How to Update the Cameras Firmware Version Online

HomeGuideHow To

How to Update the Cameras Firmware Version Online

How to Update the Camera's Firmware Version Online Purpose: Some wireless cameras support upgrading the version from the network. That means you do

Dahua IPCAM step by step installation
IC Realtime Password Reset
Blue Iris Cameras 2022 Complete Guide

the 's Version Online

Purpose: Some wireless support upgrading the version from the . That means you don't need to have a firmware file. But please note that if your camera works well, we do not suggest to the firmware since there is the risk that some functions will mess up after sometimes.

Steps:

1. Please go to System - to make sure the P2P status is online, you can refer to this picture below to check.01.JA_network_setup.jpg

2. Please go to System -IPC Maintenance to select the camera that you want to and choose Start.
Please remember to select firmware from Network.

02.JA_camera_version.jpg

03_JA_upgrade_confirm.jpg

04._JA_new_firmware.jpg

3. If there is a message shows “Failed to check the firmware”. You can try one more time.

05._JA_Failed_to_check_the_firmware.jpg

4. Then you can see “Downloading the Firmware” like the picture below. It means the camera detects the firmware file and updating.

06.JA._Downloading_the_Firmware.jpg

5. Now, you can see the status shows “Upgrade Succeeds”, it means the camera update finished.

07.JA_Upgrade_Succeed.jpg

When you finished updating the camera's firmware version, you can refer to this link below to enhance the camera's single.
https://help.annke.com/hc/en-us/articles/360000254841-How-to-enhance-video-signal-

How to Update the Camera’s Firmware Version Online?

1. Please go to the system Menu–>System setup-Network setup page to make sure the P2P status is online, you can refer to these pictures below to check.

network_setup.png

 

2. Please go to System Admin–>IPC Maintenance to select the camera that you want to upgrade, and choose Start.

IPC_maintenance_png.png

upgrade.jpg

checking_firmware.jpg

3. If there is a message show Failed to check the firmware. You can try more times.

failed_to_check_firmware.jpg

4. Then you can see “Downloading the Firmware” like the picture below shows. It means the camera detects the firmware file and updating.

downloaading_the_firmware.jpg

5. Now, you can see the status shows“Upgrade Succeed”, it means the camera update finished.

upgrade_succeed.jpg

 

When you finished updating the camera's firmware version, you can refer to this link below to enhance the camera's video signal.

– How to Upgrade Camera‘s Firmware?

1. Connect your to a router with a network cable.

2. Use a computer which also connected to the same router as /NVR is connected to install upgrading software.

software link

support.annke.com/document/XM/General/tool/device_manager.exe

3. Run software manager. It will detect many IPs.

If your system is a 4 channel system, there are 5 IPs. One is NVR‘s IP and other 4 are cameras‘ IP.

you know which one is NVR‘s IP and which one is which camera‘s IP? Below is the method.

4. Select one camera‘s IP and select the upgrading file to upgrade.

COMMENTS

WORDPRESS: 0
DMCA.com Protection Status