How to reset TVI DVR/ POE NVR / Wireless NVR (ZSWNVK-H) System when you forgot the password?

1) You can find the correct model number on the label at the bottom of the DVR / NVR System.

2) Find the DVR / NVR’s device ID/UID.

A. You can find the DVR’s ID on the label of the DVR / NVR.

How to reset Password Zosi DVR NVR Poe All Model

B. Or you can also reboot the DVR / NVR system and wait until Wizard Page display, then find the UID.

3) Please send us the model number and device ID / UID, we will create a super password for you.

    NOTE: The User Name corresponding to super password must be ‘admin’.

                 Once you set super password this time, the login password should be blank

                 in the next time when you reboot it or log in again.

                 You can go to DVR’s Main Menu – Setup – User – Change password to set a new

                 password. (Please keep the old password blank, you just need to input the new

                 password and confirm password.)

Beyond that, you can also upgrade software by means of upgrade file from us, then reset password when reboot DVR.

Connecting the DVR / NVR to the internet

This method works for the following models of DVRs / POE NVRs / Wireless NVRs:

4-Channel DVRs / POE NVRs / Wireless NVRs:

ZR04ZN;   ZR04ZM;   ZR04FN;   ZR04FM;   ZR04CN;   ZR04CM;   ZR04JS;   ZR04TS;   ZR04TN

ZR04RN;   ZR04RM;   ZR04EN;   ZR04EM;   

ZR04DS;   ZR04MS;  

8-Channel DVRs / POE NVRs / Wireless NVRs:

ZR08ZN;   ZR08ZM;  ZR08FN;   ZR08FM;   ZR08BN;   ZR08BM;   ZR08CN;   ZR08CM;   ZR08KS;   ZR08TN

ZR08RN;   ZR08RM;   ZR08EN;   ZR08EM;      

ZR08DS;   ZR08DP;   ZR08MS;   

16-Channel DVRs:

ZR16ZK;   ZR16JK;   ZR16BK;   ZR16CK

(You can find the model number on the label at the bottom of the DVR.)

If your CCTV DVR or NVR don’t have a built-in WiFi support, then you have to run internet cable (CAT 5 or CAT 6 Ethernet cable) to connect your DVR or NVR to the internet via the router.

• Connect one end of the Ethernet cable to the Ethernet input on the back of the DVR.
• Connect the other end of the Ethernet cable into a device providing an active internet connection, such as a router or modem.
• Test your internet connection to confirm that it is active by going to the Network > Network screen.

1) Right click mouse—go to Main Menu > Setup > Network.

2) On the Network tab, ensure the “Obtain an IP Address Automatically” option is enabled, and that there is no information in the PPPoE fields.

3) Once you’ve ensured there is no information in the PPPoE field and that the “Obtain and IP Address Automatically” option is selected, select the “Test” option.

If “OK” is displayed, the local area network is connected successfully.

If the DVR is not able to connect to the internet, you will get a message that states “Cannot Connect to Network”.

NOTE:

In order for other devices to connect to the DVR through the router, the DHCP setting must be enabled from the router’s settings page.

If you still cannot connect to the network, please ensure that you don’t have a firewall active on your network that may be limiting the connection.

You may need to open ports 80, 5000, and 5001 on your router, if they’re currently being blocked by te firewall. This typically only happens on commercial internet accounts, as they deal with sensitive transactions, but occasionally a firewall on a residential line will also block these ports.

If you’re unsure how to open ports on your router, you will need to speak with the router manufacturer.

FAQ:

1) What’s DHCP?

DHCP is a type of internet networking approach. It stands for Dynamic Host Configuration Protocol. It means that a router assigns IP addresses to each of the devices on the network, allowing them to communicate with other devices in or outside the network.

In context of our systems, the setting related to DHCP is called DHCP server status. This setting enables your router to obtain the static IP address on the DVR and broadcast that IP to the app so it can locate your DVR. This setting needs to be enabled on a router for the apps to be able to connect to the DVR systems.

2) For example: How to set up a linksys E5350 Router?

Once you’ve logged into the router settings, you’ll want to select “configuration” at the top, and then “Connection > Local Network” in the menu on the left. You should see this page:

​

You’ll want to ensure the checkbox beside “DHCP server” is checked off, and set the start IP address to 100 as shown in the image. Leaving the other settings here as they default should be fine. Once this is done, select “save.” Before proceeding with the next steps, try using the app while not connected to local WiFi. If you can see the live feeds, you don’t need to complete the steps below.

If you can’t, you’ll need to open the ports in the firewall. On the left menu, select “Security”, and then “Single Port forwarding” as shown in this image:

​

Select the button on this page for “Add a new Single Port Forwarding”, and this window should appear:

​

The number you want to enter in the “To IP Address” field is the last three digits of the DVR’s static IP, which you can find on the Network page of the DVR. (Main Menu > Setup > Network)

Application and protocol can be left as they are, and you’ll want to check off the “enabled” box. You’ll need to do this 3 times, using the following information:

1.
Application Name: DVR HTTP
External Port: 80
Internal Port: 80

2.
Application Name: DVR Mobile
External Port: 5000
Internal Port: 5000

3.
Application Name: DVR E-mail
External Port: 5001
Internal Port: 5001

After filling the box with the necessary info for each port, select “apply”, and then hit the add button again to reopen the window. Once all 3 ports are opened, try testing the app again.

Note:  different Routers may have different setting interfaces.

More questions, please feel free to contact us.

Our Whatsapp:  +1-866-841-6932

Support Email address:  service@zositech.com

Our Facebook:  https://www.facebook.com/ZosiTechnology/

Support center: support@zositechhelp.zendesk.com

<p>The post How to reset Password Zosi DVR NVR Poe All Model first appeared on NVR IPCAMERA SECURITY.</p>

.

Production Introduction

The NVR series is a HD surveillance product that designed for security field. It uses an embedded operating system to ensure stable system performance. It adopts the standard H.265 video compression algorithm and a unique spatial-temporal filtering algorithm to achieve high-quality, low-bitrate synchronous audio and video and 24/7 video recording. With TCP/IP network technologies, it has powerful network data transmission and remote control capabilities.

The NVR can be used locally or online applied as a part of a safety surveillance network. With professional network video surveillance software, it fully demonstrates its strong networking and telecommunication capabilities.

This NVR can be applied to security measures in various fields and departments such as banking, telecommunications, electric power system, judiciary system, transportation, smart communities, factories, warehouses and water facilities.

.

Unboxing and Initial Setup

When you receive this product, please confirm that it matches the model you ordered and carefully inspect the device for any obvious damage. After opening the casing, check whether the data cable, power cable, and other connections inside the device are firmly connected to the main board.

Please protect the labels attached to the bottom or back panel, which is very important to our after-sales service work. When contacting our company for after-sales service, you will need to provide the model and serial number on the order label.

1.2What’s in the box

or

.

NVR  Power Supply  USB Mouse

.

.

.

.

Quick Start Guide

.

Ethernet Cable  HDMI Cable  Quick Start Guide

Note: Products and accessories vary by product models, please refer to the actual product.

➊  Antenna   

USB Backup

.

Network Port

.

HDMI Port

VGA Port Audio Port

USB Mouse Power Port

.

❷  Antenna

.

.

HDMI Port

LAN Port USB 2.0 Port Type-C

NOTE: The picture shown is for reference only. Actual appearance is subject to the model you purchased.

➊

USB Backup

4

Monitor

3

2

1

Route

.

.

.

.

.

.

.

.

.

.

❷

USB 2.0 Port

LAN Port

Battery Camera

3

1

2

4

ZOSI Wireless NVR Detail User Manual

Read More : How to set up Zosi POE NVR System

.

.

.

.

.

.

HDMI Port  Type-C

Ⓒ Connect the NVR to the Router with Ethernet Cable.

Ⓒ Connect the NVR to the Monitor with HDMI Cable or VGA Cable. (VGA Cable is not included)

Ⓒ Connect the USB Mouse to the USB2.0 Port.

Ⓐ Connect the NVR to the Power Supply.

Ⓒ The monitor will display live view of the camera.

NOTE: To ensure the device works properly, it is recommended to power on the NVR first for testing before a final installation.

Via Smartphone

Search “ZOSI” in App Store, or use a browser to scan the QR code below to download and install the App, and follow the on-screen instructions to complete the initial setup.

.

App video operation link

.

Via PC

Download: https://www.zositech.com/app/

.

Basic Operation

After connecting the power supply, the power indicator light will turn on, and the device

will start up. At this time, you will hear a “beep” from the buzzer. By default, the system is in multi-screen mode.

Mouse Use:

Left-click:

Double-click a single-channel to make it full screen, and double-click again to return to the multi-channel display.

.

Left-click

Right-click

After the device is powered on normally, you need to log in to the system before operating it. The system will provide corresponding functions according to the permissions of the logged-in user.

The default for the device is “admin” and the default password is blank. You can log in to the system directly the first time after powering on.

After entering the preview page, double-click the left mouse button to switch between single or multiple display. On each preview screen, the date, time, and channel name can be displayed, and each screen display the recording and alarm status of the monitoring channel.

.

.

Motion Detection Triggered

.

.

Recording

.

.

Human-Figure Detection Triggered

Face detection Triggered

.

.

Vehicle Detection Triggered

.

.

.

.

Quickly enter the playback page Quickly enter the backup page Quickly enter the device information page Quickly enter the device network page Quickly enter the current camera configuration page Quickly enter the recording schedule page.

In preview mode, click the right mouse button to bring up the quick menu, and click the right mouse button again to exit the quick menu.

Single: Select single channel for live viewing Multi: Select multi-channel for live viewing

Start Scan: Start Scan refers to the system automatically

displaying each live video in sequence according to

theorder of the devices in channel lists.

Colour: adjust the brightness, hue, saturation, and contrast of the channel.

E-Zoom: Zoomed in digitally up to 4X or 8X of single channel.

Audio: Set the audio settings for each channel to enable, disable, or mute audio, and adjust the volume. When

[Auto] is selected, the audio will be enabled automatically when switching to the full-screen display

Snap: Snap and save the live view images

PTZ: Control the rotation of the PTZ camera and set the automatic cruise/preset point cruise.

Stop Record: Stop /Start Recording

Time Playback: As described in 3.4.2 below Intelligent Detection: Set up Intelligent detection and Siren Light Alarm

IPC Channel Configuration: IPC channel configuration management,upgrade cameras, etc.

Main Menu: Ether the Setting Menu

.

Pause/Play Prev Frame  Next Frame

Mute  Backup  E-Zoom

Exit

.

.

.

Backup: Enter the backup page.

Rewind Fast Forward

Speed up Speed down

Fast Forward: Play video clips at speeds ranging from 1/16x to 16x. Rewind: Play video clips in reverse at speeds ranging from 1/16x to 16x. Speed down: Play the video from the previous 30 minutes.

Speed up: Play the video from the next 30 minutes.

The function takes effect when the pause button is pressed.

Prev Frame: Play video frame by frame. Next Frame: Rewind video frame by frame.

.

Main Menu

Set functional parameters of the device, including: Basic Configuration, Live Configuration, Recording Configuration, Recording Schedule, Alarm Configuration, Network Configuration, User Management, PTZ Configuration, Advanced Configuration.

Basic configuration contains 3 sub-menus: System, Date & Time, and DST

.

[System Type]: The name of the system displayed on the client [Model Number]: Used for controlling multiple NVRs with one remote control [Password Check]: Checking this option means that users must enter a username and password in the system settings and have the corresponding permissions to perform certain operations. [Show System Time]: Choose whether to display the time on the scene. [Max Online Users]: Set the number of network users who can access the device. [Video Output]: Users can select output resolutions 1024×768, 1280×1024, 1920×1080, 2560X1440，etc..

[Logout After (Minutes)]: The system automatically logs out after a set time of inactivity. [Startup Wizard]: Whether to display the wizard on startup.

.

Set the start and end times of daylight saving time through the week or date.

Live configuration contains 3 sub-menus: Live, Main Monitor, and Video Video Masking.

1.Live

.

.

.

.

.

.

.

[Camera Name] Click on the camera name, and a software keyboard will pop up. Users can modify the camera name as needed.

Click on the Shift key to switch input method. [Colour] Users can adjust the brightness, hue, saturation, and contrast of the channel.

Configure display window format for the patrol view

Users can mask certain areas in the scene, max 5 areas.

[Mask Setting] Enter the live view, hold down the left mouse button, drag the mouse to set the blocked area, click [Save] to save the setting.

Double-click the area that needs to be deleted, and the area will turn black. Right-click

to exit, and then click[Save] to delete the blocked area.

.

Recording configuration contains 4 sub-menus: Enable, Video Quality, Time Stamp , and Snap.

Enable/disable recording functions for a specific channel, or set all channels to default enable. All channels default to enabling circular recording.

.

Note：These functions are not optional [Resolution] The recording resolution for each channel [FPS] The number of frames per second transmitted by the camera image [Max Bitrate] Camera supports maximum transmission bitrate

[Camera Name] Select whether to display the camera name or not [Time Stamp] Select whether to display time on this channel or not [Position] Click this button and users can use the mouse to drag the camera name and timestamp to any position on the live screen.

Recording schedule contains 3 submenus: Schedule, Motion, PIR/intelligent.

.

[Apply Setting to]Apply the recording schedule of a certain channel to other channels or all channels.

[Add] Add a recording schedule for a certain day [Delete] Delete the selected schedule

.

[Enable] After selected, the Motion detection function of the corresponding channel is turned on, and it is enabled by default [Holding Time] Select the alarm delay time for the channel, which can be set to 5s, 10s, 20s, 30s, 60s, 120s, or Always on. [Push Time] Set the time interval for pushing alarm notification to the mobile App, which can be set to 1min, 2min, 3min, 5min, 8min, or 10min. [Trigger] After the camera detects an alarm, the enable function is triggered

[Buzzer] When selected, the buzzer will sound when an alarm triggered [Show Full Screen] When there is an alarm trigger, the alarm will pop up in fullscreen display

[To Alarm Out] Select to trigger the alarm output on a specified channel [Email] When an alarm is triggered, the system will send relevant information to the user’s designated email, such as the alarm event, snapshot, device name, device number, etc. [Snap] When an alarm is triggered, the system will automatically capture and save images of the selected channel [To Record] Select the channel to trigger recording

[Area] In this interface, users can drag the scroll bar to adjust the sensitivity value (1-8), the default value is 7, the smaller the value, the higher the sensitivity. Because the sensitivity is affected by factors such as color and time (day or night), users should adjust the value according to the actual situation.

.

Click or drag the mouse to select or erase the detection area.

[ALL] set the entire field of view as a s ensitive area

[Save]Click to save settings

[Clear] clear the current detection area  [Exit] exit the current setting

interface

The sensitivity index ranges from 1 to 8. The default sensitivity is 7. The lower the value, the more sensitive. The higher the value, the less sensitive.

Note: It is best not to have flags,trees or other objects that are easy to flutter in the wind in the grid for motion detection to avoid false alarms.

[Schedule]

The setting of the motion detection schedule is the same as that of the scheduled recording. Please refer to 4.2.4 [Recording Schedule]-[Schedule] for specific setup steps. This function controls the effective time of the motion detection feature. Note: The default schedule for motion detection is to Select All.

.

[Channel] Select the channel for setting. [Holding Time] Select the alarm delay time for the channel. Options: 5s, 10s, 20s, 30s, 60s, 120s, Always [Push Time] Set the time interval for alarm notifications to be sent to the App.

Options: 1min, 2min, 3min, 5min, 8min, 10min [Trigger] The setup method is the same as Motion detection. Please refer to 4.2.5 Alarm Configuration – Motion detection-[Trigger]. [Schedule] PIR detection schedule setting is the same as Motion Detection. For detailed instructions, please refer to 4.2.5 Alarm Configuration-Motion Detection-[Schedule].

This feature controls the effective time of PIR detection.

[Channel] Select the channel for setting. [Enable] Set to select the alarm type such as human detection, face detection, vehicle detection, etc.All selected by default [Holding Time] To select alarm delay time of the channel .Optional time: 5/10/20/30/ 60/120s always. [Push time] Select the channel APP alarm push time, optional 1/2/3/5/8/10 minutes. [Trigger] The setup process is the same as for Motion detection configuration. Please refer to 4.2.5 Alarm Configuration – Motion detection-[Trigger] [Area ] After entering the live screen, press and hold the left mouse button, drag the mouse to set the intelligent detection area, click [Save] to save the settings; double- click the set area again to delete the human figure detection area.

Note: The default is to set the whole region. [Schedule]The schedule settings for intelligent detection alarm are the same as motion detection. For detailed instructions, please refer to 4.2.5 motion detection-Schedule. This feature controls the effective time of intelligent detection

4.Siren-Light-Alarm This page includes camera detection settings, alarm type, night vision mode, volume adjustment, and more

.

[Enable] After selected, the vehicle detection function of the corresponding channel is turned on, and it is enabled by default After opening, the sound and light alarm function of each channel can be set. [Alarm level] can choose strong sound and light alarm, slight sound and light alarm, strong sound alarm, slight sound alarm, strong light alarm [Alarm type] can choose motion detection, intelligent alarm, motion detection and intelligent alarm [Night Vision Mode] Black and White Night Vision, Full Color Night Vision, Intelligent Night Vision;

[Volume] Adjust the current channel ‘s volume [Manual alarm] Set manual sound and light alarm [Waning Light] can turn on and off the LED warning light of the camera

When the video loss, the NVR triggers alarm actions.

.

[Buzzer] When an alarm occurs, the device emits two long beeps. [Show Full Screen] When an alarm is triggered, the system will show the current channel with the whole monitor [Email] When an alarm is triggered, the system sends the alarm event message to the user’s specified email address.

[Alarm Types] Including Disk Full, IP Conflict, Disconnect, Disk Shortage Alarm,

Disk lost

[Buzzer] When an alarm occurs, the device emits two long beeps.

[Email] When an alarm is triggered, the system sends relevant information such as the alarm event, snapshots, device name, and device ID to the user’s specified email address.

[Disk Shortage Alarm] When the remaining capacity of the hard disk reaches the set value, an alarm will be triggered.

.

Network Configuration contains 3 sub-menus: Network, Email, WIFI Network

.

[HTTP Port] 80 by default [Server Port] 5000 by default [Mobile Port] 5001 by default

[Obtain an IP Address Automatically] Enable automatic IP address acquisition [IP Address] Set the IP address of the device [Subnet Mask] Set the subnet mask of the device [Gateway] Set the default gateway of the device [Preferred DNS Server] This address is provided by your internet service provider (ISP). It must be filled in when using mobile monitoring.

[Alternate DNS Server] This address is provided by your internet service provider (ISP). [PPPOE] Enable this option to establish a network connection using PPPoE. The connected IP address can be checked in[Main Menu]- [Information]- [Network] [User Name] Enter ISP (provided by Internet Service Provider) [Password] The password set [Test] Test whether the input IP address or PPPoE information is valid

[SMTP Server] Mail server address, which can be an IP address or a domain name (if it is a domain name, ensure that DNS is correctly configured for proper resolution). For example: smtp.gmail.com [Port] Mail server port number, the default port is 465 [SSL Check] Enable SSL (Secure Socket Layer) protocol for secure login [Send Address] The email address of the mail server [Password] The password for the sender’s email address [Receive Address] When an alarm occurs, it will be sent to the set email address. Up to 3 recipient email addresses can be set [Test] Test the current email configuration to check if it is successful.

This page shows the AP information of NVR，To protect user privacy, we hide important information [wifi channel]You can choose the camera WiFi channel，optional WiFi channel 1、2、3、4、5、6、7、8、9、10、11、12、13、other [Area] optional Area:MKK、EU、FCC、OTHER

[Add] : Add a username and set the user’s permissions. Clicking on it will bring up the following interface:

.

User can configure PTZ settings

Click the [Setting] button, and the following window will pop up: The user can adjust the PTZ camera to a suitable position through the button on the tool bar, click [preset call], the preset point is set successfully, and a maximum of 4 can be set. [Start preset point cruise] If enabled, the camera rotates according to the user’s preset point position sequence. [Start automatic cruise] If enabled, the camera will rotate horizontally at a certain speed. [Humanoid Tracking] If enabled, the camera will automatically turn on human tracking.

Advanced Setup contains 2 sub-menus: Reset, System Maintenance

.

[Reset] Restore all settings to factory settings [System Maintenance] The video recorder defaults to restart automatically every week at 2:00 am on Monday. User can choose to restart Daily, Weekly, Never.

.

Select a channel and start playing [Search] Search the video files for the selected channel and time. Click the Play icon to start playback.

NOTE: Dates in the calendar marked with blue squares indicate recorded footage.

1.3.2Event Search

[Search] Search the video files for the selected channel and time. Choose the desired time, click Search and select the file, and double-click the mouse to start playback.

[Search] Search for images for the selected channel and time. [Save] Save the currently displayed image to a portable storage device. [Save All] Save all captured images to a portable storage device.

NOTE:

1.The system’s default storage capacity for images is 2000. If the number exceeds 2000, the system will automatically overwrite previously unlocked images.

2.Double-click an image to play back the video from the time when the image was captured.

1.4Backup

.

By configuring the settings, the video files in the device can be backed up to the external storage device.

NOTE: Before backing up files, make sure to install a storage device that can accommodate the backup files. [Search] Select the files to be backed up based on the time and channel.

[Backup]Select the file that you want to back up in the list and click Backup. The video recorder backs up the video file to the USB flash drive.

Information contains 6 sub-menus: System, Event List, Network, Online Users List and System Update

.

.

.

.

.

[Refresh] Re-detect recognizable hard drives. [Browse] View information of the selected hard drive, including capacity, remaining space, disk status, attributes, total number of pictures that can be stored, and number of pictures that have been saved. [Format]: Delete data in the selected hard drive, including locked files and pictures.

The current user logs out of the system. If the user wants to log in again, they can

click on the main menu icon and enter their username and password on the login interface to log back into the device.

.

5

FAQ

Q: No Video Output on the Monitor?

Q: Failed to Remotely Access the Camera via Mobile Phone or Computer?

Q：Does the system support motion detection and image capture?

.

6

Notification of Compliance

FCC Compliance Statement

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:

Simplified EU Declaration of Conformity

ZOSI declares that the device is in compliance with the essential requirements and other relevant provisions if Directive 2014/53/EU.

Correct Disposal of this Product This marking indicates that this product cannot be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal and promote the sustainable reuse of material resources, please recycle it responsibly. To return your used device, please visit the Return and Collection System or contact the retailer from whom the product was purchased. They can take this product away for environmentally safe recycling.

<p>The post ZOSI Wireless NVR Detail User Manual first appeared on NVR IPCAMERA SECURITY.</p>

Production Introduction

1. Product overview

The series NVR is designed specially for security and defence field and is an outstanding surveillance product. It introduces embedded LINUX operating system which is very stable. It introduces standard H.265 mp video compressed format and unique temporal and spatial filtering algorithm which insures the high quality image and low bit rate synchronous audio and video surveillance. It introduces TCP/IP network technology which achieves the strong network data transmission capability and remote control capability. The series NVR can be used individually or online applied as a part of a safety surveillance network. With the professional network video surveillance software it achieves the strong network communication ability and telecommunication ability.

How to set up Zosi POE NVR System

Read Next :

• Zosi NVR Operation – Setup Menu Guide
• Zosi DVR/NVR Firmware Software Tools DL
• How to add an IP camera to a Zosi NVR

The series NVR can be applied in the bank, telecom, electric power system, judicial system, transportation, intelligent housing, factory, storehouse, water conservancy and so on.

Open-package check and cable connections

1. Open-package check

When you receive the product, please confirm whether it is consistent with the product model you ordered and check carefully whether there is any obvious damage of the product. After opening the casing, check whether the connection between the internal data wire, power wire, fan power wire and so on and the main board are firm .Please protect the labels afifxed to the floor or rear panel , which is very important to our aftersales service work. When you contact our company for after-sales service, we need you to provide the model and serial No. on the label.

1

1. Introduce the NVR

I® I® LAN Port^^ L^-USB2.0 Port

Power Port PoE Interface Audio Output^ L®_ HDMI Port

NOTE: To ensure the device works properly, it is recommended to power on the PoE NVR first for testing before a final installation.

1. Device connection

2

@ Connect the Cameras to the PoE NVR with 60ft(18.3m) Ethernet Cable.

@ Connect the PoE NVR to the Router with 3ft(1m) Ethernet Cable.

@ Connect the PoE NVR to the Monitor with VGA or HDMI Cable.

@ Connect the USB Mouse to the USB2.0 Port.

@ Connect the PoE NVR to the Power Outlet.

@ Turn on the power switch and enjoy live view.

@ The monitor will display live view of the camera.

NOTE: To ensure the device works properly, it is recommended to power on the PoE NVR first for testing before a final installation.

1. Access the System via Smartphone or PC

Smartphone

Search “ZOSI Smart” in the APP Store or use a browser to scan the QR code below, download and install the app and follow the instructions to register an account.

Zosi Smart

App (IOS/Android)

App video operation link

PC

Download path: Go to https://www.zositech.com/pages/app.

3

_L© Basic Operation

1. Turn on

Plug the power supply, the power indicator light will illuminate and the video recorder turns on, you will hear a beep at this time. I

After startup, the default setting of the ^{Left Button Right Button}

system is multiple-screen output mode and t I

video recording starting up automatically. ¹ ^B

Mouse Operation: JH

Left Button:

• Preview or Playback Interface: w W

Double-click a single channel to enter full I

screen and double-click again to exit full screen. \ 1

• Navigation Menu: Left click to select a menu option.

Right Button:

• Right click to bring up the main menu when the mouse is on the preview interface.
• Navigation Menu: Right click to exit the menu or return to previous menu option.

1. System login

When the DVR boots up, the user must login and the system provides the corresponding functions with the user purview.

The default user name of the factory equipment is admin, and the default password is blank. You can directly log in to the system when you log in to the system for the first time after starting up.

1. Preview

After entering the preview status , double-click the left mouse button to choose the switch between the windows. The system date, time and channel name are shown in each viewing window. The surveillance video and the alarm status are shown in each window.

4

1. Desktop shortcut menu

In preview mode you can right click mouse to get a desktop shortcut menu and right click mouse again to ESC the desktop shortcut menu.

• Single – Select single channel for live viewing
• Multi – Select multi-channel for live viewing
• PTZ: Control the rotation of PTZ camera
• Start Scan – Start/Stop Scan
• Colour – Adjust colour and image settings
• E-Zoom – E-Zoom the preview interface
• Audio – Adjust the camera volume
• Snap – Snap and save the live view images
• Start/stop record
• Playback – Search Video playback and quick playback
• Intelligent Alarm – Set up Human Detection and
  Siren-Light Alarm
• IPC Channel Configuration – IPC channel
  configuration management
• Main Menu – Enter the Main Menu

1. Single Screen

Select a channel for single-screen viewing.

5

1. Multi Screen

Select the corresponding different multi-screen mode to watch.

1. PTZ

Control the rotation of the PTZ camera and set the automatic cruise/preset point cruise.

1. Start Scan

Start Scan means the system will show each live picture in order automatically according to the order of the video devices in the channel grouping. Only when the user selects the channel grouping under the display mode[main menu]>[configuration management]>[live], and it can not show all channels completely under the current preview, this button is available.

6

1. Colour

Set image parameters for all channels. The image parameters include: brightness, contrast, saturation and hue.

Channel

Default

Save

1. E -Zoom

E-Zoom for big picture of single channel.

1. Audio

Set startup, turn-off and silent mode of audio for the channel, and adjust the volume ..After select (automatic), it will start up audio of the big picture channel automatically.

7

1. Snap

Snap a screenshot of the current channel.

1. Start/stop record

After clicking start recording, the system will start full-time recording; after clicking stop recording, the system will stop full-time recording.

3.5.0 Playback

Right click the mouse – Playback – Video Playback/Quick Playback, Video Playback: Playback the video clips via time search or event search. Quick Playback: Quick playback of the first 30 minutes of video.

8

Fast Rewind

Play/Pause For_ward Multi-screen display

T

Previous Record Next Record

Previous Video: Play the previous video.

Next Video: Play the next video.

Fast forward: You can play the video clips at 1/4 time speed to 16 times speed.

Rewind: You can rewind the video clips at 1 time speed, 8 times speed, 16 times speed, and 32 times speed.

Screen Modes: Single Channel Playback/Multi-channel Playback. Channels without video playback will show a black screen.

1. Intelligent Alarm

Set up Intelligent Alarm and Siren-Light Alarm.

9

1. IPC Channel Configuration

View camera version information, add cameras, upgrade cameras, etc.

1. Main Menu

Enter the system main menu interface.

10

Q Main Menu

1. Main menu navigation

11

1. Configuration Management

Set every function parameters for the device, including: basic configuration, live configuration, recording configuration, recording plan, alarm configuration, network configuration, user management, PTZ configuration, advanced configuration.

12

1. Basic Configuration

Basic configuration includes three sub menus: system, date and time, daylight saving time.

1. The system

13

2. Date & Time

In this interface, set the date format, time format, time zone; you can also adjust the system time manually.

Note: the default time zone of the system is GMT.

You can select [Time Synchronization] to correct time. Network time server can be set.

1. DST(Day Light Saving)

Set the start and end time of daylight saving time by week or date.

14

1. Live Configuration

Live configuration includes three submenu: Live, Main Monitor, Video Blind.

1. Live

1. Main Monitor

15

3. Video Blind

Users can cover up some areas of the live picture, maximum of five areas per channel. [Setting] After entering the live picture , press and hold the left mouse button, drag the mouse to set the blocked area , then click [apply]to save the settings; Double-click on the area you want to delete, later changed into a black area, right-click, Exit. then click [apply] can delete the blocked area.

1. Recording Configuration

Record configuration includes six submenus: Enable,Record Bitrate,Stamp,Recycle Record,Snap.

1. Enable

16

1. Record Bitrate

Check the main stream and sub stream information. [Resolution] Display/select camera resolution. [Code rate] Show camera code rate.

1. Stamp

17

1. Recycle Record

After selecting this item , When the hard disk is full, it will automatically cover the earliest files and continue recording ; Otherwise, it will automatically stop recording and prompt “The remaining space is insufficient” on the screen.

Record O

1. Snap

View screenshot information.

18

1. Schedule

Schedule includes three submenus: timing recording, motion alarm recording, and intelligent recording.

1. Timing Recording

Select the channel: Double click the left mouse button, edit the week plan, as shown in the picture.

19

1. Motion Alarm Recording

The setting method is the same to the timing recording setting, please refer to the timing recording settings.

Note: The default Schedule for Motion alarm is all selected.

1. Intelligent alarm

The setting method is the same to the timing recording setting, please refer to the timing recording settings.

Note: The default Schedule for intelligent alarm is all selected.

20

1. Alarm Configuration

Alarm configuration includes five submenus: Motion detection, Video loss, Other alarm,Intelligent alarm,Siren-Light alarm.

1. Motion Detection

Motion detection includes two submenus: motion detection and schedule.

1-1. Motion Detection

By analyzing the video image, when the system detects a mobile signal which reaches a preset sensitivity, motion detection alarm and the linkage function are initiated.

21

1-2. Recording Schedule

The setting of Motion Detection Schedule is the same to that of Timing Recording, For the detailed steps please refer to 4.2.4 – [Recording Schedule] [Timing Recording]. Note: The default schedule of motion detection is all selected.

2. Video Loss

The setting of video loss alarm processing is the same to that of motion detection alarm processing.

22

1. Other Alarm

1. Intelligent alarm

23

1. Siren-Light Alarm

Siren-Light Alarm

All

|D |O Both (Loud) ^w | Motion ^w | |

Default Exit

After opening, the sound and light alarm function of each channel can be set.

24

1. Network Configuration

Network configuration includes two submenus: Network, Email.

6-1 Network

25

6-2 Email

1. User Management

26

The default administrator name is admin, there is no password set.

Note: The length of the user name and password is no more than 32 characters. [Add] Add a user name and set the user’s permissions.

27

1. PTZ

1.[Preset] Click the [Setting] button, and the following window will pop up:

The user can adjust the PTZ to a suitable position through the button on the tool bar, click [Save], the preset point is set successfully, and a maximum of 4 can be set.

1. Advanced Configuration

Advanced setting includes three submenus: Reset, Import/Export,system maintenance.

28

1. Through ‘’Import/Export”,you can export the parameters to other devices directly.

There is no need to reconfigure other devices.

1. The system language can be changed by import language files.

1. Data Retrieval

Mainly includes Time Search, Event Search, and Image.

1. Time Search

Select the channel to play

Start playing

Note: The highlighted date in the calendar indicates there is video file on that day .

29

1. Event Search

1. Image

30

Note: 1. The default number of storage image is 2000. If it is more than 2000, the system will automatically overwrite the previously unlocked images.

2. Double-click the image, you can playback the video from the time when the image was captured.

1. Backup

By setting, you can backup the video file to the external storage device

Note: You need to install the storage device capable of accommodating the storage files before backuping the files.

31

Disk cleanup: to delete all files in the external storage device.

1. View Information

Including five submenus: system information, event information, system log, network status, and online users and other relevant information.

32

1. System

To display the basic information about this device, including hardware information, software version number, release date, and phone port number .

1. Event list

Users can select the event information of motion detection alarm, sensor alarm, video loss alarm and so on which users need to inquire about according to time and channel.

33

1. Log list

Users can search the operation information of the login user based on time and the operation type. After formatting the hard disk, the information will be cleared.

1. Network

Users can view the related parameters of the network settings.

34

1. Online Users list

See the network user information connecting the local NVR.

1. Disk Management

35

1. Log User off

The current user logs out of the system. If the user wants to log in again, click the main menu icon and enter the user name and password on the login interface to log in to the device again.

1. Manual Maintenance

If manual maintenance is confirmed, the system will automatically restart.

1. Upgrade Maintenance

36

<p>The post How to set up Zosi POE NVR System first appeared on NVR IPCAMERA SECURITY.</p>

1. Once you have installed AVSS (download AVSS PC Client  / AVSS Mac Client ) to the directory of your choice, open the application by double clicking on the icon on your desktop.

2. When AVSS opens, enter your Zosi account name and password. These will be the same credentials you use to access the Zosi Smart App for iOS and Android.

If you don’t have a Zosi Account, select the register option and complete the fields.

It’s strongly recommended that you set up your account using the Zosi Smart app, as you will be able to utilize the QR code found in the DVR’s Information > System screen. CLICK HERE for Instructions on how to connect your Zosi Smart app to your DVR.

3. Once you’re logged in, select the drop-down icon to the right of the “Device List” option. This will reveal the Device List. 

4. Once your Device List is revealed, select the drop-down icons to the left of the device option to reveal your cameras.

The blue square highlighting 1/4th of the quadrant represents the area that you will assign your channels to. From the Device List, double-click on the channel you wish you assign to the quadrant.

5. Once you double click your selected channel, it will begin playing in the assigned quadrant. It may take several seconds to load the stream, and depending on your internet connection, may take longer with each stream you view simultaneously.

Select the next quadrant by clicking on the black box. This will highlight the quadrant in a red box. Continue assigning your channels to the quadrants as desired. 

If you wish to view more than 4 cameras at once, select a separate layout by clicking one of layout icons located below the videos.

If you want to add the device on your AVSS client, please select “Add Device” to add the device.

Please let us know if you have any questions:

<p>The post How to use AVSS – PC Mac Client first appeared on NVR IPCAMERA SECURITY.</p>

• ZR08MN / ZR08MM and ZR08MS_V1.6.2 Upgrade File_rootfs-3520dv400
• ZR04TN_V1.6.1 Upgrade File_rootfs-3531dv100
• ZR04CN and ZR04CM_V1.6.1 Upgrade File_rootfs-3520dv400
• ZR04ZN and ZR04ZM_V1.4.4 Upgrade File_rootfs-hi3520d
• ZR04ZN and ZR04ZM_V1.6.1 Upgrade File_rootfs-hi3520d
• ZR04FN and ZR04FM_V1.4.4 Upgrade File_rootfs-3520dv300
• ZR04FN and ZR04FM_V1.6.1 Upgrade File_rootfs-3520dv300
• ZR04JS_V1.2.1 Upgrade File_rootfs-3521a (2827)
• ZR04JS_V1.4.5 Upgrade File_rootfs-3531a (2827)
• ZR04JS_V1.5.3 Upgrade File_rootfs-3521dv100 (2829)
• ZR04LN and ZR04LM_V1.2.1 Upgrade File_rootfs-3520dv300
• ZR08ZN and ZR08ZM_V1.4.5 Upgrade File_rootfs-3520dv300
• ZR08ZN and ZR08ZM_V1.6.1 Upgrade File_Hi3520DV300+2×TP2828
• ZR08BN and ZR08BM_V1.6.1 Upgrade File_rootfs-3520dv400 (HW Version: V01.1P2G.02.T)
• ZR08CN and ZR08CM_V1.6.1 Upgrade File_rootfs-3521dv100
• ZR08CN and ZR08CM_V1.6.3 Upgrade File_rootfs-3521dv100
• ZR08TN_V1.6.1 Upgrade File_rootfs-3531dv100
• ZR08KS_V1.3.1 Upgrade File_rootfs-3531a
• ZR08KS_V1.4.5 Upgrade File_rootfs-3531a (2827)
• ZR08KS_V1.6.1 Upgrade File_rootfs-3531dv100
• ZR08FN and ZR08FM_V1.4.5 Upgrade File_rootfs-3521a
• ZR08FN and ZR08FM_V1.6.1 Upgrade File_rootfs-3521a
• ZR08LN and ZR08LM_V1.2.1 Upgrade File_rootfs-3521a
• ZR08LN and ZR08LM_V1.3.1 Upgrade File_rootfs-3521a
• ZR16BK_V1.6.1 Upgrade File_rootfs-3521dv100
• ZR16BK_V1.6.3 Upgrade File_rootfs-3521dv100
• ZR16CK_V1.6.3 Upgrade File_rootfs-3531dv100
• ZR16CK_V1.6.1 Upgrade File_rootfs-3531dv100
• ZR16ZK_V1.4.5 Upgrade File_rootfs-3521a
• ZR16ZK_V1.6.1 Upgrade File_rootfs-3521a (2828)
• ZR16LK_V1.2.1 Upgrade File_rootfs-3531a
• ZR16JK_V1.4.5 Upgrade File_rootfs-3531a (2826)
• ZR16JK_V1.6.1 Upgrade File_rootfs-3531a
• ZR16QK_V1.2.1 Upgrade File_rootfs-3521a
• ZR08HF_V1.2.0 Upgrade File_rootfs-3521 (2018.3)
• ZR08AN and ZR08AM_V1.2.1 Upgrade File_rootfs-3520dv300 (2018.2.8)
• ZR08QN and ZR08QM_V1.2.1 Upgrade File_rootfs-3521a (TVI, 1080P)
• ZR04BE and ZR04BA_V1.2.0 Upgrade File_rootfs-3520d (2018.1 )
• ZR08EA_V1.2.0 Upgrade File_rootfs-3521
• ZR08DE and ZR08DA_V1.2.0 Upgrade File_rootfs-3520d (2018.1)
• ZR04GF_V1.2.0 Upgrade File_rootfs-hi3520d ( 2018.3)
• ZR08HA_V1.1.6 Upgrade File_rootfs-3521a (2018.3)
• ZR08AN and ZR08AM_V1.2.1 Upgrade File_rootfs-3520dv300 (TVI, 720P)
• ZR08KN and ZR08KM_V1.2.1 Upgrade File_rootfs-3520dv300 (TVI, 720P)
• ZR08EG Upgrade File_rootfs-3521
• ZR08HN and ZR08HM Upgrade File_rootfs-3521a
• ZR08HN and ZR08HM Upgrade File_rootfs-3520dv300
• ZR08HG Upgrade File_rootfs-3521a
• R04BE_V1.1.5 Upgrade File_rootfs-hi3520d
• ZR08DE_V1.1.5 Upgrade File_rootfs-hi3520d
• ZR08EM_V1.1.5 Upgrade File_rootfs-3521 (Wired DVR)
• ZR04PF_V1.1.5 Upgrade File_rootfs-3521
• ZR08QF_V1.1.5 Upgrade File_rootfs-3531
• ZR08DA_V1.1.5 Upgrade File_rootfs-hi3520d
• ZR08HF_V1.1.5 Upgrade File_rootfs-3521a
• ZR04GF_V1.1.5 Upgrade File_rootfs-hi3520d
• ZR04BA_V1.1.5 Upgrade File_rootfs-hi3520d
• ZR04PN_V1.2.1 Upgrade File_rootfs-3520dv300 (TVI, 1080P)
• ZR08HA_V1.1.6 Upgrade File_rootfs-3521a (AHD,720P DVR)
• ZR04GM_V1.1.6 Upgrade File_rootfs-hi3520d (AHD, 720P DVR)
• ZR16LK_V1.2.1 Upgrade File_rootfs-3531a
• ZR16JK_V1.4.5 Upgrade File_rootfs-3531a (2826)
• ZR16JK_V1.6.1 Upgrade File_rootfs-3531a
• ZR16QK_V1.2.1 Upgrade File_rootfs-3521a
• ZR08HF_V1.2.0 Upgrade File_rootfs-3521 (2018.3)
• ZR08AN and ZR08AM_V1.2.1 Upgrade File_rootfs-3520dv300 (2018.2.8)
• ZR08QN and ZR08QM_V1.2.1 Upgrade File_rootfs-3521a (TVI, 1080P)
• ZR04BE and ZR04BA_V1.2.0 Upgrade File_rootfs-3520d (2018.1 )
• ZR08EA_V1.2.0 Upgrade File_rootfs-3521
• ZR08DE and ZR08DA_V1.2.0 Upgrade File_rootfs-3520d (2018.1)
• ZR04GF_V1.2.0 Upgrade File_rootfs-hi3520d ( 2018.3)
• ZR08HA_V1.1.6 Upgrade File_rootfs-3521a (2018.3)
• ZR08AN and ZR08AM_V1.2.1 Upgrade File_rootfs-3520dv300 (TVI, 720P)
• ZR08KN and ZR08KM_V1.2.1 Upgrade File_rootfs-3520dv300 (TVI, 720P)
• ZR08EG Upgrade File_rootfs-3521
• ZR08HN and ZR08HM Upgrade File_rootfs-3521a
• ZR08HN and ZR08HM Upgrade File_rootfs-3520dv300
• ZR08HG Upgrade File_rootfs-3521a
• ZR04BE_V1.1.5 Upgrade File_rootfs-hi3520d
• ZR08DE_V1.1.5 Upgrade File_rootfs-hi3520d
• ZR08EM_V1.1.5 Upgrade File_rootfs-3521 (Wired DVR)
• ZR04PF_V1.1.5 Upgrade File_rootfs-3521
• ZR08QF_V1.1.5 Upgrade File_rootfs-3531
• ZR08DA_V1.1.5 Upgrade File_rootfs-hi3520d
• ZR08HF_V1.1.5 Upgrade File_rootfs-3521a
• ZR04GF_V1.1.5 Upgrade File_rootfs-hi3520d
• ZR04BA_V1.1.5 Upgrade File_rootfs-hi3520d
• ZR04PN_V1.2.1 Upgrade File_rootfs-3520dv300 (TVI, 1080P)
• ZR08HA_V1.1.6 Upgrade File_rootfs-3521a (AHD,720P DVR)
• ZR04GM_V1.1.6 Upgrade File_rootfs-hi3520d (AHD, 720P DVR)

DVR Software

• Zosi Smart APP for Android
• Win Client_AVSS
• Mac Client_AVSS
• Win Client_IVSS
• PC Client _ ZOSI VIEW
• Mac Client _ ZOSI VIEW
• ZOSI VIEW APP for Android Phone

NVR Upgrade Files

• ZG3012M Battery Wireless Camera_V1.00.005Z_6a0X Upgrade File ALL_FW_SN93700.bin
• ZR04DR Battery Wireless NVR_V1.6.4 Upgrade File rootfs-3536dv100 (ZSWNVK-R4204A)
• ZR08DP Wireless NVR_V1.6.2 Upgrade File_rootfs-3536dv100 (ZSWNVK-H820XX)
• ZR08DP Wireless NVR_V1.6.4 Upgrade File_rootfs-3536dv100 (ZSWNVK-J820XX)
• ZR04DS Wireless NVR Upgrade File_rootfs-hi3520d
• GATEWAY_HI18Ev2_20190321_GATEWAY_N18EV2R_2_3_48_718010
• Upgrade file for NVR_K9504-W
• Upgrade file for NVR_K9508-W
• Upgrade file for NVR_K9608-W
• Upgrade file for NVR_K8204-W
• Upgrade file for NVR_K8208-W

NVR Software

• Windows Client_ZOSI Cloud
• Mac Client_ZOSI Cloud
• Search Tool for NVR system.

POE Upgrade Files

• ZR04EN and ZR04EM POE NVR_V1.6.2 Upgrade File_rootfs-3536dv100
• ZR08EN and ZR08EM POE NVR_V1.6.2 Upgrade File_rootfs-3536dv100
• Upgrade files for ZR08EN and ZR08EM_V1.6.3 POE NVR + 2MP ZG2612E_V1.3.3 POE Cameras
• Upgrade files for ZR08EN and ZR08EM_V1.6.3 POE NVR + 5MP ZG2615D_V1.6.8 POE Cameras
• ZR04RN and ZR04RM POE NVR_V1.2.1 Upgrade File_rootfs-hi3520d
• ZR04RN and ZR04RM POE NVR_V1.4.5 Upgrade File_rootfs-hi3520d
• ZR08RN and ZR08RM POE NVR_V1.2.1 Upgrade File_rootfs-3520dv300 (20181018)
• ZR08RN and ZR08RM POE NVR_V1.4.5 Upgrade File_rootfs-3520dv300 (20190715)
• Search Tool for POE system.

Camera Upgrade Files

• IPC Upgrade file_V2.6.0_391806
• IPC Upgrade file N18EV2W_2_3_1_578010
• IPC Upgrade file N18EV2W_1_8_24_578010B
• IPC Upgrade file WS18E_1_7_8_573013 version
• IPC Upgrade File N16DW_1_8_27_564221 Version
• IPC Upgrade file N18EV200_1_8_19_578011 version
• IPC Upgrade file N18E_1_6_1_573011 version

Camera Software

• IP Search
• SearchTool
• Q2/I2パソコン専用アプリ
• Ipcamsuite V1.2.26.8

<p>The post Zosi DVR/NVR Firmware Software Tools DL first appeared on NVR IPCAMERA SECURITY.</p>