xvr password – NVR IPCAMERA SECURITY

Password Reset for Night Owl DVR/NVR

M.Salih ASLAN — Mon, 07 Nov 2022 06:00:55 +0000

Night Owl Protect Password Reset

Password Reset for Night Owl DVR/NVR Don’t remember the password for your Night Owl Protect device? Follow the simple instructions below to quickly and securely reset your device password without having to contact support.

Option 1 – Reset Your Password from the App

NOTE: Ensure the DVR / NVR is powered on and connected to the Internet so it can receive the new password once you change it.

If you forgot your device password and are logged into the DVR / NVR with your Night Owl Protect account credentials, you can easily reset your password from the app. To do so:

Open the Night Owl Protect App on your Smart Device.
Tap “Forgot your password?” on the Sign In screen.
Retrieve the temporary code sent to the email address registered to your Night Owl Protect Account.
Enter the temporary code.
Create a new password and verify it.
Tap “Save Password.”
You can now log into your DVR / NVR with the updated password.

Load More : Top 25 CCTV Software Free

Watch the Short Video Tutorial Below

Option 2 – Reset Your Password Using Our Secure Web Portal

If you do NOT have your DVR / NVR connected to the Internet and do NOT wish to use the app, you can use our secure password reset portal. To do so:

Click “Forgot password” on the DVR / NVR Login screen.
Go to NightOwlSP.com/NOProtect
Create an account or log in.
Register your device if you have not already done so.
Click on “View Details.”
On the Device Details page, click on “Reset Code.”
Follow the provided instructions to reset your password.

Night Owl X App – Password Reset Instructions

The post Password Reset for Night Owl DVR/NVR first appeared on NVR IPCAMERA SECURITY.

Titanium Recorder Password Reset Guide

M.Salih ASLAN — Wed, 24 Aug 2022 19:24:24 +0000

Answer

***Make sure that the system is logged out before trying to do a password reset***

Click on the icon on the lower left hand corner of the screen. Select “Login”

You may answer your security question to unlock the device.
Otherwise, Click on “Dynamic Password”

Please have a person at the recorder provide all the information within the Dynamic Password page. Every piece of information has to be identical (Capital letters for MAC address, colons, spaces, etc.) Once this information is provided to a technician, they will provide a code to enter on the last line. The code provided from the technician is a mix of numbers and all capital letters.

After entering this information, the system will prompt that the password recovery was successful and default the admin password to “123456” or allow you to enter a new one.

Password Resetting, defaulting a TVT IPC using IP Tool

Answer

Open up the IP tool, make sure that the computer is connected to the same network as the camera.

Select the camera and find the MAC address. Enter the MAC address in the password reset area. After entering it and clicking OK, you will have 30 seconds to power down that camera. Once power cycled, the camera will be back to default settings.

The post Titanium Recorder Password Reset Guide first appeared on NVR IPCAMERA SECURITY.

CloudSEE How to reset device password

M.Salih ASLAN — Mon, 27 Jun 2022 20:16:26 +0000

How to reset device password?

Ans:

For resetting the password, we need the error code generate in the device. Send the error code using the form

https://forms.gle/MvHofjk2PXFxdHTB8

The temporary password is randomly generated based on the error code and the validity of the temporary password is just for 3days only. So, please make sure you modify the user account of your device or factory default the device before temporary password expires. Otherwise, the device will generate a different error code after 3days.

IPC CloudSEE2.0

If you are using IPC stand alone, connect the IPC with VMS-6100 and add the device into to software. Then the software will display the error code.

Submit the form with the error code and you will receive temporary login password in your email. Access the web interface of the IPC by input the IP address of the IPC into the web browser address bar. Input the temporary username and password received in your email and login the device. Then go to System then User and modify the current user. Input the new password and save the settings. Or go to Maintenance and click Factory Default button to reset the device.

If you are using IPC with NVR, the error code of the IPC will display on the video preview screen and channel list as well. Submit the form with error code and you will receive temporary login password in your email. Go to Channel list an select the IPC you need to change the password. Click on Input PWD button and input the temporary username and password you received. After you check the Status, the IPC will showing connected. Go to Camera option and click the icon under User column of the desired IPC then modify the password. Or click the icon under Maintenance column of desired IPC and click Factory Default. Once IPC user account modified or factory defaulted, you need to go back to the Channel list and input the new password by clicking Input PWD button if you modify the account. If the IPC is factory defaulted, then remove the existing IPC and search and add it again.

2.IPC CloudSEE1.0

If you are using IPC stand alone, connect the IPC with VMS-6100 and add the device into to software. Then the software will display the error code.

Submit the form with the error code and you will receive temporary login password in your email. Access the web interface of the IPC by input the IP address of the IPC into the web browser address bar. Input the temporary username and password received in your email and login the device. Click on System Config on the top of the main page, the IPC menu will open. (Please make sure you install the Web plugin and enabled the ActiveX controls.) Click System then User Setting. Select the user account from the list and click Modify button. Input the new password and save the settings.

If you are using IPC with NVR, the error code of the IPC will display on the video preview screen and channel list as well. Submit the form with error code and you will receive temporary login password in your email. Right click on the video preview screen and select IP Camera. Select the camera you want to reset the password and click Set IPC. Then input the temporary username and password you received. After you check the Status, the IPC will showing connected. Go back to the video preview screen then right click on the channel you want to reset and then choose Remote Setup. Click User under General menu. Select the user account you want to reset and click Edit button. Then input new username and password. Or click Maintenance under system then click Reset Factory to reset the IPC. Once IPC user account modified or factory defaulted, you need to go back to the Channel list and input the new password by clicking Set IPC button if you modify the account. If the IPC is factory defaulted, then remove the existing IPC and search and add it again.

3.NVR CloudSEE2.0

When you try to login with incorrect password, the NVR GUI will display the error code. Submit the form with the error code and you will receive temporary login password in your email. Login with the temporary username and password then right click on the video preview screen and select Main Menu. Login with username and password. Then click System icon. After that click User option then click the icon under Edit column. Then modify the password. Or Click Maintenance then System, click Reset button to factory default the device.

4.NVR CloudSEE1.0

When you try to login with incorrect password, the NVR GUI will display the error code. Submit the form with the error code and you will receive temporary login password in your email. Login with the temporary username and password then right click on the video preview screen and select System Setup. Click User under General menu. Select the user you need to modify, then click Edit button. Input the new username and password. And save the settings. Or go to Maintenance under System menu. Then click Reset Factory button.

Note: If you do factory default the NVR, you need to configure the entire system again.

The post CloudSEE How to reset device password first appeared on NVR IPCAMERA SECURITY.

How to reset the password of the VIGI camera?

M.Salih ASLAN — Wed, 15 Dec 2021 19:10:18 +0000

If you forget the password of the VIGI camera, you can reset the password via VIGI Security Manager or VIGI NVR.

Method 1: Via VIGI Security Manager

Step 1. Click the Forget Password option.

If the camera is not added, go to Settings > Device > Device List > Discovered Devices, select the device and click the Set Password or + Add > Forget Password.

If the camera has been added, go to Settings > Device > Device List > My Devices > Settings icon of the camera > Basic Information > Device Security > Modify > Forget Password.

Step 2. Send the Verification Code to your Reset Password Email.

If the camera is connected to the internet, click the Send Code and you’ll receive a verification code sent to your Reset Password Email.

If the camera is not connected to the internet, please Download VIGI App in the App Store or Google Play. Scan the QR code with the app and you’ll receive a verification code sent to your Reset Password Email.

Step 3. Enter the verification code and click Next.

Step 4. Enter the new password.

Method 2: Via VIGI NVR

Step 1. Click the Forget Password option.

Right click to open Main Menu, go to Settings > Camera > Device Access > Add Device > Discovered Devices and you will see Forget Password option. If the camera has been added and is not certified, you need to remove the camera first.

Step 2. Send Verification Code to your Reset Password Email.

If the camera is connected to internet, click the Send Code and you’ll receive a verification code sent to your Reset Password Email.
If the camera is not connected to internet, please Download VIGI App in App Store or Google Play. Scan the QR code with the app and you’ll receive a verification code sent to your Reset Password Email.

Step 3. Enter the verification code and click Verify.

Step 4. Enter the new password.

Note:

1. What’s the Reset Password Email?

When you first activate camera, it is asked to enter your Reset Password Email. It is only used to receive the verification code when you need to reset the password.

2. What should I do if I don’t receive the verification code?

Check your junk or spam folder.
Add noreply@tp-link.com in White list (by clicking Create a new filter) in your email setting.
Check your email filter setting in your email account.

If the above steps don’t solve your problem, it’s suggested to contact TP-Link support.

The post How to reset the password of the VIGI camera? first appeared on NVR IPCAMERA SECURITY.

Reolink NVR IPCAM how to reset password methods

M.Salih ASLAN — Wed, 15 Dec 2021 18:50:13 +0000

How to Reset Reolink NVR Recorder’s Password (New UI)

If you forgot your NVR password, you may refer to the following two methods to reset your password.

Method 1. Answer the Security Question

Step 1: Connect the NVR to a monitor by HDMI cable. (If there is no display, please connect it to a VGA monitor and change the pixel to 1920*1080.)

Step 2: Login in the NVR and click Forgot Password button.

Step 3: Click the Answer box to answer the Security questions and click the Go to Reset to factory reset the NVR.

Method 2. Reset the Password by Pressing the Reset Button

Step 1. Reboot your device and make sure you can see the live-view on the monitor screen.

Note: Please stay on live view page through the whole process. Please make sure that the NVR system is on live view page instead of the logging page while pressing the button
Press the USB mouse and make sure that all icons are hidden and the NVR is in live view on the monitor.

Step 2. Remove the outer casing of the NVR using the screwdriver.

Step 3. Press the Reset button for 10 seconds until you hear the buzzing “bee”.

The Reset button of 8-Channel NVR:

The Reset button of 16-Channel NVR:

Step 4. After the Setup Wizard pops out, create a new password and follow the Setup Wizard to complete the setup.

Method 3. Reset the Password via Super Password

If you forget the password of Reolink NVR, you may create a super password via Super Password application, then use it to reset your NVR password and set a new password.

Note: Super Password is only for Windows OS, not for Mac OS.

Here we will guide you to reset the password of your PoE NVR by using the super password in the following steps.

Note: To get the Super Password application package, you can download it from the link below: https://s3.amazonaws.com/reolink-storage/website/download/SuperPassword.exe. If you fail to download it, you can contact support.

Step 1: Connect the NVR to a monitor by HDMI cable. (If there is no display, please connect it to a VGA monitor and change the pixel to 1920*1080.)

Step 2: Login in the NVR and click Forgot Password button.

Then you will get this page:

Step 3: Open Super Password application installed on the computer, then input the random code.

Step 4: Click Create Super Password to create a super password.

Step 5: Go back to the System Login interface on the monitor of NVR. Input the generated super password, then click the OK button.

Note: When you finished the steps above, the password of your NVR will be successfully reset and the old password will be removed.

Step 6: Create a new password for logging in.

Step 7: Start to set up configurations on the Setup Wizard interface.

Step 8: Click Finish button when you set up all the configurations.

Done! You have successfully reset the password of your NVR. Now you can make login with the new password.

How to Change User Password via the Client (New Client)

The following steps describe how to set up Manage User via new Reolink Client. You can also set up Manage User via Reolink App.

Step 1. Launch Reolink Client and log in to your device.

Step 2. Click Device Settings –>System ->User Management, then select the user and click the Change Password button.

Notes：

The admin password can be modified while the name-“admin” can not be changed.
You can also add other common users on Add User interface and modify its’ password or delete the user on this page.

Step 3. Type in the old password (If no password, please leave the password box blank) and set a new password, then click Save.

How to Enable/Disable Password via Reolink WiFi NVR

This article shows you how to enable/disable password via Reolink WiFi NVR.

Step 1. Log in Reolink WiFi NVR with your cameras.

Step 2. Go to the menu page, and click wizard.

Step 3. Click to enable the password that you’ve set.

You don’t need to choose it If you want to disable the password.

Note: After setting to enable the password, you’ll need to log in to the system by inputting the password you’ve set.

The post Reolink NVR IPCAM how to reset password methods first appeared on NVR IPCAMERA SECURITY.

Use Super Password to Reset on Reolink NVR

M.Salih ASLAN — Fri, 19 Nov 2021 18:19:04 +0000

If you forget the password of Reolink NVR, you may create a super password via Super Password application, then use it to reset your NVR password and set a new password.

Note: Super Password is only for Windows OS, not for Mac OS.

Here we will guide you to reset the password of your PoE NVR by using the super password in the following steps.

Step 1: Connect the NVR to a monitor by HDMI cable. (If there is no display, please connect it to a VGA monitor and change the pixel to 1920*1080.)

Step 2: Login in the NVR and click Forgot Password button.

Then you will get this page:

Step 3: Open Super Password application installed on the computer, then input the random code.

Step 4: Click Create Super Password to create a super password.

Step 5: Go back to the System Login interface on the monitor of NVR. Input the generated super password, then click the OK button.

Note: When you finished the steps above, the password of your NVR will be successfully reset and the old password will be removed.

Step 6: Create a new password for logging in.

Step 7: Start to set up configurations on the Setup Wizard interface.

Step 8: Click Finish button when you set up all the configurations.

Done! You have successfully reset the password of your NVR. Now you can make login with the new password.

How to Reset Reolink NVR Recorder’s Password

If you forgot your NVR password, you may refer to the following two methods to reset your password.

Method 1. Reset the Password by Pressing the Reset Button

Step 1. Reboot your device and make sure you can see the live-view on the monitor screen.

Note: Please stay on live view page through the whole process. Please make sure the nvr system on live view page instead of the logging page while pressing the button
Press the usb mouse and make sure all icons hidden and nvr in live view on the monitor.

Step 2. Remove the outer casing of the NVR using the screwdriver.

Step 3. Press the Reset button for 10 seconds until you hear the buzzing “bee”.

The Reset button of WiFi NVR:

The Reset button of 8-Channel NVR:

The Reset button of 16-Channel NVR:

Step 4. After the Setup Wizard pops out, create a new password and follow the Setup Wizard to complete the setup.

The post Use Super Password to Reset on Reolink NVR first appeared on NVR IPCAMERA SECURITY.

How to Reset the Password of Annke Hikvision POE Cameras?

M.Salih ASLAN — Mon, 01 Nov 2021 18:37:37 +0000

After you reset the password of Annke NVR or add a new POE camera to the Annke NVR, you may find the cameras cannot show images.
Because: For the camera to work properly, the password of the cameras should also be reset.

Below are the steps to reset the cameras’ password.

Video Guide:

Part #1: Export the file in ‘.XML’ format and send it to ANNKE support

Part #2: Import the file (also .XML format) received from ANNKE support

Text Guide:

1. Download and install a software SADPTool on your Windows computer. Here is the download link: For

For Windows: https://download.annke.com/CMS/SADP_v3.0.2.4.zip

For Mac: https://download.annke.com/document/Computer_Software/SADPTool.pkg.zip

2. Connect your computer to one of the POE ports (i.e. the camera port) on your NVR.

3. Run the software SADPTool and it will detect the camera‘s IP.

4. Select the camera‘s IP and click forget password at the right bottom of the software.

5. Click “Export” and select the path to export an XML file. Please export the file of each of your nonworking cameras.

7. Send us the XML file and we will give you another key file to continue the password reset.

NOTICE:
1. Please do NOT turn off your NVR and the SADP software after you exported the files. Otherwise, the exported file will be invalid immediately.
2. Please use the key file from us as soon as possible because it’s only valid for 24 hours.

8. Select “Import” and choose the file we sent to you.
Input your NVR’s password as the new password and confirm the password of the camera. Click “Confirm” to finish reset.

NOTICE:
Please follow the matching guide in our email to import the XML file to the cameras accordingly.
(For example, we will say “xxxxxx.xml” for “xxxxxx.xml”)

After resetting the cameras successfully, please turn off your NVR, wait for about 10 seconds, then turn on the NVR again.

The post How to Reset the Password of Annke Hikvision POE Cameras? first appeared on NVR IPCAMERA SECURITY.

XMEYE Devices Password Reset New Method

M.Salih ASLAN — Sun, 13 Jun 2021 19:51:20 +0000

XMeye – What to Do If You Forgot The Admin Password of The System?

For this system, there will be some optional way to reset the password, please kindly find which way is suitable for you.

Here are the methods to reset the password.

1. Please contact technical support to get the general super password according to the system date displayed on your monitor.

2. Can you see a “?” on the login page,? If yes, please refer to this link to find the key number and send it to technical support, and then please don’t turn off your DVR.
After technical support gets your code, the agent will generate a super password for you.

3. Can you see a small QR code after you input the wrong password 5 times? If yes, please click it and make it enlarge, and then please send the full and clear picture of this QR code to the technical support. After the technical support gets your picture, the agent will generate a super password for you.

4. If the above method all not suitable for your case, please kindly note that can you see some prompt message on your login page, such as
“System maintenance, please contact the installer, SN: XXXXXXXX“. If it is in this case, please kindly send us a clear picture of this prompt message window, and then please inform us of the system date displayed on your monitor. After we get your pictures, we will inform you how to do it for the next step.

XMeye – How to Change the System’s Password?

The system’s default password is blank(nothing). We suggest you change the system‘s default password when you hook up the system for the first time to protect your privacy. Below are instructions on how to change the password.

Here are the steps:

1. Use the system’s user name admin and default password blank to log in system.

2. Right click mouse and select the Main Menu

3. Go to advanced

4. Go to Account

4. select admin and click Modify Pwd

5. Input the new password and confirm it. Since the old password is the default password which is blank, leave the old password box blank.

Click OK to save.

XMeye – How to Use Security Questions to Reset Your System’s Password?

Steps:

1. Please go to this login interface and tick the ‘?’ option.

2. You will see these are two Security Questions like the picture below shows. And please input the Answers and then tick OK.

3. Then the system will automatically pop up this interface like the picture below shows. You can input the new password that you want to set up.

4. Then, there is a message shows Modify Password Successfully.

The post XMEYE Devices Password Reset New Method first appeared on NVR IPCAMERA SECURITY.

Hikvision password reset using SADP tool video

M.Salih ASLAN — Mon, 31 May 2021 12:12:42 +0000

How to reset hikvision dvr password, admin account locked, how to retrieve hikvision dvr password Get your Region Support Email ID: https://www.hikvision.com/europe/abou…

The post Hikvision password reset using SADP tool video first appeared on NVR IPCAMERA SECURITY.

Lorex – How to reset the password DVR NVR All Model

M.Salih ASLAN — Sat, 15 May 2021 09:50:42 +0000

At Lorex, we take your security seriously. As such, we do not give our customers the option to reset the recorder on their own. If you forget the password of your recorder, you will have to call our Technical Support and request for a temporary password, so you can reset your password.

This article applies to all older models of recorders and the following new recorders: N841, N842, N843, N861.

Part 1 – Call our Technical Support

Step 1. Locate and retrieve your recorder’s Device ID. In most cases, the Device ID is printed on a label on the top or side panel of the recorder along with the QR Code (see image below) NOTE: The Device ID is NOT the Serial Number.

TIP: There are three ways of retrieving your recorder’s Device ID or QR Code:

As mentioned above, you can locate the Device ID on a label on the top or side panel of the recorder.
You can also see Device ID by going to your recorder’s app (i.e., go to Settings > Device Info).
Finally, using a monitor and a mouse, you can retrieve the Device ID by accessing the Info Page of your recorder (i.e., right-click on mouse, then click Info (see image below).

Step 2. Once you have the Device ID at hand, call our Technical Support at 1-888-425-6739 and ask for a temporary password so you can access your recorder and reset the password.

Part 2 – Log in to your recorder using the temporary password

NOTE: For this procedure, you must (1) connect a monitor to your recorder using an HDMI cable, and (2) connect a mouse to one of the USB ports of your recorder.

Step 1. Right-click on the mouse, then click Main Menu.

Step 2. Now, log in to your recorder to open the Main Menu (see image below). You will need to provide the following credentials:

Username: admin (default)
Password: Use the temporary password provided to you by the Technical Support

Click OK to proceed.

Step 3. On the Main Menu, click Settings (see arrow on the image below) > System > Account > User.

Step 4. In the User Settings, click Modify.

Step 5. Then, configure the following settings:

User: admin (default)
Modify Password: Check the box
Old Password: Enter the temporary password provided to you by the Technical Support
New Password: Enter your new password
Confirm Password: Re-enter your new password

At the bottom of the screen, click OK to save your changes.

NOTE: Now, make sure to keep your new password in a safe place for future use.

Congratulations! You have successfully reset your password.

The post Lorex – How to reset the password DVR NVR All Model first appeared on NVR IPCAMERA SECURITY.