Lorex Camera Troubleshooting

How should you go about troubleshooting the Lorex camera? Be methodical about it. Experiment and see which of the possible reasons is causing your cam to act up. Most issues can be solved in a DIY fashion, thankfully.

See More Articles

• How To Resetting Passwords on Lorex IP Cameras
• How to Lorex devices firmware updates
• Lorex Client Software and Mobile Apps All Model

When troubleshooting the Lorex camera, you should be methodical about it. Experiment and see which of the possible reasons is causing your cam to have issues with its video feed, app connection, and other features. Most issues can be solved in a DIY fashion, thankfully.

Without further ado, let’s discuss lorex camera troubleshooting. Let’s find ways to make sure your surveillance devices are always up and running when all is said and done

My camera is showing itself as offline on my NVR. How to Fix!

The DVR/NVR system assists in making it easier to keep tabs of the live feed and the status of the cams. If your connected Lorex cam is displayed as “offline” on your NVR, it might be because of an issue with the NVR’s internal settings or it might instead be a cable connection issue.

You can fix this by restoring your NVR to factory settings if it’s called for.

Fixing an Offline Lorex Camera with a Direct Connection

Check the port connections if your offline cam is connected directly to the back of the NVR. To do this, switch ports of an offline camera with an online camera.

If the offline cam displays itself as online when plugged into another port and the online cam becomes offline on the other port then it’s a port issue. This indicates that your NVR port settings should be restored to default or factory settings.

• LHV/LNR Series DVR/NVR: To restore this NVR model, right-click “Live View” to get to the “Quick Menu”, click the “Main Menu”, click the Setting Icon, click “Setting” then “Default”, and check the menus you wish to restore to default settings.

Click “Apply” to save changes then click “OK” to exit the menu.

• ECO Series DVR/NVR: To restore this NVR model, right-click on “Live View” to access the “Quick Menu”. Click the Main Menu icon (a house) the click “Advanced”. Click the “Maintain” tab and then go to “Load Default”.

Select the menus you wish to restore to factory settings or click “All” to restore the entire system. Click “Apply” then “OK” on the Warning Window. Click “OK” to return to the menu and “Exit” to return to the previous menu. Reboot the DVR for the changes to take effect.

• LNR200/LNR300 Series NVR: To restore this NVR model, right-click “Live View” then click “Menu”. Afterwards, click “Maintenance”, “Default”, and then “OK” to auto-reboot the NVR and restore the device to its factory settings.
• LHA/LNK Series DVR/NVR: To restore this NVR model, go to the Taskbar and click, the Main Menu icon (a house). From there, click the “Advanced”, “Maintenance” option, and the “Maintenance” tab. On the tab, click “Load Default”.

Select the menus you wish to restore to factory settings. Click “Save” to confirm then restart your NVR for changes to apply.

If this doesn’t fix your offline camera this might mean hardware failure. Contact Technical Support for assistance and potential replacement if the cam is under warranty.

Fixing an Offline Lorex Camera with a PoE Switch Connection

If your offline cam is connected to a Power over Ethernet (PoE) switch (that’s also linked to your router) then you might need to reconnect the cam to your NVR.

• Reconnect and Disconnect: To reconnect your camera on an LHV/LNR Series NVR, disconnect then reconnect the cam to the switch. Make sure the switch is linked to the same router as your NVR.
• Menu Navigation: Now right-click “Live View” to get the “Quick Menu”. Now click “Device Search”. Login the NVR with your login info. The default username and password is in your user manual.
• Device Search: After clicking Device Search, your NVR will search the network it’s connected to for any IP cameras. It’ll then display them on the top half of the Remote Device window.
• Select Camera: Select the camera you wish to reconnect to on the window then click “Add”. Enter the password of the cam (also in your user manual). The cam appears on the window’s lower half.
• Green Status: After a few moments, the status should turn green. This indicates the cam has been successfully added to the NVR.

How do you restore an IP camera to default settings?

Make sure the cam is connected to your NVR through the Ethernet cable. Press and hold the reset button located at the base or back of the camera. While holding this button, disconnect and reconnect the Ethernet cable.

This should make your cam go back to factory settings and restart for good measure. The camera should start operating normally after the restart. However, because it’s back to factory settings, you’ll need to reconfigure the system and put in your custom settings from before.

Frequently Asked Questions

Here are some frequently asked questions about Lorex cams.

Why is my Lorex camera not working?

Usually, it’s because your cam has lost power or has power supply issues. It might have a loose or faulty video cable or the power adapter might be disconnected. To fix this, check the point of contacts for your camera, recorder, and monitor or TV.

Why is my Lorex camera offline?

If on your NVR the connected camera is shown as offline, it could be an issue with the cable connection or the NVR’s internal settings themselves. If your offline Lorex cam is connected directly to the back of the NVR check the ports and the cables for damage and potential replacement.

How do I get my Lorex camera back online?

The easiest solution to get your Lorex cam back online (aside from power-cycling your router or modem) is by reconnecting the device to your Lorex home app. Launch the app, go to “Settings”, “Wireless Network”, and then follow the on-screen connection guide to get your cam working.

Why are my Lorex cameras not working?

Loss of power is the most common reason why security cameras go black. It happens when power adapter is disconnected and cable that connect the camera to the recorder and monitor becomes loose and faulty. To fix the issue, we recommend that you check any point of contact on your camera, recorder, and monitor.

How do I reset my Lorex camera?

To reset the IP camera to default settings:

1. Ensure that the camera is connected to the NVR via an Ethernet cable.
2. Press and hold the Reset button on the back or base of the camera.
3. While still holding the Reset button, disconnect and reconnect the Ethernet cable.
4. The camera will reset to defaults and then restart.

Why is my Lorex camera offline?

If a connected camera is showing as Offline on your NVR, it could be related to an issue with the internal settings of your NVR or a cable connection problem. If the offline camera is connected directly to the back of your NVR, check the port connections.

How do I get my Lorex camera back online?

Reconnect your device to the Lorex Home app.

Once you have powered on your device and restarted your router, you can reconnect your device to the Lorex Home app. To reconnect to the Lorex Home app, launch the Lorex Home app > tap Settings > Wireless Network > then follow your device’s on-screen connection guide.

What causes security cameras to stop working?

Why does video loss happen in security cameras or systems? Most of the time, the issue of video loss on CCTV security cameras, DVR or NVR, is caused by several factors: network issues, bad power supply, cabling problems, defective hardware, bugs on the camera’s software, IP address conflicts, bad configurations, etc.

Why are my security cameras not working?

Reboot the security camera

Reboot the device. Rebooting your security camera will release its cache to flush, re-calibrate the settings, and revise connections. Directly unplug the security camera from its power supply then wait for a few seconds before plugging it again. This will reboot it.

Where is the reset button on my security camera?

How to Reset Your Security Camera

How do I reset my security camera?

How to reset IP Camera to factory defaults

1. Keep the device powered on for at least 30 seconds to complete its normal startup.
2. Find something like a pin to press the Reset button on the camera and hold it for 15 seconds to restore the settings to factory defaults.

How do I reset my camera?

After the power cable plugged keep holding the reset button . The red PowerLED light will flash on for 3 second first, turn off for about 15 seconds, flash on for another second and turn off again. This procedure takes around 20seconds and camera will power up. Release the reset button.

Why does my security camera Say no signal?

One of the most common problems when a camera is not displaying video is a bad cable or BNC connection. Using a test monitor, you can temporarily eliminate the power and video cable that your camera is using.

How do I reset my Lorex PTZ camera?

To restore the camera to default settings:

Press and hold the reset button below the camera module for at least 10 seconds. While still holding the reset button, disconnect and reconnect the Ethernet cable. Hold the button for 15 seconds before releasing.

How do I connect my Lorex security camera to Wi-Fi?

How To Set Up Lorex Wi-Fi Connected Wireless Home or Baby …

Why do security cameras go black?

Some users experience CCTV camera black screen or video going black at night, it’s likely that the camera lacks infrared night vision, or the IR night vision camera doesn’t have an IR cut filter or a faulty IR sensor, or you simply forget to turn the IR on. Quick Fixes: Check camera settings to make sure the IR is on.

What happens if you unplug a security camera?

When your house, the cameras won’t record. When you are away from the home, the cameras record. They’ll still be “working” but not recording.

Do security cameras go bad?

Once your security camera system is in place, the cameras typically fade into the background quite quickly. After a few weeks, you might not even notice they’re there. That’s not an issue on its own, but it does mean that you need to be intentional about keeping an eye out for wear and tear on the cameras.

How long does a security camera last?

In general, most security camera footage is kept for 30 to 90 days (1 to 3 months the most).

Why is my security camera flickering?

CCTV Cameras can Flicker due to Lighting or Electrical issues. Some lightbulbs can operate at a frequency that will cause the camera viewing it to flicker. The frequency of power being sent to the camera can be incompatible and also cause flickering. Insufficient power is another possible cause.

How do I reset my Lorex NVR?

How to Reset Factory Default Settings to your Security Video Recorder

How do I reset my NVR to factory settings?

To factory reset the device, hold the reset button down and unplug the NVR from power. Once power is removed from the unit, continue holding the factory reset switch for 4 – 5 seconds, continue holding the reset switch and plug the power supply back into the unit. You should hear a beep if not that is alright.

How do I reset my Cove outdoor camera?

If you are resetting your Cove Indoor Camera (the smaller camera with a black base), use a small paper clip or something narrow to press the button in the reset hole. The reset hole is located on the back of the camera in the top left corner next to one of the screw holes. It will have the words “Reset” next to it.

Does a factory reset delete everything?

Factory resets aren’t perfect. They don’t delete everything on the computer. The data will still exist on the hard drive. Such is the nature of hard drives that this type of erasure doesn’t mean getting rid of the data written to them, it just means the data can no longer be accessed by your system.

What happens if I reset my camera?

The Reset Default or Camera Settings function only resets the shooting settings of the camera to their default settings.

Ultimately

Most Internet issues root from the router itself requiring a reset or a power-cycle. Most issues involving the features of the cam root from power supply or insufficient power. It also involves a lot of default settings resets.

Troubleshooting is a lot easier to accomplish than you’d think. You just need to read the instructions carefully and zero-in on the cause of the problem. This way, your Lorex smart camera should be able to seamlessly stream video and ensure the safeness of your home.

How to Reset Lorex Camera?

How do you reset the Lorex cam? Does it involve pinhole or pushbutton reset button? How long are you supposed to push the reset button? Can you use your app to do the reset?

The decades-old Lorex brand is a well-established company in the security technology industry. It offers topnotch, professional, and consumer-grade security systems for commerce and residences as well as homes, apartments, and offices.

How to Reset Lorex Camera

Some Lorex IP Cameras include a reset button found on the device itself. You can do manual reset with the button in order to restore the cam to default or factory settings (i.e., the settings it has fresh off its box). In order to reset your Lorex Cam to factory or default settings, do the following.

• Make sure the cam is connected care of Ethernet cable to the NVR.
• Press and hold the reset button by your finger on the base or back of the camera. It varies from model to model.
  • You might have to take off the housing in order to access this reset button as well.
  • Scan through your cam’s user manual in order to find out the specific location of the reset button on your model of Lorex camera.
  • You can also avail of documentation and downloads for your device on the Lorex website.
• While still holding and pressing the reset button, disconnect the Ethernet cable then reconnect it soon after. Don’t let go of the button for 15 seconds afterwards.
• Release the button and check if the camera resets to defaults and restarts. The restart process will take a couple of minutes to complete.

The camera should work normally after the reset and restart. However, you’ll need to input your customization settings and reconfigure everything when all is said and done. If the reset isn’t successful, retrace your steps and attempt it again.

What Does the Lorex Camera Brand Bring to the Table?

The Lorex cam brand offers some quality products, such as its Ultra HD 4K 8-Channel Security System. It includes various high-end video cameras that connect with each other. It’s also a proper example of the best that the Lorex brand offers.

No Mandatory Monthly Fees and Optional Cloud Service

There’s a lot to like about the camera line. For instance, you don’t need monthly fees for it to work. You don’t have to worry about long-term contracts or fees that require cancellation in case you wish to switch to another provider.

The only costs linked to this package deal were the initial cost of the equipment and a fee for premium cloud storage (optional). It’s not like other products that emphasize cloud storage fees as a requirement for their products to work decently.

High Video Quality

You have 4K video quality, which means even a single frame screenshot reveals quite a lot in terms of what’s happening before the camera. You’re likelier to recognize faces, prevent blurs and obfuscation, and identify what you’re looking at in high-quality footage.

It’s no antiquated bank security camera with fuzzy footage. Everything is as clear as day and akin to real-time footage you’d see in a live-feed of a sports event like the Super Bowl.

People/Vehicular Detection

It’s also quite the advanced camera network or system due to its vehicle and people detection. More to the point, it has advanced motion detectors that alert you when there’s movement on your party by people or vehicles.

This prevents false alarms involving small animals or moving branches. The A.I. of the system detects only people and vehicles instead of pets or wildlife such as raccoons and squirrels.

Because you’re monitoring everything via smartphone, tablet, or some other mobile device, this feature eliminates unnecessary (and annoying) push notifications.

The Installation Process

The installation process of the Lorex camera system can get involved and complex, like in the case of its reset process. There’s no option for professional installation help from Lorex. You might have to hire a general third-party handyman to do it for you.

This is especially disadvantageous to any user that doesn’t have any technical expertise or DIY know-how when it comes to installing equipment.

Monitoring Limits

The system requires you to monitor things on your own through the Lorex app. This is mostly fine, but other systems feature 24/7 monitoring for consumer-grade or even industrial-grade use.  You have to call for help in the event of an emergency yourself.

It’s not like other systems that call emergency services like the police, an ambulance, or the fire department for you. It’s not necessarily a deal-breaker for most, but for those looking for 24/7 CCTV monitoring might get disappointed.

The Specifications of the Lorex Camera 4K Ultra HD

The Lorex Ultra HD 4K 8-Channel Security System allows you to avoid monthly fees completely with a fully functional camera system that doesn’t require the cloud storage in order to work. This is because it boasts of local storage through a hard drive.

To wit, it comes with the following specifications:

• Local storage through hard drive.
• 18 LED infrared sensors for night vision.
• Its recording type is motion-activated recording.
• It offers 10 gigabytes of free cloud storage as well.
  • The free plan extra features include 3 RapidCaps per month.
• Optional expanded cloud storage subscription for all-access mobile video.
  • The Lorex Cloud Premium monthly plan only costs about $4.
  • The Lorex Cloud Premium yearly plan only costs $35.

Don’t Forget to Keep This in Mind

If you wish to reset your IP camera to default settings, you need it to be connected to your NVR through its Ethernet cable. You should then press and hold the reset button found at the base or back of the cam. Afterwards, connect and disconnect the Ethernet cable while still holding the button.

From there, wait 15 seconds more before releasing the reset button. This allows the device to return to factory settings then restarting when push comes to shove. The specifics of resetting the cam have been made this complex to prevent accidental resets when you don’t need to do a reset.

References:

1. “IP Cameras: Restoring default settings“, LorexTechnology.com Help, Retrieved February 28, 2022

How to Connect Lorex Camera to Phone?

How do you connect your Lorex Cam to your smartphone? Through the smartphone app of Lorex, of course. Keep on reading to find out the rest of the details and the steps needed to accomplish this task.

The makers of Lorex Cameras are continuously evolving and adding new products in their lineup. They’re not a stagnant brand at all. They’re all about beefing up their tech to compete in the competitive security cam market.

They even have an Ultra 4K camera system included in their lineup of Wi-Fi or IP surveillance camera solutions that outdo 2K or 1080p offerings.

How to Connect Lorex Camera to Phone

Here’s what you should do to connect your Lorex Camera with the Lorex Home App. Once app connection is established, you’ll be able to control your Lorex camera with your phone.

• Open the app known as Lorex Home first.
• Go to the “Devices” screen and Tap the icon labeled “Add Device”. This will add your Lorex Camera to the app and thusly to your smartphone.
• Scan the QR code on your Lorex Wi-Fi cam using your smartphone as well.
  • If your phone can’t scan the code, tap the option, “Manually Enter Device ID”.
  • Make sure the LED is flashing green and you hear the camera startup chime.
• Let your Lorex Home App establish a Wi-Fi connection via your camera.
• Now you’ll be given a prompt to enter a secure password for the device. Set a strong password.
• Choose the Wi-Fi network from the list of available networks on the area then enter the Wi-Fi password to make that connection.
• Once more, make sure that you hear a camera chime and the LED has become a solid green. After this happens, tap “Next”.
• Make a name or label for your Lorex cam/device by selecting a list of predefined names. You can also enter a custom name on the indicated text box if you wish.
• Tap “Complete” to finish the process.

You’ve now successfully connected your Lorex Wi-Fi cam to your phone via the Lorex Home application. Congratulations.

Why Should You Make the Switch to Lorex Security Cams?

Lorex faces stiff competition against Ring, Blink, Nest, Arlo, ADT, and Wyze as well as hundreds of other “lesser” known security cam companies such as Reolink, Yi, AmCrest, Swann, SimpliSafe, Danale, Foscam, Geeni, HikVision, and Hive.

However, Lorex has several aces up their sleeves, including their crowning achievement of an Ultra HD 4K camera system that outdoes even bank CCTVs and their fuzzy videotape recordings. Their cams also showcase video displays from day to night as well as platform integration, audio features, and more.

How to Connect Lorex Camera to Phone?

More about the Lorex Brand and Its 4K Offerings

You can find tons of beefed-up security system options with Lorex on its homepage. You might even feel overwhelmed by the options. Instead of offering smart devices, they’ve really zeroed-in on security cam tech.

You can shoot 2K or 4K with the Lorex brand. It even offers wireless outdoor cameras to boot. However, its head-turner of a product remains its Lorex Ultra HD 4K 8-Channel Security System.

To wit, the whole package offers the following:

• 1 Mouse
• 1 HDMI Cable
• 4 Mounting Kits
• 1 Security Decal
• 1 Ethernet Cable
• 1 1-TB Hard Drive
• 5 Power Adapters
• 1 Quick Start Guide
• 4 60-Foot BNC Cables
• 4 Ultra HD 4K Cameras

All that’s missing is 3 French hens, 2 turtle doves, and a partridge in a pear tree! It will really feel like Christmas when you unbox this monster of a package deal.

Why Ultra HD Makes Perfect Sense for Security

Because Lorex is faced with so many home security systems in the market, it naturally pushed the technology to 4K video quality. However, some might question whether this was a wise decision or not. Isn’t 1080p Full HD enough to reveal face details or plate numbers?

Isn’t 4K video overkill? The present industry standard for Nest and ADT is 1080p. The highest quality video for smart security cams is actually 4K but many consumers question if it’s required.

By our estimation it does help in long-distance shots and capturing detailed footage of intruders when the motion detection is triggered, especially for the Lorex 4K Ultra HD 8-Channel Security System.

The Pros and Cons of the Lorex Security Cam Brand

It was reported back in 2018 that the global smart home security market was valued at $2.14 billion. It was expected to grow up to $4.37 billion this year in 2022, and even the pandemic shouldn’t slow down its growth. If anything, it might’ve pushed more people to invest in smart cam security!

Aside from the 4K Ultra HD 8-Channel Security System, Lorex has a hose of cameras in its arsenal. These products pack some serious security power in their own right, but they have some drawbacks you should watch out for too.

Pros:

• No contracts and monthly fees.
• The app experience is buttery smooth.
• Local storage via 1TB hard disk and the like.
• Its color night vision offers long-range coverage.
• Free cloud storage and optional expanded cloud storage.
• There are lots of equipment and building options aplenty.
• All models offer HD video quality in 720p and 1080p (up to 4K in some of them).

Cons:

• Cheap Lorex packaging.
• Limited customer service hours.
• It’s hard to navigate the Lorex website.
• Dealing with occasional false alarms and notifications.
• Some might feel like Ultra 4K HD quality footage is overkill for surveillance.

Ultimately, Lorex cameras are worth a look even over the ever-popular Ring or Arlo cams because of the company’s sheer focus on these devices. They’ve found a way to make Ultra 4K security footage possible and relatively cost-effective for its quality. That’s no simple feat to accomplish!

Never Forget the Following

To connect your phone to your Lorex Wi-Fi cam, 4K cam, or wireless cam, you need it to connect to the Lorex Home mobile app. This shouldn’t be a problem since all Lorex products use mobile devices in order to operate them, with your smartphone or tablet doubling as their remote controls.

You’ll need to add the device to the app, scan a QR code or manually enter the device ID, setup a password for your account, connect to your home Wi-Fi, and name your device to separate it from the other devices integrated with the application.

How to Connect Lorex Camera to Wi-Fi?

Lorex cams are powerful cameras with reliable technology and no monthly fees. With that said, how do you connect the Lorex Cam to your Home Wi-Fi exactly?

Lorex cams might not have the name recognition achieved by Ring cams from Amazon and Nest cams from Google. However, they have many other things going for them, such as staying in power. The famous Canadian brand that’s making their splash stateside has been around for quite a while.

Regardless, let’s learn to connect the Lorex camera to wifi down below. We’ll also discuss Ethernet connections to NVR, restoring the camera to factory settings, and the things that make Lorex products stand out.

How to Connect Lorex Camera to Wi-Fi

Here’s how you can go about connecting or changing the Wi-Fi provider of your Lorex Camera. This process works whether you’re setting up your Lorex cam for the first time, right out of its box, or if you’re switching from one Wi-Fi connection to another.

• Activate the camera hotspot by pressing the reset button once.
• Open the Lorex Home App. Go to “Device Settings” by tapping onto it.
• Scroll down the menu then select “Wireless Network”. Tap “Next” afterward.
• Tap “Join” once you get a prompt to join the Wi-Fi network.
• Wait for your device to connect to the Device Hotspot.

Restore Your Lorex Camera to Factory Settings

In order to reset your camera to default or factory settings like it’s fresh off of the box it came with then you should do the following:

• Look for the reset button. Depending on the camera, it could be located at the base or back of the camera.
• Press and hold this reset button for 10 to 15 seconds or until you hear the chime indicating that the camera has undergone the reset process.
• Look below the lens for the flashing green light. This indicates whether the cam has fully reset and restored factory defaults or not.

Why Does the Lorex Camera Say It’s Offline?

You might need to simply reset or power cycle your router (turn it on and off) until the connection returns. If it’s an issue with the camera itself then that’s what the reset function is for. Go ahead and reset the camera to see if that puts your cam back online.

If your connected Lorex Cam claims you’re offline on your NVR, it could be an Internet connectivity issue, internal settings of your NVR, or an Ethernet cable connection problem.

If your offline camera has a direct connection to the back of the NVR, check the ports for damage or a loose connection. Or you can restore your NVR to default settings in order to see if that fixes the issue.

Things That Make the Lorex Camera Stand Out

The best of the best of the cream of the crop of Lorex Camera products—Lorex Ultra HD 4K 8-Channel Security System—has a lot going for it.

It’s able to take on rivals like Amazon’s Ring Cams or Google’s Nest Cams because of features like its exceptional video quality up to 4K, commercial-grade quality and construction, and several custom recording options.

Furthermore, Lorex Wireless camera batteries last for 4 months of regular use. While this might sound short compared to other devices that have batteries that last 6 months, those devices tend to get to the 6-month figure by putting their cams on the lowest settings.

What More Can Be Said of 4K Quality?

Writing about how good a camera’s audio and video doesn’t do it justice. Instead of just using your imagination, look for good video reviews on the Lorex camera, particularly their best offerings like the Lorex Ultra HD 4K 8-Channel Security System or the Lorex Wireless Camera.

Their best cameras offer Ultra HD 4K or better than the standard 720p HD or 1080p Full HD of other camera brands like Amazon Ring or Google Nest. They showcase a detailed video display worthy of a Super Bowl livestream or the latest Marvel superhero movie.

In security and surveillance terms, everything becomes more detailed. The faces of would-be burglars or package thieves will be revealed or the license plate number of their escape vehicle would be exposed.

Lorex Camera Customer Service

You can get to the Lorex Cam customer service from Monday to Saturday from 11:00 AM to 10:00 PM Eastern Standard Time. You have to wait if you get problems with your system outside of those hours. Thankfully, its website has an FAQ, help desk, and support for common issues and glitches.

The reset button option, by the way, covers most connection and account access issues even though it can get quite annoying having to reconfigure your cam or set of cameras every time.

The Global Home Security Market

According to recent reports, the global home smart security market has gotten a value of $2.14 billion in 2018 and is estimated to grow to $4.37 billion by 2022 (this year).

The demand for Wi-Fi or IP cams has only grown during pandemic times even though no reports are forthcoming exactly because we’re dealing with Covid-19. People want to feel safe and secure even when they’re stuck at home during lockdown.

As lockdowns get lifted and everyone starts going back to their offices, they also want to keep an eye on their empty houses with the ease of a mobile app.

Even When Faced with Stiff Competition

Even when faced with stiff competition from Ring, Blink, Nest, Arlo, and Wyze, Lorex finds a way to outdo them in more ways than one (particularly in terms of offering 4K Ultra HD cameras versus their 1080p or 720p offerings).

They might have name recognition, the backing of industry giants like Google and Amazon, and a large market share. However, more and more people are becoming more aware of consumer-grade Wi-Fi cameras and using smart devices for security and surveillance purposes.

Never Forget

Never forget that to connect your Lorex Camera to your Wi-Fi, you need to press the reset button once (don’t press and hold, just press it) to activate the hotspot of the camera. Open the Lorex Home app, tap “Device Settings”, scroll down, tap “Wireless Network”, and tap “Next”.

When you get the prompt to join the Wi-Fi network, tap the “Join” option and then wait for your device to connect to the “Device Hotspot”. You’re now all good.

<p>The post Lorex Camera Troubleshooting first appeared on NVR IPCAMERA SECURITY.</p>

Amazing Features, Top 2 Picks, Setup Steps & Hottest FAQs

Blue Iris Cameras is a smart tool used by a lot of people to access and control their security cameras. In this complete guide, you’ll get deep insights into Blue Iris software, the recommended Blue Iris compatible cameras, step-by-step setup guides, and troubleshooting.

If you have other questions about Blue Iris supported cameras, leave them in the comment below.

Table of Contents

• Blue Iris Cameras: Features & Compatible Cameras
• Blue Iris Compatible Camera Top Picks
• Set up Blue Iris Cameras: Step-by-Step Guide
• Troubleshooting for Blue Iris Cameras
• Frequently Asked Questions about Blue Iris
• Conclusion

Load more :

• Blue Iris IP Camera Software Setup Guide
• Troubleshooting Physical Cameras in 3 steps

Blue Iris: Software Features, Compatible Cameras, and Pricing

In order to help you get as many details as possible on Blue Iris webcam security cameras, we will break down this topic into 4 parts and every part will contain the points you want to learn about.

1. Meaning

2. Compatible cameras

3. Pricing

1. What is Blue Iris software

Blue Iris, or BI for short, is a popular video security and webcam software that enables people to remotely access and control their security cameras on personal computers, iPhones, or Android smartphones.

Blue Iris has many configurable options, including remote live view, playback, PTZ control, motion detection, audio recording, E-mail alerts, and many other functions.

With Blue Iris compatible cameras, you can keep tabs on your home and business, watch your kids & pets, and monitor your valuables via this professional software.

The advantages of Blue Iris mainly include:

• You can control multiple security cameras & systems simultaneously from various brands on Blue Iris.
• As an open platform, Blue Iris welcomes all companies and organizations.
• Blue Iris captures videos in various formats, including standard MP4, AVI, advanced DVR, and Windows Media.

Keep in mind that not every security camera is completely compatible with Blue Iris, you need to check the compatibility details or ask the security camera manufacturer before making a purchase.

2. Blue Iris compatible cameras

Most security camera types in the market are compatible with Blue Iris, including webcams, analog cords, and network IP cameras.

According to the test done by the Blue Iris team, there are thousands of tested security cameras that are compliant with Blue Iris, so it’s hard to give a full list.

But there are some clues for you to know whether your camera is compatible with Blue Iris. If your camera belongs to any of the following ones, it can work with Blue Iris. If not, you can contact the camera manufacturer to find the answer.

• Any camera that supports JPEG images
• Any camera that supports MJPEG streaming
• Any camera that supports MPEG4 over RTSP streaming
• Any camera that supports ONVIF protocol

Here are several popular Blue Iris compatible camera brands:

• Reolink (except its battery security cameras, add-on cameras, E1, and Lumus)
• Amcrest
• Hikvision
• Dahua

Sometimes not all the functions of a compatible camera can be used on Blue Iris. So you need to check the details of Blue Iris compatibility from the security camera brand.

Reolink team has tested the compatibility of their cameras with Blue Iris. The result is that Reolink security cameras can “communicate” with Blue Iris in almost every way. In other words, you can make full use of Reolink cameras on Blue Iris software.

3. Blue Iris license & tech support fees

You’ll need to pay for the license and tech support when using Blue Iris software, which is licensed per PC for a lifetime.

Before purchasing the Blue Iris license, you can get a free 15-day trial. After that, you’ll need to pay for the usage of Blue Iris.

There are two versions of the Blue Iris license for you to choose from:

• The LE version only supports a single camera at a price of $34.95.
• The Full version supports multiple security cameras (up to 64 cameras), at a price of $69.95.

If you want to manage multiple security cameras at one time or plan to expand more cameras in the future, the full version would be a much more cost-saving option in the long run.

Also, you’ll need to pay for the tech support of Blue Iris. You’ll get 1-year basis support plan for free. When your basic support plan expires, you’ll need to upgrade it to an Extended Plan ($29.95/year) or a Priority Plan ($59.95/year).

Blue Iris Support Plan Details & Prices

Support Plans & Features	Basic	Extended	Priority
Current Version Updates	Yes	Yes	Yes
Major Version Upgrade Protection	—	Yes	Yes
Email Support	Yes	Yes	Yes
Prioritized Email Support	—	Yes	Yes
Highest Priority Email Support	—	—	Yes
Phone Support (Limited & By Appointment)	—	—	Yes
Remote Desktop Support (Limited & By Appointment)	—	—	Yes
Price	Free	$29.95	$59.95
Duration	1 Year	1 Year	1 Year

Note : The information in the chart above is quoted from Blue Iris official website.

For people who don’t want to pay so much for using Blue Iris software, the customized software of the security camera manufacturer (such as Reolink App) would also be a good choice.

You can use the software without any charges and get free tech support. More importantly, there is no need to worry about the compatibility of your cameras and the software at all.

Best Cameras for Blue Iris Recommendations

We pick two popular Blue Iris compatible cameras, including a PoE and a wireless type, for your reference. Both of these two security cameras are highly praised by professional tech reviewers and customers.

This camera features 4K 8MP ultra HD, enabling you to see details in the picture clearly. 5X optical zoom lets you check anything you like freely. Besides, RLC-811A can detect any person & vehicle and send instant alerts to your phone.

You can make use of almost all the functions of RLC-811A on Blue Iris software. Once you enter the IP address/port, Blue Iris can instantly pick up the camera.

This PoE camera can save you from messy hassles and bring solid security to your home. With rich features, it’s at a reasonable price. If you want a 4K PoE camera for Blue Iris, give it a try.

For those who are looking for a PTZ (pan-tilt-zoom) camera for Blue Iris, E1 Outdoor can be a great choice.

This wireless outdoor security camera is packed full of features and at a nice price. It offers you 5MP high resolution at 2560 x 1920 pixels, person/vehicle detection for accurate alerts, and color & clear night vision with 12 IR LEDs and 4 extra spotlights.

More importantly, it has the amazing PTZ function. You can view nearly everything with 355° pan & 50° tilt, and check details closely with 3X optical zoom. This camera can also track the moving person/car automatically.

This PTZ security camera is fully compatible with Blue Iris, which has a PTZ/Control dialog for you to customize settings. If you want to know more, here is a thorough guide to BI’s PTZ/Control for your reference.

Blue Iris Camera Setup: Step-by-Step Guide & Videos

Some people may have trouble adding a new security camera to Blue Iris. You can follow this step-by-step guide on adding IP cameras to Blue Iris and control your cameras like a breeze.

Here we’ll take the compatible OEM cameras as an example, and the steps apply to other types of cameras that are compatible with Blue Iris.

Step 1. Initialize the camera settings

1). Add the camera to Reolink Client. You can add it by entering UID or IP/Domain address. Also, it will show you devices in the same LAN and you can click the “+” button to add it.

2). Set up User Name (the default user name is admin) & Password. Click Login.

3). If you’re going to use ONVIF or RTSP later on Blue Iris, you need to set the port first on Reolink Client.

Click Device Settings -> Network Settings -> Advanced. Find Port Settings and click Set Up. Enable RTSP and ONVIF, and then click Save.

Step 2. Add Reolink cameras to Blue Iris.

This step is done on Blue Iris software, so you should launch Blue Iris on your PC or Mac first.

1). Click the “+” button at the top right, or right-click and select Add new camera.

2). Input the camera name and choose Network IP as the connection type. Check Enable audio and Enable motion detector in the Options menu. Click OK to continue.

3). Input the IP address, the correct User Name, and Password. Click the Find/inspect… button to search the camera in LAN.

In the current window, you are gonna need to do several setup steps:

• Set Make to Reolink and choose the corresponding model.
• Change the Discovery/.. ort into 8000. (If you ever change RTSP or ONVIF port number, you should input the current value.)
• Click OK to finish adding the camera to Blue Iris.

If the connection fails (there is a striped video signal), you can change the Make option to Generic/ONVIF and the Model will automatically change to RTSP H.264. Still, make sure the ONVIF port is 8000 (default number) or the current value if you ever changed it.

Here is a video to show you how to add Reolink cameras (exclude some cameras) to Blue Iris from the beginning to the end.

4). Configure PTZ security camera on Blue Iris.

If you use Reolink PTZ security cameras, such as RLC-823A or E1 Outdoor, you can enable the PTZ function on Blue Iris by clicking the PTZ/Control tab and checking Enable Pan/Tilt/Zoom and other controls (focus. Brightness, etc.).

Don’t forget to set Network IP. Click OK to save settings.

Bonus tip: You can follow this step-by-step guide to call PTZ IP camera preset on Blue Iris.

If you have any questions about adding Blue Iris cameras, you can leave them in the comment below.

Blue Iris Cameras Troubleshooting

Some of you, especially the beginners, may encounter various problems while using Blue Iris software. So we list the issues you care about most and offer the solutions that can help you use Blue Iris cameras better.

Blue Iris cameras recording issues

Here are some of the most typical recording issues that may happen to you when using Blue Iris.

– Issue 1. Blue Iris won’t record videos, both motion-triggered and continuous videos.
You can try the following methods.

• Upgrade your Blue Iris to the latest version.
• Make sure you’ve enabled the motion detection or 24/7 recordings on Blue Iris.
• Turn on direct-to-disc recording.

– Issue 2. Blue Iris not creating new recordings for hours? What settings do I need to fix?

If you expect each motion-triggered video recording to be stored separately, please follow the below simple steps:

On the camera properties, please click Record tab, and then uncheck Combine or cut video each.

– Issue 3. How to record 24/7 with Blue Iris?

You can make your security camera record 24/7 on Blue Iris with the following steps.

• Right-click the camera.
• On the camera properties, click Record tab.
• Select Continuous under Video.

How to set up motion detection and video recording on Blue Iris?

After you’ve added your camera to Blue Iris, you can follow the instructions below to set up motion detection.

Step 1. Click the camera icon  at the top/left of the Blue Iris window, and then click the Motion/Trigger tab.

Step 2. Check the required boxes, including Enable under Motion sensor, Object detection, Use zones and hot spot, High definition, Cancel shadows and Trigger using cameras’ digital input or motion, and then click OK.

Step 3. Click the Record tab, and then check the required boxes including Video, JPEG snapshot each & Create Alert list images when triggered, and then click OK.

Now you can get motion detection recordings with the Blue Iris.

Blue Iris requirements and setup questions

According to Blue Iris’ team, the minimum requirements for your computer are:

• A dual-core or equivalent 2 GHz processor or better
• More than 2 GB RAM
• At least Microsoft XP SP3 or newer version, such as Window 7 & 10, or a server OS
• 1 or more cameras with DirectShow drivers

If you use multiple Blue Iris security cameras, such as 12, 16, 30, or even a maximum of 64 cameras, you need a much more robust computer. Recommendations include:

• Intel core i7 with QuickSync for hardware decoding
• More than 8 GB RAM
• Microsoft Windows 8.1 or 10, 64 bit
• NVIDIA graphics adapter for efficient screen display
• 7200+ RPM drives and/or SSD drive

In order to minimize your computer CPU consumption, you may set up the video frame rate to 15-20 fps.

NVR system V.S. Blue Iris + PC, which is better?

If you only need 2 or 3 IP cameras to run 24/7, and/or happen to have an extra computer, you can opt for Blue Iris + PC option.

Your computer storage space can handle several IP cameras recording continuously.

But if you want 4 or more cameras, a dedicated NVR would be the way to go.

Typically, the cameras and NVRs from the same brands can work seamlessly. All the videos will be stored on the hard disk of the NVR for your later playback.

If the storage space of the NVR is running out, it would automatically overwrite the oldest video footage, so you don’t need to delete the videos manually.

You can check more details on NVR vs PC for security camera video storage.

Frequently Asked Questions about Blue Iris

Here are some questions often asked by Blue Iris users. Now you can find the answers quickly.

How many cameras can Blue Iris support?

As mentioned above, Blue Iris can support multiple (up to 64) cameras with the full version license.

But don’t forget that Blue Iris LE version license only supports 1 camera. So if you want to manage multiple cameras, you’d better have a full version of Blue Iris.

How to solve Blue Iris CPU usage problem?

When you use Blue Iris to control your surveillance cameras, BI’s motion detection and transcoding would consume much CPU power of your computer.

You can try the below 5 useful tips to minimize the CPU consumption caused by Blue Iris.

1. Turn on Direct-to-disc recording. It records the cam streaming without re-encoding. However, it has downsides. Blue Iris won’t be able to add its own overlays (time and camera name).

2. Turn the video frame rate down to 15-20 fps.

3. Reduce pre-event capture to 40 frames.

4. Turn down the sensitivity level of the motion-triggered setting.

5. Shorten the pre-recorded time in motion detection setting.

What if Blue Iris camera has no signal?

If you encounter security camera signal loss when using Blue Iris, you may try the below solutions to troubleshoot the issue.

• Update Blue Iris to the latest version.
• Lower the camera’s frame rate.
• Reboot your security cameras & Blue Iris software.

How to rearrange cameras on Blue Iris?

If you cannot change your security camera layout on Blue Iris, you may follow the below 2 simple steps to fix it.

1. Right click the blank space in the Blue Iris window.

2. Uncheck drag lock.

Now you can change the security camera group layout on Blue Iris.

Which cameras does Blue Iris support?

Most cameras in the market are compatible with Blue Iris, including Webcams, Network IP cameras, and others. The most popular security camera brands include Reolink, Amcrest, Hikvision, Dahua, etc.

But remember not all of the functions of the compatible cameras can be used on Blue Iris. So you’d better confirm the compatibility issues with the manufacturer.

Does Blue Iris connect to a WiFi camera?

Yes, Blue Iris works with most network IP cameras, including WiFi cameras, PoE cameras, or USB IP cameras. You need to set up the WiFi camera first with the software of the manufacturer. After you’ve initially set it up, you can add the WiFi camera to Blue Iris quite easily.

For more details on adding cameras to Blue Iris, click here >>

Conclusion

Blue Iris is one of the best professional software for security camera recording and monitoring. The best part of it is that it allows you to manage and control different models of various brands. Apart from that, the rich features of Blue Iris are another reason why so many homeowners love it.

If you have any problems with Blue Iris software or Blue Iris compatible cameras, feel free to discuss them in the comment below!

As one of the most popular and best 4K PoE cameras, RLC-811A can work seamlessly with Blue Iris software.

<p>The post Blue Iris Cameras 2022 Complete Guide first appeared on NVR IPCAMERA SECURITY.</p>

Remote Access – Basic Troubleshooting

If you’re having trouble with setting up your Swann unit for remote viewing, or the remote viewing was working but has since stopped, here are some simple steps for you to try.

1) Reboot the recorder or camera

Rebooting the device both clears the memory and sets up the basic network parameters of the recorder or camera again. This can help if the router has “lost” the device from the routing table or if the device requires a new local IP address.

2) Reboot the modem and/or network connection devices

There may be an issue with your modem or network connection that is preventing the Swann unit from contacting the internet correctly. Rebooting these devices can correct these issues.

3) Reconnect the network cable and/or try a different one

For some Swann units such as recorders, the network (Ethernet) cable connects your device to your internet connection devices such as a modem or a router. Sometimes the contacts may become loose requiring you to replug the cable for the recorder to start working again. We suggest testing the cable on a different LAN port, located behind your modem/router. If this also fails, then your cable may be defective and may need to be replaced. If you have a spare network cable lying around, try switching the cable to see if it helps.

4) Reset the recorder or camera

For recorders – While this step is rather drastic, it can also be of use where the recorder’s settings have been misconfigured or if you have changed or reconfigured your network or internet hardware. This will clear all the settings from your recorder, including your network settings which could be causing the issue with your local/remote access from phone or computer.

If this step seems like a lot of work to recover from, do not forget to export the settings of your recorder to a USB stick before you proceed. That way, if the reset does not correct the issue, you can easily recover the settings lost. Also, if the reset did solve the issue, you can reapply the settings to see if that was what caused the issue. Check your recorder’s user manual for configuration export instructions.

For Wi-Fi cameras – if your camera has settings related to network, it might also be misconfigured or something has changed internally. Be aware that there is no exporting of settings here therefore, if you will reset your camera, you might re-do the first time setup.

Load More :

1. Problems with Swann Security Cameras
2. Swann Latest Firmware Files Guide
3. Swann Security Password Reset All Model

Swann Security – Error: Device has been disposed

NOTE: This guide is for the following recorders : DVR-4480G, 4480RN, 4480V, 4580G, 4580RN, 4580V, 4680, 4680RN, 4680A, 4680X, 4680XN, 4685, 4685RN, 4780V, 4980, 5580, 5580A, 5580G, 5580G2, 5580RN, 5580RU, 5680, 5680A, 5680RN, 5680X, 5680XN, NVR-8580, 8580RN, 8780, 8780RN, NVW-650, 800

This error message means that the username and/or password you entered on the app doesn’t match your recorder’s credentials.

To resolve this, you need to go to the recorder itself and try to log in – this is to ensure that you have the right username and password of your unit. Once you have it, you may try to add the device again and carefully enter its credentials on the app. In summary, you need to: Select Pair Device. Scan its QR Code (either the sticker on top of your unit OR in Menu) Enter the recorder’s credentials (case sensitive).

You may find this video useful but most importantly, you need to have your recorder’s username and password with you as this is needed when pairing your recorder.

Setup Cloud storage to OS 5 recorders

NOTE: This guide is for the following recorders : DVR-4480G, 4480RN, 4480V, 4580G, 4580RN, 4580V, 4680, 4680RN, 4680A, 4680X, 4680XN, 4685, 4685RN, 4780V, 4980, 5580, 5580A, 5580G, 5580G2, 5580RN, 5580RU, 5680, 5680A, 5680RN, 5680X, 5680XN, NVR-8580, 8580RN, 8780, 8780RN, NVW-650, 800

Swann’s OS 5 recorders now has the feature to save images or recordings through Cloud which might be more accessible to you without being on the unit itself. This can serve as another way to get notified when there’s a movement detected on one of your cameras.

Couple of things to prepare:

1. Make sure to have a Dropbox account ready. If you don’t have one, visit Dropbox and register first.
2. Then make sure your recorder is connected to the internet. Not having this will obviously not send the recordings on the Cloud or even give you access online.

Setup

1. On Swann Security app, go to Menu > Dropbox.
2. Choose your recorder that you want to setup.
   
3. It will open Dropbox app or Dropbox website will open (depends on what you have) – make sure you are logged in to the Dropbox account where pictures or videos will be saved.
   
4. Allow – choose this to allow Swann Security to gain access on Dropbox.
5. COMPLETE! – it will go back to the Swann Security app once you chose Allow. Tap again the recorder and this message (image at the right) should appear.

In case it repeats step 3, just cancel it or go back, then you’ll see this message (image at the right).

 

Enable Cloud Notification

1. Go to Menu > Alarm > Detection
2. Click on Action
3. Enable Picture to Cloud or Video to Cloud on selected Channels.

…and you’re DONE! Now every time the recorder detects movement, it will then send it to your Dropbox.

Be aware of the following:

• Default Dropbox storage has limited storage space
• Not all channels can be selected to upload video
• Uploads to Dropbox consume upload data, be aware of potential additional charges when using an internet connection with caps/data usage charges
• Consider using the Overwrite option to select a timeframe that the Cloud storage uses, to keep the storage from filling up. Note that if the storage fills up before the Overwrite deadline, that it will operate the same as Auto
• Be aware that a desktop PC with the Dropbox software installed may download any recordings to the Dropbox folder on that PC

Password Reset for SwannBuzz Account

This article will guide you on how can you reset the password of your SwannBuzz account.

	Open SwannBuzz then tap Forgot Password? below the Password field.
	Enter your registered email address then tap Get New Password.
	Now check your email (even your Spam or Junk folder) to get the temporary password.   In the app, tap Return to Sign in
	Get the new password.   Go back to SwannBuzz app then log in using your email and new password.
	Once logged in, it will ask you to set a new password. Enter it on both text fields.   Tap OK and that will now be your new password.

NOTE: If you didn’t receive an email and you are using a private email similar to .gov or .edu emails, please contact your IT or the domain.

OutbackCam: Why detection angle different to viewing angle

The OutbackCam utilizes a passive infrared motion sensor so that the system is able to run in a stand-by mode. This means the battery life of the system is extended from what would otherwise be hours, into weeks and/or months. When activity is detected by the motion sensor, the camera component that was previously switched off is now activated and takes one or more snapshots. Due to the time difference between when motion is detected and when the camera is able to take its first photo, we have extended the detection angle so that an object moving through the shot will be captured despite the activation delay.

Having said that, passive infrared motion detection is not a flawless technology. You will get times where the sensor detects motion when there is none. When passive infrared motion detectors are used outdoors, there is a higher likelihood of false alarms due to a large number of varying environmental variables such as temperature, wind speed, time of day and lighting conditions.

If you believe this renders the system unusable, you could try using race tape (a.k.a. gaffer tape) to tape either side of the white passive infrared sensor until you have an acceptable detection angle.

How to get the MAC address of a recorder using an Android device?

If you forgot your password but needs to login to your recorder, you most probably need the MAC address of the recorder to enter. We have couple of articles to help you with that HERE but all of those require a computer.

This article will help you get the MAC address of your unit by the use of an Android device and a 3rd party app called Fing.

Scan this QR code and install the app:

or go to Playstore and search for Fing.

Once the app is installed, here are some requirements:

1. You must be at the location where the unit is.
2. The Android device must be connected to the same router where the recorder is connected.
3. You must have a monitor and mouse connected to the recorder to input the MAC address later.

Once you got your MAC Address, visit the article that is meant for your device HERE to know how to reset your password.

How to enable push notification of Swann apps in iOS?

Upon installation or while using the app, it will ask for some permissions to be allowed.

Check the instruction below if you chose Don’t Allow on the initial setup:

Phone Settings

1. Go to Settings on your phone and select Swann Security.
2. Enable Notification and Location – as for Location, choosing either Always or While using the app works fine.

App Settings

This applies to Swann Security only; go to the Menu then select Notification. Make sure it is enabled.

Recorder Settings

For recorders compatible to Swann Security, check this article: How to enable push notification on recorders with V8 firmware?

How to change the position of the Date and Time display bar on my DVR

You can adjust the position of the OSD from the menu display of the DVR. It has to be done directly from the DVR, using the monitor that is connected either to its VGA or HDMI output.

You simply open the menu of the DVR, go in the menu display, and then, from the camera tab, click on SET next to the OSD Display Position.

Afterward, with the mouse connected to the DVR, left click on the date and time display , hold down the button and drag the display wherever you wish .

The position chosen for the Date and Time Display will be reflected on the live view on your computer screen, should you access the DVR through the Network Interface ( and also on the recorded videos if you have enabled record date from the Display menu of the DVR ).

How do I improve my remote viewing performance?

If you’re experiencing any intermittent connectivity issues when streaming or playing back videos from your recorder, on either the computer software or phone app, then the problem may be related to a limitation with your internet connection speed.

It is important to consider the amount of bandwidth needed when viewing your cameras remotely.
Increasing the video quality of the stream also increases the amount of data needed to upload the video onto your phone or computer.

You can use this article to help you check your speed before continuing to adjust your settings.

The diagram below summarizes the data transfer process of when a video is being uploaded to the server and then downloaded onto the user’s phone.

1. The recorded video is encrypted and uploaded onto the server (internet)
2. The file is then downloaded onto the computer or phone.

This is why the download and upload rate is important when streaming videos from a remote location. The higher the quality of the recordings, the more data is needed to be upload onto the server.

There are a couple of things you can change on the recorder to help improve the streaming service.

1. Reduce the streaming quality, on the phone.
2. Reduce the sub-stream resolution and bitrate, on the recorder.

See instructions below.

Stream on Fluent

This step is necessary for us to use lower bandwidth when streaming the cameras.

You may want to keep in mind that the quality will be lower than expected to lessen intermittent connections and get a smoother experience when viewing the cameras.

These are the things you can do using the software or app.

• If you are accessing the recorder using SwannView Link software, click the Play button at the right and choose All channels fluent.
  
• If you are using SwannView Link app, tap Stream and choose Fluent.
  
• If you are accessing the recorder using SwannView Plus software, right-click on the recorder at the left side and choose Set Sub-Stream To All.
  
• If you are accessing the recorder using HomeSafe View software, right click on your recorder at the left, and choose Set Sub Stream to All.
  
• If you are accessing the recorder using HomeSafe View app, tap on the Stream icon and choose Substream.
  

<p>The post Swann Security Troubleshooting All Devices first appeared on NVR IPCAMERA SECURITY.</p>

After a few easy steps, the Blink camera system will show your clips in the Blink app.

Install the Blink application

 

 

The most recent version of the Blink app is always available in your app store.

Blink supports most smartphones, tablets, and many Alexa enabled products.

Follow the link or scan the QR code to access the most recent Blink app download.

Blink version 6.16.0*
for iOS 12.5 and later.

Blink version 6.16.0
for Android v6.0 and later.

Blink version 6.16.0
for Fire OS v7.0 and later.

*If you can’t locate the Blink app iOS 6.15.0, please refer to this article: End of Support for Android Version 5 – iOS Versions 12 and 13

To Get Started with the Blink app, follow the instructions below:

1. Launch the Blink App and tap Create Account at the bottom of the screen.

2. Select your country from the drop-down menu and tap Next.

3. Confirm your region and tap OK.
A region is pre-selected based on your IP address.

4. Enter a valid email address, and tap Next.

5. Create a password and tap Create Account.
The password requirements are listed at the bottom of the screen.

6. Complete the multi factor account verification process.

 

Enter the PIN from the email we sent you and tap “Verify”.

New Account PIN	New Account with Expired PIN

PIN codes are valid for 40 minutes. After one minute, the “Resend PIN Code” option appears.

When you have verified your email address, the app configures your SMS text phone number to send alerts and for account verification.

When you are presented with a Phone number entry screen, tap the Phone number entry line to bring up a keypad.

Select your country code from the menu that is displayed when you tap the flag icon next to the Phone number entry line.

Enter the phone number you wish to use for device verification and tap “Next“.

 

If you prefer to not use SMS, the PIN code can be read to you by an automated Voice call instead.
To choose this option, select “Voice call” and tap “Next“.

Note: The SMS text option should only be used with mobile phone lines and will not work with landlines. Blink ONLY uses this number to positively associate your device to the Blink app – to make sure the person making changes is you. Your information is private and will not be used for additional purposes or shared with third parties.

Click to learn why we need your phone number. Contact Customer Service if you don’t have a phone number.

At this point, an SMS Text message containing the PIN code is sent to the phone number, and the PIN entry screen is opened for you.

Example SMS Text Message:

Your Blink verification code
is: <123456>

Enter the PIN from the SMS Text message we sent you and tap “Verify”.

PIN codes are valid for 40 minutes. After one minute, the “Resend PIN Code” option is presented.

Verify SMS PIN	Verify with PIN

When the verification step is complete, you are prompted to link your new Blink account to your Amazon account, by tapping on the “Link Accounts button”. This is an optional step. Click to learn how to link your accounts at a later time.

You also have the option to select “Skip” which will take you to the home screen, without linking your accounts.

Then sign into your existing Amazon account or create a new one if needed. The link is then established between accounts and click Next.

Install a Sync Module

 

Add a Sync Module and create a system

1. From the home screen, tap the Add Device + icon.

2. The Add Device screen displays your device options.

3. The serial number is also printed as a QR code. To scan a QR code, the Blink app requires permission to access the camera on your mobile device.

Tap OK to permit the Blink app to scan the QR code, automatically entering the serial number. If you prefer, you can deny access to the camera by tapping Don’t Allow and enter the serial number manually.

To learn where the QR code and serial number are, tap the “Help me find my QR code and serial number” link at the bottom of the Scan QR Code screen.

4. When the QR code is recognized, you are asked to create a new system by tapping the text entry box and providing a name. Tap “Done” to continue.

5. The Add Sync Module screen will instruct you to plug in your Sync Module and then wait for the light pattern of blinking blue and steady green.

When you see the pattern on your Sync Module, tap Discover Device.

Note: If you don’t see the blinking blue light pattern, then you may need to reset the sync module. Click for instructions to reset the Sync Module.

6. The Blink app needs to connect to the Sync Module’s Wi-Fi network. It is named “BLINK-” followed by four digits from the Sync Module Serial Number.

Tap Join, then you are asked to join your local Wi-Fi network.

7. The Add Sync Module screen displays 2.4 GHz Wi-Fi networks within range.  The Sync Module stores network information for devices that are added to its system. If you do not see your local Wi-Fi network, tap Refresh List at the bottom of the screen. You can troubleshoot Wi-Fi connections here.

8. When you tap your Wi-Fi network name, you are presented with a password entry field. Ensure that your password is correct before you enter it. Incorrect password is a common cause of difficulty getting started. Tap Join to continue.

9. When network setup is complete, you are notified on the screen. Tap Done to complete the install process and view the Blink app Welcome screen where you can now add a camera.

The system name should appear at the top of the Home screen. You are notified that the Sync Module has been added, the ‘cloud’ icon shows a green connection line indicating that the Sync Module is communicating with the Blink servers, and you can now tap the plus symbol  +  to add a device.

Add one or more cameras

 

INSTRUCTIONS

1. From the home screen, tap the Add Device icon +.

2. The Add Device screen shows devices you can add to your system.

Note: The Mini camera and Blink Video Doorbell do not require a Sync Module, but they will act like other Blink cameras when added to a Sync Module. In addition, one or more Mini cameras can act as a chime for one or more Blink Video Doorbells, when they are on the same system.

To use Local Storage, you must add your device to a Sync Module 2 with a recognized USB drive.
Click to learn more about Local Storage.

Your selection opens the QR code scanning screen.

3. Enter the serial number.

Your device serial number (DSN) is represented on a sticker in the form of a QR code that is recognized by the camera on your mobile device. If this is your first device added, you are asked for permission to allow the Blink app to use your device camera. Blink will never access your device camera except when you are scanning a product QR code, so you can safely allow access.

The serial number for Mini is printed on the back of the unit, and for other cameras, it is inside the battery compartment. Click for instructions to remove the back cover of a Blink camera.

If you prefer to not use your device camera, tap “Enter Serial Manually” and enter the DSN with your keyboard.

4. Camera adding completed.

When the serial number is accepted as valid, the setup process begins and you are shown the “Camera Added” screen with tips on camera placement.

When setup is complete, a notification appears and you can tap Done.

Click here if you receive an error “Unable to Connect to Sync Module” when adding cameras to a system.

For accounts that were created on or before April 15, 2020 you continue to use 2 hours of free basic cloud storage for all devices. Each clip is deleted when it is 60 days old.

If your Blink and Amazon accounts are not already linked, you are asked to link them by tapping on the “Link Accounts” button. You should link accounts to take full advantage of subscription features.

Note: You also have the option to select “Skip” which sends you to the home screen without linking your accounts. Click to learn how to link your Blink and Amazon accounts later.

The Link Accounts screen asks you to sign into your Amazon account, or create a new one if needed. When the “Success! Accounts linked.” message appears, click “Next” to go to the Home screen.

5. The Home screen now shows a blank thumbnail and the camera name is its serial number.

Add an accessory

 

Blink accessories automatically add to existing accounts when an Outdoor camera is plugged into them. When you tap the Plus symbol + on the app home screen, you can select the “Camera Accessories” option at the bottom of the Add Device screen.

You will then see the “Accessory Set Up” screen which provides instructions on how to connect your Outdoor camera to your accessory. Tap the Done button once you have plugged the USB cable into the port on your camera.

• Click here for additional Blink Floodlight setup instructions.
• Click here for additional Blink Solar Panel setup instructions.

Next Steps

 

When a camera is first installed, its serial number (DSN) is entered as the camera name, and the thumbnail image is blank.

 

Tap the camera name to change it, enter the new name, then tap OK to save.

 

Tap the thumbnail icon to take a new thumbnail image. The thumbnail remains until you refresh it with this button.

The Blink Video Doorbell refreshes the thumbnail image each time the ringer button is pressed.

 

Click to learn more about using the Blink app.

Camera Placement

 

Blink cameras have an effective motion detection system, but it is possible that the camera will be triggered by more than just a human presence.

The InfraRed (IR) detectors in a Blink camera notice when heat is present in the camera view and the camera’s sensitivity setting relates to the size of the heat source that will trigger an alert. The camera does not see depth, so a nearby small object will appear similar to a large object in the distance, but their heat sources will normally be quite different.

The goal of tuning your camera sensitivity is helped by good camera placement. The camera’s Infrared motion detector is sensitive to heat differences in the view as an object moves, so any heat source could potentially trigger a motion alert. If your camera has a road in view, and passing cars reflect sunlight at certain times of the day, your camera will observe the flashes as heat and motion. If your camera is viewing trees that move in the wind, and the sun is behind them, that motion could be a trigger.

We have created camera sensitivity zones that you can select and disable to avoid false triggers. The camera sensitivity setting helps, but you will have the best experience if you place the camera looking at an area where you do not expect a lot of random motion. For instance, having the camera point toward an entrance is more effective than pointing the camera down the walkway from an entrance. The difference is, when pointing to the entrance, only motion at the door will trigger the motion alert. When pointing down the walkway, many possible triggers could send an alert that you are not interested in.

For motion alerts to be most reliable, place your camera so that the heat source must move across the view rather than toward the camera. Movement toward the camera produces far less difference over time than movement across the view.

Every motion alert will use some battery power, so it is a benefit to receive only the alerts you want.

To integrate Blink cameras with an Alexa device for really useful experiences, visit our Alexa Motion Announcement and Routine Trigger pages.

Mounting the camera

 

Blink lightweight wireless cameras are easy to mount securely.

Your Blink Outdoor, and Indoor (gen 2), camera comes with a right-angle adapter/opening tool and “volcano” cone-shaped camera mount matching the color of your camera body.

Mounting screws are included in the box.

Extra mounts and other accessories are easily found at amazon.com.

You can verify the camera view and check placement simply by holding your camera in the desired location, and using the Blink app to refresh the camera thumbnail, or enter Live View. Ensure that your preferred location has three bars of connectivity with both the Sync Module and your Wi-Fi network. Verify connectivity from the camera settings   screen of the Blink app.

Keep in mind that the best motion detection occurs when movement goes across the field of view. Motion directly toward or away from the camera can be harder to detect. Camera placement helps your camera settings be most effective. Learn more about tuning your camera here, and about camera placement here.

When you have determined the best location for your camera, secure the mount to a surface. If it is appropriate, use the included screws. The mount and screws are non-corrosive, but some moisture buildup may occur underneath the mount base.

How do I mount horizontally?

In horizontal locations such as a ceiling, or shelf, use the Right-angle adapter (pictured). This adapter snaps into the opening on the back of the camera, as shown with dashed lines below. Remove the silicone disc if it is present, to access the mount opening.

Now, press-fit the adapter onto the connecting point of the mount. You should detect a ‘snap’ indicating a secure attachment. Your placement may require that you attach the adapter to the camera before attaching both to the mount.

 

Vertical Mounting

In vertical mounting locations such as a wall or post, the camera can connect directly to the volcano mount. The camera opening snaps directly onto the mount as shown in the image.

When your camera is mounted, go to the Blink app and create a thumbnail or enter Live View, to know if the camera view is right, or needs to be adjusted.

 

Click to learn about motion detection.

Click to learn about Activity Zones.

The packaging insert contains important information about the product and warranty.

Click the image to download a .pdf of the EU and UK version of the Blink Indoor & Blink Outdoor packaging insert.

<p>The post How to set up battery powered Cameras first appeared on NVR IPCAMERA SECURITY.</p>

Blue Iris is extremely powerful and customizable. It will let you capture motion recordings, snapshots, and you can even send Deepstack Blue Iris images to Telegram to keep a history of all objected-detected events in place.

This is a very thorough guide, but I’m going to break it down in a step-by-step for beginners. Even if you’ve never use Blue Iris, Deepstack, or any other local NVR security camera software, you can get this up and running quickly and easily.

Let’s get started!

Prerequisites:

Before you get started, you will need the following items:

• A Windows 10 or Server 2019 computer, preferably an Intel Core i7 with QuickSync (I’m using an AMD Ryzen 7 PRO 2700)
• A couple security cameras setup on your network (I’m using an indoor Amcrest IPM2 and an outdoor Amcrest IP5M turret)
• A copy of the Blue Iris software (lifetime $69.00 cost)

Once you have those 3 items setup and ready to go, you can begin the Blue Iris installation process below.

Step 1: Download and Install Blue Iris

The first step is to purchase a copy of Blue Iris. Once purchased, you can download the full version.

Double-click the blueiris.exe to start the installation.

It will prompt to install any missing prerequisites. Click Next.

Agree to the ToS to install the Microsoft Visual C++ Redistributable.

Once complete, it’ll bring you back to the Welcome screen. Click Next again and accept the Blue Iris terms and conditions.

Install Blue Iris in the default folder. Then click Install.

Installation only takes a few seconds. Check the Launch Blue Iris 5 box and then click Finish.

A product activation box will popup. If you are using the 15-day free trial, you can just click Demo. Otherwise, enter a product activation code you received after purchasing by clicking Next.

Note: If you don’t want to setup Deepstack for object detection (which is free and open source), you can skip Step 2 and go directly to Step 3. If you do want to install Deepstack, follow Step 2.

Step 2: Install Deepstack

Navigate to this URL: https://docs.deepstack.cc/windows/

Click the Download CPU Link for Windows. There is also a Download link for Nvidea GPU’s, if you’d like to offload the AI detection on your graphics card instead.

Once downloaded, double-click the .exe to run it.

Install Deepstack with all defaults. Click Finish once complete. To launch Deepstack, open Powershell from the Window Start menu.

deepstack --VISION-DETECTION True --PORT 80

Step 3: Launch Blue Iris

Search your computer or server for Blue Iris from the Windows Start button. You can launch either Blue Iris Admin or Blue Iris.

On the top left corner, click the gear to enter the Global settings screen.

For the rest of step 3, I’m going to refer to each section as “tabs”.

About Tab

In the About tab, give your system a name (i.e. – Blue Iris)

In the Software Support and Updates section, it should default to “no automatic updates” by default. If not, you’ll want to turn automatic updates off.

Clips and Archiving tab

For this section, we’ll need to create a few Windows folders where we want the Blue Iris clips and recording footage to be stored. Ideally you’ll want to choose a harddrive with a decent amount of storage.

I’m using my S:\ drive as the target, which is a 690gb SSD array.

Create a new parent folder on your target drive called “BlueIris” (i.e. S:\BlueIris).

Click into your BlueIris folder and create 4 new folders:

• db
• New
• Stored
• Alerts

Next, we need to map the 4 new folders to the “Folders” section in Blue Iris.

“New” Folder

Click the New folder in Blue Iris. Change the path to the path of your “New” Windows folder. Set a limit, uncheck limit clip age, and set to delete. This is basically going to continually record and store footage until your 300gb is reached and then delete the oldest clips. If you have a large NAS or external drive, you could also click the Move to Folder option and archive them there instead of deleting.

Note: The more cameras you have and the higher resolution they are, the more storage space you’ll need.

“Stored” Folder

Since I have my clips set to delete once it hits the 300gb limit, I’m not really going to be using the Stored folder, so I’m setting it to 20gb, unchecking Limit Clip Age, and setting it to Delete. Down the road I may use this folder for exported clips.

“Alerts” Folder

The “Alerts” folder is where all pictures will be stored (including the Deepstack analyzed snapshots).

I set the limit size to 1gb, checked the box to limit the age to 7 days, and set it to Delete.

“db” folder

You will also need to set the path for the Blue Iris database(db).

IMPORTANT: Your “New” and “db” folders should be on a fast, local storage drive (like an internal SSD), but the Stored folder can be on anything you want. The warning in the above screenshot reminds you of that as well.

Users tab

The Blue Iris users tab is is where you can create and limit access. For example, you can non-admin users, limit access to camera groups, set access times, restrict logins on your local network or configure login schedules.

I recommend leaving these as default for now. You can always come back and adjust these later. For now, just create a new user with a secure password, grant it Administrator access, and restrict access to LAN only (since I’m only ever going to access my cameras on my local network or across my WireGuard VPN). If you do plan on accessing your cameras from a remote network, you’ll need to open a firewall port and uncheck the LAN Only box.

After your new admin user has been created, disable the local_console user.

Web Server tab

To access Blue Iris, you can either open it from the desktop app or from a web browser. I primarily use the Blue Iris Admin desktop app to manage or adjust Blue Iris settings and the web server to view my cameras.

Blue Iris will autofill your server’s network information, including IP address and port. This will allow you to log into Blue Iris from an IP address like 192.168.68.137:81 from any browser on your network. Super handy for accessing from your phone. (I recommend going to this URL on your phone, then click your browser settings > Send to Home Screen. This will give you a shortcut on your phone for quick access)

You can leave everything as default here and just delete the remote access URL and uncheck “refresh external IP. Remote Access can configured later on and would be used for sending snapshots as phone push notifications, but I won’t be going over that in this guide.

Startup tab

The only thing you need to change in this tab is checking the box for “Run As A Windows Service”. This will allow Blue Iris to automatically start up after your computer starts and should reduce system resources.

After checking the box, a popup will prompt you for your username and password:

Cameras tab

Ideally, a 6th generation Intel processor or better is recommend. This allows you to use the QuickSync feature to decode footage more efficiently than raw processing. My AMD CPU is more than powerful enough for my two cameras but I still set this option anyways.

For most users, you’ll want to choose Intel + VPP.

AI tab

Check the Use Deepstack server on IP/port option. If you installed Deepstack, then make sure to check the box Auto start/stop with Blue Iris also.

If you didn’t start Deepstack earlier with the Powershell command, click Start Now (Mine shows Stop Now because it’s already running).

I leave everything else with their default settings.

Other Tabs

You’ll probably notice a bunch of other tabs in Blue Iris as well. Those are a little more advanced than I want to go over in this basic installation guide, but in future I will be setting up the Digital IO and IoT tab to configure with my MQTT broker in Home Assistant. That will be a separate guide and I’ll edit this post once I have that setup.

Adding Cameras to Blue Iris

Now comes the fun part: Adding your cameras to Blue Iris local NVR!

As I said earlier, I’m using two Amcrest cameras.

Launch the Blue Iris Admin desktop app if it’s not already open. Right-click the large black box to add a new camera. I’m using the name “drivewaycam” for both the full name and short name.

For the type, choose Network IP.

For the Options, choose Enable Motion Detector and Direct to disc recording. If you’d like your footage to capture audio, you can check the Enable Audio box if you’d like.

After clicking OK, you’ll be brought to a camera configuration screen. This setup will vary slightly depending on your camera manufacturer.

The easiest way to setup the initial configuration is by entering your cameras’ IP address, user, and password in the http:// field.

Then click Find/Inspect. This will autofill the stream profiles for you. (Note: For Reolink and Hikvision cameras, you have to log into the camera and enable the ONVIF option. See The Hook Up’s video for more info on it.)

Under the Advanced section, the only thing I changed is checking the box for Decoder Compatibility Mode.

If you are using an Amcrest like I am, then Amcrest has also put together a handy wiki page I referenced here. Once you click OK, you’ll be brought to the camera customization page, where you can configure things like triggers and alerts.

Video Tab

Here are my settings for the Video tab.

Set your framerate equal to the FPS in your camera (You can view the current FPS logging into your camera using it’s IP address in a web browser).

Then, uncheck Display overlays live and set your Hardware Decode to default.

Audio Tab

If you enabled Audio in the previous step, just make sure to check the box in this tab to enable it. If not, disable it.

Trigger tab

On the main page of the Trigger tab, set yours to match mine.

Click Configure next to Motion Sensor checkbox. Set your options just I like did. Since we are using Deepstack for object detection, you can uncheck object detection on this screen.

Under the When Triggered section, click Artificial Intelligence. For this part, I’m just telling Deepstack to look for “person” with a confidence level of 60%. Deepstack will be analyzing 3 images to determine whether or not it’s a person. There’s a ton of objects you could detect, such as car, truck, boat, bicycle, dog, etc. A full list of detectable objects can be found here. If detecting multiple objects, separate them with a comma and no spaces.

Make sure the Fire “On Alert” box is checked as well as the “Auto-flag confirmed alerts“. I also turned off Burn Label.

Record tab

We are going to configure this tab to use Continuous Recording + Alerts, splitting video into 1 hour files. I am also using a Pre-trigger buffer to record 5 seconds prior to motion being detected. This means Blue Iris will continually record footage until the “New” folder reaches it’s limit (configured to 300gb in the “New” tab section above)

Alerts tab

The only thing you need to change in this tab (for now) is setting the Fire when: to This camera is triggered. You can leave everything else as default.

Remaining tabs

The Webcast, Schedule, PTZ/Control, Watchdog, and Post tabs can be left alone for now.

Your camera is now setup!

Click OK. You should now see the Live Feed of your first camera in Blue Iris.

Testing Object Detection

Now, it’s time to test your Blue Iris + Deepstack NVR. To test, simply walk in front of your camera for a few seconds.

On the left tab, click the dropdown for “Alerts”. I have 5 alerts displayed so far which correspond to the 5 times I walked in front of my camera and Deepstack has detected that I am a “person”.

Basic Blue Iris Usage

Like I said earlier, Blue Iris is now recording 24/7. Once your limit has been reached, it will start to overwrite the old footage. If you’d like to see all recorded footage, change the dropdown to New. Then, double-click a segment to view it. They will be broken up into 1-hour segments as specified in camera settings > Record tab.

At the bottom, you’ll see a flag at the point in time when “person” object was detected:

However, since we are using Deepstack, we’ve configured these events to go into the Alerts folder so we don’t have to manually search through hours of video. So, you can also just switch to the Alerts dropdown, double-click a recording, and view just that clip.

I think it’s also important to explain how Deepstack works in the Alerts folder. If you sit and watch the “Alerts” dropdown, you’ll see it occasionally add an image and then delete it. This is because Deepstack has determined that the image processed isn’t a person. You will still see all images in your S:\BlueIris\Alerts folder. If you want to view just the images Deepstack has detected as a person, you’ll have to view those from within Blue Iris, not your Windows “Alerts” folder.

Remember: We set a 1gb limit on the Alerts folder, so once it hits 1gb, it’ll start deleting the older images.

Motion Rectangles

If you would would like to see motion rectangles around your motion detections and jpeg’s, here’s what you’d change:

Right click a camera > Camera Settings > Trigger tab. Check motion sensor and click Configure. Under Advanced, check Object detection and make sure to highlight “Show object rectangles”.

To see live motion squares on playback, double-click a recorded clip. Right click > Overlays > Add Motion Overlays.

Troubleshooting Deepstack/Blue Iris Detections

During initial setup, Deepstack might not detect the object correctly.

You might get false positives (i.e. – snapshots taken of things other than person, or nothing at all), or it may not trigger person detection. I recommend editing your AI confidence level by clicking the gear on your camera > Trigger tab > Artificial Intelligence:

Then, edit your confidence level here:

Adding Additional Cameras to Blue Iris

At this point, you may be dreading adding extra cameras. However, this is actually super easy. You can basically “copy” the existing settings from your first camera and apply it to any new ones! Really the only things you’ll need to change is the IP address of the extra cameras.

Right-click the black space next to your existing camera. Then click Add New Camera.

Give it a name and choose Copy from Another Camera:

Backup and Export Blue Iris Configuration

Now that you’ve got things setup and working, I highly recommend exporting your Blue Iris configuration. Just on the offchance your computer crashes or you need to reinstall Blue Iris at some point, it would be very useful to not have to setup this up from scratch again.

I recommend backing up to a different drive than where you installed Blue Iris or your recordings, such as a flash drive up uploading to Google Drive.

Click the gear at the very top of Blue Iris Admin. On the General tab, click Export.

Wrapping Up

Hopefully this tutorial helps you setup Blue Iris 5 and Deepstack quickly and easily! I wanted to give a shoutout to The Hook Up’s Youtube video which is where I got a lot of my inspiration and insight on how to set this up properly, so definitely check out his video as well.

I was hoping to setup a local NVR solution using Frigate in Home Assistant, but unfortunately every time I add cameras to my Home Assistant configuration.yaml, my zwave and zigbee networks stop responding correctly. I’m still not sure why. I even setup a 2nd HA instance, connected it to a different switch port, and didn’t use a zwave/zigbee dongle on the 2nd instance.

I’m not even upset that Frigate didn’t end up working for me, as Blue Iris is extremely customizable and works perfectly in my environment.

If you have any questions or comments, feel free to leave them below and I’d be happy to help you out if I can!

<p>The post Blue Iris IP Camera Software Setup Guide first appeared on NVR IPCAMERA SECURITY.</p>

Lines in timeline of schedule option which have yellow colour indicate the motion detection schedule.
After you create schedule for MD recording. Then
Go to Main Menum Settings Events Motion Detection.

Detection menu is shown below Figure

• Event type: From the dropdown list you can select motion detection type.
• Channel: Select a channel from the dropdown list to set motion detect function.
• Enable: Check the box here to enable motion detect function.
• Region: Click select button, the interface. Here you can set motion detection zone.
• Sensitivity: System supports 6 levels. The sixth level has the highest sensitivity.
• Period: Click set button. Here you can set motion detect period. System only enables motion detect operation in the specified periods.
• Anti-dither: System only memorizes one event during the anti-dither period. The value ranges from 5s to 600s.
• Alarm output: when an alarm occurs, system enables peripheral alarm devices.
• Latch: when motion detection complete, system auto delays detecting for a specified time. The value ranges from 1-300(Unit: second)
• Show message: System can pop up a message to alarm you in the local host screen if you enabled this function.
• Alarm upload: System can upload the alarm signal to the network (including alarm centre) if you enabled current function.
• Send email: System can send out email to alert you when alarm occurs.
• Record channel: System auto activates motion detection channel(s) to record once an alarm occurs. Please make sure you have set MD record in Schedule interface (Main Menu- >Setting->Schedule)

PTZ activation: Here you can set PTZ movement when an alarm occurs. Such as go to preset, tour &pattern when there is an alarm. Click “select” button.
• Record Delay: System can delay the record for specified time after alarm ended. The value ranges from 10s to 300s.
• Tour: Here you can enable tour function when alarm occurs. System one-window tour
• Snapshot: You can enable this function to snapshot image when a motion detect alarm occurs.
• Buzzer: Highlight the icon to enable this function. The buzzer beeps when alarm occurs.
• Test: Click it to test current motion detect setup (do not need to save). Click Select button after
Region, you can set motion detect area. The default setup is whole region. The blue zones are the selected area. Please set sensitivity and click Test button, you can see system only display motion detects status of the blue area. The red flashing area is current motion detect.
Please highlight icon to select the corresponding function. After all the setups please click save button, system goes back to the previous menu.
Note:
In motion detection mode, you cannot use copy/paste to set channel setup since the video in each channel may not be the same

<p>The post How to record for Motion Detection CP PLUS first appeared on NVR IPCAMERA SECURITY.</p>

When you first install your camera, motion detection as well as the automation rule (record and notification) is automatically setup. To enable/edit motion detection, follow the steps below:

Step 1: Launch the mydlink app.

Step 2: Tap Devices at the bottom of the home screen or tap the menu in the upper left corner, tap Devices. You can also tap the camera in your shortcuts and tap the live video to access the camera settings (skip to step 5).

Step 3: Tap Camera.

Step 4: Select the camera from the dial and then tap the gear icon

Step 5: Tap Motion Setting.

Step 6: Tap where you want to detect motion (represented by a orange square). Then select the sensitivity (0-100, 100 being the most sensitive). Once finished, tap < (iOS) or tap the back button (Android) to save your settings.

Step 7: Your settings will be saved.

Note: To turn “off” motion detection, tap the Clear All button, and then change the sensitivity to 0. Tap back to save your settings.

<p>The post How do I set up motion detection using the mydlink app? first appeared on NVR IPCAMERA SECURITY.</p>

Ring Alarm Setup Guides and Manuals

<p>The post Ring Alarm Setup Guides and Manuals first appeared on NVR IPCAMERA SECURITY.</p>