Please plug DVR or NVR into the router with network cable if you wanna use a computer or phone to connect the recorder locally or remotely.

You can judge whether the recorder was connected to the internet by the status of a network like a picture below.

If the status is not connected, it means the recorder did not connect to the cloud successfully.

Here are the methods:

1. Please check the yellow and green light on the ethernet port of the recorder. One should be blinking which indicates the recorder has connected to the router successfully. If not, please change the ethernet port of the router or another reticle to have a try.

3. Go to the Main menu—-System—Network to confirm DHCP is ticked.

4. Please reset the recorder to the factory default setting.

5. If you can, please change the router to have a try.

Here is new CMS software:

for Mac:

http://www.sanncegroup.com/document/Computer%20software/General_VMS_Beta_Mac_En_V1.20.0.14_20191012.dmg

for windows computer:

https://download.annke.com/document/Computer_Software/General_Bate_CMS_V3.1.0.9.T.20190306.exe

Then you can follow the steps below to add NVR/DVR to your CMS.

1 Download CMS and install it on your computer according to the instruction in the download file.

2 Double click the icon  to open CMS, the default User Name is super, the password is blank (no password).

3 For the first time login, you will see the interface as below.

4 To add DVR/NVR, you can click the System menu on the bottom right corner. Then go to Device Manager, click ADD AREA to create a zone.

Name the zone yourself and click OK.

5 After adding an area, click the area name you created then click on to add your DVR/NVR.

Device Name: name it yourself

Login type: choose Cloud

Serial ID: Here is a method to find Serial ID

User Name/Password: default is admin and no password, same as your DVR

Click “ OK” after you have done the above parameters, you could double click to open this device.

6 After you add your DVR successfully, you can view and manage your DVR on CMS.

7 Here is the introduction to the CMS interface.

Note: If you have a problem adding DVR/NVR to CMS, please double-check the connection between

your DVR/NVR and the Internet and upgrade your CMS to the latest version.

<p>The post How to Connect DVR/NVR on Computer Software CMS? first appeared on NVR IPCAMERA SECURITY.</p>

-Confirm that the VCR version information interface nat status is connected successfully, if the state is to detect, in the network settings, Select automatically obtain ip, restart the recorder

-End of the phone need to download the xmeye mobile client, add a device to fill in the device name, serial number, mapped port: 34567, the

In the input device serial number in the start-up wizard to scan the SN I completed after confirmation

In the device List interface, click on the corresponding device to remote access

-A computer terminal can be divided into web pages and Client 2 kinds of access: the

a.Remote URL www.xmeye.net , divided by account

You need to register and press the device to log in, add the device serial number can be

b.The client computer may be in Xiongmai encyclopedia download

vms Software, in the device management interface, select the Add Manually, the log type select the Cloud ID, fill in the serial number of the device after the save and continue, the home page-monitor interface, select the add serial number for remote access

c. CMS software

In the system settings, the monitoring point to manage add

Then add a region, add after the selected area to add a device

Select the cloud, and then add the serial number

In the picture left mouse double-click to open picture

<p>The post XMEYE How to computer and mobile remote access first appeared on NVR IPCAMERA SECURITY.</p>