What to Do if DVR or NVR can’t Connect to Internet Successfully?

HomeGuideHow To

What to Do if DVR or NVR can’t Connect to Internet Successfully?

Please plug DVR or NVR into the router with network cable if you wanna use a computer or phone to connect the recorder locally or remotely. You can

How do I factory reset and re-sync my Arlo camera?
How to Set up Alexa for Blink devices
Troubleshooting for Blink Mini Camera

Please plug or NVR into the router with cable if you wanna use a computer or phone to the locally or remotely.

You can judge whether the recorder was connected to the internet by the status of a network like a picture below.

can_not_connect_internet_XM_2.jpg

can_not_connect_internet_XM_1.jpg

can_not_connect_internet_XM_3.jpg

If the status is not connected, it means the recorder did not to the cloud successfully.

Here are the methods:

1. Please check the yellow and green light on the port of the recorder. One should be blinking which indicates the recorder has connected to the router successfully. If not, please change the port of the router or another reticle to have a try.

can_not_connect_internet_XM_4.jpg

3. Go to the Main menu—-System—Network to confirm  is ticked.

can_not_connect_internet_XM_5.jpg

4. Please  the recorder to the factory setting.

can_not_connect_internet_XM_6.jpg

5. If you can, please change the router to have a try.

Please sent an to support@dvraid.com to ask new to . But you need to inform us the model of your system. It is made up of numbers and letters such as DL81A. You can find it at the bottom of the recorder. Please refer to this link to find it.

COMMENTS

WORDPRESS: 9
DMCA.com Protection Status