For this system, there will be some optional way to reset the password, please kindly find which way is suitable for you.

Here are the methods to reset the password.

1. Please contact technical support to get the general super password according to the system date displayed on your monitor.

2. Can you see a “?” on the login page,? If yes, please refer to this link to find the key number and send it to technical support, and then please don’t turn off your DVR.
After technical support gets your code, the agent will generate a super password for you.

3. Can you see a small QR code after you input the wrong password 5 times? If yes, please click it and make it enlarge, and then please send the full and clear picture of this QR code to the technical support. After the technical support gets your picture, the agent will generate a super password for you.

4. If the above method all not suitable for your case, please kindly note that can you see some prompt message on your login page, such as
“System maintenance, please contact the installer, SN: XXXXXXXX“. If it is in this case, please kindly send us a clear picture of this prompt message window, and then please inform us of the system date displayed on your monitor. After we get your pictures, we will inform you how to do it for the next step.

XMeye – How to Change the System’s Password?

The system’s default password is blank(nothing). We suggest you change the system‘s default password when you hook up the system for the first time to protect your privacy. Below are instructions on how to change the password.

Here are the steps:

1. Use the system’s user name admin and default password blank to log in system.

2. Right click mouse and select the Main Menu

3. Go to advanced

4. Go to Account

4. select admin and click Modify Pwd

5. Input the new password and confirm it. Since the old password is the default password which is blank, leave the old password box blank.

Click OK to save.

XMeye – How to Use Security Questions to Reset Your System’s Password?

Steps:

1. Please go to this login interface and tick the ‘?’ option.

2. You will see these are two Security Questions like the picture below shows. And please input the Answers and then tick OK.

3. Then the system will automatically pop up this interface like the picture below shows. You can input the new password that you want to set up.

4. Then, there is a message shows Modify Password Successfully.

<p>The post XMEYE Devices Password Reset New Method first appeared on NVR IPCAMERA SECURITY.</p>

This article applies to all older models of recorders and the following new recorders: N841, N842, N843, N861.

Part 1 – Call our Technical Support

Step 1. Locate and retrieve your recorder’s Device ID. In most cases, the Device ID is printed on a label on the top or side panel of the recorder along with the QR Code (see image below) NOTE: The Device ID is NOT the Serial Number.

TIP: There are three ways of retrieving your recorder’s Device ID or QR Code:

1. As mentioned above, you can locate the Device ID on a label on the top or side panel of the recorder.
2. You can also see Device ID by going to your recorder’s app (i.e., go to Settings > Device Info).
3. Finally, using a monitor and a mouse, you can retrieve the Device ID by accessing the Info Page of your recorder (i.e., right-click on mouse, then click Info (see image below).

Step 2. Once you have the Device ID at hand, call our Technical Support at 1-888-425-6739 and ask for a temporary password so you can access your recorder and reset the password.

Part 2 – Log in to your recorder using the temporary password

NOTE: For this procedure, you must (1) connect a monitor to your recorder using an HDMI cable, and (2) connect a mouse to one of the USB ports of your recorder.

Step 1. Right-click on the mouse, then click Main Menu.

Step 2. Now, log in to your recorder to open the Main Menu (see image below). You will need to provide the following credentials:

• Username: admin (default)
• Password: Use the temporary password provided to you by the Technical Support

Click OK to proceed.

Step 3. On the Main Menu, click Settings (see arrow on the image below) > System > Account > User.

Step 4. In the User Settings, click Modify.

Step 5. Then, configure the following settings:

• User: admin (default)
• Modify Password: Check the box
• Old Password: Enter the temporary password provided to you by the Technical Support
• New Password: Enter your new password
• Confirm Password: Re-enter your new password

At the bottom of the screen, click OK to save your changes.

NOTE: Now, make sure to keep your new password in a safe place for future use.

Congratulations! You have successfully reset your password.

<p>The post Lorex – How to reset the password DVR NVR All Model first appeared on NVR IPCAMERA SECURITY.</p>

http://en.jovision.com/en/techsupport/business.shtml

fill in the blanks with your information and click next and input the ERROR CODE, then we will provide you with a temporary account

Note: The temporary account will become invalid in 2 days. Therefore, please change your user name and password once login with the temporary account. Jovision technical support provide this to help user operate the products, Jovision don’t bear any legal liability.

FOR IP CAMERA:

To get error code, you need install JNVR client (http://edown.cloudsee.net/down/JNVR.exe), search and add the camera in device management, you can get the error code:

You can get this error code directly on NVR if the camera is connected to a NVR

Then go to our website to get the temporary account.

When you get the temporary account, you should use this account to connect the camera and then change the password for user: admin or you can also create a new user. Then use the account you just modified to connect the camera. Here is the instruction on how to change password.

Connect the camera in PC client, right click on the live video, click “Remote setting”, and the dialog box appears. Click “System”.

Click “User Setting” tab, select user “admin” and click “Modify”

Input new password twice to confirm, click OK, then the password has been changed. You can also click “Add Account” to create a new account.

If you connect the camera on a NVR system, you should input the temporary account to connect the camera first. Right-click menu—IP camera—double-click the added camera you want to change pwd. And input temporary account, the camera can be connected now.

then right click on the camera live video–remote setup– General–User,  change the password for user: admin or you can also create a new user.

Last but not least, use the account you just modified to connect the camera.

FOR NVR/DVR

When you get the temparory account, login the NVR/DVR system with this account. And right-click menu—system setup—General—User, select the user and change the password, or create a new user.

Go back to main menu—quit – log out. Then login with the account you have changed the password.

<p>The post How to reset IPC.NVR.DVR password Cloudsee NVSIP ADVR first appeared on NVR IPCAMERA SECURITY.</p>