.

Production Introduction

The NVR series is a HD surveillance product that designed for security field. It uses an embedded operating system to ensure stable system performance. It adopts the standard H.265 video compression algorithm and a unique spatial-temporal filtering algorithm to achieve high-quality, low-bitrate synchronous audio and video and 24/7 video recording. With TCP/IP network technologies, it has powerful network data transmission and remote control capabilities.

The NVR can be used locally or online applied as a part of a safety surveillance network. With professional network video surveillance software, it fully demonstrates its strong networking and telecommunication capabilities.

This NVR can be applied to security measures in various fields and departments such as banking, telecommunications, electric power system, judiciary system, transportation, smart communities, factories, warehouses and water facilities.

.

Unboxing and Initial Setup

When you receive this product, please confirm that it matches the model you ordered and carefully inspect the device for any obvious damage. After opening the casing, check whether the data cable, power cable, and other connections inside the device are firmly connected to the main board.

Please protect the labels attached to the bottom or back panel, which is very important to our after-sales service work. When contacting our company for after-sales service, you will need to provide the model and serial number on the order label.

1.2What’s in the box

or

.

NVR  Power Supply  USB Mouse

.

.

.

.

Quick Start Guide

.

Ethernet Cable  HDMI Cable  Quick Start Guide

Note: Products and accessories vary by product models, please refer to the actual product.

➊  Antenna   

USB Backup

.

Network Port

.

HDMI Port

VGA Port Audio Port

USB Mouse Power Port

.

❷  Antenna

.

.

HDMI Port

LAN Port USB 2.0 Port Type-C

NOTE: The picture shown is for reference only. Actual appearance is subject to the model you purchased.

➊

USB Backup

4

Monitor

3

2

1

Route

.

.

.

.

.

.

.

.

.

.

❷

USB 2.0 Port

LAN Port

Battery Camera

3

1

2

4

ZOSI Wireless NVR Detail User Manual

Read More : How to set up Zosi POE NVR System

.

.

.

.

.

.

HDMI Port  Type-C

Ⓒ Connect the NVR to the Router with Ethernet Cable.

Ⓒ Connect the NVR to the Monitor with HDMI Cable or VGA Cable. (VGA Cable is not included)

Ⓒ Connect the USB Mouse to the USB2.0 Port.

Ⓐ Connect the NVR to the Power Supply.

Ⓒ The monitor will display live view of the camera.

NOTE: To ensure the device works properly, it is recommended to power on the NVR first for testing before a final installation.

Via Smartphone

Search “ZOSI” in App Store, or use a browser to scan the QR code below to download and install the App, and follow the on-screen instructions to complete the initial setup.

.

App video operation link

.

Via PC

Download: https://www.zositech.com/app/

.

Basic Operation

After connecting the power supply, the power indicator light will turn on, and the device

will start up. At this time, you will hear a “beep” from the buzzer. By default, the system is in multi-screen mode.

Mouse Use:

Left-click:

Double-click a single-channel to make it full screen, and double-click again to return to the multi-channel display.

.

Left-click

Right-click

After the device is powered on normally, you need to log in to the system before operating it. The system will provide corresponding functions according to the permissions of the logged-in user.

The default for the device is “admin” and the default password is blank. You can log in to the system directly the first time after powering on.

After entering the preview page, double-click the left mouse button to switch between single or multiple display. On each preview screen, the date, time, and channel name can be displayed, and each screen display the recording and alarm status of the monitoring channel.

.

.

Motion Detection Triggered

.

.

Recording

.

.

Human-Figure Detection Triggered

Face detection Triggered

.

.

Vehicle Detection Triggered

.

.

.

.

Quickly enter the playback page Quickly enter the backup page Quickly enter the device information page Quickly enter the device network page Quickly enter the current camera configuration page Quickly enter the recording schedule page.

In preview mode, click the right mouse button to bring up the quick menu, and click the right mouse button again to exit the quick menu.

Single: Select single channel for live viewing Multi: Select multi-channel for live viewing

Start Scan: Start Scan refers to the system automatically

displaying each live video in sequence according to

theorder of the devices in channel lists.

Colour: adjust the brightness, hue, saturation, and contrast of the channel.

E-Zoom: Zoomed in digitally up to 4X or 8X of single channel.

Audio: Set the audio settings for each channel to enable, disable, or mute audio, and adjust the volume. When

[Auto] is selected, the audio will be enabled automatically when switching to the full-screen display

Snap: Snap and save the live view images

PTZ: Control the rotation of the PTZ camera and set the automatic cruise/preset point cruise.

Stop Record: Stop /Start Recording

Time Playback: As described in 3.4.2 below Intelligent Detection: Set up Intelligent detection and Siren Light Alarm

IPC Channel Configuration: IPC channel configuration management,upgrade cameras, etc.

Main Menu: Ether the Setting Menu

.

Pause/Play Prev Frame  Next Frame

Mute  Backup  E-Zoom

Exit

.

.

.

Backup: Enter the backup page.

Rewind Fast Forward

Speed up Speed down

Fast Forward: Play video clips at speeds ranging from 1/16x to 16x. Rewind: Play video clips in reverse at speeds ranging from 1/16x to 16x. Speed down: Play the video from the previous 30 minutes.

Speed up: Play the video from the next 30 minutes.

The function takes effect when the pause button is pressed.

Prev Frame: Play video frame by frame. Next Frame: Rewind video frame by frame.

.

Main Menu

Set functional parameters of the device, including: Basic Configuration, Live Configuration, Recording Configuration, Recording Schedule, Alarm Configuration, Network Configuration, User Management, PTZ Configuration, Advanced Configuration.

Basic configuration contains 3 sub-menus: System, Date & Time, and DST

.

[System Type]: The name of the system displayed on the client [Model Number]: Used for controlling multiple NVRs with one remote control [Password Check]: Checking this option means that users must enter a username and password in the system settings and have the corresponding permissions to perform certain operations. [Show System Time]: Choose whether to display the time on the scene. [Max Online Users]: Set the number of network users who can access the device. [Video Output]: Users can select output resolutions 1024×768, 1280×1024, 1920×1080, 2560X1440，etc..

[Logout After (Minutes)]: The system automatically logs out after a set time of inactivity. [Startup Wizard]: Whether to display the wizard on startup.

.

Set the start and end times of daylight saving time through the week or date.

Live configuration contains 3 sub-menus: Live, Main Monitor, and Video Video Masking.

1.Live

.

.

.

.

.

.

.

[Camera Name] Click on the camera name, and a software keyboard will pop up. Users can modify the camera name as needed.

Click on the Shift key to switch input method. [Colour] Users can adjust the brightness, hue, saturation, and contrast of the channel.

Configure display window format for the patrol view

Users can mask certain areas in the scene, max 5 areas.

[Mask Setting] Enter the live view, hold down the left mouse button, drag the mouse to set the blocked area, click [Save] to save the setting.

Double-click the area that needs to be deleted, and the area will turn black. Right-click

to exit, and then click[Save] to delete the blocked area.

.

Recording configuration contains 4 sub-menus: Enable, Video Quality, Time Stamp , and Snap.

Enable/disable recording functions for a specific channel, or set all channels to default enable. All channels default to enabling circular recording.

.

Note：These functions are not optional [Resolution] The recording resolution for each channel [FPS] The number of frames per second transmitted by the camera image [Max Bitrate] Camera supports maximum transmission bitrate

[Camera Name] Select whether to display the camera name or not [Time Stamp] Select whether to display time on this channel or not [Position] Click this button and users can use the mouse to drag the camera name and timestamp to any position on the live screen.

Recording schedule contains 3 submenus: Schedule, Motion, PIR/intelligent.

.

[Apply Setting to]Apply the recording schedule of a certain channel to other channels or all channels.

[Add] Add a recording schedule for a certain day [Delete] Delete the selected schedule

.

[Enable] After selected, the Motion detection function of the corresponding channel is turned on, and it is enabled by default [Holding Time] Select the alarm delay time for the channel, which can be set to 5s, 10s, 20s, 30s, 60s, 120s, or Always on. [Push Time] Set the time interval for pushing alarm notification to the mobile App, which can be set to 1min, 2min, 3min, 5min, 8min, or 10min. [Trigger] After the camera detects an alarm, the enable function is triggered

[Buzzer] When selected, the buzzer will sound when an alarm triggered [Show Full Screen] When there is an alarm trigger, the alarm will pop up in fullscreen display

[To Alarm Out] Select to trigger the alarm output on a specified channel [Email] When an alarm is triggered, the system will send relevant information to the user’s designated email, such as the alarm event, snapshot, device name, device number, etc. [Snap] When an alarm is triggered, the system will automatically capture and save images of the selected channel [To Record] Select the channel to trigger recording

[Area] In this interface, users can drag the scroll bar to adjust the sensitivity value (1-8), the default value is 7, the smaller the value, the higher the sensitivity. Because the sensitivity is affected by factors such as color and time (day or night), users should adjust the value according to the actual situation.

.

Click or drag the mouse to select or erase the detection area.

[ALL] set the entire field of view as a s ensitive area

[Save]Click to save settings

[Clear] clear the current detection area  [Exit] exit the current setting

interface

The sensitivity index ranges from 1 to 8. The default sensitivity is 7. The lower the value, the more sensitive. The higher the value, the less sensitive.

Note: It is best not to have flags,trees or other objects that are easy to flutter in the wind in the grid for motion detection to avoid false alarms.

[Schedule]

The setting of the motion detection schedule is the same as that of the scheduled recording. Please refer to 4.2.4 [Recording Schedule]-[Schedule] for specific setup steps. This function controls the effective time of the motion detection feature. Note: The default schedule for motion detection is to Select All.

.

[Channel] Select the channel for setting. [Holding Time] Select the alarm delay time for the channel. Options: 5s, 10s, 20s, 30s, 60s, 120s, Always [Push Time] Set the time interval for alarm notifications to be sent to the App.

Options: 1min, 2min, 3min, 5min, 8min, 10min [Trigger] The setup method is the same as Motion detection. Please refer to 4.2.5 Alarm Configuration – Motion detection-[Trigger]. [Schedule] PIR detection schedule setting is the same as Motion Detection. For detailed instructions, please refer to 4.2.5 Alarm Configuration-Motion Detection-[Schedule].

This feature controls the effective time of PIR detection.

[Channel] Select the channel for setting. [Enable] Set to select the alarm type such as human detection, face detection, vehicle detection, etc.All selected by default [Holding Time] To select alarm delay time of the channel .Optional time: 5/10/20/30/ 60/120s always. [Push time] Select the channel APP alarm push time, optional 1/2/3/5/8/10 minutes. [Trigger] The setup process is the same as for Motion detection configuration. Please refer to 4.2.5 Alarm Configuration – Motion detection-[Trigger] [Area ] After entering the live screen, press and hold the left mouse button, drag the mouse to set the intelligent detection area, click [Save] to save the settings; double- click the set area again to delete the human figure detection area.

Note: The default is to set the whole region. [Schedule]The schedule settings for intelligent detection alarm are the same as motion detection. For detailed instructions, please refer to 4.2.5 motion detection-Schedule. This feature controls the effective time of intelligent detection

4.Siren-Light-Alarm This page includes camera detection settings, alarm type, night vision mode, volume adjustment, and more

.

[Enable] After selected, the vehicle detection function of the corresponding channel is turned on, and it is enabled by default After opening, the sound and light alarm function of each channel can be set. [Alarm level] can choose strong sound and light alarm, slight sound and light alarm, strong sound alarm, slight sound alarm, strong light alarm [Alarm type] can choose motion detection, intelligent alarm, motion detection and intelligent alarm [Night Vision Mode] Black and White Night Vision, Full Color Night Vision, Intelligent Night Vision;

[Volume] Adjust the current channel ‘s volume [Manual alarm] Set manual sound and light alarm [Waning Light] can turn on and off the LED warning light of the camera

When the video loss, the NVR triggers alarm actions.

.

[Buzzer] When an alarm occurs, the device emits two long beeps. [Show Full Screen] When an alarm is triggered, the system will show the current channel with the whole monitor [Email] When an alarm is triggered, the system sends the alarm event message to the user’s specified email address.

[Alarm Types] Including Disk Full, IP Conflict, Disconnect, Disk Shortage Alarm,

Disk lost

[Buzzer] When an alarm occurs, the device emits two long beeps.

[Email] When an alarm is triggered, the system sends relevant information such as the alarm event, snapshots, device name, and device ID to the user’s specified email address.

[Disk Shortage Alarm] When the remaining capacity of the hard disk reaches the set value, an alarm will be triggered.

.

Network Configuration contains 3 sub-menus: Network, Email, WIFI Network

.

[HTTP Port] 80 by default [Server Port] 5000 by default [Mobile Port] 5001 by default

[Obtain an IP Address Automatically] Enable automatic IP address acquisition [IP Address] Set the IP address of the device [Subnet Mask] Set the subnet mask of the device [Gateway] Set the default gateway of the device [Preferred DNS Server] This address is provided by your internet service provider (ISP). It must be filled in when using mobile monitoring.

[Alternate DNS Server] This address is provided by your internet service provider (ISP). [PPPOE] Enable this option to establish a network connection using PPPoE. The connected IP address can be checked in[Main Menu]- [Information]- [Network] [User Name] Enter ISP (provided by Internet Service Provider) [Password] The password set [Test] Test whether the input IP address or PPPoE information is valid

[SMTP Server] Mail server address, which can be an IP address or a domain name (if it is a domain name, ensure that DNS is correctly configured for proper resolution). For example: smtp.gmail.com [Port] Mail server port number, the default port is 465 [SSL Check] Enable SSL (Secure Socket Layer) protocol for secure login [Send Address] The email address of the mail server [Password] The password for the sender’s email address [Receive Address] When an alarm occurs, it will be sent to the set email address. Up to 3 recipient email addresses can be set [Test] Test the current email configuration to check if it is successful.

This page shows the AP information of NVR，To protect user privacy, we hide important information [wifi channel]You can choose the camera WiFi channel，optional WiFi channel 1、2、3、4、5、6、7、8、9、10、11、12、13、other [Area] optional Area:MKK、EU、FCC、OTHER

[Add] : Add a username and set the user’s permissions. Clicking on it will bring up the following interface:

.

User can configure PTZ settings

Click the [Setting] button, and the following window will pop up: The user can adjust the PTZ camera to a suitable position through the button on the tool bar, click [preset call], the preset point is set successfully, and a maximum of 4 can be set. [Start preset point cruise] If enabled, the camera rotates according to the user’s preset point position sequence. [Start automatic cruise] If enabled, the camera will rotate horizontally at a certain speed. [Humanoid Tracking] If enabled, the camera will automatically turn on human tracking.

Advanced Setup contains 2 sub-menus: Reset, System Maintenance

.

[Reset] Restore all settings to factory settings [System Maintenance] The video recorder defaults to restart automatically every week at 2:00 am on Monday. User can choose to restart Daily, Weekly, Never.

.

Select a channel and start playing [Search] Search the video files for the selected channel and time. Click the Play icon to start playback.

NOTE: Dates in the calendar marked with blue squares indicate recorded footage.

1.3.2Event Search

[Search] Search the video files for the selected channel and time. Choose the desired time, click Search and select the file, and double-click the mouse to start playback.

[Search] Search for images for the selected channel and time. [Save] Save the currently displayed image to a portable storage device. [Save All] Save all captured images to a portable storage device.

NOTE:

1.The system’s default storage capacity for images is 2000. If the number exceeds 2000, the system will automatically overwrite previously unlocked images.

2.Double-click an image to play back the video from the time when the image was captured.

1.4Backup

.

By configuring the settings, the video files in the device can be backed up to the external storage device.

NOTE: Before backing up files, make sure to install a storage device that can accommodate the backup files. [Search] Select the files to be backed up based on the time and channel.

[Backup]Select the file that you want to back up in the list and click Backup. The video recorder backs up the video file to the USB flash drive.

Information contains 6 sub-menus: System, Event List, Network, Online Users List and System Update

.

.

.

.

.

[Refresh] Re-detect recognizable hard drives. [Browse] View information of the selected hard drive, including capacity, remaining space, disk status, attributes, total number of pictures that can be stored, and number of pictures that have been saved. [Format]: Delete data in the selected hard drive, including locked files and pictures.

The current user logs out of the system. If the user wants to log in again, they can

click on the main menu icon and enter their username and password on the login interface to log back into the device.

.

5

FAQ

Q: No Video Output on the Monitor?

Q: Failed to Remotely Access the Camera via Mobile Phone or Computer?

Q：Does the system support motion detection and image capture?

.

6

Notification of Compliance

FCC Compliance Statement

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:

Simplified EU Declaration of Conformity

ZOSI declares that the device is in compliance with the essential requirements and other relevant provisions if Directive 2014/53/EU.

Correct Disposal of this Product This marking indicates that this product cannot be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal and promote the sustainable reuse of material resources, please recycle it responsibly. To return your used device, please visit the Return and Collection System or contact the retailer from whom the product was purchased. They can take this product away for environmentally safe recycling.

<p>The post ZOSI Wireless NVR Detail User Manual first appeared on NVR IPCAMERA SECURITY.</p>

How to upgrade older TKH Security Firmwares

The latest 360v2-series cameras firmware carries “UX“ in its firmware filename, where previously “U“ was used. This change is minor and does not mean much with regards to the functionality of the firmware. However, some older “U” do not allow direct upgrade to the latest “UX“ firmware.

In these cases, an intermediate step must be taken: first upgrade firmware to the nk20210916UX version; after this, the camera will allow the firmware upgrade to the latest version found on the public download pages.

This intermediate firmware version nk20210916UX can be downloaded from here:

https://tkhs-install-files.s3.eu-central-1.amazonaws.com/Siqura/Firmware/360v2-series+(U)/360v2-series+fixed+(nk20210916UX).zip

Load More :

1. Using Your Uniview NVR
2. How to set up Zosi POE NVR System
3. Spot AI IVR Installation Guide

Where can I find the latest firmware?

The latest firmware can you find on our website. Click here

When you can’t find the firmware for your product or you need another version.
Please contact us: support.nl@tkhsecurity.com

*How to update iProtect™ to 10.1

How to update the iProtect™ Application.

Download the latest files on our download section of the knowledgebase:

*iProtect™ – Software Downloads | Version 10.1 and lower:

Prechecks

Before the update it is required that the state of the system is known. Not functioning readers, nodes and lines must be noted.

Compatibility and discontinued hardware/software is noted in the release notes:

https://tkhsecurity.atlassian.net/l/cp/Co1YADGz

Minimal requirements:

• Firmware inbraak (Unii 2.4.0 / ML 5.0.5 / XL 3.11)

• Rootfs Pluto’s (5.68a)

• Firmware polyx (UBIFS)

• Diva/Sense (2.5)

Update

Download the Backup from the maintenance page.

Upload the new iProtect™ version at the maintenance page

• Go to the iProtect™ maintenance page (Click on the gear button on the login screen)

• Install > Upload iProtect (1)

• Click on the “…” button and select the new iProtect™ version at the maintenance page and click on the “Post” button.

When the “Check requirements” button appears, press it and a check will be done. Check the log and see what is needed to continue. This is also a good moment to install the ServicePack.

Click on the “…” button and select the ServicePack you want to install and click on the “Post” Button.

You can follow the installation process at the realtime logging, the Apache2 web server will restart multiple times, this will cause an interruption of the iProtect™ Gui and maintenance page.

You need to wait (10 minutes max) till you see the message below in the Realtime logging.

iProtect™ atlas: Installation ServicePack … finished.

Sometimes a reboot of the server is required, you will see a notification of this in the messages.

Install the new iProtect™ version at the maintenance page 

• Click on the “Check Requirements” button.

• if the check is passed you get a “Start Upgrade” button and can start the update by a click on this button.

You can follow the installation at the User interface logging, if you see the messages below the Gui is ready and you can login in iProtect™ again (only the root user can login at this point)

You must delete browser history before logging in to iProtect.

Installing the new license if iProtect version was < 10.1:

https://tkhsecurity.atlassian.net/l/cp/51UgXjhX

If a new license is needed, please contact our orderdesk.

Activating lines

To be sure all lines and nodes gets the latest software, select the system default Provisioner group.

• Go to iProtect™ menu option Installation > Hardware > Line

• Select System default at the Provisioner group options.

The components under the line config will automatically be provided with the latest firmware version.

Activate the line’s now, the Door controllers will get the new software and start with the installation automatically. The doors will be non-functional for 5-10 minutes. Open doors beforehand if they are critical.

Finishing the update

When all lines are updated and the re-index message is gone, you can finish the update with the button in the menu:

Installation > Database restore > Activate line

Some points to check:

• Readers

• Database couplings

• Client login (remove browser cache)

• Import / Export

• iNVR

• Printing badges/cards

• Intercom

• browser certificate

Camera firmware

Encoder firmware

<p>The post TKH Security Firmware Software Guide first appeared on NVR IPCAMERA SECURITY.</p>

Production Introduction

1. Product overview

The series NVR is designed specially for security and defence field and is an outstanding surveillance product. It introduces embedded LINUX operating system which is very stable. It introduces standard H.265 mp video compressed format and unique temporal and spatial filtering algorithm which insures the high quality image and low bit rate synchronous audio and video surveillance. It introduces TCP/IP network technology which achieves the strong network data transmission capability and remote control capability. The series NVR can be used individually or online applied as a part of a safety surveillance network. With the professional network video surveillance software it achieves the strong network communication ability and telecommunication ability.

How to set up Zosi POE NVR System

Read Next :

• Zosi NVR Operation – Setup Menu Guide
• Zosi DVR/NVR Firmware Software Tools DL
• How to add an IP camera to a Zosi NVR

The series NVR can be applied in the bank, telecom, electric power system, judicial system, transportation, intelligent housing, factory, storehouse, water conservancy and so on.

Open-package check and cable connections

1. Open-package check

When you receive the product, please confirm whether it is consistent with the product model you ordered and check carefully whether there is any obvious damage of the product. After opening the casing, check whether the connection between the internal data wire, power wire, fan power wire and so on and the main board are firm .Please protect the labels afifxed to the floor or rear panel , which is very important to our aftersales service work. When you contact our company for after-sales service, we need you to provide the model and serial No. on the label.

1

1. Introduce the NVR

I® I® LAN Port^^ L^-USB2.0 Port

Power Port PoE Interface Audio Output^ L®_ HDMI Port

NOTE: To ensure the device works properly, it is recommended to power on the PoE NVR first for testing before a final installation.

1. Device connection

2

@ Connect the Cameras to the PoE NVR with 60ft(18.3m) Ethernet Cable.

@ Connect the PoE NVR to the Router with 3ft(1m) Ethernet Cable.

@ Connect the PoE NVR to the Monitor with VGA or HDMI Cable.

@ Connect the USB Mouse to the USB2.0 Port.

@ Connect the PoE NVR to the Power Outlet.

@ Turn on the power switch and enjoy live view.

@ The monitor will display live view of the camera.

NOTE: To ensure the device works properly, it is recommended to power on the PoE NVR first for testing before a final installation.

1. Access the System via Smartphone or PC

Smartphone

Search “ZOSI Smart” in the APP Store or use a browser to scan the QR code below, download and install the app and follow the instructions to register an account.

Zosi Smart

App (IOS/Android)

App video operation link

PC

Download path: Go to https://www.zositech.com/pages/app.

3

_L© Basic Operation

1. Turn on

Plug the power supply, the power indicator light will illuminate and the video recorder turns on, you will hear a beep at this time. I

After startup, the default setting of the ^{Left Button Right Button}

system is multiple-screen output mode and t I

video recording starting up automatically. ¹ ^B

Mouse Operation: JH

Left Button:

• Preview or Playback Interface: w W

Double-click a single channel to enter full I

screen and double-click again to exit full screen. \ 1

• Navigation Menu: Left click to select a menu option.

Right Button:

• Right click to bring up the main menu when the mouse is on the preview interface.
• Navigation Menu: Right click to exit the menu or return to previous menu option.

1. System login

When the DVR boots up, the user must login and the system provides the corresponding functions with the user purview.

The default user name of the factory equipment is admin, and the default password is blank. You can directly log in to the system when you log in to the system for the first time after starting up.

1. Preview

After entering the preview status , double-click the left mouse button to choose the switch between the windows. The system date, time and channel name are shown in each viewing window. The surveillance video and the alarm status are shown in each window.

4

1. Desktop shortcut menu

In preview mode you can right click mouse to get a desktop shortcut menu and right click mouse again to ESC the desktop shortcut menu.

• Single – Select single channel for live viewing
• Multi – Select multi-channel for live viewing
• PTZ: Control the rotation of PTZ camera
• Start Scan – Start/Stop Scan
• Colour – Adjust colour and image settings
• E-Zoom – E-Zoom the preview interface
• Audio – Adjust the camera volume
• Snap – Snap and save the live view images
• Start/stop record
• Playback – Search Video playback and quick playback
• Intelligent Alarm – Set up Human Detection and
  Siren-Light Alarm
• IPC Channel Configuration – IPC channel
  configuration management
• Main Menu – Enter the Main Menu

1. Single Screen

Select a channel for single-screen viewing.

5

1. Multi Screen

Select the corresponding different multi-screen mode to watch.

1. PTZ

Control the rotation of the PTZ camera and set the automatic cruise/preset point cruise.

1. Start Scan

Start Scan means the system will show each live picture in order automatically according to the order of the video devices in the channel grouping. Only when the user selects the channel grouping under the display mode[main menu]>[configuration management]>[live], and it can not show all channels completely under the current preview, this button is available.

6

1. Colour

Set image parameters for all channels. The image parameters include: brightness, contrast, saturation and hue.

Channel

Default

Save

1. E -Zoom

E-Zoom for big picture of single channel.

1. Audio

Set startup, turn-off and silent mode of audio for the channel, and adjust the volume ..After select (automatic), it will start up audio of the big picture channel automatically.

7

1. Snap

Snap a screenshot of the current channel.

1. Start/stop record

After clicking start recording, the system will start full-time recording; after clicking stop recording, the system will stop full-time recording.

3.5.0 Playback

Right click the mouse – Playback – Video Playback/Quick Playback, Video Playback: Playback the video clips via time search or event search. Quick Playback: Quick playback of the first 30 minutes of video.

8

Fast Rewind

Play/Pause For_ward Multi-screen display

T

Previous Record Next Record

Previous Video: Play the previous video.

Next Video: Play the next video.

Fast forward: You can play the video clips at 1/4 time speed to 16 times speed.

Rewind: You can rewind the video clips at 1 time speed, 8 times speed, 16 times speed, and 32 times speed.

Screen Modes: Single Channel Playback/Multi-channel Playback. Channels without video playback will show a black screen.

1. Intelligent Alarm

Set up Intelligent Alarm and Siren-Light Alarm.

9

1. IPC Channel Configuration

View camera version information, add cameras, upgrade cameras, etc.

1. Main Menu

Enter the system main menu interface.

10

Q Main Menu

1. Main menu navigation

11

1. Configuration Management

Set every function parameters for the device, including: basic configuration, live configuration, recording configuration, recording plan, alarm configuration, network configuration, user management, PTZ configuration, advanced configuration.

12

1. Basic Configuration

Basic configuration includes three sub menus: system, date and time, daylight saving time.

1. The system

13

2. Date & Time

In this interface, set the date format, time format, time zone; you can also adjust the system time manually.

Note: the default time zone of the system is GMT.

You can select [Time Synchronization] to correct time. Network time server can be set.

1. DST(Day Light Saving)

Set the start and end time of daylight saving time by week or date.

14

1. Live Configuration

Live configuration includes three submenu: Live, Main Monitor, Video Blind.

1. Live

1. Main Monitor

15

3. Video Blind

Users can cover up some areas of the live picture, maximum of five areas per channel. [Setting] After entering the live picture , press and hold the left mouse button, drag the mouse to set the blocked area , then click [apply]to save the settings; Double-click on the area you want to delete, later changed into a black area, right-click, Exit. then click [apply] can delete the blocked area.

1. Recording Configuration

Record configuration includes six submenus: Enable,Record Bitrate,Stamp,Recycle Record,Snap.

1. Enable

16

1. Record Bitrate

Check the main stream and sub stream information. [Resolution] Display/select camera resolution. [Code rate] Show camera code rate.

1. Stamp

17

1. Recycle Record

After selecting this item , When the hard disk is full, it will automatically cover the earliest files and continue recording ; Otherwise, it will automatically stop recording and prompt “The remaining space is insufficient” on the screen.

Record O

1. Snap

View screenshot information.

18

1. Schedule

Schedule includes three submenus: timing recording, motion alarm recording, and intelligent recording.

1. Timing Recording

Select the channel: Double click the left mouse button, edit the week plan, as shown in the picture.

19

1. Motion Alarm Recording

The setting method is the same to the timing recording setting, please refer to the timing recording settings.

Note: The default Schedule for Motion alarm is all selected.

1. Intelligent alarm

The setting method is the same to the timing recording setting, please refer to the timing recording settings.

Note: The default Schedule for intelligent alarm is all selected.

20

1. Alarm Configuration

Alarm configuration includes five submenus: Motion detection, Video loss, Other alarm,Intelligent alarm,Siren-Light alarm.

1. Motion Detection

Motion detection includes two submenus: motion detection and schedule.

1-1. Motion Detection

By analyzing the video image, when the system detects a mobile signal which reaches a preset sensitivity, motion detection alarm and the linkage function are initiated.

21

1-2. Recording Schedule

The setting of Motion Detection Schedule is the same to that of Timing Recording, For the detailed steps please refer to 4.2.4 – [Recording Schedule] [Timing Recording]. Note: The default schedule of motion detection is all selected.

2. Video Loss

The setting of video loss alarm processing is the same to that of motion detection alarm processing.

22

1. Other Alarm

1. Intelligent alarm

23

1. Siren-Light Alarm

Siren-Light Alarm