How To Face Detection – Face Recognition

HomeGuideHow To

How To Face Detection – Face Recognition

You can configure the system to detect faces and respond with various actions. To configure face recognition: Step 1. From the Live View display, ri

Milesight How to new firmware
Q-See Software Firmware Software Tools
NEW Jovision CloudSEE Firmware Software Download

You can configure the system to detect faces and respond with various actions.

To configure face recognition:

Step 1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.

Step 2. Click EVENTS, then click the Face Recognition tab on the side panel.

Configure face recognition

Step 3. Select a camera to configure face recognition for.

Step 4. Click to enable / disable face recognition on the selected channel.

Step 5. Click Setup next to Schedule to choose which days and times of the week to enable face recognition:

Setup face recognition

  • Click or click-and-drag along the each of the blue timelines to quickly add or remove time from each day’s schedule in 15–minute segments.
  • Select 2 or more the days to link schedules. This allows you to quickly change multiple schedules at once.
  • To make fine adjustments to a schedule, click settings. This will allow you to set exact start and end times for a schedule.

Step 6. Click Setup next to Target Face Database.

  • Check the box next to the face database that you want to use for Face Recognition.
  • Click OK.

Step 7. Click to enable Unfamiliar Face Alarm. Setup alarms if a face has been detected that has not been added to the face database (also labeled “stranger” in AI mode).

Step 8. Click the icon under modify to adjust the Similarity value.

  • Enter a value for the Similarity from 1% being the lowest to 100% being the highest.
  • Click OK.

Step 9. Click the icon under Parameters to set the alarms for face recognition.

Step 10. Click Apply to save all changes.

Congratulations! You have successfully configured face recognition on your D861 Series recorder.


How to create a face database?

To build a face database, you can create a face database list and add faces to each database from a USB drive or live captured faces in AI mode.

To create a database:

Step 1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.

Step 2. Click EVENTS, then click the Face Database tab on the side panel.

Face recognition database

Step 3. Click Add in the bottom right of the screen to add a new database.

New face recognition database

Step 4. Enter a name for the database.

Step 5. Click OK.

The created database will appear in the face database list.


How to add a face to the database by USB?

To add a face to the face database:

Step 1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.

Step 2. Click EVENTS, then click the Face Database tab on the side panel.

Database details

Step 3. Select a database from the list and click the details icon to configure.

Step 4. Click Register to add a face to the database. The USB drive will automatically load.

Register a face

Step 5. Click + to upload a new face image.

Step 6. Use the Register window to add additional information to the face entry, including name and gender.

Step 7. Click OK to save.

The added face will appear in the face database.

Add by USB Drive (Batch Add)

Face pictures can also be imported in batches which is useful when adding a large number of faces at one time.

Add Captured Faces

You can add images to build the face database by using images that have been captured in AI mode.

NOTE: To capture faces using Face Detection, AI mode must be enabled in Live View. From the Live View display, right-click Quick Menu and hover over the Live View option. Click on AI mode to enable.


How to add a face captured by AI mode?

To add a face captured by AI mode:

Step 1. From the Live View display, AI mode will display recently captured faces on the right side of the screen.

Step 2. Double-click on the face that you want to add.

AI mode face

Step 3. Click the button Add to Face Database for the register window to appear.

AI mode add a face

Step 4. Check the box next to the database that you want to add the face to.

Step 5. Add additional details for the face entry including a name.

Step 6. Click OK to save. The added face will appear in the face database.

Face Detection

When enabled, Face Detection can detect the faces of persons as they enter the camera’s field of view.

Face Detection is disabled by default. You must enable it in the recorder.

Step 1. Go to Main Menu > Event > Events Settings.

Event

Step 2. Under Face Settings, click Face Detection.

Face Detection

Step 3. Now, select the (A) Camera you want Face Detection to be enabled with, then turn the Enable button to (B) ON.

AB

Step 4. Then, configure the rest of the features based on your preferences:

  • Select Area
  • Schedule
  • Show Message
  • Record Channel
  • PTZ Activation
  • Sequence
  • Snapshot
  • Buzzer
  • Warning Light

Configuration

Step 5. At the bottom right corner of the screen, click Apply to save your changes.

Apply

Congratulations! You have successfully enabled Face Detection on your recorder.

COMMENTS

WORDPRESS: 0
DMCA.com Protection Status