As the latest technology of Meeso Communications, H.265X has the advantages of low bit rate and low cost, it will surely stand out in the new round of market competition and achieve a new leap.

Add H265X Camera to Recoder

Read More :

1. XMEYE NVR Installation Guide
2. How to connect an IP camera to the XMEYE JFEYE DVR?
3. XMEYE Devices Password Reset New Method

In this article, I will show you how to add H.265X compression standard Camera to Dahua, Kbvision video recorder.

1. Settings on Camera

To add a Camera to a Dahua, Kbvision DVR, you need to adjust a few parameters as follows:

2. Add Camera to Recoder

After you have set the parameters on the Camera, you can add the following to the Recoder:

3. Check results

Here’s what you get when you’ve added the recorder:

A. View Camera on Web Browser

• Watch the main stream live:

• Watch live substream:

• Review recording:

B. View Camera on TV screen (HDMI/VGA)

• Watch the main stream live:

• Preview sub-stream:

• Review recording:

C. View Camera on SmartPSS software (PC)

• Go to main stream:

• Preview sub-stream:

• Review recording:

D. View Camera on DMSS (Phone) software

• Live view of main stream, sub stream and replay recording:

Thanks for following this post!!!

<p>The post Add H265X Camera to Recoder first appeared on NVR IPCAMERA SECURITY.</p>

-Confirm that the VCR version information interface nat status is connected successfully, if the state is to detect, in the network settings, Select automatically obtain ip, restart the recorder

-End of the phone need to download the xmeye mobile client, add a device to fill in the device name, serial number, mapped port: 34567, the

In the input device serial number in the start-up wizard to scan the SN I completed after confirmation

In the device List interface, click on the corresponding device to remote access

-A computer terminal can be divided into web pages and Client 2 kinds of access: the

a.Remote URL www.xmeye.net , divided by account

You need to register and press the device to log in, add the device serial number can be

b.The client computer may be in Xiongmai encyclopedia download

vms Software, in the device management interface, select the Add Manually, the log type select the Cloud ID, fill in the serial number of the device after the save and continue, the home page-monitor interface, select the add serial number for remote access

c. CMS software

In the system settings, the monitoring point to manage add

Then add a region, add after the selected area to add a device

Select the cloud, and then add the serial number

In the picture left mouse double-click to open picture

<p>The post XMEYE How to computer and mobile remote access first appeared on NVR IPCAMERA SECURITY.</p>