Introduction
When you are away home, there are always something you care about. This is where the smart camera functions. No matter your child is climbing
the kitchen cabinet, or the pet is stealing snacks, the Pan/Tilt Home Security Wi-Fi Camera helps you stay with them anytime, anywhere. Receive a
notification whenever your camera detects motion and see a video clip of this motion to check everything.
• Smooth Pan and Tilt – 360° horizontal range and 114° vertical range.
• 1080p High -Definition – Capture every detail in crystal-clear Full HD definition.
• Advanced Night View – Even at night, the camera can provide a visual distance of up to 30 ft.
• Live View – Always stay with that matters most to you from anywhere, anytime.
• Two-Way Audio – Communicate with others with the built-in microphone and speaker.
• Sound and Light Alarm – Trigger light and sound effects to frighten away unwanted visitors.
• Privacy Mode – Shut down the surveillance to protect your privacy.
• Sharing – Share the memorable moments with your family and friends.
• Safe Storage – Store up to 128 GB on a microSD card*, equal to 384 hours (16 days) of footage△
.
*The SD card is not included in the package.

<p>The post Tapo Home Security Wi-Fi Camera Setup Guide first appeared on NVR IPCAMERA SECURITY.</p>

1. Please download the APP iCsee from Google Play or APP Store
2. Then, please connect the 2.4GHz wifi on the mobile phone.
   Note:
   When configuring the wifi for the camera, the APP will pick up the wifi automatically, and it won’t allow the users to change it. Thus, please make sure the mobile phone is connected to the wifi you want to configure for the camera.
3. Please use an email address or a mobile phone number to register the APP.
   • Firstly, please click Sign Up on the APP
     
   • Then, please input the username, password, email address/phone number, and the verification code and click Sign Up:
     
4. Next, please log into the APP by using the username/email address/mobile phone number:
   
5. After login the APP, please click the screen to add the camera:
   
6.  Next, please click Set Up My Device To Wi-Fi:
   
7. Please input the wifi password of your wifi network:
   
8. Next, please click the QR code icon and click I see, and put the QR code to face the camera lens part so that the camera could scan the QR code:
   
9. Next, please set up a password and a name for the camera.
   Note:
   The password is very important. When you share the camera with other users, you also let him/her know the password, so please keep the password.
   If you forgot the password, please reset the camera to the factory default settings.
   
10. Finally, the camera will be added to the APP successfully, and you could view it on the APP:
    

<p>The post How to Add the Camera to APP iCsee? first appeared on NVR IPCAMERA SECURITY.</p>

Description

This article will explain setting up a fixed camera on motion detection to trigger a NVR to move a PTZ to a preset.

Prerequisites

• Dahua IP camera (motion detection capability)
• Dahua NVR or HDCVI DVR (both cameras added)
• Dahua Network PTZ (with at least 1 preset)

Video Instructions

Step by Step Instructions

1. Log into the NVR.

2. Select setup.

3. Select Event -> Video Detection then select the Enable checkbox. Make sure period and region are set up correctly and trigger appropriately. Now check PTZ Activation and then select setup.

4. On the channel with the PTZ select the preset function and then type in the preset and then select OK.

5. Now select OK to Successfully saved! and wait 1 minute.

6. Go ahead and test this solution!

How to Setup Scan

Description

The Scan feature allows you to set a predetermined path from Point A to Point B

Prerequisites

• Dahua Network PTZ
• IP Address of Network PTZ
• Internet Explorer

Video Instructions

Step by Step Instructions

1. Login to your IP Camera via Internet Explorer.

2. On the right hand side click, “PTZ Settings” and make sure, “Scan” is selected in the dropdown menu.

3. Using the PTZ Controls, move the camera into the starting position, and click, “Set Left”

4. Move the camera to the second position, and click, “Set Right”

5. To test the results click, “Start”

How to Setup Preset

Description

Pre-sets are used to define single or multiple locations that are saved to the camera’s internal memory. Pre-Sets are used in conjunction with the, “Tour” feature.

Prerequisites

• Dahua Network PTZ
• IP Address of Network PTZ
• Internet Explorer

Video Instructions

Step by Step Instructions

1. Login to your IP PTZ camera via Internet Explorer.

2. On the right hand side, under, “PTZ Settings” click the drop down box and select, “Pre-Set”

Note:For this example, we are going to set Pre-Set 1 and 2. These numbers can be set from 1-80. The number of Pre-Sets available can vary from model to model.

3. Move the PTZ to the location you wish to set for Pre-Set 1 using the PTZ Controls.

4. Press, “Add”

5. Move the PTZ to the second location that you wish to establish for Preset 2 using the PTZ Controls.

6. Change the Pre-Set number to, “2” and click, “Add”

7. To test, change the Pre-Set back to, “1” and click, “Go to” then repeat for each additional Pre-Set you created.

How to Setup Tour

Description

The Tour feature allows you to set a up multiple locations for the PTZ to cycle through using already established Pre-Sets.

Prerequisites

• Dahua Network PTZ
• Internet Explorer
• IP Address of Network PTZ

Video Instructions

Step by Step Instructions

1. Login to your IP PTZ camera via Internet Explorer.

2. Under, “PTZ Settings” click the drop down, and select, “Tour”

3. The box immediately below the drop down is the, “Pre-Set Number” This can be set to 1-8 (May vary by model) Ensure that this is currently set to, “1”

4. In the second box, input the first Pre-Set you wish to establish and click, “Add Pre-Set”

5. In the second box, input the second Pre-Set you wish to establish and click, “Add Pre-Set” Repeat this process for any additional Pre-Sets you wish to use.

6. Once complete, you can test your Tour settings by clicking, “Start”

How to Setup Pattern

Description

The Pattern feature allows you to set a predetermined path to multiple locations, and adjust Zoom, Focus, and Iris as the camera moves between positions.

Prerequisites

• Dahua Network PTZ
• Internet Explorer
• IP Address of Network PTZ

Video Instructions

Step by Step Instructions

1. Login to your IP Camera via Internet Explorer.

2. On the right hand side click, “PTZ Settings” and make sure, “Pattern” is selected in the drop down menu.

3. Click, “Add”

4. Move the camera to the location you wish the pattern to begin, and press, “Start Rec”

5. Move the camera to each location, one by one. Once complete, press, “Stop Rec”

How to Setup Light Wiper

Description

The Light Wiper feature allows a PTZ equipped with a Wiper to remotely clear moisture from the lens.

Prerequisites

• Dahua Network PTZ with light wiper
• IP Address of Network PTZ
• Internet Explorer

Step by Step Instructions

1. Login to your IP Camera via Internet Explorer.

2. Under, “PTZ Settings” click the drop down box and select, “Light Wiper”

How to Setup Goto

Description

• Go to: This feature allows the PTZ to travel to a specific location based on coordinates.

Prerequisites

• Dahua Network PTZ
• IP Address of Network PTZ
• Internet Explorer

Video Instructions

Step by Step Instructions

1. Log into your PTZ camera

2. In the lower right corner select PTZ settings, and then drop down the first menu and select “Go to”

3. Notice you have several fields for the Go to function, the first field is Horizontal Angle (pan) which will point the camera on the horizontal axis in a 0.0° to 360.0° range using increments of 0-3600. Notice 0 and 3600 are the same location, if you want to point in a direction 90.0° enter 900, if you want the opposite side of that (270.0°) use 2700.

4. The second field is your Vertical Angle (tilt), which has a range of 0-900 or 0.0° to 90.0°. 900 tilts directly downwards from the PTZ’s mounting point, while 0 tilts horizontally.

5. The third field is your Zoom function which works in a range of 1-128.

How to Setup Pan

Description

The Pan feature allows the PTZ to move between two pre-established horizontal points.

Prerequisites

• Dahua Network PTZ
• IP Address of Network PTZ
• Internet Explorer

How To Setup Pan Video

Step by Step Instructions

1. Login to your IP Camera via Internet Explorer.

2. On the right hand side click, “PTZ Settings” and make sure, “Pan” is selected in the drop down menu.

3. Click, “Start”

<p>The post PTZ Camera How To Setup step by step first appeared on NVR IPCAMERA SECURITY.</p>