For version : 3.0.3.0 if it doesn’t notice the password is incorrect , pls make sure you used the wired mouse, due to 3.0.3.0 version doesn’t support wireless mouse.

Note:User name and password should not exceed 8 characters and should not contain such as &*! @ (… #% and other special characters

You can refer to our YouTube channel videos : https://youtu.be/KJpJnYFlGK8

1) Within the black area, Click the left mouse button>right mouse button>left click>right click… Lasts 6 times

 

2) Yes

 

3) Input your new password,The old password is empty,you don’t need enter anything.

HiSeeu Wireless Camera System installation guide

Read Next : Hisilicon IP Camera Firmware Update

 

4) OK

 

 5) If this step still not work, please email Johnny@hiseeu.com with below screenshot of your NVR, then they will send you the super password to login

 

How to solve the problem of camera connect failed?

Please follow these steps to troubleshoot

Please check if the white antenna on the camera is loose first.

1)Cover the sensor under lens on the camera to see if the light is lit or not.

If it’s bright, it means camera is not bad.

If it’s not lit,You can connect the power of a good camera to the bad camera.

 

In the case of determining that camera is not broken.

2）right-click the mouse> video manage> Refresh / Search

3) if your camera with reset button, no LAN port, please take camera close to your NVR

1. delete the connect failed channel

2. press the reset button on camera for 10 seconds

3.Right click the mouse again > wireless add > wait the screen show a new camera IP address 172.20.14.**

4. if no IP address, pls reset camera for several times,

After adding the camera successfully, you can exit the add camera interface

below is the video for you check :https://youtu.be/Kaxvth-sd-Y

4) if your camera with Lan port

Pls use an Ethernet cable connect the camera to your NVR.

Delete the connect failed Channel>Refresh(Search) find IP address 192.168.**.**>Match Code(wait for IP address change to 172.20.14.**)

After that you can unplug the Ethernet cable.

You can refer to this youtube video.

https://youtu.be/kmNnFgjLiPI

HDD not fund / Not record anything

 Please refer to these below to solve the HDD not fund issue.

1）Check the power adapter connected to the NVR box. The NVR box uses 12V 2A or 12V 3A power supply. If you connect the 12V 1A cameras’ power supply to the NVR, the NVR box will not provide enough power to drive the hard drive.

2) If hard drive is preinstalled, there are 4 screws at the bottom of NVR box.

3）Check Hard Drive Information on NVR box and Format it

Right click the mouse>system setup>General setup>HDD setup>select the hard disk>Click Format, if the progress bar always shows a few percent or the formatting is failed, please contact with us.

 

 

4) Please open the NVR with a screwdriver, check the two cables connecting the hard drive and see if they are loose.

 

5）Take the hard disk out and install it on your computer. Check if the computer can recognize the hard disk. This is to confrim the HDD is the problem or not.

How to solve Gateway Unreachable or Network Error

If you click “fast network” to appear: Gateway Unreachable or Network Error , pls fellow below steps:

Step 1:

1) you must check if the network line is faulty or not: check whether the switch and router line connection are correct.

2) Can you connect to the external network normally through the computer wired connection?

Notice: Do not directly connect the recorder to the fiber

 

Step 2: Right click mouse and choose Fast Network —-> Auto config ,check if the network will be healthy or not

 

Step 3: If the auto config still can’t make it work , pls kindly check the same network computer network setting

Then “manual configuration” set the recorder network settings, don’t choose DHCP, input the same IP address and gateway and submask same as your computer

Offline

1)Pls Connect NVR to your router with an Ethernet cable. After that right click the mouse > Fast network.

 

2)If Step 1 doesn’t work, Maybe the Ethernet cable is damaged. Please replace it with a new one

3)If there is no problem with the cable.

Pls right click the mouse> system setup >Network setup>Do not choose DHCP>Change DNS to 114.114.114.114 or 8.8.8.8 > Power off the NVR and power on again(Reboot the NVR)

4)You can also connect the NVR to your home WiFi,

Enter the wireless internet interface > Select your home WiFi and enter your password > Apply

Change the display channel of the camera

When you select the corresponding channel, you can click the two buttons on the left, and then move the channel

You can also drag the image directly to another channel

How to set up Motion Detection？

1)Enable Motion Detectin on NVR Monitor

Pls right click the mouse>system setup>Channel Setup>Video detection>Selecting the Channel for Motion Detection>Choose the form of alarm>After you set it up you can Click “Copy to” to set to all channel

 

2) Set the area of motion detection to be set within the field of view of the camera.

 

3)App Alarm

a)Select App Alarm on NVR

b)Click three dot> Alarm push

 

c)Click System authority settings, turn on all permission of the app.

 

How can I view the camera remotely?

There are four methods to view the camera system remotely. Please refer to these step below.

 

1) First you need to connect the NVR with your router by wired or WiFi

Wired connection

1. wired connection, connect the NVR with router by ethernet cable

2. right click your NVR mouse choose fast network, then click auto config, check cloud ID status is online and network is healthy, then you can remotely check the system on your phone app

3. if not online and healthy network, please click manual configure, and check your router detail,

make sure the NVR and your router is the same IP gateway, IP address the first 3 number should be the same, the last one can’t be the same ,. preferred DNS please change to 8.8.8.8 and apply it

WiFi connection

1. please notes our NVR only can work with 2.4Ghz wifi network,

2. right click your NVR mouse choose system setup–network setup–wireless internet –enable wireless LAN, then find your house wifi name, input password, apply it

（please note the wifi name can not included any special character ,such as “_”, otherwise it will show connected failed.）

3. check the status is connect failed or success, if it is failed, please click view details,

check the same wifi network details on your phone and your NVR, then change them to the same IP gateway, IP address the first 3 number should be the same, the last one can’t be the same ,. preferred DNS please change to 8.8.8.8 and apply it

https://www.hiseeu.com/a/help/article/27632

2）To view on the Phone

a) Setup NVR box

Please reset your password：right click mouse>system setup>system admin>user>setuppassword>change a new password(Password must be within 8 characters)

b) Setup Mobile Phone

Scan below code download “Eseecloud”

 

 

c) Click “+”–“other way to add/scan the QR code on your NVR fast network page “–input cloud ID user name is admin and password is the one you login in NVR (If you doesn’t change the user name and password, User Name is admin password is the one you set for the NVR before), if your forget the password please refer this step: https://www.hiseeu.com/a/help/article/27650

(Cloud ID is in the lower right corner of the screen or right click your NVR mouse and choose fast network to find Cloud ID)

 

 

Scan the QR code on display

 

The user name is admin, enter the password of your camera system in the password field

 

3）To view via Eseecloud software on PC

EseeCloud for Windows PC

Eseecloud MAC: http://download.dvr163.com/tool/EseeCloud-mac-2.0.8_20200228.zip

Eseecloud Windows: http://download.dvr163.com/tool/eseecloud/EseeCloud_Setup_3.0.7.10.exe

here is the video to check how to add it : https://youtu.be/0AX1-sMKJG4

If you have registered your eseecloud account on your mobile phone, you can directly log in with your eseecloud account on the computer, and the account information will be automatically synchronized to the PC software

 

Double Click Cloud ID

 

How to remove the red triangle mark

For the red triangle mark it is for notice you something happened for your camera

such as the motion detection , video loss, HDD not found,

for remove the triangle

1. you need upgrade your NVR version to 3.0.5.0

there are 2 ways to upgrade

1) online upgrade, connect the NVR with router by LAN cable , right click your NVR mouse and choose system setup–system admin–system upgrade–online upgrade

2) offline upgrade, you need copy the firmware to the USB disk and choose local upgrade the firmware you cane email Johnny@hiseeu.com to get it

3) after you upgrade successfully, pls right click your NVR mouse and choose system setup–general setup–error setup–disable alarm icon.

Connect the camera to WiFi, then add it to NVR

You can connect the camera to your home wif and then add it to NVR.

First you need to press the reset button for 6s on the camera to reset the camera,

1) Please refer to pages 4 to 6 of the manual in the attachment to connect the camera directly to your mobile app,

 

 

 

 

２）First, you need to connect NVR to your router,

Then search the NVR for the camera connected to WiFi

Right Click the mouse > Video manage > Change the “protocol” to “onvif” > Search > Add one

 

if it show Password Error, please go to your phone app , click “…”–“Edit” then on blank place quickly click 6 time you will see cameras password here, go back to NVR video manage page, select the correct channel, click Manual Edit to input camera password .

What to do when the screen color is not displayed correctly

1） Click the mouse to select the screen –> click the 3rd icon (color adjust)

2) Click Default button–>select Ircut mode–>Ok

If it doesn’t solve your problem ,pls send this screenshot to us

Audio function！

1:Please check if there is a microphone hole on the back of the camera.

 

 

2:When you want to use the audio function of the camera, you need to turn on the audio function of the camera:(left click your mouse on the camera images)

3: right click your mouse — turn up the volume

4: Also turn on the audio button on App

 

 

if your version is 3.0 ,you should choose the AV stream also,refer these step

right-click the mouse ->System Setup->Channel Setup ->Encode Setup ->Select orresponding Channel(1-8) ->change the Encode Mode to AV Stream -> Apply

 

5: Every camera supports audio, but you can only use the audio of one camera at the same time.

and if the NVR your had order is with monitor, pls plug in your headphones or stereos behind the NVR

 

Why can’t remotely check the playback and change the setting

pls fellow below step

right click your mouse and choose system setup –system admin–user–edit user– choose remote and config and playback

How to solve the problem of camera lost connect with NVR, need reboot the camera to fix this problem?

Firmware 1: https://www.dropbox.com/s/qlyr53xfsrjscox/%E9%87%8D%E5%90%AF%E7%9B%B8%E6%9C%BA%E5%9B%BA%E4%BB%B6.rar?dl=0

 

IPCAKV3W_20220415_3_6_82_572011

IPCAKV3W_20220415_3_6_82_572011

(Fix the camera lost connection with NVR need unplug camera power cable)

Firmware 2: https://www.dropbox.com/s/mrdzs1ioqhmuuve/%E4%B9%9D%E5%AE%89%E5%8D%95%E6%9C%BA%E4%BF%A1%E5%8F%B7%E4%BC%98%E5%8C%96%E5%9B%BA%E4%BB%B6.rar?dl=0

 

IPCAKV3C_20220415_3_6_82_572010

IPCAKV3W_20220415_3_6_82_572011

(Fix camera signal problem)

 

572010 for the camera model: 5322-W

572011 for the camera model: 5323-W

please go to video manage page to confirm the camera model.

 

To upgrade the camera firmware: download the firmware from the dropbox, unzip the file at first, copy the correct file to your USB DISK root, format should be FAT32,go to system setup–channel setup—IPC upgrade page–click the correct channel–click start–remove mouse –insert USB disk–wait for camera upgrade successfully

I’ve connected everything, but the display doesn’t show images

Pls Refer to the following steps

1）Press the left mouse button for 30 seconds and the camera system will reboot.

2）A)You need use a VGA cable to connect the NVR to the monitor.

B)If you don’t have a VGA cable but have another monitor, you can connect the camera system to another monitor.

3）Then change the output resolution of NVR.(Right click the mouse>system setup>General setup>Screen setup>Output resolution)

Set an appropriate resolution and switch back to the original HDMI Cable.

4）If the display is still not displayed, you can choose another resolution.

if your NVR box version is 3.03.0 pls change the step 2 as below：

2) Then change the output resolution of NVR.(Right click the mouse>system setup>General setup>Display Resolution)

If camera often loses signal with NVR？

You can use the following four methods to solve the problem of poor camera signal

Please check if the white antenna on the camera is loose first.

1)First, you can change the wireless channel of the camera system to ‘other’, and the antenna of NVR is better to stand up

Right click > system setup > Network setup > change Wireless channel to “other” > Apply

Then restart the NVR, unplug the power supply of the NVR and plug it in again

2）You can replace the white antenna on the camera with the black extension antenna in the package, so that the black extension antenna passes through the wall.

 

Place the camera next to the NVR to ensure that there is a good signal between the camera and the NVR.

3）You can set a camera as a WiFi repeater to enhance the signal between the camera and the NVR.

4）You can also buy a WIFI repeater, which also enhances the signal between the camera and the NVR.

for Wifi repeater you can search: B07NRBYM5C on amazon.

If you can write a good rating to our camera system,We can send you one for no charge.

(warm notes:if your version is 3.0,there is “Search”button but not “refresh” ,click the “search” but the “refresh”)

(version 3.0)

How to use the wifi repeater to enhance signal

 

When the repeater is powered on, its indicator lights up.

Press the reset key for 10 seconds and it will deletes all previous matching records

How to use it on NVR.

1)Connect the repeater to NVR by Ethernet cable

2)click “Search” and then there will disappare a device which IP address is “192.xx.xx.xx”

Click it, it will pop up a new window

click Match button to let the status become “wireless has been matched”

 

At this point, you can unplug the Ethernet cable.

4) back to the Video Manage interface and click the Repeater .it will show the same window as the figure below.

click the add icon after the Router button,then select chanal which you want to enhance sigal

How to add an extra camera?

when you receive the new camera , there is no match between the nvr box and the new camera. You need to pair them.

if your camera with reset botton , no Ethernet port,

1)right click your NVR mouse and choose wireless add

2)press the camera reset botton for 10 seconds

3)wait it shows camera IP address 172.20.14.**

4)if no IP address, pls reset camera for several times, then you can exit,

below is the video for you check

https://youtu.be/Kaxvth-sd-Y

 

if your camera with Ethernet port, You can refer to our video on Youtube.

https://youtu.be/kmNnFgjLiPI

1) You need to connect the camera and the NVR box with the Ethernet cable.

2)Right-clik the mouse video manage→Refresh/search( find camera IP address as 192.168.1.**)→Match code( wait camera IP address changed to 172.20.14.**) then exit and choose add one

After camera and NVR are paired, you can unplug the Ethernet Cable.

3) Use the same way to pair more camera.

How to solve “Resolution too big”?

Our system upgraded , the “Resolution too big” camera is 3MP, old system can’t work with 3MP camera

1. right click your NVR mouse choose system admin–system version to check NVR version is 2.8 version or 3.0 version

2. if it is 3.0 version, you can upgrade it to latest firmware then it can support 3MP cameras (3.0.6.0 version and above version)

how to upgrade to NVR?

1) Online upgrade : go to system admin-system upgrade-then click online upgrade, wait for it upgrade successfully, then camera will show image

2) Offline upgrade, please email Johnny@hiseeu.com with your system version page , then she can provide firmware to you

3. if it is 2.8 version,the only way can fix is to upgrade camera firmware

right click your NVR mouse–system setup–system admin–IPC maintance, then take a screenshot of camera version, email : johnny@hiseeu.com for resolution too big problem.

4. after you get the firmware, please copy to your USB DISK root, format should be FAT32,go to IPC maintance page–click the correct channel–click start–remove mouse –insert USB disk–wait for camera upgrade successfully

5. go to system setup–channel setup–encode setup–find correct channel–change resolution from 2304*1296 to 1920*1080.

How to Change the Display Position of Channel

There are 2 ways to changed the position of camera

 

1)Generally speaking, we will choose four channels to display at the same time on the screen

 

For convenience, let’s first choose to have all channels displayed on the screen.

right click your mouse — Split Screen — X8 View

 

Now we want to let the Channel 7 to the Channel 2 position

left click the mouse on the channel 7 screen and dont loose

then move to the channel 2 position ,loose the mouse left key

 

that is OK

2)Please wrote down the IP address of the camera (which you want to exchange it channel,such as channel 5). Then deleted the channel which you want that camera to place(such as channel 2), did a manual edit on channel 2 ,Enable it and change or add the IP address of channel 5 wrote down. Camera immediately came up on channel 2.

App wrong Password

Pls refer to these step to solve the wrong password issue. refer this video : http://youtu.be/bFVwGqnr2Js

1)If you doesn’t change the User Name and the Password on NVR box.

The User name is ‘admin’, no password (you needn’t input anything)

 

 

 

2)For change the password on NVR box.

Right click the mouse>system setup> system admin>User>set password

 

3)User name and password should not exceed 8 characters and should not contain such as &*! @ (… #% and other special characters (you can setup password: jasmi985/ jasmi996/ jasmi856 or others. )

If you can login NVR with a password, but can’t login on App, please confirm that the password within 8 characters

Note：App login username and password are different from the camera login username and password. They are two different sets of username and password system.

How to set up Email notification?

a. Enable POP/IMAP in your email. If default setting of your E-mail enables that, please skip this step.

Login your email via browsers; go to Settings – Forwarding and POP/IMAP-Enable POP and IMAP – Save Changes.

 

We also need to Allow 2-Step Verification for your Gmail account, login www.google.com

 

• Open your Google Account.
• Select Security.
• Under “Signing in to Google,” select 2-Step Verification and then Get started.
• Follow the on-screen steps.
• Normally after you set 2-step verification, you will create a new password on NVR password page you need input this password

b. Go to your system main menu. System setting- Channel setting- Video Detection. Enable E-mail Notification and click Copy to apply the same setting to other channels.

 

b. Go to your system main menu. System setting- Network setting- Email setting. You will see the interface shown below.

 

c. Follow the instruction below to input the information required to finish the setting.

 

Email Notificaion: Check “Enable”

SMPT Provider: Click the one you use in the selection. Or click USER CUSTOMIZE to use the E-mail server that is not in the selection.

Sender : Type in your sender email address

Password: the password of login your sender emial address

SMTP service: when you choose the correct SMTP provider, it will suggest correct service to you

Port: The default port is 25. If it doesn’t work, you can go to the link below to get the port of the e-mail you use.

https://www.arclab.com/en/kb/e … .html

Encryption Type: Select the one that your E-mail server works. If there is no selection, please choose None.

Sendee 1: the email you want to receive email alerts

Sendee 2: the second email you want to receive email alerts, you can leave it blank

 

d. Then click Test see if you can receive a test e-mail alerts from Esee. If yes, that means the setting has set successfully. Then, please click Apply to save the setting.

e. Latest APP allow to set email notification on the cellphone directly

Go to cellphoen app Eseecloud, click me–settings–mail to receive alert messages–enable it, then put your gmail address, to get verfication code, after you input verfication code click confirm, then you will get the email notification, thanks

 

 

 

 

 

How to setup Record Plan?

You can set up three modes of record plan

Note：After you have set up the record plan, you need to click “copy to” to apply the record plan to all channels.

1) Time Recording:

Setup period of time of recording on NVR,Right Click the mouse>System Setup>Record Setup>Record Plan.

Click Time and put mouse icon on the upper left corner(for example 1 as picture shows).press and drag the mouse to the right to choose the time.the list will turn to red.

2) Motion Recording:

Only detect motion and then start recording. Right click mouse>System Setup>Record Setup>Record Plan.

Click Motion and putr mouse icon on the upper left corner, press and drag the mouse to the right to choose the time. The list will turn to green.

3) Alarm Recording:

Riht click the mouse>System setup>Record Setup>Record Plan.

Click Alarm and put mouse icon on the upper left corner,Press and drag the mouse to the choose the time,The list will turn to yellow.

Note: Users can Setup any period of time they want, for example 0:00:00-23:59:59, That’s 24hrs*7days recording. When NVR detects hard disk, the default setting will be 24hrs*7days recording.

The priority of Alarm is higher than that of Motion, and the priority of Motion is higher than that of Time.

When you have set the corresponding record mode, you can click “select all”, and the time area below will become the corresponding color

Video Playback

Right clik the mouse>Video Playback>Choose date、Channel、record mode>Click Search>then can view playback file

Note：You can only watch four Channels recording at the same time.

1. IIIustration for playback button:

play,

pause:

fast forward*2,*4,*8；

2. Play file: Choose the recording file in file list,as number“1”shown in picture. Chooseone of the recording, click“play”to play to recording file;

3. Video backup: Choose the recording file in file list,as number“1”shown inpicture.insert the U flash disk, click“video backup”to backup the file;

4. Timeline: Click“date”and“time”at left bottom to check the timeline of recording, as number“2”shown in picture;

5. On the timeline with recording file,left click the mouse, the can playbackthe file.

How to watch the playback on my phone?

First ,you should install the Eseecloud on your phone ，if you hadn’t installed it ,refer this link:

http://www.hiseeu.com/news/wirelessskitfaq/69.html

click playback

then it will show the interface follow below

choose the time and channel which you want to watch

Notes: The default is no sound when you watch playback.so you should click this sound button to open it if you want to hear

How to backup the recording

There are 2 ways to make backup

1) use USB disk to backup

1. right click your mouse, and choose video backup.

2. choose the channel/date/time playback you need backup,

(If you copy too much backup, we suggest you copy it one by one channel to save copy time)

3.Backup, the let your mouse out and within 30 seconds put the USB to get the backup

if you need check tbe playback you copy out on computer, pls use VLC player , you can download here :

http://download.dvr163.com/tool/Video-player%20.zip

 

pls notes USB disk format should be FAT32 otherwise your NVR may can’t find it.

 

2) make backup on computer

 

1. download Eseecloud :

Eseecloud MAC: http://download.dvr163.com/tool/EseeCloud-mac-2.0.8_20200228.zip

Eseecloud Windows: http://download.dvr163.com/tool/eseecloud/EseeCloud_Setup_3.0.7.10.exe

 

2. add the system to your Eseecloud phone account, then on computer software choose login cloud(login with the phone app Eseecloud account and password)

 

3. search the cameras playback, and choose the channel you want to make playback and wait for it shows the recording

 

4. click the download icon the chose the files you want to download, wait for it finished the process, then you can open the it and check the playback on computer

 

here is the video for you check : https://youtu.be/kR7QN_2UKdI

Factory Setting

Pls refer to these step below to reset system

1)Right click the mouse>System setup>System admin>factory setting

*Note: pls don’t check “Channel setup”&”Screen setup”&”Digital Channel”

Click “Apply”

2)If you Check “All”

After NVR Reboot,you need Right click again>video manage>Double-click the IP address of camera (like 172.20.14.2)

If Your NVR box version is 3.0.3.0

Pls refer to below steps

Right click the mouse>System setup>System admin>factory setting>simple restore

The standalone camera connection step

pls connect it step by step , if you fail , pls send us some screenshot and tell us which step is wrong by email or whatsApp

our email is :johnny@hiseeu.com

Wechat/WhatsApp:+86 13392810296

Skype:Johnny.chen1204

1) download “Eseecloud” app on your phone and register it

click add button and choose Standalone camera

 

2)check if the camera light lit

click this button

3) Point the camera of the mobile phone at the QR code of the camera

4）Choose a network environment for your camera, the WiFi name

5）input the wifi password and click the connecting device button

6) Wait a minute and it will connect succeed click COMPLETE button

7)edit the camera name and set its password(password can be empty )

that is finished! if you want change some camera information such as password, you can click setup button to set it

Here is video for you check how to connect it on phone app : https://youtu.be/tNKeWUfe-mI

How to fix there is no cloud ID

1. Connect the recorder to the same LAN as the computer ：connect to the router

2. Provide the IP address of the recorder, System Settings – Network Setup Photo

 

 

3. Recorder switching debugging mode: system setting – system management – system maintenance, right mouse click, pop-up dialog box, click the left mouse button in the blank space of this pop-up dialog box, right click, click the left and right button, 12 times, Find out if the font prompt toggles the debug version, click Yes, OK. Go back to the lower left corner of the main interface with a red font. Take a photo to us (2.8 version)

 4. Provide remote tool ID and password, manufacturer technology remote connection control and send the email to us

if you don’t have the remotely tool, you can send the email to us, so we can send to you

(3.0.3.0 version)

3.Recorder switching debugging mode: right click your mouse—system setup–general setup–time setup–change the Date format–right click your mouse, pop-up dialog box ,

click the left mouse button in the blank space of this pop-up dialog box, right click, click the left and right button, 12 times, Find out if the font prompt toggles the debug version, click Yes, OK. Go back to the lower left corner of the main interface with a red font. Take a photo to us.

How to contact amazon customer service?

1). Use your Amazon account to log into www.amazon.com

2).Pull down to the bottom of this page and find “Help” button , and click on it to get into a new page

3). Find “Need more help ” in the middle of this page and move it to this button and you will see “Contact Us ” and click on it .Then you will get in touch with Amazon Customer Service Associate.

4).Or you may choose to call the Customer-Service by number 866-216-1072

Add Device (412 camera system)

First you need to connect the camera system to your WiFi.

Click the home button.

 

 

Select your WiFi and enter wifi password

This string of numbers is cloud ID.

Then go to “Eseecloud” app

Networked devices

Input your cloud ID and User name(User name is admin) and password(Camera system has no password by default)

5MP WK-4HB315-1T TZ-HB315 Night Vision is not good,upgrade as below

Please download the firmware at this link :

https://www.dropbox.com/s/gcrg3xw7f42ylys/IPCAKV5C_20221011_3_6_97_572110hsy%281%29.rom?dl=0

After you get the firmware, please copy to your USB DISK root, format should be FAT32,

Pls right click your NVR mouse–System Setup–Channel Setup–IPC Upgrade–Select the correct channel–click start–remove mouse –insert USB disk–wait for camera upgrade successfully

How to solve Most of Network Status Problem?

Please right click NVR mouse choose Fast Network check Network Status

• Healthy network: Network connect successfully
• Gateway Unreachable: means NVR IP Gateway and IP address not in the same gateway as your router, Click Manual Config, then find your router correct IP gateway, such as 192.168.1.1, then IP address should be 192.168.1.***, last numbercan’t be the same as your router, change it on NVR. If you connect with wifi network, you need go to System Setup—Network Setup—Wireless Internet page click View Details and click Manually to change those information.
• Request DNS Error: disable DHCP, change the Preferred DNS to 8.8.8.8, reboot the NVR and router.
• Network Cable Disconnect: make sure the NVR connect with router by Ethernet cable
• Network Card Not Found: on Network Setup page find PPPoE disable it.
• Network Busy: disable DHCP, change the Preferred DNS to 8.8.8.8, reboot the NVR and router.

<p>The post HiSeeu Wireless Camera System installation guide first appeared on NVR IPCAMERA SECURITY.</p>

How to find camera’s firmware version?

Before embarking on updating or upgrading IP camera’s firmware, you need to get the right one that matches your camera’s firmware. To know your existing camera’s firmware version, you can logon camera’s web interface. Click “Version” on the right top bar, it will pop-up a new window displays camera’s version info, for example:

• Video In: 1
• Alarm In: 2
• Alarm Output: 1
• Audio In: 1
• Build Date:2016/4/27 10:41:27
• System: V4.02.R11.00002531.10010.230800.00000
• Serial ID: cfa65bfd4422fb65

IP Camera Firmware List – Part 1

IP Camera Firmware List Part 2

Please share this article to social media, so that you can access the rest part of download links of IP camera’s firmware.

IP Camera Firmware List – Part 3

IP Camera Firmware List – Part 4

How to update/upgrade camera’s firmware?

Once you got correct firmware for your camera, you’re able to update and upgrade your camera with two different ways. Method 1: you can logon camera’s web interface via web browser and go to “DeviceCfg” > “Advanced” > “Upgrade” , now you can select firmware file, then upgrade firmware remotely.

<p>The post V5.00.R02.V4.02.R12. FIRMWARE DOWNLOAD for IP CAMERA first appeared on NVR IPCAMERA SECURITY.</p>

The Hisilicon High-definition network camera has adopted embedded system and a number of advanced IT technologies,such as audio/video codec technology(h.264,h.265,h.264+,h.265+),and integrated code compression, two-way audio intercom, intelligent analysis , PTZ, lens control, alarm input and output, buffer storage and network transmission and other functions.

Hisilicon IP Camera

Resolution	Type	Firmware	Time	Download Url
1MP	Normal	3518EV200_OV9732_W_8.1.30.5	2020-06-04 13:48:46
1.3MP	Normal	3518EV200_IMX225_W_7.1.34.5	2020-06-04 13:49:26
		3518EV200_S3130_W_7.1.25.1	2020-06-04 13:49:05
2MP	Normal	3516EV200_IMX307_B1T0A1M0C0P1_W_20.1.33.1	2021-02-06 16:07:09
		3516EV200_F23_B1T0A1M0C0P1_W_20.1.33.1	2021-02-06 16:02:03
		3516CV500_IMX307_B1T0A1M0C0P1_W_20.1.28.2	2020-08-07 19:06:19
		3516CV500_IMX462_B1T0A1M0C0P1_W_20.1.29.2	2020-08-07 15:32:07
		3518EV200_IMX323_W_7.1.25.1	2020-06-04 14:13:38
		3516CV200_OV2718_W_7.1.26.4	2020-06-04 14:13:20
		3516CV300_IMX290_W_8.1.9.3	2020-06-04 14:13:02
		3516CV200_IMX323_W_7.1.25.2	2020-06-04 14:12:39
		3516D_IMX290_W_7.1.32.3	2020-06-04 14:08:48
		3516CV300_IMX323_W_8.1.9.3	2020-06-04 14:08:20
		3516CV300_IMX323_B1T0A1M0C1_W_9.1.5.2	2020-06-04 14:01:32
		3516CV300_IMX307_B1T0A1M0C1_W_9.1.5.1	2020-06-04 14:01:04
		3516CV300_IMX327_B1T0A1M0C1_W_9.1.9.5	2020-06-04 14:00:43
		3516EV100_F23_B1T0A1M0C1_W_9.1.12.2	2020-06-04 14:00:15
		3516CV300_IMX307_B1T0A1M0C1P1_W_20.1.3.2	2020-06-04 13:59:51
		3516CV300_IMX323_B1T0A1M0C1P1_W_9.1.1.6	2020-06-04 13:56:16
		3516CV300_IMX327_B1T0A1M0C1P1_W_20.1.2.3	2020-06-04 13:55:57
		3516EV100_F23_B1T0A1M0C1P1_W_9.1.1.6	2020-06-04 13:55:39
		3516EV200_SP2309_B1T0A1M0C0P1_W_9.1.26.2	2020-06-04 13:52:12
	SD	3516CV500_IMX462_B1T1A2M1C2P1_W_20.1.32.5	2021-02-06 16:09:31
		3516EV200_IMX307_B1T1A1M0C0P1_W_20.1.33.1	2021-02-06 16:07:35
		3516CV500_IMX307_B1T1A2M1C2P1_W_20.1.33.4	2021-02-06 16:02:50
		3516EV200_F23_B1T1A1M0C0P1_W_20.1.33.1	2021-02-06 16:01:26
		3516CV500_IMX307_B1T1A1M0C0P1_W_20.1.28.2	2020-08-07 19:04:42
		3516CV500_IMX462_B1T1A1M0C0P1_W_20.1.29.2	2020-08-07 15:31:19
		3516CV300_IMX323_TF_W_8.1.6.6	2020-06-04 14:24:33
		3516CV300_IMX290_TF_W_8.1.6.6	2020-06-04 14:24:10
		3516CV300_IMX323_B1T1A1M0C1_W_9.1.5.2	2020-06-04 14:23:51
		3516CV300_IMX323_B2T1A1M0C1_W_9.1.5.2	2020-06-04 14:23:32
		3516CV300_IMX307_B1T1A1M0C1_W_9.1.5.1	2020-06-04 14:23:15
		3516CV300_IMX307_B2T1A1M0C1_W_9.1.5.1	2020-06-04 14:22:58
		3516CV300_IMX327_B2T1A1M0C1_W_9.1.9.5	2020-06-04 14:22:09
		3516CV300_IMX327_B1T1A1M0C1_W_9.1.9.5	2020-06-04 14:21:51
		3516CV300_IMX307_B1T1A1M0C1P1_W_20.1.3.2	2020-06-04 14:21:17
		3516CV300_IMX307_B2T1A1M0C1P1_W_20.1.3.2	2020-06-04 14:20:56
		3516CV300_IMX323_B1T1A1M0C1P1_W_9.1.1.6	2020-06-04 14:20:33
		3516CV300_IMX323_B2T1A1M0C1P1_W_9.1.1.6	2020-06-04 14:20:08
		3516CV300_IMX327_B1T1A1M0C1P1_W_20.1.2.3	2020-06-04 14:16:38
		3516CV300_IMX327_B2T1A1M0C1P1_W_20.1.2.3	2020-06-04 14:16:17
		3516EV200_SP2309_B1T1A1M0C0P1_W_9.1.26.2	2020-06-04 14:15:56
	SL	3516CV300_IMX290_W_SL_8.1.15.3	2020-06-04 14:25:12
	MINI	3516CV500_IMX307_MINI_WIFI_BD_W_20.1.28.2	2020-08-07 19:04:03
		3516CV500_IMX307_MINI_BD_W_20.1.28.2	2020-08-07 16:06:01
		3516CV300_IMX290_MINI_W_7.1.48.2	2020-06-04 14:26:25
		3516D_IMX290_W_MINI_7.1.27.3	2020-06-04 14:26:07
		3516CV300_IMX307_MINI_BD_W_20.1.16.4	2020-06-04 14:25:51
	PTZ	3516EV200_IMX307_X10T1A1M0C0P1_W_20.1.33.3	2021-02-06 16:59:48
		3516CV500_IMX462_X10T1A1M0C0P1_W_20.1.33.4	2021-02-06 16:59:02
		3516CV500_IMX307_X10T1A1M0C0P2_W_20.1.25.4	2020-08-07 19:03:37
		3516CV500_IMX307_X10T1A1M0C0P1_W_20.1.28.2	2020-08-07 19:03:13
		3516CV300_IMX290_AF_5X_W_8.1.10.1	2020-06-04 14:35:52
		3516CV300_IMX323_AF_5X_W_8.1.9.3	2020-06-04 14:35:35
		3516CV300_IMX290_AF_5X485_W_7.1.36.4	2020-06-04 14:35:12
		3516CV300_IMX323_AF_5X485_W_7.1.37.2	2020-06-04 14:33:56
		3516CV300_IMX323_X10T0A1M0C1_W_9.1.8.2	2020-06-04 14:32:57
		3516CV300_IMX323_X10T1A1M0C1_W_9.1.8.2	2020-06-04 14:32:38
		3516CV300_IMX323_X11T1A1M0C1_W_9.1.8.2	2020-06-04 14:32:21
		3516CV300_IMX307_X10T0A1M0C1_W_9.1.7.1	2020-06-04 14:32:01
		3516CV300_IMX307_X10T1A1M0C1_W_W_9.1.7.1	2020-06-04 14:31:18
		3516CV300_IMX307_X11T1A1M0C1_W_9.1.7.1	2020-06-04 14:31:00
		3516CV300_IMX327_X10T0A1M0C1_W_9.1.11.1	2020-06-04 14:30:40
		3516CV300_IMX327_X10T1A1M0C1_W_9.1.11.1	2020-06-04 14:30:20
		3516CV300_IMX327_X11T1A1M0C1_W_9.1.11.1	2020-06-04 14:30:00
		3516CV300_IMX307_X10T0A1M0C1P1_W_20.1.3.2	2020-06-04 14:29:42
3516CV300_IMX307_X10T1A1M0C1P1_W_20.1.3.2		2020-06-04 14:29:22
3516CV300_IMX307_X11T1A1M0C1P1_W_20.1.3.2		2020-06-04 14:29:04
3516CV300_IMX323_X10T0A1M0C1P1_W_9.1.1.6		2020-06-04 14:28:44
3516CV300_IMX323_X10T1A1M0C1P1_W_9.1.1.6		2020-06-04 14:28:25
3516CV300_IMX323_X11T1A1M0C1P1_W_9.1.1.6		2020-06-04 14:28:05
3516CV300_IMX327_X10T0A1M0C1P1_W_20.1.2.3		2020-06-04 14:27:43
3516CV300_IMX327_X10T1A1M0C1P1_W_20.1.2.3		2020-06-04 14:27:28
3516CV300_IMX327_X11T1A1M0C1P1_W_20.1.2.3		2020-06-04 14:27:13
WIFI IPC_SD	3516CV300_IMX323_W_WIFIIPC_SD_8.1.5.5	2020-06-04 14:36:43
	3516CV300_IMX323_W1T1A1M0C1_W_9.1.8.2	2020-06-04 14:36:28
	3516CV300_IMX323_W1T1A1M0C1P1_W_20.1.16.4	2020-06-04 14:36:13
GUARD	3516CV300_IMX327_GUARD_BD_W_9.1.1.6	2020-06-04 14:37:06
AI	3516CV500_IMX307_AR_EM_AF_BD_W_21.1.3.5	2021-02-06 17:05:11
	3516CV500_IMX307_AR_EM_BASE_BD_W_20.1.52.2	2021-01-20 10:56:02
	3516CV500_IMX327_AR_EM_BASE_BD_W_21.1.2.6	2021-01-20 10:54:38
	3516CV500_IMX327_AD_BASE_BD_W_9.1.27.2	2020-06-04 14:40:21
	3516CV500_IMX327_AR_BASE_BD_W_9.1.27.5	2020-06-04 14:40:05
	3516CV500_IMX327_AR_AF_BD_W_9.1.34.4	2020-06-04 14:39:46
3MP	Normal	3516D_IMX123_W_8.1.10.3	2020-06-04 14:41:10
4MP	Normal	3516D_OV4689_W_7.1.35.4	2020-06-04 14:41:42
	SD	3516D_OV4689_W_SD_8.1.32.3	2020-06-04 14:42:29
		3516D_OV4689_W_SD_S_8.1.6.2	2020-06-04 14:42:10
	BOX	3516D_OV4689_W_BOX_7.1.49.3	2020-06-04 14:43:06
	PTZ	3516D_OV4689_5NEWPTZ_W_SD_8.1.24.1	2020-06-04 14:47:40
		3516D_OV4689_5NEWPTZ485_W_SD_8.1.15.2	2020-06-04 14:47:25
	WIFIIPC_SD	3516D_OV4689_W_WIFIIPC_SD_8.1.12.3	2020-06-04 14:48:04
	FISHEYE	3516D_IMX326_FISHEYE_MAX_W	2019-04-03 09:29:20
		3516D_IMX326_FISHEYE_BD_W	2019-01-09 10:52:17
		3516D_IMX326_FISHEYE_W	2017-10-20 16:50:24
	MINI	3516DV300_IMX335_MINI_WIFI_BD_W_20.1.33.6	2021-02-06 16:53:02
5MP	Normal	3516DV200_IMX335_B1T0A1M0C0P1_W_20.1.47.6	2021-02-06 16:04:48
		3516A_IMX178_W_8.1.11.6	2020-06-04 15:17:23
		3516D_OS05A10_B1T0A1M0C1_W_9.1.12.5	2020-06-04 15:17:06
		3516D_OS05A10_B1T0A1M0C1P1_W_9.1.53.1	2020-06-04 15:16:48
		3516D_IMX335_B1T0A1M0C1P1_W_9.1.52.2	2020-06-04 15:16:29
	SD	3516DV200_IMX335_B1T1A1M0C0P1_W_20.1.47.6	2021-02-06 16:05:08
		3516DV200_IMX335_B1T1A2M1C2P1_W_20.1.48.1	2021-02-06 16:03:56
		3516D_OS05A10_B1T1A1M0C1_W_9.1.12.5	2020-06-04 15:20:56
		3516D_OS05A10_B2T1A1M0C1_W_9.1.12.5	2020-06-04 15:19:46
		3516D_OS05A10_B1T1A1M0C1P1_W_9.1.53.1	2020-06-04 15:19:25
		3516D_OS05A10_B2T1A1M0C1P1_W_9.1.53.1	2020-06-04 15:18:44
		3516D_IMX335_B1T1A1M0C1P1_W_9.1.52.2	2020-06-04 15:17:53
	BOX	3516D_OS05A10_BOX_W_9.1.12.3	2020-06-04 15:21:40
		3516D_OS05A10_BOX_BD_W_9.1.1.6	2020-06-04 15:21:25
	PTZ	3516DV200_IMX335_X80T1A2M1C0P1_W_21.1.5.7	2021-02-22 14:30:06
		3516DV200_IMX335_X10T1A1M0C0P1_W_20.1.47.6	2021-02-06 16:55:14
		3516D_OS05A10_X10T0A1M0C1_W_9.1.12.5	2020-06-04 14:45:44
		3516D_OS05A10_X10T1A1M0C1_W_9.1.12.5	2020-06-04 14:45:22
		3516D_OS05A10_X11T1A1M0C1_W_9.1.12.5	2020-06-04 14:44:54
		3516D_OS05A10_X10T0A1M0C1P1_W_9.1.53.1	2020-06-04 14:44:40
		3516D_OS05A10_X10T1A1M0C1P1_W_9.1.53.1	2020-06-04 14:44:24
		3516D_OS05A10_X11T1A1M0C1P1_W_9.1.53.1	2020-06-04 14:44:02
		3516D_IMX335_X10T0A1M0C1P1_W_9.1.52.2	2020-06-04 14:43:45
		3516D_IMX335_X10T1A1M0C1P1_W_9.1.52.2	2020-06-04 14:43:30
	WIFIIPC_SD	3516D_OS05A10_W1T1A1M0C1_W_9.1.12.4	2020-06-04 15:23:01
		3516D_OS05A10_W2T1A1M0C1_W_9.1.12.4	2020-06-04 15:22:42
		3516D_OS05A10_W1T1A1M0C1P1_W_9.1.1.6	2020-06-04 15:22:26
		3516D_OS05A10_W2T1A1M0C1P1_W_9.1.1.6	2020-06-04 15:22:08
	AI	3516DV300_IMX335_AR_EM_BASE_BD_W_21.1.13.5	2021-04-12 11:04:03
		3516DV300_IMX335_AR_EM_AF_BD_W_21.1.11.2	2021-04-12 11:03:32
		3516DV300_IMX335_AR_BASE_BD_W_9.1.27.5	2020-06-04 15:15:17
		3516DV300_IMX335_AR_AF_BD_W_9.1.35.2	2020-06-04 15:15:03
6MP	SD	3516aV200_IMX326_W_8.1.2.2	2020-06-04 15:24:02
	PTZ	3516AV200_IMX326_AF4X_AUDIO_TF_W_8.1.13.1	2020-06-04 15:25:34
8MP	Normal	3516AV300_IMX415_B1T0A1M0C0P1_W_20.1.35.3	2021-02-06 15:54:48
		3516AV300_IMX415_B1T0A1M0C0P2_W_20.1.26.2	2020-08-07 18:55:00
	SD	3516AV200_OS08A10_B1T1A1M0C0P1_W_20.1.33.5	2021-02-06 15:56:08
		3516AV300_IMX415_B1T1A2M1C0P1_W_20.1.35.3	2021-02-06 15:55:20
		3516AV300_IMX415_B1T1A2M1C0P2_W_20.1.26.2	2020-08-07 18:55:52
		3519V100_IMX274_W_7.1.39.3	2020-06-04 15:26:35
		3516AV200_IMX274_W_9.1.16.3	2020-06-04 15:26:21
		3516AV200_IMX274_B1T1A1M0C0P1_W_20.1.13.3	2020-06-04 15:25:51
	PTZ	3516AV300_IMX415_X10T1A2M1C0P1_W_20.1.32.5	2021-02-06 19:18:15
		3516AV200_OS08A10_X70T1A2M1C1P1_W_20.1.35.3	2021-02-06 16:56:56
		3516AV200_IMX274_AF4X_AUDIO_TF_W_8.1.15.2	2020-06-04 15:27:21
	WIFIIPC_SD	3516AV200_OS08A10_W2T1A1M0C1P1_W_9.1.1.5	2020-06-04 15:27:44
	AI	3516AV300_IMX415_AR_EM_BD_W_21.1.12.4	2021-04-12 11:04:46
12MP	SD	3519V101_IMX226_B1T1A1M0C0P1_W_20.1.13.2	2020-06-04 15:28:08
	BOX	3519V101_IMX226_BOX_BD_W_9.1.1.6	2020-06-04 15:28:22
	PTZ	3519V101_IMX226_X70T1A2M1C1P1_W_20.1.13.2	2020-06-04 15:28:37
	FISHEYE	3519V101_IMX226_FISHEYE_W_9.1.16.1	2020-06-04 15:36:22
		3519V101_IMX226_FISHEYE_BD_W_9.1.46.3	2020-06-04 15:30:04

<p>The post Hisilicon IP Camera Firmware Update first appeared on NVR IPCAMERA SECURITY.</p>

For the DVR system. Please make sure the DVR is adjusted to Have IP channels.

1. Go to the Main Menu–>System–>Digital–>Channel Type to adjust the channel Type

When the operation is finished. the DVR system will reboot one time

Type 1 DVR system and Type 1 NVR system

2. Go to the Main Menu–>System–>Digital–>Channel to the IP camera adding page

Select the correct channel you want to add. enable the IP channel. then click the “Add” to add the IP channel.
Click “Search” to search out the IP channel on the network. double click one of the camera’s IP that you what. Click “OK” to do the channel adding
Tick the camera and click “OK”

NOTE:
The image will show on TV. Do the same for another channel. But please remember to add another camera’s IP, not the same IP to another channel.

If all your cameras show no image on TV like the picture below, you can add the cameras to the NVR manually to show the image.

Here are the steps.

1. Go to the Main Menu–>System–>Digital–>Digital channels:

2. Select channel number, and tick the option enable, and then click add:

3. Click search and double click one of the camera’s IP, and then tick the camera and click OK

The image will show on TV. Do the same for another channel. But please remember to add another camera’s IP, not the same IP to another channel.

<p>The post How To Add IP Camera to NVR-DVR Guide first appeared on NVR IPCAMERA SECURITY.</p>

1. Please check the network status of the system. If the users want to view the cameras remotely, the status must be online.  It could be checked on the Configuration–>Network–>Sannce Home–>Status:
   
   If the network status is offline, here is the way to fix: 
   https://support.sannce.com/hc/en-us/articles/900000545803
2. Please download the APP Sannce Home from Google Play or APP Store.
3. Please register the APP by using an email address or a phone number.
   • Firstly, please select the country and region for the APP account. It should be in accordance with the region where you plan to install the system.
     
   • Secondly, please click Login button. If you don’t have an account, please register the APP with an email address or a phone number. Besides, users need to agree on the privacy policy of the APP.
     
   • Thirdly, please input the email address/phone number to get the security code.
     
   • Fourthly, please set up a password for the APP account to finish the APP registration.
     
4. After the APP registration, please follow the below steps to add the system to the app. Here are 2 methods to add the system.

A: Adding by QR code 

• • Click the ‘+’ icon at the beginning:
    
  • Scan the QR code of the device. The QR code could be found in the Sannce Home section.
    

B: Adding by Serial Number.

• 1. • Click the Manual Adding and input the Serial No

       .

       

     • Add the device to the APP if the scan is successful.
       
     • Click Finish to complete the device adding.
       
     • The users could create a name for the device, or they could skip it.
       
  2. Finally, the cameras could be viewed on the APP.
     
  3. If the app asks for a verification code, here is the way to find it.

How to create and find the verification code?

Please go to Platform Access, click ‘Enable’ and create a “verification code” by yourself. Please note the verification code must be set up, otherwise, the network status of the NVR can’t be online.

When the Status is ‘Online‘, this system can be accessed remotely via the APP.

Tips:

1. If you don’t want to enter the verification code each time when remote view the camera, please uncheck stream encryption.

2. The special characters are not allowed when setting up the verification code.

<p>The post How to Add the Security System to APP HiLook Sannce first appeared on NVR IPCAMERA SECURITY.</p>

If you don’t have it on your computer already, download the IP Configuration Utility located here. Extract that file and then open up the folder that it created. Double click on the file show below:

Now in the ConfigTool window that was launched earlier, near the bottom left of the window, select IPv4 from the IP Version selection field and you should see some listings for the IP cameras connected. Click on the first one listed and then click on the Login button.

You should then see the following window appear:

Click on the Login button to enter into the menu that will allow you to upgrade your IP camera(s). Then click on the System Information tab and make note of the current build date of firmware that is in your camera and make sure that the version you downloaded is newer than the version on the camera.

Next, click on the System Upgrade tab and then click on the Open button.

Find the firmware file that you had downloaded, select it and then click on Open

After pressing the Open button, you should see the file path of the firmware file you selected in the Upgrade File field. Press the Upgrade button and you should see the progress bar move as the file is being transmitted and again as the upgrade process is occurring. Please do not disconnect or remove power to camera while this process is occurring, otherwise you may cause irreparable damage to the camera.

Once the upgrade process is completed, you will see the following window pop up, indicating that the upgrade process has completed. Click on the OK button and the camera will then reboot and the program will take you back to the main ConfigTool window.

The camera will take anywhere from 1-3 minutes to reboot fully. After this time, you can click on the Refresh button to see if the camera is again seen on the network. If you would like, you can log back into the camera and click on the System Information tab to see if the upgrade process reflects in the new firmware build date. Clicking on the Return button will take you back to main window. You will need to repeat this process for each of the cameras on your network, and also making sure that if you have differnent models of camera to use the correct firmware update file. Should you have any questions during this process, feel free to give our Technical Support department a call and they will be able to help you at any stage of this process.

<p>The post IP Camera Firmware Update Instructions first appeared on NVR IPCAMERA SECURITY.</p>

Synthesis of reset methods to recover the passwords of recorders, cameras. Hope everyone supports. If you have new reset methods or other carriers please email me to help me keep up to date with new methods and firms. Thank you.

CCTV Super Password

Download : Click Android

<p>The post CCTV Super Password New Version All Brand first appeared on NVR IPCAMERA SECURITY.</p>

SDP2000

Channels	Version Info	Time	Download Url
SDP2000（Windows）	SDP2000_EN_x64_V2.4.5	2020-12-16 14:38:18
SDP2000（Windows）	SDP2000_EN_x64_V2.5.2	2021-01-27 17:33:12

PC Client

Channels	Version Info	Time	Download Url
VMSLite (Windows)	VMSLite Setup8.2.44.2	2019-04-11 10:53:25	Download
VMSLite (Mac)	VMSLite for Mac8.2.29.6	2018-07-19 15:31:29
VMS (Windows)	VMS Setup8.2.29.6	2018-07-20 09:50:49
iVMS320(Windows)	iVMS320_V21.2.2.4	2021-01-15 16:17:18
iVMS320(Mac)	iVMS320 setup for Mac_21.2.5.4	2021-02-22 14:19:45
iVMS330(Windows)	iVMS330_20.2.42.5_Setup	2020-10-23 13:51:04

RK IP Camera

Resolution	Type	Firmware	Time	Download Url
2MP	AI	RV1109_IMX307_BASE_W_21.1.17.2	2021-04-28 16:18:48
		RV1109_IMX307NAND_BASE_W_21.1.12.5	2021-03-29 18:00:51
5MP	AI	RV1109_IMX335_BASE_W_21.1.12.4	2021-03-29 18:01:23
		RV1109_IMX335NAND_BASE_W_21.1.12.5	2021-03-29 17:57:25
8MP	AI	RV1126_IMX415_BASE_W_21.1.16.7	2021-04-28 16:01:42

Ambarella IP Camera

Resolution	Type	Firmware	Time	Download Url
2MP	Normal	s2l33m_imx322_W_7.1.25.1	2020-06-04 15:39:53
3MP	Normal	s2l55m_imx123_W_7.1.25.2	2020-06-04 15:40:25
4MP	Normal	S2L55M_OV4689_W_7.1.18.3	2020-06-04 15:42:54
6MP	FISHEYE	S2E66_IMX178_W_7.1.3.4	2020-06-04 15:43:12

Hisilicon IP Camera

Resolution	Type	Firmware	Time	Download Url
2MP	Normal	3516EV200_IMX307_B1T0A1M0C0P1_W_20.1.33.1	2021-02-06 16:07:09
		3516EV200_F23_B1T0A1M0C0P1_W_20.1.33.1	2021-02-06 16:02:03
	SD	3516CV500_IMX462_B1T1A2M1C2P1_W_20.1.32.5	2021-02-06 16:09:31
		3516EV200_IMX307_B1T1A1M0C0P1_W_20.1.33.1	2021-02-06 16:07:35
		3516CV500_IMX307_B1T1A2M1C2P1_W_20.1.33.4	2021-02-06 16:02:50
		3516EV200_F23_B1T1A1M0C0P1_W_20.1.33.1	2021-02-06 16:01:26
	PTZ	3516EV200_IMX307_X10T1A1M0C0P1_W_20.1.33.3	2021-02-06 16:59:48
		3516CV500_IMX462_X10T1A1M0C0P1_W_20.1.33.4	2021-02-06 16:59:02
	AI	3516CV500_IMX307_AR_EM_AF_BD_W_21.1.3.5	2021-02-06 17:05:11
		3516CV500_IMX307_AR_EM_BASE_BD_W_20.1.52.2	2021-01-20 10:56:02
		3516CV500_IMX327_AR_EM_BASE_BD_W_21.1.2.6	2021-01-20 10:54:38
4MP	MINI	3516DV300_IMX335_MINI_WIFI_BD_W_20.1.33.6	2021-02-06 16:53:02
5MP	Normal	3516DV200_IMX335_B1T0A1M0C0P1_W_20.1.47.6	2021-02-06 16:04:48
	SD	3516DV200_IMX335_B1T1A1M0C0P1_W_20.1.47.6	2021-02-06 16:05:08
		3516DV200_IMX335_B1T1A2M1C2P1_W_20.1.48.1	2021-02-06 16:03:56
	PTZ	3516DV200_IMX335_X80T1A2M1C0P1_W_21.1.5.7	2021-02-22 14:30:06
		3516DV200_IMX335_X10T1A1M0C0P1_W_20.1.47.6	2021-02-06 16:55:14
	AI	3516DV300_IMX335_AR_EM_BASE_BD_W_21.1.13.5	2021-04-12 11:04:03
		3516DV300_IMX335_AR_EM_AF_BD_W_21.1.11.2	2021-04-12 11:03:32
8MP	Normal	3516AV300_IMX415_B1T0A1M0C0P1_W_20.1.35.3	2021-02-06 15:54:48
	SD	3516AV200_OS08A10_B1T1A1M0C0P1_W_20.1.33.5	2021-02-06 15:56:08
		3516AV300_IMX415_B1T1A2M1C0P1_W_20.1.35.3	2021-02-06 15:55:20
	PTZ	3516AV300_IMX415_X10T1A2M1C0P1_W_20.1.32.5	2021-02-06 19:18:15
		3516AV200_OS08A10_X70T1A2M1C1P1_W_20.1.35.3	2021-02-06 16:56:56
	AI	3516AV300_IMX415_AR_EM_BD_W_21.1.12.4	2021-04-12 11:04:46

PTZ	3516AV300_IMX415_X10T1A2M1C0P1_W_20.1.32.5	2021-02-06 19:18:15
	3516AV200_OS08A10_X70T1A2M1C1P1_W_20.1.35.3	2021-02-06 16:56:56
	3516AV200_IMX274_AF4X_AUDIO_TF_W_8.1.15.2	2020-06-04 15:27:21
WIFIIPC_SD	3516AV200_OS08A10_W2T1A1M0C1P1_W_9.1.1.5	2020-06-04 15:27:44
AI	3516AV300_IMX415_AR_EM_BD_W_21.1.12.4	2021-04-12 11:04:46
12MP	SD	3519V101_IMX226_B1T1A1M0C0P1_W_20.1.13.2	2020-06-04 15:28:08
	BOX	3519V101_IMX226_BOX_BD_W_9.1.1.6	2020-06-04 15:28:22
	PTZ	3519V101_IMX226_X70T1A2M1C1P1_W_20.1.13.2	2020-06-04 15:28:37
	FISHEYE	3519V101_IMX226_FISHEYE_W_9.1.16.1	2020-06-04 15:36:22
		3519V101_IMX226_FISHEYE_BD_W_9.1.46.3	2020-06-04 15:30:04

SigmaStar

Resolution	Type	Firmware	Time	Download Url
2MP	AI	SSC336Q_SC200AI_W_21.1.12.2	2021-04-12 10:56:48
5MP	AI	SSC338Q_SC500AI_W_21.1.12.2	2021-04-12 10:58:33
8MP	AF	SSC338Q_SC8238_W_20.1.48.2	2021-01-18 16:35:12
	WH	SSC338Q_SC500AI4K_W_21.1.13.2	2021-04-12 10:59:31

Fullhan IP Camera

Resolution	Type	Firmware	Time	Download Url
2MP	Normal	FH8852_IMX307_B1T0A1M0C0P1_W_20.1.51.3	2021-02-06 16:46:23
		FH8852_F23_B1T0A1M0C0P1_W_20.1.51.3	2021-02-06 16:45:00
		FH8852_F23_B1T0A1M0C0P2_W_20.1.27.4	2021-02-06 16:44:14
		FH8852_IMX307_B1T0A1M0C0P2_W_20.1.29.3	2020-08-07 19:19:34
		FH8830_F22_W_8.1.11.5	2020-06-04 15:43:29
3MP	FISHEYE	FH8830_AR0330_FISHEYE_W_9.1.15.4	2020-06-04 15:46:30
		FH8830_AR0330_FISHEYE_BD_W_9.1.2.1	2020-06-04 15:43:43
4MP	Normal	FH8856_IMX335_B1T0A1M0C0P1_W_20.1.39.2	2021-02-06 16:49:27
		FH8856_IMX335_B1T0A1M0C0P2_W_20.1.27.3	2020-08-07 16:50:26
5MP	Normal	FH8856_K05_B1T1A1M0C0P1_W_20.1.10.4	2020-08-07 19:10:28
	SD	FH8856_K05_B1T1A1M0C0P1_W_20.1.10.4	2020-08-07 19:10:00
	WIFIIPC_SD	FH8856_K05_W1T1A1M0C0P1_W_20.1.35.4	2021-02-06 16:50:32
		FH8856_K05_W1T1A1M0C0P2_W_20.1.28.2	2020-08-07 16:14:08

NVR

Channels	Version Info	Time	Download Url
4CH	NVR_HI3798_4CH	2019-10-15 16:38:28
9CH	NVR_SS621Q_9CH_4POE_PNP_BD_V5_update_V21.1.2.5	2021-01-22 11:31:31
	NVR_MC6830_9CH_4POE_PNP_BD_V5_update_KITS_V20.1.43.5	2021-01-14 10:17:01
	NVR_SS621Q_9CH_BD_V5_update_V21.1.1.4	2021-01-08 08:31:14
	HI3536E_H265_9CH_BD_V5_update_V20.1.52.1	2021-01-06 10:48:46
	NVR_MC6830_9CH_AL_V5_update_V20.1.47.3	2021-01-06 10:12:45
	NVR_MC6830_9CH_BD_V5_update_V20.1.49.1	2020-12-02 15:29:34
	NVR_MC6830_9CH_4POE_PNP_BD_V5_V20.1.43.5	2020-10-27 08:31:52
	NVR_HI3536D_H265_2G_9CH_BD_V5_V20.1.34.3	2020-08-24 09:53:58
	NVR_HI3536D_H265_9CH_4POE_PNP_BD_V5_V20.1.34.3	2020-08-24 09:51:47
	NVR_HI3536D_H265_9CH_8POE_PNP_BD_V5_V20.1.34.3	2020-08-24 09:47:51
	NVR_HI3536D_H265_2G_8POE_BD	2020-03-03 10:06:06
	NVR_HI3536D_H265_9CH_4POE_PNP_BD	2020-02-24 09:22:24
	NVR_HI3536D_H265_2G_9CH_BD	2020-01-17 14:36:47
	NVR_HI3798_9CH	2019-10-15 16:39:12
	NVR_HI3536D_H265_36D08.216.8POE.V8.1.19.1	2018-07-27 11:18:27
	NVR_HI3536D_H265_36D04.216.4POE.V8.1.19.1	2018-07-27 11:16:51
16CH	NVR_MC6830_16CH_BD_V5_update_V21.1.17.4	2021-05-06 15:13:34
	NVR_MC6830_16CH_8POE_PNP_BD_V5_update_V21.1.12.6	2021-03-29 16:43:49
	NVR_SS621Q_16CH_8POE_PNP_BD_V5_update_V21.1.2.4	2021-01-22 13:41:20
	NVR_SS621Q_16CH_BD_V5_update_V21.1.2.1	2021-01-14 10:08:50
	NVR_MC6830_16CH_AL_V5_update_V20.1.47.3	2021-01-06 10:18:25
	NVR_HI3536C_H265_16CH_8POE_PNP3_BD_V5_V20.1.36.4	2020-09-07 14:44:55
	NVR_HI3536C_H265_16CH_4POE_PNP3_BD_V5_V20.1.36.4	2020-09-07 14:37:29
	NVR_HI3536D_H.265_4G_16CH_BD_V5_V20.1.35.3	2020-08-29 16:11:39
	NVR_HI3536C_H265_16CH_8POE_PNP3_BD_KITS	2020-07-14 13:40:02
	NVR_HI3536C_H265_16CH_4POE_PNP3_BD_KITS	2020-07-14 10:34:15
	NVR_HI3536C_H265_16CH_8POE_PNP3_BD_V5_KITS	2020-07-14 10:18:00
	NVR_HI3536C_H265_16CH_4POE_PNP3_BD_V5_KITS	2020-07-14 10:08:26
	NVR_HI3536C_H265_16CH_8POE_BD	2020-03-06 09:02:22
	NVR_HI3536C_H265_16CH_4POE_PNP3_BD	2020-01-17 15:08:08
	NVR_HI3536C_H265_16CH_8POE_PNP3_BD	2020-01-17 14:55:20
	NVR_HI3536D_H.265_4G_16CH_BD	2019-12-27 15:17:16
	NVR_HI3536C_H265_16CH_BD	2019-11-07 16:34:41
	NVR_HI3798_16CH	2019-10-15 16:39:52
	NVR_HI3536C_H265_16CH_8POE_PNP2_BD	2019-09-16 13:50:50
	NVR_HI3536C_H265_36C08.8POE.PNP.V8.1.26.2	2018-07-27 11:44:56
	NVR_HI3536C_H265_36C16.V8.1.15.2	2018-07-27 11:34:20
25CH	NVR_MC6830_25CH_BD_V5_update_V20.1.49.3	2021-01-06 10:28:06
	NVR_HI3536C_H265_25CH_16POE_PNP2_BD_V5_V20.1.37.4	2020-09-12 09:13:22
	NVR_HI3536C_H265_25CH_BD_V5_V20.1.36.4	2020-09-07 15:07:05
	NVR_HI3536C_H265_25CH_16POE_PNP3_BD_V5_V20.1.36.4	2020-09-07 14:58:58
	NVR_HI3536C_H265_25CH_16POE_PNP2_BD	2020-04-20 17:06:06
	NVR_HI3536C_H265_25CH_BD	2020-01-17 15:20:17
	NVR_HI3536C_H265_25CH_16POE_PNP3_BD	2019-12-19 19:06:55
	NVR_HI3536C_H265_36C16.16POE.PNP.V8.1.27.3	2018-07-27 13:38:36
	NVR_HI3536C_H265_36C25.V8.1.15.2	2018-07-27 13:33:58
	NVR_HI3535_25_V	2017-10-26 14:00:57
36CH	NVR_HI3536_H265_36CH_X1_BD_V5_V20.1.37.6	2020-09-12 17:27:23
	NVR_HI3536_H265_36CH_BD_V5_V20.1.35.2	2020-08-26 11:06:59
	NVR_HI3536_H265_36CH_BD	2020-02-21 16:45:09
	NVR_HI3536_H265_36CH_X1_BD	2019-09-16 15:30:50
	NVR_HI3536_36_V8.1.20.5	2018-07-27 13:47:16
64CH	NVR_HI3536_H265_64CH_BD_V5_V20.1.37.4	2020-09-12 15:11:48
	NVR_HI3536_H265_64CH_BD	2020-03-13 15:45:58
	NVR_HI3536_64_V9.1.13.5	2019-04-13 15:11:55

XVR

Channels	Version Info	Time	Download Url
4CH	XVR_MC6630_2830_4_BD_V5_updateV21.1.11.1	2021-03-19 09:38:16
	XVR_MC6630_2830_4_BD_4G_V5_updateV21.1.9.4	2021-03-10 14:24:35
	XVR_MC6630_2830_4_AL_V5_updateV20.1.48.2	2021-01-06 16:33:09
	XVR_MC6630_2830_4_AL_4G_V5_updateV20.1.48.5	2021-01-06 16:28:16
	XVR_3520DV400_6158C_4_BD_4G_V5_updateV20.1.27.1	2020-06-30 20:04:02
	XVR_3520DV400_6158C_4_BD_V5_updateV20.1.27.1	2020-06-30 09:17:00
	XVR_3521D_6158_4_BD_V5_updateV20.1.25.6	2020-06-23 10:56:00
	XVR_3520DV400_6158C_4_BD_2G_V5_updateV20.1.25.6	2020-06-23 10:53:42
	XVR_3531D_6158_4_BD_V	2020-05-21 14:10:48
	XVR_3520DV400_6158C_4_BD_4G_V	2020-05-07 10:10:24
	SDI_DVR_3521D_334S_4_BD_V	2020-04-28 14:38:49
	XVR_3520DV400_6158C_4_BD_V	2020-04-09 17:22:06
	XVR_3521D_6158_4CH_BD_V	2020-04-07 10:47:07
	XVR_3520DV400_6158C_4_BD_2G	2019-08-16 09:00:44
	XVR_3520DV200_6134C_4_v	2019-03-08 15:05:02
	XVR_3520DV400_6158_4_BD_V	2019-02-28 14:07:49
	XVR_3520DV200_6134C_4_BD_V	2019-01-30 16:31:38
	XVR_3521D_6158_SMARTKITS_4_BD_V	2019-01-09 14:09:24
	XVR_3520DV200_6134C_SMARTKITS_4_BD_V	2019-01-09 10:29:13
	XVR_HI3520DV200_4_V	2018-10-25 15:53:28
	XVR_3520DV200_4_v	2018-06-14 20:16:43
	XVR_3531D_6158_4_v	2018-06-14 20:06:20
	SDI_DVR_3521A_334S_4_v	2018-04-23 18:39:49
	XVR_3521D_6158_4_v	2018-04-23 18:35:38
	XVR_3520DV300_2826_4_v	2018-04-23 18:24:39
	XVR_3521A_2826_4_v	2018-04-23 18:04:09
	XVR_HI3521A_4_v	2017-10-26 16:05:50
8CH	XVR_MC6630_2830_8_BD_V5_updateV21.1.10.5	2021-03-16 10:48:26
	XVR_MC6630_2830_8_AL_V5_updateV20.1.48.2	2021-01-06 16:37:17
	XVR_3531D_6158_8_BD_V5_updateV20.1.25.6	2020-06-23 10:55:33
	XVR_3521D_6158C_8_BD_V5_updateV20.1.25.6	2020-06-23 10:54:31
	XVR_3520DV400_6158C_8_BD_V5_updateV20.1.24.4	2020-06-15 09:10:15
	XVR_3520DV400_6158C_8_BD_V	2020-04-30 15:39:08
	SDI_DVR_3531D_334S_8_BD_V	2020-04-28 16:55:44
	XVR_3531D_6158_8_BD_V	2020-04-20 16:07:30
	XVR_3521D_6158C_8_BD_V	2020-04-07 10:41:55
	XVR_3521D_6158_8_BD_V	2019-03-11 14:07:43
	XVR_3520DV300_6134C_8_v	2019-03-08 15:05:49
	XVR_3520DV400_6134C_8_BD_V	2019-03-01 09:10:08
	XVR_3531DCAS_6158_16_8_BD_V	2019-01-29 15:11:55
	XVR_3531DCAS_6158_8_BD_V	2019-01-19 15:00:33
	XVR_HI3531A_8_v	2018-07-03 09:31:45
	XVR_3521D_6158_8_v	2018-06-15 08:42:00
	XVR_3520DV300_8_v	2018-06-14 19:56:18
	SDI_DVR_3531A_334S_8_v	2018-04-23 19:04:14
	XVR_3531D_6158_8_v	2018-04-23 19:02:21
	XVR_3521A_2826_8_v	2018-04-23 18:55:07
	XVR_3531A_2826_8_v	2018-04-23 18:48:12
	XVR_HI3520DV300_8_v	2018-02-09 16:14:20
16CH	XVR_3531DCAS_6158_16_BD_V5_updateV20.1.27.3	2020-07-02 08:37:00
	XVR_3531D_6158C_16_BD_V5_updateV20.1.24.4	2020-06-15 09:11:37
	XVR_3531D_6158C_16_2_BD_V5_updateV20.1.24.4	2020-06-15 09:11:18
	XVR_3521D_6158C_16_BD_V5_updateV20.1.24.4	2020-06-15 09:10:54
	SDI_DVR_3531DCAS_334S_16_BD_V	2020-05-27 15:59:26
	XVR_3531DCAS_6158_16_BD_V	2020-05-21 08:51:20
	XVR_3531D_6158C_16CH_2_BD_V	2020-04-20 19:19:14
	XVR_3531D_6158C_16_BD_V	2020-04-20 19:15:57
	XVR_3521D_6158C_16_BD_V	2020-04-07 10:44:06
	XVR_3531D_6158C_16_BD_X1_V	2019-09-23 16:57:22
	XVR_3521D_6134C_16_BD_V	2019-03-15 13:39:18
	XVR_3531D_6158_16_BD_V	2019-01-19 14:57:17
	XVR_3531A_2826_16_v	2018-09-17 17:15:07
	XVR_3521D_6134C_16_v	2018-07-27 11:05:18
	XVR_3521A_16_v	2018-07-16 15:38:04
	XVR_3531D_6158_16_v	2018-06-15 08:43:36
	XVR_HI3521A_16_v	2018-06-15 08:34:06
32CH	XVR_3531DCAS_6158_32_BD_V	2019-04-24 15:10:29
	XVR_3531D_6134C_32_BD_V	2019-01-30 09:46:04
	XVR_3531A_2816_32_v	2018-04-23 19:15:13
	XVR_HI3531A_32_v	2018-02-09 16:53:32

Wifi kits

Resolution	Type	Firmware	Time	Download Url
1MP	4CH	NVR_WIFIHI3520D2G_4_V8.1.29.1	2020-06-04 15:59:40
		3518EV200_OV9732_W_WIFIKITS_8.1.5.4	2020-06-04 15:59:21
	9CH	NVR_HIWIFI3520D2G_9_V8.1.33.5	2020-06-04 15:59:03
		3518EV200_OV9732_W_WIFIKITS_8.1.5.4	2020-06-04 15:58:34
2MP	4CH	3518EV300_SP2309_W3T0A0M0C0P0_W_21.1.5.2	2021-02-24 15:07:53
		NVR_WIFIHI3520D2G_4_V8.1.29.1	2020-06-04 16:02:47
		3518EV200_IMX323_WIFIKITS_W_8.1.3.5	2020-06-04 16:02:25
		NVR_WIFI3536D2G_SW01_4_V8.1.32.2	2020-06-04 16:02:09
		3516EV100_F23_W30T0A0M0C0_W_8.1.29.2	2020-06-04 16:01:50
		3516EV100_F23_W30T0A2M0C0_W_8.1.29.2	2020-06-04 16:01:32
		3516EV100_F23_W30T0A0M4C0_W_8.1.29.2	2020-06-04 16:01:13
		3516EV100_F23_W30T0A0M3C0_W_8.1.29.2	2020-06-04 16:00:55
		NVR_WIFI3536D2G_SW01_BD_4_V9.1.1.4	2020-06-04 16:00:39
	9CH	FH8852V200W_JXF23_W3T0A0M0C0P0_W_21.1.9.1	2021-03-10 14:11:00
		3518EV300_SP2309_W3T0A0M0C0P0_W_21.1.5.2	2021-02-24 15:08:32
		NVR_SS621Q_9CH_WIFI_SW03_BD_V5_update_V21.1.6.4	2021-02-06 19:43:34
		NVR_HIWIFI3520D2G_9_V8.1.33.5	2020-06-04 16:05:18
		3518EV200_IMX323_WIFIKITS_W_8.1.3.5	2020-06-04 16:04:59
		NVR_WIFI3536D2G_HW01_8_V8.1.21.1	2020-06-04 16:04:41
		3516EV100_F23_W30T0A0M0C0_W_8.1.29.2	2020-06-04 16:04:20
		3516EV100_F23_W30T0A2M0C0_W_8.1.29.2	2020-06-04 16:04:05
		3516EV100_F23_W30T0A0M3C0_W_8.1.29.2	2020-06-04 16:03:46
		3516EV100_F23_W30T0A0M4C0_W_8.1.29.2	2020-06-04 16:03:32
		NVR_WIFI3536D2G_HW01_BD_9_V9.1.1.4	2020-06-04 16:03:11
4MP	4CH	NVR_WIFI3536D2G_SW01_4_V8.1.32.2	2020-06-04 16:05:58
		3516D_OV4689_W_WIFIKITS_8.1.20.4	2020-06-04 16:05:37
	9CH	NVR_HIWIFI3798_9_V7.1.38.2	2020-06-04 16:09:01
		3516D_OV4689_W_WIFIKITS_8.1.20.4	2020-06-04 16:06:45
		NVR_WIFI3536D2G_HW01_8_V8.1.21.1	2020-06-04 16:06:27
5MP	4CH	FH8856V500W_JXK05_W3T0A0M0C0P0_W_21.1.9.1	2021-03-10 14:52:05
		NVR_SS621Q_4CH_WIFI_SW03_BD_V5_update_V21.1.6.4	2021-03-10 14:50:25
		NVR_WIFI3536D2G_HW01_4_V8.1.38.5	2020-06-04 16:11:58
		3516D_OS05A10_W30T0A1M0C1_W_8.1.38.3	2020-06-04 16:11:28
		NVR_WIFI3536D2G_HW01_BD_4_V9.1.1.4	2020-06-04 16:11:08
		NVR_WIFI3536D2G_SW01_BD_4_V9.1.1.4	2020-06-04 16:10:41
8MP	4CH	FH88568_JXK05_W3T0A0M0C0P0_W_21.1.9.1	2021-03-10 14:43:37
		NVR_SS621Q_4CH_WIFI_SW03_BD_V5_update_V21.1.6.4	2021-02-06 17:52:14

Tools

Tool name	Version Info	Time	Download Url
Search Tool(Windows)	SearchTool_setup20.2.52.1	2020-12-25 14:36:16
Search Tool(Mac)	SearchTool_8.2.14.2	2018-04-19 15:01:26
IPWizardIII(Windows)	IPWizardIII_2.2.5	2018-11-07 16:38:30
TestTool(Windows)	TestTool_v2.0.3.6906	2020-07-08 15:01:38

Manual

Class	Title	Language	Type	Time	Download Url
IPC	Wi-Fi IP Camera Quick Start Guide Ali	English	pdf	2020-07-13 11:28:52
	Smart IP Camera Quick Start Guide Ali	English	pdf	2020-07-13 11:28:17
	IP Camera Quick Start Guide Ali	English	pdf	2020-07-13 11:27:47
	Wi-Fi IP Camera Quick Start Guide 350	English	pdf	2020-07-13 11:11:09
	Smart IP Camera Quick Start Guide 350	English	pdf	2020-07-13 11:10:39
	IP Camera Quick Start Guide 350	English	pdf	2020-07-13 11:10:01
	Dual Smart IP Camera Quick Start Guide BD	English	pdf	2020-07-13 11:00:58
	Camera Quick Installation Guide（Split Type）	English	pdf	2019-09-30 15:37:20
	IP Camera Quick Start Guide CK	English	pdf	2019-08-15 13:35:42
	Wi-Fi IP Camera Quick Start Guide BD	English	pdf	2019-07-12 10:18:00
	Smart IP Camera Quick Start Guide BD	English	pdf	2019-05-14 16:48:50
	IP Camera Quick Start Guide BD	English	pdf	2018-09-21 08:33:56
	Camera Quick Installation Guide	English	pdf	2018-06-19 16:11:51
	WiFi IP Camera Quick Start Guide	English	pdf	2018-06-19 16:11:38
	IP Camera User Manual	English	pdf	2018-06-19 16:11:19
	IP Camera Quick Start Guide	English	pdf	2018-06-19 09:25:31
NVR	NVR Quick Start Guide BV_5.0	English	pdf	2020-08-03 16:20:12
	NVR Quick Start Guide Ali_5.0	English	pdf	2020-08-03 16:19:40
	NVR Quick Start Guide 350_5.0	English	pdf	2020-08-03 16:18:41
	NVR User Manual_5.0	English	pdf	2020-05-28 13:34:56
	NVR Quick Start Guide BD_5.0	English	pdf	2020-04-09 16:26:42
	Wi-Fi NVR Quick Start Guide BD	English	pdf	2019-10-18 14:04:24
	Smart NVR Quick Start Guide BD	English	pdf	2019-07-09 17:00:34
	NVR Quick Start Guide BD	English	pdf	2018-09-03 09:02:14
	NVR User Manual	English	pdf	2018-06-19 16:12:58
	NVR Quick Start Guide	English	pdf	2018-06-19 09:32:18
XVR	XVR User Manual_5.0	English	pdf	2020-11-11 17:47:54
	XVR Quick Start Guide BV_5.0	English	pdf	2020-08-03 16:32:42
	XVR Quick Start Guide 350_5.0	English	pdf	2020-08-03 16:31:59
	XVR Quick Start Guide Ali_5.0	English	pdf	2020-08-03 16:31:34
	XVR Quick Start Guide BD_5.0	English	pdf	2020-06-09 17:16:09
	Smart XVR Quick Start Guide	English	pdf	2019-09-03 08:39:55
	XVR Quick Start Guide BD	English	pdf	2018-09-04 16:11:40
	XVR Quick Start Guide	English	pdf	2018-06-19 16:26:52
	XVR User Manual	English	pdf	2018-06-19 16:26:30
EX-SDI&HD-SDI DVR	EX-SDI&HD-SDI DVR User Manual	English	pdf	2018-12-21 08:28:55
	EX-SDI&HD-SDI DVR Quick Start Guide BD	English	pdf	2018-09-03 09:07:57
	EX-SDI&HD-SDI DVR Quick Start Guide	English	pdf	2018-07-11 10:15:48
PLC Kits	PLC Kits Quick Start Guide	English	pdf	2018-06-19 16:30:26
PoE Kits	PoE Kits Quick Start Guide BD	English	pdf	2020-07-17 16:47:43
	PoE Kits Quick Start Guide BD 5.0	English	pdf	2020-07-17 16:29:19
WiFi Kits	Wi-Fi Kits Quick Start Guide BD 5.0	English	pdf	2021-03-30 10:25:27
	Wi-Fi Kits Quick Start Guide BD	English	pdf	2021-03-17 14:29:38
	Non-economical Wi-Fi Kits Quick Start Guide BD	English	pdf	2019-07-11 16:28:04
	Economy Wi-Fi Kits Quick Start Guide BD	English	pdf	2019-07-11 16:26:58
	Smart Wi-Fi Kits Quick Start Guide	English	pdf	2018-09-03 08:40:56
	Smart Wi-Fi Kits Quick Start Guide BD	English	pdf	2018-08-24 09:40:43
	Economy WiFi Kits Quick Start Guide	English	pdf	2018-06-19 16:37:07
	Non-economical WiFi Kits Quick Start Guide	English	pdf	2018-06-19 16:36:55
XVR Kits	XVR Kits Quick Start Guide BD 5.0	English	pdf	2020-07-17 16:27:25
	XVR Kits Quick Start Guide BD	English	pdf	2019-01-07 17:10:53
	Smart XVR Kits Quick Start Guide BD	English	pdf	2018-08-24 09:41:18
	XVR Kits Quick Start Guide	English	pdf	2018-06-19 16:40:16
	Smart XVR Kits Quick Start Guide	English	pdf	2018-06-19 16:40:02
Consumer WiFi Camera	LongPlus Quick Start Guide	English	pdf	2021-03-17 14:26:03
	Consumer Fisheye Camera P3 Quick Start Guide	English	pdf	2018-06-19 16:40:37
PoE Switch	HT812(100M&1000M) HT811 HT412 HT1612 Series PoE Switch Quick Start Guide	English	pdf	2019-04-03 08:53:12
	RT2418 Managed Optical Fiber PoE Switch Quick Start Guide	English	pdf	2018-11-06 14:23:13
	24+2+2 Unmanaged Optical Fiber PoE Switch Quick Start Guide	English	pdf	2018-06-19 16:41:30
	24+2 Managed PoE Switch Quick Start Guide	English	pdf	2018-06-19 16:40:56
Search Tool	Search Tool User Manual for Win&Mac	English	pdf	2018-06-19 17:03:49
App	iVMS380 App User Manual	English	pdf	2020-11-09 14:52:33
	Aliluya App User Manual	English	pdf	2020-08-03 15:24:55
	iVMS350 App User Manual	English	pdf	2020-08-03 15:24:20
	ACESEE App User Manual	English	pdf	2019-09-02 10:10:19
	iVMS320 App User Manual	English	pdf	2019-01-16 09:59:10
	BitVision App User Manual	English	pdf	2018-12-20 17:21:30
	FreeIP App User Manual	English	pdf	2018-06-19 16:42:20
	VR Panorama App User Manual	English	pdf	2018-06-19 16:42:05
VMS	iVMS330 Plateform User Manual for windows	English	pdf	2020-11-09 15:06:16
	iVMS320 User Manual for Mac	English	pdf	2019-04-15 15:28:59
	iVMS320 Plateform User Manual for win	English	pdf	2019-04-15 15:28:02
	VMS User Manual for Mac	English	pdf	2018-06-19 16:48:21
	VMS User Manual for Win	English	pdf	2018-06-19 16:48:06
	VMS Lite User Manual for Mac	English	pdf	2018-06-19 16:45:35
	VMS Lite User Manual for Win	English	pdf	2018-06-19 16:45:24
Coaxial	Camera Quick Installation Guide(Split Type)	English	pdf	2019-11-01 15:35:23
Smart Device	Smart Device 2000 Quick Start Guide 02GYWT	English	pdf	2021-04-20 14:51:30
	Smart Device 2000 Quick Start Guide 02GYT	English	pdf	2021-04-20 14:50:55
	Thermal Smart IP Camera Quick Start Guide BMMH256	English	pdf	2021-04-07 19:10:11
	Dual Smart IP Camera Quick Start Guide BD BMMH32	English	pdf	2021-04-07 19:08:54
	AI BOX Quick Start Guide 5.0	English	pdf	2021-03-30 10:35:09
	Thermal Smart IP Camera Quick Start Guide	English	pdf	2021-03-09 14:58:56
	AI Face Recognition Device User Manual	English	pdf	2020-12-25 11:02:19
	AI Face Recognition Device Quick Start Guide 05GRW	English	pdf	2020-12-14 09:24:26
	AI Face Recognition Device Quick Start Guide 05GR	English	pdf	2020-12-12 14:45:36
	Thermal Smart IP Camera Quick Start Guide OWL256	English	pdf	2020-11-24 10:20:05
	Dual Smart IP Camera Quick Start Guide BD OWL32	English	pdf	2020-11-24 10:19:21
	Thermal Smart IP Camera User Manual	English	pdf	2020-11-04 09:13:13
	Thermal Smart IP Camera Quick Start Guide CMLDISS500T-256	English	pdf	2020-11-04 09:12:37
	Temperature Measuring Metal Detector Security Gate BD CMLDISS500T	English	pdf	2020-11-04 09:11:47
	Smart Device 2000 Quick Start Guide 03AY	English	pdf	2020-11-04 09:09:55
	Smart Device 2000 Quick Start Guide 03AYW	English	pdf	2020-08-03 15:13:17
	Smart Device 2000 Quick Start Guide 02GY	English	pdf	2020-08-03 15:11:47
	Smart Device 2000 Quick Start Guide 02GYW	English	pdf	2020-08-03 15:10:26
	Smart Device 2000 Quick Start Guide 02GYH	English	pdf	2020-08-03 15:08:36

BitVision

Channels	Version Info	Time	Download Url
BitVision	BitVision_Android_V20.1.46.1	2020-11-13 09:38:58

ACESEE

Channels	Version Info	Time	Download Url
ACESEE	ACESEE_Android_V1.0.2	2021-05-07 17:34:23
	ACESEE_PC(Windows)_V1.0.0.10	2021-05-07 17:33:41

iVMS350

Channels	Version Info	Time	Download Url
iVMS350	IOT_iVMS350_Android_V21.1.05.3	2021-01-28 13:32:52
	IOT_iVMS350_Android_V20.1.41.4	2021-01-14 08:28:39
	IOT_iVMS350_Android_V20.1.39.1	2020-09-29 09:37:17
	IOT_iVMS350_Android_V20.1.36.4	2020-09-15 16:59:00

LongPlus

Channels	Version Info	Time	Download Url
LongPlus	LongPlus_Android_21.1.16.2	2021-04-25 11:57:28
	LongPlus_Android_V20.1.22	2021-02-05 09:32:08

<p>The post HEROSPEED New All Firmware Software Tools Download first appeared on NVR IPCAMERA SECURITY.</p>

1)Get the SecuerCRT package, installation according to clew click next, do not need to configure until completion.

2)Click the SecuerCRT icon,appear below pic,set serial port

Click File→connect,see as follow pic

Choose “sessions”,ans click(new session),see as follow pic

In the protocol options choose “serial”,and click next.

Notice: wo can look up our computer to choose which port is. my computer →device manager→port(COM and LPT),the default have com1 ang com2,so we can choose either of them.

Fill in the datas as the pic,cilck next

Click “finish”.

• Installation and configuration of TFTPServer:
• Get the TFTPServer package,and unzip it.
• Click the “TFTPServer.exe”icon,see as below pic

Click (option),see as below pic

Log file name(L):this route is where you installation the TFTPServer

TFTPServer root:the route of upgrade program

• The serial port cable which connect with computer(direct serial cable),show as below pic

Both ends of the serial cable for RS232 head.

• TTL converter

The needs for TTL converter is not the same for different devices.

• Cross serial cable and direct serial cable

Usually we just use 2,3,5.

2——RXD Receive Data

3——TXD Transmit Data

5——GND System ground

The cross connection method:2 connect with middle round hole of our equipments;3 connect with square hole;5 connect with the other round hole.

The direct connection method:3 connect with the equipment’s middle round hole;2 connect with square hole;5 connect with the other round hole.

Here we’ve already separated cross serial cable from direct serial cable,and signaled it.

The red stands for direct serial cable;blue stands for cross serial cable.as follow pic:

• Next I’ll introduce our devices which needs TTL converter, which needs direct serial cable or cross serial cable.
• When we use the TTL converter ,we also need use the direct serial port cable.

Support device: DVR5004A-B,DVR5008A-B,DVR5004C-B,DVR5008C-B,DVR5004C-S

DVR5008C-S,DVR5016C-S,DVR5004T-S,DVR5008T-S and so on.

The wiring pic as bellow,for example 5004T-S

Find the serial port, in the lower left corner of device

The whole of connection as follows

Here we use direct serial port cable,the other head of cable connect with TTL converter.

Above all those sets ,we have the environment to upgrade the device,connect COM1

Click “connect”,and reboot the device,see as follow pic tips

Press control+c, into the command line

When upgrading,make sure that the computer connect with device all the time.

Use “updata.img”package to upgrade the device.

Open “TFTPServer.exe”,and choose the right route where you put the program is

Input command:

U-boot # sip 10.6.1.17(here Ip is your computer Ip,you also can check it over the TFTPServer)

U-boot # lip 10.6.2.17(here Ip is dvr’s temporary Ip,make sure that it is in the same route with computer )

U-boot # run up (start upgrading)

After finish upgrading,it will return u-boot mode automatically,reboot the device.

• It needs cross serial port cable when the TTL converter is not used.The cross serial cable connect with computer directly,and the other head connect with device.

Support device:DVR5004C-C,DVR5008C-C,DVR5016C-C.DVR5008E-S,DVR5016E-S,

DVR5024E-S,DVR5032E-S,DVR5004E-E,DVR5008E-E,DVR5016E-E,DVR5004H-E,

DVR5008H-E,DVR5016H-E,DVR5016H-S,DVR5014H-E,DVR5018H-E,DVR5116H-E.

DVR5116H-S and so on.

<p>The post Device repair with serial TTL RS232 first appeared on NVR IPCAMERA SECURITY.</p>

<p>The post Hisilicon IP Camera CD Content (Manual&Software) first appeared on NVR IPCAMERA SECURITY.</p>