VOSKER V300 Ultimate Camera Setup and User Guide

HOW TO UPDATE YOUR V300 ULTIMATE CAMERA FIRMWARE

VOSKER V300 Ultimate
.

Latest firmware released: January 23, 2024

Installation instructions for PC :

Installation instructions for MAC :

How to Install your V300 Ultimate Camera

Before installation

Verify:

What you’ll need for installation

Choose between:

Recommended installation – Camera

Recommended installation – Universal Solar Power Bank

For more information on how to install your VOSKER camera to get the best picture quality, read the article “What Can I Do To Increase My Photo Quality?”.

Download:

› Quick Start Guide (PDF)

Troubleshooting steps:

If the Universal Solar Power Bank is discharged, charge it by plugging the DC power adapter in the 5 V IN port.

CAUTION:

WARNING: Failure to follow these safety instructions may result in fire, electric shock, damage, or other injuries. This power pack is not a toy. Keep away from children and operate outside.

.

HOW TO INSTALL YOUR V300 CAMERA

Before installing your camera, we recommend that you test the coverage of the location you will be placing your camera. Consider using a VOSKER security box to protect your V300 security camera against theft and breakage.

Here are some of the best practices for installing your VOSKER camera:

Note: Make sure to place the camera in an area that gets a good amount of sunlight during the day (enough to cover 50% of the solar panel). This will help maximize the battery life of your camera.

For more information on how to install your VOSKER camera to get the best picture quality, read the article “What Can I Do To Increase My Photo Quality?”.

.

HOW TO ACTIVATE MY V300 CAMERA?

Before activating your camera:

Note: A 24-hour charge of the battery unit is recommended before the first-time installation.

Activating your camera with VOSKER mobile app:

Activating your camera with the VOSKER web app:

Turning your camera on:

The V300 powers on and secures a strong signal.

Note: There may be a 20-120 seconds delay for the camera to make the first communication or transfer the first photo/video to the app.

EVERYTHING YOU NEED TO KNOW ABOUT V300 LIVE STREAMING

A strong cellular signal on both devices will ensure smooth live streaming.

The V300 series offers the amazing feature of live-streaming as a 40-minute add-on that can be shared between compatible devices over a 12-month period.

Want to test it out first? Upon activation, every V300 includes two minutes of live streaming during the free seven-day trial period.

How to start a live-streaming

What is the difference between live-streaming and 10-second Full HD video?

The live-streaming allows you to see what is happening live around your camera. It can last as long as you have live-streaming minutes in your account. It is great when you receive a notification, and you want to check if there are still some movements.

Your camera stores a 10-second Full HD video on the servers at every detection. You can request the video to understand better what happened during the detection. Simply click on a photo and press the button “Request Full HD video”.

What is the impact on the battery life?

The more you use those features, the more it takes a toll on the battery life.

This is especially true if the V300 doesn’t get a steady and strong signal. Just like your cell phone, the camera will work harder to connect to the cellular tower and communicate information.

If you see the battery life dropping, consider adding the Universal Solar Powerbank to sustain your camera from 6 to 12 months.

How to buy additional live-streaming minutes?

You can easily purchase a live-streaming add-on which will add 40 minutes shareable among all VOSKER streaming devices for the next 12 months.

Mobile app:

Web app:

Warning: you need a transmission plan (Base, Alerted or Elite) before buying the live-streaming add-on.

.

<p>The post VOSKER V300 Ultimate Camera Setup and User Guide first appeared on NVR IPCAMERA SECURITY.</p>

How to add a Hikvision NVR to Hik-Connect

Before you start…​

Part 1: Enable Hik-Connect on the NVR…​

.

.

.

.

Part 2: Set up Hik-Connect on your mobile phone or tablet…​

.

.

.

Part 3: Add the NVR to your Hik-Connect account…​

.

.

.

Other tips…​

Guides for Hikvision NVRs with V5 firmware

How to set up motion detection and alerts on a Hikvision NVR

What is Motion Detection and why is it useful?​

Motion detection is one of the easiest events to set up and will notify you as soon as a person or vehicle enters a predefined detection zone in your scene. Traditionally, it would just rely on lots of pixels changing between frames in your camera’s video stream, which would indicate movement in the scene.

Of course, this would cause lots of alerts for things you are not interested in, such as animals, moving plants and rain. Hikvision’s Acusense cameras and NVRs now have something called Motion Detection 2.0, which cuts the false-positive detections right down as will only notify you when people and/or vehicles are in the scene by learning what they look like. In this simple step-by-step guide, we will show you how to get motion detection set up on the new NVR 5.0 web interface.

Step 1: Go to your NVR’s Motion Detection configuration page…​

Step 2: Configure your Motion Detection zone and rules…​

​

Quick tip…​

If you find that the camera preview is too small when drawing your detection zones, you can switch the view to full screen by clicking on the Full screen (four arrows) button in the toolbar, and then exit full screen by pressing Esc on your keyboard.​

Step 3: Set the arming schedule to specify when you want Motion Detection active…​

​

Quick tip…​

If the 30-minute segments are not precise enough for you, you can finely tune a period of arming or disarming by double-clicking on the segments and specifying your start and end times in minutes using the arrows.​

​

Step 4: Set what you need the NVR to do when a camera detects a target…​

How to connect an IP camera to a Hikvision NVR

Adding cameras to your Network Video Recorder (NVR) is a crucial step in any CCTV setup. Not only does it allow you to store and access all your camera recordings in one place, but it also simplifies camera configuration. In this simple step-by-step guide, we’ll show you how to add cameras to a Hikvision NVR using the new NVR 5 web interface.

.

Why add cameras to an NVR?​

.

Before you start…​

Before anything, to be able to add your IP cameras, you need to make sure that:
.

.

How to add your cameras using the V5 GUI…​

Step 1:​

Open a web browser and enter the IP address of your NVR in the address bar. If you are not sure what this is, use the SADP tool to find it.​

Step 2:​

Log in to the NVR using the “admin” username and password you have set on it.​

​

Step 3:​

Go to: Device Access > Device Configuration > PoE Settings​

​

If you are connecting your camera via the Plug-and-Play method, then make sure that Network Camera Plug-and-Play is enabled on the POE port you will be connecting the camera to on this page.​

​

For any camera with a cable run under 100m, leave the Network Cable Distance as Short Distance.​

​

If you are connecting your camera manually by IP address, disable the Network Camera Plug-and-Play option for the channel that you plan to add the camera to.​

Step 4:​

Go to: Device Access > Device > Video Device​

​

For any Plug-and-Play camera, just make sure that it is in its inactive default state and then connect it to the port you reserved in step 3. After 20 seconds or so, the camera Status should turn to Connecting and then Online (you may need to click on Refresh to see this).​

​

For Manually added cameras, if you can see the camera in the List of Online Devices section, then just tick the box for the camera and then click + Add to Device List, which will then automatically add it to one of the channels you disabled Plug-and-Play on in the last step.​

Alternatively…​

Click on +Add at the top of the page and fill out the fields as follows:​

​

IP Address: Enter the IP address of your camera, using the ‘Test’ button to verify there is a camera at that address. ​

Device Name: This can be anything you like, as it is the name the camera will show with on your NVR. ​

Protocol: Select the camera’s manufacturer from this list, or failing that, use the ONVIF protocol (your camera will need to have ONVIF enabled for this to work). ​

Management Port: Enter the Server port set on the camera, which you can find in the SADP tool or in Network>Basic Settings>Port in the camera’s web browser interface. If you haven’t changed this, it is usually 8000 by default. ​

User Name: “admin” or the username of any other users set up on that camera. ​

Password: The password set with that user on the camera – if this is the same as the ‘Default Activation Password‘ you have set on the NVR, then you can tick this box instead. ​

Transfer Protocol: ‘Auto’ is normally best. ​

​

When these are completed, click OK.​

​

Your camera should then appear in the list of devices with an assigned channel, and an Online status, meaning it has been successfully added.​

.

Extra tips…​

Source : https://www.use-ip.co.uk/forum/forums/guides-for-nvrs-with-v5-firmware.71/

.

<p>The post Guides for Hikvision NVRs with V5 firmware first appeared on NVR IPCAMERA SECURITY.</p>

How about you? It can happen for everyone to delete the videos from their system unexpectedly. We are here to share details and needed information about retrieving deleted videos from your Dahua system and explain some system features.

Can I retrieve deleted CCTV.

How do you review and save the videos in Dahua NVR?

We are here to tell you how to review and copy the recorded video in the Dahua NVR setup system. In the first step, you need to go to the menu option, so perform right-click anywhere on the screen to view the menu option. On the opened screen, you see the items below:

An important feature is available on the Dahua NVR system: the automatic systems are good features on these devices. Dahua NVR system cannot only record the videos but also back up the recorded videos.

In case of saving the videos, there will be a wireless option in the NVR system. Various devices can be connected to an NVR USB slot to save the videos. Connect one of these devices and right-click the mouse on the screen to open the menu. You can search for the demanded video date and time.

 ..

How to download recorded video files to USB on Dahua NVR?

It is good to know how to download some recorded footage you want to view on your PC or laptop. The first thing to do is go to the main menu. It may ask you for your password first, so you must enter it.

You will see the backup option. Click Backup. When you go to the backup option, it immediately shows you something connected to the USB. In this case, the process offers you a USB drive connected to your NVR system’s back.

There is a USB port on the back of the NVR system and a USB port on the front. You can use either one of these USB ports. According to the manual, it can connect to an external hard drive and the USB port.

Some users needed help connecting to the USB port with the larger hard drives. Based on this information, we recommend you use a thumb drive if you have one. You can insert your thumb drive into the USB port, and there will be a pop-up window.

In this step, you can access the back file too. You will have 2 methods available. You can either go via the menu or put your thumb drive in. Go to the backup menu. You can file the backup. Both methods lead you to the same backup screen.

It is also to see the used or free storage of your device. It is possible to format the drive to make the storage lighter. Be careful because it is straightforward to format the drive suddenly.

 .

How to backup video from the NVR system to USB?

We want to tell you how to backup video from your NVR system to a flash drive or USB drive on a system running. This is one of the most practical features of the Dahua CCTV system, similar to other security camera systems.

Various systems use features similar to the NVR system. The first stage is logging into your system typically. There will be some boxes, and you can see the cameras on those boxes.

Then, right-click to go to the main menu. In this step, you need to enter your password. Then is the time to go to the backup option. You will see your USB drive name if you have plugged it into the NVR system.

You have to connect your USB drive directly to NVR, and then you can check the storage condition. It is possible to browse and select where to save the recorded files on your drive.

You can also format the drive if it is brand new or a drive with files on it, and you don’t want to keep any existing files. You can go to the format and perform the format step to bring it back to the new state with nothing.

After formatting, you will not need to choose the exact place for your recorded video. You only need to go back to the browse and select the folder. It is vital to check out the type of video. What kind of video are you trying to search for?

Do you want to search for an alarm, a motion, a motion and alarm, a general video, and an intelligent one? What stream do you want to search for? Typically, the mainstream is useful and practical for everyone.

Getting back up from videos in NVR

In case you need to get the backup, you need to consider the start and end times. You have to select the time of the demanded day. In this case, you can click the search button and observe your record channel.

You can decide which camera you want to pull the video by checking this channel. It can be easy if you are looking only at one particular camera. But if you are looking at multiple cameras, you have to select 3 or 4 or even all.

Generally, getting the backup is a relatively easy task, but it is better to get help from intelligent experts in this field of activity. The good news is getting backup is possible in the NVR system, so you don’t need to be worried about the deleted or lost videos.

 .

How do you access the lost or deleted videos in Dahua NVR?

This part will explain the detailed steps to recover smashed videos from Dahua NVR systems. It would help if you double-click to open the NVR video data recovery software.

You can use the top and best software module for NVR. It is time to start the process. In the first step, you have to know the image file of Dahua. Then, select the image file and select the partition.

Next, you can use deep analysis to detect the NVR brand. You will see the NVR spot list. Sometimes, as the user, you are unsure about the NVR brand, so you can click the analysis mode directly to recognize the NVR system.

Finally, you can find out the main program has recognized 2 possible brands for the available image file. Usually, you have to select the top one. Finally, click the demanded one and click the OK.

It is also possible to rename the task and click OK. You can overwrite the existing task if you have worked with these features before. Can you find out the detectable dates?

You can detect the demanded video within these available dates and then analyze them. It is also a good idea to check the analysis speed too. You have to wait until the analysis process is completed. The remaining time is available for you to see and observe.

Besides the recorded videos, you can also face the raw videos with extension names. Remember that you must wait because the whole process of analyzing and video carving is automatic. So you don’t need to do anything.

Check the log and the file window. After completing the analysis, you can switch to the file window and find all possible cameras and a long list of videos.

 .

How do we recover the deleted videos from the Dahua NVR system?

According to the previous part and the access method of recorded videos in the NVR system, recovering these lost videos will be relatively easy. You only need the analysis mode of the Dahua NVR system, and for this analyzing process, you have to use deep analysis.

If this step and process don’t work as you want, you can select the device and try the custom analysis to set up another task. You also can try to put a name with custom. To tell the difference between each task, like fast analysis, deep task, and custom task, you must know all the available options in the NVR system.

Usually, you can use the deep or custom task for the Dahua NVR system. Finally, you can switch back to the directory or log window. You will the witness of the almost complete progress.

The digital experts mostly use the online checksum, and they have the read-only option in the setting. You can tick the demanded one to ensure it is the original device with the read-only option.

Not any of the proper operations can affect the original devices. Another available option is adding checksum options. These features show why many people need digital engineers.

The standard data recovery engineers can help you if you find your lost video. Some users believe they don’t need the expert because ticking the other checksum options is much easier.

The analysis speed will become slower than the average speed. Finally, you can check channel one of your camera and see the recovered lost videos. You can also watch the preview video, which is useful and practical.

 .

How do we retrieve the deleted video from NVR?

Time is the main thing when trying to retrieve the deleted recorded video. Whenever you realize you have lost your videos, preventing the NVR from overwriting the deleted video is essential.

Note that recording and storing the new videos can decrease the chance of a successful retrieval. In addition, you have to check the backup storage. This feature can help you recover the lost or deleted video.

Some NVR systems have an automatic backup feature, which helps you retrieve lost and deleted videos. If you cannot recover the lost data, contact your NVR system’s technical support.

These experts can provide the best guidelines and information to retrieve your lost footage. You only need to share the details of your NVR system, its software version, and the type of video you lost.

There is another available option to retrieve the deleted video. You can use the recovery software of the NVR system. This software can support you retrieve the deleted video as soon as possible.

You must follow the instructions mentioned to utilize the software quickly and promptly. This software is compatible with the NVR system. It can also be practical in the installation process of the NVR system.

Don’t forget to get help from a professional assistant in this field of activity. These persons can help you in a unique process using the most advanced tools and devices.

Final thought

Deleting helpful videos from NVR can be harmful, mainly when the video contains important content. Based on the mentioned information, it is possible to recover and retrieve the deleted or lost videos from the NVR system.

This article has mentioned all the steps and processes of deleted video recovery. We also share some information about the backup process in the NVR system. You have to check the highlighted process and consider the chance of a recovery process.

Finally, retrieving is only sometimes an easy method for everyone, but you can experience the recovery process with the help of different available devices and options. Don’t worry about your deleted video; you can retrieve it easily via the NVR system. We’re Dahua UK Authorised partner providing Dahua products with the best price only for trade users.

.

<p>The post Can I retrieve deleted CCTV footage from my Dahua NVR first appeared on NVR IPCAMERA SECURITY.</p>

Troubleshoot Offline Camera

Troubleshoot Offline Camera

Learn how to troubleshoot when a new Verkada camera is offline

Updated over a week ago

Use this article to read through some common scenarios and try the suggested troubleshooting tips to help. If you still need help, please contact Verkada Support.

What is the LED status of the camera?

Camera has been solid orange for over 10 minutes

Camera is blinking blue for over 5 minutes

Camera is solid blue for over 5 minutes, says “waiting to be connected on Verkada Command”

Roles and Permissions for Cameras

Roles and Permissions for Cameras

Learn about the roles and permissions available for Verkada Cameras

Updated over a week ago

This article describes the set of roles and associated permissions for Verkada Cameras.

Org-level roles

Organization-level roles are configured on a per-user basis. Groups cannot be used to set organization-level roles.

Below, click the down arrow to the left of the role to learn more about the role and access.

Org Member

Org Admin

Verkada Cameras Troubleshooting 2024

Site-level roles

Site-level roles can be assigned to individual users or to groups and pertain to a specific site or subsite. Subsites inherit the permissions from the subsites and parent sites above them.

No Access

Site Live-Only Viewer

Site Viewer

Site Admin

CP52-E PTZ permissions

The CP52-E PTZ camera permissions determine who can manage the Sentry Mode feature.

Permissions model (example)

Here’s a simple example of a permissions model that a typical organization with several sites and users may employ:

Users and their required level of access

Permissions each user should be assigned

.

Set Org Admin permissions

Revoke Org Admin permissions

Set site and subsite permissions

You can set site and subsite permissions by adding a user, a group, or by existing users and groups.

Add a user

Add a group

Existing users and groups

You can set the site and subsite permissions for existing users and groups by managing the user roles or the sites.

Manage roles

Manage sites

Customize roles and permissions

Verkada’s Roles & Permissions Customization feature enables Org Admins the ability to add or remove certain permissions from Site Admins and Site Viewers more granularly. Some organizations may want to limit or extend the permissions of the members of their organization based on their needs. Currently, we allow customization of permissions related to archives, link sharing, and user management.

Roles and Permissions for Command

Roles and Permissions for Command

Learn about the roles and permissions available to Command users and groups

Updated over a week ago

This article describes the set of roles and associated permissions for Verkada Command. It also explains how to customize roles and permissions.

Permission levels

Permissions are set at the following levels:

Daha fazla göster

Permissions considerations

Common user permission configurations

Daha fazla göster

Roles and permissions by Verkada product

.

Org-level roles

Org-level roles are configured on a per-user basis. Groups cannot be used to set org-level roles.

Org member

Org Admin

Access Control Role

.

Site-level roles

Site-level roles can be assigned to individual users or to groups and pertain to a specific site or subsite. Subsites inherit the permissions from the subsites and parent sites above them.

No Access

Site Live-Only Viewer

Site Viewer

Site Admin

Access Site Admin

.

Customize Roles and Permissions

Verkada’s Roles & Permissions Customization feature enables Org Admins the ability to add or remove certain permissions from Site Admins and Site Viewers more granularly. Some organizations may want to limit or extend the permissions of the members of their organization based on their needs. Currently, we allow customization of permissions related to archives, link sharing, and user management.

FAQ

Why has my organization disappeared?

Why are cameras missing from my organization?

Why can’t I access certain features or settings, such as other users?

Resolve Issues with Missing Cameras

Resolve Issues with Missing Cameras

Learn how to resolve issues when cameras are missing from your Verkada account

Updated over a week ago

When you log in to Verkada Command, you can only access cameras and video in organizations or sites where your user account has permissions.

Note: Even if you are an Org Admin, you still need to grant yourself permission to view all sites. Learn more about roles and permissions for cameras and Command.

If you log in to Command and cameras are missing or have disappeared, always check user permissions. The most common reason cameras are not visible is that your user account needs permissions to the site(s) where the cameras are configured.

Common reasons that can cause cameras to disappear

Check permissions

If you are an Org Admin, you can check and correct your own permissions:

Resolve Issues with Night Mode

Resolve Issues with Night Mode

Common issues with IR and Night Mode with steps to resolve them

Updated over a week ago

Each Verkada camera has night vision capabilities, using a sensor to detect low-light situations. When external lighting is low, the camera switches to night mode and records in black and white, using infrared (IR) LEDs to illuminate the environment. If the IR is emitted improperly through the dome or reflected into the lens, it negatively impacts image quality.

Common night mode issues

It is imperative that the dome remain free of debris and the camera is installed properly to achieve the best image quality. When viewing footage in night mode if the footage appears obscured it is most likely the result of one of the following scenarios:

Camera always in night mode

If your camera is always in night mode even where there is sufficient light in the environment the lux (light) value may need to be adjusted. If this is the case, reach out to Verkada Support for further assistance.

Environmental obstruction

If the camera is mounted too close to a wall, ledge, or light source, the image quality may be degraded due to IR reflection.

Recommendation. Ensure that cameras are mounted sufficiently far away from surfaces that may cause the IRs to reflect, such as light sources.

IR obstruction

If a first-generation Dome camera (D30 or D50) is operating in night mode when there is plenty of light, the IR sensor is likely obstructed by the camera housing.

To fix the obstructed light sensor, physically rotate the lens barrel assembly 180° so the sensor and IRs are visible through the camera case.

Example: Proper and improper orientation

Note: After rotating the lens barrel, the camera orientation may need to be changed in Command.

<p>The post Verkada Cameras Troubleshooting 2024 first appeared on NVR IPCAMERA SECURITY.</p>