master password generator – NVR IPCAMERA SECURITY

How to reset Password Zosi DVR NVR Poe All Model

M.Salih ASLAN — Sun, 25 Aug 2024 13:06:09 +0000

How to reset Password Zosi DVR NVR Poe All Model, ZOSI’s motto of “Security Made Easy” is what motivates us to create easy-to-use smart home devices and appliances that are designed to enrich your lifestyle. We strive to develop innovative and progressive technology products lines include WiFi/PoE IP Cameras & NVRs, Wireless Security Cameras, Security Camera Systems.

How to reset TVI DVR/ POE NVR / Wireless NVR (ZSWNVK-H) System when you forgot the password?

1) You can find the correct model number on the label at the bottom of the DVR / NVR System.

2) Find the DVR / NVR’s device ID/UID.

A. You can find the DVR’s ID on the label of the DVR / NVR.

How to reset Password Zosi DVR NVR Poe All Model

B. Or you can also reboot the DVR / NVR system and wait until Wizard Page display, then find the UID.

3) Please send us the model number and device ID / UID, we will create a super password for you.

NOTE: The User Name corresponding to super password must be ‘admin’.

Once you set super password this time, the login password should be blank

in the next time when you reboot it or log in again.

You can go to DVR’s Main Menu – Setup – User – Change password to set a new

password. (Please keep the old password blank, you just need to input the new

password and confirm password.)

Beyond that, you can also upgrade software by means of upgrade file from us, then reset password when reboot DVR.

Connecting the DVR / NVR to the internet

This method works for the following models of DVRs / POE NVRs / Wireless NVRs:

4-Channel DVRs / POE NVRs / Wireless NVRs:

ZR04ZN; ZR04ZM; ZR04FN; ZR04FM; ZR04CN; ZR04CM; ZR04JS; ZR04TS; ZR04TN

ZR04RN; ZR04RM; ZR04EN; ZR04EM;

ZR04DS; ZR04MS;

8-Channel DVRs / POE NVRs / Wireless NVRs:

ZR08ZN; ZR08ZM; ZR08FN; ZR08FM; ZR08BN; ZR08BM; ZR08CN; ZR08CM; ZR08KS; ZR08TN

ZR08RN; ZR08RM; ZR08EN; ZR08EM;

ZR08DS; ZR08DP; ZR08MS;

16-Channel DVRs:

ZR16ZK; ZR16JK; ZR16BK; ZR16CK

(You can find the model number on the label at the bottom of the DVR.)

If your CCTV DVR or NVR don’t have a built-in WiFi support, then you have to run internet cable (CAT 5 or CAT 6 Ethernet cable) to connect your DVR or NVR to the internet via the router.

Connect one end of the Ethernet cable to the Ethernet input on the back of the DVR.
Connect the other end of the Ethernet cable into a device providing an active internet connection, such as a router or modem.
Test your internet connection to confirm that it is active by going to the Network > Network screen.

1) Right click mouse—go to Main Menu > Setup > Network.

2) On the Network tab, ensure the “Obtain an IP Address Automatically” option is enabled, and that there is no information in the PPPoE fields.

3) Once you’ve ensured there is no information in the PPPoE field and that the “Obtain and IP Address Automatically” option is selected, select the “Test” option.

If “OK” is displayed, the local area network is connected successfully.

If the DVR is not able to connect to the internet, you will get a message that states “Cannot Connect to Network”.

NOTE:

In order for other devices to connect to the DVR through the router, the DHCP setting must be enabled from the router’s settings page.

If you still cannot connect to the network, please ensure that you don’t have a firewall active on your network that may be limiting the connection.

You may need to open ports 80, 5000, and 5001 on your router, if they’re currently being blocked by te firewall. This typically only happens on commercial internet accounts, as they deal with sensitive transactions, but occasionally a firewall on a residential line will also block these ports.

If you’re unsure how to open ports on your router, you will need to speak with the router manufacturer.

FAQ:

1) What’s DHCP?

DHCP is a type of internet networking approach. It stands for Dynamic Host Configuration Protocol. It means that a router assigns IP addresses to each of the devices on the network, allowing them to communicate with other devices in or outside the network.

In context of our systems, the setting related to DHCP is called DHCP server status. This setting enables your router to obtain the static IP address on the DVR and broadcast that IP to the app so it can locate your DVR. This setting needs to be enabled on a router for the apps to be able to connect to the DVR systems.

2) For example: How to set up a linksys E5350 Router?

Once you’ve logged into the router settings, you’ll want to select “configuration” at the top, and then “Connection > Local Network” in the menu on the left. You should see this page:

You’ll want to ensure the checkbox beside “DHCP server” is checked off, and set the start IP address to 100 as shown in the image. Leaving the other settings here as they default should be fine. Once this is done, select “save.” Before proceeding with the next steps, try using the app while not connected to local WiFi. If you can see the live feeds, you don’t need to complete the steps below.

If you can’t, you’ll need to open the ports in the firewall. On the left menu, select “Security”, and then “Single Port forwarding” as shown in this image:

Select the button on this page for “Add a new Single Port Forwarding”, and this window should appear:

The number you want to enter in the “To IP Address” field is the last three digits of the DVR’s static IP, which you can find on the Network page of the DVR. (Main Menu > Setup > Network)

Application and protocol can be left as they are, and you’ll want to check off the “enabled” box. You’ll need to do this 3 times, using the following information:

1.
Application Name: DVR HTTP
External Port: 80
Internal Port: 80

2.
Application Name: DVR Mobile
External Port: 5000
Internal Port: 5000

3.
Application Name: DVR E-mail
External Port: 5001
Internal Port: 5001

After filling the box with the necessary info for each port, select “apply”, and then hit the add button again to reopen the window. Once all 3 ports are opened, try testing the app again.

Note: different Routers may have different setting interfaces.

More questions, please feel free to contact us.

Our Whatsapp: +1-866-841-6932

Support Email address: service@zositech.com

Our Facebook: https://www.facebook.com/ZosiTechnology/

Support center: support@zositechhelp.zendesk.com

The post How to reset Password Zosi DVR NVR Poe All Model first appeared on NVR IPCAMERA SECURITY.

Password Reset for Night Owl DVR/NVR

M.Salih ASLAN — Mon, 07 Nov 2022 06:00:55 +0000

Night Owl Protect Password Reset

Password Reset for Night Owl DVR/NVR Don’t remember the password for your Night Owl Protect device? Follow the simple instructions below to quickly and securely reset your device password without having to contact support.

Option 1 – Reset Your Password from the App

NOTE: Ensure the DVR / NVR is powered on and connected to the Internet so it can receive the new password once you change it.

If you forgot your device password and are logged into the DVR / NVR with your Night Owl Protect account credentials, you can easily reset your password from the app. To do so:

Open the Night Owl Protect App on your Smart Device.
Tap “Forgot your password?” on the Sign In screen.
Retrieve the temporary code sent to the email address registered to your Night Owl Protect Account.
Enter the temporary code.
Create a new password and verify it.
Tap “Save Password.”
You can now log into your DVR / NVR with the updated password.

Load More : Top 25 CCTV Software Free

Watch the Short Video Tutorial Below

Option 2 – Reset Your Password Using Our Secure Web Portal

If you do NOT have your DVR / NVR connected to the Internet and do NOT wish to use the app, you can use our secure password reset portal. To do so:

Click “Forgot password” on the DVR / NVR Login screen.
Go to NightOwlSP.com/NOProtect
Create an account or log in.
Register your device if you have not already done so.
Click on “View Details.”
On the Device Details page, click on “Reset Code.”
Follow the provided instructions to reset your password.

Night Owl X App – Password Reset Instructions

The post Password Reset for Night Owl DVR/NVR first appeared on NVR IPCAMERA SECURITY.

Titanium Recorder Password Reset Guide

M.Salih ASLAN — Wed, 24 Aug 2022 19:24:24 +0000

Answer

***Make sure that the system is logged out before trying to do a password reset***

Click on the icon on the lower left hand corner of the screen. Select “Login”

You may answer your security question to unlock the device.
Otherwise, Click on “Dynamic Password”

Please have a person at the recorder provide all the information within the Dynamic Password page. Every piece of information has to be identical (Capital letters for MAC address, colons, spaces, etc.) Once this information is provided to a technician, they will provide a code to enter on the last line. The code provided from the technician is a mix of numbers and all capital letters.

After entering this information, the system will prompt that the password recovery was successful and default the admin password to “123456” or allow you to enter a new one.

Password Resetting, defaulting a TVT IPC using IP Tool

Answer

Open up the IP tool, make sure that the computer is connected to the same network as the camera.

Select the camera and find the MAC address. Enter the MAC address in the password reset area. After entering it and clicking OK, you will have 30 seconds to power down that camera. Once power cycled, the camera will be back to default settings.

The post Titanium Recorder Password Reset Guide first appeared on NVR IPCAMERA SECURITY.

CloudSEE How to reset device password

M.Salih ASLAN — Mon, 27 Jun 2022 20:16:26 +0000

How to reset device password?

Ans:

For resetting the password, we need the error code generate in the device. Send the error code using the form

https://forms.gle/MvHofjk2PXFxdHTB8

The temporary password is randomly generated based on the error code and the validity of the temporary password is just for 3days only. So, please make sure you modify the user account of your device or factory default the device before temporary password expires. Otherwise, the device will generate a different error code after 3days.

IPC CloudSEE2.0

If you are using IPC stand alone, connect the IPC with VMS-6100 and add the device into to software. Then the software will display the error code.

Submit the form with the error code and you will receive temporary login password in your email. Access the web interface of the IPC by input the IP address of the IPC into the web browser address bar. Input the temporary username and password received in your email and login the device. Then go to System then User and modify the current user. Input the new password and save the settings. Or go to Maintenance and click Factory Default button to reset the device.

If you are using IPC with NVR, the error code of the IPC will display on the video preview screen and channel list as well. Submit the form with error code and you will receive temporary login password in your email. Go to Channel list an select the IPC you need to change the password. Click on Input PWD button and input the temporary username and password you received. After you check the Status, the IPC will showing connected. Go to Camera option and click the icon under User column of the desired IPC then modify the password. Or click the icon under Maintenance column of desired IPC and click Factory Default. Once IPC user account modified or factory defaulted, you need to go back to the Channel list and input the new password by clicking Input PWD button if you modify the account. If the IPC is factory defaulted, then remove the existing IPC and search and add it again.

2.IPC CloudSEE1.0

If you are using IPC stand alone, connect the IPC with VMS-6100 and add the device into to software. Then the software will display the error code.

Submit the form with the error code and you will receive temporary login password in your email. Access the web interface of the IPC by input the IP address of the IPC into the web browser address bar. Input the temporary username and password received in your email and login the device. Click on System Config on the top of the main page, the IPC menu will open. (Please make sure you install the Web plugin and enabled the ActiveX controls.) Click System then User Setting. Select the user account from the list and click Modify button. Input the new password and save the settings.

If you are using IPC with NVR, the error code of the IPC will display on the video preview screen and channel list as well. Submit the form with error code and you will receive temporary login password in your email. Right click on the video preview screen and select IP Camera. Select the camera you want to reset the password and click Set IPC. Then input the temporary username and password you received. After you check the Status, the IPC will showing connected. Go back to the video preview screen then right click on the channel you want to reset and then choose Remote Setup. Click User under General menu. Select the user account you want to reset and click Edit button. Then input new username and password. Or click Maintenance under system then click Reset Factory to reset the IPC. Once IPC user account modified or factory defaulted, you need to go back to the Channel list and input the new password by clicking Set IPC button if you modify the account. If the IPC is factory defaulted, then remove the existing IPC and search and add it again.

3.NVR CloudSEE2.0

When you try to login with incorrect password, the NVR GUI will display the error code. Submit the form with the error code and you will receive temporary login password in your email. Login with the temporary username and password then right click on the video preview screen and select Main Menu. Login with username and password. Then click System icon. After that click User option then click the icon under Edit column. Then modify the password. Or Click Maintenance then System, click Reset button to factory default the device.

4.NVR CloudSEE1.0

When you try to login with incorrect password, the NVR GUI will display the error code. Submit the form with the error code and you will receive temporary login password in your email. Login with the temporary username and password then right click on the video preview screen and select System Setup. Click User under General menu. Select the user you need to modify, then click Edit button. Input the new username and password. And save the settings. Or go to Maintenance under System menu. Then click Reset Factory button.

Note: If you do factory default the NVR, you need to configure the entire system again.

The post CloudSEE How to reset device password first appeared on NVR IPCAMERA SECURITY.

Reolink NVR IPCAM how to reset password methods

M.Salih ASLAN — Wed, 15 Dec 2021 18:50:13 +0000

How to Reset Reolink NVR Recorder’s Password (New UI)

If you forgot your NVR password, you may refer to the following two methods to reset your password.

Method 1. Answer the Security Question

Step 1: Connect the NVR to a monitor by HDMI cable. (If there is no display, please connect it to a VGA monitor and change the pixel to 1920*1080.)

Step 2: Login in the NVR and click Forgot Password button.

Step 3: Click the Answer box to answer the Security questions and click the Go to Reset to factory reset the NVR.

Method 2. Reset the Password by Pressing the Reset Button

Step 1. Reboot your device and make sure you can see the live-view on the monitor screen.

Note: Please stay on live view page through the whole process. Please make sure that the NVR system is on live view page instead of the logging page while pressing the button
Press the USB mouse and make sure that all icons are hidden and the NVR is in live view on the monitor.

Step 2. Remove the outer casing of the NVR using the screwdriver.

Step 3. Press the Reset button for 10 seconds until you hear the buzzing “bee”.

The Reset button of 8-Channel NVR:

The Reset button of 16-Channel NVR:

Step 4. After the Setup Wizard pops out, create a new password and follow the Setup Wizard to complete the setup.

Method 3. Reset the Password via Super Password

If you forget the password of Reolink NVR, you may create a super password via Super Password application, then use it to reset your NVR password and set a new password.

Note: Super Password is only for Windows OS, not for Mac OS.

Here we will guide you to reset the password of your PoE NVR by using the super password in the following steps.

Note: To get the Super Password application package, you can download it from the link below: https://s3.amazonaws.com/reolink-storage/website/download/SuperPassword.exe. If you fail to download it, you can contact support.

Step 1: Connect the NVR to a monitor by HDMI cable. (If there is no display, please connect it to a VGA monitor and change the pixel to 1920*1080.)

Step 2: Login in the NVR and click Forgot Password button.

Then you will get this page:

Step 3: Open Super Password application installed on the computer, then input the random code.

Step 4: Click Create Super Password to create a super password.

Step 5: Go back to the System Login interface on the monitor of NVR. Input the generated super password, then click the OK button.

Note: When you finished the steps above, the password of your NVR will be successfully reset and the old password will be removed.

Step 6: Create a new password for logging in.

Step 7: Start to set up configurations on the Setup Wizard interface.

Step 8: Click Finish button when you set up all the configurations.

Done! You have successfully reset the password of your NVR. Now you can make login with the new password.

How to Change User Password via the Client (New Client)

The following steps describe how to set up Manage User via new Reolink Client. You can also set up Manage User via Reolink App.

Step 1. Launch Reolink Client and log in to your device.

Step 2. Click Device Settings –>System ->User Management, then select the user and click the Change Password button.

Notes：

The admin password can be modified while the name-“admin” can not be changed.
You can also add other common users on Add User interface and modify its’ password or delete the user on this page.

Step 3. Type in the old password (If no password, please leave the password box blank) and set a new password, then click Save.

How to Enable/Disable Password via Reolink WiFi NVR

This article shows you how to enable/disable password via Reolink WiFi NVR.

Step 1. Log in Reolink WiFi NVR with your cameras.

Step 2. Go to the menu page, and click wizard.

Step 3. Click to enable the password that you’ve set.

You don’t need to choose it If you want to disable the password.

Note: After setting to enable the password, you’ll need to log in to the system by inputting the password you’ve set.

The post Reolink NVR IPCAM how to reset password methods first appeared on NVR IPCAMERA SECURITY.

Use Super Password to Reset on Reolink NVR

M.Salih ASLAN — Fri, 19 Nov 2021 18:19:04 +0000

If you forget the password of Reolink NVR, you may create a super password via Super Password application, then use it to reset your NVR password and set a new password.

Note: Super Password is only for Windows OS, not for Mac OS.

Here we will guide you to reset the password of your PoE NVR by using the super password in the following steps.

Step 1: Connect the NVR to a monitor by HDMI cable. (If there is no display, please connect it to a VGA monitor and change the pixel to 1920*1080.)

Step 2: Login in the NVR and click Forgot Password button.

Then you will get this page:

Step 3: Open Super Password application installed on the computer, then input the random code.

Step 4: Click Create Super Password to create a super password.

Step 5: Go back to the System Login interface on the monitor of NVR. Input the generated super password, then click the OK button.

Note: When you finished the steps above, the password of your NVR will be successfully reset and the old password will be removed.

Step 6: Create a new password for logging in.

Step 7: Start to set up configurations on the Setup Wizard interface.

Step 8: Click Finish button when you set up all the configurations.

Done! You have successfully reset the password of your NVR. Now you can make login with the new password.

How to Reset Reolink NVR Recorder’s Password

If you forgot your NVR password, you may refer to the following two methods to reset your password.

Method 1. Reset the Password by Pressing the Reset Button

Step 1. Reboot your device and make sure you can see the live-view on the monitor screen.

Note: Please stay on live view page through the whole process. Please make sure the nvr system on live view page instead of the logging page while pressing the button
Press the usb mouse and make sure all icons hidden and nvr in live view on the monitor.

Step 2. Remove the outer casing of the NVR using the screwdriver.

Step 3. Press the Reset button for 10 seconds until you hear the buzzing “bee”.

The Reset button of WiFi NVR:

The Reset button of 8-Channel NVR:

The Reset button of 16-Channel NVR:

Step 4. After the Setup Wizard pops out, create a new password and follow the Setup Wizard to complete the setup.

The post Use Super Password to Reset on Reolink NVR first appeared on NVR IPCAMERA SECURITY.

How to Reset Password of DVR or NVR via the Mobile Client

M.Salih ASLAN — Thu, 11 Nov 2021 08:27:03 +0000

If you forgot the admin password of a DVR or NVR, you can reset the password by scanning the QR code generated on the local GUI of the device.

The flow chart of the password resetting process is shown below.

Figure 1. Flow Chart

Reserve Email Address for Resetting Password

You should have reserved email address for resetting the admin password of NVR or DVR if you want to change the password by scanning QR code.

Upgrade the firmware of the NVR or DVR to make the device support self-service password reset.
If the device is inactivated, check Reserved Email Settings when activate it. For details about activating NVR or DVR, see the user manual of the device.

Note:

The DVR or NVR should support the function.

Go to Configuration > User on the local GUI of the device.
Select admin user and then click Edit.
Enter the password of the device in the Old Password field.
Click the Settings icon in Reserved E-mail Settings field.
Enter an email address for receiving verification code, and then click OK.

Generate QR Code on Device Local GUI

If you forgot the admin password of the DVR or NVR, you can generate a QR code on the device’s local GUI and then scan the QR code via the Mobile Client to reset the admin password.

You should have reserved an email address for resetting password.

Note:

The DVR or NVR should support this function.

On the login page of the device’s local GUI, click Forgot Password.
Select Verify by Reserved Email and then click OK.
Read and agree the Legal Disclaimer, and click OK to continue.

The QR code for resetting password pops up.

Reset Password of DVR/NVR by Scanning QR Code

If you forgot the admin password of DVR or NVR, you can reset the password by scanning the QR code generated on the local GUI of the device.

You should have allowed the Mobile Client to access your phone’s camera.
You should have reserved email address for resetting device password and generated QR code on the device’s local GUI. For details, see Reserve Email Address for Resetting Password and Generate QR Code on Device Local GUI for details.

Tap More > Reset Device Password to enter the Reset Device Password page.
Scan the QR code on the local GUI of the DVR or NVR.
A verification code will be sent to the reserved email address.
Note:
- The verification code will be valid for 48 hours.
- If you reboot the device or change the reserved email address, the verification code would be invalid.
Go to the device’s local GUI.
Enter the received verification code on the Verify by Reserved Email window and then click OK to continue.
Create a new password and then confirm the password.

The post How to Reset Password of DVR or NVR via the Mobile Client first appeared on NVR IPCAMERA SECURITY.

How to Reset the Password of Annke Hikvision POE Cameras?

M.Salih ASLAN — Mon, 01 Nov 2021 18:37:37 +0000

After you reset the password of Annke NVR or add a new POE camera to the Annke NVR, you may find the cameras cannot show images.
Because: For the camera to work properly, the password of the cameras should also be reset.

Below are the steps to reset the cameras’ password.

Video Guide:

Part #1: Export the file in ‘.XML’ format and send it to ANNKE support

Part #2: Import the file (also .XML format) received from ANNKE support

Text Guide:

1. Download and install a software SADPTool on your Windows computer. Here is the download link: For

For Windows: https://download.annke.com/CMS/SADP_v3.0.2.4.zip

For Mac: https://download.annke.com/document/Computer_Software/SADPTool.pkg.zip

2. Connect your computer to one of the POE ports (i.e. the camera port) on your NVR.

3. Run the software SADPTool and it will detect the camera‘s IP.

4. Select the camera‘s IP and click forget password at the right bottom of the software.

5. Click “Export” and select the path to export an XML file. Please export the file of each of your nonworking cameras.

7. Send us the XML file and we will give you another key file to continue the password reset.

NOTICE:
1. Please do NOT turn off your NVR and the SADP software after you exported the files. Otherwise, the exported file will be invalid immediately.
2. Please use the key file from us as soon as possible because it’s only valid for 24 hours.

8. Select “Import” and choose the file we sent to you.
Input your NVR’s password as the new password and confirm the password of the camera. Click “Confirm” to finish reset.

NOTICE:
Please follow the matching guide in our email to import the XML file to the cameras accordingly.
(For example, we will say “xxxxxx.xml” for “xxxxxx.xml”)

After resetting the cameras successfully, please turn off your NVR, wait for about 10 seconds, then turn on the NVR again.

The post How to Reset the Password of Annke Hikvision POE Cameras? first appeared on NVR IPCAMERA SECURITY.

XMEYE Devices Password Reset New Method

M.Salih ASLAN — Sun, 13 Jun 2021 19:51:20 +0000

XMeye – What to Do If You Forgot The Admin Password of The System?

For this system, there will be some optional way to reset the password, please kindly find which way is suitable for you.

Here are the methods to reset the password.

1. Please contact technical support to get the general super password according to the system date displayed on your monitor.

2. Can you see a “?” on the login page,? If yes, please refer to this link to find the key number and send it to technical support, and then please don’t turn off your DVR.
After technical support gets your code, the agent will generate a super password for you.

3. Can you see a small QR code after you input the wrong password 5 times? If yes, please click it and make it enlarge, and then please send the full and clear picture of this QR code to the technical support. After the technical support gets your picture, the agent will generate a super password for you.

4. If the above method all not suitable for your case, please kindly note that can you see some prompt message on your login page, such as
“System maintenance, please contact the installer, SN: XXXXXXXX“. If it is in this case, please kindly send us a clear picture of this prompt message window, and then please inform us of the system date displayed on your monitor. After we get your pictures, we will inform you how to do it for the next step.

XMeye – How to Change the System’s Password?

The system’s default password is blank(nothing). We suggest you change the system‘s default password when you hook up the system for the first time to protect your privacy. Below are instructions on how to change the password.

Here are the steps:

1. Use the system’s user name admin and default password blank to log in system.

2. Right click mouse and select the Main Menu

3. Go to advanced

4. Go to Account

4. select admin and click Modify Pwd

5. Input the new password and confirm it. Since the old password is the default password which is blank, leave the old password box blank.

Click OK to save.

XMeye – How to Use Security Questions to Reset Your System’s Password?

Steps:

1. Please go to this login interface and tick the ‘?’ option.

2. You will see these are two Security Questions like the picture below shows. And please input the Answers and then tick OK.

3. Then the system will automatically pop up this interface like the picture below shows. You can input the new password that you want to set up.

4. Then, there is a message shows Modify Password Successfully.

The post XMEYE Devices Password Reset New Method first appeared on NVR IPCAMERA SECURITY.

Dahua DVR/NVR Hard Reset Video

M.Salih ASLAN — Mon, 31 May 2021 08:33:10 +0000

In this video , we’ve one Dahua DVR that is protected with password and unfortunately the password is forgotten. If you want to know how to reset password for Dahua DVR then this video is for you. Moreover, I explained some technical steps to hard reset admin password for Dahua DVR. Some of Dahua DVR has no reset button on main board, so in this video I showed the trick with the use of you can reset the admin password of Dahua DVR. The same method will apply on all Dahua DVR if there is no reset button. How to Reset admin password Dahua XVR1B04H – XVR1A08 Dahua Hard reset Dahua XVR1B04H Hard reset Dahua XVR1A08 Dahua DVR Reset Without Reset Button In case you require any further information about any DVR, feel free to ask me in comments. I’ll answer everyone’s queries.

The post Dahua DVR/NVR Hard Reset Video first appeared on NVR IPCAMERA SECURITY.