjust the distance from the router to the camera.

Whether the O-KAM Pro camera is normal
If a memory card is inserted into the O-KAM Pro camera, power off the camera and remove the memory card, then check if the camera works properly.

Replace the power supply with another one.

If none of the above solves the offline problem, try resetting the camera and reconnecting it.

Why does O-KAM Pro camera keep showing that it is connecting?

.

You can also try:

If it’s a 4G O-KAM Pro camera, please detect if the SIM card’s is in arrears.

.

<p>The post How To Setup O-KAM Pro camera first appeared on NVR IPCAMERA SECURITY.</p>

How do you setup the Zmodo Camera? What quirks does it have that its competition doesn’t? Learn more about Zmodo Wi-Fi surveillance cams and how to use things like the ZMD_SAP network to your advantage through this helpful guide!

As a global provider of smart security systems, Zmodo serves as a dependable Wi-Fi cam alternative to the likes of Ring, Arlo, Wyze, Blink, and Nest. You can see its full abilities through this guide on how to set its cameras up and how to use them to their full potential.

How to setup and use Zmodo camera? It’s simpler than you think. You’ll also be quite impressed with its capabilities such as being able to create a cam network ecosystem akin to Ring’s or Nest’s.

Setup Zmodo camera

Here’s what you need to know about setting up the Zmodo cam.

How to install Zmodo camera?

First off, be aware that you can only set up the Zmodo cam with a phone or tablet (Android or iOS). A pen or pencil and paper might help too. Don’t forget to plug all of your cameras in the same room as the router to keep them within the Wi-Fi’s coverage area.

Also, connect the antennas of all the cameras that came with antennas. They need those. You’ll need to be 5 to 10 feet from the cameras for the hookup to happen.

Go to the Wi-Fi settings of the device you’re setting up the cams with. Make sure you can see ZMD_SAP or AD_ZMD network on the list of Wi-Fi networks available for it.

How to hook up Zmodo camera?

Connect your Zmodo cam to a power source first. Afterwards, download and install the Zmodo app on your phone. From there, just click the “Zink” button and add the number of cameras you want to add unto your Zmodo ecosystem.

Press “Tap Here to Select Wi-Fi” in order to hook up your phone to your Zmodo camera. Choose your device’s Wi-Fi connection. For Zink, it’s ZMD_SAP. For Beam, it’s AP_ZMD.

How to setup Zmodo camera?

In order to setup your Zmodo camera, you’ll need to download from the App Store the Zmodo app. After that, use your email or phone number in order to create your Zmodo account.

Look for the indicator lights on the cams. Confirm that their lights are flashing green. Follow the prompts when installing the cameras, including scanning the QR code.

How to connect Zmodo camera to Wi-Fi?

Connect your Zmodo Cam to Wi-Fi through Zink. You can access Zink by getting the Zmodo app and registering an account. Add a device by pressing the plus icon. Select the number of devices you wish to add to Zink.

Afterwards, connect to the ZMD_SAP network through your phone’s Wi-Fi list. Add your 2.4GHz Wi-Fi network’s name and password to the Zmodo app. Press “Tap Here to Select Wi-Fi” to reconnect to your home Wi-Fi network.

Wait for the device to complete its connection. Name the device once the connection is complete. You can name it whatever you want to make it easier to remember which camera it’s supposed to be.

How to connect Zmodo camera to TV?

To connect Zmodo to a TV like FireTV and Amazon Alexa, do the following. First FireTV should be setup to your network. Open the Amazon Alex app. Click the three lines icon on the upper-left corner of the screen.

Select “Skills and Games” tab. Search for the “Zmodo Skill”. Select the skill then login to your Zmodo account.  Press “Done” and then select “Discover Devices”. The Alexa Skill should then detect your Zmodo cams and have them listed on the “Devices” tab.

You can now use your FireTV to display your Zmodo cameras.

How to connect Zmodo camera to iPhone?

You can connect your Zmodo camera to your iPhone by downloading the Zmodo app to the iOS device and controlling the camera through the app and its Zink connection.

Configure the cameras via your Wi-Fi settings to put them online and allow them to connect to one another as well as with your iPhone and Zmodo app. Your Zmodo cams are now ready to use!

Using Zmodo camera

Learn how to use and troubleshoot the Zmodo camera through the topics below.

How to use Zmodo camera?

After you’ve configured your Zmodo camera by linking it through the Zmodo app and using its exclusive SSID networks AP_ZMD or ZMD_SAP, you should easily use the app to monitor your home’s surroundings.

You can do things like acqui,r,e remote views of your home when you’re away at the office, or on vacation, activate motion detection to stealthily catch intruders, or use its infrared night vision to safeguard your home at night.

How to View Your Zmodo Cameras on a Computer?

Open command prompt on your Windows machine by pressing WinKey + R. Type “CMD” on the run line and press enter. Type “ipconfig” in the new window then press “Enter”. Take note of the IPv4 Address, Subnet Mask, and Default Gateway.

Enter that information on the IPC search program on your Zmodo app. Do this for every field except the IPv4 address. Enter the IP address as is but label the last three digits to a larger value such as 101.

This change in network settings should allow you to open Zmodo on your Internet Explorer or similar browser.

How to turn on/off Zmodo camera?

You can unplug the Zmodo cam to turn it off. You can also go to the device settings to select “Camera Schedule”. This feature schedules when to turn the camera on or off. Tap the pencil icon on the upper right of the “Camera Schedule” screen then tap “x” to remove a period you wish the camera is off.

How to share Zmodo camera?

Enter the “People” feature on your Home Screen then press the plus icon on the upper right-hand corner to add a new friend. Go to the “Device Settings” by tapping the settings gear icon then select “Sharing Management”.

Select which friends you’d like to share the device with. The friends should have their own respective Zmodo accounts, naturally. This gives them permission to access your camera and sew what it’s seeing like you would.

They can respond to your invitation to use your shared camera by agreeing or ignoring the invite.

How to update Zmodo camera?

To manually update your firmware for Zmodo, launch the Zmodo app first. Select the device you wish to update manually on the app’s Device List. View the settings menu by pressing the settings gear. Press Expanded Menu then access the General Info.

The Device Version tab should say “New Version Available” or “New Firmware Available” if the firmware has released any updates. Click on that then press “Update” to get the update going.

How to reset Zmodo camera?

You can power cycle Zmodo by unplugging it for a few seconds and then plugging it back again. The Zmodo Pivot requires you to press and hold the Touch Pad for 5 to 10 seconds to induce a reset. Once a successful reset is done, the device should reboot and the status light should blink green.

How to factory reset Zmodo camera?

Use a pin or paper clip to press and hold the reset button for 10 to 15 seconds until the device turns off to reset it to factory settings. The reset button type of reset typically restores the Zmodo camera to its original factory settings. This means you have to set it up once more and reenter its information.

FAQs – Frequently Asked Questions

Here are the most frequently asked questions about Zmodo cameras.

How to find the Zmodo camera IP address?

Double-click your IP camera in the IPC Search Program then change the network settings. Enter the info you got on your “ipconfig” results (IPv4 Address, Subnet Mask, and Default Gateway) their respective fields except on the IP field.

You’re supposed to assign the IP address as the same one that appeared as the IPv4 Address on your “ipconfig” results, but label the last three digits to a larger value such as 101. This will allow you to open Zmodo on Internet Explorer.

How do you find the QR code on a Zmodo camera?

Your phone should first connect to the Wi-Fi network you want your cams to connect to. Open the Zmodo app, press the plus sign on the top right then select “QR Code”.

Tap “Start Installation or Next” at the bottom of the screen. Enter your Wi-Fi password and tap “Next”. This will bring up the QR code on the screen.

Why won’t my Zmodo camera connect?

A host of reasons are behind why the Zmodo cam won’t connect to your Wi-Fi. Your Internet might be down or your cam is out of coverage area of the Wi-Fi router. Your router settings might interfere with connection (parental controls or VPN). Or your cam’s battery might be low.

How do I set up my Zmodo outdoor camera?

How to Set Up Your Zmodo Wireless Security Camera System

Where is QR code on Zmodo camera?

2 1 Log in and press the Add Device option in the upper right corner of the Home Page. + 3 Select the “QR Code” connection method to connect your device(s). Your device(s) will be added to your Zmodo account. Enter the password of the WiFi that you want your device(s) to connect to.

Do you have to pay monthly for Zmodo?

All of Zmodo’s products can be self-monitored, which means you don’t need to take on monthly subscription costs. Storing your videos to the cloud is completely optional, so you can own Zmodo cameras without paying any more than the price of the equipment.

How do I setup my Zmodo wireless camera?

Zmodo Zink Connection Guide Setup Tutorial

How do I connect my Zmodo camera to a different WiFi?

To move your camera to a different Wi-Fi network:

Plug your camera into a power source in the new location, launch the MeShare app from your smartphone, and login with your existing username. Add the device again using the same setup process as before, but inputting the new network name and password.

Why is my Zmodo not working?

Zmodo Support – [Troubleshooting] My Zmodo device isn’t working after the app update. Once you have updated your app, you may need to update your Zmodo device to a new firmware (if available). The app will prompt you when a firmware update is available.

Why wont my Zmodo connect to WiFi?

Your Zmodo camera can’t connect to the Internet

You need to check your WiFi router. If the Zmodo camera doesn’t connect to the wi-fi router, there’s no way you can have access to the video stream through the Internet, so you need to make sure the camera can associate itself with your router.

Why is my Zmodo camera flashing green?

If your Zmodo doorbell is blinking green, it means that your doorbell is ready for setup. During this phase, it will not send your phone notifications or record footage. You can install your device by using the SmartLink app. Here, you can connect your device to the internet and view footage.

Can you use Zmodo without subscription?

You can use Zmodo products without being required to pay a subscription. However, if you would like to use cloud storage to keep recordings and access specific features like editing clips and enabling AI object detection, you will need the subscription.

How many cameras can I have on Zmodo?

Yes, you can have as many cameras as you’d like. They will all be accessible by the same account if you choose to add them under the same account. They can be set up in as many locations as you wish.

Do Zmodo cameras have audio?

Most of the security cameras we test out these days have two-way audio, enabled by built-in speakers and microphones, and Zmodo’s cameras were no exception, save for the 1080p HD Indoor/ Outdoor WiFi Camera, the 720p Indoor Dome Camera and the Torch 360.

How do I watch my Zmodo camera on my TV?

How to use your Zmodo camera with Amazon Alexa and FireTV

How do I reset my Zmodo mini camera?

On some cameras like the Pivot, you can reset the Zmodo device by pressing and holding the Touch Pad for 5-10 seconds. Once the camera has successfully reset, it will reboot and the status indicator will blink green.

How do I connect my Zmodo camera to my computer?

How to View Your Zmodo Cameras on a Computer

What is this SSID?

The abbreviation SSID stands for Service Set Identifier. This is the unique name that identifies a wireless network. It is in the packet header when a data packet is transmitted. The devices on the Wi-Fi network use this identifier for communications via the network.

Can not connect to Zmd_sap?

Try the steps below to resolve the issue. – Go back to the WiFi settings, verify you are still connected to the ZMD_SAP network. – In the phone’s settings, temporarily turn off mobile data until the setup is complete. – Reboot the phone.

Why is my Zmodo camera flashing blue?

Note: Check the status/indicator light on the camera/s, when it’s blinking blue, the Zmodo device is connecting to a WiFi network. When it’s Solid Blue, the zmodo device is successfully connected. Your app should ask you to Name the device.

Where is the reset button on my Zmodo camera?

Please reset your device by pressing and holding the reset pin on the bottom of the Greet until the LED ring turns off. Wait for it to power back on, and retry the setup process once the LED ring is blinking green.

Can I use Zmodo camera without WiFi?

In order to allow you to access live video at any time and receive live motion detection and sound alerts, the Mini Cam communicates with cloud servers constantly. As a result, you will need a strong wireless signal where you install the Mini Cam.

What does a green light on a camera mean?

A solid green light on a security camera means there is both a local network and an internet connection.

How do I get my Zmodo camera back online?

Simply unplug the camera and move it to the new location.

As long as you are within range of your wireless router, your camera will automatically reconnect.

Conclusion

Hopefully, you’ve learned a thing or two on how to setup the Zmodo camera or camera ecosystem. This guide not only covered how to install and setup the Zmodo camera as well as how to connect it to your Wi-Fi, TV, and iPhone.

It also covers info on how to turn the camera on or off, how to update its software, how to reset it, and how to factory reset it when push comes to shove.

How to reset zmodo camera

Everyone wants a home that is safe and secure for the whole family. With a Zmodo camera, anyone can enjoy the comforts of their home 24/7.

Zmodo is one of the leading companies that focus on video surveillance. With their indoor cameras, outdoor cameras, video doorbells, smart hub repeater, and door/window sensors, anyone can make a  video surveillance system on their own!

As a matter of fact, there are several versions of Zmodo cameras that may provide various ways of being reset. If you’re interested, just keep reading!

Why reset?

Restarting your device is not the best option to combat certain problems such as problems on WiFi connectivity, however, resetting your device to factory default is.  By doing so, you are resetting your device’s settings as well as the options, putting it back on default and setting it again.

Some issues can affect your device options that can result in a tech problem, resetting your device can help fix the problem. But the cons is that you need to set it up once again.

Restart vs Reset

Again, restarting just turns off your device and then reboots it. The settings that you have set are still there and there is no need to set it up again.

While a device factory reset will put your settings back to default and will remove all your personal touches on the device.

Reset a wireless camera

1. Turn off the network camera by disconnecting the power adapter.
2. Press and hold the reset button with a pointed object while reconnecting the power.
3. Continue pressing the reset button just enough until the status indicator blinks. Then proceed to release the reset button.

A wireless camera

Reset a Zmodo camera to factory settings

1. Press and hold the reset button at the side of the blink module for at least 10-15 seconds.
2. Keep it pressed until the light turns red.
3. Solid green and blue light will appear once the reset is done.

NVR and IP Cameras

#1: Keep the reset button at the back of the NVR to set everything back to defaults.

#2: Use the restore to defaults in the settings menu.

1. Proceed to the main menu and select General Settings.
2. On the left side list, select the bottom option that states default.  The NVR will ask if you are sure to restore to default. Just select OK to restore the settings.
3. You will need to put the admin password for the system and click Enter.
4. The system will be set to default after the process is completed.

NVR and IP Cameras

CM-I11123BK and CM-I12316GY

The reset for the CM-I11123BK is a bit different from CM-I12316GY.

CM-I11123BK

1. Turn the camera upside down and find the reset button on the bottom.
2. Keep the button pressed for 15 seconds.

CM-I12316GY – 2 variations

1. There are 4 cables on the lead that are for power, ethernet, and two other wires.  To reset the version, keep the two other wires pressed together for 15 seconds.
2. There are three cables on the lead.  For power, ethernet and another cable with a button.
3. To reset, hold the button on the cable for 15 seconds.

If the cameras can still be accessed on Internet Explorer, the reset can be done with the settings menu and selecting Restore Factory Settings.

Zmodo Doorbell

1. Remove the device on the wall.
2. Face the camera upward.
3. Find the pinhole at the bottom.
4. Take a pointed object and press the hole with it.
5. When the blinking green light starts, the reset is completed..

Zmodo Pivot

1. Find the touchpad
2. Keep the touchpad pressed for 10 seconds.
3. Wait for the green blink.

Effects of factory reset

Resetting is like receiving a new device with unmodified settings, just what it was when you bought it in the store.

The camera will forget all the WiFi that it has been connected to and you will need to reconnect everything to the application.  The videos will be all reset not unless you put them in a different memory device.

If you’re trying to resolve problems on your device that can’t be solved with restarting, you may want to save all your video files and then proceed to reset the device.

The Bottom Line

Resetting is quite easy with Zmodo. It depends upon the version but everything is easy and convenient for every user.

Please take note that by resetting, everything will be back to its original state and you may not recognize it and you may want to personalize everything. Just input your preferences and settings again.

Zmodo Camera Troubleshooting

What is the Zmodo Cam? How do you go about troubleshooting it? What are its typical problems? Keep on reading to find out the truth about Zmodo cameras and fixing their most common issues.

Zmodo is a global provider of smart security camera systems. They sell quality smart devices for surveillance and protection purposes that could be used indoors or outdoors. Its site also serves as your one-stop shop for smart home cams that provide a safe digital surveillance ecosystem.

Every Zmodo cam networks with one another and they also work together in a single app, like in the case of Zmodo’s competition Ring, Arlo, Wyze, Blink, and Nest. With that in mind, let’s discuss Zmodo camera troubleshooting 101.

Zmodo camera offline: How to get Zmodo camera back online

If your Zmodo camera is offline, check to see if it’s a Wi-Fi issue on your ISP’s end or if it’s a connectivity issue on the Zmodo cam’s end. You might have a Wi-Fi disconnection issue or a network that’s so slow you couldn’t do the usual things you could with your cam.

If your Zmodo cam is offline check your Wi-Fi router first to see if the ISP is the root of the problem. The reasons for an offline camera include the following:

• Not in Range: The camera might be outside the coverage area of the network. To fix this issue, you’ll have to place the camera and/or the Wi-Fi modem closer to each other.
• ISP Issue: It’s not Zmodo it’s you. Or rather, it’s your Internet Service Provider. Make sure your ISP is working properly with all the lights for Internet connectivity turned on.
• Network Connection: If your network connection itself is poor and unstable, do two things. One, power-cycle (turn on and off then on again) your router. Two, reset or unplug then replug your camera.
• Wrong Network Name: The cam might connect to the wrong network name instead of your home Wi-Fi. Fix this during setup or release the Wi-Fi then reconnect to the correct Wi-Fi.
• Wait a Little While: If you’ve just switched on the camera then wait a little while for it to get connected to your network of choice. Patience is a virtue here.
• Network Compatibility: Some models work within a limited frequency—2.4GHz instead of 5GHz. Your cam might not connect to a 5G network, in other words.
• When All Else Fails: When all else fails, just reset your Zmodo camera to factory settings. Take note though that some cameras don’t have a reset button so you’re left with turning it off and on to reboot it.

Zmodo camera not working: How to Fix

If your Zmodo cam isn’t working after the app update then you might need to update your Zmodo cam’s firmware for good measure (if it’s available). Update the app first then get the app to prompt you when a firmware update is available in turn.

If your Zmodo cam is offline then you can bring it back online using the recommendations of the section above.

If the Zmodo cam isn’t powering on at all despite the battery being fully charged then the appliance itself might already be “bricked” (it’s not working and it’s no better than a paper weight or brick). Contract Zmodo support for more details.

Zmodo camera not connecting to Wi-Fi: How to Fix

If it’s a connection problem, troubleshooting can be done if it’s the camera causing the disconnection. Do the following:

• Check if your ISP’s Internet is working properly.
• Charge the battery of the camera because the battery power might be low.
• Setup the camera to connect to the Wi-Fi once more.
• Check the settings of your router.
• The parent control or VPN on the Wi-Fi can cause offline issues with the camera. Turn them off for a few seconds to see if it solves the issue.
• Access your wireless settings on the app.
  • Look for the wireless settings menu.
  • Find the wireless signal name or SSID.
  • Rename the SSID for 2.4GHz and 5GHz (different names for both).
  • Open the security tab to make sure the router is using WPA or WPA2
  • Save your settings and try reconnecting now.
• Remember that WPA/WPA2 has a password limitation of 13 characters.

Zmodo QR Code not working: How to Fix

Make sure the Wi-Fi network you’re connecting to is 2.4GHz WPA-PSK/WPA2-PSK. Also, the network shouldn’t be hidden either.

When doing the QR code scan, ensure that the display on your phone is set on high brightness. Also, avoid getting glare on the screen. Furthermore, make sure your camera isn’t already bound to another user account. This might make the QR code scan moot.

Zmodo not connecting to zmd_sap: what is zmd_sap? How to Fix!

The zmd_sap or ZMD-SAP is the wireless network that Zmodo cameras connect to that’s exclusive to the Zmodo wireless camera line. NVRs and DVRs don’t make use of the network, only the wireless cams do.

If your Zmodo isn’t connecting to zmd_sap, do the following.  When the camera is blinking green, check the available Wi-Fi signals on your phone’s Wi-Fi settings page. You should see the ZMD_SAP network on the list. Use the Zink connection to connect the device to the Wi-Fi network.

If you can’t find zmd_sap, connect to Zmodo’s chat and speak to one of their agents. They should provide you with a QR code to do the setup. No amount of resets is going to fix the issue of a missing zmd_sap. Refer to your product’s Quick Guide for more details.

Zmodo camera red light: Here’s The Truth!

On many Zmodo cameras, the presence of the red light means there’s some sort of error occurring. Some indicate an issue reading your hard drive. Or it might mean you can’t connect to your ISP’s Wi-Fi Internet or any local wireless connections (like the zmd_sap network).

On the Zmodo HD WiFi Camera NVR Kit, a solid red light means the hard drive isn’t working properly or no hard drive was detected. If the light is flashing red instead this means the NVR has encountered an error. You should restart the NVR. Contact Zmodo support if the problem persists after the restart.

Zmodo camera blue light: Here’s The Truth!

In most models of the Zmodo camera, a solid blue status light means the device, is already connected to the Wi-Fi network. In other words, a blue light usually means good or benign things unless otherwise stated.

With the Zmodo NVR, a flashing blue light means that the NVR camera is reading the hard drive. As for the Zmodo Pivot, a solid blue light means it’s ready to go and connected to Wi-Fi while a flashing blue light means it’s attempting to connect to Wi-Fi.

FAQs – Frequently Asked Questions

Here are the most frequently asked questions (FAQs) regarding how to fix your malfunctioning Zmodo camera.

Where is the reset button on the Zmodo camera?

Most Zmodo wireless cams lack a reset button. The ones that do have a small reset button you need a pin or paper clip to press and hold. The reset button could be found on the underside of the camera in question. Read the user manual for more details.

How to setup Zmodo camera?

To use Zink, download the app and make a free account. Open the (+) Add Device menu and start the setup process, connect your phone to your Wi-Fi device, enter your Wi-Fi info, and name your device.

With SmartLink, it’s the same deal. This should work on Beam, NVR Kits with Wi-Fi Cameras, Wi-Fi Camera Kits, PT Cameras, Mini Wi-Fi Camera, Greet, and Pivot.

How to reset Zmodo camera?

Use a pin or paper clip to press and hold the reset button for 10 to 15 seconds until the device turns off to reset it to factory settings.

The Zmodo Pivot requires you to press and hold the Touch Pad for 5 to 10 seconds to induce a reset. Once a successful reset is done, the device should reboot and the status light should blink green.

How do I connect my Zmodo to Wi-Fi?

Once you’re prompted to connect to Wi-Fi, you should press “Tap Here to Select Wi-Fi” to go to your smartphone’s Wi-Fi settings page. Afterwards, select your Wi-Fi and provide the username and password.

If you’re connecting to Beam, connect to the “AP_ZMD” SSID. If you’re connecting to any other “Zink” Wi-Fi device, connect to “ZMD_SAP” SSID instead.

Zmodo camera light meaning?

The meaning of each camera light will depend on the model of Zmodo you have on hand. Here are the meanings behind the colors of the Zmodo Pivot, for example.

• Solid Blue: Ready to go and connected to Wi-Fi.
• Flashing Blue: Attempting to connect to Wi-Fi.
• Solid Green: The Pivot is rebooting.
• Flashing Green: The Pivot is ready and waiting to connect to Wi-Fi.
• Off or Gray: The Pivot is turned off or unplugged.

How do I reset my Zmodo camera?

On some cameras like the Pivot, you can reset the Zmodo device by pressing and holding the Touch Pad for 5-10 seconds. Once the camera has successfully reset, it will reboot and the status indicator will blink green.

How do I get my Zmodo camera back online?

Simply unplug the camera and move it to the new location.

As long as you are within range of your wireless router, your camera will automatically reconnect.

Why won’t my Zmodo cameras connect?

If you have a Zmodo camera that won’t connect to Wi-Fi there’s a quick fix. Usually the issue with Internet connection is related to the frequency the camera is operating at. When your router works at 2.4Ghz and 5Ghz, the Zmodo camera can associate itself to the wrong SSID (wireless signal name).

Why does my Zmodo camera keep going offline?

If the zmodo camera is showing offline, then the wireless network router is required to be checked. Sometimes, the model of the camera differs and according to the model, the camera can work within a limited frequency. That’s why the camera is not able to connect with the wireless network router.

What do the lights mean on a Zmodo camera?

Note: Check the status/indicator light on the camera/s, when it’s blinking blue, the Zmodo device is connecting to a WiFi network. When it’s Solid Blue, the zmodo device is successfully connected. Your app should ask you to Name the device.

Why is my Zmodo camera flashing green?

If your Zmodo doorbell is blinking green, it means that your doorbell is ready for setup. During this phase, it will not send your phone notifications or record footage. You can install your device by using the SmartLink app.

How do I reconnect my Zmodo camera to WiFi?

Open the Add Device “+” menu on the upper right-hand corner and select the ‘Zink’ setup method. If you do not have a Beam already, select the ‘Normal’ setup option. 4) Connect to your phone to your WiFi device’s wireless signal. Your will be prompted to connect to your device’s WiFi signal.

Why is my Zmodo camera blinking green and blue?

That is usually indicative of a power issue as the camera is not able to go to setup mode (blinking green) and is not connected (solid blue). 1. Please try unplugging and replugging the camera, and make sure it’s plugged directly into a wall outlet and not to a power strip or extension cord.

What does it mean when a security camera is flashing red?

Usually, when you see a blinking red light on a security camera, that means that the camera is fake. Many businesses or homes choose to purchase fake security cameras because they cannot afford a real one or do not want to handle the maintenance costs.

Where is QR code on Zmodo camera?

Procedure

1. Press the plus sign on the top right and select QR Code.
2. Tap the “Start Installation or Next” at the bottom of the screen then tap on “Next” till you get to the screen asking for your password.
3. Once it is asking you to enter the password confirm the wifi network at the bottom is the 2.4 network.

Conclusion

Check out the Zmodo smart home devices and security cam systems in case their prices and services cater more to your budget. Hopefully, this guide has outlined everything you need to know about fixing smart device errors and connection problems.

Even Zmodo cams require maintenance, servicing, and troubleshooting from time to time. No matter how high-quality the cam is, errors and glitches do happen. Hopefully, this guide will keep your Zmodo ecosystem running smoothly when push comes to shove.

References

1. “Fix Zmodo camera offline“, TechFixYa.com, Retrieved March 11, 2022
2. “Welcome to Zmodo Support“, Zmodo.com, Retrieved March 11, 2022
3. “Configuring your wireless device“, Zmodo.com Support, May 17, 2018
4. “How can I reset my device?“, Zmodo.com User FAQ, Retrieved March 11, 2022
5. Patricia P., “What does the ring on the top of the Pivot mean?” Zmodo.com, January 27, 2016
6. “Zmodo won’t connect to WiFi (solved)“, LearnCCTV.com, Retrieved March 11, 2022
7. “Zmodo HD WiFi Camera NVR Kit Quick Start Guide“, Zmodo.com Support (NVR Quick Guide PDF), Retrieved March 11, 2022

<p>The post How to Setup and Use Zmodo Camera? first appeared on NVR IPCAMERA SECURITY.</p>

How to connect a Uniview Cube camera to wifi using a PC

<p>The post Advanced Uniview IP Camera Guide first appeared on NVR IPCAMERA SECURITY.</p>

For version : 3.0.3.0 if it doesn’t notice the password is incorrect , pls make sure you used the wired mouse, due to 3.0.3.0 version doesn’t support wireless mouse.

Note:User name and password should not exceed 8 characters and should not contain such as &*! @ (… #% and other special characters

You can refer to our YouTube channel videos : https://youtu.be/KJpJnYFlGK8

1) Within the black area, Click the left mouse button>right mouse button>left click>right click… Lasts 6 times

 

2) Yes

 

3) Input your new password,The old password is empty,you don’t need enter anything.

HiSeeu Wireless Camera System installation guide

Read Next : Hisilicon IP Camera Firmware Update

 

4) OK

 

 5) If this step still not work, please email Johnny@hiseeu.com with below screenshot of your NVR, then they will send you the super password to login

 

How to solve the problem of camera connect failed?

Please follow these steps to troubleshoot

Please check if the white antenna on the camera is loose first.

1)Cover the sensor under lens on the camera to see if the light is lit or not.

If it’s bright, it means camera is not bad.

If it’s not lit,You can connect the power of a good camera to the bad camera.

 

In the case of determining that camera is not broken.

2）right-click the mouse> video manage> Refresh / Search

3) if your camera with reset button, no LAN port, please take camera close to your NVR

1. delete the connect failed channel

2. press the reset button on camera for 10 seconds

3.Right click the mouse again > wireless add > wait the screen show a new camera IP address 172.20.14.**

4. if no IP address, pls reset camera for several times,

After adding the camera successfully, you can exit the add camera interface

below is the video for you check :https://youtu.be/Kaxvth-sd-Y

4) if your camera with Lan port

Pls use an Ethernet cable connect the camera to your NVR.

Delete the connect failed Channel>Refresh(Search) find IP address 192.168.**.**>Match Code(wait for IP address change to 172.20.14.**)

After that you can unplug the Ethernet cable.

You can refer to this youtube video.

https://youtu.be/kmNnFgjLiPI

HDD not fund / Not record anything

 Please refer to these below to solve the HDD not fund issue.

1）Check the power adapter connected to the NVR box. The NVR box uses 12V 2A or 12V 3A power supply. If you connect the 12V 1A cameras’ power supply to the NVR, the NVR box will not provide enough power to drive the hard drive.

2) If hard drive is preinstalled, there are 4 screws at the bottom of NVR box.

3）Check Hard Drive Information on NVR box and Format it

Right click the mouse>system setup>General setup>HDD setup>select the hard disk>Click Format, if the progress bar always shows a few percent or the formatting is failed, please contact with us.

 

 

4) Please open the NVR with a screwdriver, check the two cables connecting the hard drive and see if they are loose.

 

5）Take the hard disk out and install it on your computer. Check if the computer can recognize the hard disk. This is to confrim the HDD is the problem or not.

How to solve Gateway Unreachable or Network Error

If you click “fast network” to appear: Gateway Unreachable or Network Error , pls fellow below steps:

Step 1:

1) you must check if the network line is faulty or not: check whether the switch and router line connection are correct.

2) Can you connect to the external network normally through the computer wired connection?

Notice: Do not directly connect the recorder to the fiber

 

Step 2: Right click mouse and choose Fast Network —-> Auto config ,check if the network will be healthy or not

 

Step 3: If the auto config still can’t make it work , pls kindly check the same network computer network setting

Then “manual configuration” set the recorder network settings, don’t choose DHCP, input the same IP address and gateway and submask same as your computer

Offline

1)Pls Connect NVR to your router with an Ethernet cable. After that right click the mouse > Fast network.

 

2)If Step 1 doesn’t work, Maybe the Ethernet cable is damaged. Please replace it with a new one

3)If there is no problem with the cable.

Pls right click the mouse> system setup >Network setup>Do not choose DHCP>Change DNS to 114.114.114.114 or 8.8.8.8 > Power off the NVR and power on again(Reboot the NVR)

4)You can also connect the NVR to your home WiFi,

Enter the wireless internet interface > Select your home WiFi and enter your password > Apply

Change the display channel of the camera

When you select the corresponding channel, you can click the two buttons on the left, and then move the channel

You can also drag the image directly to another channel

How to set up Motion Detection？

1)Enable Motion Detectin on NVR Monitor

Pls right click the mouse>system setup>Channel Setup>Video detection>Selecting the Channel for Motion Detection>Choose the form of alarm>After you set it up you can Click “Copy to” to set to all channel

 

2) Set the area of motion detection to be set within the field of view of the camera.

 

3)App Alarm

a)Select App Alarm on NVR

b)Click three dot> Alarm push

 

c)Click System authority settings, turn on all permission of the app.

 

How can I view the camera remotely?

There are four methods to view the camera system remotely. Please refer to these step below.

 

1) First you need to connect the NVR with your router by wired or WiFi

Wired connection

1. wired connection, connect the NVR with router by ethernet cable

2. right click your NVR mouse choose fast network, then click auto config, check cloud ID status is online and network is healthy, then you can remotely check the system on your phone app

3. if not online and healthy network, please click manual configure, and check your router detail,

make sure the NVR and your router is the same IP gateway, IP address the first 3 number should be the same, the last one can’t be the same ,. preferred DNS please change to 8.8.8.8 and apply it

WiFi connection

1. please notes our NVR only can work with 2.4Ghz wifi network,

2. right click your NVR mouse choose system setup–network setup–wireless internet –enable wireless LAN, then find your house wifi name, input password, apply it

（please note the wifi name can not included any special character ,such as “_”, otherwise it will show connected failed.）

3. check the status is connect failed or success, if it is failed, please click view details,

check the same wifi network details on your phone and your NVR, then change them to the same IP gateway, IP address the first 3 number should be the same, the last one can’t be the same ,. preferred DNS please change to 8.8.8.8 and apply it

https://www.hiseeu.com/a/help/article/27632

2）To view on the Phone

a) Setup NVR box

Please reset your password：right click mouse>system setup>system admin>user>setuppassword>change a new password(Password must be within 8 characters)

b) Setup Mobile Phone

Scan below code download “Eseecloud”

 

 

c) Click “+”–“other way to add/scan the QR code on your NVR fast network page “–input cloud ID user name is admin and password is the one you login in NVR (If you doesn’t change the user name and password, User Name is admin password is the one you set for the NVR before), if your forget the password please refer this step: https://www.hiseeu.com/a/help/article/27650

(Cloud ID is in the lower right corner of the screen or right click your NVR mouse and choose fast network to find Cloud ID)

 

 

Scan the QR code on display

 

The user name is admin, enter the password of your camera system in the password field

 

3）To view via Eseecloud software on PC

EseeCloud for Windows PC

Eseecloud MAC: http://download.dvr163.com/tool/EseeCloud-mac-2.0.8_20200228.zip

Eseecloud Windows: http://download.dvr163.com/tool/eseecloud/EseeCloud_Setup_3.0.7.10.exe

here is the video to check how to add it : https://youtu.be/0AX1-sMKJG4

If you have registered your eseecloud account on your mobile phone, you can directly log in with your eseecloud account on the computer, and the account information will be automatically synchronized to the PC software

 

Double Click Cloud ID

 

How to remove the red triangle mark

For the red triangle mark it is for notice you something happened for your camera

such as the motion detection , video loss, HDD not found,

for remove the triangle

1. you need upgrade your NVR version to 3.0.5.0

there are 2 ways to upgrade

1) online upgrade, connect the NVR with router by LAN cable , right click your NVR mouse and choose system setup–system admin–system upgrade–online upgrade

2) offline upgrade, you need copy the firmware to the USB disk and choose local upgrade the firmware you cane email Johnny@hiseeu.com to get it

3) after you upgrade successfully, pls right click your NVR mouse and choose system setup–general setup–error setup–disable alarm icon.

Connect the camera to WiFi, then add it to NVR

You can connect the camera to your home wif and then add it to NVR.

First you need to press the reset button for 6s on the camera to reset the camera,

1) Please refer to pages 4 to 6 of the manual in the attachment to connect the camera directly to your mobile app,

 

 

 

 

２）First, you need to connect NVR to your router,

Then search the NVR for the camera connected to WiFi

Right Click the mouse > Video manage > Change the “protocol” to “onvif” > Search > Add one

 

if it show Password Error, please go to your phone app , click “…”–“Edit” then on blank place quickly click 6 time you will see cameras password here, go back to NVR video manage page, select the correct channel, click Manual Edit to input camera password .

What to do when the screen color is not displayed correctly

1） Click the mouse to select the screen –> click the 3rd icon (color adjust)

2) Click Default button–>select Ircut mode–>Ok

If it doesn’t solve your problem ,pls send this screenshot to us

Audio function！

1:Please check if there is a microphone hole on the back of the camera.

 

 

2:When you want to use the audio function of the camera, you need to turn on the audio function of the camera:(left click your mouse on the camera images)

3: right click your mouse — turn up the volume

4: Also turn on the audio button on App

 

 

if your version is 3.0 ,you should choose the AV stream also,refer these step

right-click the mouse ->System Setup->Channel Setup ->Encode Setup ->Select orresponding Channel(1-8) ->change the Encode Mode to AV Stream -> Apply

 

5: Every camera supports audio, but you can only use the audio of one camera at the same time.

and if the NVR your had order is with monitor, pls plug in your headphones or stereos behind the NVR

 

Why can’t remotely check the playback and change the setting

pls fellow below step

right click your mouse and choose system setup –system admin–user–edit user– choose remote and config and playback

How to solve the problem of camera lost connect with NVR, need reboot the camera to fix this problem?

Firmware 1: https://www.dropbox.com/s/qlyr53xfsrjscox/%E9%87%8D%E5%90%AF%E7%9B%B8%E6%9C%BA%E5%9B%BA%E4%BB%B6.rar?dl=0

 

IPCAKV3W_20220415_3_6_82_572011

IPCAKV3W_20220415_3_6_82_572011

(Fix the camera lost connection with NVR need unplug camera power cable)

Firmware 2: https://www.dropbox.com/s/mrdzs1ioqhmuuve/%E4%B9%9D%E5%AE%89%E5%8D%95%E6%9C%BA%E4%BF%A1%E5%8F%B7%E4%BC%98%E5%8C%96%E5%9B%BA%E4%BB%B6.rar?dl=0

 

IPCAKV3C_20220415_3_6_82_572010

IPCAKV3W_20220415_3_6_82_572011

(Fix camera signal problem)

 

572010 for the camera model: 5322-W

572011 for the camera model: 5323-W

please go to video manage page to confirm the camera model.

 

To upgrade the camera firmware: download the firmware from the dropbox, unzip the file at first, copy the correct file to your USB DISK root, format should be FAT32,go to system setup–channel setup—IPC upgrade page–click the correct channel–click start–remove mouse –insert USB disk–wait for camera upgrade successfully

I’ve connected everything, but the display doesn’t show images

Pls Refer to the following steps

1）Press the left mouse button for 30 seconds and the camera system will reboot.

2）A)You need use a VGA cable to connect the NVR to the monitor.

B)If you don’t have a VGA cable but have another monitor, you can connect the camera system to another monitor.

3）Then change the output resolution of NVR.(Right click the mouse>system setup>General setup>Screen setup>Output resolution)

Set an appropriate resolution and switch back to the original HDMI Cable.

4）If the display is still not displayed, you can choose another resolution.

if your NVR box version is 3.03.0 pls change the step 2 as below：

2) Then change the output resolution of NVR.(Right click the mouse>system setup>General setup>Display Resolution)

If camera often loses signal with NVR？

You can use the following four methods to solve the problem of poor camera signal

Please check if the white antenna on the camera is loose first.

1)First, you can change the wireless channel of the camera system to ‘other’, and the antenna of NVR is better to stand up

Right click > system setup > Network setup > change Wireless channel to “other” > Apply

Then restart the NVR, unplug the power supply of the NVR and plug it in again

2）You can replace the white antenna on the camera with the black extension antenna in the package, so that the black extension antenna passes through the wall.

 

Place the camera next to the NVR to ensure that there is a good signal between the camera and the NVR.

3）You can set a camera as a WiFi repeater to enhance the signal between the camera and the NVR.

4）You can also buy a WIFI repeater, which also enhances the signal between the camera and the NVR.

for Wifi repeater you can search: B07NRBYM5C on amazon.

If you can write a good rating to our camera system,We can send you one for no charge.

(warm notes:if your version is 3.0,there is “Search”button but not “refresh” ,click the “search” but the “refresh”)

(version 3.0)

How to use the wifi repeater to enhance signal

 

When the repeater is powered on, its indicator lights up.

Press the reset key for 10 seconds and it will deletes all previous matching records

How to use it on NVR.

1)Connect the repeater to NVR by Ethernet cable

2)click “Search” and then there will disappare a device which IP address is “192.xx.xx.xx”

Click it, it will pop up a new window

click Match button to let the status become “wireless has been matched”

 

At this point, you can unplug the Ethernet cable.

4) back to the Video Manage interface and click the Repeater .it will show the same window as the figure below.

click the add icon after the Router button,then select chanal which you want to enhance sigal

How to add an extra camera?

when you receive the new camera , there is no match between the nvr box and the new camera. You need to pair them.

if your camera with reset botton , no Ethernet port,

1)right click your NVR mouse and choose wireless add

2)press the camera reset botton for 10 seconds

3)wait it shows camera IP address 172.20.14.**

4)if no IP address, pls reset camera for several times, then you can exit,

below is the video for you check

https://youtu.be/Kaxvth-sd-Y

 

if your camera with Ethernet port, You can refer to our video on Youtube.

https://youtu.be/kmNnFgjLiPI

1) You need to connect the camera and the NVR box with the Ethernet cable.

2)Right-clik the mouse video manage→Refresh/search( find camera IP address as 192.168.1.**)→Match code( wait camera IP address changed to 172.20.14.**) then exit and choose add one

After camera and NVR are paired, you can unplug the Ethernet Cable.

3) Use the same way to pair more camera.

How to solve “Resolution too big”?

Our system upgraded , the “Resolution too big” camera is 3MP, old system can’t work with 3MP camera

1. right click your NVR mouse choose system admin–system version to check NVR version is 2.8 version or 3.0 version

2. if it is 3.0 version, you can upgrade it to latest firmware then it can support 3MP cameras (3.0.6.0 version and above version)

how to upgrade to NVR?

1) Online upgrade : go to system admin-system upgrade-then click online upgrade, wait for it upgrade successfully, then camera will show image

2) Offline upgrade, please email Johnny@hiseeu.com with your system version page , then she can provide firmware to you

3. if it is 2.8 version,the only way can fix is to upgrade camera firmware

right click your NVR mouse–system setup–system admin–IPC maintance, then take a screenshot of camera version, email : johnny@hiseeu.com for resolution too big problem.

4. after you get the firmware, please copy to your USB DISK root, format should be FAT32,go to IPC maintance page–click the correct channel–click start–remove mouse –insert USB disk–wait for camera upgrade successfully

5. go to system setup–channel setup–encode setup–find correct channel–change resolution from 2304*1296 to 1920*1080.

How to Change the Display Position of Channel

There are 2 ways to changed the position of camera

 

1)Generally speaking, we will choose four channels to display at the same time on the screen

 

For convenience, let’s first choose to have all channels displayed on the screen.

right click your mouse — Split Screen — X8 View

 

Now we want to let the Channel 7 to the Channel 2 position

left click the mouse on the channel 7 screen and dont loose

then move to the channel 2 position ,loose the mouse left key

 

that is OK

2)Please wrote down the IP address of the camera (which you want to exchange it channel,such as channel 5). Then deleted the channel which you want that camera to place(such as channel 2), did a manual edit on channel 2 ,Enable it and change or add the IP address of channel 5 wrote down. Camera immediately came up on channel 2.

App wrong Password

Pls refer to these step to solve the wrong password issue. refer this video : http://youtu.be/bFVwGqnr2Js

1)If you doesn’t change the User Name and the Password on NVR box.

The User name is ‘admin’, no password (you needn’t input anything)

 

 

 

2)For change the password on NVR box.

Right click the mouse>system setup> system admin>User>set password

 

3)User name and password should not exceed 8 characters and should not contain such as &*! @ (… #% and other special characters (you can setup password: jasmi985/ jasmi996/ jasmi856 or others. )

If you can login NVR with a password, but can’t login on App, please confirm that the password within 8 characters

Note：App login username and password are different from the camera login username and password. They are two different sets of username and password system.

How to set up Email notification?

a. Enable POP/IMAP in your email. If default setting of your E-mail enables that, please skip this step.

Login your email via browsers; go to Settings – Forwarding and POP/IMAP-Enable POP and IMAP – Save Changes.

 

We also need to Allow 2-Step Verification for your Gmail account, login www.google.com

 

• Open your Google Account.
• Select Security.
• Under “Signing in to Google,” select 2-Step Verification and then Get started.
• Follow the on-screen steps.
• Normally after you set 2-step verification, you will create a new password on NVR password page you need input this password

b. Go to your system main menu. System setting- Channel setting- Video Detection. Enable E-mail Notification and click Copy to apply the same setting to other channels.

 

b. Go to your system main menu. System setting- Network setting- Email setting. You will see the interface shown below.

 

c. Follow the instruction below to input the information required to finish the setting.

 

Email Notificaion: Check “Enable”

SMPT Provider: Click the one you use in the selection. Or click USER CUSTOMIZE to use the E-mail server that is not in the selection.

Sender : Type in your sender email address

Password: the password of login your sender emial address

SMTP service: when you choose the correct SMTP provider, it will suggest correct service to you

Port: The default port is 25. If it doesn’t work, you can go to the link below to get the port of the e-mail you use.

https://www.arclab.com/en/kb/e … .html

Encryption Type: Select the one that your E-mail server works. If there is no selection, please choose None.

Sendee 1: the email you want to receive email alerts

Sendee 2: the second email you want to receive email alerts, you can leave it blank

 

d. Then click Test see if you can receive a test e-mail alerts from Esee. If yes, that means the setting has set successfully. Then, please click Apply to save the setting.

e. Latest APP allow to set email notification on the cellphone directly

Go to cellphoen app Eseecloud, click me–settings–mail to receive alert messages–enable it, then put your gmail address, to get verfication code, after you input verfication code click confirm, then you will get the email notification, thanks

 

 

 

 

 

How to setup Record Plan?

You can set up three modes of record plan

Note：After you have set up the record plan, you need to click “copy to” to apply the record plan to all channels.

1) Time Recording:

Setup period of time of recording on NVR,Right Click the mouse>System Setup>Record Setup>Record Plan.

Click Time and put mouse icon on the upper left corner(for example 1 as picture shows).press and drag the mouse to the right to choose the time.the list will turn to red.

2) Motion Recording:

Only detect motion and then start recording. Right click mouse>System Setup>Record Setup>Record Plan.

Click Motion and putr mouse icon on the upper left corner, press and drag the mouse to the right to choose the time. The list will turn to green.

3) Alarm Recording:

Riht click the mouse>System setup>Record Setup>Record Plan.

Click Alarm and put mouse icon on the upper left corner,Press and drag the mouse to the choose the time,The list will turn to yellow.

Note: Users can Setup any period of time they want, for example 0:00:00-23:59:59, That’s 24hrs*7days recording. When NVR detects hard disk, the default setting will be 24hrs*7days recording.

The priority of Alarm is higher than that of Motion, and the priority of Motion is higher than that of Time.

When you have set the corresponding record mode, you can click “select all”, and the time area below will become the corresponding color

Video Playback

Right clik the mouse>Video Playback>Choose date、Channel、record mode>Click Search>then can view playback file

Note：You can only watch four Channels recording at the same time.

1. IIIustration for playback button:

play,

pause:

fast forward*2,*4,*8；

2. Play file: Choose the recording file in file list,as number“1”shown in picture. Chooseone of the recording, click“play”to play to recording file;

3. Video backup: Choose the recording file in file list,as number“1”shown inpicture.insert the U flash disk, click“video backup”to backup the file;

4. Timeline: Click“date”and“time”at left bottom to check the timeline of recording, as number“2”shown in picture;

5. On the timeline with recording file,left click the mouse, the can playbackthe file.

How to watch the playback on my phone?

First ,you should install the Eseecloud on your phone ，if you hadn’t installed it ,refer this link:

http://www.hiseeu.com/news/wirelessskitfaq/69.html

click playback

then it will show the interface follow below

choose the time and channel which you want to watch

Notes: The default is no sound when you watch playback.so you should click this sound button to open it if you want to hear

How to backup the recording

There are 2 ways to make backup

1) use USB disk to backup

1. right click your mouse, and choose video backup.

2. choose the channel/date/time playback you need backup,

(If you copy too much backup, we suggest you copy it one by one channel to save copy time)

3.Backup, the let your mouse out and within 30 seconds put the USB to get the backup

if you need check tbe playback you copy out on computer, pls use VLC player , you can download here :

http://download.dvr163.com/tool/Video-player%20.zip

 

pls notes USB disk format should be FAT32 otherwise your NVR may can’t find it.

 

2) make backup on computer

 

1. download Eseecloud :

Eseecloud MAC: http://download.dvr163.com/tool/EseeCloud-mac-2.0.8_20200228.zip

Eseecloud Windows: http://download.dvr163.com/tool/eseecloud/EseeCloud_Setup_3.0.7.10.exe

 

2. add the system to your Eseecloud phone account, then on computer software choose login cloud(login with the phone app Eseecloud account and password)

 

3. search the cameras playback, and choose the channel you want to make playback and wait for it shows the recording

 

4. click the download icon the chose the files you want to download, wait for it finished the process, then you can open the it and check the playback on computer

 

here is the video for you check : https://youtu.be/kR7QN_2UKdI

Factory Setting

Pls refer to these step below to reset system

1)Right click the mouse>System setup>System admin>factory setting

*Note: pls don’t check “Channel setup”&”Screen setup”&”Digital Channel”

Click “Apply”

2)If you Check “All”

After NVR Reboot,you need Right click again>video manage>Double-click the IP address of camera (like 172.20.14.2)

If Your NVR box version is 3.0.3.0

Pls refer to below steps

Right click the mouse>System setup>System admin>factory setting>simple restore

The standalone camera connection step

pls connect it step by step , if you fail , pls send us some screenshot and tell us which step is wrong by email or whatsApp

our email is :johnny@hiseeu.com

Wechat/WhatsApp:+86 13392810296

Skype:Johnny.chen1204

1) download “Eseecloud” app on your phone and register it

click add button and choose Standalone camera

 

2)check if the camera light lit

click this button

3) Point the camera of the mobile phone at the QR code of the camera

4）Choose a network environment for your camera, the WiFi name

5）input the wifi password and click the connecting device button

6) Wait a minute and it will connect succeed click COMPLETE button

7)edit the camera name and set its password(password can be empty )

that is finished! if you want change some camera information such as password, you can click setup button to set it

Here is video for you check how to connect it on phone app : https://youtu.be/tNKeWUfe-mI

How to fix there is no cloud ID

1. Connect the recorder to the same LAN as the computer ：connect to the router

2. Provide the IP address of the recorder, System Settings – Network Setup Photo

 

 

3. Recorder switching debugging mode: system setting – system management – system maintenance, right mouse click, pop-up dialog box, click the left mouse button in the blank space of this pop-up dialog box, right click, click the left and right button, 12 times, Find out if the font prompt toggles the debug version, click Yes, OK. Go back to the lower left corner of the main interface with a red font. Take a photo to us (2.8 version)

 4. Provide remote tool ID and password, manufacturer technology remote connection control and send the email to us

if you don’t have the remotely tool, you can send the email to us, so we can send to you

(3.0.3.0 version)

3.Recorder switching debugging mode: right click your mouse—system setup–general setup–time setup–change the Date format–right click your mouse, pop-up dialog box ,

click the left mouse button in the blank space of this pop-up dialog box, right click, click the left and right button, 12 times, Find out if the font prompt toggles the debug version, click Yes, OK. Go back to the lower left corner of the main interface with a red font. Take a photo to us.

How to contact amazon customer service?

1). Use your Amazon account to log into www.amazon.com

2).Pull down to the bottom of this page and find “Help” button , and click on it to get into a new page

3). Find “Need more help ” in the middle of this page and move it to this button and you will see “Contact Us ” and click on it .Then you will get in touch with Amazon Customer Service Associate.

4).Or you may choose to call the Customer-Service by number 866-216-1072

Add Device (412 camera system)

First you need to connect the camera system to your WiFi.

Click the home button.

 

 

Select your WiFi and enter wifi password

This string of numbers is cloud ID.

Then go to “Eseecloud” app

Networked devices

Input your cloud ID and User name(User name is admin) and password(Camera system has no password by default)

5MP WK-4HB315-1T TZ-HB315 Night Vision is not good,upgrade as below

Please download the firmware at this link :

https://www.dropbox.com/s/gcrg3xw7f42ylys/IPCAKV5C_20221011_3_6_97_572110hsy%281%29.rom?dl=0

After you get the firmware, please copy to your USB DISK root, format should be FAT32,

Pls right click your NVR mouse–System Setup–Channel Setup–IPC Upgrade–Select the correct channel–click start–remove mouse –insert USB disk–wait for camera upgrade successfully

How to solve Most of Network Status Problem?

Please right click NVR mouse choose Fast Network check Network Status

• Healthy network: Network connect successfully
• Gateway Unreachable: means NVR IP Gateway and IP address not in the same gateway as your router, Click Manual Config, then find your router correct IP gateway, such as 192.168.1.1, then IP address should be 192.168.1.***, last numbercan’t be the same as your router, change it on NVR. If you connect with wifi network, you need go to System Setup—Network Setup—Wireless Internet page click View Details and click Manually to change those information.
• Request DNS Error: disable DHCP, change the Preferred DNS to 8.8.8.8, reboot the NVR and router.
• Network Cable Disconnect: make sure the NVR connect with router by Ethernet cable
• Network Card Not Found: on Network Setup page find PPPoE disable it.
• Network Busy: disable DHCP, change the Preferred DNS to 8.8.8.8, reboot the NVR and router.

<p>The post HiSeeu Wireless Camera System installation guide first appeared on NVR IPCAMERA SECURITY.</p>

How to Set up Hik-Connect on Hikvision Recorder for Remote Camera Viewing

Purpose of The Guide

This guide will walk you through the process of using the menus on your NVR to set up your Hikvision system on the Hik-Connect remote viewing app.

Before You Begin

• Ensure that your NVR or DVR is set up locally, that the system has been configured with a password and that your cameras are viewable. If you have not already set up your system please follow the relevant guide from this page.
• Connect your NVR or DVR to your network by running an ethernet cable from the LAN port on the recorder directly to your router.
• Install the Hik-Connect app on your phone or tablet.

Let’s Get Started

The first step of this process is slightly different depending on which version of the Hikvision software is installed on your recorder. Please look at the images below to identify which version you are using and follow the relevant instructions.

Load More :

• How to Set up a Hikvision NVR System
• How to add smart doorbell camera to Hikvision/Dahua NVR?
• How To Hik-Connect Setup Guide

Enabling Hik-Connect on the Recorder

Version 3.0

1) Right click and select Menu and then browse to Configuration > Network > Platform Access.

2) Tick the Enable box. You will then be prompted to create a Verification Code, set this as something memorable and please make a note of it as you will need it again shortly.

3) You should hopefully now see a screen like the one below. If you see a Status of Offline please take a look at this guide to fix that issue before continuing.

Version 4.0

1) Open the Main Menu by clicking the Cog icon and then browse to Network > Advanced > Platform Access.

2) Tick the Enable box. You will then be prompted to create a Verification Code, set this as something memorable and please make a note of it as you will need it again shortly.

3) You should hopefully now see a screen like the one below. If you see a Status of Offline please take a look at this guide to fix that issue before continuing.

Setting up Hik-Connect

The next step is to register for a Hik-Connect account and add the recorder to it.

1) On your phone or tablet install the Hik-Connect app.

2) Select your Region, press Login and then Register. Follow this process through as instructed by the app.

3) Once you have logged in press the + Icon in the top right corner, highlighted on the image below, and then select Scan QR Code.

4) Your phone or tablet camera will now switch on, use this to scan the QR code displayed on the Platform Access menu as shown in the first part of this guide. Once scanned press Add to confirm the new device.

5) You will now see your device list. Select the new device and as in the image above you will see a small preview appear in the bottom right corner.

6) Click on the black box in the bottom right corner and it will take you through to your camera feed. The first time you do this on a new phone or tablet it will prompt you to enter the Verification Code that you created when you enabled Hik-Connect on your recorder in the first stage of this guide.

How to Use Your Computer to Set up Hik-Connect for Remote Camera Viewing

Purpose of The Guide

This guide will walk you through using your computer to enable Hik-Connect on your Hikvision camera system so that you are able to view your cameras on your mobile phone or tablet from any location.

Before You Begin

• Make sure that your Hikvision system is set up locally and that your cameras are viewable on your NVR or DVR. If you have not already set your device up please follow the relevant guide on this page to do so.
• Connect your NVR to your network by running an ethernet cable from the LAN port on your NVR or DVR directly to your router.
• If you are using a Windows computer, install SADP from this page. If you are using an Apple computer, install it from here.

Let’s Get Started

There are three parts to this process. FIrst we need to enable Hik-Connect on the camera or recorder, secondly we will add it to your Hik-Connect account and thirdly we will set up the Hik-Connect app on your phone or tablet so you can view the camera.

Enabling Hik-Connect

1) On your computer open SADP Tool. This program will show you any Hikvision equipment connected directly to your network. You should see a screen like the one below.

If any of your devices show a Status of Inactive please refer to the relevant guide on this page to set your device up correctly before continuing with this guide.

2) Select your NVR or DVR from the list by ticking the box to the left of it. If you have multiple devices showing and are not sure which is your NVR/DVR then searching for the Device Type on google will show you which device is which. If you are only using IP cameras with no recorder then you will need to set up each camera individually. Select one camera, follow the rest of this guide then return to this step for each of the other cameras.

3) When you select the device you will see a panel of information on the right that looks like the one in the image above. Tick the box next to Enable Hik-Connect and a window like the one below will pop up. Please enter an easy to remember Verification Code and make sure you note it down somewhere as we will need this later on.

4) Once you have set and confirmed your Verification Code you will now have a screen like the one below. Enter your devices password in the Admin Password box and press Modify.

5) The last step in this section is to make a note of the relevant portion of the serial number. If you look on the information panel you will see a Serial Number field. The part of the serial number we need to make a note of are the final 9 digits. If you look towards the right hand end of the serial number you will have a block of 8 or 9 numbers. If you see a block of 9 numbers make a note of them, if you only see 8 numbers make a note of the letter immediately beforehand and the 8 numbers.

To make this a bit clearer I will give you two examples from our cameras.

DS-2CD2142FWD-I20170407BBWR741997176 – On this device you can see we have 9 numbers at the end of the serial number, so in this case we would need to make a note of 741997176.

DS-7732NI-I4/16P1620170517CCRC65050055WCVU – On this device you will see that near the end of the serial number we only have a block of 8 numbers, so in this case what we would need to make a note of is C65050055, the block of 8 numbers and the letter before them.

Once you have a note of the relevant part of your serial number we can move on to adding the device to your Hik-Connect account.

Adding Devices to Your Hik-Connect Account

1) Go to www.hik-connect.com and register for an account. Once you are registered you need to log in to the website and you will see the following.

2) Click on the Add button in the top right corner and, in the window that pops up, enter the 9 digits from the Serial Number that you noted down earlier and press the Search button. If the device is online you should see the following screen.

If that window appears press the + icon. If that window doesn’t appear it can be one of two things. First thing to check is that you entered the correct portion of the serial number, please refer to step 5 above to check the serial number you are using. If the number you entered is correct then please refer to this guide to fix the issue before returning to this step and continuing to follow this guide.

3) After pressing the + icon you will be prompted to enter your verification code. This is the code that you set in step 3 of the first portion of this guide.

4) Once you have entered the verification code you should be presented with a screen like the one below. If all has gone well you will see your device with a status of Online.

At this point we can now move on to the final stage of the process, actually viewing the cameras.

Accessing Your Cameras on the Hik-Connect App

1) On your phone or tablet install the Hik-Connect app.

2) Log in using the details that you registered with in step 1 of the previous section of this guide. You will see a screen a bit like the one below.

3) The device you are looking for will have a name that includes the 9 digit serial number you entered in the previous section. Click on that device and it will prompt you to enter the verification code that you set earlier. The only time you will need to use this code is when you first log in to your Hik-Connect account on a new phone or tablet.

If you are using an NVR or DVR then at this point you are now finished, if you are adding individual IP cameras you now need to return to step 2 of the first section of this guide and repeat the process for each camera.

How to Fix a Hik-Connect Status of Offline

Purpose of The Guide

If you have attempted to connect your Hikvision equipment to Hik-Connect following How to Setup Hikvision DVR for Remote Viewing or How to View Hikvision Camera on laptop and have got stuck at the point of getting the device to appear online this guide will walk you through the most common solution.

Product Compatibility

This how-to article relates to Hikvision cameras.

Before You Begin

• If you wish to use a computer make sure you have SADP Tool installed.
• If you want to use the menus on the NVR or DVR make sure you have it connected to a monitor or TV screen with the included mouse plugged in to the device.

Let’s Get Started

Using a Computer

1) Open SADP Tool. Select your NVR or DVR from the list of devices. If you are using IP cameras with no recorder then you will need to address this issue one camera at a time so select one camera and return to this step once completing the process for that camera. Make a note of the IP Address for your selected device,

2) Open Internet Explorer and go to the IP address from the previous step.

3) Log in to the device using the username “admin” and the password that you have previously set on the device.

4) Navigate to Configuration > Network > Basic Settings > TCP/IP

5) On this page make a note of the IPv4 Default Gateway. Near the bottom of the page you will see the DNS Server section. Enter the IPv4 Default Gateway in the Preferred DNS Server field and enter 8.8.8.8 in the Alternate DNS Server field. Save your changes.

6) Now navigate to Configuration > Network > Advanced Settings > Platform Access. If the fix has worked then you will see a Register Status of Online. It can take a minute or two for this status to appear so please wait a minute and refresh the page if you do not see the change immediately.

If that has worked then you can return to one of the two guides linked at the top of this page to continue the setup process.

If that has not worked return to the TCP/IP menu as in step 4 and tick the box for Auto DNS and press apply before checking the status in in step 6.

If at this point you are still having no luck please get in contact for further support.

Using the NVR or DVR

This process is slightly different depending on which version of the Hikvision operating system is installed on your device. This guide will cover both versions so please have a look at the section that is relevant for you.

Version 3.0

1) Right click and select Menu and then browse to Configuration > Network > General

2) Set your Preferred DNS Server so that it is the same as your IPv4 Default Gateway and set your Alternate DNS Server to 8.8.8.8 and press Apply.

3) To check if this has worked browse to Network > Platform Access. You should now see a Status of Online.

Version 4.0

1) Open the Main Menu by clicking the Cog icon and then browse to Network > TCP/IP.

2) Set your Preferred DNS Server so that it is the same as your IPv4 Default Gateway and set your Alternate DNS Server to 8.8.8.8 and press Apply.

3) To check if this has worked browse to Network > Advanced > Platform Access. You should now see a Status of Online..

If that has worked then you can return to one of the two guides linked at the top of this page to continue the setup process.

Video – How to Share Your Hikvision Device Using Hik-Connect

This video will show you how to share your camera through Hik-Connect so it can be viewed by multiple people on their own phones or tablets.

Before You Begin

• Set your Hikvision NVR, DVR or IP Camera on your own Hik-Connect account. If you have not already done so please follow one of the guides on this page  to complete the setup process.
• Make sure that anybody you wish to share the device with has installed Hik-Connect on their phone or tablet, registered for an account and that you know what email address or phone number they registered with.

Let’s Get Started

How to enable Hik-Connect via local GUI

This video will show you how to use the interface on your NVR or DVR to enable Hik-Connect.

Before You Begin

• Set your Hikvision NVR, DVR or IP Camera on your own Hik-Connect account. If you have not already done so please follow one of the guides on this pageto complete the setup process.
• Make sure that anybody you wish to share the device with has installed Hik-Connect on their phone or tablet, registered for an account and that you know what email address or phone number they registered with.

How to register Hik-Connect account via web browser

How to set up Hik-Connect function in iVMS-4200

This video will show you how to add your Hik-Connect account to IVMS-4200 so that you can view your Hikvision cameras remotely on your desktop or laptop using your Hik-Connect login details.

Before You Begin

• Set your Hikvision NVR, DVR or IP Camera on your own Hik-Connect account. If you have not already done so please follow one of the guides on this page to complete the setup process.
• Install the latest version of IVMS from this page on your computer or laptop. You will see multiple versions of IVMS, the one you want is “IVMS 4200”, not the VS, AC or Video Wall version.

Let’s Get Started

How to Upgrade Your Visitor Mode Account to an Official Account

How to Use Visitor Mode in Hik-Connect App

How to unbind your Hikvision device from a Hik-Connect account

This article shows you four different methods of unbinding your Hikvision device from another Hik-Connect account.

TABLE OF CONTENTS

• Log into your Hik-Connect account and manually delete the device
• Use the Hik-Connect unbind function when connected to the same router as the device
• Unbind devices by the local unbinding function of back-end device.
• Unbind devices using SADP when connected to the same router as the device
• Notes

Log into your Hik-Connect account and manually delete the device

Use the Hik-Connect unbind function when connected to the same router as the device

If your mobile phone is connected to the same internet router as the recorder/camera, you can use Hik-Connect to unbind it. 

Simply scan the QR code on the device as if you were adding it to your account, and the app will alert you that the device has already been added to the account. Tap the ‘Unbind’ button and the app will prompt you to enter the username and password that have been set on the device. The username will always be ‘admin’ unless it has been manually changed. You will also need to enter the verification code shown in the app.

Unbind the device via the local recorder interface (does not apply to stand-alone cameras)

If your recorder is on the new firmware (GUI4.0) you can also unbind the device by going into the local recorder menu via a TV or monitor, then Network > Advanced-> Platform Access-> Hik-Connect. Select the unbind button.

Unbind devices using SADP when connected to the same router as the device

If your laptop or computer is connected to the same internet router as the recorder/camera, you can use SADP to unbind it. Download SADP for Windows here, or download SADP for Mac here.

Open up SADP and select the recorder/camera by ticking the box on the far right side of the screen.

Click the ‘Unbind’ button at the top of the window. SADP will prompt you to enter the username and password that have been set on the device. The username will always be ‘admin’ unless it has been manually changed. You will also need to enter the verification code shown.

Notes

1. If the recorder is in a location where it is not connected to a recorder, you may have to bring a router on site to allow for another device to be on the same local area network.

2. When unbinding using Hik-Connect or SADP on the LAN, you must ensure that the area where the device
is located is the same as the location of the account which the device is bound to.

How To Add Port Forwarding Rules with Dyn Address to Hik Connect.

Purpose of The Guide

This Guide will show you how to add your Dyn address or static IP address settings to the Hik connect app on a smart device.

Before You Begin

Make sure all the port forwarding rules are in place and the Dyn address is working or you have a static IP address provided by your internet provider. If you want to know how to add the port forwarding rules, then you need to follow the guide Here.

You will also need to make sure your Dyn address is working, ours is exampledns.dvrdns.org  <- this should direct you to your Hikvision cameras/ NVR login page.

You will also need your recorder password to enable you to add the device to the Hik connect app.

To download Hik Connect can be found here.

Apple IOS

Andriod

Let’s Get Started

1. Open the Hik Connect App.
2. Click + -> Manual Add -> then you will have a load of information to input.
3. Make sure adding type is changed to IP/DOMAIN, then your page should look like this below.

• Alias – Anything you want to name it.
• Address – Dyn Address either we have provided if you are one of our LIVEVIEW / PREMIUMSUP customers, If you want to take a look at our support packages this can be found Retail Customers or Trade Support
• If you have your own DYN address which is working, this will work too, you can also use a static IP address if you have one.
• Port -8000
• Username – admin
• Password – (Password for your recorder).
• Then Click Save Top Right.

Once added, Start Live View.

<p>The post Hikvision Hik-Connect complete setup guide first appeared on NVR IPCAMERA SECURITY.</p>

Blink Mini Camera Not Connecting To Wi-Fi

1. Consider relocating your Mini closer to your Wi-Fi router if it regularly disconnects from your network. Poor signal strength is the most prevalent reason of disconnection.
2. Please double-check that the password for your in-home Wi-Fi network is accurate. This is normally displayed on the router label, although it might also have been set during router configuration. If you’re not sure if you’re using the right password, try connecting a new device to your Wi-Fi network (laptop, tablet, or phone). If your device is already connected to your Wi-Fi network, you can reconnect by entering the password again after detaching and forgetting the network.
3. Check to see if your network is preventing access to the Mini camera. This might happen if you get a notification indicating a device is trying access but you don’t recognize the name. Instead of the Blink product name, radio chips are occasionally used to identify Blink devices. The following are some well-known identifiers that you should allow if they are detected:

– Generic Doorbell Camera

– Generic Security Camera

– My Simple Link

– Texas Instruments

– < no title >

• Do you use VPN on your mobile device?  If so, please disable VPN and proceed with setup. You can enable your VPN after you complete setup.
• Make certain your router is broadcasting a 2.4 GHz network since Blink cameras cannot connect to a 5 GHz band.
• Try restarting your router, which may resolve your connection problem.

Blink Mini Camera Offline

If you see a “Camera Offline” message that says “Your Blink Mini is offline,” it implies the Blink servers can’t communicate with the camera anymore. There are a few actions you may take to get back in touch. Please contact Technical Support if these instructions do not reconnect your camera.

Instead of batteries, the Blink Mini small camera is powered by a direct connection to a USB standard power adapter. The power cable must be securely attached to a 5 volt 1 Amp power source and fully plugged into the camera in order for it to work.

The camera must be linked to a 2.4 GHz Wi-Fi internet connection with upload speeds (coming out from your network) of at least two megabits per second (2 Mb/sec) at all times in order to transmit you photos and audio, even if others are using the same internet connection.

The Blink Mini is usually taken down due to a broken or sluggish internet connection.

The alert shown in the Blink app provides helpful tips. The first, is to check the Wi-Fi internet and the power supply, then check the camera power connection.

How to Fix?

1. Check Wi-Fi. Ensure that you can connect to the internet, and that the password has not been changed. If the password has been changed, refer to the next step.
   Rebooting the Wi-Fi router is often very effective to resolve Blink connectivity issues.
   If you have rebooted your router and Blink does not connect after 3 minutes, continue.
2. Check your password. If the password is changed, or if you wish to use a different Wi-Fi network, tap the Change Wi-Fi button:     Change Wi-Fi     and follow the instructions.
   If the password or network have not changed, continue.
3. To repeat the camera installation process, tap the Delete Camera button:    Delete Camera   and follow the instructions.

Blink Mini Motion Detection Not Working

When some settings limit the camera’s critical functionality, the Blink camera may not respond as expected. It’s possible that the setting was altered manually or by accident.

Before you finish, double-check each area. When the blink camera setting is not working properly, it may be restored as normal.

1) Access the Blink system and ensure the motion detection is turned on. Go to the setting where you can find the motion detection on and off button.

2) The next step is to see if the camera is turned on. It indicates that the camera has a setting where the dark “running man” next to the camera setting button may be seen.

3) In the app, look for another setting that states the entire system is armed. In the lower right-hand corner, you’ll find the setting. It should be turned on.

4) The inability to connect to a Wi-Fi network might be the source of the issue. Getting the proper signal strength will get your camera up and running again. Carry your device close to the router and attach the camera as usual to check for a network problem.

Check and output the video when you’ve finished recording it. The camera is not getting enough bandwidth if it is performing perfectly near the router with a solid network connection signal.

Either the location is out of the WIFI network’s range. Alternatively, the barrier around the camera may be blocking Wi-Fi access. You might also consider replacing your router with a high-capacity Wi-Fi device that broadcasts high-frequency radio waves.

Data may be sent between remote devices using a contemporary Wi-Fi network with high-speed internet access. Check the camera with the various routers to see whether the problem is resolved.

5) Batteries may be the source of the problem. Because they have been stored for a long period, the batteries that come with the cameras may contain a lot of power.

Replace the batteries and test the device to check whether it functions correctly. Allow the camera to remain empty on the table for a minute after removing the batteries. After some time has passed, replace the batteries and check to see whether it works correctly.

More:

1. How to Set up Alexa for Blink devices
2. How to set up battery powered Cameras
3. Troubleshooting Physical Cameras in 3 steps

Blink Mini Camera Night Vision Not Working

Night vision is standard on all Blink Cameras. Blink cameras light an area with an infrared emitter, resulting in a black-and-white image. The intensity of the IR emitter may be changed using the Blink app’s settings.

How To Turn On Night Vision On Blink Camera?

f your default setting somehow has been changed, here is how to enable night vision on your Blink camera.

1. Open the Blink app
2. Click on the Camera Settings icon

The Camere Settings icon in the far right button is located above the camera image. It is to the right of the camera name and just the right of the motion detection icon (The running man).

3. Scroll down to the “Night Vision” section

The Night Vision section is the fourth section down. As of writing this article, the sections are currently in this order: 1. General, 2. Monitoring, 3. Motion Detection, 4. Night Vision, etc.

4. Enable the night vision by changing the “Control” option to either “Auto” or “On”

Blink Camera Night Vision Settings

There are two-night vision settings that you can adjust:

1. Control (On, Off, Auto)
2. Intensity (Low, Medium, High)

Blink Night Vision Control

The Blink night vision control setting is the option that determines if night vision is enabled or not. Whether it comes on or stays off.

The Control setting has three options: On, Off, or Auto.

Auto: Auto will toggle night vision on or off based on the lighting conditions.

On: On will constantly have night vision enabled.

Off: Night vision will not turn on, no matter how dark it is.

Auto is Blink’s default setting and what I would recommend using unless your Blink camera is always going to be in a dark setting.

Blink Night Vision Intensity

The Blink intensity setting is the option that controls how bright the IR emitter shines. This is useful for controlling glare in specific locations.

The Intensity setting also has three options: Low, Medium, High.

After you have the camera mounted and where you plan on keeping it, I’d recommend opening up a live stream when setting the IR intensity.

Steps to set your Blink Cameras IR Intensity

1. Wait until nighttime
2. Open up live view
3. If being used for motion detection, stand as close as you think a person might reasonably stand.
4. Adjust the IR intensity for the best image quality.

If the IR intensity is too high, the image will appear whitewashed. It will be hard to make out objects because everything seems white. Lower the Intensity.

If the IR intensity is too low, the image will appear dark. You won’t be able to see anything. Increase the Intensity.

What Is Dark Mode Setting On Blink Camera?

People will often see the dark mode setting and think it has something to do with night vision. In reality, it has nothing to do with night vision.

The dark mode option allows you to customize the look of your Blink app. Dark text on a white background appears in light mode, whereas light text appears on a dark backdrop in dark mode. The Blink app will match whichever mode your phone or tablet is presently set to in system mode.

So after recommended setting Why Blink Mini Camera Night Vision Not Working?

You’ve set the IR control mode to “On,” but the Blink camera is only showing a black image.

First and foremost, I’d want to point out that there have been known firmware problems in the past. If you own a Blink Mini, make sure the firmware is version 9.70 or above. This update was released in late 2020, so it should be far passed that point by now, but double-checking is always a good idea.

Troubleshooting Steps to Fix it?

• Replace The Batteries With New Batteries
• Ensure The IR Emitter Is Not Covered
• Reboot the Blink Camera
• Remove IR Reflective Materials

Replace The Batteries With New Batteries

If you have a battery-operated Blink camera, either the Indoor or Outdoor variants, difficulties with the IR emitter is one of the first symptoms that the batteries are going to expire.

Changing the IR intensity setting is one method I’ve seen folks play with this. A better image is obtained by lowering the intensity, but a darker image is obtained by increasing the intensity.

I’m not sure what’s going on here, but I’m guessing the batteries are running out of juice and can’t power both the camera and the high-intensity IR emitter.

Ensure The IR Emitter Is Not Covered

This is a common problem when users do not use the mount that came with their Blink camera, or they’re trying to hide the camera behind something.

If you are using custom housing, perhaps a housing so you can use your Blink Mini or Blink Indoor in an outdoor setting, make sure that the IR emitter is not covered.

Blink has diagrams on its website that indicate where the IR sensor is located.

Blink Mini Layout: Click Here

Reboot Blink Camera

I get that this is the beginning of your basic tech assistance, but there is a reason they encourage you to attempt it. It’s simple and can occasionally solve the problem.

Rebooting the device may resolve any firmware faults that have caused it to become stuck in a certain state. Although it’s a software flaw, you won’t have to wait for a firmware update.

For Blink, Mini unplug them from the power source and plug them back in.

If the problem starts back up again in a few days after it was seemingly resolved, it is probably a battery issue. Try replacing them. Blink recommends using lithium AA batteries.

IR Reflective Materials Must Be Removed

When in night vision mode, Blink cameras are extremely sensitive to IR light. That’s how they make a picture! They must be considerate.

However, if the IR light is reflected back into the lens, the camera will be blinded. In a dark room, imagine someone beaming a spotlight into your eyes. You’d be unable to see anything else as well.

Look at the camera view with night vision turned on and look for any white areas. White objects reflect the most infrared light back to the camera.

Shiny items are the most difficult to deal with. Consider the shine on certain types of paneling or the glossy coating on leaves. There are a variety of items that may reflect light back to you.

How To Reset Blink Mini Camera?

The Blink Mini has a reset button on the bottom side of the camera

Helpful Tip: Make certain to perform a reset before and while the Mini is plugged in for best results. We also recommend inserting either a paperclip or small screwdriver (not safety pins or thumbtacks) to reset the camera.

1. A long press of the reset button (more than 5 seconds) will reset it.
2. Both red and blue lights will flash rapidly shortly before the button is released.
3. The blue light will then slowly blink, which indicates the camera is ready to be added to a system.

Contact Blink Support

If none of these solutions seem to be the issue, the camera might be malfunctioning and the IR emitter isn’t working. Blink will send you a replacement after going through basic troubleshooting processes as long as the camera is still under warranty.

The Blink Support “Contact Us” page is located here.

<p>The post Troubleshooting for Blink Mini Camera first appeared on NVR IPCAMERA SECURITY.</p>

1. Once you have installed AVSS (download AVSS PC Client  / AVSS Mac Client ) to the directory of your choice, open the application by double clicking on the icon on your desktop.

2. When AVSS opens, enter your Zosi account name and password. These will be the same credentials you use to access the Zosi Smart App for iOS and Android.

If you don’t have a Zosi Account, select the register option and complete the fields.

It’s strongly recommended that you set up your account using the Zosi Smart app, as you will be able to utilize the QR code found in the DVR’s Information > System screen. CLICK HERE for Instructions on how to connect your Zosi Smart app to your DVR.

3. Once you’re logged in, select the drop-down icon to the right of the “Device List” option. This will reveal the Device List. 

4. Once your Device List is revealed, select the drop-down icons to the left of the device option to reveal your cameras.

The blue square highlighting 1/4th of the quadrant represents the area that you will assign your channels to. From the Device List, double-click on the channel you wish you assign to the quadrant.

5. Once you double click your selected channel, it will begin playing in the assigned quadrant. It may take several seconds to load the stream, and depending on your internet connection, may take longer with each stream you view simultaneously.

Select the next quadrant by clicking on the black box. This will highlight the quadrant in a red box. Continue assigning your channels to the quadrants as desired. 

If you wish to view more than 4 cameras at once, select a separate layout by clicking one of layout icons located below the videos.

If you want to add the device on your AVSS client, please select “Add Device” to add the device.

Please let us know if you have any questions:

<p>The post How to use AVSS – PC Mac Client first appeared on NVR IPCAMERA SECURITY.</p>

PoE Injectors 802.3af

Smart doorbells are low power consumption devices which their maximum power rate is below 10watt, because of this reason, users can take advantage of PoE technology to have a cost-effective and maintenance-free video doorbell system. PoE stands for Power over Ethernet, as the prevalent technology in IT field (PoE for access points, IP telephone, network switches), 802.3af standard has been universally accepted and adopted by different manufacturers.

Smart doorbell has an Ethernet port and complies PoE

Users can choose any PoE injector that complies 802.3af standard. The PoE injectors support 48V, 500mA specification. The PoE injector has two Ethernet port; one LAN port to connect with your router/switch, another PoE port connects to your smart doorbell.

Smart doorbell has an Ethernet doesn’t support PoE

As long as your smart doorbell has an RJ45 port, you can take advantage of PoE by using a PoE injector and PoE splitter. The PoE splitter can split the power and data from Ethernet cable, it should be connected by the end of your smart doorbell.

If you have bought SD-M5 and SD-M3, please choose a standard PoE injector works on mode A (1,2,3,6). PoE injector works on mode A (End-span) utilizing data pairs 1-2 and 3-6 to deliver power. Both SD-M5 and SD-M3 cannot work with none-standard PoE injector (Mid-span) that utilizes 4,5,7,8 pairs.

<p>The post How to choose PoE injectors for wired smart doorbells first appeared on NVR IPCAMERA SECURITY.</p>