sony – NVR IPCAMERA SECURITY https://www.nvripc.com CCTV Help Desk Blog! Sat, 06 Apr 2024 18:16:47 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.nvripc.com/wp-content/uploads/2024/04/cropped-icons8-camera-91-32x32.png sony – NVR IPCAMERA SECURITY https://www.nvripc.com 32 32 TetherX Camera Setup Guide v2 https://www.nvripc.com/tetherx-camera-setup-guide-v2/ https://www.nvripc.com/tetherx-camera-setup-guide-v2/#respond Sat, 06 Apr 2024 18:14:46 +0000 https://www.nvripc.com/?p=7963 TetherX Camera Setup Guide v2, Tether your video surveillance, alarm panels, network infrastructure and other IP or Serial devices to the cloud. Monitor the health of your sites, cloud record cameras and integrate with third party services. The steps required to set up Samsung Cameras / DVRs and NVRs Setting Correct Profiles Please ensure you […]

<p>The post TetherX Camera Setup Guide v2 first appeared on NVR IPCAMERA SECURITY.</p>

]]>

TetherX Camera Setup Guide v2, Tether your video surveillance, alarm panels, network infrastructure and other IP or Serial devices to the cloud. Monitor the health of your sites, cloud record cameras and integrate with third party services.

The steps required to set up Samsung Cameras / DVRs and NVRs

Setting Correct Profiles

Please ensure you have 2 profiles configured on your device:

1.The Event or Recording Profile – This will be used to record events. For optimal performance, this this to the higher resolution / frame-rate of the device or as desired if you have specific requirements.
2.The Live Profile – This will be use for live view and the analytics stream. For optimal performance, set this to 720p 15fps – set this as the default profile on NVRs/DVRs.

IP Cameras

Cameras are the easiest to set up and should work out of the box. If the cameras are not working for any reason, please try one of the following for the Analytics Path and Recording Path:

• Analytics_Path: /profile2/media.smp
• Recordings_Path: /profile1/media.smp

The above assumes profile2 is set to 720p with 15fps and profile1 is set to the maximum resolution / frame rate.

Please also ensure the RTSP port is correct (554 by default).

Multi-Sensor IP Cameras & Encoders

If your device is a multi-sensor camera or an encoder, please set the Analytics Path as follows:

• /<sensor#>/profile2/media.smp
• /<sensor#>/profile2/media.smp

Sensor # range is from 0-3 (0 = Sensor 1, 1 = Sensor 2…)

For example for PNM-9081VQ, PNM-9080VQ, PNM-9322VQP, PNM-9002VQ, or PNM-7002VD:

• Camera 1: /0/profile2/media.smp
• Camera 2: /1/profile2/media.smp
• Camera 3: /2/profile2/media.smp
• Camera 4: /3/profile2/media.smp

NVR – Network Video Recorders

1.Set the correct RTSP port – The RTSP port for NVRs will be the last Device Port set on the unit. i.e. if device port is set to 554-558, 558 will be the port for RTSP.
2.Set the correct Analytics Path – Channel numbering starts at 0.
1.E.g. /LiveChannel/0/media.smp
3.Set the correct Recording Path – Channel numbering starts at 0.
1.E.g. /RecordChannel/0/media.smp

To get the full list of supported profiles, you can create a tunnel to the camera and visit the following URL (replacing {PORT} with the actual tunnel port):
​
​http://timeline.is:{PORT}/stw-cgi/media.cgi?msubmenu=videoprofilepolicy&action=view

You will see something like the following:

Channel.0.NetworkProfile=2

Channel.0.LiveProfile=2

Channel.0.RecordProfile=2

Channel.0.LiveMode=Manual

Channel.1.NetworkProfile=2

Channel.1.LiveProfile=2

Channel.1.RecordProfile=2

Channel.1.LiveMode=Manual

Please ensure the Live and Record profiles are mapped to the desired resolution/frame-rate/codec.

DVR – Digital Video Recorders

DVR recorders setup is similar to NVR setup with the following differences:

1.Set the correct RTSP port – The RTSP port for DVRs will be the last Device Port set on the unit. i.e. if device port is set to 4520-4524, 4524 will be the port for RTSP.
2.Set the correct Analytics Path – numbering starts at 0.
1.E.g. /<camera>camera
​

Note: If you have any issues following this process or if you would prefer the TetherX support team set this up to you, please contact us on the live chat in the bottom right of TetherX.

TetherX Camera Setup Guide v2

.

Can I use TetherX alongside HikConnect?

Can I use Hik-Connect on my Hikvision cameras and recorders?

Yes.

Please make sure that stream encryption is switched off under Configuration > Network > Advanced Settings:

HikConnect stream encryption uses a proprietary mechanism which is not available to third-parties. Please note TetherX will encrypt the stream to the highest standards, for more information please see our security white-paper.

Note: If you are still getting a broken stream or no live view, please try updating the camera and/or recorder firmware to the latest. There are known issues that have been addressed by Hikvision.

.

Live View – Technical Implementation Details

How TetherX implements live view to be compatible with all manufacturers

Introduction

The quality, latency and smoothness of live view streaming is dictated by many factors:

1.The available streams from the camera.
2.The connection speed both on site and on the viewing device.
3.The performance of the viewing device.
4.The underlying streaming technology that is being used.
5.Other manufacturer specific trickery/tweaking that may or may not be desirable.

Some of these are self-explanatory but some are a matter of trade-offs and priorities. This document explains the constraints and the decisions taken by TetherX when it comes to live view streaming.

Available Streams from Cameras

Typically cameras will provide 2 video streams as well as the ability to request a single image. These limitations dictate what is and isn’t possible when it comes to both recording and streaming.

💡 Note: More expensive and speciality cameras will provide additional video streams and custom streams of crops/de-warps of the same image (e.g. 180 or 360 cameras).

The streams are usually accessed through RTSP and the images through HTTP. For example:

• Primary Stream: 6 megapixels, 6mbit, H.265, 25fps RTSP stream
• Secondary stream: D1, 1mbit, H.264, 10fps RTSP stream
• Snapshot URL: Full resolution, 1 image over HTTP (refreshed 1 time per second)

The above is just an example as this ranges wildly depending on the hardware and customer requirements.

Formats

• H.265 – This is arguably the best currently available video format for most video applications, including video surveillance. The resulting space consumption is around 50% of H.264 for equivalent video quality (though your results may vary depending on the quality of the H.265 encoder chip and settings in your camera and/or recorder).
​
Please note this format is not compatible with older devices and operating systems. At present (Q3 2023) support is limited to:
◦ Windows (version 10 1709 or newer) and only when HEVC video extensions from the Microsoft Store are installed for devices with hardware support
◦ Windows (version 8 or newer), macOS ( Big Sur 11.0 or newer), Android, Linux (Chrome 108.0.5354.0 or newer) and Chrome OS platforms with hardware support
​
• H.264 – This is the only video format widely compatible across all devices. Most notably, older Windows and Android devices that cannot play H.265 in some cases. Please refer to https://caniuse.com/hevc
​
• VP9 (and older) – This is Google’s attempt at an open source H.265 alternative, while a great format on paper, it is not embraced by the industry and therefore does not see wide hardware support. Because of this, it tends to use significantly more resources to both record and display and is unfortunately not recommended when dealing with many simultaneous streams.
​
• MPEG4 – This is a legacy video format and is not generally compatible on modern devices and will need to be transcoded, leading to additional hardware costs, you will not see it on more recent cameras / recorders.
​
• MJPEG – Usually 5 to 25x larger in size for the same number of frames. While prominent on older cameras and recorders, anything since around 2008 has switched to video formats.

Transcoding vs Proxying

TetherX supports both transcoding and proxying/packaging. The differences between the two are as follows:

Transcoding is a process of taking the stream from a camera, decoding it and then re-encoding it into a different format. This is the ideal method to hit a specific requirement of Internet bandwidth and viewing size, but it is in most cases cost prohibitive as you need power hungry and expensive hardware to achieve.


​For context, a TetherBox Pico capable of recording 10 cameras will only be able to record 2 if transcoding (you can enable transcoding in TetherX by editing a camera and switching to the advanced tab).

Proxying & Packaging is what is used in most cases, where the original video stream is maintained but is packaged into different containers, for example .mp4 for video recording and .ts for local and high-def live streaming (see streaming technologies below).
​

This means that ultimately, you are at the mercy of the camera/recorder. If you need to open 16 cameras and each one is 1mbit, but your upload speed is only 10mbit, it will simply not work because the stream size cannot be adjusted without either:

1.Changing your camera settings (what budget equipment typically does) OR
2.Transcoding, which is very costly.

Video vs Images

TetherX use a combination of images and video to achieve different goals. It is important to understand the differences and advantages/disadvantages of each, which in turn dictate when either is used in TetherX.

The main difference between image and video compression is every image is self contained, where every video frame is part of a stream. While you may skip an image, skipping a frame in a video stream leads to parts of the image breaking / disappearing:

Systems that ignore broken/skipped data (e.g. streaming over UDP) will show a broken image while many systems will simply show a loading spinner while they wait for the next key frame (which is controlled by the key-frame interval set on the camera/recorder, typically set to 1 second, or the same number as fps, but sometimes much longer).

Because each image is self contained, it is typically 5 to 25x larger in bitrate vs video at 25 images per second. It may initially seem obvious that video should be used when accessing remotely, however there are certain important underlying trade-offs that make it a much tougher question which needs to be evaluated on a case by case basis, according to the following:

Advantages of Images

• Initial image loads 5-10x quicker than video (you need to load 1 frame, not 25 or potentially hundreds with a larger key-interval setting on the camera/recorder).
• Handles bandwidth fluctuations seamlessly (images can be skipped which is not possible with video).
• Latency is is lower (you load 1 frame, not 25 before showing the image, more suitable for PTZ / two way audio – see streaming technologies below).
• Compatible with all cameras and viewing devices.
• Low resource utilisation on both viewing and recording device, means you can view 100+ cameras simultaneously.
• Image transcoding/transizing is an efficient method to reduce bitrate when viewing more than 16 simultaneous cameras.
• The recording quality is not impacted when viewing live (some manufacturers reduce recording quality to accommodate live view).

Disadvantages of Images

• Much higher bandwidth (5x to 25x) to achieve the same fps in live view (trade-off of quality vs smoothness).
This leads to a much lower FPS in practice when bandwidth is kept the same.

Advantages of Video

• Much lower bandwidth (5x to 25x) for the same frame-rate/smoothness.
This usually leads to a much smoother video at the same bandwidth.

Disadvantages of Video

• Much higher initial loading times (5-10x longer).
• The usually higher latencies mak it more challenging for applications such as PTZ or two way audio (note: some cameras use low latency encoders to alleviate some of this but it is a hit and miss and leads to compatibility issues).
• Will simply not load if the connection cannot sustain all requires streams.

This usually restricts how many simultaneous cameras can be viewed as it is impossible to gracefully adapt the bitrate of each stream on the fly.

• Lower quality than images.
• Trickery is used by manufacturers to allow live view by reducing recording quality which leads to potentially losing critical video evidence.

Live View Streaming Technologies

TetherX uses all mainstream streaming technologies available and choses between them depending on the specific requirements and constraints:

• MJPEG – The technology is simple and what TetherX falls back to when other methods are not practical (e.g. resource constraints). The viewing device requests an image, once that image is downloaded, the previous image is replaced and the next image is requested. The image is always complete and in full quality and the speed is determined by the available resources.
​
If the device in question is limited by its performance or bandwidth, it loads the next image slower but still remains functional. This leads to a reliable live view that automatically adapts to the resources available and can sustain a virtually unlimited number of cameras viewed simultaneously. This however by design does not provide high frame-rate which viewers associate with smoothness. It also is not efficient when viewing a smaller number of cameras at higher frame-rates.
​
• HLS – This is the technology used by platforms like Netflix, Amazon Prime, etc. This technology is pioneered by Apple and works by the browser requesting a playlist, which provides the next available video file. Typically, the stream is broken up into 1 or 2 second video files (this duration is set by the key interval setting on the camera or recorder and has a significant impact on latency).
​
Unless transcoding, these files simply re-package the same video stream coming from the camera and therefore, if the connection speed cannot sustain all the requested streams on screen, the video will take a long time to start and will stop after the initial second, showing a loading spinner until the next video file is fully downloaded. Effectively, sufficient bandwidth is crucial.
​
Even with sufficient bandwidth, the typical latency can be anywhere from 2 to 5 seconds which leads to a poor experience in applications such as PTZ or Two Way Audio.
​
• LHLS – This is an extension on the above technology that keeps the connection open instead of re-requesting the playlist each time, it can reduce latency by up to 50% but can be less reliable in some situations.
​
• RTSP/RTP/RTMP – These are more traditional streaming technologies that are not readily compatible with most devices and require special flash players, plugins or custom software. This can provide lower latencies than LHLS but requires additional configuration and software. TetherX uses this internally to get the streams from the cameras/recorders and convert them into more compatible streaming technologies.
​
• WebRTC – This (or similar) is the technology used for video conferencing like Zoom, Teams, Skype, etc. It typically requires transcoding the video to something like VP8/9 with special low latency encoder parameters. While yielding the best results, it is cost prohibitive in most cases and is limited to a small number of simultaneous streams (see transcoding above). This has been tested by TetherX but it is presently not used in production.

How TetherX Does It

TetherX supports most streaming technologies and switches between them depending on context.

When local streaming (the TetherBox is able to detect if you are on the same network), if we are viewing less than 10 cameras simultaneously TetherX switches to LHLS (see above) to show the primary video stream from each camera at full resolution/frame-rate (assuming your viewing device is capable of displaying this many streams). If this is not working well for you, you are presented with a toggle to switch off High-def streaming to fall back to loading images.

When full screening a camera (double tap/click a camera), we assume you want the higher quality and we switch to the full primary stream. If your connection is not able to sustain this stream, we automatically fall back to loading images.

When viewing multiple sites / cameras over Internet in record mode, we switch to image viewing but we transcode/transize the images depending on the size of each live view box on your screen. This ensures that you are able to view many simultaneous cameras, the latency is lower than video, it automatically adapts to the available bandwidth and it does not impact recording quality. This does however mean a lower fps.

When viewing multiple sites / cameras over Internet in monitor mode, we proxy the connection directly to the image provided by the camera. This leads to a further lowering of fps but ensures the TetherBox can monitor the health of and provide live view of 10x more cameras than in record mode.

Learn more about using Live View in TetherX here.

How Hikvision iVMS Does it

Because of the constrains outlined above, in order to show smooth video in iVMS (and Dahua PSS) software, if the connection speeds both on site and viewing device cannot accommodate the streams, the software temporarily reconfigures the cameras to send a lower bitrate stream while keeping the resolution the same.

💡 Note: if you happen to kill the software at this point (or lose connection), this can cause the camera to permanently record in lower quality.

Because many cameras or recorders only support a single stream at above D1 resolution, this means that not only is the live view quality reduced, but also the video being recoded which can lead to losing critical video evidence.

In our testing, limiting the connection to 5mbit 200ms upload and streaming just 4 cameras in HD resulted in blocky and usable footage being recorded on the NVR. It also took over 10 seconds to get an initial image, however the motion was smooth (25fps) once loaded.

In comparison when using images (outside of the iVMS/PSS software), the images loaded almost immediately, the image quality was significantly higher, but the frame-rate was poor (3-4fps) – still sufficient for making decisions in a control room setting, but understandably disappointing in smoothness by comparison. (Note: higher fps can still be achieved by full screening a single camera on demand).

When viewing a smaller number of cameras from the same manufacturer on a single PC or phone, it looks impressive to have smooth 25fps video on iVMS/PSS/others. However, when dealing with 100+ or even 32 cameras, from different manufacturers, different firmware versions, with multiple users, across multiple sites, with differing and fluctuating bandwidths, you begin to appreciate the trade-offs and advantages/disadvantages of each approach.

💡 Note: This approach of custom code to adjust Hikvision camera settings to achieve smoother live view is only suitable if you do not care about recording quality and you are optimising for a single manufacturer with compatible models/firmware.


​TetherX is an open platform with a focus on convention over configuration, we prioritise the integrity of recorded footage above live view and we implement approaches that work across all recorders/cameras as well as viewing devices.

.

Uniview / UNV Camera Setup Guide (for use with TetherX)

Using TetherX with Uniview / UNV Cameras

Summary

Uniview or UNV cameras should work out of the box in most cases. However please note depending on the age of the camera and firmware versions, the RTSP path may be different.


Please try the following paths:

• /media/video1
• /profile1
• /videoMain
• /media/videoMain

You can set this in the Analytics Path or Recording Path by editing your camera in TetherX:

1.Tap on Admin -> Cameras
2.Tap on the edit icon on the Uniview camera:

3. Open the Advanced tab and enter the required Analytics Path and Recording Path. Please try all the paths given as examples above.

.

Camera Setup Checklist

Adding IP cameras to TetherX Please note your camera may have a different interface and options may be located in a different part of the interface. Please refer to the camera manual if you are not able to find the relevant option.

Network

Set a Static IP

Set camera to unused IP on 192.168.88.x network
set DNS/Gateway to 192.168.88.100

Important: Although it’s possible to configure your camera with DHCP, and TetherBox is capable of detecting any IP changes, we strongly advise against this practice for security reasons. This setting can potentially allow the camera to connect directly to the internet, raising a range of security issues. These include unauthorised access through back doors, or the risk of security holes in the camera’s firmware if it’s not updated regularly.

Video & Audio

Recording Stream (primary)

• For 4K: H.264 4K 25FPS VBR – Quality: Medium – Type: Variable/VBR – Bitrate: 4096kbit – Key Internal: 50, No Watermark
• For 1080P: H.264 1080P 25FPS VBR – Quality: Medium – Type: Variable/VBR – Bitrate: 2048kbit – Key Internal: 50, No Watermark

Analytics Stream (secondary)

• Recommended: H.264 720P – 8FPS – Type: Variable/VBR – Quality: Medium – Bitrate: 1024kbit – Key Interval: 16 (double the frame rate).
• The analytics stream is used to detect the objects vs background, please ensure this is 720P or below at 10FPS or lower.

Conditions

.

• Anti Flicker: 50hz (in the UK, adjust for your desired locale)
• BLC: WDR – Middle

Audio (optional)

• Sampling Rate 16K
• Enable Main/Sub Stream
• Encode Mode: G.711A

Date & Time

One option is to disable time from being displayed in the camera at all. You generally do this under OSD settings. If you do wish time to be displayed in the image, you need to set the following:

•Usually under Basic/System -> General -> Date & Time
•NTP Server: Set to TetherBox IP address (usually 192.168.88.100)
•DST: Set appropriate settings for your Timezone. e.g. British Summer Time begins at 01:00 GMT on the last Sunday of March and ends at 01:00 GMT (02:00 BST) on the last Sunday of October

<p>The post TetherX Camera Setup Guide v2 first appeared on NVR IPCAMERA SECURITY.</p>

]]> https://www.nvripc.com/tetherx-camera-setup-guide-v2/feed/ 0 Current CCTV default password List NEW https://www.nvripc.com/current-cctv-default-password-list-new/ https://www.nvripc.com/current-cctv-default-password-list-new/#comments Tue, 25 Jan 2022 06:50:41 +0000 https://www.nvripc.com/?p=2981 When you open box of any camera, DVR, NVR or Any other IP Based device, first thing comes in your mind about is the default IP  address and password. Hence this article is all about default CCTV default password. So this article is not limited to a particular “CCTV default password“,  it covers almost all the […]

<p>The post Current CCTV default password List NEW first appeared on NVR IPCAMERA SECURITY.</p>

]]> When you open box of any camera, DVR, NVR or Any other IP Based device, first thing comes in your mind about is the default IP  address and password.

Hence this article is all about default CCTV default password.

So this article is not limited to a particular “CCTV default password“,  it covers almost all the brands but if few brands are missing kindly mention in the comment. I try to cover almost all IP addresses and passwords but few products have a unique code that will mention in their user manual.

Sn. CCTV Company Name Default Username Default  Password Default IP Address
1. Hikvision admin 12345 192.0.0.64
2. TVT admin 123456 192.168.226.1
3. Sony admin admin 192.168.0.100
4. Samsung root 4321 or admin 192.168.1.200
5. Samsung admin 4321 or 1111111 192.168.1.200
6. FLIR admin fliradmin 192.168.250.116
7. Avigilon admin admin no default/DHCP
8. Panasonic admin 12345 192.168.0.253
9. Panasonic admin1 password 192.168.0.253
10. ACTi Admin or admin 123456 192.168.0.100
11. Axis root pass or no set password 192.168.0.90
12. Bosch service service 192.168.0.1
13. Bosch Dinion no set password 192.168.0.1
14. Vivotek root no set password no default/DHCP
15. Arecont Vision admin no set password no default/DHCP
16. Honeywell administrator 1234 no default/DHCP
17. Merit Lilin Camera admin pass no default/DHCP
18. Merit Lilin Recorder admin 1111 no default/DHCP
19. Mobotix admin meinsm no default/DHCP
20. Sanyo admin admin 192.168.0.2
21. CBC Ganz admin admin 192.168.100.x
22. Cisco no default no set password 192.168.0.100
23. CNB root admin 192.168.123.100
24. Pelco admin admin no default/DHCP
25. PiXORD admin admin 192.168.0.200
26. PiXORD root pass 192.168.0.200
27. LTS Security admin 123456 192.0.0.64
28. March Networks admin [leave blank] unknown
29. Messoa admin Model# of camera 192.168.1.30
30. 3xLogic admin 12345 192.0.0.64
31. American Dynmics admin admin 192.168.1.168
32. Basler admin admin 192.168.100.x
33. Brickcom admin admin 192.168.1.1
34. DRS admin 1234 192.168.0.200
35. DVTel Admin 1234 192.168.0.250
36. DynaColor Admin 1234 192.168.0.250
37. Foscam admin [leave blank] unknown
38. IOImage admin admin 192.168.123.10
39. IPX-DDK root Admin or admin 192.168.1.168
40. IQInvision root system no default/DHCP
41. JVC admin Model# of camera no default/DHCP
42. Northern admin 12345 192.168.1.64
43. VideoIQ supervisor supervisor no default/DHCP
44. QVIS Admin 1234 192.168.0.250
45. Speco admin admin 192.168.1.7
46. StarDot admin admin no default/DHCP
47. Starvedia admin no set password no default/DHCP
48. Toshiba root ikwb 192.168.0.30
49. Digital Watchdog admin admin 192.168.1.123
50. Speco root root 192.168.1.7
51. W-Box admin wbox123 192.0.0.64
52. Wodsee admin [leave blank] unknown
53. GeoVision admin admin 192.168.0.10
54. Grandstream admin admin 192.168.1.168
55. GVI Admin 1234 192.168.0.250
56. Trendnet admin admin 192.168.10.1
57. UDP root unknown unknown
58. Ubiquiti ubnt ubnt 192.168.1.20
59. Verint admin admin no default/DHCP
60. Canon root Model# of camera 192.168.100.1
63. Costar root root unknown
64. Dahua admin admin 192.168.1.108

 

So below is the list of CCTV default passwords and Usernames.

1. Hikvision Default Password and IP address

Hikvision one of the best CCTV camera brands all over the world and it has many customers around the world. Sometimes they need to know for the default password of the Hikvsion’s devices. Here is the default password of Hikvision’s devices.

Username: admin

Password: 12345

IP address: 192.0.0.64/192.168.1.64

IP Tool: Download SADP Tool

For new models, you can reset the password via the SADP tool. Please click the link below and follow the instructions on the pdf file

CP Plus CCTV Default Password 

Username:  admin
Password:  admin
IP Address:  192.168.1.108 / 192.168.1.240

2. Dahua default IP address and password

Dahua default IP address is in the series of  192.168.1.XXX and if you need to change IP address then you need to follow the below link “How to change Dahua IP address“.

Username-admin

Password-admin

For DVR and NVR, following are the  default accounts:

  • admin/admin admin/123456 (master account of local and network accessing)
  • 888888/888888 (local administrator)
  • 666666/666666 (restricted user)
  • default / default (hidden user)

3. CP Plus IP camera default IP address

User name: admin
Password: admin
IP Address :  192.168.1.108 / 192.168.1.240

CP PLUS IP camera address finder tool

If cameras being used on 3rd party recorders or you need to configure a large number of cameras. The first step will be to use the Tools to find and configure the IP address and the local area network. Here is the link to the CP PLUS IP camera address finder tool.

 

4. Axis camera default IP

Axis camera User name: root
Password: pass
default IP: 192.168.0.90

5. Bosch camera default IP

For old models:
Username: service
Bosch IP camera default password: service
IP Address: 192.168.0.1
For new models:
You can reset the camera by pushing the reset button about 8 seconds.

6. GEOVISION default password

Username: admin
Password: admin
IP Address: 192.168.1.108

7. TVT  IP camera default IP

DVR and NVR

Username: admin
Password: 123456
IP Address: 192.168.226.201

IP Camera

Username: admin
Password: 123456
IP Address: 192.168.226.201

8. Gobbler default IP address and password

Username: admin
Password: 123456

9. Panasonic default IP address and password

User name: admin
Password: 12345
IP Address:  192.168.0.253/10.1.1.12/192.168.0.10

10. SONY default IP address and password

Username: admin

Password: admin

IP Address: 192.168.0.100

11. Samsung default IP address and password and Samsung DVR default password

User name: admin
Password: 4321/111111/1111111
IP Address: 192.168.1.200

12. Ubiquiti default password

Username: ubnt
Password: ubnt
IP Address: 192.168.1.20

13. Mobotix camera default password.

Mobotix:
Username: admin
Password: meinsm

14. Messoa  default IP address and password

Username: admin
Password: 1234 or model number of camera or
IP address: 192.168.1.30

15. LTS Security default IP address and password

Username: admin
Password: 12345/123456
IP Address: 192.0.0.64

16. Speco default IP address and password

Speco
For old models:
Username: root /admin
Password: root/admin/1234

17. Canon default IP address and password

Username: root
Password: camera model number
IP Address: 192.168.100.1

17. Cisco default IP address and password

Username: No Username
Password: No Password
IP Address: 192.168.0.100

18. FLIR default IP address and password

 

Username: admin
Password: fliradmin
IP Address: 192.168.250.116

19. Foscam default IP address and password

Username: admin
Password: Blank
IP Address: search By IP tool, Click here to download

20. Honeywell default IP address and password

Username: administrator
Password: 1234
IP Address: DHCP enabled

Honeywell IP Utility is a free program that enables users to configure the IP network settings, name device(s), upgrade firmware and change passwords.

21. PELCO default IP address and password

Username: admin
Password: admin
IP Address: DHCP enabled

21. QVIS default IP address and password

Username: Admin
Password: 1234
IP Address: 192.168.0.250

22. SANYO default IP address and password

Username: admin
Password: admin
IP Address: 1192.168.0.2

23. Toshiba default IP address and password

Username: root
Password: ikwb
IP Address: 192.168.0.30

24.  3xLogic default IP address and password

Username: admin
Password: 12345
IP Address: 192.0.0.64

25.  Basler default IP address and password

Username: admin
Password: admin
IP Address: 92.168.100.x

26.  CNB default IP address and password

Username: root
Password: admin
IP Address: 192.168.123.100

27.  DIGISOL default IP address and Password

Username: admin
Password: 888888
IP Address: 192.168.1.10

28. Uniview default IP address and password

Username: admin
Password: 123456
IP Address: DHCP enable.

Uniview IP camera address finder tool

If cameras being used on 3rd party recorders. The first step will be to use the EZTools software on a PC to find the IP address of the cameras and then you change according to your local network. The second step will change the camera protocol to ONVIF. Here is the download link of EZ tool.

 

29. LILIN default IP address and password

Username: admin
Password: 1111
IP Address: 63.110.100.xxx/DHCP Enable

30. Trendnet default IP address and Password

Username: admin
Password: admin
IP Address: 192.168.10.1

I hope this information is helpful to you.  If you have any query, please write to us in the comment box below.

<p>The post Current CCTV default password List NEW first appeared on NVR IPCAMERA SECURITY.</p>

]]> https://www.nvripc.com/current-cctv-default-password-list-new/feed/ 19 Firmware for Chinese DVR, NVR (H.264, H.265) https://www.nvripc.com/firmware-for-chinese-dvr-nvr-h-264-h-265/ https://www.nvripc.com/firmware-for-chinese-dvr-nvr-h-264-h-265/#comments Tue, 04 May 2021 11:33:26 +0000 https://www.nvripc.com/?p=2189 Hangzhou Xiongmai Technology Co., Ltd is a Chinese company that manufactures surveillance equipment such as DVRs, NVRs, security cameras, etc. Often the XM products are sold by other brand names that use the same type of interface or slightly modified. Sometimes these types of surveillance devices are generally labeled as Chinese cameras, Chinese DVRs or […]

<p>The post Firmware for Chinese DVR, NVR (H.264, H.265) first appeared on NVR IPCAMERA SECURITY.</p>

]]> Hangzhou Xiongmai Technology Co., Ltd is a Chinese company that manufactures surveillance equipment such as DVRs, NVRs, security cameras, etc.

Often the XM products are sold by other brand names that use the same type of interface or slightly modified. Sometimes these types of surveillance devices are generally labeled as Chinese cameras, Chinese DVRs or Chinese NVRs, H.264 Chinese DVR, H.265 Chinese NVR, or just “generic Chinese DVRs” etc.

In this article, you can download firmware for the DVR, NVR, security camera from Xiong Mai and these firmwares are applicable to other surveillance devices that are based on processors such as Hi3516C, Hi3518C and Hi3518E, Hi3516D, Hi3516A.

  • 1.0MP Camera Modules: IPG-50H10PL-S, IPG-50H10PL-AE, IPG-50H10PL-B, IPG-50H10PL-P
  • 1.0MP WDR Camera Modules: IPG-52H10PL-B, IPG-52H10PL-P
  • 1.3MP Camera Modules: IPG-53H13PES-SL, IPG-53H13PES-S, IPG-53H13PLS-S
  • 1.3MP Aptina CMOS Camera Modules: IPG-53H13PL-S, IPG-53H13PL-AE, IPG-53H13PL-B, IPG-53H13PL-P
  • 1.3MP Sony Low Light CMOS Camera Modules: IPG-53H13P-S, IPG-53H13P-AE, IPG-53H13P-B, IPG-53H13P-P
  • 2.0MP CMOS Low Light Camera Modules: IPG-53H20PL-S, IPG-53H20PL-AE, IPG-53H20PL-B, IPG-53H20PL-P
  • 4.0MP Camera Modules: IPG-83H40PL-B
  • 5.0MP Low Light Camera Modules: IPG-83H50P-B, IPG-83H50P-P
  • 1.0 / 1.3MP Hi3518E Camera Modules: IPG-50H10PE-S, IPG-50H10PE-SL, IPG-53H10PE-S, IPG-53H13PE-S
  • P2P IP Camera Modules: IPM-50H10PE-O (R), IPG-50H10PL-R, IPG-53H13PL-R
  • Wi-Fi Camera Modules: IPG-50H10PE-WP, IPG-53H13PE-WP
  • Panoramic camera module: IPG-53M10F-B
  • Intelligent analysis modules: IVG-HP200S-SE, IVG-HP200S-AE, IVG-HP201Y-SE, IVG-HP201Y-AE, IVG-HP203Y-SE, IVG-HP203Y-AE, IVG-HP500NR-AE

Firmware update for Chinese DVR, NVR, cameras

To update the IP camera firmware, you need to find out the device version. Each camera or DVR needs its own firmware. To check the device version of the IP camera from Xiong Mai, open the camera’s web interface, then navigate to Device Config > Setting > Info > Version.

From this window, we need the number after V4.02.R12. This number contains 17 digits, separated by a dot. In our example: 000 06 510. 10010. 1407.


If your first three digits are different from 000, then you have a modified firmware from the OEM manufacturer. Usually, these changes relate to the web interface and localization, so we can safely replace them with 000, the resulting number is the desired version of the device.

Below is an example of the firmware version from a DVR. Open System Info > Version], and there we see the version of the system in the line “System”. For example, the system version: V4.02.R11.00031095.12001.

Download Chinese H.264 DVR and H.265 NVR firmware

Search the model from the list shown in the next section. Update on your own risk. Don’t update if you’re not sure that you got the correct firmware. Contact the seller or the installer to get the right information.

H265 New Firmware List
Model Download Link
00000202（NBD8016R-PL-V2 Link
00000203（NBD8008R-PL Link
00000206（NBD8008R-YL-EP) Link
00000208（NBD8008R-PL-EP) Link
00000209 (NBD8004R-PL-EP) Link
0000020B(AHB8008T-GL) Link
0000020D（AHB8004T-GL Link
0000020E(NBD8004R-YL-EP) Link
0000020F(NBD8008R-PWS) Link
0000020G（AHB8016T-MH) Link
0000020H（AHB8008R-MH Link
0000020I(INBD8008T-QV) Link
0000020J（MVR7004V-LM) Link
0000020K(NBD7904T-PL-XPOE) Link
0000020N(NBD8004R-FWS) Link
0000020N(NBD8004R-FWS) Link
0000020P(AHB8032F-LM) Link
0000020Q(AHB8016T-LME) Link
0000020R(AHB8004R-GS) Link
0000020S(AHB8004R-MH) Link
0000020V(AHB8008R-LME) Link
0000020W(AHB8016F-GL) Link
0000020X(AHB8032F-LME) Link
0000020Y(AHB8004R-GS-4PWS) Link
0000020Z(NBD8032H-UL) Link
00000211(NBD8908T-PL-XPOE) Link
00000212(NBD8904T-GS-XPOE) Link
00000213(AHB8004R-GS-4PWS2) Link
0000021L(NBD8008R-PWS-V2) Link
0000021Q(NBD8004RA-ULA) Link
0000021T(AHB80N08R-GS) Link
00000227(AHB8004R-MH-NVT) Link
00000227(AHB80N04R-MH) Link
00000228(AHB8008R-LME) Link
00000228(AHB8008R-LME-NVT) Link
00000230(AHB80N04R-GS) Link
00000232(AHB80N16T-LME) Link
0000023G(AHB80N16T-LM) Link
0000023H(AHB80N04T-GL) Link
00031118(NBD7804T-F) Link
00031119（NBD7808T-PL） Link
0003114A(AHB7804R-MH-V3) Link
0003121G(AHB7804R-LMS-V5) Link
0003121G(AHB7804R-LMS-V5) Link
0003121H(AHB8804R-LMS) Link
J8780221(NBD8032H8-KEY) Link
00000202（NBD8016R-PL-V2) Link
00000203（NBD8008R-PL） Link
00000206（NBD8008R-YL-EP） Link
00000208（NBD8008R-PL-EP） Link
00000209(NBD8004R-PL-EP) Link
0000020B(AHB8008T-GL) Link
0000020D（AHB8004T-GL） Link
0000020E(NBD8004R-YL-EP) Link
0000020F(NBD8008R-PWS) Link
0000020G（AHB8016T-MH) Link
0000020H（AHB8008R-MH) Link
0000020I(INBD8008T-QV) Link
0000020J（MVR7004V-LM) Link
0000020K(NBD7904T-PL-XPOE) Link
0000020N(NBD8004R-FWS) Link
0000020N(NBD8004R-FWS) Link
0000020P(AHB8032F-LM) Link
0000020Q(AHB8016T-LME) Link
0000020R(AHB8004R-GS) Link
0000020S(AHB8004R-MH) Link
0000020U(AHB7016T-LM-V5) Link
0000020V(AHB8008R-LME) Link
0000020W(AHB8016F-GL) Link
0000020X(AHB8032F-LME) Link
0000020Y(AHB8004R-GS-4PWS) Link
0000020Z(NBD8032H-UL) Link
00000211(NBD8908T-PL-XPOE) Link
00000212(NBD8904T-GS-XPOE) Link
00000213(AHB8004R-GS-4PWS2) Link
0000021L(NBD8008R-PWS-V2) Link
0000021Q(NBD8004RA-ULA) Link
0000021T(AHB80N08R-GS) Link
00000227(AHB8004R-MH-NVT) Link
00000227(AHB80N04R-MH) Link
00000228(AHB8008R-LME) Link
00000228(AHB8008R-LME-NVT) Link
00000230(AHB80N04R-GS) Link
00000232(AHB80N16T-LME) Link
0000023G(AHB80N16T-LM) Link
0000023H(AHB80N04T-GL) Link
00031118(NBD7804T-F) Link
00031119（NBD7808T-PL） Link
0003114A(AHB7804R-MH-V3) Link
0003121G(AHB7804R-LMS-V5) Link
0003121G(AHB7804R-LMS-V5) Link
0003121H(AHB8804R-LMS) Link
J8780221(NBD8032H8-KEY) Link

 

C6380202（NBD8016R-PL-V2) Link
C6380203（NBD8008R-PL) Link
C6380206（NBD8008R-YL-EP) Link
C6380208（NBD8008R-PL-EP） Link
C6380209（NBD8004R-PL-EP) Link
C638020B（AHB8008T-GL） Link
C638020D（AHB8004T-GL） Link
C638020E（NBD8004R-YL-EP） Link
C638020F(NBD8008R-PWS) Link
C638020G（AHB8016T-MH） Link
C638020H（AHB8008R-MH） Link
C638020K(NBD7904T-PL-XPOE) Link
C638020K(NBD7904T-PL-XPOE) Link
C638020N（NBD8004R-FWS) Link
C638020P(AHB8032F-LM) Link
C638020Q(AHB8016T-LME) Link
C638020R(AHB8004R-GS) Link
C638020S(AHB8004R-MH) Link
C638020V(AHB8008R-LME) Link
C638020W(AHB8016F-GL) Link
C638020X(AHB8032F-LME) Link
C638020Y(AHB8004R-GS-4PWS) Link
C638020Z(NBD8032H-UL) Link
C6380211(NBD8908T-PL-XPOE) Link
C6380212(NBD8904T-GS-XPOE) Link
C6380213(AHB8004R-GS-4PWS2) Link
C638021G(AHB7804R-LMS-V5) Link
C638021L(NBD8008R-PWS-V2) Link
C638021T(AHB80N08R-GS) Link
C6380227(AHB80N04R-MH) Link
C6380228(AHB8008R-LME-NVT) Link
C6380230(AHB80N04R-GS) Link
C6380232(AHB80N16T-LME) Link
C638023A(AHB80X04R-MH) Link
C638023D(NBD80X16S-KL) Link
C638023G(AHB80N16T-LM) Link

 

E92A720KNBD7904T-PL-XPOE Link
E92A7209(NBD8004R-PL-EP) Link
E92A7203(NBD8008R-PL) Link
E92A720A(NBD8004R-PL) Link
E92A7189(NBD8032H-QE) Link
E92A7179(NBD8032H-P) Link
E92A7107(NBD7024H-P) Link
E92A7202(NBD8016R-PL-V2) Link
E92A7208(NBD8008R-PL-EP) Link
E92A720F(NBD8008R-PWS) Link
E92A7197(NBD8025R-PL) Link
E92A720Z(NBD8032H-UL) Link
09901188（NBD8016T-Q） Link
09901189（NBD8032H-QE） Link
09901191（AHB7804R-LM-V3） Link
09901192（NBD7008T-PL-V2） Link
09901194（AHB7004T-LME-V3） Link
09901195（AHB7008T-LME-V3） Link
09901196（AHB7016T-LME-V3） Link
09901197（NBD8025R-PL） Link
09901200（NBD7004R-FWS） Link
09901202（NBD8016R-PL-V2） Link
09901203（NBD8008R-PL） Link
09901206（NBD8008R-YL-EP） Link
09901208（NBD8008R-PL-EP） Link
09901209（NBD8004R-PL-EP） Link
0990120A（NBD8004R-PL） Link
0990120B（AHB8008T-GL） Link
0990120D(AHB8004T-GL) Link
0990120E（NBD8004R-YL-EP） Link
0990120F(NBD8008R-PWS) Link
0990120G(AHB8016T-M) Link
0990120H ( AHB8008R-MH ) Link
0990120K(NBD7904T-PL-XPOE) Link
0990120N(NBD8004R-FWS) Link
0990120P(AHB8032F-LM) Link
0990120R(AHB8004R-GS) Link
0990120S(AHB8004R-MH) Link
0990120T(NBD8004R-PE) Link
0990120W(AHB8016F-GL) Link
0990120X(AHB8032F-LME) Link
0990120Z(NBD8032H-UL) Link
Version Model Platform Link
503 BLOCK365_5003L BLOCK365_VGA Link
504 BLOCK365_5004 BLOCK365_VGA Link
510 BLOCK365-5010L BLOCK365_5010L Link
513 BLOCK365_5013L BLOCK365_720P_CMOS Link
520 BLOCK365-5020L BLOCK365_2M Link
523 BLOCK365_5213 BLOCK365_5213 Link
531 BLOCK365_5313 BLOCK365_5313 Link
563 BLOCK365_5013D_D_Externel BLOCK365_720P_CMOS Link
570 BLOCK365_5020D_D_Externel BLOCK365_2M Link
604 BLOCK365_6004 BLOCK365_CVBS Link
606 BLOCK365_6006 BLOCK365_650 Link
613 BLOCK365_6013 BLOCK365_720P Link
703 BLOCK365_K5003 BLOCK365_K5003 Link
710 BLOCK365_K5010 BLOCK365_K5010 Link
803 BLOCK365_R5003 BLOCK365_ROBOT Link
804 BLOCK365_IVM_6004 BLOCK365_IVM_6004 Link
810 BLOCK365_R5010L BLOCK365_IVM_5010/BLOCK365_R5010L Link
814 BLOCK365_IVM_5004 BLOCK365_IVM_5004 Link
823 BLOCK365_IVM_5213 BLOCK365_IVM_5213 Link
831 BLOCK365_IVM_5313 BLOCK365_IVM_5313 Link
Hisilicon chipset
1510 IPC_HI3518C_50H10L
IPC_HI3518C_50H10L_AE		 50H10L Link
1520 IPC_HI3516C_50H20L 50H20L Link
1521 IPC_HI3518C_52H10L 52H10 Link
1531 IPC_HI3518C_53H13
IPC_HI3518C_53H13_AE		 53H13 Link
1532 IPC_HI3516C_53H20L 53H20L Link
1538 IPC_HI3518C_53H13P_IMX138 53H13_IMX138 Link
1710 IPC_HI3518C_KA50H10L HI3518E_KA50H10L_S39 Link
1810 IPC_HI3518C_RA50H10 RA50H10L Link
1831 IPC_HI3518C_RA53H13 RA53H13 Link
1900 IPC_HI3518C_N51813 N51813 Link
1901 IPC_HI3516C_N52020 N51820 Link
1902 IPC_HI3518C_N51013 N51013 Link
1905 IPC_HI3518C_N51813L N51813L Link
1906 IPC_HI3516C_N51820L N51820L Link
1907 IPC_HI3518C_53H13AF 53H13AF Link
1908 IPC_HI3516C_53H20AF 53H20AF Link
1928 IPC_HI3518C_53H13AF_2880_RT3070 53H13AF_2880 Link
1929 IPC_HI3516C_53H20AF_2880_RT3070 53H20AF_2880 Link
2510 IPC_HI3518C_50H10L_S38 50H10L_S39 Link
2520 IPC_HI3516C_50H20L_S38 50H20L_S39 Link
2531 IPC_HI3518C_53H13_S38 53H13_S39 Link
2532 IPC_HI3516C_53H20L_S38 53H20L_S39 Link
2538 IPC_HI3518C_53H13P_IMX138_S38 53H13_IMX138_S39 Link
6210 IPC 50H10Q_S HI3518E_50H10Q_S39 Link
6231 IPC 53H13Q_S HI3518E_53H13Q_S39 Link
6510 IPC_HI3518E_50H10L_S38 HI3518E_50H10L_S39 Link
6531 IPC_HI3518E_53H13_S38 HI3518E_53H13_S39 Link
6538 IPC_HI3518E_53H13P_IMX138_S38 HI3518E_53H13_IMX138_S39 Link
6810 IPC_HI3518E_RA50H10L_S38 HI3518E_RA50H10L_S39 Link
7510 IPC_HI3518E_50H10L_8188_S38 HI3518E_50H10L_8188_S39 Link
7531 IPC_HI3518E_53H13_8188_S38 HI3518E_53H13_8188_S39 Link
7518 IPC_HI3518E_C50H10_8188_S38 HI3518E_C50H10_S39 Link
7810 IPC18E_RA50H10L_8188_S38 HI3518E_RA50H10L_8188_S39 Link
7831 IPC18E_RA53H13_8188_S38 HI3518E_RA53H13_8188_S39 Link
10850 IPG-83H50P-B
IPG-83H50P-P		 83H50 Link
14830 IPC_HI3516D_83H30 HI3516D_83H30 Link
14840 IPG-83H40PL-B
IPG-83H40PL-P		 HI3516D_83H40 Link
14843 IPC_HI3516D_83H40AF HI3516D_83H40AF Link
14900 IPC_HI3516D_N83020 HI3516D_N83020 Link
14911 IPC_HI3516D_83H20
IPC_HI3516D_83H20_AE_RT3070		 HI3516D_83H20 Link
00014912
00039912		 IPC_HI3516D_83H40W_RT3070
IPC_HI3516D_83H40W_AE_2G_RT3070		 HI3516D_83H40W
HI3516D_83H40W_2G		 Link
14913 IPC_HI3516D_83H20AF_RT3070 HI3516D_83H20AF Link
14914 IPC_HI3516D_N81820_RT3070 HI3516D_N81820 Link
14915 IPC_HI3516D_N81840_RT3070 HI3516D_N81840 Link
14927 IPG-HP500NS-A HI3516D_83H50N Link
00018510
B9518510		 IPC_HI3518EV200_50H10L_S38
WIFI_NVR_IPC_HI3518EV200_50H10L_S38_XM711		 50H10L_S38 Link
18531 IPC_HI3518EV200_53H13_S38 53H13_S38 Link
00018520
B9518520		 IPC_HI3518EV200_50H20L_S38 50H20L_18EV200_S38 Link
18532 IPC_HI3516CV200_53H20L_S38 53H20L_16CV200_S38 Link
18813 IPC_HI3518EV200_RM50H20L_S38_8188EU RM50H20L_S38 Link
19531 IPC_HI3518EV200_53H13 53H13 Link
19976 IPC_HI3518EV200_N51820N N51820N_18EV200 Link
00020510
B9520510		 IPC_HI3518EV200_50H10L_8188EU_S38
WIFI_NVR_IPC_HI3518EV200_50H10L_S38		 50H10L_8188EU_S38 Link
00020531
B9520531
A6420531		 IPC_HI3518EV200_53H13_8188EU_S38
WIFI_NVR_IPC_HI3518EV200_53H13_S38
XMJP_XMJP_HI3518EV200_53H13-S_8188EU_S38		 53H13_8188EU_S38
53H13_S38
53H13-S_18EV200_8188EU_S38		 Link
20520 IPC_HI3518EV200_50H20L_8188EU_S38
WIFI_NVR_IPC_HI3518EV200_50H20L_S38		 50H20L_18EV200_8188EU_S38 Link
20916 IPC_HI3518EV200_RC50H10_8188EU_S38 RC50H10_8188EU_S38 Link
20917 IPC_HI3518EV200_RC50H20_8188EU_S38 RC50H20_8188EU_S38 Link
20918 IPC_HI3518EV200_RC53H13_8188EU_S38 RC53H13_8188EU_S38 Link
20953 IPC_HI3518EV200_50H20PE_AF_8188 50H20PE_AF_18EV200 Link
20973 IPC_HI3518EV200_RA50H20L-S_8188EU_S38 RA50H20L-S_8188EU_S38 Link
20975 IPC_HI3518EV200_RA50HV20_8188EU_S38 RA50HV20_8188EU_S38 Link
22520 IPC_HI3516CV300_50H20L_S38
IPC_HI3516CV300_50H20L
IPC_HI3516CV300_50H20L_S38_AE		 50H20L Link
22942 IPC_HI3516CV300_83H20AF_2812 83H20AF_2812 Link
22946 IPC_HI3516CV300_53H30_FB_8188EU 53H30_FB Link
22968 IPC_HI3516CV300_53H50_FB_8188EU 53H50_FB Link
31520 IPC_HI3516CV300_50H20L_AE 50H20L Link
31942 IPC_HI3516CV300_83H20AF_2812_AE 83H20AF_2812 Link
000319AB IVG-85H20PYA-S 50H20L_SG Link
34997 IPC_LITEOS_HI3518EV200_KA53H20L_S38_HI1131 KA53H20L_HI3518EV200_S38 Link
00035520
B9535520		 IPC_HI3516EV100_50H20L_S38
WIFI_NVR_IPC_HI3516EV100_50H20L_S38_XM711		 HI3516EV100_50H20L_S38
HI3516EV100_50H20L_S38_XM711		 Link
37972 IPC_HI3516AV200_83H80N HI3516AV200_83H80N Link
38510 IPC_LITEOS_HI3518EV201_50H10L_S38_HI1131 50H10L_HI3518EV201_S38 Link
38710 IPC_LITEOS_HI3518EV201_KA50H10L_S38_HI1131 KA50H10L_HI3518EV201_S38 Link
00039840
B9539840		 IPC_HI3516D_83H40_2G_RT3070
WIFI_NVR_IPC_HI3516D_83H40_2G		 HI3516D_83H40_2G
HI3516D_83H40_XM711_2G		 Link
39917 IPC_HI3516D_83H20-FA_AE_2G HI3516D_83H20-FA_2G Link
39922 IPC_HI3516D_82H40AF_AE_2G_RT3070 HI3516D_82H40AF_2G Link
40520 IPC_HI3516EV100_50H20L HI3516EV100_50H20L Link
40983 HI3516EV100_N81820N HI3516EV100_N81820N Link
40985 IPC_HI3516EV100_N80320N HI3516EV100_N80320N Link
41520 IPC_LITEOS_HI3516EV100_50H20L
IPC_LITEOS_HI3516EV100_50H20L.Nat		 LITEOS_HI3516EV100_50H20L_S38 Link
41863 IPC_LITEOS_HI3516EV100_50H30L_S38.Nat.dss LITEOS_HI3516EV100_50H20L_S38 Link
000529B2 IVG-85HG50PYA-S HI3516EV300_85H50AI Link
000559A7 IVG-85HF20PYA-S HI3516EV200_50H20AI_S38 Link
000559B0 IVG-85HF30PS-S HI3516EV200_85H30AI_S38 Link
000559CD IVG-85HF30PS-ST HI3516EV200_85HF30T_S38 Link
Fisheye Platform
12501 IPC_MOZART3C_5020F-S Link
Ambarella platform
4532 AMBARA5S_53A20L Link
4533 AMBARA5S_53A30P_A Link
Xiong Mai Platform
23650 IPC_XM510_50X10 50X10_32M Link
23651 IPC_XM510_53X13 53X13_32M Link
23652 General_XM510_RA50X10_WIFI RA50X10_64M Link
23655 General_XM510_50X10-SW_WIFIXM712
XM510_50X10-SW_WIFINVRXM712		 50X10-SW_64M Link
23657 XM510_RA50X10-C_WIFIXM712 RA50X10-C_64M Link
23658 General_XM510_50X10-SWI_WIFIXM712 50X10-SWI_64M Link
23660 XM510_50X10-SWC_WIFIXM712 50X10-SWC_64M Link
23661 XM510_50X20-SWL_WIFIXM712 50X20-SWL_64M Link
23662 XM510_RA50X20-C_WIFIXM712 RA50X20-C_64M Link
23663 XM510_50X30-SWL_WIFIXM712 50X30-SWL_64M Link
23664 XM510_50X10-SWCL_WIFIXM712 50X10-SWCL_64M Link
23665 XM510_RA50X20_WIFIXM712 RA50X20_64M Link
23666 XM510_50X20-SWC_WIFIXM712 50X20-SWC_64M Link
23668 XM510_50X10-SW-S_WIFINVRXM712 50X10-SW-S_32M Link
23669 XM510_50X10-SWL-S_WIFIXM712 50X10-SWL-S_32M Link
30677 IVG-85X20PS-SV XM530_50X20-HTH_8M Link
30678 IVG-80X20PS-S
IVG-85X20PS-S
IVG-85X20PYA-S
IVG-85X20PYA-SC		 XM530_80X20_8M Link
30679 IVG-85X50PYA-S
IVG-83X50PS-S		 XM530_80X50_8M Link
30682 IVG-80X40PS-S XM530_80X40_8M Link
30695 IVG-80X20PQ-WPN XM530_R80X20-PQ_8M Link
Grain Media Platform
17501 IPC_GM8136S_50V20PL-S 50V20PL-S Link
17502 IPC_GM8135S_50V10PL-S 50V10PL-S Link
17503 IPC_GM8135S_R50V10_8188EU SkipCheck Link
17504 IPC_GM8135S_53V13PL-S 53V13PL-S Link
17505 IPC_GM8135S_R53V13_8188EU R53V13 Link
17508 IPC_GM8135S_R50V10-H_8188EU SkipCheck Link
17535 IPC_GM8135S_RM50V10_8188EU RM50V10 Link

 

DVR Model Platform Link
BLK5008A-S BLOCK5008 Link
BLK5008L BLK5008L Link
BLK5016B-S BLK5016B-S Link
BLK5016T-S BLK5016T-S Link
MBD5504T-B MBD5504T-B Link
MVB5504E-E HVR5506E-S Link
MBD6016E-E
AHB7016T-LM		 MBD6016E-E Link
NBD5504T-FE (NVR) BLOCK5008 Link
MBD6508E
AHB7008T-LM		 MBD6508E Link
MBD6504E MBD6504E Link
EVB6504M-PH MBD6504E Link
DVB6504E-P MBD6504E Link
MBD6024H-S MBD6024H Link
MBD6032E-B MBD6032E-B Link
MBD6024E-B MBD6024E-B Link
MBD6816T-B MBD6816T-B Link
NBD6516H-P NBD6516H-P Link
MBD6004G-PL MBD6016E-E Link
NBD6508H-PL MBD6504E Link
NBD6516H-PL
AHB7808T-LM		 NBD6516H-PL Link
MBD5508T-B SkipCheck Link
MBD5204S-S MBD5204S-S Link
MBD6304T
AHB7004T-EL		 MBD6304T Link
MBD6704T MBD6704T Link
NBD6308T-PL
NBD7008T-PL		 MBD6304T Link
MBD6716T MBD6716T Link
NBD6704T-F MBD6704T Link
MBD6516T-B MBD6504E Link
NBD6516T-F MBD6508E Link
NBD6516H-G MBD6016E-E Link
MBD6704T-E MBD6704T-E Link
MBD6004S-S MBD6004S-S Link
MBD6004Q-H MBD6004Q-H Link
MBD6804T-EL MBD6804T-EL Link
NBD6804T-F
NBD7804T-F		 NBD6804T-F Link
MVB6004D-E MBD6304T Link
NBD6904T-F NBD6904T-F Link
NBD6808T-PL
NBD7808T-PL		 NBD6808T-PL Link
NKB6009D NKB6009D Link
MVB6004L-ES MBD6704T Link
MBD6004G-PL_25930 MBD6004G-PL_25930 Link
MBD6004G-PL_25930_8SDI MBD6004G-PL_25930_8SDI Link
NBD6908T-PL NBD6908T-PL Link
NBD6904Q-FS NBD6904Q-FS Link
NBD7024H-P
NBD7024T-P
NBD7124H-P		 NBD7024H-P Link
MBD6004T_FL MBD6004T_FL Link
NBD7816T-F NBD7816T-F Link
MBD6804T-EH
MBD6808T-EH
MBD6804Q-EH
MBD6808Q-EH		 MBD6804T-EH Link
AHB7008F2-H
AHB7008F4-H
AHB7008F8-H
AHB7016F2-M
AHB7016F4-M
AHB7016F8-M		 AHB7016F-M Link
NBD7816R-F NBD7816T-FS Link
AHB7804T-EL
AHB7808T-EL
AHB7804T-LM
AHB7804R-EL
AHB7808R-EL
AHB7804R-LM		 NBD6808T-PL Link
MBD6516T-EL
MBD6508H-H
MBD6608H-H
MBD6508V-H
MBD6516H-EL
MBD6616H-EL
MBD6505E-PH
MBD6505H-PH
MBD6605H-PH
MBD6509E-PEL
MBD6509H-PEL
MBD6609H-PEL
AHB7008T-LM
AHB7816T-EL		 MBD6508E Link
MBD6516H-H
MBD6016T-H
MBD6616H-H
MBD6516V-H
MBD6509E-PH
MBD6509H-PH
AHB6008T-F
AHB7008T-M
AHB7008T-MH
AHB7016T-LM
AHB7008H4-M
AHB7008H8-M
AHB7016H4-LM
AHB7016H8-LM		 MBD6016E-E Link
MBD6004Q-E
MBD6004Q-H
MBD6008Q-EL
MBD6304T-H
MBD6304T-EL
MBD6308T-EL
AHB7004T-LM
AHB7004T-EL
AHB7008T-EL
AHB7004T-LM-V3		 MBD6304T Link
NBD7804R-F
NBD7804T-F		 NBD6804T-F Link
NBD7804T-PL
NBD7808T-PL
NBD7808R-PL		 NBD6808T-PL Link
NBD7008T-P
NBD7004T-P		 MBD6304T Link
NBD7904R-FS NBD7904R-FS Link
AHB7804R-EL (1G)
AHB7804T-ELS		 NBD6804T-F Link
NBD7804R-F NBD6804T-F Link
NBD7908T-Q NBD7908T-P Link
AHB7808R-LM
AHB7804R-M		 AHB7808R-LM Link
NBD7904T-Q NBD7904T-Q Link
NBD7904T-PL NBD7904T-PL Link
NBD7904T-P NBD7908T-PL Link
NBD8004T-QT NBD8004T-PT Link
AHB7804R-LMS
AHB7804R-LMS-V3		 NBD6804T-F Link
DBD7004E-P MBD6304T Link
AHB7804R-MS AHB7804R-MS Link
AHB7032F-LM AHB7032F-LM Link
NBD8032H-Q NBD8032H-Q Link
AHB7004T-H-V2
AHB7008T-MH-V2
AHB7008T-MH-V3
AHB7016T-LM-V2
AHB7016T-LM-V3		 AHB7008T-MHV2 Link
NBD8008T-Q NBD8008T-Q Link
AHB7004T-MH-V2
AHB7004T-MH-V3
AHB7008T-LM-V2
AHB7008T-LM-V3		 AHB7004T-MHV2 Link
NBD8016H-Q NBD8016H-Q Link
AHB7808R-MS AHB7808R-MS Link
AHB7004T-G-V4
AHB7008T-H-V2
AHB7008T4-H-V2
AHB7016T-MH-V2
AHB7016T-MH-V3
AHB7016T4-MH-V2		 AHB70016T-MH-V2 Link
AHB7008T-LM-V1 AHB7008T-MH-V1 Link
AHB7808R-LM-V2
AHB7808R-LM-V3
AHB7804R-MH-V2
AHB7804R-MH-V3		 AHB7804R-MH-V2 Link
AHB7804R-MH-V5 AHB7804R-MH-V3 Link
AHB7808R-MH-V2
AHB7808R-MH-V3		 AHB7808R-MH-V2 Link
NBD8904T-Q NBD8008T-Q Link
NBD8908T-Q NBD8008T-Q Link
AHB7032F2-LM-V3
AHB7032F4-LM-V2
AHB7032F4-LM-V3
AHB7032F8-LM-V2		 AHB7032F-LM-V2 Link
AHB7808R-MS-V2
AHB7808R-MS-V3		 AHB7808R-MS-V2 Link
NBD7804R-FW NBD7804R-FW Link
NBD7004T-FW NBD7004T-FW Link
NBD8016H-QT NBD8016H-QT Link
MVB7004L-LM MBD6304T Link
NBD8064H-P NBD8064H-P Link
NBD8128H-Q NBD8128H-Q Link
NBD7016T-F-V2 NBD7016T-F Link
NBD7816R-F-V2 NBD7816R-F Link
NBD7804R-PW NBD7804R-PW Link
AHB7804R-MS-V2
AHB7804R-MS-V3		 AHB7804R-MS-V2 Link
AHB7008T-GS-V3
AHB7004T-GL-V4		 AHB7008T-GS-V3 Link
AHB7004T-GS-V3 AHB7004T-GS-V3 Link
AHB7016T-GS-V3
AHB7016T4-GS-V3
AHB7008T-GL-V4		 AHB7016T-GS-V3 Link
AHB7016F2-GL-V4
AHB7016F4-GL-V4
AHB7016F8-GL-V4
AHB7008F2-G-V4
AHB7008F4-G-V4
AHB7008F8-G-V4		 AHB7016F-GL-V4 Link
AHB7804T-MS-V2 AHB7804R-MS-V2 Link
AHB7808T-MS-V2 AHB7808R-MS-V2 Link
NBD7004T-PW NBD7004T-PW Link
NBD8032H-P NBD8016H-Q Link
AHB7016F8-GS-V3 AHB7016F-GS-V3 Link
AHB70016T-MH-V2-720P AHB70016T-MH-V2-720P Link
AHB7032F2-GS-V3
AHB7032F4-GS-V3
AHB7032F8-GS-V3		 AHB7032F-GS-V3 Link
NBD8004T-QW NBD8004T-QW Link
NBD8916F-Q NBD8916F-Q Link
XM-JPN1-W XM-JPN1-W Link
XM-JPN1-RW XM-JPN1-RW Link
NBD8016T-Q NBD8016T-Q Link
NBD8032H-QE NBD8032H-QE Link
AHB7804R-LM-V3 AHB7804R-LM-V3 Link
NBD7008T-PL-V2 NBD7008T-PL-V2 Link
AHB7004T-LME-V3 AHB7004T-LME-V3 Link
AHB7008T-LME-V3 AHB7008T-LME-V3 Link
AHB7016T-LME-V3 AHB7016T-LME-V3 Link
NBD8025R-PL NBD8008R-U Link
AHB7016T-GS-V3-720P AHB7016T-GS-V3-720P Link
NBD7004R-FWS NBD7004R-FWS Link
NBD7004R-PWS NBD7004R-PWS Link
NBD8016R-PL-V2 NBD8008R-PL Link
NBD8008R-PL NBD8004R-PL Link
NBD8008R-YL-EP NBD8008R-YL-EP Link
NBD8008R-PL-EP NBD8008R-PL-EP Link
NBD8004R-PL-EP NBD8004R-PL-EP Link
NBD8004R-PL NBD8004R-PL Link
AHB8008T-GL AHB8008T-GL Link
AHB8004T-GL
AHB8008R-GS		 AHB8004T-GL Link
NBD8004R-YL-EP NBD8004R-YL-EP Link
NBD8008R-PWS NBD8008R-PWS Link
AHB8016T-MH AHB8016T-MH Link
AHB8008R-MH
AHB8016T-LM		 AHB8008R-MH Link
NBD8008T-QV INBD8004T-QV Link
NBD7904T-PL-XPOE NBD7904T-PL-XPOE Link
NBD8004R-FWS NBD8004R-FWS Link
AHB8032F-LM AHB8032F-LM Link
AHB8016T-LME AHB8016T-LME Link
AHB8004R-GS AHB8004R-GS Link
AHB8004R-MH
AHB8008R-LM		 AHB8004R-MH Link
NBD8004R-PE NBD8004R-PE Link
AHB8008R-LME AHB8008R-LME Link
AHB8016F4-GL AHB8016F-GL Link
AHB8032F4-LME
AHB8032F8-LME		 AHB8032F-LME Link
AHB8004R-GS-4PWS AHB8004R-GS-4PWS Link
NBD8032H-UL NBD8032H-UL Link
NBD8908T-PL-XPOE NBD8908T-PL-XPOE Link
NBD8904T-GS-XPOE NBD8904T-GS-XPOE Link

<p>The post Firmware for Chinese DVR, NVR (H.264, H.265) first appeared on NVR IPCAMERA SECURITY.</p>

]]> https://www.nvripc.com/firmware-for-chinese-dvr-nvr-h-264-h-265/feed/ 114 Tpsee Topsee Firmware Software And Tools Download https://www.nvripc.com/tpsee-topsee-firmware-software-and-tools-download/ https://www.nvripc.com/tpsee-topsee-firmware-software-and-tools-download/#comments Tue, 04 May 2021 07:04:34 +0000 https://www.nvripc.com/?p=2150 Topsee Electronic Technology Company, Ltd.is the leading Chinese network surveillance solution and product supplier in China. We have been in the video surveillance industry for a long time and we are also experienced in the IP networking industry. We are the leading provider of network based surveillance products, IP camera technology solutions and professional services to […]

<p>The post Tpsee Topsee Firmware Software And Tools Download first appeared on NVR IPCAMERA SECURITY.</p>

]]> Topsee Electronic Technology Company, Ltd.is the leading Chinese network surveillance solution and product supplier in China. We have been in the video surveillance industry for a long time and we are also experienced in the IP networking industry. We are the leading provider of network based surveillance products, IP camera technology solutions and professional services to the global market, providing the best value for money services and products to our customers.

We have an established in-house research and development capability that drives our program to increase our capability to build our own intellectual property rights for various network video surveillance products in close cooperation with various well known manufacturers such as Texas Instruments (TI), Analog Devices, Inc. (ADI), Sony, OVT, Micron and many more well known enterprises to promote research and development in the field of video processing technology.

 

iPhone Seetong Video Surveillance Client_V6.2.7

 

  • File Type： other
  • Data size： 69MB
  • Language：English
  • Update：2020-04-24
  • License：Free Software
  • Operating environment：iOS 9.0 above
Support all topsee network products.
Note: users through the iPhone/ipod/iTunes into the App Store, search “Seetong” download and install.

 

Android Seetong Video Surveillance Client_V5.9.8

 

  • File Type： other
  • Data size： 30.4MB
  • Language：English
  • Update：2020-04-15
  • License：Free Software
  • Operating environment：Android 4.0above
Support all topsee network products.
Note: users through the Android Phone/Pod/into the Google Play store, search “Seetong” download and install.

 

Seetong PC Client_V1.0.2.2

 

  • File Type： .exe
  • Data size： 8.73MB
  • Language：English
  • Update：2020-01-09
  • License：Free Software
  • Operating environment：Win7/8/10
Support topsee  whole series of network products.

 

UC2 Network Video Surveillance Client_x32_V5.0.1.1

 

  • File Type： .exe
  • Data size： 33.9MB
  • Language：English
  • Update：2017-10-20
  • License：Free Software
  • Operating environment：Win2000/XP/2003/7/8 32bit
Support topsee whole series of network products.

 

UC2 Network Video Surveillance Client_x64_V5.0.1.1

 

  • File Type： .exe
  • Data size： 35.3MB
  • Language：English
  • Update：2017-10-20
  • License：Free Software
  • Operating environment：Win2000/2003/XP/7/8 64bit
Support topsee whole series of network products.

 

VC Surveillance Client_V2.5

 

  • File Type： .exe
  • Data size： 11.17MB
  • Language：English
  • Update：2014-07-11
  • License：Free Software
  • Operating environment：Win2000/XP/2003/7
Support:VM1000/V3000/VM6000/TS9064

 

GC Electric Map Surveillance Client_V2.2(Billing software)

 

  • File Type： .rar
  • Data size： 17.1M
  • Language：English
  • Update：2013-02-20
  • License：Business Software
  • Operating environment：Win2000/XP/2003/7
Support：VM1000/V3000 with GPS display electronic client

 

 

N6G3G_firmware_V1.5.5

 

  • File Type： other
  • Data size： 12.18MB
  • Language：Multi-Language
  • Update：2013-03-15
  • License：Free Software
  • Operating environment：Win2003/XP/2003/9X/7
Support:N6G3G

 

N6C3G_firmware_V1.5.5

 

  • File Type： other
  • Data size： 12.02MB
  • Language：Multi-Language
  • Update：2013-03-15
  • License：Free Software
  • Operating environment：Win2000/XP/2003/9X/7
Support:N6C3G

 

Linux image file

 

  • File Type： other
  • Data size： 3.9GB
  • Language：English
  • Update：2012-07-05
  • License：Free Software
  • Operating environment：Win2003,WinXP,Win2000,Win7
Linux image file

 

TS602T firmwareV1.4.9

 

  • File Type： other
  • Data size： 10.56MB
  • Language：Multi-Language
  • Update：2011-10-11
  • License：Free Software
  • Operating environment：Win2003,WinXP,Win2000,Win9X
Support:TS3T、TS602T

 

TS602S firmwareV1.4.9

 

  • File Type： other
  • Data size： 10.56MB
  • Language：Multi-Language
  • Update：2011-10-11
  • License：Free Software
  • Operating environment：Win2000/XP/2000/9X/7
Support:TS3S、TS602S、TS804S、TS814S、TS824S

 

TS602R FirmwareV1.4.9

 

  • File Type： other
  • Data size： 10.56MB
  • Language：Multi-Language
  • Update：2011-10-11
  • License：Free Software
  • Operating environment：Win2000/XP/2003/9X/7
Support:TS804R、TS814R、TS824R

 

TS850T firmwareV1.4.9

 

  • File Type： other
  • Data size： 10.11MB
  • Language：Multi-Language
  • Update：2011-10-10
  • License：Free Software
  • Operating environment：Win2000/XP/2000/9X/7
Support:TS5T、TS850T、TS852T、TS853T

 

TS850R firmwareV1.4.9

 

  • File Type： other
  • Data size： 10.11MB
  • Language：Multi-Language
  • Update：2011-10-10
  • License：Free Software
  • Operating environment：Win2000/XP/2003/Win9X/7
Support:TS851R

 

 

NVR4.0 User Manual_EN_V2.4

 

  • File Type： .doc
  • Data size： 15MB
  • Language：English
  • Update：2019-07-05
  • License：Free Software
  • Operating environment：Win2000/2003/XP/7
The manual applies to

TS8104A/TS8108A/TS8116A/TS8216A

TS6104C/TS6108C/TS8216C/TS8225C

TS8108D/TS8116D

TS8436M/TS8836M

Series NVR product users.

 

Quick Guide of Seetong Access Cloud NVR V1.4

 

  • File Type： .pdf
  • Data size： 632KB
  • Language：English
  • Update：2019-07-05
  • License：Free Software
  • Operating environment：Win2000/2003/XP/7

 

 

<p>The post Tpsee Topsee Firmware Software And Tools Download first appeared on NVR IPCAMERA SECURITY.</p>

]]> https://www.nvripc.com/tpsee-topsee-firmware-software-and-tools-download/feed/ 63 Basic Setup & Adding Cameras Amcrest https://www.nvripc.com/basic-setup-adding-cameras-amcrest/ https://www.nvripc.com/basic-setup-adding-cameras-amcrest/#comments Sun, 02 May 2021 11:27:31 +0000 https://www.nvripc.com/?p=2053 Basic Setup & Adding Cameras (NVR) There are 2 types of NVR: PoE (Power over Ethernet) Non-PoE (this model has no Ethernet ports on the back panel) Note: If needed, a PoE camera can be setup on a Non-PoE NVR. Please note, since the Non-PoE NVR will not have PoE ports available, the PoE camera will have to be set […]

<p>The post Basic Setup & Adding Cameras Amcrest first appeared on NVR IPCAMERA SECURITY.</p>

]]> Basic Setup & Adding Cameras (NVR)

There are 2 types of NVR:

  • PoE (Power over Ethernet)
  • Non-PoE (this model has no Ethernet ports on the back panel)

Note: If needed, a PoE camera can be setup on a Non-PoE NVR. Please note, since the Non-PoE NVR will not have PoE ports available, the PoE camera will have to be set up on the same network segment as the NVR using a PoE switch or injector. For more information on how to set up a PoE camera, click here.

Power over Ethernet models is used when cameras, that also have the PoE specification, need to be powered by being directly plugged into the NVR’s PoE ports and do not require a separate power adapter to work.

A non-PoE model has no ports for cameras to connect to on the back panel but can add cameras with the built-in scan function that finds cameras connected to the same network. A PoE model can also use this scan feature, but additionally has PoE ports to power its cameras. The scan feature allows for compatible IP cameras to be added from the network whether they are PoE or WiFi.

For the purposes of this guide, the setup procedure will be divided between both the PoE and non-PoE NVR types. Each of these sections will have both a hardware setup and software setup portion.

For more information about what is included with your NVR, click here

PoE NVR

Hardware Setup

  1. Connect an Ethernet cable from your router to the back of your NVR. It will go into the Ethernet port in between the HDMI port and the PoE ports. Make sure the NVR is powered on.
  2. Connect an Ethernet cable from one of the PoE ports on your NVR to your camera. This will confirm that it is powered on.
  3. Connect a VGA or HDMI cable from the back panel of your NVR to a monitor or TV. Make sure that the monitor or TV is set to the correct input (e.g. VGA, HDMI 1, HDMI 2, etc.)
  4. Connect the included mouse to a USB port on the front or back of your NVR.

Note: The network LEDs will start to blink on the back of the NVR when you properly connect the Ethernet cable from there to the router. Any PoE ports on the NVR do not have these LEDs. The same applies to the network LEDs that will begin to blink on the back of most cameras once they’re connected to an NVR’s PoE port.

Software Setup

     1. Please make sure NVR is turned on and then log into your NVR with your NVR’s login credentials. 

     2. Access the NVR’s main menu and go to, Camera in the Management section. In this menu click on the device Search option to search for your device on the network. 

mceclip0.png

     3. Click the Device Search button, and you can view the searched IP addresses at the top pane of the interface. Double click an IP address or check one IP address and then click the Add button to add the current device to the bottom pane of the interface. The system supports batch adding.

     4. Click the Manual Add button to add a device directly. Here you can set TCP/UPD/auto connection mode. The default setup is TCP.

img2.png

Note: The manual add function is for Foscam, Dahua, Panasonic, Sony, Dynacolor, Samsung, AXIS, Arecont, ONVIF, and Custom. When the type is custom, you can input the URL address, user name, and password to connect to the network camera without selecting the network camera manufacturer. Please contact your network camera manufacturer for the URL address.

Non-PoE NVR

Hardware Setup

  1. Connect an Ethernet cable from your router to the back of your NVR. It will go into the Ethernet port in between the HDMI port and the PoE ports. Make sure the NVR is powered on.
  2. Connect a camera to your switch or another router port on the same network as the NVR and make sure it is powered on. The camera must be on the same network for the NVR to connect to it. 
  3. Connect a VGA or HDMI cable from the back panel of your NVR to a monitor or TV. Make sure that the monitor or TV is set to the correct input (e.g. VGA, HDMI 1, HDMI 2, etc.)
  4. Connect the included mouse to a USB port on the front or back of your NVR.

Note: The network LEDs will start to blink on the back of the NVR when you properly connect the Ethernet cable from there to the router. Any PoE ports on the NVR do not have these LEDs. The same applies to the network LEDs that will begin to blink on the back of most cameras once they’re connected to an NVR’s PoE port.

Software Setup

     1. Please make sure NVR is turned on and then log into your NVR with your NVR’s login credentials. 

     2. Access the NVR’s main menu and go to, Setting->Camera. In this menu click on the Device Search option to search for your device on the network. 

mceclip0.png

     3. Click the Device Search button, and you can view the searched IP addresses at the top pane of the interface. Double click an IP address or check one IP address and then click the Add button to add the current device to the bottom pane of the interface. The system supports batch adding.

     4. Click the Manual Add button to add a device directly. Here you can set TCP/UPD/auto connection mode. The default setup is TCP.

img4.png

Note: The manual add function is for Foscam, Dahua, Panasonic, Sony, Dynacolor, Samsung, AXIS, Arecont, ONVIF, and Custom. When the type is custom, you can input the URL address, user name, and password to connect to the network camera without selecting the network camera manufacturer. Please contact your network camera manufacturer for the URL address.

<p>The post Basic Setup & Adding Cameras Amcrest first appeared on NVR IPCAMERA SECURITY.</p>

]]> https://www.nvripc.com/basic-setup-adding-cameras-amcrest/feed/ 41 Default Password NVR – IPCAMERA https://www.nvripc.com/default-password-nvr-ipcamera/ https://www.nvripc.com/default-password-nvr-ipcamera/#comments Sat, 01 May 2021 23:58:01 +0000 https://www.nvripc.com/?p=2021 Default Usernames, Passwords and IP Addresses for Security Cameras Forgotten or lost login credentials information needed to access surveillance systems or individual components is a fairly common occurrence for Security Owners. Specifically, user names, passwords, and IP addresses are all touched on in this article. The information found on this page will be applicable for […]

<p>The post Default Password NVR – IPCAMERA first appeared on NVR IPCAMERA SECURITY.</p>

]]>

Default Usernames, Passwords and
IP Addresses for Security Cameras

Forgotten or lost login credentials information needed to access surveillance systems or individual components is a fairly common occurrence for Security Owners. Specifically, user names, passwords, and IP addresses are all touched on in this article. The information found on this page will be applicable for a wide range of system applications and types (including, but not limited to) smaller residential systems on up to enterprise/commercial systems and even integrators trying to help their customers!

We will warn you that some equipment manufacturers have ‘advanced product lines’ that may include unique login credentials. In these cases, the standard login credentials may not apply. If the default password doesn’t work, try referencing the installation manual specific to that product. These manuals are often found online by searching your particular part number with some light digging into those online search listings you’ll find it. Our A1 service team can provide manuals to you if you are unable to locate them.

Below is a chart that lists default credentials by manufacturer/brand name. If you or someone with access to your system has changed any default values, the default credentials would no longer apply. We recommend resetting the equipment first. We’ve provided reset instructions below; resetting your security equipment is also something our A1 team is happy to help solve. Below is an easily referenced chart for you; hope it helps! Reach out to us if it does not or for any other service needs, you are unable to resolve yourself!

DO YOU
TRUST
YOUR SECURITY SYSTEM?

Do you have issues with it?
Does it have any weaknesses?
Is it capable enough?

USERNAME:
Admin / admin

PASSWORD:
12345 / 123456

IP ADRESS:
192.168.0.100

USERNAME:
admin

PASSWORD:
admin

IP ADRESS:
192.168.1.108

USERNAME:
admin

PASSWORD:
admin

IP ADRESS:
192.168.1.108

USERNAME:
admin

PASSWORD:
12345 / 123456

IP ADRESS:
192.0.0.64

For new models you can reset password via SADP tool.

Please click the link below and follow the instructions on the pdf file.

Hikvision password resetting guide

USERNAME:
admin

PASSWORD:
12345

IP ADRESS:
192.0.0.64

USERNAME:
admin

PASSWORD:
4321

IP ADRESS:
192.168.1.200

USERNAME:
admin

PASSWORD:
111111 / 1111111

IP ADRESS:
192.168.1.200

How tı Reset Ip Cameras

USERNAME:
admin

PASSWORD:
12345 / Model No

IP ADRESS:
192.168.1.30

USERNAME:
admin

PASSWORD:
meinsm

IP ADRESS:
—

USERNAME:
admin

PASSWORD:
admin

IP ADRESS:
192.168.0.100

USERNAME:
ubnt

PASSWORD:
ubnt

IP ADRESS:
192.168.1.20

1- Remove the Ethernet cable 2- Press and hold the control button and insert the Ethernet cable again while holding the control button.
3- Hold the control button until the amber lights turn on. Then release the button .
Wait about 1 minute.
4- When the amber lights turns into the green lights your camera is resetted and your passoword as well.

New Model does not have a default password , but you can reset it to factory settings.
Follow these steps.
1- You can reset the camera by pushing the reset button about 7 seconds.
2- Or you can reset the NVR by removing the battery on the mainboard (not recommended, at your own risk)

USERNAME:
Root

PASSWORD:
Pass

IP ADRESS:
192.168.0.90

USERNAME:
service

PASSWORD:
service

IP ADRESS:
192.168.0.1

USERNAME:
admin

PASSWORD:
1234

IP ADRESS:
192.168.1.7

 

USERNAME:
root / admin

PASSWORD:
root / admin

IP ADRESS:
192.168.1.7

Arecont does not have a default password, but you can reset it to factory settings.
Follow these steps
1- Access the camera’s web interface by typing the IP in your web browser.
2- Under the Administration or System tab, click on Restore to Factory Default.
3- Once the camera reboots, all settings on the camera will be restored to factory default

You can choose your own password after setup.

If you want to reset it

1- Press and hold down the reset button for at least 1 minute.
2- Power on the camera until the red light flashes rapidly Now your camera is back to factory default without any password.

Other Products

Brand User Name Password IP Addressr1

3xLogic

admin

12345

192.0.0.64

Acti

admin

admin

192.168.0.100

American Dynmics

admin

admin

192.168.1.168

Arecont Vision

admin

No Set Password

No Default / DHCP

Avigilon

admin

admin

No Default / DHCP

Axis

root

no set password

No Default / DHCP

Basler

admin

admin

192.168.100.x

Bosch

service

service

192.168.0.1

Bosch Dinion

admin

No set password

192.168.0.1

Brickcom

admin

admin

192.168.1.1

CBC Ganz

admin

admin

192.168.100.x

Cisco

no default

no set password

192.168.0.100

CNB

root

admin

192.168.123.100

Costar

root

root

unknown

Dahua

admin

admin

192.168.1.108

Drs

admin

1234

192.168.0.200

DVTel

Admin

1234

192.168.0.250

DynaColor

admin

1234

192.168.0.250

Flir

admin

fliradmin

192.168.250.116

Foscam

admin

leave blank

unknown

GeoVision

admin

admin

192.168.0.10

Grandstream

admin

admin

192.168.1.168

GVI

Admin

1234

192.168.0.250

HIKVision

admin

12345

192.0.0.64

Honeywell

administrator

1234

no default/DHCP

IOImage

admin

admin

192.168.123.10

IPX-DDK

root

Admin or admin

192.168.1.168

IQInvision

root

system

no default/DHCP

JVC

admin

Model# of camera

no default/DHCP

VideoIQ

supervisor

supervisor

no default/DHCP
Brand User Name Password IP Addressr1

LTS Security

admin

12345

192.0.0.64

March Networks

admin

leave blank

unknown

Merit Lilin

Camera

admin pass

No Default / DHCP

Merit Lilin

Recorder

admin / 1111

No Default / DHCP

Messoa

admin

Model# of camera

192.168.1.30

Mobotix

admin

meinsm

No Default / DHCP

Northern

admin

12345

192.168.1.64

Panasonic

admin

12345

192.168.0.253

Panasonic

admin1

password

192.168.0.253

Pelco

admin

admin

no default/DHCP

PiXORD

admin

admin

192.168.0.200

PiXORD

root

pass

192.168.0.200

QVIS

admin

1234

192.168.0.250

Samsung

root

4321 / admin

192.168.0.200

Samsung

admin

4321 / 1111111

192.168.1.200

Sanyo

admin

admin

192.168.0.2

Sentry360

Admin

1234

192.168.0.250

Sony

admin

admin

192.168.0.100

Speco

root

root

192.168.1.7

Speco

admin

admin

192.168.1.7

StarDot

admin

admin

no default/DHCP

Starvedia

admin

no set password

no default/DHCP

Toshiba

root

ikwb

192.168.0.30

Trendnet

admin

admin

192.168.10.1

UDP

root

unknown

unknown

Ubiquiti

ubnt

ubnt

192.168.1.20

W-Box

admin

wbox / 123

192.0.0.64

Wodsee

root

leave blank

unknown

Verint

admin

admin

no default/DHCP

Vivotek

root

no set password

no default/DHCP

<p>The post Default Password NVR – IPCAMERA first appeared on NVR IPCAMERA SECURITY.</p>

]]> https://www.nvripc.com/default-password-nvr-ipcamera/feed/ 38