Smart Bird Feeder Camera,1080P HD Camera Auto Capture Bird Videos & Solar Panel, App Notify When Birds Detected, Free AI Identify Bird Species, Bird House with Built-in Microphone.

Download Bird Lover app

Download and install the Bird Lover App for either IOS or Android.

Login Bird Lover app

Once downloaded, the APP will prompt you to register your device. Enter your phone number or email address which one makes you feel comfortable and select the country you live in. You will receive the registration code. Input the registration code, then create a password.

Note

Indicator Description

Connect Bird Lover Bird Feeder Camera To Wifi

1. Turn on the Bird Lover Bird Feeder camera power and you will see the indicator light flashing quickly and hear a sound.

.

2. Open the Bird Lover App, click +, select your Bird Feeder Camera (you can choose one at random, the connection is the same), and then follow the instructions of the App.

3. Bird Lover Bird Feeder Camera only supports 2.4G wifi, please make sure your current wifi is 2.4G.
Enter your wifi password, make sure the wifi password and wifi are correct and click Next.

4. Scan the QR code with the Bird Feeder camera. You will hear a prompt sound after a successful scanning.

NOTE: The QR code needs to be aimed at the camera below

5. Wait for Bird Lover Bird Feeder Camera to connect to your wifi, about 60-120 seconds.

Detection settings

1. Turning on or off the “Motion Detection” at the Features interface.

2. Make sure there is an option to turn on notifications.

Click “ME” in the lower right corner, Click the settings button in the upper right corner,Click App Notification.

3. Click “Alarm” to turn on or off. You also can set schedule for “Do Not Disturb Schedule” at the same interface.

Identify live birds

1. Click “bird” icon

2. Click “Gallery”-Click “photo”-Click “bird” icon

Reset Bird Lover Bird Feeder Camera

Press and hold the reset button for 5 seconds to reset the camera.

Bird Lover APP INTERFACE INTRODUCTION

Install Bird Feeder Camera

1. Stick the sticker on the tree or wall and drill holes within the range marked on the sticker.

2. Insert the green plastic screw spacers into the hole.

3. Fix the bracket with long screws.

4. Install the bird feeder and align the three holes underneath.

5. Fix bird feeder with three short screws.

6. Install the perch with the two screws in the package.

7. The bird house can rotate left and right.

How to Charge Bird Lover Bird Feeder Camera?

Bird Lover Bird Feeder Camera FAQ and Troubleshooting

How to get it to connect to two different routers?

It cannot be connected to two different routers at the same time.If you want to change routers, you will need to reset the camera and reconnect your phone and camera. Please make sure that your phone and camera are both connected to the same Wi-Fi network before pairing.

How to reset Bird Lover Bird Feeder Camera?

Why The current network is in poor condition/The APP keeps going round in circles?

The network signal is weak if there are walls between the outlet, router and phone. This is because the network signal is absorbed or blocked by walls or large obstacles. It will help to have strong Wi-Fi with a Wi-Fi extender/booster.

How to charge Bird Feeder Camera?

A solar charging panel integrated into the roof can provide a constant source of power to support the smart bird camera. You can charge the battery of the Bird Box Camera via USB for continuous charging at night and on rainy days.

Why the Bird Lover Bird Feeder Camera battery is drain so fast?

It is low power consumption camera. Plus the solar panel power in charge, it can maintain the daily energy consumption in sunny day. If the battery drains too fast, you should check:

How to identify birds species?

Simply click on the “Identify” icon and the app will identify the bird species and provide a description of the bird. See the manual for details.

Why the recognition result is wrong?

The accuracy of the results depends on the angle and clarity of the bird images.

To ensure a correct result, please ensure that the image is clear enough. The identifying features (bird’s head, tail, wings or pattern on feathers) should not be obscured by obstructions.

The bird should be in the main position in the picture; try to capture the best moment to recognise the bird if the previous recognition accuracy rate is too low; if there are two or more bird species in a picture, the identified result will be the one in the main position.

How many account can connect this Bird Lover Bird Feeder Camera ?

Only one account can connect to Bird Lover Bird Feeder Camera, you can share it with other accounts through the sharing function.

Can I use the Bird Lover Bird Feeder Camera without a TF storage card?

It is not affected for daily use without TF storage card. Without storage card, it can receive notifications, watch in real time, take pictures and record videos (It will be stored in the APP Gallery );

Just can’t record.

Will this camera show video through the app if my phone is 5g?

Yes.

.

<p>The post How To SetUp Bird Lover Bird Feeder Camera first appeared on NVR IPCAMERA SECURITY.</p>

ACH20-1B Thermal Monocular Camera: Using the App

Take some time to learn about using your thermal monocular camera through the companion Thermal Connection app.

Live View Settings

The Live View is the first screen you will see when your camera connects to the app. It includes the following features:

Digital Zoom

Zoom in on a certain part of your camera’s image to magnify details.

1.From Live View, tap .

2.Tap your preferred zoom range.

3.Tap OK to save.

Color Palette

Select your camera’s color palette for enhanced visual representations of thermal imaging.

1.From Live View, tap .

2.Tap on one of the following color palettes:

Note: Not all color palettes are suited for every situation. Select the option that best shows the thermal differences for your specific application.

Record Images & Videos

1.From Live View, tap .

2.Tap the screen to display the capture and record icons.

3.To capture images: Tap .

4.To start or stop recording videos: Tap .

Note: A blinking red dot next to a recording timer on the left of the screen indicates that your camera’s recording.

Function Settings

Enable some of your camera’s features, like the laser pointer, fire detection, or track hot and cold points.

Laser Pointer

Use the laser pointer to illuminate a point of interest with a bright spot of colored light.

 LASER RADIATION:

Exposure to laser light can cause significant damage to the eyes. Never look into the laser beam directly or through a piece of optical equipment.

After a few seconds, the laser pointer automatically turns off.

Fire Detection

Detect fires in your camera’s image with a red box surrounding the source. If enabled, you can set the fire detection sensitivity from high to low.

Hot & Cold Points

Track the hottest and lowest temperatures in your camera’s image at the same time. If enabled, your camera’s image will display a red target tracking the hottest point and a blue target tracking the lowest point.

System Settings

Customize your camera’s system settings or sign out.

Automatic Sleep Mode

Select how long your camera waits before entering sleep mode.

Automatic Shutdown

Select how long your camera waits before turning off.

Change Measurement Unit (Meter to Feet)

Change your camera’s measurement unit.

Sign Out

Disconnect your camera from the app by signing out of the app.

Restore to Default Settings

Restore your camera’s menu and app settings to its factory default settings.

ACH20-1B Thermal Monocular Camera: Troubleshooting

The following article provides some troubleshooting tips for using your thermal monocular camera.

.

Camera’s image/screen is blurry.

Adjust your camera’s diopter to your eyesight. Before you begin, it is highly recommended that you adjust your camera’s diopter to your eyesight. Focusing your view will minimize eye strain and fatigue.

Camera’s Wi-Fi hotspot is not showing.

• Wait a moment for it to appear in your phone’s Wi-Fi settings.

• When enabling your camera’s hotspot in your camera’s settings, try to press  a couple more times.

• Ensure you have allowed the app to use your location, otherwise it will not be able to detect your camera’s Wi-Fi. Navigate to your phone’s settings, then open the Thermal Connection app settings, and enable Location — While Using the App.

Camera is not connecting to the app.

The Wi-Fi password is case sensitive. Make sure you enter the serial number in the same letter format, whether that is uppercase or lowercase.

Camera has disconnected from the app.

Camera’s Live View is frozen in the app.

If the Live View is frozen perform a hard close of the app, then open it again.

Digital zoom is not working.

Digital zoom will not work while your camera’s menu is open. Press  to exit the menu.

Camera is not recording images and videos.

Recording images and/or videos will not work while the menu is open or when your camera is connected to a computer. Press  to exit the menu.

Camera’s screen is black.

Restart your camera. Press and hold  to turn your camera off, and then back on.

Camera is not charging or slow to charge.

• Ensure you use the supplied micro-USB cable and that it is properly connected.
 DANGER

◦ Improper battery replacement or use may result in fire, explosion, or other hazards.

◦ Only use accessories regulated by the manufacturer. Never use the charging cable or power adapter with another product.

◦ Make sure the plug is properly connected to the power socket.

◦ DO NOT charge your camera within 2 m of flammable materials.

◦ DO NOT connect multiple devices to one power adapter. The plug in the power socket could overheat and possibly cause a fire.

• Ensure the USB Mode is set to Off.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to USB Mode.

◦ Press  to open the setting.

◦ Press  to select Off.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

Camera’s battery keeps draining.

You can preserve your camera’s battery life in the following ways:

• Turn off any camera settings or functions that are not being used.

• Use your camera without the app. First, sign out your camera from the app, and then turn the Wi-Fi hotspot off. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to WiFi.

◦ Press  to open the setting.

◦ Press  to select Off.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• Set your camera to go into automatic sleep mode after 1 minute of inactivity has passed. First set your camera’s sleep mode (Suspend Mode) to be automatic, and then set the automatic sleep mode (Auto Suspend) to 1 minute.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to Suspend Mode.

◦ Press  to open the setting.

◦ Press  to select Automatic.

◦ Press  to confirm your setting.

◦ Press  to navigate to Auto Suspend.

◦ Press  to open the setting.

◦ Press  to select 1 Min.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• Set your camera’s screen brightness to low.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to Brightness.

◦ Press  to open the setting.

◦ Press  to select Low.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• Set your camera’s automatic shutdown to 60 minutes or less. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to Auto Shutdown.

◦ Press  to open the setting.

◦ Press  to select 60 Mins or less.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

Camera’s image has lots of graininess or scratches.

• Turn your camera off, attach the lens cap, and allow it to rest for a few hours before using again.

• To improve your camera’s image quality set the FFC Mode to Auto. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to FFC.

◦ Press  to open the setting.

◦ Press  to select Auto.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• To manually correct pixel defects in your camera’s image, set the DPC settings to Manual. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to DPC.

◦ Press  to open the setting.

◦ Press  to select one of the options:

· Auto: (Default) Your camera automatically calibrates defective pixels.

· Press  to start auto DPC.

· Close the lens cap until your camera signals that auto correction is complete.

· Manual: Correct the defective pixels manually.

· Press  to start DPC manually.

·  Press to switch between the X-axis and Y-axis.

· Press and hold  or  to start correction.

· Restore: DPC is restored to original state.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

ACH20-1B Thermal Monocular Camera: Frequently Asked Questions

The following FAQ answers many of the general questions about your thermal monocular camera.

.

How does my thermal monocular camera work?

To improve the visibility of objects in complete darkness, haze, or tough conditions, your thermal monocular camera uses infrared sensors to detect heat given off by a person, animal, or other objects. It creates images of that radiation called thermograms, which display the relative temperatures of different objects with different shades or colors. In a thermogram, warm objects stand out in a contrast or often cooler background. It is widely used in outdoor scenarios for hunting, rescue, animal observation, and more.

Is my thermal monocular camera battery-operated or hard wired?

Your thermal monocular camera is battery-operated, however, to charge the battery you will need to connect the micro-USB cable into your camera’s USB port and the other end into a power source.

Does my thermal camera only work at night?

No. Although thermal imaging cameras are most commonly used for nighttime vision, they can also be useful in daylight. The detection of heat radiation and the high contrast of thermal imaging cameras allow you to see the outlines of (warm-blooded) animals that camouflage well in their environments. It can also help distinguish animals or people in foggy or smoky conditions.

Can my thermal camera see-through walls, metal, or glass?

No, thermal imaging cameras do not see-through surface but detect surface temperatures.

Is thermal imaging and night vision the same thing?

No, thermal imaging can produce pictures without visible light while night vision cameras work by boosting ambient light. Their only common purpose is increasing visibility in low light conditions.

Can bright sunlight damage my camera’s lens?

Yes, aiming your camera’s lens with the lens cap open at powerful light sources (i.e. the sun) is not recommended, as this may adversely affect the accuracy or damage the thermal imager.

What is the clicking noise my camera makes?

This is simply the noise your camera makes while you are shifting it between different fields of view. The noise you are hearing is your camera focusing and calibrating the image to achieve the highest resolution possible.

Should I charge my camera’s battery before first use?

Since your camera’s battery is delivered partially charged, it is recommended that you fully charge it before first use.

How do I charge my camera’s battery?

Your camera has the following 4 battery charging statuses, as shown by the LED charging indicator located under the USB port.

How do I turn my camera on or off?

Press and hold .

Where can I find the mobile app?

The Thermal Connection Application can be downloaded on your smartphone with a valid Internet connection from iTunes or Google Play respectively.

See the article Connecting to the App for more details.

Why do I need to allow my Location Permission on the app?

The app requires permission to detect your Wi-Fi network in order to connect your camera to the app.

How do I connect my camera to the app?

See the article Connecting to the App for full details.

How do I disconnect my camera from the app?

For steps on disconnecting your camera from the app, see the article Using the App.

What is my camera’s Wi-Fi name and password?

Where can I find my camera’s serial number?

Your camera’s serial number can be found on:

• The serial tag located on the side of your camera.

• Your camera’s system information.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to (System Information).

◦ Press  to open your camera’s system information.

How do I record images & videos?

• To capture images: Press 

• To start or stop recording videos: Press and hold  for 3 seconds. A blinking red dot next to a recording timer on the left of the screen indicates that your camera is recording.

Note: Your camera cannot record images or videos while the menu is open or when connected to a computer.

For steps on recording images and videos from the app, see the article Using the App.

How do I zoom in my camera’s image?

To switch the zoom range: Press . Keep pressing to zoom in and out.

For steps on using digital zoom from the app, see the article Using the App.

How do I turn the laser pointer on?

 LASER RADIATION:

Exposure to laser light can cause significant damage to the eyes. Never look into the laser beam directly or through a piece of optical equipment.

To turn the laser on: Quickly press  two times.

For steps on using the laser pointer from the app, see the article Using the App.

How do I change my camera’s color palette?

To quickly change the color palette: Press .

For steps on switching the color palette from the app, see the article Using the App.

Which color palettes can I choose from?

Select your camera’s color palette for enhanced visual representations of thermal imaging. Switch between any of the following color palettes:

Note: Not all color palettes are suited for every situation. Select the option that best shows the thermal differences for your specific application.

How do I measure my target’s distance?

Measure the range distance between your camera and your target using the pre-set ranging modes for animals, people, etc.

• Press and hold  to open the menu.

• Press  or  to navigate to Ranging Mode.

• Press  to open the setting.

• Press  to select one of the options:

◦ Wolf: Measure your distance from a wolf, with a pre-set height of 1.2 m.

◦ Customize: Enter a custom height to measure your distance from your target.

◦ Wild Boar: Measure your distance from a boar, with a pre-set height of 0.9 m.

◦ Human: Measure your distance from a human, with a pre-set height of 1.8 m.

◦ Rabbit: Measure your distance from a rabbit, with a pre-set height of 0.3 m.

• Press  to confirm your setting.

• Press  to exit the menu.

How do I change my camera’s measurement unit?

For steps on changing the measurement unit from the app, see the article Using the App.

How do I track hot & cold points?

Track the hottest and lowest temperatures in your camera’s image at the same time. If enabled, your camera’s image will display a red target tracking the hottest point and a blue target tracking the lowest point.

• Press and hold  to open the menu.

• Press  or  to navigate to Hot Point.

• Press  to open the setting.

• Press  to select one of the options:

◦ Off: Hot and cold points is turned off.

◦ On: Your camera will track hot and cold points.

• Press  to confirm your setting.

• Press  to exit the menu.

For steps on enabling hot & cold points from the app, see the article Using the App.

How do I enable fire detection?

Detect fires in your camera’s image with a red box surrounding the source. If enabled, you can set the fire detection sensitivity from high to low.

• Press and hold  to open the menu.

• Press  or  to navigate to Fire Warning.

• Press  to open the setting.

• Press  to select one of the options:

◦ Off: Fire detection is turned off.

◦ High, Middle, or Low: Your camera will detect fires based on the sensitivity level.

• Press  to confirm your setting.

• Press  to exit the menu.

For steps on setting fire detection from the app, see the article Using the App.

How do I enable the fire detection alarm?

Set your camera to sound an alarm when fire is detected in the image.

Note: The fire detection alarm works only when your camera has fire detection enabled on either High, Middle, or Low.

• Press and hold  to open the menu.

• Press  or  to navigate to Alarm.

• Press  to open the setting.

• Press  to select one of the options:

◦ Off: Fire detection alarm is turned off.

◦ On: Your camera will sound when fire is detected.

• Press  to confirm your setting.

• Press  to exit the menu.

How do I export recordings?

Export recorded images and videos from your camera’s microSD card.

• Press and hold  to open the menu.

• Press  or  to navigate to USB Mode.

• Press  to open the setting.

• Press  to select Mass Storage.

• Press  to confirm your setting.

• Connect the micro-USB cable into your camera’s USB port and the other end into an available USB port on your computer.

• The microSD card’s storage will open on your computer desktop. Select files to export, then copy them onto your computer.

• After exporting, disconnect the micro-USB cable from your camera and computer.

• Press  to select USB Mode Off.

• Press  to confirm your setting.

• Press  to exit the menu.

Where does my camera store recorded images and videos?

Your camera stores recorded images and videos onto the microSD card.

What is my camera’s maximum storage capacity?

You can insert a microSD card with up to 256GB storage space.

How do I hide the icons on the top right of my camera’s image?

• Press and hold  to open the menu.

• Press  or  to navigate to Status Bar.

• Press  to open the setting.

• Press  to select Off.

• Press  to confirm your setting.

• Press  to exit the menu.

How do I change the language displayed in my camera’s menu?

• Press and hold  to open the menu.

• Press  or  to navigate to Language.

• Press  to open the setting.

• Press  to select your preferred language.

• Press  to confirm your setting.

• Press  to exit the menu.

Note: This will only change the language in your camera’s menu, not the app.

How do I restore my camera’s settings to default?

For steps on restoring your camera’s settings to default from the app, see the article Using the App.

How do I update my camera?

Update your camera through the microSD card.

Note: To download the latest firmware update for your camera, contact the Technical Support team.

• Press and hold  to open the menu.

• Press  or  to navigate to USB Mode.

• Press  to open the setting.

• Press  to select Mass Storage.

• Press  to confirm your setting.

• Connect the micro-USB cable into your camera’s USB port and the other end into an available USB port on your computer.

• The microSD card’s storage will open on your computer desktop. Copy the update program to the microSD card.

• Press and hold  and  at the same time for 3 seconds. A blue screen will indicate that an update is in progress.

After a few minutes the update will complete and you will see your camera’s live view image.

Where can I download my camera’s latest firmware update?

To download the latest firmware update for your camera, contact the Technical Support team.

Can I mount my camera to a tripod?

Yes, the tripod thread can be found on the bottom of your camera.

Can I access my camera’s Live View from an external monitor?

Yes, you can access your camera’s Live View from your computer by connecting your camera using the micro-USB cable.

What is the buzzer option in the app settings?

The buzzer is not compatible with your camera.

ACH20-1B Thermal Monocular Camera: Connecting to the App

Follow the steps below to connect your thermal monocular camera to the Thermal Connection app.

Note: The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: Wi-Fi 2.4 GHz (2.4 GHz to 2.4835 GHz) 20 dBm.

.

Step 1 – Download the App

Download your camera’s mobile app, Thermal Connection.

.

Step 2 – Enable Your Camera’s Wi-Fi Hotspot

Looking into your camera:

• Press and hold  to open the menu.

• Press  or  to navigate to WiFi.

• Press  to open the setting.

• Press  to select AP (Access Point).

• Press  to confirm your setting.

• Press  the exit the menu.

Step 3 – Connect to the App

You will now be able to view your camera from the app and make some minor setting adjustments.

.

<p>The post Thermal Monocular Camera user manual first appeared on NVR IPCAMERA SECURITY.</p>

ATTENTION: Prior to purchasing and installing an accessory antenna, read the product specifications of your receiver to determine if your receiver has a weatherproof housing. Installing your weatherproof receiver outdoors provides a better line-of-sight between the receiver and the camera, increasing the strength of the wireless signal. See your product specifications to determine the weatherproof rating of your receiver.

The Directional Wireless Panel Antenna and the Omni-Directional Antenna are used to extend the range of one or multiple wireless or wire-free cameras.

Directional Wireless Panel Antenna (ACCANTD9)

Omni-Directional Antenna (ACCANTO8)

Use the 2.4GHz Directional Wireless Panel Antenna (ACCANTD9) to focus a wireless signal onto one specific wireless device (camera or receiver) to increase the range of transmission. A clear line-of-sight between the antenna and the wireless device needing range extension is required.

Use the 2.4GHz Omni-Directional Antenna (ACCANTO8) to enhance the signal of one or multiple cameras that are paired to a single or dual antenna receiver. You may also use two Omni-Directional Antennas to extend the range of all cameras paired to a dual antenna receiver.

REQUIREMENT: To connect the antenna directly to the camera or receiver, the device must have a removable SMA type antenna. Visit www.lorextechnology.com/compatibility to ensure the antenna is compatible with your camera or receiver model.

Lorex Wireless Cameras and Monitors guide 2024

Also Read  : Lorex Camera Troubleshooting

Recommended Antenna Installation Methods

Your antenna needs will vary depending on the setup of your camera system, the number of cameras that require range extension, and the number of channels on your wireless receiver. Review the scenarios below to ensure you have the correct antenna and installation method to meet your needs.

Click a setup scenario to see the recommended installation method:

Combining Accessory Antennas

If you have installed your accessory antenna according to the recommended installation methods and would like to enhance wireless signal strength even further, you may add an additional Directional Wireless Panel Antenna (ACCANTD9) directly to a camera. The additional Directional Wireless Panel Antenna can be used with a Directional Wireless Panel Antenna or with an Omni-Directional Antenna attached to the receiver.

Click an antenna combination to see recommended installation methods:

Scenario 1: Extend the range of one camera paired to a single antenna receiver

To extend the range of one camera connected to a single channel receiver, use the Directional Wireless Panel Antenna (ACCANTD9).

The Directional Wireless Panel Antenna can be connected in two configurations.

Configuration 1. Connect the antenna directly to the camera

Configuration 2. Connect the antenna directly to the wireless receiver

REQUIREMENT: The antenna connects using an SMA cable and replaces the existing antenna on either the camera or wireless receiver. Check www.lorextechnology.com/compatibility to determine if your product is compatible with the antennas.

Scenario 2: Extend the range of one camera paired to a dual antenna receiver

To extend the range of one camera connected to a multi-channel receiver, use the Directional Wireless Panel Antenna (ACCANTD9). Connect the Directional Wireless Panel Antenna directly to the camera.

Scenario 3: Extend the range of select cameras paired to a dual antenna receiver

To extend the range of select cameras on a multi-channel receiver, use the Omni-Directional Antenna (ACCANTO8).

Connect the Omni-Directional Antenna to one of the antenna ports on the wireless receiver.

REMINDER: Each antenna port on a dual antenna receiver is associated with specific camera channels. One antenna communicates with odd numbered channels (1, 3, and 5), while the other antenna communicates with even numbered channels (2, 4, and 6). See the table below for dual antenna channel configurations.

If you connect the Omni-Directional Antenna to an antenna port and your wireless signal does not improve, try switching the Omni-Directional Antenna to the other antenna port or pairing your camera to a different camera channel.

Scenario 4: Extend the range of all cameras paired to a dual antenna receiver

To extend the range of all cameras on a dual antenna receiver, connect an Omni-Directional Antenna (ACCANTO8) to each antenna port on the receiver.

IMPORTANT: Two Omni-Directional Antennas are required to accommodate this setup.

Combination 1: Combine two Directional Wireless Panel Antennas

If you are using a Directional Wireless Panel Antenna (ACCANTD9) to enhance the signal of a single camera with a single channel receiver, you can use an additional Directional Wireless Panel Antenna to further enhance the wireless signal.

Connect one Directional Wireless Panel Antenna directly to the camera and one Directional Wireless Panel Antenna directly to the wireless receiver. To maximize signal strength, it is recommended to aim the two antennas directly at each other with a clear line-of-sight.

Combination 2: Combine a Directional Wireless Panel Antenna with an Omni-Directional Antenna

If you are using an Omni-Directional Antenna (ACCANTO8) to enhance the signal of multiple cameras, you can further enhance the signal of a specific camera by connecting a Directional Wireless Panel Antenna (ACCANTD9) directly to the camera.

A clear line-of-sight between the Directional Wireless Panel Antenna and the Omni-Directional Antenna is recommended to maximize signal strength.

Lorex SD Pro App: Changing / resetting the password

If the password for the Lorex SD Pro app to view the Wireless Home Monitor is lost or forgotten it will need to be reset.

To reset the Lorex SD Pro app password:

1.Ensure that your Wireless Home Monitor is connected to a network router using the included Ethernet cable.

2.On the Wireless Home Monitor tap the Menu icon ().

3.Use the joystick to select Settings > Network > Reset Password.

4.Select Yes to confirm.

5.Tap the Menu icon () repeatedly until all the menus are closed.

6.Launch the SD Pro app and enter the default password. Refer to your user manual for your default password. You will be prompted to create a new password.

Lorex SD Pro App: Setting up Wireless Home Monitor remote access

You can access and view wireless cameras from a Wireless Home Monitor system using an iPhone, iPad, or Android smartphone or tablet using the Lorex SD Pro app. It is available at the App Store or Google Play Store.

Prerequisites:

To set up the mobile application:

LW2700 Wireless Home Monitor: Included cables and accessories

LW2700 Series Wireless Home Monitors support wireless cameras using a wireless signal. They do not have an internal battery and require a connection to a power source. Refer to your user manual for model specific information on cables and accessories. Click here for downloads and documentation for your product.

Most wireless home monitors include the following cable connections and accessories when purchased:

Network: Wireless camera Internet requirements

Standard wireless cameras that connect to a DVR / NVR, do not need access to the Internet to function. Stand-alone IP cameras do not require an Internet connection for basic functions, but an Internet connection is required for full functionality.

Security Cameras: Understanding Field of View (FOV)

Field of View (FOV) is the maximum observable area that is seen at any given moment through an optical device such as a camera lens. The coverage of the area can be measured using the horizontal and vertical distances to find the diagonal of the area in degrees. Mathematically, the FOV is calculated using the horizontal dimension of the sensor (h) and the Focal Length (F).

You can find the camera’s Field of View details in the Specifications sheet. Click here for additional support content including security camera documentation.

The Camera Lens, Sensor and Focal Length

Focal length (F) is the distance between the center of a lens and its sensor. The size of the lens is the aperture size.

These factors affect field of view. A narrower focal length captures more of the scene and displays a larger field of view. A wider focal length magnifies a scene and decreases the field of view. The higher the focal length value the lower the FOV.

Types of Camera Lenses

Fixed: a fixed camera focal length provides an Angular FOV which is permanently set and cannot be adjusted by the user. Varifocal: the camera focal length can be manually adjusted by the user. Generally, this is done manually with screws or dials. At Lorex we have motorized varifocal cameras that allow you to digitally zoom using your phone or NVR without losing details. These lenses provide flexibility and customization for your camera image needs.

The importance of Field of View

A wide angle lens or smaller lenses produce a greater field of view and captures more objects in a scene enhancing your ability to cover larger and wider areas such as foyers, parking lots or warehouses.

A narrow angle lens or larger lenses produce a smaller field of view; capturing a limited area, but the camera quality image improves in detail. These are designed to monitor a specific object, such as cash registers, entrances/exits, hallways or objects of value.

How to Calculate the FOV

To calculate the FOV requires the sensor size and the focal length of the lens: h = Sensor Size F = Focal Length of the Lens

FOV is represented by this equation: FOV = 2tan-1(h) / 2F

Example: h = 4.7mm F = 6mm FOV = 2tan-1(h) / 2F = 2tan-1(4.7)(12) = 2tan-1(0.39) = 2(21.4°) = 42.8°

W482CAD – 2K Wi-Fi Camera : Frequently Asked Questions

The following FAQ article answers many of the general questions about the 2K Wi-Fi Camera with Smart Deterrence (W482CAD). Where applicable, the FAQ includes links to articles where you may find more information.

.

Where do I place my Lorex 2K Wi-Fi Camera?

.

How should I position my Lorex 2K Wi-Fi camera?

When mounting the camera on a wall, make sure of the following:

 Accuracy of person detection will be influenced by multiple factors, such as the person’s distance from the camera, the height of the person, and the height and angle of the camera. Night vision will also impact the accuracy and distance of detection.

.

How do I enable motion detection and person detection?

1.Launch the Lorex App.

2.Tap  icon above the channel thumbnail on the Devices screen.

3.Tap Motion Detection Settings.

4.Tap  icon to enable Motion Detection.

Note: If motion detection is disabled, general/person/vehicle detection will automatically disable and you will not receive any motion detection notifications in the Lorex App.

.

How do I customize Motion Zones™?

Motion Zones™ allows you to customize your device’s motion detection region. Motion Zones™ screen consists of the following settings:

To set Motion Zones™

1.Launch the Lorex App.

2.Tap  icon above the channel thumbnail on the Devices screen.

3.Tap Motion Detection Settings.

4.Tap Motion Zones™.

 For full instructions on how to set customized Motion Zones™, see Configuring Motion Zones™.

.

Why am I receiving so many notifications?

There are a few ways you can lower the number of notifications you are getting.

.

How do I enable Color Night Vision?

1.Lauch the Lorex App.

2.From the Devices screen, tap  icon to configure device settings.

3.Tap  icon to disable Auto Night Vision.
Note: Disabling Auto Night Vision will force the camera into Color Night Vision mode. Recommended in low-light conditions.

.

How to activate Two-Step Verification?

1.Launch the Lorex App.

2.Tap Settings.

3.Tap Account Settings.

4.Tap Two-Step Verification.

5.Tapicon to enable Two-Step Verification.

For detailed setup instructions, see Two-Step Verification Setup.

.

How to optimize video quality?

1.Launch the Lorex App.

2.Tap  icon above the channel thumbnail on the Devices screen.

3.Tap Video Settings.

4.Tap  icon to enable HDR (High Dynamic Range).

Note: Enabling HDR optimizes video picture in high-contrast conditions such as under-lit and over-lit areas.
By default, the video quality is set to High (2x1080p HD).

.

What is Home & Away™?

Lorex App can automatically use your location to manage your notifications when you are at home or away. The app will notify you when you are inside/outside of your set home perimeter.

To start using this feature, navigate to your mobile device settings and enable Location services for Lorex App.

For detailed setup instructions, see Configuring Home & Away™.

.

How do I activate the LED deterrence light when motion is detected?

1.Lauch Lorex App.

2.From the Devices screen, tap  icon to configure device settings.

3.Tap Deterrence Light Brightness.

4.Tap  icon to enable camera’s deterrence light whenever motion or person is detected.

.

How do I remove the 2K Wi-Fi Camera from my account?

1.Launch the Lorex App.

2.From the Devices screen, tap  icon to configure device settings.

3.Tap Remove Device.

.

How to permanently delete data of 2K Wi-Fi Camera?

Refer to Formatting Device Storage for more information.

.

Does my device support WPA2 or WPA3?

Your device supports Wi-Fi Protected Access 2 (WPA2) which is the industry standard security protocol for Wi-Fi networks. WPA2 offers security against unauthorized access and data interception and is supported by most Wi-Fi routers including those that support both WPA2 and WPA3. It employs Advanced Encryption Standard (AES), an encryption mechanism, which secures communication between your camera and Wi-Fi network to keep transmitted data confidential. For information on which devices support WPA2 and which devices support WPA3, please refer to “WPA2 and WPA3 Supportive Devices.”

.

What are the compatible SD cards?

Refer to Compatible SD Cards and Storage Sizes for more information.

.

What devices are compatible with the 2K Wi-Fi camera?

Refer to Product Compatibility Chart for more information.

W482CAD – 2K Wi-Fi Camera : Installation

This article provides instructions to install your Lorex 2K Wi-Fi camera with Smart Deterrence (W482CAD).

.

What is included in the box?

The above contents are based on one camera.

.

How to connect with Lorex App

3.Open the Lorex App app and create an account or login with your credentials.

4.Tap  icon to add a new device, then follow the in-app instructions to complete the device setup.

For full instructions on Lorex App setup, see Connecting with Lorex App.

.

How to mount 2K Wi-Fi Camera to the wall

.

How to mount 2K Wi-Fi Camera to the ceiling

Wi-Fi Security Cameras – How to Read a MicroSD card

To view the contents of a MicroSD card on a laptop or computer, follow these steps:

a. Select the day to play back:

b. Click on the available folder:

c. Within the folder, click either the day folder (Video files) or the jpg folder (Snapshots):

d. Click to select a video time from 00 – 23 hours:

6.Click the MP4 video file to view the video. 

Wireless Home Monitor: Audio not working

If the audio is not working on your Wireless Home Monitor:

• Ensure that the protective film is removed from the camera lens.

• Ensure that the monitor volume is not muted. A mute icon () will be visible on the screen if the volume has been muted.

• Turn the monitor volume up using the volume buttons on the side of the unit. Location will vary by model. For exact location of volume buttons for your model, refer to your user manual. Click here for downloads and documentation for your product.

• The camera must be in Full Screen mode for audio. Tap the Channel Select icon () to switch between channels in Full Screen mode. Audio is disabled in Quad mode.

If audio is not working after increasing the volume and viewing in Full Screen mode, restore the system to default settings.

To restore your monitor to default settings:

CAUTION: Restoring to default settings will erase any setting input on the monitor. Your monitor will need to be reconfigured.

1.On the monitor tap the Menu icon ().

2.Use the joystick to select Settings > Default Settings.

3.Select Yes.

.

<p>The post Lorex Wireless Cameras and Monitors guide 2024 first appeared on NVR IPCAMERA SECURITY.</p>

These setup discrepancies often translate into unreliable readings and missed opportunities, rendering the system less effective in its primary task of accurate number plate recognition. The good news is that with proper optimization, these systems can be significantly improved. In this comprehensive guide, we will explore practical methods to enhance ANPR accuracy with best practices for camera setup.

Whether you are a seasoned professional or an enthusiastic beginner, these techniques will enable you to maximize the potential of your ANPR system, ensuring precise and reliable results. 

The Basics of ANPR Technology

ANPR technology is a sophisticated system designed to automatically capture and interpret license plates on vehicles. By leveraging advanced algorithms and optical character recognition (OCR) technology, ANPR systems can rapidly analyze images or video frames, extract license plate information, and convert it into readable digital data. 

In other countries, ANPR is also referred to as Automatic License Plate Recognition (ALPR) and, simply, License Plate Recognition (LPR). 

Here’s a breakdown of the key components of ANPR technology:

Components of an ANPR System

Understanding these fundamental components is essential for users aiming to optimize their ANPR systems. With a clear grasp of the technology’s basic principles, individuals can proceed to implement the necessary adjustments and enhancements for improved accuracy and reliability.

Best ANPR Camera System Setup

Read More : How To Install Synology Surveillance Station

Factors Impacting Your ANPR Camera Setup

There are a number of fundamental components that make any ANPR Camera setup successful. These include:

Of these three, we see that camera setup holds the most potential for improvement for businesses and consumers to significantly bolster their ANPR results. We draw this conclusion because we know that our Plate Recognizer ANPR engine has been thoroughly tested and optimized to handle blurry, low-resolution, and dark images as well as other aspects of the real-world environment.  Feel free to reference the results of our ALPR benchmarking exercise. 

Further, counter to claims from camera manufacturers, we see that a modest, mid-range or even low-end IP camera performs just as well as a high-end, expensive camera.  Of course, no LPR camera vendor is going to admit this because they need a way to justify their existence.  As a side note, we even have customers running our software with existing CCTV cameras.

From our years of experience supporting and helping clients troubleshoot their license plate recognition systems, we have observed how the proper camera setup along with a strong ANPR engine can be an effective solution to detect and decode vehicle license plates.  This article offers specific tips and suggestions on how to best set up your camera to maximize your ANPR.

Before You Begin, an Important Note

With your ANPR Camera Setup, please keep in mind that if your eyes can easily read a license plate through the camera, our ANPR engine can too. However, if you’re squinting and struggling to see the license plates, our engine might find it challenging as well. Visual clarity is the key. A clear view means accurate reads.

Camera Zoom For The Best ANPR Systems

When it comes to zooming the camera for best ANPR, it is important to avoid having a high-level view of the overall parking lot or site.  This is called under-zooming, where the camera is capturing an overall wide-angle view of the landscape.  So the above two images are not set up correctly for best ANPR results.

For beginners handling license plate recognition, there is a common misconception that a wide-angle shot is the best.  Cameras will seek to aim wide across parking lots rather than towards entrance or exit points which allow them to truly pick up plates and get a good read. 

To address this, adjust the camera positioning and zoom in on the ingress and egress areas of the parking lot.  Rather than have a wide-angle view of the street with all the homes around it, it is better to focus on just the street itself where cars are driving by.

In the photo below, the left image shows a wider angle of the gate entrance. For best practices ANPR, it is important to zoom the camera closer to the gate.  Again, if the camera can see the vehicle plate well, then our ANPR engine ought to do a very good job of reading the plate.

If you are in an area using CCTV cameras, Plate Recognizer’s software may still work. While CCTV cameras are typically on the lower end of the quality spectrum, they may still be suitable to capture vehicles moving at low speeds.

ANPR Camera Setup: Ideal Camera Distance 

The maximum advisable distance between the camera and the vehicle is 35 meters.  Actually, whenever possible, it is preferred to minimize that distance.  Why? Minimizing the distance between the camera and the vehicle helps ensure that the camera can easily focus without the need to zoom in on the target vehicle.  This helps reduce image blurriness.

When you place the camera far away from the vehicles it needs to read, you will need a camera with very strong zoom capabilities. The more the camera uses the zoom, the harder it is for the images to come out clear and crisp. 

Another cause for blurry images can be if the camera is mounted improperly, or becomes loose. Typically, ANPR cameras are outdoors and exposed to the elements so this is going to happen at some point if the cameras aren’t installed securely. This can cause the camera to move, shake or vibrate.  These small vibrations can result in image blurriness when the zoom level is high.  For example, you can test this yourself by using your smartphone camera and zooming in all the way to view a car in the distance.  Apply a small amount of movement to the camera and you can easily observe how the camera view totally changes!

We have actually tuned our algorithms and even added a new parameter called Merge Buffer to help accommodate camera vibrations.

PRO TIP: Use Your Mobile Phone to Do a Test

Before you set up the camera, use a mobile phone as a test subject. Place the phone in the position where you intend to install your ANPR camera. Set the smartphone to the number of pixels and settings of the camera you plan to purchase.  Then, just record 10 minutes of footage and use Stream to analyze the recorded video for license plate recognition.

Camera Angle To Improve ANPR

While Plate Recognizer ANPR has been tuned to support a wide variety of license plate angles, it’s always ideal to have the camera set up appropriately. In terms of angle, the setup of the ANPR camera can be positioned in two ways: slope, vertically, and horizontally.  For both cases, it is advisable to have a maximum of 45 degrees for a proper read of the license plate. 

Remember, just because you set up your camera for 45 degrees, your customers/drivers don’t always drive in a straight line!  

ALPR vendors can make outrageous claims that their software can do anything, but at Plate Recognizer, we’re not going to lie to you. There are things our software can do, and things it can’t!  Not every angle is going to be possible, and no camera is going to be a super machine that can see a license plate while bending over backward in the middle of a blizzard. 

So for example, Plate Recognizer’s ALPR engine can support up to a 53-degree tilt, and a 70-degree side angle. What it can’t do is catch a plate number at 75 degrees.

In fact, we’ve compiled real-world ALPR results.  Take a look.

Minimum Resolution For Best ANPR

We see a lot of unsuccessful LPR due to very fuzzy images of the license plate.  This is by and large due to the fact that the camera does not have the resolution required to capture a good plate image.

While Plate Recognizer works with any IP camera, we recommend that the license plate itself must have roughly 100 pixels in width.  Otherwise, our ANPR engine may not be able to effectively read the license plate.

Since every LPR camera setup will be different, you’ll need to figure out the correct amount of megapixels (MPs) needed.  Basically, the number of megapixels required will ultimately depend on the distance of the camera to the license plate.

The width of the license plate will depend on the country you’re in.  Here are some examples:

Once you have an idea of the width of plates for your ANPR camera setup, you’ll need to figure out the MPs needed. There’s a bit of math here to calculate, so we’ll save you the headache and go straight to the answer.  

The table below summarizes the maximum distance in feet from the camera to the vehicle plate for each of the 3 major regions/countries.  You’ll note that we used 80 pixels of width for the plate, even though our ALPR benchmarking indicates that our engine can read a plate even at 30 pixels width.  We chose 80 pixels width to add some cushion–just to be on the safe side.

So net net, if you have to set the camera up at over 30 feet from the vehicle plate in the USA, then you’ll need to get a 4 MP camera or better.

PRO TIP: If the above topic on camera resolution is confusing, no worries.  Just use your eyes!  Basically, if you can see the license plate number in the camera footage with your own eyes, then Plate Recognizer’s engine should be able to read the plates, too. But if you’re having a really hard time seeing the plate–even after squinting and zooming in–then please don’t expert Plate Recognizer to do magic.

ANPR Camera Setup for Night-Time: Sufficient Infrared

If you have a great ANPR system, but no infrared (IR) light capabilities, you will have a tough time capturing plate numbers at night. This is because when it’s dark, there’ll be glare on the plate from the headlights.  If you’re using ANPR to detect crime, which often happens at night, you’d need to make sure you have good IR.

Infrared cameras utilize LED lights to illuminate the plate area with infrared light, which is invisible to humans.  Cameras with an IR cut filter automatically adjust IR light levels so that you can get consistent colored images in the daytime and black/white images at night.

Depending on the exterior lighting, you may be able to get a license plate read at night without IR, but it won’t have the same accuracy. Using IR may also help you pick up images in different weather conditions. For example, if you are in a location that gets a lot of rain, an ANPR system that relies on white and natural light will have a hard time getting accurate images. 

For optimal IR use, you’ll want to place the camera on an angle so it isn’t pointing directly at headlights. This will avoid unnecessary glare risks and ensure you’re getting a good shot of the license plate. 

If your current LPR camera doesn’t have IR, you can always buy an inexpensive external IR unit instead of upgrading your entire system. It costs around $20-25 on Amazon.  The IR technology built into a camera may also not be enough, so adding another external device can increase accuracy.

Lighting Tips for ANPR Camera Setup

Adjusting the lighting for your ANPR camera setup is essential to ensure optimal performance and accurate license plate recognition. Proper lighting helps to minimize shadows, glare, and overexposure, which can obscure or distort license plate images, leading to recognition errors. 

By providing even lighting and strategically positioning lighting sources, you can enhance visibility and clarity, particularly in challenging environments such as parking lots, highways, or private properties.

Here are a few lighting tips based on how you’re going to utilize your ANPR setup:

ANPR Camera Lighting for Parking Lots

For parked cars going in and out of a parking lot, the ideal lighting setup would typically involve evenly distributed and consistent lighting throughout the parking area. This helps ensure that license plates are clearly visible to ANPR cameras regardless of the vehicle’s position.

Other tips for optimal lighting in parking lots:

How does IR Lighting help with illumination?

IR lighting emits infrared light, which is invisible to the human eye but can be detected by camera sensors. By supplementing existing lighting sources with IR illumination, ANPR cameras can capture clear and accurate images of license plates even in challenging lighting environments where visible light may be insufficient. This enhances the overall visibility and image quality, allowing the ANPR system to reliably read and process license plate information regardless of lighting conditions.

Additionally, IR lighting helps minimize disturbances to nearby residents or drivers, as it is invisible and does not produce glare or excessive brightness. Overall, IR lighting plays a crucial role in enhancing the performance and effectiveness of ANPR camera setups, particularly in low-light or nighttime scenarios.

Many cameras come equipped with built-in IR capabilities. It’s important to ensure that the camera’s IR distance parameter is well-suited to the distance between the camera and the vehicle being monitored. This ensures that the IR illumination adequately covers the area where license plates are captured, enabling clear image capture for ANPR systems. 

However, in some cases, the built-in IR may not be sufficient to provide optimal illumination, particularly in larger or more challenging environments. In such situations, you may opt to purchase external IR units to supplement the camera’s built-in IR capabilities.

These external IR units can provide additional illumination, extending the effective range of the ANPR system and ensuring clear and accurate image capture, especially in low-light or nighttime conditions where visibility may be limited.

ANPR Camera Lighting for Highways

Highways, on the other hand, need different light requirements since cars are moving at high speeds. The lighting needs to provide sufficient illumination to capture clear and accurate images of license plates despite the fast-paced movement of vehicles. You can try doing the following:

The lighting setup for highways prioritizes high-intensity, uniform illumination to facilitate clear image capture of license plates, enabling ANPR systems to operate effectively in fast-moving traffic environments.

<p>The post Best ANPR Camera System Setup first appeared on NVR IPCAMERA SECURITY.</p>

Once you have the NAS setup you can come back to this post and follow the steps below:
.

Step 1: Login to your Synology NAS via a browser​

Step 2: Click the Package Center icon​

Step 3: Search for and install the Surveillance Station software (it should be on the home page of the package center, if not you can use the search bar to find it)​

Step 4: Click the Synology main menu at the top left of your screen and open the newly installed Surveillance Station software​

Step 5: Click the IP Camera icon​

Step 6: Click the add button when the new window open and then click add camera from the drop-down​

Step 7: Select Quick Setup and then click the next button​

Step 8: Enter the camera details manually or click the Search icon next the IP Address box​

Step 9: Check both the Synology Supported Cameras and ONVIF lists (some camera models are not directly supported by Synology, but as long as the camera is ONVIF compliant you should be able to add it to the Surveillance Station software)​

Step 10: Select the camera you want to add from one of the lists and click OK​

Step 11: Check that all the camera details are filled in, including the cameras username & password (also give the camera a unique name to help you identify it from other cameras)​

Step 12: Click the Test Connection button and if the test is successful you’ll get a green tick and a live shot from the camera, you can then click Finish and the camera will be added to your Synology NAS​

If the test is not successful you will have to go back and check the camera’s settings are correct, the most common problem is that the camera has an IP address that is not on your network, after you have followed our instructions from a previous video on how to change the IP address you should get a successful connection and be able to add the camera.

How To Install Synology Surveillance Station

Read Also : Dahua NVR Troubleshoot All Series

.

If you need more help with installing Surveillance Station and adding an IP Camera to your Synology NAS you can watch this video:

.

Synology NVRs and VisualStation​

NVR1218, DVA1622, DVA3221, VS360HD

NVR’s (Network Video Recorders) are a neccessary part of any security setup.
They work to store, playback and support the live feed of security footage from connected IP Cameras, and with Synology, can offer even more.

.

Offering a range of Network Video Recording solutions, from their energy efficient NVR1218, and compact VS360HD, to their deep learning, AI powered DVA series, Synology’s selection of NVRs were designed to appeal to a range of different users and applications.
At Use-IP you can now choose from these four Synology NVRs and decide which is best suited for your needs.
​

.

.

​

NVR1218​

The Synology NVR1218 is a 2-Bay (Reaching a max. of 7 bays, with an Expansion unit) Network Video Recorder, able to support a max. of 12 IP camera channels.
Its design is also fit for a PC-less experiance (only needing to be connected to a monitor) and can be accessed remotely, via Synology’s Surveillance Station, or, DS cam mobile application (allowing for Live view, playback, adjustments, and notifications, on a mobile device).

Key Features:
.

.

.

​

​

Deep Learning NVR (DVA) Series​

The Deep Learning NVR Series combines the Management features of Synology’s Surveillnace Station, with Advanced Analytics, designed to fit deployments of all sizes.
Intelligent Analytics – Included in DVA NVRs to strengthen on-premises security, offering deep learning algorithms and detection profiles
.

Users can choose between the more compact design of the DVA1622, or the larger storage of the DVA3221, the key features of which are both listed below.
​

DVA1622

DVA3221​

.

The DVA Series NVRs also come equipped with the use of Dynamic Maps, allowing for improved situational awareness, and to help users to determine camera/event locations, and provide instant access to video feeds for more efficient site monitoring. This also includes the features listed below:​

.

.

VisualStation

VS360HD
​

Synology’s VisualStation offers a PC-less, live view and playback solution, for your surveillance footage, with the ability to work in mobile environments.
Designed to work as a companion system, the VisualStation also offers an ultra-compact design, and features Synology SurveillanceStation live view and management tools. It is a perfect alternative for a Video recording solution, for users facing budget or space constraints.

Key Features:
.

How It Works:
Plug in an Ethernet cable, connect the VisualStation to a LCD-monitor or TV, log into the Synology SurveillanceStation – and its all set up, for quick and easy use.
.

The VS360HD is also equipped for use in harsh and mobile environments. With a design free from mechanical moving parts, the VisualStation is more resistant against vibration and hardware failure, than other Network Video Recording solutions.
Its design also features a solid outer case, built to keep it running in industrial temperature ranges (-20°c ~ 50°c)
This is what makes the Synology VisualStation both a cost effective, and reliable system, for any user.

.

Synology NAS/SAN Systems​

Synology’s Data Storage/Management Systems come in a range of styles and sizes, each designed to fit different user needs. Being able to appeal to a range of users and suitable for numerous applications, Synology’s NAS/SAN Systems are an ideal addition to any personal data management, business data management, or security setup.
Choose from Synology’s range of NAS types; RackStations, DiskStations, FlashStations, and more.​

What is a NAS?​

NAS = Network Attatched Storage.
A NAS is a device that provides users with a networked location to store their data, and are designed to be equipped for use at home or for businesses (or other applications).
But a Synology NAS has even more to offer, as they are designed to offer private cloud storage, backup systems, and secure file sharing.
​

Benefits For Home Use

The DiskStation Manager 7.0​

The DiskStation Manager is the operating system for Synology NAS systems, it was designed with focus on reliability and impressive performance, and offers users a wide range of data management features.​

Users can also feel secure when using their Synology NAS, as the DiskStation Manager offers Secure Sign-in, with app-based login approval, hardware security keys, and 2-factor authentication options. Keep your data, and your data management, as secure as possible.

.

Data Backup Solutions​

With the DiskStation Manager as its operating system, a Synology NAS will also offer users a selection of effective and reliable backup solutions, which include:
.

Active Backup for Business
Expands user data protection with agent-based Linux backup, possible for five major distributions, and AES-256 encryption.

Active Backup for Microsoft 365 / Google Workspace
Maintain offsite copies and restart backup tasks in a different location.

Hyper Backup
Protect data with backup support for DSM settings and 12 additional software packages.

Synology C2
Synology’s Cloud Storage Solution
Back-up NAS data to the cloud (with Hyper backup), and, sync requested data between C2 storage and branch offices (with Hybrid share)
​

Synology NAS Systems also include the Btrfs File System, that allows for even more backup solutions, so users can keep their data as secure as possible (keeping data safe even in the event of data corruption or system failure). These Solutions include:
.

.

.

.

Synology’s NAS Lineup
Now Avaliable at Use-IP​

​

RackStations​

A selection of Rackmount style NAS Systems.
Synology RackStations offer impressive performance and large storage space, all in a rackmount design.
​

XS+/XS Series – RS4021xs+, RS3621xs+, RS3621RPxs, RS1619xs+
+ Series – RS422+, RS820+, RS820RP+, RS1221+, RS1221RP+, RS2421+, RS2421RP+, RS2821RP+
Value Series – RS819
.

DiskStations​

A style of NAS perfect for a Desktop application.
Synology DiskStations range from being compact storage solutions for Business environments, to being an ideal starting point for Home users.
.

​

XS+/XS Series – DS3622xs+, DS1621xs+
+ Series – DS220+, DS420+, DS620slim, DS720+, DS920+, DS1522+, DS1621+, DS1821+, DS2422+
j Series – DS220j
.

FlashStations​

Synology’s FS Series, with an All Flash Array, Rackmount design.
Synology FlashStations offer uncomromising performance, and solid-state drives. Perfect for more demanding applications, and to accelerate Business operations.
.

FS Series – FS6400, FS3600, FS3400, FS2500

.

SA, HD, and, UC Series​

All in a Rackmount style, these NAS systems appeal to a range of storage requirements.​

SA Series – Offers a Scalable storage solution (ideal for enterprises) with high-performance and capacity requirements. – SA3600, SA3400, SA3200D
HD Series – Offers a High-density SAS Storage server, designed for Rapid data scaling, optimizing operational efficiency, and IT infrastructure.- HD6500
UC Series – Offers a dependable high-avaliability SAN Storage solution, fit for iSCSI and FC environments. – UC3200

.

.

​

Expansion Units​

Synology NAS/SAN Systems can also be expanded, with compatible Synology Expansion Units.
Increase your storage space by adding additional drive bays, using a range of Expansion Unit models, also avaliable at Use-IP

FX2421 – Expansion for FS6400, FS3600, and, FS3400
RX6022sas – Expansion for HD6500
RXD1219sas – Expansion for SA3200D and UC3200
DX1222 – Expansion for DS3622xs+ and DS2422+
RX1222sas – Expansion for SA3600 and SA3400

<p>The post How To Install Synology Surveillance Station first appeared on NVR IPCAMERA SECURITY.</p>

How to properly install the security camera?

 When installing security cameras, LongPlus always recommends placing cameras up high. The outdoor installation location should be 7ft away from the ground. Here are the best places to install security cameras around your home: front & back doors, garage & driveway, yard, common areas, main stairway or hallway, or any side doors or large first-floor windows that an intruder could gain access through.

 🟠 Typically, home cameras are placed in the corners of the room to optimize the viewing angle. LongPlus recommends at least two cameras to fully cover a large space, such as a living room. To fully monitor your home, users can add cameras in each room to achieve a complete home monitoring system.

LongPlus Camera User Guide

Read Also : IMOU Ranger IP Camera How To Use

🟠 Battery cameras can not be installed behind a window/glass if you want to use the “Motion Detection” feature.

Battery cameras use PIR (passive infrared) motion detection, an energy-efficient (saving battery power) technology that captures motions by detecting infrared radiation (radiant heat) emitted or reflected by objects. When the camera is mounted behind a window/glass, infrared radiation does not pass through the window/glass. As a result, the “Motion Detection feature” does not work reliably. If you want the camera to detect motions outside, it is recommended that you mount the camera outside.

For plug-in/wired cameras, the answer is yes, as they use camera video analytics rather than PIR sensors to detect motions. As long as they “see”, they can detect motions. So you can mount the camera behind a window/glass with confidence.

How to find the serial number of LongPlus security camera?

🟠 Each LongPlus security camera has a serial number. These are usually located on the body label of the security camera, starting with S/N:*****. Also, if you’ve added your camera to the app, you can also tap the camera “setting” icon > tap the “>” extension icon > tap the “More info” button to find the camera’s serial number.

Is LongPlus security camera waterproof?

🟠 Yes. The waterproof rating of LongPlus camera is IP65. It can be “protected against water jets from any angle”. Generally, the camera can be used outdoors on ordinary rainy and snowy days. However, it may get damaged in extreme weather. But if the camera is installed under the roof or in a place with some shelter, it can get protection to a certain extent. Besides, please don’t expose the camera’s charging port, power button, and microSD card slot to water.

What do the indicator lights on LongPlus security camera mean?

🔵 Solid Blue Light – The camera is working properly.

🟡 Solid Yellow Light – The camera is charging.

🟢 Solid Green Light – The camera charging is complete.

⚪ No Light – The camera is in sleep/off mode.

Can I talk to someone via LongPlus App?

🟠 Yes, LongPlus security camera features two-way audio capability, which means you can listen and talk to someone in real-time with simple clicks in the App.

Do LongPlus security cameras need an app to work?

🟠 Yes! All LongPlus smart security cameras are connected to the LongPlus APP. Compatible and compatible with the latest versions of iOS/Android devices. Installing LongPlus app is a breeze and it comes with voice prompts to guide you step-by-step in minutes.

What is the default language of LongPlus security cameras?

🟠 The default language of LongPlus security camera is set during production and testing in the factory production process. After connecting with LongPlus APP, the language of the camera will follow the language of the APP.

Can I see the infrared light at night?

🟠 No, the night vision infrared light is invisible to human eyes. If you turn on your phone’s camera and point it at the camera lens, then you will be able to see it.

How to format a Micro SD card?

🟠 Sometimes after inserting a Micro SD card, the camera will report “Please use the app to format your SD card first”, that’s because your Micro SD card is not the FAT32 format that the camera supports. In this case, please tap the camera Setting icon > tap SD card > tap Format to format it.

How to record/save videos on a Micro SD card?

🟠 Installing a Micro SD card does not mean the camera will record a video to the Micro SD card all the time.

When the camera detects a movement, it will record a video to the cloud and the cloud recording will display in the Library in the app. If apart from the cloud recordings you want to save backup videos on a Micro SD card at the same time, you can insert a Micro SD card into the camera.

🟠 Here are tips:

1. Find the Micro SD card slot and insert your Micro SD card: Mostly, the Micro SD card slot is next to the power button and is under the rubber plug of the camera body. However, for some models of cameras, you may need to take off the outer shell of the camera to find the Micro SD card slot.

2. If the Micro SD card is detected, you will hear “SD card detected” at the time when it is inserted, and you can see both the storage of the Micro SD card and “SD Card Video” in the app.

Please note that the camera only supports legitimate brand-name (SanDisk, Samsung, Kingston) Micro SD cards, but may not be able to support no-brand, fake, expansion (the storage is extended), and read-only (you aren’t able to put a file to it) Micro SD cards

How to view videos on the Micro SD card?

You can view videos on the Micro SD card from the app or on your computer.

To view videos on the Micro SD card from the app, please tap the camera “setting” icon on the app homepage > tap “SD card video” on the “Camera Setting” page > select the date on the top > swipe the screen left and right until the green vertical line overlaps the grey “bubble”( If there is no grey “bubble”, that means there are no motions detected in that period).

If you want to zoom in on the specific time before playing a video, you can swipe two fingers left and right at the same time or tap the “magnifying glass” icon.

How to activate cloud storage?

🟠 The cloud storage we gift you is automatically activated and contains free 3 days rolling cloud storage. You can view the cloud-stored videos in the last 7 days at any time.

When the SD card is full will it overwrite the older files?

🟠 Yes, when the SD card is full, the camera will delete the earlier recorded video so you don’t need to format the SD card manually.

Can the camera be used without a memory card?

🟠 Without a memory card, the recorded video will be automatically saved in the cloud, you can watch the video for nearly 7 days in the cloud.

How long does it take to charge LongPlus camera once?

🟠 It will take about 8 -15 hours to fully charge the camera once. When the security camera is fully charged, the indicator light will turn solid green.

Why can’t the battery be charged?

🟠 The following factors may cause charge failure. Please check them one by one:

(1) The charging device is not suitable, or it malfunctions. Please make sure the power adapter and charging cable are in good condition. The power adapter specification is “5V/1.5A”.

(2) The charging port is defective. Possible causes include: the Micro USB cable and the charger or the charging port of the camera are not plugged in properly; there are objects in the charger or the charging port of the camera.

(3) Please confirm whether there are objects in the camera’s charging port or the charger port and clean it before charging.
Please ensure that the Micro USB cable is in good contact with the ports on both ends of the charger and camera.

(4) You can try to connect the Micro USB cable and the charger to other devices (such as mobile phones or computers) to see if they work normally. If anyone doesn’t work, please change to a new one to try again.

(5) The long-time operation leads to charge port oxidation or internal looseness. Please repair or replace the charge port immediately.
The charging cable is damaged or broken. Please replace the Micro USB cable that can work normally.

(6) The charging cable should not be too long. The required cable length is generally not more than 16 feet (5 m). Please replace the Micro USB cable with a suitable length.

(7) The charging environment is not suitable; excessively high or low temperature makes charging impossible. Please move to a place with an appropriate temperature environment (0°C ~ 45°C) for charging.

If the above are ruled out but the issue still persists, please submit feedback from the app for further technical assistance.

Why can’t the battery be used for a long time?

🟠 The battery life mainly depends on the total working duration of the camera. The following factors may lead to fast battery consumption. Please check them one by one:

1. Users frequently view live streams/The camera is frequently activated to record videos.
In order to make the camera work longer, please avoid turning on the live broadcast for a long time.

2. Poor Wi-Fi connection to the camera
If the camera’s Wi-Fi connection is bad or unstable, it will continue to actively search for networks, so the battery will drain quickly.
Please try to place the camera near the Wi-Fi router. Thick walls, bricks, ceramics, electromagnetic equipment, large amounts of liquid, and large metal objects can interfere with Wi-Fi signals. Please try to avoid these objects.

3. Extremely cold weather shortens battery life
The operating temperature of the camera is -10°~45 °C. Please do not place the camera in an extremely cold environment.

4. Night Sight will consume more battery power
When you enable Night Sight, the camera will enter night mode when the light is darker than the threshold (sensitivity level). Camera performance is improved when it is dark.
Therefore, for sharp nighttime images, we don’t recommend disabling it, although it may drain more battery power. But if you still want to disable it, you can tap the camera “Settings” icon > tap “Lighting Settings” > close “Night Sight”.

How can I extend the battery life?

🟠 The battery life is largely determined by the number of recordings and the number and duration of live. Here are the suggestions to extend the battery life:

(1) To reduce false triggers. Change the location or angle of the camera. Please allow us to explain how motion detection works: when the PIR sensor perceives a change in the environment, motion detection will be triggered. The change in the environment can be a moving object, light change, the alternation of hot and cold air, etc. Particularly common false triggers include trees shaking after being blown by the wind, the cold air of the air conditioning, etc.

(2) Set motion detection sensitivity to Low or Medium. After doing that, the distance the PIR sensor can detect will become shorter so that false triggers may be reduced.

(3) Shorten the recording duration of the camera. Currently, the camera-supported recording durations are 10 seconds, 15 seconds, 20 seconds, and automatic (up to 3 minutes). For your reference:

(4) Set Sleep mode. This feature allows you to schedule the working hours for the camera. Whether the camera enters sleep mode on schedule, or you enable Sleep, the camera will be deactivated. Under this condition, the live feed will not be accessed, motion detection (including push notifications, recordings, and camera alarm) will stop working. This can reduce power consumption to save battery life.

(5) If possible, you can try to watch live feeds or adjust camera settings on your mobile phones less frequently.

(6) To avoid or reduce the battery consumption caused by poor network connection. You can place the camera as close to the router as possible, and try to avoid thick walls, bricks, ceramics, electromagnetic wave equipment, a large amount of liquid, and large metal objects.

(7) We suggest that the camera be installed in a suitable temperature environment (14°F~113°F).

(8) It is generally not recommended that you turn off night vision, but if you do not need to monitor at night (watch live and video), you can turn off night vision.

Will Wi-Fi environment affect the camera battery?

🟠 Yes, an unstable or poor network environment will cause the camera to transmit data multiple times, the camera keeps actively searching for the network, or even reconnect to Wi-Fi continuously, which will result in faster battery consumption. Multi-layer concrete walls, brick walls, and overcrowded Wi-Fi channels will cause a bad Wi-Fi environment.

To save the camera’s battery life, please ensure that the network connection is strong.

How to charge the camera?

🟠 Connect the Micro USB cable to a 5V/1.5A power adapter.

🟠 Connect the other end of the USB cable to the camera.

🟠 Plug the power adapter into an electrical outlet.

🟠 Use the solar panel to charge.

Battery cameras can be used after being fully charged

How to add users or share your camera with another person?

Once you add a camera to the app, you become the admin of the camera. If you want to add an additional user to watch the camera on multiple devices, let’s say, you want to make another person (your family member or your friend) be able to access the camera on his or her phone, you can share your camera with that person.

🚩Note:

The shared user needs to download the app and register a new account first and the shared user will need to select the same country as you when registering.

Please check if shared user is in the same country/region as you. Click your/shared user avatar to go to “Personal information” >> check “Country” to see if you are in the same country.

If not, maybe you/shared user need to delete the account and re-register by selecting the same country/region to make sure you are in the same country. Click “Account security” >> select “Delete”, then you/shared user can re-register.

Below are the sharing steps:

Face to Face Sharing

Step 1 Generate the share QR code of the camera

The camera admin taps the Share icon () on the live window on the homepage or taps the Share button on the Camera Setting page, then taps the Camera sharing button to generate a share QR code of the camera.

Step 2 Scan the share QR code using the shared user’s phone

The shared user taps the + icon () on the top right of the homepage, then taps the Add Friend’s Camera button. He/she can also directly tap the Add Friend’s Camera button from the User page. Then scan the generated share QR code.

Step 3 Accept the camera access request

After successfully scanning the share QR code, the camera admin will receive a guest user request. Accept the guest user request, then the shared user will be able to see the camera on the homepage and access the camera. The Person icon indicates this is a shared camera. The camera admin can check the shared account on the Share page.

.

Remote Sharing

Step 1 Generate the share QR code of the camera

The camera admin taps the Share icon () on the live window on the homepage or taps the Share button on the Camera Setting page, then taps the Camera sharing button to generate a share QR code of the camera.

Step 2 The camera admin screenshots the share QR code and then sends it to the shared user.

Step 3 The shared user saves the screenshot.

Step 4 Scan the screenshot of the share QR code using the shared user’s phone

The shared user taps the + icon () on the top right of the homepage, then taps the Add Friend’s Camera button. He/she can also directly tap the Add Friend’s Camera button from the User page. Then tap the Picture icon on the top right and then choose the saved screenshot to scan.

Step 5 Accept the camera access request

After successfully scanning the share QR code, the camera admin will receive a guest user request. Accept the guest user request, then the shared user will be able to see the camera on the homepage and access the camera. The Person icon indicates this is a shared camera. The camera admin can check the shared account on the Share page.

.

.

<p>The post LongPlus Camera User Guide first appeared on NVR IPCAMERA SECURITY.</p>

How to connect a Uniview Cube camera to wifi using a PC

<p>The post Advanced Uniview IP Camera Guide first appeared on NVR IPCAMERA SECURITY.</p>

1, RTSP to add
1、main stream：rtsp://ip address/11
2、vice stream：rtsp://ip address/12
Find “FFMPEG (H264)” this column, fill in information of RTSP in the URL.After adding can test is successful

Go to “Camera” option.

Input your camera ip address, User name and Password, click “Finish”, add camera succeed.

PDF Download : How-to-add-CamHi-camera-to-Ispy-下载

CamHi Pro Tutorial Guide

Read Next : V380 IP Camera Installation Manual

The difference between camhi and camhipro

The camera can use camhi and camhipro app at the same time, camhipro’s interface design is more modern, except for the interface there is no other difference, the functions are the same.

CamHi Instructions for use

The following tutorials are only available for the CamHi app.

How to add the camera

Warm Tip: This product only supports 2.4 GHZ WIFI. Before adding devices, make sure that your router is 2.4 GHZ WIFI, and your mobile phone is connected to 2.4 GHZ WIFI.

First, connect the camera power supply. After about 40S, you will hear the device tinkling sound. If you do not hear the tinkling sound, please press RESET 10S at the device base. If the equipment does not have audio, please judge by time.

Note:

1. Please use the power adapter matched with the camera to avoid damage to the equipment.
2. Don’t plug in wiring for power-on equipment; (After plugging in wiring, you can’t configure WIFI with one key)
3. One-click configuration WIFI only supports some models, and some models do not support one-click configuration WIFI.
4. Box camera, Dome camera and other models use connection hotspots to configure WIFI. See AP connection operation instructions for details.

Wired connection (only applicable to the equipment with internet access)

(1) Please connect the network cable and the equipment cable interface. The other end of cable connects the router, and the camera is on, waits the startup and completes the self-inspection (If you fail to self-check, please press the recovery key for a long time to restore the factory settings.).

(2)Click “add camera” on APP’s main interface to select “add UID by scanning QR code” (QR code above XXXX-XXXXXX-XXXXXX out of the machine body) or “LAN search UID” after the mobile phone connects the WIFI.

(3) Click the modelxxxx-xxxxxx-xxxxx of camera occurred in the camera list.

⑷ Return to the camera list by clicking “√”, then the camera is displayed online, and conduct the preview by clicking the camera.

Wirelss Installation(only for devices with WIFI modules)

After installing the mobile phone software, the mobile phone connects to WIFI, clicks Add Camera >Wireless Installation> Enter WIFI Password >Do you hear the sound? The system will be equipped with WIFI if it has been selected properly. When the WIFI configuration is successful, there will be voice prompt. (If you don’t have audio equipment, please see the picture prompt)

(1) Network Camera in Network; Select the corresponding UID

(2) Enter the camera password (the default password for the camera is admin).

(3) Click the completion button in the upper right corner to complete the addition of the camera.

Hot-spot connection (only suitable for devices with WIFI modules)

(1) The camera is powered on and waits for the completion of the self-inspection (if it fails to do so, press the recovery key for a long time to restore the factory settings).

(2) Open the WIFI search, choose the name of WiFi beginning with IPCAM-xxxxx, and enter the original password 01234567 (if you change your password, enter your modified password) as follows:

(3) After successful connection, the method of use is the same as that of wired connection.

4G Connection (only for devices with 4G modules)

(1) 4-G hot spot connection is shown below. After completing the 4-G hot spot wireless connection, the second step of Anzhao wired connection method begins to connect the device, close WiFi, open data flow, click on the device to connect, or scan the serial number of the fuselage (SN two-dimensional code above the fuselage) to connect, click on the camera to preview, such as Figure:

Function introduction

Introduction to real-time preview interface

1.Mirroring inversion + picture reversal

2.Lens zooming-in+ zooming-out and focus

3.Setting and invocation of presetting bit

4.Camera mode (infrared mode +full-color pattern + intelligent model)

5.Off

6.Sound opening and speech pattern

7.Quick photo

8.VCR

9.HD model

Cloud deck and presetting

1. Cloud platform control

⑴ Click the sliding screen on the real-time watching interface to control the camera rotation.

2. Presetting

⑴ Click the presetting icon and enter the presetting management interface.

⑵ Add the presetting: Several presetting could be added with the limit of 255.

⑶ Delete the presetting: Edit the set presetting by clicking.

The preset shortcut command table

PTZ Dome Camera Instruction List

2.5 Inch WI-FI Dome Camera Instruction List

Function	Mode Of Operation	Function	Mode Of Operation
Camera universal address	Address code 255	group first cruise preset 1-8（Dwell time 5 seconds）	Call 65 Preset
Enable Preset cruise line	Call 71 Preset	group second cruise preset 9-16（Dwell time 10 seconds）	Call 66 Preset
A cruise preset for 4 seconds	Call 75 Preset	group third cruise preset 17-24（Dwell time 15 seconds）	Call 67 Preset
A cruise preset for 8 seconds	Call 76 Preset	group fourth cruise preset 25-32（Dwell time 20 seconds）	Call 68 Preset
A cruise preset for 10 seconds	Call 77 Preset	group fifth cruise preset 33-40（Dwell time 30 seconds）	Call 69 Preset
A cruise preset for 15 seconds	Call 78 Preset	Group sixth fourth cruise preset 41-48（Dwell time 60 seconds）	Call 70 Preset
A cruise preset for 20 seconds	Call 79 Preset	group seventh cruise preset 49-56（Dwell time 90 seconds）	Call 72 Preset
Set the limit point A left	Call 91 Preset	group seventh cruise preset 57-64（Dwell time 120 seconds））	Call 73 Preset
Set the limit point B right	Call 92 Preset	clear all of the presets	Call 77 Preset
To enable A, B two scans	Call 93 Preset	Start A ,B Low speed scan	Call 87 Preset
To clear A, B two scans	Call 94 Preset	Start A ,B medium speed scan	Call 88 Preset
A 360 – degree scan, and A, B two scanning speed	Call 65、66、67、68 Preset,  the corresponding rate of 3, 6 degrees per second, 9, 15 degrees and 40 degrees	Start A ,B fast scan	Call 89 Preset
clear all of the presets	Call 60 Preset	clear all of the preset	Call 90 Preset
360 degree scans  （Only applicable few model）	Call 99 Preset	Restore the factory	Call 94 Preset
Forced light off （Only applicable few model）	Call 88 Preset
Forced light on  （Only applicable few model）	Call 89 Preset
Auto control light  （Only applicable few model）	Call 90 Preset
Restore the factory	Call 96 Preset

Video playback and Download

Warm Tip: To watch and download remote videos, SD cards need to be inserted, while local videos are saved in the APP installation device.

1. Select the local or remote video to play, and control the playback speed. For example, select the local video, as shown in the figure:

2. Remote Video Download

Click on the video file in the video list interface, then click on download, the video file will be downloaded automatically. The downloaded video file will be saved in the local video-download interface. After the video download is completed, you can click on continue to download, continue to download other video files, or click to view, and automatically jump to the download record. Like an interface.

3. Remote Video Search
   In the video list interface, Search options are available to Video file length: 15-900 seconds can be set, default is 600 seconds.

select the video search range as needed.Note: Set the setting range on the reference software interface.

Note: Some models only support 15-600 seconds.

Alarm Setting

1.open the Alarm Setting

2.The Level settings;

High: Sensitivity value is more than 75;

Medium: Sensitivity value is about 50

low: Sensitivity value is less than 25.

Action with Alarm

1.Alarm Notification

Choose to turn on, indicating that the alarm will send a push message to the mobile phone.

2.Alarm SD REC

Select Open to Save Alarm Video to SD Card

3.E-mail Alarm with Pictures

Select to open, indicating that the alarm sent pictures to the designated mailbox

4.Save pictures to FTP server

Select Open to save alarm pictures to designated FTP server

5.Save videos to FTP SERVER

Select Open to send alarm video to designated FTP server

6.Picture num

Picture capture number 1-3 can be set up (part of the model support)

7.Set alarm ringing linkage

Choose to turn on, indicating that the camera will give an alarm sound when alarming, the type of sound, the duration of the call can be selected (part of the model support)

FTP Setting

1.Server Address：Fill in the erected FTP address.

2.Server Port：Fill in the port of FTP.

3.User Name and Password Fill in User Name and Password Setted in FTP Server.

4.After filling in, click the APPLY; finally, you can click the TEST FTP SETTOMGS to check whether you can send the picture to the FTP server.

Audio Setting and Video Setting

1.Audio Setting

⑴Linear input and microphone input settable.

⑵When the audio input type is microphone input, the input volume and output volume are 80 and 95, respectively, and some models are 14 and 9.

⑶When the audio input type is linear input, the input volume and output volume are 10 and 95, respectively.

2.Video Setting

⑴Bit Rate

The rate of the first bit stream and the second bit stream of the device can be customized.

⑵Frame rate

Frame Rate of First and Second Bit Streams of Customizable Devices.

⑶Image quality

1-6 can be set, default is 1, the smaller the value, the better the image level, the larger the bit stream.

⑷Video format

50 Hz and 60 Hz settable.

Email Setting

Send e-mail to QQ e-mail as an example:

1. Smtp Server: smtp.qq.com

2.Server port: 465

3.Encrypt Type: SSL

4.User Name and Password Fill in QQ Account and Authorization Code

5.Send To: Mailbox for Receiving Alarm Pictures.

6..Sender : Sender’s mailbox address, here is QQmailbox, for example.

QQ mailbox address should be filled in; (same as user name).

7.Subjects and information can be filled in at will.

8.After filling in, click the application button, and finally click the test button.Check if you can send an alarm message.

Local Picture

1.Click on the icon and enter the local picture sub-ID of the picture playback interface to save the click Edit to delete the picture.

2.Select the image you want to delete and click the button.

Camera Setting

Manual Download

PDF Manual Download : CamHi Instructions for use – Camhi下载

Camera list display mode

Click the camera list interface icon  to select the camera list in large or small image mode.

Sidebar settings

Click the camera list interface button, or swipe the screen to the right in the camera list interface to enter the APP sidebar. The APP name is displayed on the sidebar. the below displays APP version.

• Local file

Click Local File to enter the local file interface. This interface displays all the local videos and pictures saved by this camera on this phone. Click on the file to playback the video file or view the local picture. Click the Edit button to delete the file.

• More

Click the More button to check whether the APP has obtained the notification permission of the mobile phone. If the display is not enabled, the APP cannot send the alarm push message. Clicking enabled, you can jump to the setting interface to open the notification permission.

Video/Image search and view

Local recording playback and download

Find the camera to be viewed in the camera list interface, click the icon, select the recording page, the recording file will be displayed, you can sort according to the size and length of the video file, click the button, you can save the video file to the mobile phone album. Click the edit button, it can delete the selected video file.

View local snapshot images

Click on the image page in the local file interface, the local snapshot images will be displayed, the images will be sorted according to the capture time, click the preview thumbnail to view the image, click the button, you can delete or save the image to the album.

Remote video playback and download

Remote video playback

Click the button “camera list interface” to enter the remote recording list interface. The APP searches for the last 6 hours of video files by default. You can customize the sorting according to the recording time, click the video file, and then click play to playback the video files in the SD card of the device.

Remote video download

Click on the video file in the recording list interface, and then click Download, the video file will be downloaded automatically. The downloaded video file will be saved in the local recording interface. After the video download is completed, you can click to continue downloading, continue to download other video files, or click view, will jump to the local recording interface automatically.

Remote video search

Click the button on the recording list interface, the search option appears, you can select the recording search range as needed.

Search time range is optional

Function settings

When the camera is online, click the camera list interface or the live interface icon to enter the camera parameter setting interface.

Basic settings

Wifi settings

Display the WIFI network connected to the current device

Click to get the wireless network around the device, the device will search for the WIFI network in the current environment automatically; select the password to configure the WIFI of the current device.

Change password

The access password of the camera can be modified. When ticking display password, the password will be visible.

Alarm settings  

Alarm management and notification

• Alarm push

Select On to indicate that a push message will be sent to the phone when alarming.

• Device alarm

1.Motion detection alarm

Select On to indicate that the device has enabled motion detection. Clicking adjust motion detection, it can draw motion detection area and adjust motion detection sensitivity (This function is suitable for some models.)

2.Sound alarm

Select On to indicate that the device with microphone function. When the surrounding sound is greater than the intensity of the device check sound, trigger an alarm, click to adjust the sound alarm, you can adjust the sound alarm sensitivity

Alarm Linkage

• Alarm capture to SD card

Select On to indicate that the alarm capture picture is saved to the SD card.

• Alarm recording to SD Card

Select On to indicate that the alarm recording file is saved to the SD card.

• When the alarm is triggered, the device issues a siren

Select on to indicate that when alarming the camera will sound an alarm. Siren type and the duration of the siren is optional

Email alarm linkage

Select On to indicate that the device will trigger the alarm and send a picture to the mailbox. Click Configure Email to set the mailbox information.

Send an email to the QQ mailbox as an example:

Smtp server: smtp.qq.com

Port: 465

Secure connection: SSL

Username: QQ number of the outbox

Password: Authorization code of the outbox QQ mailbox

Receiving address: the mailbox that receives the alarm picture

Sender address: sender email address, here is the QQ mailbox as an example, you need to fill in the QQ email address (consistent with the user name). Subjects and content can be filled in casually. After filling out, click the Apply button, then click the Test button to check if you can send an alarm email.

FTP alarm linkage

1.Alarm recording is saved to FTP

Select On to indicate that the alarm recording file is saved to FTP.

2.alarm capture saved to FTP

Select On to indicate that the alarm capture image is saved to FTP.

Click Configure FTP to set FTP information.

Server address: Fill in the erected FTP address

Port: Fill in the FTP port

Username and password: Fill in the username and password set in FTP

After filling in, click the Apply button, then click the Test button to check if you can send an alarm picture to FTP.

Picture capture number setting

You can set the number of alarm capture pictures, 1-3 sheets are optional

This function is suitable for some models.

Audio/Video management

Video settings

• Code rate

Can customize device’s code rate of first code stream and second code stream

• Frame rate

Can customize device’s frame rate of first code stream and second code stream

• Code level

1-6 can be set, the smaller the value, the better the image level, the larger the code stream

• Video system

50Hz and 60Hz optional

Audio settings

• Input volume

Adjust the input volume of the device

• Output volume

Adjust the output volume of the device

SD Card recording and capacity

SD Card plan recording

• Whether to enable recording

Select on, the device will save the recording to SD card

• Recording file time

Can adjust the length of each recording file manually.

• Recording time period

1.Simple settings

Select Simple settings, the recording time period defaults to Monday-Sunday full-day recording.

2.Advanced settings

Select advanced settings to customize the time period for each day of recording manually

Enter the advanced settings interface, click the quick edit button, select the time period to be recorded, you can customize the recording time period; edit it, clicking the Finish button to save the settings.

SD Card settings

Can view the total space and free space of the device SD card, can format SD card

System settings

Device time settings

1、Synchronize device time to phone time

2、The device time zone can be set. After the time zone is set successfully, the device will restart automatically.

Initial settings

• Restart the device

The camera will restart after clicking

• Restore factory settings

The camera will reset after clicking

Device information

Can get the device information of the camera: including device name, device type, Network type, number of user connections, software version, IP address, Subnet mask, gateway, DNS, etc.

Check for updates:

After clicking, the camera will check the firmware version automatically. If there is a new version, it will prompt for updates, click to upgrade online

(This function is suitable for some models)

Function description of live broadcast interface

Ordinary camera interface

The ordinary camera monitoring interface is displayed in the small screen mode by default. The function selection button is displayed at the bottom of the screen. More function keys can be called to slide to the left in the blank space. The function description of the buttons is shown in the figure below.

Note: Some functions require device support

PTZ function:

For devices with PTZ function, use your finger to swipe the live video, the camera will rotate according to the direction of the finger.

Exit the live interface:

Press the blank space and pull down on the small screen interface or click the back button to exit the live interface.

Panoramic camera interface

The panoramic camera will have different live broadcast interfaces depending on the model. It subjects to the connected model. The key function description as following:

Exit the live interface:

Press the back button to exit the live interface

View the camera

After adding the camera for a few seconds, wait for the camera to connect to the camera automatically, prompt the online description to view the camera video, click on the camera that displays online to enter the camera live interface.Camera status description:

Connecting: At this time, the camera is establishing a connection with the network camera. According to different networks, the connection time is different.

Online: This status indicates that the device is connected properly; click to view the video;

Not connected: This status indicates that the device is offline

Password error: This status indicates that the camera login password is wrong. Clicking on the camera in this state will pop up the Change Password dialog box.

Add camera

Install the APP, connect the mobile phone to the WIFI network, enter the APP and click the Add Device button to enter the Add Device interface. If it is the first time to use or restore the factory settings: the camera is not connected to the network, clicking the new device; the camera that has connected to the network, clicking on the device in use

New device add

After clicking the “New Device” button, power on the device, wait for about 30 seconds, confirm that the device is working, click next.

Connected to Network cable

If the device is connected to the network cable, click the “Connected Network Cable” button, the APP will search for the UID of the device in the current LAN automatically. Selecting the UID to be added and click the Add button, the device will search for the nearby WIFI signal automatically to enter the wireless configuration interface. Enter WIFI password, click “Configure wifi and add”, after WIFI configuration successfully, jump to the device list interface; if you do not want to configure WIFI temporarily, click the “Do not configure, directly add” button, adding camera fter confirmation.

Un-connected to Network cable

If the device is not connected to the network cable, click the “Un-Connected to Network Cable” button to enter the interface for selecting the network type.

Sound wave configuration network support equipment: PTZ Camera, Card type camera, Bulb camera, Small flying saucer camera, etc.

AP configuration network support equipment: Box camera, PTZ Camera, Speed dome camera, Big flying saucer camera, etc.

Sound wave configuration network

When the power is turned on, the device will enter the waiting state, and the device will send out a “beep” sound intermittently. Click Next to scan the QR code of the device UID number with the mobile phone. If there is no QR code, click Skip. Enter the password of the WIFI signal to be configured, click to start the sound wave configuration, the system will configuration WIFI automatically. After WIFI configuration successfully, there is a voice prompt

AP configuration network

When the network cable is not connected, turn on the power, click to add, the APP will search for hotspot signals of nearby cameras automatically. The hotspot format is IPCAM-XXXXXX, the password defaults to 01234567. Selecting the hotspot of the camera to be added, clicks connect. After connecting successfully, enter the device add interface, click Add, enter the wireless configuration interface, enter the router’s WIFI password, click “Configure wifi and add”, after WIFI configuration  successfully, jump to the device list interface; if you do not want to configure WIFI, click the button ” Don’t configure, add directly”, add camera after confirmation.

Note: AP configuration network needs to open the phone’s GPS function first.

Add device in use

Scan QR code

Generate a QR code by using the online QR code generation tool, and then scan the QR code through the mobile APP to scan and add.

Search for nearby devices

1、Click the button “Search for nearby devices” to search for the ip camera in the wireless network where the phone is located, and select the corresponding UID.

2、Enter the camera password (the camera default password is admin)

3、Click the button “Add” to add a camera.

Delete camera

In the device list interface, long press the camera to be deleted or click the button “setting” to enter the camera setting interface, click the button “delete device” to delete the added camera.

1. Setting motion detection

If you want to monitor a zone fixed, when the zone has exception, it enables alarm, you can choose motion detection function. Settings like below.

The equipment can support 4 zones setting, you can enable it through tick the option box at the bottom of page. When enable a zone, the zone box will display on the screen, and list zone number, moving mouse to this zone box, you can drag the box to any position; also can move mouse to red box at the bottom right corner, drag it to change the size. After setting, click apply, motion detection will take effect.

2. Setting alarm Linkage

When alarm triggered, the equipment will alarm with many ways, as shown in below picture:
send alarm and pictures to email
send captured pictures to assigned FTP server
send video recording to assigned FTP server
capture a picture, then save to TF Card
Recording a video for 15 seconds, then save to TF card (including 1-3 seconds warning before video)
linkage Preset: after the alarm, call preset
alarm capture quanity, setting as required (1-3 pieces)

If you want set Email alarm, please tick ”E-mail Alarm and Send with Picture”. and then click “Email setting”

3. Setting Email

The items in above picture is mandatory fields need to fill in. If the filled content is not qulified, the setting will not be successful. After writing completed, click Apply firstly, then testing, it will reminder testing successfully when finished.

Note:

1. The server of sending email should support POP3 protocol. In order to strengthen security and reduce spam, Many mail server closed this protocol at present. So users need to check if the server support POP3 before choose mail server, otherwise the mail can not send successfully.
2. For some mail server using SSL certificate, it must enable SSL option, then can send email successfully.
3. Some mailboxes require additional security settings, such as Gmail messages, you need to log in to your google account, open to allow less secure apps in “Sign-in & security” page.

If your Gmail mailbox opened “2-Step Verification”, then you need to set up a separate “app passwords” for camera login,

How to set up “app password” you can click on the “Learn more” to get help

If you do not know the security settings of other mailboxes, we recommended use Gmail.

4. Setting alarm time

The equipment will trigger alarm only after detected alarm in protection period. So you need to select which time to set protection carefully.

Note: When setting time, please adjust system time firstly.

How to set alarm to upload pictures and video to the FTP server

1. Setting motion detection

If you want to monitor a zone fixed, when the zone has exception, it enables alarm, you can choose motion detection function.

Settings like below. The equipment can support 4 zones setting, you can enable it through tick the option box at the bottom of page.

When enable a zone, the zone box will display on the screen, and list zone number, moving mouse to this zone box, you can drag the box to any position; also can move mouse to red box at the bottom right corner, drag it to change the size.

After setting, click apply, motion detection will take effect.

2. Setting alarm Linkage

When alarm triggered, the equipment will alarm with many ways, as shown in below picture:

send alarm and pictures to email

send captured pictures to assigned FTP server

send video recording to assigned FTP server

capture a picture, then save to TF Card

Recording a video for 15 seconds, then save to TF card (including 1-3 seconds warning before video)

linkage Preset: after the alarm, call preset

alarm capture quanity, setting as required (1-3 pieces)

If you want set alarm to upload pictures and video to the FTP server, please tick ”Save Picture on the FTP Server” and ”Save Video on the FTP Server”. and then click “Email setting”

3. Setting FTP Server

Note: If using FTP function, you need to apply the user name and password from FTP Server firstly, and apply a certain storage space at the same time, also asking the user have anthority to write and build sub-directory to storage space.

4. Setting alarm time

The equipment will trigger alarm only after detected alarm in protection period. So you need to select which time to set protection carefully.

Note: When setting time, please adjust system time firstly.

Timing capture and timing record of SD card

1.Timing capture

Choosing “save image to SD Card” or “save images to FTP server”, at a regular interval (can be set like above picture), the device will capture images saving to SD Card.

Click “FTP” into set FTP

Note: If using FTP function, you need to apply the user name and password from FTP Server firstly, and apply a certain storage space at the same time, also asking the user have anthority to write and build sub-directory to storage space.

2. Timing record

Video file duration: can set video file duration, default is 600 seconds.

Open video: can choose whether open video to TF Card

Stream: can set recording stream

recording time: set timing recording time as required

then confirm the camera support SD card and insert SD card, as shown in below picture:

How to view pictures card and download video of SD

Click “SD card” button in IE home page of camera.

Page will display the date of picture and video, select date.

Images folder to store pictures, record folder store videos.

Open images folder, click the images file name directly view picture.

Open record folder, click the record file name to download video.

CAMHI IP Camera Port mapping setting method

1. Please setup the IP address to be Static IP address.

2.Please modify HTTP port number.

The device HTTP port mapping to the external network router,
“External ports”: This port is corresponding to the access requirement of outside network
“Internal Port”: port for this equipment
“Service agreement” selects “ALL”
“IP address”: LAN IP address of the camera.

NOTE:
If your router supports UPNP function, you can also use UPNP port mapping automatically.
UPNP stands for universal plug and play, if you started UPNP, once the IP camera was connected into the LAN, it will communicate with the router of the LAN.
It will request the router to open a port to forward its own port. User doesn’t need to log in the router to set the port forwarding.

users in the use of the function, need to confirm a router also is enabled UPNP; Because many router model, not necessarily can very good support UPNP, testing and supporting the router is very good with, or suggest not start the function. At present test and TP-LINK router cooperate good.