How to setup camera by WiFi QR Connect

Before starting setup

Make sure of the followings:

– Your router supports the 2.4GHz frequency band (802.11b/g/n). Some models don’t support 5G WiFi.

– Your smartphone has connected to Wi-Fi that the camera will connect with.

– Your router’s DHCP is enabled. Before starting setup Android iOS Step3. Add the camera to network

– For Videos of how to setup IP Cameras please visit Website: https://www.youtube.com/embed/r1rg0Qix1_Q

Load More :

• V380 IP Camera Installation Manual
• Wyze Cam Outdoor Setup Guide NEW

Step1. SriHome App Installation

Method 1: Search“SriHome”on Google Play or iOS App Store.

Method 1: Scan the QR code to download “SriHome” App.

Step2. Create account & Login on SriHome App

Step3. Add the camera to network

1. Power on the camera

Camera will make continuous ‘beep’ sounds after 30 seconds.

Note: If no ‘beep’ sound, keep pressing the “Reset” button for 5 seconds until you hear a ‘clash’ sound.

2. Add the device on the App

When you hear the continuous ‘beep’ sounds, enter SriHome App and do as follows:

Trouble shooting:

– If you fail to add device on App, please make sure of the followings:

1. Before adding device, you can hear continuous ‘beep’ sounds from the device. (If there is no sounds, RESET device)

2. Enter correct Wi-Fi password.

3. When you hear ‘Bi’ sound from device, click ‘Next’ in step 1-3.

– If you fail to setup your device via WiFi QR Connect for many times, you can try to setup camera via WiFi Hotspot Connect.

How to setup camera by WiFi hotspot

Before starting setup

Make sure of the followings:

• Mount the antenna and make it vertical.

• All IP Camera support 2.4G HZ WIFI，only some IP cameras don’t support 5GHZ Wi-Fi.

• The router has enabled DHCP to obtain IP address automatically.

• Your smartphone, camera, and router should be within about 8 feet during setup.

Video operation： https://youtu.be/u7r5e_D0X1E

Connect & Add Camera

1). Connect your Phone to the camera’s WiFi Hotspot

Power on the camera, then press and hold the RESET button for 3-5 seconds to restore factory

settings. After one minute, the camera will generate a WiFi Hotspot:

Camera’s WiFi SSID: IPC_******, WiFi Password: 12345678

2). Go to the phone’s Wireless & Networks settings, and connect your phone to the camera’s WiFi Hotspot.

Note: When the Phone tips: “The current WLAN network cannot access the Internet. Switch to

another network?” Please select “Cancel”.

Add the camera on App

1). Run “SriHome” APP, Tap “+” button.

2). Input the camera ID: “A00*******” (Auto or manually)

3). Input the name of device: Give your camera a name e.g. home, office…….

4). Input the device password: Default password is 888888

5). Tap “Next” button to set wireless network (as figure3-6 to 3-9).

6). When added successfully, the camera will show on the Devices List.

Unplug the camera from power, then relocate the camera to anywhere within range of the WiFi network that you connected the camera to.

The system does not detect an SD Card

Followings are a few possible reasons why this may be occurring:

1. Please power off camera before inserting SD card into camera.

2. The SD card read&write speed not good, please use a SD card with class 10 or above class 10.

3. The SD card is broken.

4. The SD card has not been formatted properly.  please format sd www.sricam.com/srihome/download

5. The SD card slot is malfunctioning.

APP prompt “offline” when adding camera

See “camera offline” when  the setup procedure

Here are questions which may help you to shoot the issue when you use an Ethernet cable to connect the IPcam to the router:

1. Make sure the Green LED on the cable connector is flashing . If not, the connect between the camera and the router is still off.

Double check to ensure both two ends securely connected. You can also try other ports which on the router.

2. Make sure your mobile phone connect to same router or same LAN as the camera cable connecting.

3. Make sure DHCP is enabled on your router.

4. Make sure NO MAC filter enabled on your router. Or you need to disable MAC filter temporiaily before successfully configure camera.

5. When you switch from Ethernet to WIFI on the app, it will ask for WiFi password, make sure the provided WiFi password is correct.

Camera’s Wi-Fi is unstable and often offline

Followings are a few possible reasons why this may be occurring:

1. Check whether antenna is tightened.

2. To check Wi-Fi signal, in normally, it should be more than 3 bars.

(The distance between the camera and wifi router being too far might cause wifi signal to be less than 3 bars ).

3. WiFi channels: check if WiFi channels are busy, possibly reconfigure to “Automatic”.

4. The camera IP address conflicts with other devices, needing to set camera IP address to be a

fixed one.

5. Change the name of the wireless network (SSID): If there are different wireless networks with the same name (SSID) in your

environment-perhaps because a neighbor uses the same wireless router,a wireless repeater has the same name as the router – WLAN

devices could try to automatically connect to the wrong wireless network ,Therefore, set up a unique wireless network name in your

wireless router or repeater.

6. Set maximum transmission power:In some wireless routers, the transmission power can be reduced,which reduces the performance

of the wireless network. Make sure your wireless router has the maximum transmit power set.

How to delete the camera from the App

1. Open the SriHome app, and click

2. Click “Remove Device” to delete the camera from the App.

How to adjust camera’s time？

Step 1. Login SriHome APP on your smart phone and go to settings>>>>>time settings as figure 1 and figure 2.

Step2. Select your local UTC, then click “Next”, as figure 3 and figure 4.

Can’t connect WiFi

If you fail to setting WiFi for ip camera, please make sure your router：

1. All IP Cameras support 2.4G HZ WIFI，only some IP cameras don’t support 5GHZ Wi-Fi.

2. NO MAC filter enabled on your router. Or you need to disable MAC filter temporarily before successfully configuring camera.

3. Router’s DHCP is enabled, after setting up and setting a fixed ip address for IP camera, you can disable DHCP again.

4. The WiFi Encryption is WPA/WPA2-PSK, either AES or TKIP encryption is OK if you are not using WPA/WPA2.

There is possible using WEP. It is recommended to use WPA/WPA2 now because WEP is quite old technology and not safe nowadays.

5. WiFi Channel needs to set as AUTO in order to avoid busy channels.

Inconsistent signal, it could be due to:

1) Too many devices sharing the same internet network. Please try to disconnect other devices.

2) The IP camera is too far from the router if using WIFI connection.

• Other quality and setup issue, please reset camera to factory default.

Camera ID, Camera Password, App Account ID and  Password

Camera ID

The camera ID is the unique identification of each camera. The camera ID can be found on the label which is attached to the camera.

Camera Password

The default password of camera is 888888. During the setup procedure, you can change the password for security. The Camera

Password is saved into the camera. The Camera ID and Camera Password is the only credential to access the camera.

Memorize the Camera Password because you need to use it when you try to access the camera from multiple devices.

In case you forget the Camera Password, you can do nothing but re-set up your camera.

If you forget the password, you can reset the cameras and then create a new password.

App Account ID and Password

When login SriHome App , you need to create a App Account ID and Password. The App account ID is unique identification of

each user account. For security, one user can only access the camera from one device. Therefore, the previous login will be force

quit (on iOS) when log in from the second device with same User Name. If you want to access the camera on multiple devices

simultaneously, multiple App account ID will be needed.

How to restore the camera to factory settings?

Step 1: Power on the IP Camera and wait for about 30 seconds

Step 2: Keep pressing the RESET button for about 15 seconds then release.

Then camera successfully restore to factory settings  (password default : 888888).

SriHome App download

Method 1: Search for “SriHome” on Google Play or iOS App Store.

Method 2：Scan the QR code to download “SriHome” App.

 Download the video to the phone and view it (Apple isn’t supported )

1. Download the video to the phone

2. View the path

Note：

1 The firmware version of camera is above V8.1.1 .

2 The camera and mobile phone are on the same LAN .

3 SP027 models do not support this function .

How to solve the problem that the upgraded camera cannot be turned on?

1. Please copy the entire decompressed update folder to the root directory of the SD card, the file cannot be renamed; (please contact customer service for the updated folder)

2. Then install the SD into the camera, and then power on the camera;

3. After waiting for 2 minutes for the camera to rotate and self-check, press the reset button to reset the camera to complete the upgrade process.

Notice:

1. Please ensure that the camera cannot be powered off during the upgrade process

2. If the upgrade fails, the camera will automatically restart, no need to unplug the power supply

3. If there is an unexpected power failure during the upgrade process, please contact customer service with email: support@sricam.com

How to reset the password of the SriHome APP account

1. Click forgot password

2. Enter your email account

3. Click to get verification code

4. Enter the verification code received by your email

5. Set a new password

6. Click Next

Note: The new password must be a combination of 8-20 digits and letters.

How to share camera to other users

To protect user’s privacy, the first user is an administrator by default. Other users accessing the camera need the administrator’s

authorization, or they cannot access even with camera ID and password.

The way to get permission is as follows:

Step 1：Log in “SriHome” App, tap Settings -> Visitors Management -> Add.

There are 2 types of permissions:

Operator: Watch live video, set time,video, alarm, records and so on.

Visitor: Only watch live video

You can find the user’s App ID as figure 2-2 Menu.

Step 2: The share adds a device

After the administrator is authorized as a visitor or operator, you need to add equipment by yourself.

Note: There is no requirement for the operation sequence of step 1 and step 2. You can also operate step two first and then perform the operation of step one.

( Video guide for share user : https://youtu.be/dOkhgOBsYqY)

How to setup microSD  card record settings

SD card installation video：https://www.youtube.com/embed/nbpofPlUV2k

Note: Cameras maximum support 128 GB SD card.

1). Remove power cable before inserting the microSD card to the camera.

2). MicroSD card format and record setting

Log in “SriHome” App and follow the steps:Settings -> Record Setting .

There are 2 types of recordings：

24/7 recording: 24/7 recording refers to the continuous recording of the camera which is about every 10 minutes as a node continuous recording.

Alarm recording: The camera captures footage only when the motion detection alarm is activated.

The system does not detect SD Card.

Followings are a few possible reasons why this may be occurring:

1. Please power off camera before inserting SD card into camera.

2. The SD card read&write speed not good, please use a SD card with class 10 or above class 10.

4. The SD card is broken.

3. The SD card has not been formatted properly.

5. The SD card slot is malfunctioning

SD card video playback view:

Note:Both 24/7 recording and Alarm recording cannot be opened at the same time ,only one of them can be opened.

How to Setup Motion Detection Alarm

Step1: Enable motion detection alarm

Note: The alarm notification will be pushed just ONE time within 30 seconds

Step1-1: Tap “Setting” button >> “Settings” >> “Alarm settings” be the alarm setting window as figure 1 and figure 2.

Sensitivity: The greater the number, the higher the sensitivity, the camera will be more easily alarmed.

Step1-2: Enable “Motion Detection Alarm”as figure 2

Note: Set mobile push notification as follows

Android

iOS

How to watch live streams on ONVIF Clients

1.Introduction

In order to use ONVIF clients the following requirements need to be met:

►Your computer (or mobile device) and the camera access to the same LAN.

►Your camera has been successfully set up.

► rtsp://your camera IP:554/1/h264major or rtsp://your camera IP:8554/profile0

2. iSpy for Microsoft Windows

Step 1: Download the application ( http://www.ispyconnect.com/)

Step 2: Unzip the downloaded package and click the unzipped iSpySet to install.

Step 3: Open iSpy. An welcome window will pop up. Click Ok to continue.

Step 4: To add the camera go to Add > ONVIF Camera.

Step 5: In the popup window, select the “FFMPEG(H264)” ，

type in  “rtsp://your camera IP:554/1/h264major or rtsp://your camera IP:8554/profile0”, select RTSP Mode : TCP ,then click  “OK”.

Step 6: In the popup window，click“ Finish”.  

Step 7: You can watch the live steam. If you have already added more than one camera into the camera list, all the

live streams can be displayed in the same time by overlapped windows.

Step 8: offers functions (and configurations) such as alarm, FTP, SMTP, Snapshot, etc,. Play with them by clicking

right button and select Edit in the popup menu.

Locally record files

iSpy allows you to locally record videos in MP4 format.

Step 1: Press Record All button at the lower right corner. After finish recording press the Stop Record button.

Then the saved file will be displayed at the bottom of the current window. Right click the video and click the Save to

button to your local machine.

How to change my camera’s password

Our camera password is saved in the camera. The SriHome app also has an account password. Don’t get confused. These

two passwords play different roles, and they work together to ensure only legislate user can access.

You can change password by tapping Settings > Security Setting.

Enter the original password of the camera,and then enter the new password.If you forget the camera password,you can press the reset button

for about 3-5 seconds to restore the camera to its factory setting(factory default password 888888)

How to find the user’s App ID

Tap   icon to find it. As figure 1 and figure 2.

How to set the privacy zone

1. Open the SriHome APP, click the settings button, and then click “Video Settings”

2. Click “▼”, select “Area 1”, and then randomly select an area on the video screen of this interface, and then click “Save”.

3. Back to the video viewing interface, you can see the privacy area just set

Note: If you need to clear the privacy area, go back to the video settings and click “Clear Current Area” or “Clear All Areas” to cancel the privacy area (a total of 4 privacy areas can be set)

 How to change App password

Step 1. Running sriHome App, then tap “ Sign Out” as figure 1.

Step 2. Tap “Forgot password” icon as figure 2, After that, you can change App password.

Multiple-view on srihome App

Step 1 ：Tap the “multiple view” icon as Figure 1.

Step 2 ：On the pop up windows select the camera which you want to multiple view as figure 2.

Step 3 ：Tap “Next”to pop up multiple view.

Note:In multi-scree mode, you can watch up to 4 devices at the same time(except NVR).

 How to adjust the sensitivity of motion detection

You can adjust the sensitivity of motion detection on SriHome mobile App.

Login SriHome App, tap Setting button >> “Settings” >> “Alarm setting”

The higher digit the sensitivity, the camera will be more easily alarmed.  “100” is the maximum sensitivity.

How to change the resolution of recording

Open Settings>Open Recording Settings>Click Recording>Select HD Recording Type

<p>The post Sricam installation and user guide first appeared on NVR IPCAMERA SECURITY.</p>

In general, a power cycle of a Wyze camera can frequently resolve most problems; this is a method that is quite simple to use and works most of the time to bring Wyze devices back to work.

Why would You Power Cycle Your Wyze Camera?

There are several reasons why you should power cycle your Wyze camera. One possibility is that your commands are not being recognized by the camera. Another possibility is that the image quality is poor or that the camera is unable to connect to your Wi-Fi network. In rare circumstances, a power cycle may also alleviate difficulties with motion sensing or alarms.

How to Power Cycle Wyze Camera?

Simply unplug the power from the camera after turning it off and streamline the power connections after a few seconds. This will reboot the unit, and you will have to wait a few moments for the base station to connect to the Wyze camera. So, if you’re experiencing small issues and don’t know how to power cycle the Wyze Camera.

Note: The power cycle technique is rather straightforward despite of Wyze model or whether it is outside or inside the camera.

Simply follow these steps:

1. Unplug your WYZE device from its power source. Either from the switchboard or the camera side, both ways work.
2. Give yourself at least 10-15 seconds to let the camera completely discharge itself.
3. Plug the device back into the power source and let it restart.

How to power cycle the WYZE outdoor camera?

Simply follow this procedure:

1. Unplug your WYZE outdoor Cam from the hook.
2. Remove the batteries, wait for at least 2 minutes, and insert them back again.
3. Now again wait for at least 15 secs, and now turn it ON.

Done

How to power cycle the WYZE camera remotely?

To remotely power cycle your WYZE camera:

1. Go to the WYZE App (IOS) (Android), and select your WYZE camera from the list.
2. Power it OFF.
3. Better power off the main switch (if it is remotely controllable.) If not, skip this added caution.
4. Wait for at least 15 minutes and then restart it.
5. It should be reset as expected..

If the camera becomes fully hung up, a remote restart will never work.

You may want to install a smart switch between the camera power adapter and the socket to fix this problem. It will not be more than $10. However, if the local Wi-Fi signals are absent or poor, the problem will remain.

How do you power cycle a WYZE Cam V2?

Power cycling WYZE Cam V2 is no different from doing so with any other WYZE camera. Nevertheless, if you have power cycled it again and again, and you still can’t connect to your WYZE Cam V2, you will need to Hard Reset it.

You can find an easy way of Hard Resetting under V3 factory resetting. (Same process)

How do you power cycle a WYZE Cam V3?

1. Power cycle the camera by unplugging the power and plugging it back in.
2. If the camera returns to flashing red but never reconnects, set the camera up as a new device.
3. In the Wyze app (IOS) (Android) , tap Home then the + plus sign. Then tap Add Device > Cameras and select your camera. Follow the prompts to set up your camera again.

You will need to Hard Reset it in case the problem still persists:

To factory/Hard reset your Wyze Cam v3:

1. If you have a MicroSD card inserted, remove it.
2. With the Wyze Cam plugged into power, press and hold the setup button on the bottom of the camera for 10 seconds. This will reset the camera.
3. Wait at least 30 seconds for the unit to initiate.

This process can take up to 5 minutes. It’s rare, but it’s possible.

1. The LED status light on the device will change from Solid Red to Flashing Red.
2. The device is now ready to be set up again.

Check out the Wyze Cam Setup Guide to set up your Wyze Cam.

What Should You Do If the Camera Doesn’t Connect even after the power cycle of the Device?

There are a few troubleshooting steps you can go through:

• Step 1: Reboot your Wyze Base station by disconnecting it for 30 seconds from its power supply.
• Step 2: Check the Wyze Cam Outdoor and Base Station status lights. They should both be solid blue, but if they’re flashing, it means they’re still trying to connect.
• Step 3: Launch the Wyze app and choose the connected Base Station. If the signal strength is merely one bar, move your Base Station closer.
• Step 4: Charge the Wyze Camera for four hours outside. You may use the mobile app to check battery levels whenever you need to.
• Step 5: Open the Wyze app (IOS) (Android) and navigate to Account > Firmware > Upgrade, then hit Update. The correct software can guarantee that the devices communicate.

Why is my WYZE Cam not connecting after the above methods?

WYZE Issue Code 90 is a “common” error that might occur at any moment. However, in 97% of the cases, the offenders are as follows:

• If there is a connection problem and repeated time-outs during setup, the Wi-Fi frequency might be the culprit. Most Wi-Fi routers today support both 2.4GHz and 5GHz frequencies. As a result, you should ensure that you are connected to the 4 GHz WI-Fi network.
• WYZE Error Code 90 is also caused by slow internet connections or connections that are more limited than usual.
• Check that no significant equipment is interfering with the WYZE camera’s access to signals; otherwise, an error path may be paved.
• Corrosion and day-to-day difficulties can also occur and can be remedied by disconnecting the wires/sockets, etc. and inserting them back in. In general, you can simply overcome these annoying situations using simple ways.
• If the Wi-Fi channels get too congested, they may wind up over-consuming the minimum bandwidth required by the WYZE Cam, resulting in the WYZE Error Code 90.
• SD Card might possibly be the culprit! If the inserted SD card is corrupted, WYZE Error Code 90 will most likely appear. The reason is that SD card corruption interferes with the back processing of the camera’s live broadcasting. It sometimes entirely stops it.

Solutions Of How to Power Cycle Wyze Camera Error Code 90

If your WYZE Cam is not connecting, it may be due to a power issue. First, try power cycling the camera to see if that resolves the issue.

To power cycle your WYZE Cam:

• Unplug the power adapter from the camera.
• Wait 10 seconds.
• Plug the power adapter back into the camera.
• Wait for the green light on the front of the camera to come on, indicating that it is powered on.
• Once the green light is on, open the WYZE app (IOS) (Android) and check to see if you can view your camera’s live footage.

If the problem is not resolved then you might need to see other solutions and apply it accordingly:

1. Unburden the Wi-Fi Channel
2. Change the Wi-Fi Frequency Band
3. Establish New Wi-Fi Access Points

Unburden the Wi-Fi Channel

1. First, on your Android or Apple phone, install the Wi-Fi Analyzer App.
2. Check to check whether any Wi-Fi channels are saturated with this app.
3. You will now require a Windows PC. Switch it on.
4. When you press “Windows + R,” the Run Prompt window will appear.
5. Enter “cmd” and press “Enter.”
6. Now, type “IP config” into the command prompt and hit “Enter.”
7. Note the IP address under the “Default Gateway” header.
8. Put this IP address into the search box of any web browser.
9. You are now on the router’s Control Panel log-in page.
10. Enter the username (often “Admin”) and password (if not previously established, the code written on the back of the router).
11. Now that you’ve signed into your router, go to Wireless Settings and pick “Channel.”
12. Many channels will emerge with designations such as “1,2,3,…”
13. Using the Wi-Fi Analyzer App, choose the least saturated (least-burdened) channel from the list.
14. WYZE Error Code 90 should be resolved by changing the Wi-Fi Transmission channel.

Change the Wi-Fi Frequency Band

1. Open your web browser and type in the address bar 192.168.1.1
2. Log in with the username and password for your router (If you don’t know what they are, check the documentation that came with your router)
3. Click on the “Wireless” tab and then select the “2.4GHz” radio frequency band instead of the “5GHz” band
4. Save your changes and restart your route

Establish New Wi-Fi Access Points

If you are still unable to connect to your Wyze Cam after attempting the above-mentioned alternatives, you may need to create new Wi-Fi access points. To accomplish this:

1. Open a web browser on your PC and navigate to 192.168.1.1.
2. Enter “admin” as the login and “wyzeCam” as the password.
3. To add a new Wi-Fi access point, go to the WLAN tab and then click Add.
4. Enter a name for your new Wi-Fi access point in the Name field (e.g., Wyze Cam)
5. Enter the name of your home Wi-Fi network in the SSID field (e.g., MyHomeWiFi)
6. Enter the password for your home Wi-Fi network in the Password area.
7. Click on Save, then on Apply Changes.

You Might Want to see this:

• Wyze Cam Outdoor Setup Guide NEW
• Wyze Cam v3 Setup Guide NEW
• Wyze Firmware App Tools New

Frequently Asked Questions:

How Do I Restart Wyze Camera?

• Option One: Unplug the camera from the power source for 10 seconds, then reconnect it.
• Option number two: For 5 seconds, press and hold the power button on the back of the camera until the LED light flashes blue.
• Option three: Install the Wyze app and go to the “Device Settings” section. Tap “Restart” next to the name of your camera, then confirm by tapping “Yes.”
• Option four: If your camera is stuck and you are unable to reach Device Settings, you may factory reset it through the Wyze app. To begin, navigate to Menu > Account > My Cameras. After that, choose the camera you want to factory reset, then hit the gear icon in the upper right corner and choose “Factory Reset.”

Can you power cycle Wyze camera remotely?

Yes, you can by going to the WYZE App (IOS) (Android), selecting your WYZE camera from the list, powering it OFF and Waiting for at least 15 minutes, and then restart it.

Why is my Wyze device reset failed?

If the connection continues to fail, restart your phone or tablet and then erase the Wyze app’s cache. If the preceding troubleshooting options have failed, consider restarting the camera by going to the camera’s settings and selecting “Restart Device.”

<p>The post How to Power Cycle Wyze Camera Full Guide first appeared on NVR IPCAMERA SECURITY.</p>

To set up your Wyze Cam Outdoor:

1. In the Wyze app, tap Home, then tap + plus sign on the top left.
2. Tap Add Device.
3. Tap Cameras > Wyze Cam Outdoor > Begin setup.
   • If you don’t have a Wyze Base Station on your account, or your Base Station already has 4 paired cameras, you’ll be directed to set up a Base Station here.
4. On the back of your camera, open the charging cover and flip the power switch to On.
   
   
   • The status light will be solid yellow.
5. Lift the camera away from its base, or separate the magnetic base from the body.
6. In the Wyze app, tap Begin Setup.
   • If you have more than one Wyze Base Station, or yours is already full, you’ll be prompted to select the one you’d like to pair the camera with.
7. Press the SYNC button on the bottom of the Wyze Cam Outdoor.
8. The camera will say “Pairing is in progress. Please wait.”
   • The status light will flash yellow and blue.
9. The camera will automatically finish pairing with the Wyze Base Station.
   • The status light will turn solid blue when complete.
10. When prompted on the next screen, name your Wyze Cam Outdoor. You’re all set!

Once your Wyze Cam Outdoor is set up successfully, you can mount it. Continue to the Wyze Cam Outdoor Mounting Guide.

Having issues setting up your Wyze Cam Outdoor? Check out our Wyze Cam Outdoor setup troubleshooting guide.

Wyze Base Station Setup Guide

<p>The post Wyze Cam Outdoor Setup Guide NEW first appeared on NVR IPCAMERA SECURITY.</p>

Wyze Cam Outdoor v2 includes all the features you love from the previous outdoor cam, with the addition of a Starlight sensor for Color Night Vision, a bigger Field of View of 130º, and an improved PIR lens for fewer false detections.

Wyze Base Station Setup Guide

<p>The post Wyze Cam Outdoor review and installation guide first appeared on NVR IPCAMERA SECURITY.</p>

The best. Now better.

It’s time to take Wyze Cam outside. All-new IP65 weather & dust resistance, and the Starlight sensor, truly lets you see everything around your home, inside and out, daytime and night.

Wyze Cam v3 features we’re excited about:

• Indoor / outdoor. IP65 weather resistance lets you capture moments from virtually anywhere.
• CMOS Starlight sensor. Reduces noise from low light, sees in environments up to 25x darker.
• Versatile mounting. Magnetic, screw, and 1/4 tripod mounting.
• Great image quality, day and night. 1080p Full HD.
• Adaptive IR lights: Invisible and visible IR lights.
• Color Night Vision. See clearly and in color at night in low light conditions.
• NEW! Accessories available. Outdoor adapter, Spotlight kit, Floodlight kit (TBD), and more.
• Siren. Deter bad actors with loud alarm you can trigger from the Wyze app.
• Cam Plus available. Provides Person, Pet, Vehicle, and Package detection.

Wyze Cam v3 Tech Specs

Before you begin setup:

1. Download the Wyze app on your smartphone or tablet.
2. Connect your device to a 2.4GHz WiFi network.
3. Unpack your Wyze Cam v3 box, removing all plastic and packing materials.
4. Plug the camera into power using the included USB cable and power adapter.
   • The camera’s status light will turn solid red when powered. When flashing, it’s ready for setup.

To set up your Wyze Cam v3:

1. In the Wyze app, tap Home, then tap + plus sign on the top left.
2. Tap Add Device.
3. Tap Cameras > Wyze Cam v3.
4. With your camera plugged into an outlet, tap Next in the app.
5. Pull the base from your camera and single-press SETUP under the camera. It will say “Ready to connect”
6. In the app, check the box next to “I heard, “Ready to connect”.”
7. Tap Next.
8. Select your 2.4GHz WiFi network and enter your network password. Tap Next.
   • Tap the icon in the password field to display the password to ensure it was entered correctly.
9. Scan the QR code on the Wyze app.
   • Hold your camera up to your phone screen with the QR code displaying. It will say “QR code scanned please wait.” then “Setup completed.”
10. In the app, check the box next to “I heard, “QR code scanned”.”
11. Tap Next. You’re set up, it’s time to name your device.
12. Name your Wyze Cam v3 using the text field, or by choosing a suggestion.
13. Tap Finish when done.
14. If you want to share your device, tap Share Device.
    • If not, tap Maybe later.

Additional Notes:

• Wyze devices only work on 2.4GHz WiFi networks. If you are connected to a 5GHz network, switch to a 2.4GHz network before setting up your device.
• Having trouble scanning your QR code? A few tips to help:
  
  • Hold your camera 6-10 inches away from your phone screen.
  • Slowly move the on the screen away from the camera, then closer.
  • Tilt your phone screen slightly in case there’s a glare.
  • Turn your phone upside down.
  • If you’re on iOS, turn off “Invert Colors”.
  • Make sure the QR code isn’t distorted.
    • If you have an older device, the screen may be too small. Try a different device.
    • If your screen is cracked or scratched, the code may be distorted. Try a different device.
    • If you’re using a beta version of the Wyze app, make sure the cursor is not on the QR code

Wyze Cam v3 Mounting Guide

<p>The post Wyze Cam v3 Setup Guide NEW first appeared on NVR IPCAMERA SECURITY.</p>

<p>The post Wyze Firmware App Tools New first appeared on NVR IPCAMERA SECURITY.</p>