This is a user guide for CMSClient version V1.00.00.47, it’s applied to software version is equal or newer than V1.00.00.47. If you are running older version (e.g. V1.00.00.46, V1.00.00.45), please download and upgrade your existing one to the latest. It should be noted that Yoosee has no app be compatible with Windows smartphone. If you have a smartphone running Windows OS, obviously you can not use Yoosee camera. The Yoosee software team will not release App for Windows based smartphone.

What CMSClient does?

CMSClient provides users a centralized video surveillance solution. It allows users to manage multiple cameras simultaneously, users can preview, record, playback, even receive alarm alerts by using it.  Users also can change yoosee camera’s network settings (such as IP address, gateway, DNS), can shift recording video resolution from SD to HD, can modify camera’s password.

Installation of CMSClient software

The software doesn’t contain any virus, if your anti-virus software report virus warning, please check if you have downloaded the software from official website. The software requires permission to access your network/Internet, it uses RTSP stream protocol to communicate with cameras locally, and P2P protocol to communicate with Internet cameras. When installing the software, ensuring it allows to pass Windows firewall.  The software will keep communicating with remote servers intending to establish P2P connection, it doesn’t spy your video, doesn’t transmit/upload any video clips to remote servers.

Logon CMSClient Software

CMSClient software now allows users to login through three different types of account.

• Admin login: local login, don’t require users to register an account. No need to input password, click “OK” to login immediately. The software can automatically discover local cameras, but can not discover Internet cameras.
• Phone Number login: remote login with your registered yoosee account, after logon, the software will list added cameras in your account.
• Mail/user ID login: remote login with your registered yoosee account, after logon, the software will list added cameras belongs to your account.

Moreover, select either “Phone number login” or “Mail/user ID login”, the software can receive motion detection (or sensor triggered) alert to computer. When motion detection alarm occurs, the software will pop-up a new window automatically to alert users, it also can play selectable audible automatically to remind users.

How to add Yoosee Cameras?

After logon, CMSClient will automatically discover local connected cameras, click “Add all” to add them into your software. Please note the displayed p2p password and rtsp password default is “qwe123”, it’s an incorrect password, just ignore them.

Except adding automatically, users can click “+” icon on the left bottom to manually add cameras. In “Device manager” window, local connected cameras will be listed on the left column, click “>>” button can add to software which will appear in right column. Click “Manual add device”, you can add local connected cameras via entering device ID, device password, RTSP password. Click”Add shared device” to add cameras as a guest user. In pop-up windows, you should paste the shared link. To know how to get shared link, you can read this article – How to use Yoosee App’s sharing function?

How to use CMSClient software?

Once you added devices to software, you’re able to use each functions of it. Select device you want to manage, right click mouse will pop-up a menu list.

• Device property: change camera name, device password, rtsp password and group.
• Delete node: delete camera from this list/software.
• Start monitoring: start to preview real-time video (if it shows you a crying face, it means password is incorrect)
• Smooth/standard definition/high definition: before click start monitoring, you should choose default image resolution, smooth equals low resolution, standard definition equals VGA (640×480), HD equals 1280×720 or 1920×1080.
• IPC config: you’re able to tweak camera’s network settings (e.g. IP address, DNS), record video resolution (SD, or HD), password.  It only works on the premise that your camera’s password is correct. If you encounter “network timeout” “permission error” “password incorrect” error, to solve this, you need to logon software with yoosee registered account.

CMSClient Playback Function

You’re able to playback recorded video clips right from your computer. The CMSClient can only allows users to play remotely and locally recorded video clips, but also can allow you convert them to friendly .mp4 files which can be recognized and played by regular media players.

Click “Search” button on the left top, the camera can search files, click the file name to playback. Additionally, you can click folder icon to open a file to play it. All yoosee camera will record video with .av file extension. These raw files can not be recognized or played by regular media players, you can use the converter which the software has included to convert .av files to .mp4 files.

If you don’t want to install and use CMSClient software, still want to play .av files in another computer, you can read this article – How to play .264 video files from IP cameras/DVRs/NVRs?

CMSClient software is a powerful video surveillance management tool, it includes other function to provide a great flexibility. Click gear icon on the top of software, it will pop-up a “CMS config” window.

• File save path: select the folder path to store recorded video footage.
• Reserve space: allowing users to modify reserved space for video storage in your HDD.
• Record time for package: the time length to patch a video file when recording video. If the value is “60” min, the software will patch/generate a video file in every hour when software is recording on computer.
• Cycle record: turn on/off over-write function, automatically erase/overwrite HDD when space is full.
• Auto start record when monitoring: record video while watch video stream.
• Connect all of device automatically: automatically display video for all cameras/channels after logon software.
• Render mode: Directdraw, GDI
• Monitor: auto, rtsp, p2p
• Message notification: choose whether receiving message notification or not when there is a motion detection alarm.

If you logon software with registered yoosee account, the software will have “Alarm trigger” option. This open allows you to select time length of pop-up video when alarm occurs. You’re able to choose different audio files, the computer will play the audio to remind users.

<p>The post User guide for Yoosee App PC Software – CMSClient first appeared on NVR IPCAMERA SECURITY.</p>

Smart Bird Feeder Camera,1080P HD Camera Auto Capture Bird Videos & Solar Panel, App Notify When Birds Detected, Free AI Identify Bird Species, Bird House with Built-in Microphone.

Download Bird Lover app

Download and install the Bird Lover App for either IOS or Android.

Login Bird Lover app

Once downloaded, the APP will prompt you to register your device. Enter your phone number or email address which one makes you feel comfortable and select the country you live in. You will receive the registration code. Input the registration code, then create a password.

Note

Indicator Description

Connect Bird Lover Bird Feeder Camera To Wifi

1. Turn on the Bird Lover Bird Feeder camera power and you will see the indicator light flashing quickly and hear a sound.

.

2. Open the Bird Lover App, click +, select your Bird Feeder Camera (you can choose one at random, the connection is the same), and then follow the instructions of the App.

3. Bird Lover Bird Feeder Camera only supports 2.4G wifi, please make sure your current wifi is 2.4G.
Enter your wifi password, make sure the wifi password and wifi are correct and click Next.

4. Scan the QR code with the Bird Feeder camera. You will hear a prompt sound after a successful scanning.

NOTE: The QR code needs to be aimed at the camera below

5. Wait for Bird Lover Bird Feeder Camera to connect to your wifi, about 60-120 seconds.

Detection settings

1. Turning on or off the “Motion Detection” at the Features interface.

2. Make sure there is an option to turn on notifications.

Click “ME” in the lower right corner, Click the settings button in the upper right corner,Click App Notification.

3. Click “Alarm” to turn on or off. You also can set schedule for “Do Not Disturb Schedule” at the same interface.

Identify live birds

1. Click “bird” icon

2. Click “Gallery”-Click “photo”-Click “bird” icon

Reset Bird Lover Bird Feeder Camera

Press and hold the reset button for 5 seconds to reset the camera.

Bird Lover APP INTERFACE INTRODUCTION

Install Bird Feeder Camera

1. Stick the sticker on the tree or wall and drill holes within the range marked on the sticker.

2. Insert the green plastic screw spacers into the hole.

3. Fix the bracket with long screws.

4. Install the bird feeder and align the three holes underneath.

5. Fix bird feeder with three short screws.

6. Install the perch with the two screws in the package.

7. The bird house can rotate left and right.

How to Charge Bird Lover Bird Feeder Camera?

Bird Lover Bird Feeder Camera FAQ and Troubleshooting

How to get it to connect to two different routers?

It cannot be connected to two different routers at the same time.If you want to change routers, you will need to reset the camera and reconnect your phone and camera. Please make sure that your phone and camera are both connected to the same Wi-Fi network before pairing.

How to reset Bird Lover Bird Feeder Camera?

Why The current network is in poor condition/The APP keeps going round in circles?

The network signal is weak if there are walls between the outlet, router and phone. This is because the network signal is absorbed or blocked by walls or large obstacles. It will help to have strong Wi-Fi with a Wi-Fi extender/booster.

How to charge Bird Feeder Camera?

A solar charging panel integrated into the roof can provide a constant source of power to support the smart bird camera. You can charge the battery of the Bird Box Camera via USB for continuous charging at night and on rainy days.

Why the Bird Lover Bird Feeder Camera battery is drain so fast?

It is low power consumption camera. Plus the solar panel power in charge, it can maintain the daily energy consumption in sunny day. If the battery drains too fast, you should check:

How to identify birds species?

Simply click on the “Identify” icon and the app will identify the bird species and provide a description of the bird. See the manual for details.

Why the recognition result is wrong?

The accuracy of the results depends on the angle and clarity of the bird images.

To ensure a correct result, please ensure that the image is clear enough. The identifying features (bird’s head, tail, wings or pattern on feathers) should not be obscured by obstructions.

The bird should be in the main position in the picture; try to capture the best moment to recognise the bird if the previous recognition accuracy rate is too low; if there are two or more bird species in a picture, the identified result will be the one in the main position.

How many account can connect this Bird Lover Bird Feeder Camera ?

Only one account can connect to Bird Lover Bird Feeder Camera, you can share it with other accounts through the sharing function.

Can I use the Bird Lover Bird Feeder Camera without a TF storage card?

It is not affected for daily use without TF storage card. Without storage card, it can receive notifications, watch in real time, take pictures and record videos (It will be stored in the APP Gallery );

Just can’t record.

Will this camera show video through the app if my phone is 5g?

Yes.

.

<p>The post How To SetUp Bird Lover Bird Feeder Camera first appeared on NVR IPCAMERA SECURITY.</p>

ACH20-1B Thermal Monocular Camera: Using the App

Take some time to learn about using your thermal monocular camera through the companion Thermal Connection app.

Live View Settings

The Live View is the first screen you will see when your camera connects to the app. It includes the following features:

Digital Zoom

Zoom in on a certain part of your camera’s image to magnify details.

1.From Live View, tap .

2.Tap your preferred zoom range.

3.Tap OK to save.

Color Palette

Select your camera’s color palette for enhanced visual representations of thermal imaging.

1.From Live View, tap .

2.Tap on one of the following color palettes:

Note: Not all color palettes are suited for every situation. Select the option that best shows the thermal differences for your specific application.

Record Images & Videos

1.From Live View, tap .

2.Tap the screen to display the capture and record icons.

3.To capture images: Tap .

4.To start or stop recording videos: Tap .

Note: A blinking red dot next to a recording timer on the left of the screen indicates that your camera’s recording.

Function Settings

Enable some of your camera’s features, like the laser pointer, fire detection, or track hot and cold points.

Laser Pointer

Use the laser pointer to illuminate a point of interest with a bright spot of colored light.

 LASER RADIATION:

Exposure to laser light can cause significant damage to the eyes. Never look into the laser beam directly or through a piece of optical equipment.

After a few seconds, the laser pointer automatically turns off.

Fire Detection

Detect fires in your camera’s image with a red box surrounding the source. If enabled, you can set the fire detection sensitivity from high to low.

Hot & Cold Points

Track the hottest and lowest temperatures in your camera’s image at the same time. If enabled, your camera’s image will display a red target tracking the hottest point and a blue target tracking the lowest point.

System Settings

Customize your camera’s system settings or sign out.

Automatic Sleep Mode

Select how long your camera waits before entering sleep mode.

Automatic Shutdown

Select how long your camera waits before turning off.

Change Measurement Unit (Meter to Feet)

Change your camera’s measurement unit.

Sign Out

Disconnect your camera from the app by signing out of the app.

Restore to Default Settings

Restore your camera’s menu and app settings to its factory default settings.

ACH20-1B Thermal Monocular Camera: Troubleshooting

The following article provides some troubleshooting tips for using your thermal monocular camera.

.

Camera’s image/screen is blurry.

Adjust your camera’s diopter to your eyesight. Before you begin, it is highly recommended that you adjust your camera’s diopter to your eyesight. Focusing your view will minimize eye strain and fatigue.

Camera’s Wi-Fi hotspot is not showing.

• Wait a moment for it to appear in your phone’s Wi-Fi settings.

• When enabling your camera’s hotspot in your camera’s settings, try to press  a couple more times.

• Ensure you have allowed the app to use your location, otherwise it will not be able to detect your camera’s Wi-Fi. Navigate to your phone’s settings, then open the Thermal Connection app settings, and enable Location — While Using the App.

Camera is not connecting to the app.

The Wi-Fi password is case sensitive. Make sure you enter the serial number in the same letter format, whether that is uppercase or lowercase.

Camera has disconnected from the app.

Camera’s Live View is frozen in the app.

If the Live View is frozen perform a hard close of the app, then open it again.

Digital zoom is not working.

Digital zoom will not work while your camera’s menu is open. Press  to exit the menu.

Camera is not recording images and videos.

Recording images and/or videos will not work while the menu is open or when your camera is connected to a computer. Press  to exit the menu.

Camera’s screen is black.

Restart your camera. Press and hold  to turn your camera off, and then back on.

Camera is not charging or slow to charge.

• Ensure you use the supplied micro-USB cable and that it is properly connected.
 DANGER

◦ Improper battery replacement or use may result in fire, explosion, or other hazards.

◦ Only use accessories regulated by the manufacturer. Never use the charging cable or power adapter with another product.

◦ Make sure the plug is properly connected to the power socket.

◦ DO NOT charge your camera within 2 m of flammable materials.

◦ DO NOT connect multiple devices to one power adapter. The plug in the power socket could overheat and possibly cause a fire.

• Ensure the USB Mode is set to Off.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to USB Mode.

◦ Press  to open the setting.

◦ Press  to select Off.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

Camera’s battery keeps draining.

You can preserve your camera’s battery life in the following ways:

• Turn off any camera settings or functions that are not being used.

• Use your camera without the app. First, sign out your camera from the app, and then turn the Wi-Fi hotspot off. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to WiFi.

◦ Press  to open the setting.

◦ Press  to select Off.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• Set your camera to go into automatic sleep mode after 1 minute of inactivity has passed. First set your camera’s sleep mode (Suspend Mode) to be automatic, and then set the automatic sleep mode (Auto Suspend) to 1 minute.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to Suspend Mode.

◦ Press  to open the setting.

◦ Press  to select Automatic.

◦ Press  to confirm your setting.

◦ Press  to navigate to Auto Suspend.

◦ Press  to open the setting.

◦ Press  to select 1 Min.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• Set your camera’s screen brightness to low.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to Brightness.

◦ Press  to open the setting.

◦ Press  to select Low.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• Set your camera’s automatic shutdown to 60 minutes or less. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to Auto Shutdown.

◦ Press  to open the setting.

◦ Press  to select 60 Mins or less.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

Camera’s image has lots of graininess or scratches.

• Turn your camera off, attach the lens cap, and allow it to rest for a few hours before using again.

• To improve your camera’s image quality set the FFC Mode to Auto. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to FFC.

◦ Press  to open the setting.

◦ Press  to select Auto.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• To manually correct pixel defects in your camera’s image, set the DPC settings to Manual. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to DPC.

◦ Press  to open the setting.

◦ Press  to select one of the options:

· Auto: (Default) Your camera automatically calibrates defective pixels.

· Press  to start auto DPC.

· Close the lens cap until your camera signals that auto correction is complete.

· Manual: Correct the defective pixels manually.

· Press  to start DPC manually.

·  Press to switch between the X-axis and Y-axis.

· Press and hold  or  to start correction.

· Restore: DPC is restored to original state.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

ACH20-1B Thermal Monocular Camera: Frequently Asked Questions

The following FAQ answers many of the general questions about your thermal monocular camera.

.

How does my thermal monocular camera work?

To improve the visibility of objects in complete darkness, haze, or tough conditions, your thermal monocular camera uses infrared sensors to detect heat given off by a person, animal, or other objects. It creates images of that radiation called thermograms, which display the relative temperatures of different objects with different shades or colors. In a thermogram, warm objects stand out in a contrast or often cooler background. It is widely used in outdoor scenarios for hunting, rescue, animal observation, and more.

Is my thermal monocular camera battery-operated or hard wired?

Your thermal monocular camera is battery-operated, however, to charge the battery you will need to connect the micro-USB cable into your camera’s USB port and the other end into a power source.

Does my thermal camera only work at night?

No. Although thermal imaging cameras are most commonly used for nighttime vision, they can also be useful in daylight. The detection of heat radiation and the high contrast of thermal imaging cameras allow you to see the outlines of (warm-blooded) animals that camouflage well in their environments. It can also help distinguish animals or people in foggy or smoky conditions.

Can my thermal camera see-through walls, metal, or glass?

No, thermal imaging cameras do not see-through surface but detect surface temperatures.

Is thermal imaging and night vision the same thing?

No, thermal imaging can produce pictures without visible light while night vision cameras work by boosting ambient light. Their only common purpose is increasing visibility in low light conditions.

Can bright sunlight damage my camera’s lens?

Yes, aiming your camera’s lens with the lens cap open at powerful light sources (i.e. the sun) is not recommended, as this may adversely affect the accuracy or damage the thermal imager.

What is the clicking noise my camera makes?

This is simply the noise your camera makes while you are shifting it between different fields of view. The noise you are hearing is your camera focusing and calibrating the image to achieve the highest resolution possible.

Should I charge my camera’s battery before first use?

Since your camera’s battery is delivered partially charged, it is recommended that you fully charge it before first use.

How do I charge my camera’s battery?

Your camera has the following 4 battery charging statuses, as shown by the LED charging indicator located under the USB port.

How do I turn my camera on or off?

Press and hold .

Where can I find the mobile app?

The Thermal Connection Application can be downloaded on your smartphone with a valid Internet connection from iTunes or Google Play respectively.

See the article Connecting to the App for more details.

Why do I need to allow my Location Permission on the app?

The app requires permission to detect your Wi-Fi network in order to connect your camera to the app.

How do I connect my camera to the app?

See the article Connecting to the App for full details.

How do I disconnect my camera from the app?

For steps on disconnecting your camera from the app, see the article Using the App.

What is my camera’s Wi-Fi name and password?

Where can I find my camera’s serial number?

Your camera’s serial number can be found on:

• The serial tag located on the side of your camera.

• Your camera’s system information.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to (System Information).

◦ Press  to open your camera’s system information.

How do I record images & videos?

• To capture images: Press 

• To start or stop recording videos: Press and hold  for 3 seconds. A blinking red dot next to a recording timer on the left of the screen indicates that your camera is recording.

Note: Your camera cannot record images or videos while the menu is open or when connected to a computer.

For steps on recording images and videos from the app, see the article Using the App.

How do I zoom in my camera’s image?

To switch the zoom range: Press . Keep pressing to zoom in and out.

For steps on using digital zoom from the app, see the article Using the App.

How do I turn the laser pointer on?

 LASER RADIATION:

Exposure to laser light can cause significant damage to the eyes. Never look into the laser beam directly or through a piece of optical equipment.

To turn the laser on: Quickly press  two times.

For steps on using the laser pointer from the app, see the article Using the App.

How do I change my camera’s color palette?

To quickly change the color palette: Press .

For steps on switching the color palette from the app, see the article Using the App.

Which color palettes can I choose from?

Select your camera’s color palette for enhanced visual representations of thermal imaging. Switch between any of the following color palettes:

Note: Not all color palettes are suited for every situation. Select the option that best shows the thermal differences for your specific application.

How do I measure my target’s distance?

Measure the range distance between your camera and your target using the pre-set ranging modes for animals, people, etc.

• Press and hold  to open the menu.

• Press  or  to navigate to Ranging Mode.

• Press  to open the setting.

• Press  to select one of the options:

◦ Wolf: Measure your distance from a wolf, with a pre-set height of 1.2 m.

◦ Customize: Enter a custom height to measure your distance from your target.

◦ Wild Boar: Measure your distance from a boar, with a pre-set height of 0.9 m.

◦ Human: Measure your distance from a human, with a pre-set height of 1.8 m.

◦ Rabbit: Measure your distance from a rabbit, with a pre-set height of 0.3 m.

• Press  to confirm your setting.

• Press  to exit the menu.

How do I change my camera’s measurement unit?

For steps on changing the measurement unit from the app, see the article Using the App.

How do I track hot & cold points?

Track the hottest and lowest temperatures in your camera’s image at the same time. If enabled, your camera’s image will display a red target tracking the hottest point and a blue target tracking the lowest point.

• Press and hold  to open the menu.

• Press  or  to navigate to Hot Point.

• Press  to open the setting.

• Press  to select one of the options:

◦ Off: Hot and cold points is turned off.

◦ On: Your camera will track hot and cold points.

• Press  to confirm your setting.

• Press  to exit the menu.

For steps on enabling hot & cold points from the app, see the article Using the App.

How do I enable fire detection?

Detect fires in your camera’s image with a red box surrounding the source. If enabled, you can set the fire detection sensitivity from high to low.

• Press and hold  to open the menu.

• Press  or  to navigate to Fire Warning.

• Press  to open the setting.

• Press  to select one of the options:

◦ Off: Fire detection is turned off.

◦ High, Middle, or Low: Your camera will detect fires based on the sensitivity level.

• Press  to confirm your setting.

• Press  to exit the menu.

For steps on setting fire detection from the app, see the article Using the App.

How do I enable the fire detection alarm?

Set your camera to sound an alarm when fire is detected in the image.

Note: The fire detection alarm works only when your camera has fire detection enabled on either High, Middle, or Low.

• Press and hold  to open the menu.

• Press  or  to navigate to Alarm.

• Press  to open the setting.

• Press  to select one of the options:

◦ Off: Fire detection alarm is turned off.

◦ On: Your camera will sound when fire is detected.

• Press  to confirm your setting.

• Press  to exit the menu.

How do I export recordings?

Export recorded images and videos from your camera’s microSD card.

• Press and hold  to open the menu.

• Press  or  to navigate to USB Mode.

• Press  to open the setting.

• Press  to select Mass Storage.

• Press  to confirm your setting.

• Connect the micro-USB cable into your camera’s USB port and the other end into an available USB port on your computer.

• The microSD card’s storage will open on your computer desktop. Select files to export, then copy them onto your computer.

• After exporting, disconnect the micro-USB cable from your camera and computer.

• Press  to select USB Mode Off.

• Press  to confirm your setting.

• Press  to exit the menu.

Where does my camera store recorded images and videos?

Your camera stores recorded images and videos onto the microSD card.

What is my camera’s maximum storage capacity?

You can insert a microSD card with up to 256GB storage space.

How do I hide the icons on the top right of my camera’s image?

• Press and hold  to open the menu.

• Press  or  to navigate to Status Bar.

• Press  to open the setting.

• Press  to select Off.

• Press  to confirm your setting.

• Press  to exit the menu.

How do I change the language displayed in my camera’s menu?

• Press and hold  to open the menu.

• Press  or  to navigate to Language.

• Press  to open the setting.

• Press  to select your preferred language.

• Press  to confirm your setting.

• Press  to exit the menu.

Note: This will only change the language in your camera’s menu, not the app.

How do I restore my camera’s settings to default?

For steps on restoring your camera’s settings to default from the app, see the article Using the App.

How do I update my camera?

Update your camera through the microSD card.

Note: To download the latest firmware update for your camera, contact the Technical Support team.

• Press and hold  to open the menu.

• Press  or  to navigate to USB Mode.

• Press  to open the setting.

• Press  to select Mass Storage.

• Press  to confirm your setting.

• Connect the micro-USB cable into your camera’s USB port and the other end into an available USB port on your computer.

• The microSD card’s storage will open on your computer desktop. Copy the update program to the microSD card.

• Press and hold  and  at the same time for 3 seconds. A blue screen will indicate that an update is in progress.

After a few minutes the update will complete and you will see your camera’s live view image.

Where can I download my camera’s latest firmware update?

To download the latest firmware update for your camera, contact the Technical Support team.

Can I mount my camera to a tripod?

Yes, the tripod thread can be found on the bottom of your camera.

Can I access my camera’s Live View from an external monitor?

Yes, you can access your camera’s Live View from your computer by connecting your camera using the micro-USB cable.

What is the buzzer option in the app settings?

The buzzer is not compatible with your camera.

ACH20-1B Thermal Monocular Camera: Connecting to the App

Follow the steps below to connect your thermal monocular camera to the Thermal Connection app.

Note: The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: Wi-Fi 2.4 GHz (2.4 GHz to 2.4835 GHz) 20 dBm.

.

Step 1 – Download the App

Download your camera’s mobile app, Thermal Connection.

.

Step 2 – Enable Your Camera’s Wi-Fi Hotspot

Looking into your camera:

• Press and hold  to open the menu.

• Press  or  to navigate to WiFi.

• Press  to open the setting.

• Press  to select AP (Access Point).

• Press  to confirm your setting.

• Press  the exit the menu.

Step 3 – Connect to the App

You will now be able to view your camera from the app and make some minor setting adjustments.

.

<p>The post Thermal Monocular Camera user manual first appeared on NVR IPCAMERA SECURITY.</p>

How to add a Hikvision NVR to Hik-Connect

Before you start…​

Part 1: Enable Hik-Connect on the NVR…​

.

.

.

.

Part 2: Set up Hik-Connect on your mobile phone or tablet…​

.

.

.

Part 3: Add the NVR to your Hik-Connect account…​

.

.

.

Other tips…​

Guides for Hikvision NVRs with V5 firmware

How to set up motion detection and alerts on a Hikvision NVR

What is Motion Detection and why is it useful?​

Motion detection is one of the easiest events to set up and will notify you as soon as a person or vehicle enters a predefined detection zone in your scene. Traditionally, it would just rely on lots of pixels changing between frames in your camera’s video stream, which would indicate movement in the scene.

Of course, this would cause lots of alerts for things you are not interested in, such as animals, moving plants and rain. Hikvision’s Acusense cameras and NVRs now have something called Motion Detection 2.0, which cuts the false-positive detections right down as will only notify you when people and/or vehicles are in the scene by learning what they look like. In this simple step-by-step guide, we will show you how to get motion detection set up on the new NVR 5.0 web interface.

Step 1: Go to your NVR’s Motion Detection configuration page…​

Step 2: Configure your Motion Detection zone and rules…​

​

Quick tip…​

If you find that the camera preview is too small when drawing your detection zones, you can switch the view to full screen by clicking on the Full screen (four arrows) button in the toolbar, and then exit full screen by pressing Esc on your keyboard.​

Step 3: Set the arming schedule to specify when you want Motion Detection active…​

​

Quick tip…​

If the 30-minute segments are not precise enough for you, you can finely tune a period of arming or disarming by double-clicking on the segments and specifying your start and end times in minutes using the arrows.​

​

Step 4: Set what you need the NVR to do when a camera detects a target…​

How to connect an IP camera to a Hikvision NVR

Adding cameras to your Network Video Recorder (NVR) is a crucial step in any CCTV setup. Not only does it allow you to store and access all your camera recordings in one place, but it also simplifies camera configuration. In this simple step-by-step guide, we’ll show you how to add cameras to a Hikvision NVR using the new NVR 5 web interface.

.

Why add cameras to an NVR?​

.

Before you start…​

Before anything, to be able to add your IP cameras, you need to make sure that:
.

.

How to add your cameras using the V5 GUI…​

Step 1:​

Open a web browser and enter the IP address of your NVR in the address bar. If you are not sure what this is, use the SADP tool to find it.​

Step 2:​

Log in to the NVR using the “admin” username and password you have set on it.​

​

Step 3:​

Go to: Device Access > Device Configuration > PoE Settings​

​

If you are connecting your camera via the Plug-and-Play method, then make sure that Network Camera Plug-and-Play is enabled on the POE port you will be connecting the camera to on this page.​

​

For any camera with a cable run under 100m, leave the Network Cable Distance as Short Distance.​

​

If you are connecting your camera manually by IP address, disable the Network Camera Plug-and-Play option for the channel that you plan to add the camera to.​

Step 4:​

Go to: Device Access > Device > Video Device​

​

For any Plug-and-Play camera, just make sure that it is in its inactive default state and then connect it to the port you reserved in step 3. After 20 seconds or so, the camera Status should turn to Connecting and then Online (you may need to click on Refresh to see this).​

​

For Manually added cameras, if you can see the camera in the List of Online Devices section, then just tick the box for the camera and then click + Add to Device List, which will then automatically add it to one of the channels you disabled Plug-and-Play on in the last step.​

Alternatively…​

Click on +Add at the top of the page and fill out the fields as follows:​

​

IP Address: Enter the IP address of your camera, using the ‘Test’ button to verify there is a camera at that address. ​

Device Name: This can be anything you like, as it is the name the camera will show with on your NVR. ​

Protocol: Select the camera’s manufacturer from this list, or failing that, use the ONVIF protocol (your camera will need to have ONVIF enabled for this to work). ​

Management Port: Enter the Server port set on the camera, which you can find in the SADP tool or in Network>Basic Settings>Port in the camera’s web browser interface. If you haven’t changed this, it is usually 8000 by default. ​

User Name: “admin” or the username of any other users set up on that camera. ​

Password: The password set with that user on the camera – if this is the same as the ‘Default Activation Password‘ you have set on the NVR, then you can tick this box instead. ​

Transfer Protocol: ‘Auto’ is normally best. ​

​

When these are completed, click OK.​

​

Your camera should then appear in the list of devices with an assigned channel, and an Online status, meaning it has been successfully added.​

.

Extra tips…​

Source : https://www.use-ip.co.uk/forum/forums/guides-for-nvrs-with-v5-firmware.71/

.

<p>The post Guides for Hikvision NVRs with V5 firmware first appeared on NVR IPCAMERA SECURITY.</p>

How about you? It can happen for everyone to delete the videos from their system unexpectedly. We are here to share details and needed information about retrieving deleted videos from your Dahua system and explain some system features.

Can I retrieve deleted CCTV.

How do you review and save the videos in Dahua NVR?

We are here to tell you how to review and copy the recorded video in the Dahua NVR setup system. In the first step, you need to go to the menu option, so perform right-click anywhere on the screen to view the menu option. On the opened screen, you see the items below:

An important feature is available on the Dahua NVR system: the automatic systems are good features on these devices. Dahua NVR system cannot only record the videos but also back up the recorded videos.

In case of saving the videos, there will be a wireless option in the NVR system. Various devices can be connected to an NVR USB slot to save the videos. Connect one of these devices and right-click the mouse on the screen to open the menu. You can search for the demanded video date and time.

 ..

How to download recorded video files to USB on Dahua NVR?

It is good to know how to download some recorded footage you want to view on your PC or laptop. The first thing to do is go to the main menu. It may ask you for your password first, so you must enter it.

You will see the backup option. Click Backup. When you go to the backup option, it immediately shows you something connected to the USB. In this case, the process offers you a USB drive connected to your NVR system’s back.

There is a USB port on the back of the NVR system and a USB port on the front. You can use either one of these USB ports. According to the manual, it can connect to an external hard drive and the USB port.

Some users needed help connecting to the USB port with the larger hard drives. Based on this information, we recommend you use a thumb drive if you have one. You can insert your thumb drive into the USB port, and there will be a pop-up window.

In this step, you can access the back file too. You will have 2 methods available. You can either go via the menu or put your thumb drive in. Go to the backup menu. You can file the backup. Both methods lead you to the same backup screen.

It is also to see the used or free storage of your device. It is possible to format the drive to make the storage lighter. Be careful because it is straightforward to format the drive suddenly.

 .

How to backup video from the NVR system to USB?

We want to tell you how to backup video from your NVR system to a flash drive or USB drive on a system running. This is one of the most practical features of the Dahua CCTV system, similar to other security camera systems.

Various systems use features similar to the NVR system. The first stage is logging into your system typically. There will be some boxes, and you can see the cameras on those boxes.

Then, right-click to go to the main menu. In this step, you need to enter your password. Then is the time to go to the backup option. You will see your USB drive name if you have plugged it into the NVR system.

You have to connect your USB drive directly to NVR, and then you can check the storage condition. It is possible to browse and select where to save the recorded files on your drive.

You can also format the drive if it is brand new or a drive with files on it, and you don’t want to keep any existing files. You can go to the format and perform the format step to bring it back to the new state with nothing.

After formatting, you will not need to choose the exact place for your recorded video. You only need to go back to the browse and select the folder. It is vital to check out the type of video. What kind of video are you trying to search for?

Do you want to search for an alarm, a motion, a motion and alarm, a general video, and an intelligent one? What stream do you want to search for? Typically, the mainstream is useful and practical for everyone.

Getting back up from videos in NVR

In case you need to get the backup, you need to consider the start and end times. You have to select the time of the demanded day. In this case, you can click the search button and observe your record channel.

You can decide which camera you want to pull the video by checking this channel. It can be easy if you are looking only at one particular camera. But if you are looking at multiple cameras, you have to select 3 or 4 or even all.

Generally, getting the backup is a relatively easy task, but it is better to get help from intelligent experts in this field of activity. The good news is getting backup is possible in the NVR system, so you don’t need to be worried about the deleted or lost videos.

 .

How do you access the lost or deleted videos in Dahua NVR?

This part will explain the detailed steps to recover smashed videos from Dahua NVR systems. It would help if you double-click to open the NVR video data recovery software.

You can use the top and best software module for NVR. It is time to start the process. In the first step, you have to know the image file of Dahua. Then, select the image file and select the partition.

Next, you can use deep analysis to detect the NVR brand. You will see the NVR spot list. Sometimes, as the user, you are unsure about the NVR brand, so you can click the analysis mode directly to recognize the NVR system.

Finally, you can find out the main program has recognized 2 possible brands for the available image file. Usually, you have to select the top one. Finally, click the demanded one and click the OK.

It is also possible to rename the task and click OK. You can overwrite the existing task if you have worked with these features before. Can you find out the detectable dates?

You can detect the demanded video within these available dates and then analyze them. It is also a good idea to check the analysis speed too. You have to wait until the analysis process is completed. The remaining time is available for you to see and observe.

Besides the recorded videos, you can also face the raw videos with extension names. Remember that you must wait because the whole process of analyzing and video carving is automatic. So you don’t need to do anything.

Check the log and the file window. After completing the analysis, you can switch to the file window and find all possible cameras and a long list of videos.

 .

How do we recover the deleted videos from the Dahua NVR system?

According to the previous part and the access method of recorded videos in the NVR system, recovering these lost videos will be relatively easy. You only need the analysis mode of the Dahua NVR system, and for this analyzing process, you have to use deep analysis.

If this step and process don’t work as you want, you can select the device and try the custom analysis to set up another task. You also can try to put a name with custom. To tell the difference between each task, like fast analysis, deep task, and custom task, you must know all the available options in the NVR system.

Usually, you can use the deep or custom task for the Dahua NVR system. Finally, you can switch back to the directory or log window. You will the witness of the almost complete progress.

The digital experts mostly use the online checksum, and they have the read-only option in the setting. You can tick the demanded one to ensure it is the original device with the read-only option.

Not any of the proper operations can affect the original devices. Another available option is adding checksum options. These features show why many people need digital engineers.

The standard data recovery engineers can help you if you find your lost video. Some users believe they don’t need the expert because ticking the other checksum options is much easier.

The analysis speed will become slower than the average speed. Finally, you can check channel one of your camera and see the recovered lost videos. You can also watch the preview video, which is useful and practical.

 .

How do we retrieve the deleted video from NVR?

Time is the main thing when trying to retrieve the deleted recorded video. Whenever you realize you have lost your videos, preventing the NVR from overwriting the deleted video is essential.

Note that recording and storing the new videos can decrease the chance of a successful retrieval. In addition, you have to check the backup storage. This feature can help you recover the lost or deleted video.

Some NVR systems have an automatic backup feature, which helps you retrieve lost and deleted videos. If you cannot recover the lost data, contact your NVR system’s technical support.

These experts can provide the best guidelines and information to retrieve your lost footage. You only need to share the details of your NVR system, its software version, and the type of video you lost.

There is another available option to retrieve the deleted video. You can use the recovery software of the NVR system. This software can support you retrieve the deleted video as soon as possible.

You must follow the instructions mentioned to utilize the software quickly and promptly. This software is compatible with the NVR system. It can also be practical in the installation process of the NVR system.

Don’t forget to get help from a professional assistant in this field of activity. These persons can help you in a unique process using the most advanced tools and devices.

Final thought

Deleting helpful videos from NVR can be harmful, mainly when the video contains important content. Based on the mentioned information, it is possible to recover and retrieve the deleted or lost videos from the NVR system.

This article has mentioned all the steps and processes of deleted video recovery. We also share some information about the backup process in the NVR system. You have to check the highlighted process and consider the chance of a recovery process.

Finally, retrieving is only sometimes an easy method for everyone, but you can experience the recovery process with the help of different available devices and options. Don’t worry about your deleted video; you can retrieve it easily via the NVR system. We’re Dahua UK Authorised partner providing Dahua products with the best price only for trade users.

.

<p>The post Can I retrieve deleted CCTV footage from my Dahua NVR first appeared on NVR IPCAMERA SECURITY.</p>

Intro

You’re Not Alone

Installation can be hard. We’re happy to talk it over with you or take over a DIY project that you’ve realized needs professional installation. Our support hours are from 9AM-7PM Monday – Friday (EST) and we are available via chat, email, phones, and remote PC screen-sharing, if you need any help. You can reach us at 866-414-2553.

Disclaimer: The laws governing cable and wire installation can vary from state to state and sometimes even counties and cities pass specific, unique laws regarding cabling; these state, county and city laws are too complex for us to explain. This page is not a how-to installation guide, as we cannot keep up with local laws.

Although we now offer installation, locally, we started as a DIY-only company, and we primarily serve those adventurous types who want to run the cable for themselves. Even so, we get asked about do-it-yourself installation all the time…. We wanted to post a few of our standard answers here.

Part 1

Don’t Start a Fire or Shock Yourself

Electricity Can Kill You; Avoid Electrical Lines!

Never strap, staple or otherwise run networking cable to conduit or raceways carrying electrical current. Never run any cable within 2 inches of Class I electrical lines, lighting, fire alarm, or power lines or devices.

Give a Wide Berth to High Voltage Devices or Lines

Never run any cable within 6 feet of a conductor or fuse box. A minimum 5-inch distance is required from any fluorescent lighting fixture or power line over 2 kVA and up to 24 inches from any power line over 5 kVA. If unsure about the a device or line, consult an electrician. Route cable away as far as you can from large motors, generators, induction heaters, arc welders, x-ray equipment, and radio frequency, microwave or radar sources. NEC/NFPA 70, Article 800-52

Protect it from Future Physical Damage

You might want to put a nail or screw in later and don’t want to puncture your cables, so when a cable, raceway, or soft conduit (anything you can puncture) is installed parallel to framing members (joists, rafters, or studs), furring strips, or crown molding, keep the cable at least 32 mm (1.26 inches) from the edge. NEC 300.4(D)

Don’t Leave it Dangling – Secure Your Cables

You can connect cable directly to a surface with straps, staples, cable ties, hangers, or similar fittings, but you have to secure it somehow. NEC 800.24; 300.11

Use Plenum rated cable in Areas with Airflow

If you are going to run cables through an area which is used by your heating, air circulation, or air conditioner systems (such as above a drop ceiling in an office), you must use Plenum rated cables, which have a special insulation that has low smoke and low flame characteristics. When securing cable in Plenum required areas, make sure your straps, cable ties, and similar fittings also are plenum rated. NEC 830; NFPA 90A

National Rules – Consult your local laws

These guides are meant to familiarize our clients with the national requirements as expressed in the National Fire and Alarm Signaling Code and the National Electrical Code. Your state or local laws may differ. If you live outside the USA, consult your governmental laws. Don’t consider this your only resource.

Turn the Breaker Power OFF

Any time that you will be drilling or cutting into your wall, you want to turn the power off. You don’t want to drill into a hidden electrical line. You probably already know this, but our lawyers insisted.

Wear Safety Goggles

Any time that you are drilling, you want to wear safety goggles and hearing protection, like ear plugs.

Security Camera Installation Guides v2

Part 2

Drilling through Different Materials

Sheetrock (most interior walls)

A list of tools necessary, step-by-step instructions for installing SCW cameras, and how to close up the hole when drilling into a surface made of sheetrock.

Wood

A list of tools necessary, step-by-step instructions for installing SCW cameras, and how to close up the hole when drilling into a surface made of wood.

Stucco

A list of tools necessary, step-by-step instructions for installing SCW cameras, and how to close up the hole when drilling into a surface made of stucco.

Brick and Masonry

A list of tools necessary, step-by-step instructions for installing SCW cameras, and how to close up the hole when drilling into a surface made of brick.

Concrete

A list of tools necessary, step-by-step instructions for installing SCW cameras, and how to close up the hole when drilling into a surface made of concrete.

Metal Siding

A list of tools necessary, step-by-step instructions for installing SCW cameras, and how to close up the hole when drilling into a surface made of metal siding

Part 3

Running the Cable

Basic Cabling

Terminating Cable (Putting the ends on)

Instructions for putting the RJ45 ends on to ethernet (for example, Cat5 / Cat6 / Cat5e) cable.

Using Our Waterproof Connectors

When installing a camera outdoors, it is imperative that you put our waterproof RJ45 Connector on the ethernet (for example, Cat5 / Cat6 / Cat5e) cable.

No Protection – Just Running the Wire

You can connect cable directly to a surface with straps, staples, cable ties, hangers, or similar fittings, but the cable could get damaged and someone might be able to cut it.

24 Volt Wiring: PTZ

The Spotlight PTZ cameras uses 24 volt power rather than POE because it requires more power than is capable of Power-Over-Ethernet for its natural white light spotlight. The Laser can also be powered via 24 volt power and can be powered the same way, although it is not required to do so. This guide shows you how to wire these PTZs.

24 Volt Wiring: Sharpshooter

The Sharpshooter IP Bullet cameras uses 24 volt power rather than POE because it requires more power than is capable of Power-Over-Ethernet for its long range infrared. This guide shows you how to wire the Sharpshooter.

Protecting your Cabling

Liquidtight Plastic Tubing

Liquidtight plastic tubing is easier to work with than flexible metal tubing, but is less secure. It is also great for areas with lots of expected moisture as it won’t rust.

Flexible Metal Conduit (FMC)

Flexible metal conduit is difficult to cut (watch out for sharp edges), but easier than solid conduit to install.

Electric Metal Tubing (EMT)

Solid metal conduit is the most secure form of installation. It requires a specialty conduit bending tool.

Conduit Fill

This chart will let you know how many cable runs you can fit in one conduit pipe, depending on the size of the conduit.

Raceway (Outdoors) – Coming Soon

Raceways are most popular indoors to make the space look clean and professional. There are also outdoor rated raceways; this guide covers using raceways outdoors.

Clean and Professional Interiors

Raceway (Indoors)

Raceways are most popular indoors to make the space look clean and professional. There are also outdoor rated raceways. This guide covers using raceways indoors.

Ethernet Wall Plates

Not recommended. It can be difficult to find a wall plate that passes POE power and provides grounding. These devices also provide a secondary point of failure, and take up far more room than a cable pass through plate for larger systems.

Dealing with Long Distance

Using POE switches to reduce cabling

You can run one cable to a POE switch and then run several cameras to that switch, however, POE switches are not plug-n-play. POE switches do require you to know a decent amount about computer networking.

Cables run over 300 feet

Cat5e and Cat6 cable data has a limit of 300 feet, but if you need to go further than that you can use a POE extender, POE injector, or POE switch to hear and repeat the signal. This article discusses when you would use each of these tools.

Long Distance Wireless

Military-Grade Long-Range Wifi Solution are used when attempting to send wireless IP Camera video data more than 100 feet (and up to 3 Miles). These products will require a professional wireless network technician on location.

Part 4

Mounting Cameras and Recorders

Basic Camera Installation

Bullet Cameras on Walls

In this guide, we will be installing a bullet camera on a wall.

Bullet Cameras on Ceilings

In this guide, we will be installing a bullet camera on a ceiling.

Bullet Cameras on Soffits

In this guide, we will be installing a bullet camera on a soffit.

Dome Cameras on Ceilings

In this guide, we will be installing a dome camera in a ceiling tile.

Dome Cameras on Walls

In this guide, we will be installing a dome camera on a wall.

Positioning the Lens in our Dome Cameras

In this video guide, we demonstrate how to adjust the lens positioning on our Marshall, Guardian, Warden, and Mosquito Dome Cameras.

Audio and Alarm Inputs FAQ and Sample Wiring Guide

Here’s a guide on Line-Level Audio Inputs and Analog Wired Alarm Integration.

Attaching Our Camera Mounting Accessories

Electrical Mounting Boxes

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

PTZ Wall Mount Bracket

This guide will show you how to mount your PTZ camera to the wall mount bracket.

Pole Mounts

In this guide, we will be installing a Hornet Pro bullet camera on a pole.

Pendant Mounts

In this guide, we will be installing a Radius panoramic dome camera on a pendant mount. You can install all our PTZ and a few of our dome cameras via Pendant mounts.

Screw Size Chart

Lose a screw? No problem. Here’s all our 2018 product line screw sizes in one convenient place.

NVR Mounting Options and Hard Drive Installation

Shelf / Desk Mounting NVRs

This is what most people do: just put it on a shelf or desk. This makes it easy to connect to a TV/monitor and use the mouse (included) to control the NVR.

Rack Mounting NVRs

Companies often want to put the NVR in their server rack room. People who do this often to control the NVR only through our apps or web browser. Only our larger NVRs (16 channels and up) are wide enough to be rack mounted (and they come with ears). Our smaller NVRs can use our Rack Mount Shelf.

Wall Mounting NVRs

Many people choose to mount their NVR on a wall near a TV. To do this, you will want to purchase a vertical rack, like this one that matches the height of your NVR. The 16, 32, and 64 channels units have a height of 2U and the 128 channel is 3U. NVRs are heavy and you will want to make sure your wall can support the weight.

Mounting NVRs behind a Wall / in an Attic

People who are afraid of the theft of an NVR often place it behind a false wall or in an attic. People who do this control the NVR only through our apps or web browser. Be aware: Not all attics are insulated well enough to be within the temperature requirements of the NVR. Temperature range is listed on each NVR’s technical specs tab.

“NVR” Lock Boxes

There’s a few companies advertising “NVR Lock Boxes,” but any Server Rack or Computer Rack will do. Most Server Racks or Mounts have locks on them already. This picture is of a Tripp Lite Server Rack with Lock It houses a 32 channel NVR, two of our POE Switches, and a router, but there are tons of companies selling small server racks online.

NVR hard drive installation

If you purchase both a hard drive(s) and recorder from us, we will happily install the hard drive for you. but here’s a handy guide if you want to do it yourself.

Part 5: Specialized Work

When to NOT DIY – Get an Expert

Long Distance Wireless

Military-Grade Long-Range Wifi Solution are used when attempting to send wireless IP Camera video data more than 100 feet (and up to 3 Miles). These products will require a professional wireless network technician on location. We can’t offer support on this product remotely, as once we can see it remotely, that means that it is already working.

Aerial Cable

Aerial cable clearance varies based on location (cable over a road needs more clearance than over a sidewalk, for example), needs to be enclosed within 8 feet of finished grade, and requires a on-site structural analysis to make sure the cable won’t break. Hire an expert.

Burial of Cable

Number one, call 811 before you ever dig: know where your power company has buried its power cables! The required cable burying depth also can vary based on your local zoning laws and your certificate of occupancy; you should get an expert.

Elevators

Don’t even try to install any cable in one without a licensed elevator technician’s help as the cable needs to be inside the cable traveler. An error in securing the cable can result in damage to the elevator’s operation – and potentially the people inside it. Don’t mess with it; get a licensed elevator technician to run the cable.

<p>The post Security Camera Installation Guides v2 first appeared on NVR IPCAMERA SECURITY.</p>

We can talk directly on phone app for asking courier to put package to a certain place you point, and hear sound from app or TV monitor connected to NVR

We could be alerted any time a person enter your property by receiving push notification from free phone APP, and the alarm light will be triggered to drive away the suspicious objects ( Note: APP has No Monthly Fees)

High Resolution 2592 X 1944 pixel to provide your vivid and clear image no matter in day or night, and IP 67 Waterproof to withstand Changeable Weather like Snowy/Rainy Day

We can customize the surveillance area or set a line for human/vehicle, and the alarm alerts will be triggered when detecting human/vehicle crossing the line or intruding the alarm area （These function may only work with Hiseeu NVR）

Version 2020-2022 PoE System FAQs in total

.

Further support, plz email us at email love@hiseeu.com

Or contact us at +1 917 688 2228

.

Important Notes:

These FAQs are only adaptable to following Models NVR Model : H5-NVR-P-8,

Camera Model: HB215-PA, HB212-PA, HB915B-PA

Mobile Phone APP: XMEye Pro         PC Client :VMS

Hisseu PoE Camera System User Guide v1

Contents:

A:  Forget NVR Password?

B:  Add Device on PC Client Software (VMS）?

C:  How to Sign up account on Mobile APP (XMEye Pro) ?

D:  Add Device on Mobile Phone APP (XMEye Pro)?

E:  How to enable Alarm Notifications on APP XMEye Pro?

F:  Configure Offline Camera or Add a New Camera?

G:  No Video Display on TV Monitor Or Blank Screen?

H:  Why DVR/NVR can’t record or playback video?

.

Detail Solutions:

A:  Forget NVR Password?

1. Please click the mouse from the home screen, and “Logo Out–>Log Out”

2. Right click the mouse again, click “ Main Menu”–> “Forget password –> Forget answer”, you will see the “QR Code”

3. Please open your mobile APP “XMeye Pro”

（1）Click the Scan icon on the top left corner

（2）Scan the “CAPTCHA” on the TV monitor, then you will get a code from the mobile phone APP or from your email, and enter the code into “CAPTCHA”, so you will be able to reset the password on the Monitor connected to DVR

.

B: Add Device on PC Client Software (VMS）?

VMS download link:

For Windows （2023 newest version）

https://download.xm030.cn/d/MDAwMDE0OTM=

For Mac ( 2022 version)

https://download.xm030.cn/d/MDAwMDA2NDA=

1. Download PC Client “VMS” and installed

2. Login with the default User Name and Password. Click “SIGN IN”.

Default User name is: admin

Default Password is: admin

3. Navigate to “Device Manager”–>”Manual Add”

4. Login Type: Cloud ID Device Name:

Name Your Device as you like

Cloud ID : Device Serial Number. We need to go to the TV Monitor connected to the NVR , and find out the information on TV Monitor UI, then right click the mouse to navigate to the path of “Main Menu–>Advanced–>Version” to find out the information “serial number”

User Name and password: Input the user name and password that you created for the NVR , and we also need to find this from the Monitor UI.

.

5. Navigate to “Live View”, Click on the device name(serial number), then select “Open All By Sub Stream”

.

C:  How to Sign up account on Mobile APP (XMEye Pro) ?

Please follow these instructions to sign up for an account via your mobile number.

1. Click on Sign Up

2. Sign Up by email or Select Mobile Number

3. Select the correct country code +1, input your mobile number and click on “Get code”

4. A code will be sent to the mobile phone number, input the verification code and continue.

.

D:  Add Device on Mobile Phone APP (XMEye Pro)?

Steps:

–>1. Please connect the NVR/DVR box to your Router via Network Cable; (Some customers think it can support WIFI connection, while wired systems only support wired router connection, and have to be wired to router via ethernet cable)

–>2. Go to Monitor UI Interface, and Navigate to “Main Menu > Network > Net Service”, if the “Cloud Status” shows connected, means NVR/DVR is online (Please skip step3),

–>3. If the cloud status shows “Probing DNS”, Please Navigate to “Main Menu > Network > Check the icon of “Enable DHCP”–>Apply;

–>Reboot the DVR by unplugging the power adapter and re-plug it, then double-check the cloud status ( only cloud status shows )

–>4. Go to your TV Monitor, navigate to “Main Menu–>Advanced–>Version”–> You will see the serial number.

The QR code contains Serial number info. We need this information after we add the device to mobile phone APP

–>5. Open the mobile APP “XMeye Pro” and register an account by your email first

–>6. Click”+” to add device–>Choose “NVR”

Device Serial Number: Click the “Scan” icon to Scan QR Code On the NVR UI Interface (Main Menu–Advanced–Version), (QR code contains username and password)

No need to input the username and password manually.

And click “OK”, and go back to the Device page on App,and you will see the device shows status:online ,

E:  How to enable Alarm Notifications on APP XMEye Pro?

1.Make the Alarm setting is already set on Monitor UI Interface

2. Please right-click mouse and navigate to “Main Menu–> Alarm–>Motion Detect/Human Detect/Face Detect–> Enable “Mobile Reported”–>click “OK”

(Default Setting is for Channel 1, Please select “All” channels.)

2.Open “XMeye Pro” mobile App, and navigate to “Event–>Device (the one you named)–>Enable “Allow Notifications”

.

F:  Configure Offline Camera or Add a New Camera?

—>1. After connect the camera to NVR via network cable, if the camera power on properly, the camera’s indicator light should be blinking.(see picture attached)

.

When you cover the camera’s photocell or put the camera in dark place, the infrared LED should turn on red color.

—>2. If camera powered on properly please follow below instructions.

1.Right-click mouse navigate to “Quick Setup(or Channel Set) –>Cancel

2. In the second box, if any camera status is offline or not connected, please select it and click ”Delete” first

3. Click “Search”, can you see new IP address showed on the topper box?

4. Select the IP address in topper box and click Network–>Auto Assigned–>OK

5. If auto assigned successfully, please click “Add” to add the camera.

.

.

G:  No Video Display on TV Monitor Or Blank Screen?

My UI Interface shows “No signal” or “Black Screen” ？

We need to divert this issue into two situations:

1.NVR Indicator light is on:

(1) Cause: The camera system’s video output resolution is 1080P. If your TV monitor resolution is below 1080P, this issue will occur.

Steps:

Please right-click and hold your mouse for over 10 seconds to see if the system can reboot or not. Or, please try to connect the system to another TV monitor with a higher resolution (above 1080P)

.

(2) Cause: The hard disk drive inside of the DVR box is broken, and use the screwdriver to open the DVR box to unplug the wires of the hard disk drive, and reboot the DVR to have a try. If the DVR box can be rebooted after unplugging the wires of the hard disk drive(HDD), which means the HDD is having an issue, and needs a replacement, plz contact email love@hiseeu.com for replacement HDD

After steps, if the thing still cann’t be resolved, which means the NVR box is broken, plz contact email love@hiseeu.com for replacement NVR box if their warranty is still 1 year

.

2.NVR Indicator light is off:

(1) Cause: The power adapter 52V 2.5 A connected to the NVR box is broken

Step: Use another power supply 52V 2.5 A to power on the NVR unit to have a try ( If you do not have a spare one, can contact us to buy a new one or we send you a new one if your warranty is still under 1 year )

.

(2) Cause: The hard disk drive inside of the NVR box is broken Step: Use the screwdriver to open the NVR box to unplug the wires of the hard disk drive, and reboot the DVR to have a try. If the NVR box can be rebooted after unplugging the wires of the hard disk drive(HDD), which means the HDD is broken, and needs a HDD replacement, plz contact email love@hiseeu.com for replacement HDD

.

H:Why DVR/NVR can’t record or playback video?

.

If HDD(Hard disk drive) is having issue or something wrong with record setting, the DVR can’t record/playback the video

.

1.Check if the hard drive status is normal or error

Navigate to NVR/DVR Monitor UI Interface: Navigate to “Main Menu–>Advanced–>HDD info”

If status shows “Error” or No hard drive info , which means the hard drive is broken. (need to replace hard dirve)

2.Check the record plan is set up for 24/7 continuous recording

Navigate to “Main Menu–>Record Conf”

Channel : select “All”

Period: “00:00-24:00”

Select “Regular”

3. Please make sure the HDD was set up to “Overwrite”. (if it was set to “stop”, the system would stop recording when the storage is full)

Navigate to “Main Menu–>General–>Storage Full”

Add Device on Guard Station PC Client Software

Add device to “Guard Station” Download link: https://www.dropbox.com/sh/jeftu4sqwy4y1u8/AAD4PkyEJxg6j4H1n20PxBkZa?dl=0  

.

Please sign up for the mobile APP(Guard Viewer) account and add the device first.

Download and run “Guard Station” on the PC

1) Please Navigate to “Device Management”> “Cloud Device”> Click on “Login”

2) Login with your APP account and password.

3) After Login, the device you added to the APP will list here

Please click on “Control Panel”> “Live View”> Double-Click Camera to load the live view video

Add Cameras to NVR or PoE Switch (Router)

Add Cameras to NVR/ PoE Switch or Router

1. Add camera via NVR PoE Port

• If the camera is connected to NVR PoE port directly, the IP address

range should be modified to “172.16.0.X” (X is between 2 to 255)

Please right-click mouse and navigate to Camera

For brand new camera (password is 123456 by default), NVR will detect

and add camera automatically.

If the camera’s user name or password has been changed, you are required to input the info manually.

Move the mouse to the status icon , you will see the error message. “Offline [incorrect Username to Password]”

Please click on the edit icon to input password manually and click on “OK” to continue.

2.Add Camera to NVR via PoE Switch or Router

NVR will detect the camera under the same WLAN and list IPC here

• Click on plug icon to add the camera. If the camera has default user name: admin, password: 123456.

NVR will add it automatically.

• If the camera’s password has been changed, please click on the setting icon to modify the info.

• In this situation, the camera IP address range should be the same as NVR’s IP range

(You can check NVR IP by navigating to Network>Basic> TCP/IP). If not, please contact the technician to modify the camera’s IP first.

Camera Not working

Camera not working?

1.(Port issue) Insert the camera to another port of the NVR to have a try, and wait at least 5 minutes

2. (Camera issue) Make sure if the camera infrared light will turn on red or not in the night time

3. Also plz right click your mouse to “Menu-Camera”, and take a photo of this whole page and send it to us

（Check how many cameras are discovered）

Also go back to the home screen and Check connection status, to see if it shows” Network disconnected” or “incorrect user name and password”

Device Offline on APP or NVR?

Device Offline on APP or NVR?

If the device shows offline on mobile phone app  “Guard Viewer” , we need to make sure the NVR is connected to network perfectly or not

Go next to your Monitor that connected to NVR, and check out the network status

first navigate to this path first : “Menu–Network–Basic–P2P” , also check the device status is online or not,

if it shows: network disconnected, plz enable the DHCP in this path ” Menu–Network–Basic-TCP/IP ” and click “Apply” . After that, go back to “P2P” and check if the device status is online or not

Also , please make sure the PPPOE needs to be disabled, plz navigate to “Network–Advanced–PPPoE”

Enable Alarm light on Each Camera?

Enable Alarm light on Each Camera?

.

(Alarm light would only work during the night time when the alarm was triggered)

.

1. Set up the Alarm light First Right-click your mouse to “Menu– VCA — Intrusion Detection/Crossing Line Detection– Triggered Actions” , and draw the rules for the alarm type

After you set up an alarm type (Like”Intrusion Detection”, or “Crossing Line Detection”), Click on “Alarm Linkage”, you will have the option to Enable “Alarm Light” (Spotlight is only Available During the Night)

2. Enable Alarm Light on “Triggered Action– Alarm Light” for each channel, and Click “OK”

Forget NVR Password？

If you forget your current password, please follow the instructions to reset it.

1. In the system login interface, please click on “Enter Password” > “Forgot Password”

2.If you filled in your email address as a reserved email when you set up the system, you can reset the device password via the APP(Guard Viewer) by navigate to “Me–General–Forget Device Password”

3.Scan the above QR code by app and the security code will be sent to your email address.

4. Enter the security code from email to reset the password

Additionally, If you the email doesn’t belong to you, plz contact us at love@hiseeu.com for more support

Add Device to APP(Guard Viewer)

.

Auto add is not suggested. Please tap on “Later” if you see this message box.

.

In this situation, it will Auto Search to discover the NVR device connected to the local network. But once your mobile phone disconnects with LAN WiFi, you will not be able to view it anymore.

Please Add devices in this way

1.  Please Tap on “ Menu” icon> Tap on “Devices”> “Add”,

2. Tap on “Scan”> “OK” to scan the NVR QR code

3.Navigate to “Menu– Network> Basic> P2P”

• If the Device Status is “Network connected…” , means device is online   and ready for remote view

• If the Device Status is “Offline” , please check the network connection first, if the problem remains, please feel free to contact us at Love@Hiseeu.com   

After you add the device successful, the “Device status” will be “Online”, and your APP account username will display here.   • You can check your APP user name by navigate to “Me”

• If the username doesn’t belong to you, please click on “Delete” and add it again.

4.Add NVR by scanning device QR code and click on “save”

5.   Please Tap on “Menu ” icon, Tap on “Live View” “Add”

6. Select the device and tap on “Start Live View”

Human Tracking/Detect for Model PK-4YHD985-CT ?

1.To enable human tracking , Set preset point “21”. Here is the video link for your reference: https://www.amazon.com/live/video/07adae4ec34a47618bd754cc6c1f8966?ref_=dp_vse_ibvc1

2.To enable human detection, plz go to this path “Menu–Alarm-Motion” , and choose the camera you want, to enable it

(This doesn’t support customize area)

No Video on TV Monitor or blank Screen?

.

The camera system video output resolution is 1080P, if your TV monitor resolution below that will occur this issue.

.

If possible, could you please try to connect the system to another TV monitor with a higher resolution(above 1080P).

Or, please hold your mouse wheel over 10seconds to see if the system can reboot or not.

If not, plz contact us for further support

How to share Device to others via APP Guard Viewer?

.

One device linked to One User ONLY. The NVR system ONLY can be controlled by one authorized account, who can share the device with others in order to prevent attacking or hacking.

For admin user, please follow the instructions to share the device with others:

.

1.Type on “Menu Icon ” and navigate to “Devices”

.

2.Tape on “… ” > “Share”, You can select a single channel to share or select the entire NVR system to share

(1) Share device by typing in the user name you wanted to share with and selecting function as needed.

• The other user needs to register a Guard Viewer APP account and provide the user name for sharing.

• After that, when this user login the APP will find the device by navigate to “Devices”

(2) Share device by generate a QR code

• Create a sharing password and set the valid period

• Click “Generate”, your APP will generate a QR code

• Other users can use the APP to add the device by scanning the QR code you sent

Download the mobile APP and Sign up for an Account

.

1. Download and install the app.

Please scan the QR code to download the free APP “Guard Viewer”

You also can visit the Apple Store or the Google Play Store to download the Guard Viewer app for iOS or Android devices. Alter installation, tap the icon to launch the app.

2.Register an account and login

For first time use, please create a new account and add the following steps:

Please tap Sign up and follow the on-screen prompt to register an account by email.

<p>The post Hisseu PoE Camera System User Guide v1 first appeared on NVR IPCAMERA SECURITY.</p>

Our products and solutions have been deployed and used daily in more than 100 countries and regions, meeting customer needs in various vertical markets that range from residential to commercial, from healthcare to public safety.

Reset Device Web Password on Akuvox Cloud Platform

Users may forget passwords for logging into device web interface. Follow the steps to reset the web password when the device is connected to Akuvox Cloud.

Step 1

Log into the Akuvox Cloud platform with an installer account.

Step 2

To go to the device Info page, follow the steps.

On the Single-tenant Manager view

1. Click User on the left column.

2. Click the Device icon of the desired user.

3. Click the Info icon of the desired device.

On the Project Manager view

1. Select Community or Office on the left upper corner.

2. Click the Info icon of the desired community or office.

3. Click Intercom Devices and then the Info icon of the desired device.

Step 3

1. On the device Info page, click the Settings button.

2. On the Settings page,

Note

Factory Reset Akuvox Devices v2

Reset Door Phones through Physical Buttons

Note

Power up the devices before resetting them through the physical buttons.

S539, S532, X916 and X912

Hold the reset button with a pin and the device will be reset.

X915, E12 and DB01

Insert a PIN into the hole and hold it to reset the device.

E16, E18, E20 and E21

Remove the back cover of the door phone and hold the reset button to reset the device.

R27, R28, R29 and R20 Series

R27, R28, R29, and R20 series do not support resetting by pressing physical buttons.

Watch the video for other reset methods.

Reset Intercom 2-wire Kit Accounts for Single Tenants

Through resetting, the tenant information will be deleted while the device information will be retained after a tenant moves out. This saves time from repeatedly entering the device information.

Installers

1.Log into the SmartPlus Cloud platform with an installer account.

2.Click Role in the upper right corner to switch between single-tenant and community projects.

3.Click to reset the target user account.

After resetting, the following data will be reset:

The following data will be kept:

The following data will be removed:

Distributors

Distributors can reset the Kit users when the Kit is added directly to the single-tenant projects under the distributor account.

3.Click  to reset the target user account.

After resetting, the following data will be reset:

The following data will be kept:

The following data will be removed:

End Users

End users can delete the family master account on the indoor monitor.

After resetting, a new QR code will be issued to the indoor monitor from the SmartPlus Cloud.

On the SmartPlus Account screen, tenants can scan the QR code to register SmartPlus accounts themselves.

.

How to Configure and Modify the Password

The initial password “admin” is rather weak, easy to crack, thus we provide for you the password change service.

Before Start

The difference between the user mode and admin mode on the web page

How to configure

Website password modification

admin mode
Go to Security >Basic >Web Password Modify, choose user name as “admin”, click Change Password, then enter the old password “admin”, input the new password.

user mode
Go to Security >Basic >Web Password Modify, click Change Password, then enter the old password “user”, input the new password.

Device password modification

System code
System code is used to enter “More Interface”, to adjust the password: More>Settings>More, input the default system code “123456”, tap System Code, input the original system code and new system code.

Setting code
Setting code is used to enter “Settings”, and it is left blank by default. To adjust the password: More>Settings>More, input the default system code “123456”, tap Settings Code, leave the original settings code blank, input the new one.

Steps to Enter Device Web Interface

.

Factory Reset Akuvox Devices

Reset Device Web Password on Akuvox Cloud Platform

Users may forget passwords for logging into device web interface. Follow the steps to reset the web password when the device is connected to Akuvox Cloud.

Step 1

Log into the Akuvox Cloud platform with an installer account.

Step 2

To go to the device Info page, follow the steps.

On the Single-tenant Manager view

1. Click User on the left column.

2. Click the Device icon of the desired user.

3. Click the Info icon of the desired device.

On the Project Manager view

1. Select Community or Office on the left upper corner.

2. Click the Info icon of the desired community or office.

3. Click Intercom Devices and then the Info icon of the desired device.

Step 3

1. On the device Info page, click the Settings button.

2. On the Settings page,

Note

.

Check IP Address of Akuvox Door Phones

IP address(es) can be obtained on Akuvox door phones. With the IP address, you can log into the device web interface for configuration, troubleshooting, and more.

Devices with Numerical Keys or Touch Screens

Check the IP address on the system information screen.

Devices without Numerical Keys or Touch Screens

Check IP address through automatic IP announcement.

Note

You can also obtain the device’s IP address using the Akuvox IP scanner.

Download IP scanner:
https://knowledge.akuvox.com/docs/akuvox-ip-scanner?highlight=IP

Check IP Address of Akuvox Indoor Monitors

IP address(es) can be obtained on Akuvox indoor monitors. With the IP address, you can log into the device web interface for configuration, troubleshooting, and more.

The routes may vary by model.

In this part, C313 is taken as an example.

Exception

To check the IP address of S560, press the # key for about 5 seconds and the device will automatically broadcast its IP address.

Check IP Address of Access Control Terminals

Obtain IP Address via IP Scanner

IP scanner allows you to search the device IP address(es) and to perform targeted device reboot, reset, network setting, etc.

Note

Installation

1. Decompress the rar. file downloaded.
2. Double-click on the setup.exe file.

3. Go through the installation process.

a. Click Next to start the installation.

b. Check to accept the terms of the license agreement, and click Next.

c. Enter User Name and Company Name, and click Next.

d. Click Finish to install the IP scanner successfully. The software icon will appear on the desktop.

Obtain IP Address

Note

To obtain the device IP address, your personal computer should be in the same LAN as the device.

Additional Features

Apart from checking IP address(es), you can export device information and perform targeted device network settings and web interface access, reboot, and reset.

Note

Before applying the following changes, enter the User Name and Password. The default is admin.

Log into Device Web Interface

Enter the device IP address in a browser, and you can log into the device web interface for configuration, troubleshooting, and more.

.

<p>The post Factory Reset Akuvox Devices v2 first appeared on NVR IPCAMERA SECURITY.</p>

Tapo was created to engage in the small intelligent appliances market, to help people adopt a new smart home lifestyle at an affordable cost. That’s why we insist on Smart, Easy, Secure.

.

What should I do if I fail to configure the Tapo Smart Plug?

The Tapo app will guide you step by step during the initial configuration, but you may not be able to get through all the steps due to some interference. This FAQ will tell you what to do if you have trouble getting through a certain step.

Case 1

The phone is looking for the smart device via Bluetooth or its default 2.4GHz WiFi, if you are unable to get through this step, you will see the following error page.

Troubleshooting tips:

Tapo Smart Camera FAQ v1

Case 2

If you are unable to find your home Wi-Fi network, please refer to the following suggestions.

Troubleshooting tips:

1. The signal strength of your home Wi-Fi network is a bit weak, move the smart device closer to your router for a try.

2. Ensure your home Wi-Fi network is a 2.4GHz Wi-Fi network, the Tapo device does not support a 5GHz Wi-Fi connection.

3. If it doesn’t display the Wi-Fi name of the router automatically, please click on “RECAN” at the upper right corner to refresh the Wi-Fi list.

4. If the router’s SSID is hidden, please choose “Other” to input SSID and password manually.

5. Please change the wireless channel of the 2.4G Wi-Fi network to 1, 6 or 11.

6. Reset the device as per QIG/UG and go through the process again.

Case 3

If you are unable to get through this step, you will see the following error page.

Troubleshooting tips:

1. Ensure you have selected the correct home Wi-Fi network and have entered the correct wireless password. If the Wi-Fi network or password is incorrect, click on “Choose a Network” and select the Wi-Fi network again.

2. Make sure your smart device is within the Wi-Fi range of your router.

3. Turn your phone’s or tablet’s Bluetooth off and back on.

4. If the problem persists, try to reset the smart device as per UG/QIG, and then set it up again.

5. Check if there is a firewall on your router. If yes, please turn it off.

6. Change the wireless security type of the 2.4G network to WPA2.

7. Try to connect the Tapo plug to the hotspot of your cell phone or another wifi network. If it works, please upgrade the firmware for the plug, then reset and reconnect it to your router.

.

What features does Tapo smart plug and Tapo smart switch support?

Currently the Tapo plug and switch supports the following features:

.

How to view Tapo camera on PC/NAS/NVR through RTSP/Onvif Protocol

The Tapo camera supports the RTSP and Onvif protocol, so it can work with third-party NVR or NAS devices that also support the RTSP/Onvif protocol. If a user wants to view the live stream of the camera with a third-party app like VLC Player, iSpy, here is the method for him.

Notes:

1. The username/password is the camera account that you created via the Tapo app. If you haven’t created the username and password, please follow the instruction of Step 1 in this article.

2. The IP address is the camera’s IP address assigned by your host router. You can find it on your host router’s DHCP list or in the Tapo app (Go to the Device Settings page of the camera and tap Device Info to see its IP).

3. If you want to view the live stream of the Tapo camera with a third-party app remotely, you will need to open port 554 for the camera on your host router first. Please enable the TCP forwarding for port 554.

4. You could use ONVIF standards to add the Tapo camera with its username/password and IP address. Please see the example of iSpy in Case 2 to know how to use onvif protocal to control the camera.

5. For Tapo C310, the resolution of the stream1 is determined by the video quality set on the Tapo APP.

If you need to watch the 3MP HD Video via RTSP, please change the video quality to Best Quality on the Tapo APP and use: rtsp://IP Address/stream1

6. If the Camera is inserted microSD card and subscribed Tapo Care, its RTSP stream will fail. You need to remove microSD card or cancel Tapo Care to get its RTSP stream.

7. If you find that there’s no or very little sound when using RTSP/Onvif to watch live stream, please adjust the camera microphone on Tapo APP.

Apart from the Tapo app, Tapo cameras can work with other third-party software to use and manage your Tapo camera.

Note: Before you start, make sure the computer/NAS/NVR and your camera are connecting to the same network or can visit the public IP and port of your camera.

Step 1: Create a camera account in the Tapo app

1. On the Home page, tap on your camera model card to go to the camera Live View page (or you can click on Cameras tab>tap Manage on your camera model to go to the Live View page).

2. On the Live View page, tap the icon at the top right corner to enter the Device Settings page.

3. Tap Advanced Settings, then select Camera Account to create an account (username and password) for camera login on other portals.

You will see a prompt like below (About Camera Account), please read it and tap Understand and Agree to Use, then you can create an account for the camera.

Note: The username and password should contain 6 to 32 characters.

Step 2: Add your Tapo camera on iSpy (Example of Onvif protocol connection)

1. Run the iSpy software on your computer.

2. Click Add on the top left menu and select ONVIF Camera.

3. Enter the Username and Password that you set for your camera on the pop-up window, select Network Address, and click Next. You can customize other parameters if needed.

4. Choose the video resolution and click OK.

5. Customize the camera settings as needed, including Microphone, Talk, Motion Detection, Alerts, Recording, Images, Scheduling, and Storage. You can also change all the settings later. Click Finish to complete adding your camera to iSpy.

6. After adding your Tapo camera to iSpy, you can monitor and manage it using the app. View the live, customize motion detection, check the recordings when motion detected, set recording schedules, record videos and more.

Step 3: Watch your Tapo camera on VLC (Example of RTSP protocol connection)

1.Open the VLC software, select Media > Open Network Stream

2.Fill in the URL of the Tapo camera

The URL of the RTSP live stream for the Tapo cameras will be:

For high quality stream1: rtsp://IP Address/stream1

For low quality stream2: rtsp:// IP Address/stream2

In some software, the URL need to add the port to access live stream, the default port is 554:

For high quality stream1: rtsp://IP Address:554/stream1

For low quality stream2: rtsp:// IP Address:554/stream2

If you fail to stream the Tapo camera via the RTSP/ONVIF protocol, you may refer to the article for the troubleshooting:

https://community.tp-link.com/en/smart-home/forum/topic/652710

To get to know more details of each function and configuration, please go to Download Center to download the manual of your product.

.

How to factory reset the Tapo or Kasa smart plug

.

To restore a Tapo or Kasa smart plug to its factory default settings and re-enable the setup mode, please press and hold the power button for 10 seconds.

The LED status for a factory reset varies by model:

After a completing the reset, you can then connect and configure the device in the Tapo App.

How to avoid noise when monitoring the sound from Tapo camera

Tapo cameras are capable of not only monitoring video stream from the camera, but also monitoring sound collected by the built-in microphone on the cameras. You can turn on/off the sound feature like the monitor screen as below. But to increase or decrease the volume, you need to press the volume button on your phone.

Why is there noise?

Noise is a physical phenomenon and it’s actually inevitable. Basically, the IP cameras including other brands’ have background noise more or less. And those cameras which seem to generate less noise probably have worse sound collecting performance. Tapo cameras are designed with a sensible sound collector which might take some noise in your monitor. Even though it is inevitable at present, we are still trying our best to make improvement and searching for better solutions.

How to reduce the noise?

1.     Please keep your mobile device away from the camera as much as possible. The Tapo camera is designed for remote access and monitoring via cloud service, local usage in close range may cause interference and noise between your mobile device and the camera.

2.    Please reduce the output volume below 50% since a louder volume may enlarge noise decibel. The value between 40%-50% is suggested with not only good sound quality but also minimum noise decibel. As long keep focus on our cloud camera you will find our progress on new models.

Your understanding is highly appreciated!

How to edit Home and Away Mode for Tapo&Kasa Cameras on the Tapo app

.

The Away mode and the Home mode are two different sets of Detection, Alarm, and Notification settings for Tapo&Kasa cameras. You can tap the button on the Tapo app>Cameras tab to quickly apply the preset settings to the cameras when you are home or away.

Note:

Here we take the Home Mode as an example.

For Tapo Cameras:

1. Open Tapo APP, find the Cameras tab at the bottom, and locate the Detection Mode section.

You can tap to activate the Home or Away mode, which will overwrite the current settings of all cameras. To edit the mode settings, click the three-dots option.

2. Click on Add Devices if you want to add more cameras to the Home mode.

Click on the Edit icon at the top right corner if you want to delete cameras from the Home mode.

3. Select the camera you want to edit the mode settings. Here we take Tapo C200 as an example, and you can change the Privacy mode, Detection, Alarm, and Notification settings of the camera.

Take the Motion Detection feature as an example. You can click on Motion Detection to turn it on or off, change the Motion Sensitivity, and set the Activity Zones on the Motion Detection page.

And you can also click on Detection>Person Detection or Baby Crying Detection to turn them on or off, and tap Alarm and Notifications to configure the related settings.

4. Click on the Back icon at the top left corner of the Tapo C200 page if you have changed the configurations, and click on other cameras if you want to change their configurations.

After completely presetting the Home or Away Mode, you can tap the Home mode or Away mode card on the Tapo app>Cameras tab to switch your cameras’ settings quickly.

For Kasa Cameras:

Here we take KC115 as an example.

1. Open the Tapo app, find the Cameras tab at the bottom and you can tap to activate the Home or Away mode, which will overwrite the current settings of all cameras. To edit the mode settings, click the three dots option.

2. Select the camera you want to edit the mode settings and enter the Detection & Alerts page.

3. You can change the Privacy mode, Detection, and Notification settings of the camera.

Tap Detection > Motion Detection to edit the motion detection function. You can adjust Motion Sensitivity.

Tap Detection>AI Detection to change your AI Detection feature, such as Person Detection.

4. After editing the detection settings, tap Detection & Alerts > Notifications to customize its current settings.

After completely presetting the Home or Away Mode, you can tap the card on the Tapo app>Cameras tab to switch all of your cameras’ detection settings to the mode you want.

.

How can I find the IP address of my Tapo&Kasa camera

Note: Some Tapo battery cameras or doorbells need to work with the hub and can’t connect to the router directly, which do not have IP address.

There are two methods to find the IP address of the camera.

Here we take Tapo C200 as an example.

Method 1: Via Tapo app

1. On the Tapo app> Home page, tap your camera model card to go to the Live View page (or you can click on Cameras tab>tap Manage on your camera model to go to the Live View page).

2. On the Live View page, tap the icon at the top right corner to enter the Device Settings page.

3. Tap Device Info and then you can find the IP address of your camera.

Method 2: Via the web management page of your router

Here we take the TP-Link router Archer C7 as an example.

1. Log in to the management page of your router.

2. Go to Advanced > Network > DHCP Server and locate the DHCP Client List section to find the IP address of your camera.

How can I view continuous recordings of Tapo&Kasa cameras on the Tapo app?

This article will show you how to view continuous recordings on the Tapo app.

Note:

For Tapo Cameras

Here we take Tapo C200 as an example.

Step 1.

On the Home page of the Tapo app:

Step 2.

Click on Recording Schedule to see the detailed recording schedule settings.

Tap Edit on the Recording Schedule page if you want to change the Continuous Recording and Detection Recording schedule.

And please tap the tick icon at the top right corner to save your changes.

Step 3.

On the camera’s Live View page, tap Playback & Download, select the SD Card icon on the Playback page, select the date, and then you can drag the timeline to view the continuous recordings.

For Kasa Cameras

Here we take KC115 as an example.

Step 1.

On the Home page of the Tapo app:

Step 2.

On the Live View page of the camera, tap Playback & Download > Playback to view all recordings. Drag the timeline and you can view recordings whenever you want and wherever you are.

What can I do if the video image is upside down on my Tapo&Kasa camera

Tapo&Kasa cameras support the function of Video Rotation, and if the camera video image is upside down on the Tapo app, please refer to the following steps to correct it.

Here we take Tapo C200 as an example.

1. On the Home page of the Tapo app, tap your camera model card or tap the Cameras tab>click on Manage on your camera model to go to the Live View page.

2. On the Live View page, tap the icon on the top right corner to enter the Device Settings page.

.

What can I do if I can’t find my Tapo camera on Tapo APP?

If your device does not appear on your app after completing the configuration process, please try the following troubleshooting suggestions:

1. If you are using a Wi-Fi wireless configuration to connect your camera, please check if the camera has successfully connected to the router. You can verify whether the camera is connected to Wi-Fi by checking the System light of your camera. For most Tapo Cams, if it is not connected properly, the LED light will blink red slowly. For the HomeKit version Camera, its LED light indicator will blink blue slowly. If the camera cannot connect properly, we recommend resetting the camera to factory default settings as per the User Guide and then reconfiguring the camera.

How to reset my Tapo camera

2. Check the DHCP settings on your router and ensure that the DHCP Server of your router is enabled. If the camera has already connected to the router properly, you will see the device in the client list of your router. If you don’t know how to do this, please contact your router’s customer support.

3. Please verify if there are any special symbols in your Tapo account（TP-Link ID） password. If there are, try to remove them and make the account password simpler by only using numbers and English letters. Then reset and add the camera from the beginning again.

4. Connect your smartphone to the same Wi-Fi network as your camera and check whether you can see it on the Tapo app. If you can see it, that means the camera fails to connect to the cloud for unknown reasons and you cannot access it remotely. In this case, verify if any firewall or security settings are blocking the connection to the Cloud Server. Temporarily disable any antivirus, firewall, or security software to see if it resolves the issue

.

5. Using a public DNS server may improve the connection, try changing your router’s DNS server settings to 8.8.8.8. If you don’t know how to do this, please contact your router’s customer support.

To eliminate potential issues with the router’s Wi-Fi network, it is recommended to use a mobile hotspot and configure the Camera to test its functionality.

Here are steps for using a mobile hotspot to test the Camera’s configuration:

Preparation: We suggest having two phones. Use one phone (Phone A) to create a hotspot and use another phone (Phone B) to download the Tapo app and complete the setup process.

Steps:

1. On Phone A, disable Wi-Fi and enable only mobile data.

2. On Phone A, navigate to phone settings and access the “Personal Hotspot” or “Mobile Hotspot” option, ensuring that the “Mobile Hotspot” feature is activated. Please make sure the created hotspot operates on a 2.4GHz network.

3. Set a unique name and password for the hotspot, different from your router’s Wi-Fi, to facilitate the Camera’s connection.

4. On Phone B, download the Tapo app. Follow the app’s instructions to add the device and complete the remaining setup steps as guided by the app.

Please contact TP-Link technical support with the following information if the issue persists after the above suggestions.

1) Your TP-Link ID or cloud account.

2) The model number of your TP-Link Cam and its MAC address.

3) The model number of the host router.

4) Whether you have tried all the suggestions listed above or not. If yes, what are the results?

<p>The post Tapo Smart Camera FAQ v1 first appeared on NVR IPCAMERA SECURITY.</p>