We can talk directly on phone app for asking courier to put package to a certain place you point, and hear sound from app or TV monitor connected to NVR

We could be alerted any time a person enter your property by receiving push notification from free phone APP, and the alarm light will be triggered to drive away the suspicious objects ( Note: APP has No Monthly Fees)

High Resolution 2592 X 1944 pixel to provide your vivid and clear image no matter in day or night, and IP 67 Waterproof to withstand Changeable Weather like Snowy/Rainy Day

We can customize the surveillance area or set a line for human/vehicle, and the alarm alerts will be triggered when detecting human/vehicle crossing the line or intruding the alarm area （These function may only work with Hiseeu NVR）

Version 2020-2022 PoE System FAQs in total

.

Further support, plz email us at email love@hiseeu.com

Or contact us at +1 917 688 2228

.

Important Notes:

These FAQs are only adaptable to following Models NVR Model : H5-NVR-P-8,

Camera Model: HB215-PA, HB212-PA, HB915B-PA

Mobile Phone APP: XMEye Pro         PC Client :VMS

Hisseu PoE Camera System User Guide v1

Contents:

A:  Forget NVR Password?

B:  Add Device on PC Client Software (VMS）?

C:  How to Sign up account on Mobile APP (XMEye Pro) ?

D:  Add Device on Mobile Phone APP (XMEye Pro)?

E:  How to enable Alarm Notifications on APP XMEye Pro?

F:  Configure Offline Camera or Add a New Camera?

G:  No Video Display on TV Monitor Or Blank Screen?

H:  Why DVR/NVR can’t record or playback video?

.

Detail Solutions:

A:  Forget NVR Password?

1. Please click the mouse from the home screen, and “Logo Out–>Log Out”

2. Right click the mouse again, click “ Main Menu”–> “Forget password –> Forget answer”, you will see the “QR Code”

3. Please open your mobile APP “XMeye Pro”

（1）Click the Scan icon on the top left corner

（2）Scan the “CAPTCHA” on the TV monitor, then you will get a code from the mobile phone APP or from your email, and enter the code into “CAPTCHA”, so you will be able to reset the password on the Monitor connected to DVR

.

B: Add Device on PC Client Software (VMS）?

VMS download link:

For Windows （2023 newest version）

https://download.xm030.cn/d/MDAwMDE0OTM=

For Mac ( 2022 version)

https://download.xm030.cn/d/MDAwMDA2NDA=

1. Download PC Client “VMS” and installed

2. Login with the default User Name and Password. Click “SIGN IN”.

Default User name is: admin

Default Password is: admin

3. Navigate to “Device Manager”–>”Manual Add”

4. Login Type: Cloud ID Device Name:

Name Your Device as you like

Cloud ID : Device Serial Number. We need to go to the TV Monitor connected to the NVR , and find out the information on TV Monitor UI, then right click the mouse to navigate to the path of “Main Menu–>Advanced–>Version” to find out the information “serial number”

User Name and password: Input the user name and password that you created for the NVR , and we also need to find this from the Monitor UI.

.

5. Navigate to “Live View”, Click on the device name(serial number), then select “Open All By Sub Stream”

.

C:  How to Sign up account on Mobile APP (XMEye Pro) ?

Please follow these instructions to sign up for an account via your mobile number.

1. Click on Sign Up

2. Sign Up by email or Select Mobile Number

3. Select the correct country code +1, input your mobile number and click on “Get code”

4. A code will be sent to the mobile phone number, input the verification code and continue.

.

D:  Add Device on Mobile Phone APP (XMEye Pro)?

Steps:

–>1. Please connect the NVR/DVR box to your Router via Network Cable; (Some customers think it can support WIFI connection, while wired systems only support wired router connection, and have to be wired to router via ethernet cable)

–>2. Go to Monitor UI Interface, and Navigate to “Main Menu > Network > Net Service”, if the “Cloud Status” shows connected, means NVR/DVR is online (Please skip step3),

–>3. If the cloud status shows “Probing DNS”, Please Navigate to “Main Menu > Network > Check the icon of “Enable DHCP”–>Apply;

–>Reboot the DVR by unplugging the power adapter and re-plug it, then double-check the cloud status ( only cloud status shows )

–>4. Go to your TV Monitor, navigate to “Main Menu–>Advanced–>Version”–> You will see the serial number.

The QR code contains Serial number info. We need this information after we add the device to mobile phone APP

–>5. Open the mobile APP “XMeye Pro” and register an account by your email first

–>6. Click”+” to add device–>Choose “NVR”

Device Serial Number: Click the “Scan” icon to Scan QR Code On the NVR UI Interface (Main Menu–Advanced–Version), (QR code contains username and password)

No need to input the username and password manually.

And click “OK”, and go back to the Device page on App,and you will see the device shows status:online ,

E:  How to enable Alarm Notifications on APP XMEye Pro?

1.Make the Alarm setting is already set on Monitor UI Interface

2. Please right-click mouse and navigate to “Main Menu–> Alarm–>Motion Detect/Human Detect/Face Detect–> Enable “Mobile Reported”–>click “OK”

(Default Setting is for Channel 1, Please select “All” channels.)

2.Open “XMeye Pro” mobile App, and navigate to “Event–>Device (the one you named)–>Enable “Allow Notifications”

.

F:  Configure Offline Camera or Add a New Camera?

—>1. After connect the camera to NVR via network cable, if the camera power on properly, the camera’s indicator light should be blinking.(see picture attached)

.

When you cover the camera’s photocell or put the camera in dark place, the infrared LED should turn on red color.

—>2. If camera powered on properly please follow below instructions.

1.Right-click mouse navigate to “Quick Setup(or Channel Set) –>Cancel

2. In the second box, if any camera status is offline or not connected, please select it and click ”Delete” first

3. Click “Search”, can you see new IP address showed on the topper box?

4. Select the IP address in topper box and click Network–>Auto Assigned–>OK

5. If auto assigned successfully, please click “Add” to add the camera.

.

.

G:  No Video Display on TV Monitor Or Blank Screen?

My UI Interface shows “No signal” or “Black Screen” ？

We need to divert this issue into two situations:

1.NVR Indicator light is on:

(1) Cause: The camera system’s video output resolution is 1080P. If your TV monitor resolution is below 1080P, this issue will occur.

Steps:

Please right-click and hold your mouse for over 10 seconds to see if the system can reboot or not. Or, please try to connect the system to another TV monitor with a higher resolution (above 1080P)

.

(2) Cause: The hard disk drive inside of the DVR box is broken, and use the screwdriver to open the DVR box to unplug the wires of the hard disk drive, and reboot the DVR to have a try. If the DVR box can be rebooted after unplugging the wires of the hard disk drive(HDD), which means the HDD is having an issue, and needs a replacement, plz contact email love@hiseeu.com for replacement HDD

After steps, if the thing still cann’t be resolved, which means the NVR box is broken, plz contact email love@hiseeu.com for replacement NVR box if their warranty is still 1 year

.

2.NVR Indicator light is off:

(1) Cause: The power adapter 52V 2.5 A connected to the NVR box is broken

Step: Use another power supply 52V 2.5 A to power on the NVR unit to have a try ( If you do not have a spare one, can contact us to buy a new one or we send you a new one if your warranty is still under 1 year )

.

(2) Cause: The hard disk drive inside of the NVR box is broken Step: Use the screwdriver to open the NVR box to unplug the wires of the hard disk drive, and reboot the DVR to have a try. If the NVR box can be rebooted after unplugging the wires of the hard disk drive(HDD), which means the HDD is broken, and needs a HDD replacement, plz contact email love@hiseeu.com for replacement HDD

.

H:Why DVR/NVR can’t record or playback video?

.

If HDD(Hard disk drive) is having issue or something wrong with record setting, the DVR can’t record/playback the video

.

1.Check if the hard drive status is normal or error

Navigate to NVR/DVR Monitor UI Interface: Navigate to “Main Menu–>Advanced–>HDD info”

If status shows “Error” or No hard drive info , which means the hard drive is broken. (need to replace hard dirve)

2.Check the record plan is set up for 24/7 continuous recording

Navigate to “Main Menu–>Record Conf”

Channel : select “All”

Period: “00:00-24:00”

Select “Regular”

3. Please make sure the HDD was set up to “Overwrite”. (if it was set to “stop”, the system would stop recording when the storage is full)

Navigate to “Main Menu–>General–>Storage Full”

Add Device on Guard Station PC Client Software

Add device to “Guard Station” Download link: https://www.dropbox.com/sh/jeftu4sqwy4y1u8/AAD4PkyEJxg6j4H1n20PxBkZa?dl=0  

.

Please sign up for the mobile APP(Guard Viewer) account and add the device first.

Download and run “Guard Station” on the PC

1) Please Navigate to “Device Management”> “Cloud Device”> Click on “Login”

2) Login with your APP account and password.

3) After Login, the device you added to the APP will list here

Please click on “Control Panel”> “Live View”> Double-Click Camera to load the live view video

Add Cameras to NVR or PoE Switch (Router)

Add Cameras to NVR/ PoE Switch or Router

1. Add camera via NVR PoE Port

• If the camera is connected to NVR PoE port directly, the IP address

range should be modified to “172.16.0.X” (X is between 2 to 255)

Please right-click mouse and navigate to Camera

For brand new camera (password is 123456 by default), NVR will detect

and add camera automatically.

If the camera’s user name or password has been changed, you are required to input the info manually.

Move the mouse to the status icon , you will see the error message. “Offline [incorrect Username to Password]”

Please click on the edit icon to input password manually and click on “OK” to continue.

2.Add Camera to NVR via PoE Switch or Router

NVR will detect the camera under the same WLAN and list IPC here

• Click on plug icon to add the camera. If the camera has default user name: admin, password: 123456.

NVR will add it automatically.

• If the camera’s password has been changed, please click on the setting icon to modify the info.

• In this situation, the camera IP address range should be the same as NVR’s IP range

(You can check NVR IP by navigating to Network>Basic> TCP/IP). If not, please contact the technician to modify the camera’s IP first.

Camera Not working

Camera not working?

1.(Port issue) Insert the camera to another port of the NVR to have a try, and wait at least 5 minutes

2. (Camera issue) Make sure if the camera infrared light will turn on red or not in the night time

3. Also plz right click your mouse to “Menu-Camera”, and take a photo of this whole page and send it to us

（Check how many cameras are discovered）

Also go back to the home screen and Check connection status, to see if it shows” Network disconnected” or “incorrect user name and password”

Device Offline on APP or NVR?

Device Offline on APP or NVR?

If the device shows offline on mobile phone app  “Guard Viewer” , we need to make sure the NVR is connected to network perfectly or not

Go next to your Monitor that connected to NVR, and check out the network status

first navigate to this path first : “Menu–Network–Basic–P2P” , also check the device status is online or not,

if it shows: network disconnected, plz enable the DHCP in this path ” Menu–Network–Basic-TCP/IP ” and click “Apply” . After that, go back to “P2P” and check if the device status is online or not

Also , please make sure the PPPOE needs to be disabled, plz navigate to “Network–Advanced–PPPoE”

Enable Alarm light on Each Camera?

Enable Alarm light on Each Camera?

.

(Alarm light would only work during the night time when the alarm was triggered)

.

1. Set up the Alarm light First Right-click your mouse to “Menu– VCA — Intrusion Detection/Crossing Line Detection– Triggered Actions” , and draw the rules for the alarm type

After you set up an alarm type (Like”Intrusion Detection”, or “Crossing Line Detection”), Click on “Alarm Linkage”, you will have the option to Enable “Alarm Light” (Spotlight is only Available During the Night)

2. Enable Alarm Light on “Triggered Action– Alarm Light” for each channel, and Click “OK”

Forget NVR Password？

If you forget your current password, please follow the instructions to reset it.

1. In the system login interface, please click on “Enter Password” > “Forgot Password”

2.If you filled in your email address as a reserved email when you set up the system, you can reset the device password via the APP(Guard Viewer) by navigate to “Me–General–Forget Device Password”

3.Scan the above QR code by app and the security code will be sent to your email address.

4. Enter the security code from email to reset the password

Additionally, If you the email doesn’t belong to you, plz contact us at love@hiseeu.com for more support

Add Device to APP(Guard Viewer)

.

Auto add is not suggested. Please tap on “Later” if you see this message box.

.

In this situation, it will Auto Search to discover the NVR device connected to the local network. But once your mobile phone disconnects with LAN WiFi, you will not be able to view it anymore.

Please Add devices in this way

1.  Please Tap on “ Menu” icon> Tap on “Devices”> “Add”,

2. Tap on “Scan”> “OK” to scan the NVR QR code

3.Navigate to “Menu– Network> Basic> P2P”

• If the Device Status is “Network connected…” , means device is online   and ready for remote view

• If the Device Status is “Offline” , please check the network connection first, if the problem remains, please feel free to contact us at Love@Hiseeu.com   

After you add the device successful, the “Device status” will be “Online”, and your APP account username will display here.   • You can check your APP user name by navigate to “Me”

• If the username doesn’t belong to you, please click on “Delete” and add it again.

4.Add NVR by scanning device QR code and click on “save”

5.   Please Tap on “Menu ” icon, Tap on “Live View” “Add”

6. Select the device and tap on “Start Live View”

Human Tracking/Detect for Model PK-4YHD985-CT ?

1.To enable human tracking , Set preset point “21”. Here is the video link for your reference: https://www.amazon.com/live/video/07adae4ec34a47618bd754cc6c1f8966?ref_=dp_vse_ibvc1

2.To enable human detection, plz go to this path “Menu–Alarm-Motion” , and choose the camera you want, to enable it

(This doesn’t support customize area)

No Video on TV Monitor or blank Screen?

.

The camera system video output resolution is 1080P, if your TV monitor resolution below that will occur this issue.

.

If possible, could you please try to connect the system to another TV monitor with a higher resolution(above 1080P).

Or, please hold your mouse wheel over 10seconds to see if the system can reboot or not.

If not, plz contact us for further support

How to share Device to others via APP Guard Viewer?

.

One device linked to One User ONLY. The NVR system ONLY can be controlled by one authorized account, who can share the device with others in order to prevent attacking or hacking.

For admin user, please follow the instructions to share the device with others:

.

1.Type on “Menu Icon ” and navigate to “Devices”

.

2.Tape on “… ” > “Share”, You can select a single channel to share or select the entire NVR system to share

(1) Share device by typing in the user name you wanted to share with and selecting function as needed.

• The other user needs to register a Guard Viewer APP account and provide the user name for sharing.

• After that, when this user login the APP will find the device by navigate to “Devices”

(2) Share device by generate a QR code

• Create a sharing password and set the valid period

• Click “Generate”, your APP will generate a QR code

• Other users can use the APP to add the device by scanning the QR code you sent

Download the mobile APP and Sign up for an Account

.

1. Download and install the app.

Please scan the QR code to download the free APP “Guard Viewer”

You also can visit the Apple Store or the Google Play Store to download the Guard Viewer app for iOS or Android devices. Alter installation, tap the icon to launch the app.

2.Register an account and login

For first time use, please create a new account and add the following steps:

Please tap Sign up and follow the on-screen prompt to register an account by email.

<p>The post Hisseu PoE Camera System User Guide v1 first appeared on NVR IPCAMERA SECURITY.</p>

How to Change the Password on a 5.0 UI IP Camera

.

IPCamera/Change Password 5.0 UI

Step by Step Instructions

1. Input the camera’s IP address into a web browser.
Enter the current username and password of the camera into the designated fields.
Click the Login button to log in

2. Select the Gear icon at the top right.
Then select the System option from the drop-down list

3. Select Account on the left.
Then select the User tab at the top.
Click on the Edit (Pencil) icon to the right of the user account who’s password you want to edit

4. Enable the Change Password slider.
Then enter the current password in the Old Password field.
Enter the new password you want to change it to in both the New Password and Confirm Password fields.
Click on OK at the bottom

5. Once the new password is successfully changed, you will see “Modify User Succeeded” at the top

Dahua IP Camera 5.0 UI Setup

How to Set the Date and Time on a 5.0 UI IP Camera

.

IPCamera/Set Date and Time 5.0 UI

Description

This guide will show you how to set the Date and Time on a IMaxCamPro IP Camera with the 5.0 User Interface

Prerequisites

Step by Step Instructions

1. Input the camera’s IP address into a web browser.
Enter the username and password of the camera into the designated fields.
Click the Login button to log in

2. Select the Gear icon at the top right.
Then select the System option from the drop-down list

3. Select General on the left.
Then select the Date & Time tab at the top.
To set the date and time without an NTP server, select Manual Setting. Then adjust the Time, Time Format, and Time Zone. (You can press Sync PC if you want to pull the time from the PC you are using. The Time Zone still needs to be set manually though.)

To set the date and time with an NTP server, select NTP. Then fill in the information for a functioning NTP server. (This will only work if the camera has access to the internet.)
For locations that use Daylight Saving Time, enable the slider below DST and select the dates and times that Daylight Savings starts and stops.
When you are done adjusting settings, select Apply at the bottom to save the settings.

How to Set the IP to Static on a 5.0 UI IP Camera

.

IPCamera/Set IP to Static 5.0 UI

How to Set IP Settings to Static on a 5.0 UI IP Camera

Description

This guide will show you how to set the IP settings to static on a ImaxCamPro 5.0 User Interface IP Camera

Prerequisites

Step by Step Instructions

1. Input the camera’s IP address into a web browser.
Enter the username and password of the camera into the designated fields.
Click the Login button to log in

2. Select the Gear icon at the top right.
Then select the Network option from the drop-down list

3. Select TCP/IP on the left.
Click on Static next to “Mode”.
Then fill in the IP Address, Subnet Mask, Default Gateway, and DNS settings below that. (You can press the “Test” button if you want to see if that IP address is free on your network.)
When you are done adjusting settings, click on Apply at the bottom

How to Configure Recording to an SD Card on a 5.0 UI IP Camera

.

IPCamera/Configure Recording SD Card 5.0. UI

How to Configure Recording to an SD Card on a 5.0 UI IP Camera

Description

This guide will show you how to configure recording to an SD Card on a IMaxCamPro 5.0 User Interface IP Camera

Prerequisites

Step by Step Instructions

1. Input the camera’s IP address into a web browser.
Enter the username and password of the camera into the designated fields.
Click the Login button to log in

2. Select the Gear icon at the top right.
Then select the Storage option from the drop-down list

3. Select the SD card from the list by enabling the radio button on the left.
Click on Format at the top to wipe all the data on the SD card and configure it for recording on this camera.

4. Click on the Home icon at the top left.
Select Record. (If you don’t see it on the main page, click the right circle at the bottom to switch pages.)

5. Select the Record Control tab at the top.
Adjust the settings on this page as desired:

When you are done adjusting settings, click on Apply to save the settings

6. Select the Time Plan tab at the top.
Adjust each Event Type on the weekly calendar.
When you are done adjusing the schedules, click on Apply to save your changes

7. Select the Storage tab at the top.
Adjust the settings on this page as desired:

When you are done adjusting settings, click on Apply to save the settings

How to Playback Video from an SD Card on a 5.0 UI IP Camera

.

IPCamera/Playback Recording SD Card 5.0. UI

How to Playback Video from an SD Card on a 5.0 UI IP Camera

Description

This guide will show you how to view recorded video footage from an SD Card on a IMaxCamPro 5.0 User Interface IP Camera

Prerequisites

Step by Step Instructions

1. Input the camera’s IP address into a web browser.
Enter the username and password of the camera into the designated fields.
Click the Login button to log in

2. Click on the Home icon at the top left.
Select Record. (If you don’t see it on the main page, click the right circle at the bottom to switch pages.)

3. Select the Search Video tab at the top.
Select the start date and time, and the end date and time on the left.
Then click Search below that.
All the recorded footage on the SD card in the time range will appear.
Double-click on the specific clip you want to play

4. Move the slider at the bottom to adjust the playback time.
Use the controls to play, pause, rewind, fast forward, or jump between clips

IPCamera/Password Reset 5.0. UI

.

IPCamera/Password Reset 5.0. UI

How to Reset the Password on a 5.0 UI IP Camera

Description

This guide will show you how to reset the password on a IMaxCamPro 5.0 User Interface IP Camera

Prerequisites

Step by Step Instructions

Reset via Password Recovery in DMSS

1. Input the camera’s IP address into a web browser.
Click on Forgot password?

2. Click on OK to agree to use your email address in this process

3. If you setup a recovery email you will be brought to a page with a QR code on it. (If you didn’t setup a recovery email, skip to “Reset via Physical Button” at the bottom of this page.)

4. Open the DMSS app on a mobile device.
Tap on Me at the bottom.
Then select Tool Manager

5. Tap on Device Password Management

6. Use the mobile device’s camera to scan the QR code from Step 3 above

7. Once the QR Code has been successfully scanned you will see the following message

8. Check the email inbox for the email address that was registered for password recovery on this device.
Input the security code from that email in the Security code field.
Then click on Next

9. Enter a new password in the New Password and Confirm Password fields.
Then click on OK

10. The password will be successfully reset

Reset via Physical Button

Depending on the model of your IP Camera, there could be a physical reset button on the outside body of the camera, or inside the camera body.

1. Reset: Press the reset button for 10-20 seconds while the camera is connected to power.

IP Camera Basic Info

Important Safeguards and Warnings

1．Electrical safety All installation and operation here should conform to your local electrical safety codes. The product must be grounded to reduce the risk of electric shock. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation.

2．Transportation security Heavy stress, violent vibration or water splash are not allowed during transportation, storage and installation.

3．Installation

4．Qualified engineers needed All the examination and repair work should be done by the qualified service engineers. We are not liable for any problems caused by unauthorized modifications or attempted repair.

5．Environment The NVR should be installed in a cool, dry place away from direct sunlight, inflammable, explosive substances and etc. This series product shall be transported, storage and used in the specified environments.

6. Accessories Be sure to use all the accessories recommended by manufacturer. Before installation, please open the package and check all the components are included. Contact your local retailer ASAP if something is broken in your package.

7. Lithium battery Improper battery use may result in fire, explosion, or personal injury! When replace the battery, please make sure you are using the same model! Before your operation please read the following instructions carefully.

Hardware Installation and Connection

Note: All the installation and operations here should conform to your local electric safety rules.

1. Check Unpacked NVR When you receive the NVR from the forwarding agent, please check whether there is any visible damage. The protective materials used for the package of the NVR can protect most accidental clashes during transportation. Then you can open the box to check the accessories. Please check the items in accordance with the list (Remote control is optional). Finally you can remove the protective film of the NVR.

2. About Front Panel and Rear Panel For detailed information of the function keys in the front panel and the ports in the rear panel, please refer to the User’s Manual included in the resource CD. The model label in the front panel is very important; please check according to your purchase order. The label in the rear panel is very important too. Usually we need you to represent the serial number when we provide the service after sales.

3. After Remove the Chassis Please check the data cable, power cable, COM cable and main boar cable connection is secure or not.

4. Important：Please turn off the power before you replace the HDD. You can refer to the User’s Manual for recommended HDD brand. Please use HDD of 7200rpm or higher. Usually we do not recommend a PC HDD. For detailed operation instruction, please refer to the User’s Manual included in the resources CD.

1. Use the screwdriver to loose the screws of the rear panel and then remove the front cover.

2. Put the HDD to the HDD bracket in the chassis and then line up the four screws to the four holes in the HDD. Use the screwdriver to fix the screws firmly to secure HDD on the HDD bracket

3. Connect to the HDD data cable to the main board and the HDD port respectively. Loosen the power cable of the chassis and connect another end of the power cable to the HDD port.

4. After connect the cable, put the front cover back to the device and then fix screws of the rear panel.

<p>The post Dahua IP Camera 5.0 UI Setup first appeared on NVR IPCAMERA SECURITY.</p>

.

Are the Cync Indoor and Outdoor Cameras wire-free?

The indoor camera uses a USB power adapter that must be plugged into an outlet, so it’s always on and ready to detect what’s happening. It uses Wi-Fi to connect to the cloud and enable live-streaming, real-time alerts, and clip recording.

The outdoor camera has two versions, a battery-powered outdoor camera and a wired outdoor camera. The wired outdoor camera must be plugged into an outlet. The battery-powered outdoor camera requires it’s battery to be charged.

What is the length of the electrical cord? 

How does the camera save user videos?

Data privacy is extremely important to us. We are giving our users two options based on their personal preferences. You can use a microSD card (sold separately) which allows you to store video locally on the camera and retrieve it securely via the Cync app. Alternatively, the Cam Cync subscription allows video to be backed up and accessed from anywhere via secure cloud storage. For an extra layer of security, two-factor authentication is always required when using the Cync app to view live streams or stored clips.

Does the camera require a subscription or a monthly fee? 

No. Users without a Cam Cync subscription can still view live video, use two-way talk, filter alerts by sound, motion, or people detection, and other great features. Adding a Cam Cync subscription or an optional microSD card for local storage (sold separately) enables clip recording so you never miss a moment.

Can I buy one subscription for multiple cameras, or do I need a subscription for each Cync camera? 

Each camera requires its own subscription at this time.

Cync Smart Cameras User Guide

Read More : 4K Smart Deterrence IP Camera Installation Guide

Do the Cync Indoor and Outdoor Cameras work with voice assistants? 

The cameras work with Alexa and Google. First, pair the camera to the Cync app. Then, enable Alexa or Google through the Alexa or Google Home apps.

Can I view the livestream through the Alexa app and its voice assistant? 

You can view your camera’s livestream through the Alexa app and the Alexa voice assistants that have a screen, like the Alexa Show. You can also enable two-way talk via compatible Alexa devices.

Can the camera be used at night? 

Yes, our camera has automatic night vision included so you can capture videos at nighttime. Note that placing the camera looking through a window will cause issues when using night vision. If using the camera in this way, we suggest turning off the night vision feature in settings.

Why is there a light ring halo when using night vision? 

This happens when you don’t remove the protective cover on the front camera shutter. Remove this cover and the light ring halo will go away.  

Does the camera record and send notifications when motion is detected? 

Yes, when motion is detected the camera will begin recording and send a notification to Cync users who share access to the camera within the Cync app.

Will the camera only notify me if a person is detected, or does it notify me for all motion activity?

You can choose to be notified of sound and/or motion events. You can additionally enable person detection, which filters motion alerts so that they are only triggered when a person is detected (as opposed to a tree branch moving or a dog walking in front of the camera).

Can I view multiple live feeds at the same time? 

Yes! On the home screen of your Cync app, you can see live preview videos of multiple cameras at once.

Who can view my camera feeds? 

Only the Admin can view the camera live feeds. Guests are unable to view or access cameras.

Can I use the Cync Cameras without Wi-Fi? 

No, a 2.4GHz Wi-Fi network connected to the internet is required to use the camera. Note that very slow internet speeds will likely impact the functionality of the camera, such as issues loading live streams or recording clips with the Cam Cync subscription.

Can I manually record video or take pictures?

Yes, there are buttons to both take a screenshot as well as record a video when viewing the live stream. These images and videos are stored to your phone’s camera roll.

.

Will my Indoor or Outdoor Camera continue to record locally from my SD Card after losing Wi-Fi?

As long as your device was commissioned prior to losing WiFi connection, your camera will continue to record clips locally to the SD card.

.

Why can’t I view my Cync camera’s live feed in the Google Home application?

In order to view live feed from your Cync Camera on the Home app, Google requires a Chromecast or Smart Display to access the camera’s feed.

.

.

Indoor Camera FAQs

Can I use this camera outdoors? 

No, the Cync Indoor Camera is rated for indoor use only. 

Can I control the privacy shutter from my phone? 

The physical privacy shutter on the camera can only be controlled from the physical camera. However, you can enable and disable privacy mode from the Cync app when the physical privacy shutter is not pushed up and blocking the camera lens.

Can the Cync Indoor Camera be placed facing out a window to capture outside activity? 

Yes, but automatic night vision will cause image distortion when the camera is facing out of a window due to reflection. If placing the camera in this way, we suggest turning off night vision in settings.

Can I mount the camera on a ceiling? 

Yes! You can mount the camera on a ceiling, and you can enable a 180-degree image flip in the settings menu to show the image right-side up in the app.

.

.

Outdoor Camera FAQs

What is the Wi-Fi range for this Outdoor Camera? 

Keep the camera in a strong Wi-Fi signal strength. Check your Wi-Fi signal strength at the camera’s location. You can do this by looking at the Wi-Fi signal strength on your phone. 1 or 2 bars indicates that the signal may not be strong enough for the camera to connect, or remain connected consistently.

What is the maximum and minimum temperature the plug can be in? 

Operating temp: -20 ~ 50C

Storage temp： -20~70C

Can I plug it into an outdoor extension cord? 

The Outdoor Wired Camera comes with a 24ft wire, but an outdoor extension cord can be used.

How long does the battery on the Outdoor Battery Camera last? 

Battery Life is estimated to last about 90 days per charge under normal circumstances. Number of detections, live streaming, Wi-Fi strength and connectivity as well as temperature can impact the battery life. To conserve your battery life, review the information below:

.

Ways to Save Battery Life

Cync battery camera is designed to go months for full charge. However, the real battery life is dependent on camera settings, app settings, and the user’s home environment. For issues with battery performance, check for the following factors.

Recording Duration

The default Recording Duration is 30s. You can reduce the value to save battery life.

Detection Settings

The more events captured/recorded by your battery camera, the more battery is used. To prevent excessive activity, you can:

What to do:

Wi-Fi Connectivity

Poor Wi-Fi connection will cause the battery to drain too fast.

Symptoms of Poor Wi-Fi Connection:

What to do:

Avoid Cold Weather

Cold weather can reduce battery performance as well. The Cync outdoor battery camera use Lithium-ion batteries.

Cold weather has a big impact on battery performance.

What to do:

Installing Outdoor Cameras

The Cync Outdoor Camera can be mounted to wall and adjusted for the best view. Proper steps for mounting depend on the outdoor camera type.

Quickly navigate to a specific section by selecting a link below.

Outdoor Wired Camera Mounting
Outdoor Battery Camera Mounting
 

IMPORTANT: Set the Outdoor Camera up in the Cync app before installation.

.

.

Outdoor Wired Camera Mounting

As the Outdoor Wired Camera will be mounted roughly 7-8ft off of the ground, the camera should be plugged in inside and setup in the Cync app then moved to its permanent outside location.

Install Mounting Bracket

1.After completing setup in the Cync app, choose your mounting location. Use the Cync app’s Wi-Fi signal strength indicator to ensure you’re within Wi-Fi range.

2.Hold mounting bracket in position and mark the hole locations with a pencil.

3.Drill holes with 1/8″ drill bit.

4.Insert screws and mount to wall or soffit, being sure that the arrow on the mount is facing up as shown below.

Attach the Camera to the Mounted Base

5.Identify the two notches at the bottom of the mounting plate.

6.Route the cord through the notches so that the cord going to the outlet is flush with the wall.

7.Align the red notch on the base of your camera with the red notch on the mounting plate.

8.Slide the camera base onto the mounting plate until it clicks into place.

Plug in Camera and Finish Setup

.

.

Outdoor Battery Powered Camera Mounting

Before installation and app setup, assure your camera’s battery is fully charged.

Install Mounting Bracket

1.After completing setup in the Cync app, choose your mounting location. Use the Cync app’s Wi-Fi signal strength indicator to ensure you’re within Wi-Fi range.

2.Hold mounting bracket in position and mark the hole locations with a pencil.

3.Drill holes with 1/8″ drill bit.

4.Insert screws and mount to wall or soffit, being sure that the arrow on the mount is facing up as shown below.

Attach the Camera and Adjust the Position

5.Align the red notch on the base of your camera with the red notch on the mounting plate.

6.Slide the base of the camera onto the mounting plate.

7.Turn the camera base counterclockwise to loosen the ball joint.

8.Adjust the camera to your desired angle (use the camera view in the Cync app to verify your view before locking the ball joint).

9.Turn the neck of the camera clockwise to tighten the ball joint and lock your camera in place.

Recharging and Replacing the Battery

• Recharging

1.Gently pull the camera to detach the magnet from the mounting bracket.

2.Insert one end of the charging cord into the USB port on bottom of the battery. Plug the opposite end of the charging cord into an outlet.

3.For faster charging, remove the battery from the camera and insert the charging cord directly into the battery and an outlet.
NOTE: A full recharge will take an estimated 6 – 8 hours. Charging the battery inside of the camera housing may take longer. The battery LED will change from red to green when charging is complete.

• Battery Replacement

1.Gently pull off the camera to detach the magnet from the mounting bracket.

2.Squeeze the buttons on both side of the camera to release the camera face.

3.Slide up the battery pack to remove it from the camera.

4.Insert one end of the charging cord into the USB port on bottom of the battery. Plug the opposite end of the charging cord into an outlet.

• Wired Cameras Only

◦ Plug the camera into a covered outlet and secure the power cord tightly to avoid water penetration.

◦ Mount within 24′ of an outlet.

.

Helpful Hints

Setting Up Outdoor Cameras

How to Set Up your Cync Outdoor Camera in the Cync App

.

Connecting Outdoor Cameras to the Cync app

Review, save and share clips with Cam Cync, and/or to a microSD card (sold separately).

Helpful Hints

.

Ways To Save Battery Life

The Cync Battery Outdoor Camera is designed to last several months on a full charge. However, camera settings, app settings, and the user’s home environment can all affect the battery’s life. For tips on improving battery performance, see the factors below.

.

.

Troubleshooting Tips

Unable to scan the QR code in Cync app

The Cync App is Unable to Locate My Wi-Fi Network

The Cync App is Unable to Connect to My Wi-Fi Network

Unable to connect to Outdoor Camera Live Stream

Note: Live streams will not appear on the Cync app until you select the video.

Videos are not recording

Note: Recorded clips can only be viewed via the Cync app. You will not be able to view clips saved onto the SD card on other devices.

Video stream is inverted

Camera recordings are not capturing audio

Factory Reset Indoor Camera 

Factory Reset Outdoor Camera 

Controlling Indoor Cameras

You can control your Cync Indoor Camera with the Cync app to monitor your home with ease.

.

Cync Indoor Camera Controls and Buttons

Indoor Camera

Indoor Camera Privacy Shutter

Slide the Privacy Shutter up to turn on privacy mode. This will disable the camera and no longer record video or audio. Slide the Privacy Shutter back down to enable video and audio again.

.

How to Control Indoor Cameras with the Cync app

When you’ve accessed the Indoor Camera screen you will have options to control the camera.

.

.

Troubleshooting Tips

Unable to scan the QR code in Cync app

The Cync App is Unable to Locate My Wi-Fi Network

The Cync App is Unable to Connect to My Wi-Fi Network

Unable to connect to Indoor Camera Live Stream

Videos are not recording

Note: Recorded clips can only be viewed via the Cync app. You will not be able to view clips saved onto the SD card on other devices.

Video stream is inverted

Camera recordings are not capturing audio

Accessing and Sharing Camera Video Clips

Learn how to access your camera’s video clips from a local Micro SD card or your Cam Cync cloud subscription to share with others.

.

.

Saving Video Clips

You can view and access your video clips by saving them on an SD card or through a Cloud Subscription.

.

Cloud Subscriptions

A Cync Cloud Subscription is a paid service to view and store your video clips. For more information, visit Cloud Subscriptions.

.

Micro SD Cards

A Micro SD Card is required to view and store video clips if there is no active Cloud Subscription.

.

Accessing Video Clips

The location of your stored video clips may vary based on the type of storage the camera has. Review the locations below to learn how to access your video clips.

.

Active Cam Cync Subscription or SD Card

.

Inactive Cam Cync Subscription and No SD Card

Clips cannot be accessed without an active storage method. If you wish to purchase a Cam Cync Subscription for cloud storage, follow the link provided to learn more.

.

Downloading and Sharing Video Clips (Cloud Subscription Only)

Downloading and sharing video clips vary between the operating system your phone has. This feature is only available if you are using the Cloud Subscription service. Locate your phone’s operating system below to learn how to download and share your video clips.

.

Downloading and Sharing on iOS

.

Downloading and Sharing on Android

.

Camera Subscriptions

Easily and securely store clips from your Cync Camera to the cloud with a Cam Cync subscription.

.

..

Free 30-Day Trial

Immediately after setting up your Indoor Camera, you will receive a free 30-day trial of backup video storage on Cam Cync. The free trial includes: 

NOTE: If you don’t subscribe before the 30-day trial period ends, you’ll no longer automatically record new clips and you’ll lose access to previously recorded footage after 14 days.

.

Subscriptions

After your 30-day trial you have the option to sign up for a monthly or annual Cam Cync subscription.

.

How to Subscribe

.

Cancelling a Subscription

You can cancel a subscription at any time, which will stop your next automatic renewal from occurring. You can cancel your subscription in the Cync Web Portal. After cancelling your subscription, your service will remain active until the end of your currently paid period (the end of your monthly or annual term). At the end of that period, your subscription will end and video will no longer be recorded to the cloud. Your clips will remain viewable for the normal 14-day storage period.

.

.

.

Troubleshooting

What should I do if I can’t log into the Web Portal?

My payment method is failing. What should I do?

Installing Indoor Cameras

Easily install the Cync Indoor Camera on a flat surface or mounted to a wall.

..

Setting Indoor Camera on Flat Surface

If you are setting the camera on a shelf, or flat surface, remove the mounting bracket at the base of the camera.

.

Mounting Indoor Camera to Wall

If you are mounting your Indoor Camera to a wall, follow the steps below.

.

Helpful Hints

.

<p>The post Cync Smart Cameras User Guide first appeared on NVR IPCAMERA SECURITY.</p>

Part 1: How do I install a Hard Drive in a Hikvision NVR?

Any setup with an NVR will need a hard drive to function as it is what all your footage is saved to. The WD Purple Drive is our go-to recommendation for the vast majority of IP setups as it designed with the high workload requirements of 24/7 surveillance solutions in mind. Please see the guide on picking the right HDD to better understand your storage needs and why we don’t recommend using HDD’s that aren’t optimised for use in a CCTV system.

Please see the five simple steps below for getting your hard drive installed into your NVR:
.

.

Step 1:
.

Firstly, you’ll need to locate and remove the screws that secure the NVR’s casing to the base so that you can access the inside of it. Typically, you’ll find two of these screws on the back of the unit and, depending on the NVR model, more on the sides – Do not lose these screws!​

.

.

Step 2:
.

Once inside, your NVR will look something like this. The parts in here you’ll need to identify are the:​

.

.

Now look at your HDD – fewer things to identify here:​

Step 3:
.

Get your hard drive and NVR connected – You can screw the drive into its bay in NVR first if you wish, but it’s normally easier to wire everything up first. Plug one end of the SATA interface cable into the HDD and the other into the corresponding port on the motherboard, then do the same with the SATA power cable. If the power cable has come already connected to the motherboard, then just plug the other end into the HDD’s SATA power port.​

.

.

Step 4:
.

You now just need to screw the HDD into the bottom of the NVR via the screw holes located in the HDD and corresponding holes in the HDD bay (insert the screws from underneath the NVR into the HDD inside – it can be a bit fiddly).​

.

Step 5:
.

Finally, screw the NVR’s casing back onto the base. Your HDD is now installed and ready to be formatted during the initial NVR setup, which is explained in Part 2.​

How do I set up my Hikvision IP CCTV System

Read More : Hikvision How To Tutorials Chapter 1

Part 2: How do I complete the basic setup of my Hikvision NVR?

You now need to configure the NVR so that it’s ready to connect to your network. Don’t worry – this is simpler than it sounds. This initial setup is simplest when done on the local GUI, using a directly connected monitor. The following steps walk you through this initial setup process:

Note – Avoid plugging anything into the back of the NVR until instructed to do so in this tutorial.

Firstly, you’ll need to look at the back of your NVR and make sure you can identify the following parts that are needed for this stage:
.

[1] – PoE (Power over Ethernet) ports (Most Hikvision NVRs have PoE ports which will power any camera via the network cable. Those that do not will require you to connect the camera across remotely, using a separate PoE injector or switch for power.)
​

[2] – VGA display port
​

[3] – HDMI display port
​

[4] – USB port(s) (and mouse – one should come included with the NVR)
​

[5] – LAN port (and ethernet cable – Cat5e or Cat6 is fine)
​

[6] – Kettle power socket (the power lead is included with the NVR)​

Now, follow these steps. It is easier if you leave your cameras disconnected until prompted later in this guide:

Step 1:
.

Plug the kettle plug into the power inlet to connect the NVR to a power supply.​

​

​

.

​

Step 2:
.

Connect your NVR to a display (this can be any monitor or television) by connecting either an HDMI or VGA cable from the monitor to the corresponding port in the back of the NVR.​

​

.

​

Step 3:
.

Plug your USB mouse into one of the NVR’s USB ports.​

​

​

Step 4:
.

Use an ethernet cable to connect your NVR to your local network – Plug one end of the cable into the RJ45 ports into a network access point (such as an ethernet port on your router), and the other into the LAN port in the back of your NVR.​

​

​

.

​

Step 5:
.

Turn the NVR on and let it boot up. Ignore the beeping noise, it’s completely normal and just the NVR telling you that it isn’t properly configured yet.​

​

You may get a prompt to adjust the NVR’s resolution to match the connected display, click “yes” to view everything in the best resolution supported by your display.​

​

​

​

Step 6:

​

Set your language when prompted.​

​

​

​

Step 7:
.

Set a password for the NVR , as well as a “Channel Default Password”, which will be passed onto any inactive device that is directly connected to the NVR’s PoE ports. We recommend keeping these passwords the same for simplicity’s sake. It’s key that you set a password that the NVR defines as strong and that you remember this password, as resetting the passwords on Hikvision devices can be a hassle that you want to avoid, if possible.​

​

Note – If you have lost your password then please see our guide on How to Reset the Password of your Hikvision Camera/NVR in 5 steps using the SADP Tool​

​

​

​

Step 8:
.

Now set a valid “reserved email” address for the NVR, which Hikvision will use for verification if you need to reset your password.​

​

Step 9:
.

Next, set an unlock pattern of your choice by using your mouse to draw any shape you like – you will be asked to do this twice to confirm the pattern. This will be used to quickly login to your NVR in the local GUI.​

​

​

Step 10:
.

Now, set your time zone, your preferred date format, and date/time.​

​

​

Step 11:

​

On the Network Setup page:​

​

Leave the “NIC Type” as it is.​

​

Either leave the “Enable Obtain DNS Server” box ticked, or untick it and use one these recommended public DNS servers.​

​

It is best to leave the “Enable DHCP” box unticked here. Instead, set the “IPv4 Address” of the NVR to an unused IP address on your network, which is within your gateway’s range. Your Gateway will typically be the IP address of your router. E.g. if your router’s IP address is “192.168.1.1”, you’ll want to give the NVR an IP address within the range of “192.168.1.x”, where “x” is any unused address between “2” and “254”.​

​

Note – DHCP can be left on during this stage of the setup to automatically assign your NVR an open IP address if you like, just be sure to turn it off again once your system up and running. To disable it again once set up, just go to: ​

System/Configuration→ Network → TCP/IP → DHCP Off → Apply​

​

Input the Subnet Mask of your network (typically it’s “255.255.255.0”) and “IPv4 Default Gateway”. If you’re unsure of these, see the below articles which explain how to check what they are and if a particular IP address is available:​

​

How-to: How do I find my router and PC’s IP address using a Windows PC?​

How-to: How do I find my router and Mac’s IP address using a Mac?​

​

The “Internal NIC IPv4 Address” can be left as it is, this just refers to the NVR’s own LAN address (so Plug and Play cameras will use IP addresses on this range).​

​

​

​

Step 12:
.

You can now stop the annoying bleeping! Select your hard drive(s) from the list and click “Init” to format it, and then “Next” when the formatting has completed.​

​

Note – This will completely wipe the drive, so please make sure that any that are being reused to not have data that you might need on them. ​

​

Step 13:

​

The next page is for the Camera Setup. As mentioned earlier, we recommend connecting any cameras after the NVR setup process has completed, so you can skip this page.​

​

Note – Please see part 4 for the instructions for adding cameras to your NVR after the initial setup. ​

​

Step 14:
.

You will now be taken to the platform access page. Again, skip through and leave this for now.​

.

Note – Please see part 12 for adding the NVR to the Hik-Connect app, which revisits this page. ​

​

​

Step 15:
.

Finally, you’ll be taken to the Change Password page and given the option to set a new admin password. Ignore this, unless you actually want to change your password. Remember, your admin password is different from your activation password, which you’ll need to use when activating individual cameras on your network.​

​

Click “Exit” and “Yes” on the “Exit Wizard” popup.​

​

​

.

That’s the initial setup of your NVR complete. You should now be taken to the NVR’s live view page (you won’t see your cameras until these are connected in Part 4), with your main navigation menu at the top of the screen.​

​

Check out the other pages for more!

.

<p>The post How do I set up my Hikvision IP CCTV System first appeared on NVR IPCAMERA SECURITY.</p>

3

.

See User for more information.

If you forgot your password, click Forgot Password in the login page, then follow the on-screen instructions to reset your password.

Alibi Vigilant IP Camera

2

Live View

3

To disable pixel calculation, click

.

3

To exit, click

5. Complete the action settings.

12

.

Click OK.

In a scan patrol route, the camera rotates from the start preset to the end preset in a specified gradient and direction.

13

.

NOTE!

This function is only available on certain models.

On the home page, click Playback.

18

.

Basic

MTU  |15OO

Port Type

Operating Mode  | Auto-negotiation

Click Save.

Click Save.

27

.

Port Mapping

Mapping Type

HTTP Port

RTSP Port

HTTPS Port

Save

Click Save.

6. 802.1x

Go to Setup > Network > Basic Config > 802.1x.

Enable 802.1x.

Choose a protocol type.

• EAP-MD5