SmartPSS/Add Device P2P SPSS2

HomeHow ToSoftware

SmartPSS/Add Device P2P SPSS2

Description This allows you to view cameras on SmartPSS using P2P. Prerequisites SmartPSS SmartPSS Download How to Install SmartPSS SN Num

NEW Jovision CloudSEE Firmware Software Download
Tpsee Topsee Firmware Software And Tools Download
LS VISION firmware software download

Description

This allows you to view cameras on SmartPSS using P2P.

Prerequisites

  • SmartPSS
    SmartPSS Download
    How to Install SmartPSS
  • SN Number of device located on bottom of device recorder. Can also be located from the local menu of the recorder under menu -> system info or from Dahua Web service under Setup -> Network -> P2P
  • P2P must be enabled from the main menu of the recorder under Settings -> Network -> P2P or from Dahua Web Service under Setup -> Network -> P2P.

Video Instructions

Step by Step Instructions

1. Locate the serial number of your NVR or DVR. The serial number can be found at the following locations:

  • On the underside or side of the unit

SmartPSSP2P3.JPG

  • In the web interface, under Info->Version

SmartPSSP2P1.png

  • On the system interface under Main Menu->Settings->Network->P2P

SmartPSSP2P4.png

  • On the system interface under Main Menu->Info->System->Version

SmartPSSP2P5.png

2. Launch SmartPSS and select Device.

AddDevicesSPSS1.png

3. Click Add, change method to P2P.

AddDevicesP2PSPSS2.png

4. Enter credentials, save and then add.

AddDevicesP2PSPSS3.png

COMMENTS

WORDPRESS: 11
DMCA.com Protection Status