How to upgrade older TKH Security Firmwares

The latest 360v2-series cameras firmware carries “UX“ in its firmware filename, where previously “U“ was used. This change is minor and does not mean much with regards to the functionality of the firmware. However, some older “U” do not allow direct upgrade to the latest “UX“ firmware.

In these cases, an intermediate step must be taken: first upgrade firmware to the nk20210916UX version; after this, the camera will allow the firmware upgrade to the latest version found on the public download pages.

This intermediate firmware version nk20210916UX can be downloaded from here:

https://tkhs-install-files.s3.eu-central-1.amazonaws.com/Siqura/Firmware/360v2-series+(U)/360v2-series+fixed+(nk20210916UX).zip

Load More :

1. Using Your Uniview NVR
2. How to set up Zosi POE NVR System
3. Spot AI IVR Installation Guide

Where can I find the latest firmware?

The latest firmware can you find on our website. Click here

When you can’t find the firmware for your product or you need another version.
Please contact us: support.nl@tkhsecurity.com

*How to update iProtect™ to 10.1

How to update the iProtect™ Application.

Download the latest files on our download section of the knowledgebase:

*iProtect™ – Software Downloads | Version 10.1 and lower:

Prechecks

Before the update it is required that the state of the system is known. Not functioning readers, nodes and lines must be noted.

Compatibility and discontinued hardware/software is noted in the release notes:

https://tkhsecurity.atlassian.net/l/cp/Co1YADGz

Minimal requirements:

• Firmware inbraak (Unii 2.4.0 / ML 5.0.5 / XL 3.11)

• Rootfs Pluto’s (5.68a)

• Firmware polyx (UBIFS)

• Diva/Sense (2.5)

Update

Download the Backup from the maintenance page.

Upload the new iProtect™ version at the maintenance page

• Go to the iProtect™ maintenance page (Click on the gear button on the login screen)

• Install > Upload iProtect (1)

• Click on the “…” button and select the new iProtect™ version at the maintenance page and click on the “Post” button.

When the “Check requirements” button appears, press it and a check will be done. Check the log and see what is needed to continue. This is also a good moment to install the ServicePack.

Click on the “…” button and select the ServicePack you want to install and click on the “Post” Button.

You can follow the installation process at the realtime logging, the Apache2 web server will restart multiple times, this will cause an interruption of the iProtect™ Gui and maintenance page.

You need to wait (10 minutes max) till you see the message below in the Realtime logging.

iProtect™ atlas: Installation ServicePack … finished.

Sometimes a reboot of the server is required, you will see a notification of this in the messages.

Install the new iProtect™ version at the maintenance page 

• Click on the “Check Requirements” button.

• if the check is passed you get a “Start Upgrade” button and can start the update by a click on this button.

You can follow the installation at the User interface logging, if you see the messages below the Gui is ready and you can login in iProtect™ again (only the root user can login at this point)

You must delete browser history before logging in to iProtect.

Installing the new license if iProtect version was < 10.1:

https://tkhsecurity.atlassian.net/l/cp/51UgXjhX

If a new license is needed, please contact our orderdesk.

Activating lines

To be sure all lines and nodes gets the latest software, select the system default Provisioner group.

• Go to iProtect™ menu option Installation > Hardware > Line

• Select System default at the Provisioner group options.

The components under the line config will automatically be provided with the latest firmware version.

Activate the line’s now, the Door controllers will get the new software and start with the installation automatically. The doors will be non-functional for 5-10 minutes. Open doors beforehand if they are critical.

Finishing the update

When all lines are updated and the re-index message is gone, you can finish the update with the button in the menu:

Installation > Database restore > Activate line

Some points to check:

• Readers

• Database couplings

• Client login (remove browser cache)

• Import / Export

• iNVR

• Printing badges/cards

• Intercom

• browser certificate

Camera firmware

Encoder firmware

<p>The post TKH Security Firmware Software Guide first appeared on NVR IPCAMERA SECURITY.</p>

The user may initiate a firmware update on a supported ONVIF device via the Management Client. A right click on a hardware entry in the Recording Servers tree will show a context menu containing the “Update firmware…” item. Upon clicking the item, the “Update firmware” wizard will appear.

Using the wizard, the user can select a firmware image to update the device with. A series of preparatory steps will take place, distributing the file around the VMS, after which the ONVIF driver will be invoked and the firmware upload to the device will begin. The steps are outlined below:

1. Call the StartFirmwareUpgrade command. From the response message, three values are expected:
   1. UploadUri – the URL to which the firmware image will be sent to
   2. UploadDelay – the amount of time to wait before beginning the HTTP POST request
   3. ExpectedDownTime – the duration for which the device expects to be unavailable for after the upload is complete
2. Wait for the duration specified in UploadDelay.
3. Upload the firmware image to the URL specified in UploadUri using an HTTP POST request.
4. The HTTP response code is examined. Unless it’s 200 OK, the driver will report a network error at this point and terminate the update process.
5. Wait for the duration of time specified in ExpectedDownTime, while attempting reconnection to the device every 30 seconds. The reconnection sequence is as follows:
   1. Call the GetServices command. If it succeeds, move to the next step.
   2. Call the GetDeviceInformation command. If it succeeds, report success. If the reported firmware version is unchanged from the one reported when the update procedure began, report a warning instead.
   3. In case of failure in any of the steps, attempt reconnection again in 30 seconds.
6. Perform a final reconnection attempt. If it fails, report a failure, otherwise, report success or warning according to the same rules as specified in 5b.

Milestone Device List

• IP Cameras
•  PTZ
•  Thermal
•  NVR
•  XVR & DVR

 

Models ▼	Image ▼	BNC Inputs ▼	Maximum HDCVI Resolution ▼	Firmware ▼	Individual HDD Capacity ▼	HDD Drives ▼
X51B1E			8		6TB	1
X51A1E		4	5MP		10TB	1
X51A2E		8	5MP		10TB	1
X54A5L		32	5MP		10TB	4
X58A5S		32	5MP		10TB	8
X72A3A		16	8MP		10TB	2
X74A3L		16	8MP		10TB	4
X51A3E		16	5MP		10TB	1
X52A3A		16	5MP		10TB	2
X52A3N		16	5MP		10TB	2
X72A2A		8	8MP		10TB	2

Models ▼	Image ▼	Series ▼	Resolution ▼	Body ▼	Firmware ▼
DH-IPC-PDBW5831N-B360		Multi	2 MP x 4	Panoramic
DH-IPC-PDBW5831N-B360		Multi	2 MP x 4	Panoramic
N22AL12		Lite	2MP	Dome
N45CB5Z		Pro	4MP	Bullet
N25CL5Z		Pro	2MP	Dome
N45CL5Z		Pro	4MP	Dome
N44CL53		Pro	4 MP	Dome
N44CG53		Pro	4 MP	Eyeball
N44CL52		Pro	4 MP	Dome
N25CL5Z		Pro	2MP	Dome
N24CL52		Pro	2 MP	Pro
N45BA5		Pro	4MP	Box
N44BN52		Pro	4 MP	Wedge
N85CM5Z		Pro	8MP	Eyeball
N85CL5Z		Pro	8MP	Dome
N85CB5Z		Pro	8MP	Bullet
N84CG54		Pro	8 MP	Eyeball
N84CL52		Pro	8 MP	Dome
N84CG52		Pro	8 MP	Eyeball
N45CL5Z-B		Pro	4MP	Dome
N44CB33		Pro	4 MP	Bullet
N44CG52		Pro	4 MP	Eyeball
N44CG52-B		Pro	4 MP	Eyeball
N24BN52		Pro	2 MP	Wedge
N24CG52		Pro	2MP	Eyeball
N24CB33		Pro	2 MP	Bullet
N84CL54		Pro	8 MP	Dome
N84CB34		Pro	8 MP	Bullet
DH-IPC-HFW4239TN-ASE		Pro	2 MP	Body
DH-IPC-HDBW4239RN-ASE		Pro	2 MP	Dome
EBW81242N		Ultra	12MP	Fisheye
DH-IPC-HDBW7442H-ZFR		Ultra	4MP	Dome

Models ▼	Image ▼	Resolution ▼	Optical Zoom ▼	Firmware ▼
22204UENI		2MP	4x
8A840WANF		2MP	25x
6CE445XANR		2MP	30x
12203TNI		2MP	3x
1A203TNI		2MP	3x
49225TNI		2MP	25x
50430UNI		4MP	30x
52C430UNI		4MP	30x
59430UNI		4MP	30x
6C430UNI		4MP	30x
6AE530UNI		5MP	30x
6AL245UNI		2MP	45x
59230UNI		2MP	30x
6CE230UNI		2MP	30x

Image ▼	Models ▼	Resolution ▼	Main Firmware ▼
	TPC-BF2221N-B3	2MP
	DH-TPC-BF5401N-B	2MP
	DH-TPC-BF5601N-B	2MP

Models ▼	Image ▼	Channels ▼	Firmware ▼	Individual HDD Capacity▼	HDD Drives ▼
N42B1P		4		8TB	2
N42B2P		8		8TB	2
N42B3P		16		8TB	2
N52A4P		24		10TB	2
N54A4P		24		10TB	4
N52B2P		8		10TB	2
N52B3P		16		10TB	2
N54B3P		16		10TB	4
DHI-NVR6A08-128-4KS2		128		8TB	8
DHI-NVR6A08-32-4KS2		32		8TB	8
DHI-NVR6A08-64-4KS2		64		8TB	8
DHI-NVR4216-16P-I		16		8TB	2

<p>The post New Firmware Milestone 2022 first appeared on NVR IPCAMERA SECURITY.</p>

Camera – Firmware Update using Wisenet Device Manager

Please follow these steps to update the firmware of a camera using Wisenet Device Manager.

To view a video showing the firmware upgrade process, click here.

1.1 Open Wisenet Device Manager from a computer connected to the same network as the camera.
1.2 Click on ‘Search’.

2.1 Select the device
2.2 Click on ‘FW’
2.3 Select ‘FW Upgrade’

3. Click on ‘File Open’

Note: You can also click the ‘Download’ button to have Wisenet Device Manager download the necessary firmware files.

4.1 Browse for the correct Firmware File.  Note that a downloaded firmware file is typically in a ZIP file.  You will need to first unzip the firmware file so that you can locate the .IMG file.
4.2 Click on ‘Open’

5. Click on ‘Upgrade’

6.1 Wait until the Status shows “Success” and the New version of the firmware is displayed.
6.2 Click on ‘Close’ to finish.

Read More : How To Wisenet Firmware Update

All available Firmware by Index

The link will guide you to the Hanwha Techwin America download archive listing current and archived firmware, including older releases.

Link to firmware downloads

	Camera firmware/	01-Oct-2019 11:46	–
	Controller firmware/	29-May-2020 10:34	–
	DVR firmware/	22-Jan-2018 11:09	–
	Decoder firmware/	29-Mar-2021 18:45	–
	Device Manager 2.3.5/	24-Jan-2020 09:14	–
	Encoder firmware/	07-Feb-2020 14:41	–
	NVR firmware/	09-Feb-2022 08:12	–
	Pentabrid firmware/	03-Jan-2020 09:09	–

<p>The post Relase Firmware Hanwha Techwin Wisenet first appeared on NVR IPCAMERA SECURITY.</p>

FIRMWARE

<p>The post New Hikvision Hilook Firmwares 2022 first appeared on NVR IPCAMERA SECURITY.</p>

Description

Follow these instructions to update the firmware on a recorder using a USB storage drive. Be sure to download the appropriate firmware for your device.

Prerequisites

• USB Drive 1GB or more
• The proper firmware file for the device
• Physical access to the recording device
• A computer to load the firmware files onto the USB

Video Instructions

Step by Step Instructions

1. Download Firmware and copy to USB such as a flash drive ➞ Insert USB into recorders USB port.

2. It will prompt for option to upgrade, Click System upgrade ➞ Click Start.

3. Browse for firmware ➞ Open firmware folder is in ➞ Select Bin File ➞ Click Start. Device will reboot once finished.

Update Firmware via LAN(Browser)

This applies to DVR, NVR and IP Cameras.

Please Note : You need to clear previous active-x installs for newly applied updates to show on Web Service in IE Web Browser. To do this, Delete webrec folders from Program files and Program Files(x86) under Windows (C:) drive. Please also reference http://dahuawiki.com/Troubleshoot/Delete_Web_Rec

Description

This enables you to update the firmware of NVR/IPC/HCVR using browser.

Prerequisites

• Computer
• Internet
• Compatible Browser (Internet Explorer)
• NVR/HCVR/IPC

Video Instructions

Step by Step Instructions

Step 1: From IE(Internet Explorer) type in the devices IP address on the IE address bar → login with credentials.

Step2: Setup → System → Upgrade

Step 3: Click on “Browse” → Select correct firmware

• Click on “Upgrade”

• Device will reboot after upgrade is finished.

USB firmware Upgrade via web.

If firmware is on USB Device → Click on browse → Navigate to USB location → Select firmware → Open → Upgrade.

Update Firmware via LAN(ConfigTool)

Description

Use DahuaConfigTool to update firmware using the IP address of the device.

Prerequisites

• ConfigTool Click Here to Download ConfigTool
• Firmware Update File
• A PC or Mac connected to the same network as your device.

Video Instructions

Step by Step Instructions

1. Launch the ConfigTool

2. Click on the device you wish to upgrade, and click, “Login”

3. Input your device’s user name and password, and click, “OK”

4. Click, ‘Upgrade’

5. Click, “OpenFile” and locate the firmware update file.

6. Click, “Upgrade” and wait several minutes for the upgrade to complete.

How To Upgrade Firmware via NVR Cloud Update

Description

Select NVRs now have the capability of updating firmware from the cloud.

When the NVR detects there is a newer firmware in the cloud, a red ‘1’ icon will appear at the System icon.

The entire process takes about 5 minutes depending on network connection.

• 

  Notification of new firmware

• 

  Upgrade menu showing firmware information

• 

  Downloading the firmware file.

• 

  Upgrading the firmware.

Prerequisites

• Device that supports NVR Cloud Update (see list below)
• Internet connection to the device
• P2P Connection Online – How To Setup P2P

Supported Devices

Please reference the table below for what models support NVR Cloud Update and what firmware version(s) they must be at to support the NVR Cloud Update feature:

Video Instructions

Step by Step Instructions

1. Enter the Main Menu

From Live View – Right Click and select Main Menu

2. Click System

3. Click Upgrade

4. Click ‘Manual Check’ and the unit will detect if a newer firmware is available

5. Click Upgrade Now to begin the update process

6. The firmware file will be downloaded

7. After downloading the unit will automatically begin the firmware upgrade

8. The unit will reboot as the final step of the upgrade

Firmwares

<p>The post New Dahua Firmwares 2022 first appeared on NVR IPCAMERA SECURITY.</p>

4K Series

71.X.0.X(MS-N50XX-UH/MS-N70XX-UH/MS-N70XX-UPH/MS-N80XX-UH): http://www.milesight.com/support/download.asp
72.X.0.X(MS-N1009-UNT/MS-N1009-UPT/MS-N50XX-UT/MS-N50XX-UPT): http://www.milesight.com/support/download.asp
73.X.0.X(MS-N1004-UC/MS-N1004-UPC): http://www.milesight.com/support/download.asp

Previous Versions

61.7.0.7-r5(MS-N1009-UT): https://drive.google.com/open?id=0B8u2Oc2-fG-mc0dCR3paYzNKMGs

30.7.0.7(MS-N5009/5016): https://drive.google.com/open?id=0B3OW8hozx4jWT182aXBfMGxGUGs

31.7.0.7(MS-N1004/1008): https://drive.google.com/open?id=0B3OW8hozx4jWd2FhTmk0cWJmNFk

2.7.0.7(MS-N5004/5008): https://drive.google.com/open?id=0B3OW8hozx4jWY3lmOF8takNQWnc

1.7.0.7-r3(MS-N7016/8016/8032): https://drive.google.com/open?id=0B8u2Oc2-fG-md0pwOFJMM3V4X2c

Note:

1) The second number of firmware stands for major version number, while the last two number means the minor version number. Take 71.7.0.5 for example, it means that the NVR’s major version is 7 and it’s minor version is 5.

2) You can use monitor to upgrade your NVR, or you can upgrade it via browser. If click the link to get the upgrade firmware failed, please copy the link to browser and open again.

3) If the firmware of your MS-N1009-UT begins with 61.X.X.X, or the SN begins with 12xxxxxxxxx, then use the 61.X.X.X.

If your MS-M1009-UT firmware begins with 71.X.X.X, or the SN begins with 13xxxxxxxxxx, then use the 72.X.X.X.

2. Steps for Monitor

Step1: Enter upgrade menu by clicking “Main Menu”→“System Settings”→“Upgrade”.

Step2: Search for the device you downloaded in your USB, and select the file.

Step3: Click “Upgrade” button to confirm the upgrade.

Note:

The system will be automatically rebooted after being confirmed upgrade.

3. Steps for WEB

Step1: “Settings”→“System”→“Maintenance”.

Step2: Click “Browse” and find the position where you downloaded.

Note:

Remember to check the model, use the corresponding firmware for your model.

Step3: After choosing the corresponding firmware, click “Upgrade” button to confirm the upgrade.

Note:

The system will be automatically rebooted after being confirmed upgrade.

4. Steps for SmartTools

Step1: Use Milesight Smart Tools to search out this NVR according to its MAC address.

Step2: Click “Browse” and find the position where you downloaded.

Step3: After choosing the corresponding firmware, click “Upgrade” button to confirm the upgrade.

Note:

You can also use Smart Tools to download the latest firmware.

“NVRTools”-“Upgrade”-“FirmwareOnline”

The link for Smart Tools:

http://www.milesight.com/DownloadFile/Software/Smart_Tools/Milesight_Smart Tools_Setup.zip

<p>The post How to Upgrade Firmware for Milesight NVR first appeared on NVR IPCAMERA SECURITY.</p>

	Camera firmware/	01-Oct-2019 11:46	–
	Controller firmware/	29-May-2020 10:34	–
	DVR firmware/	22-Jan-2018 11:09	–
	Decoder firmware/	29-Mar-2021 18:45	–
	Device Manager 2.3.5/	24-Jan-2020 09:14	–
	Encoder firmware/	07-Feb-2020 14:41	–
	NVR firmware/	29-Mar-2021 18:33	–
	Pentabrid firmware/	03-Jan-2020 09:09	–

Link to firmware downloads

Tools Web Based And PC Based

<p>The post Hanwha Techwin All Model Firmware Files DL first appeared on NVR IPCAMERA SECURITY.</p>