This article is for the Arlo Secure experience with Library. If you have the Arlo Secure experience with Feed, visit: How to set up Arlo Cameras – Arlo Secure 4.0

This article applies to Arlo Ultra, Arlo Ultra 2, Arlo Pro 3, Arlo Pro 4, and Arlo Essential Wire-Free series cameras. To connect and install other Arlo devices, visit the links under: Set up other Arlo devices

For the best results use the Arlo Secure App for Arlo camera setup.

An Arlo SmartHub or Base Station is required for Arlo Pro 3, Arlo Ultra, and Arlo Ultra 2 cameras. To check compatibility, visit: Arlo SmartHub and Base Station Compatibility

An Arlo SmartHub or Base Station is optional for Arlo Pro 4 and Arlo Essential wire-free series cameras. For more information, visit: What are the benefits of using an Arlo SmartHub or Base Station?

To set up your camera using a SmartHub or Base Station:

Note: Arlo Ultra, Ultra 2, and Pro 3 must be installed using an Arlo SmartHub or Base Station.

Note: If an Arlo SmartHub or Base Station is not installed, tap Add New SmartHub.

Plug the Ethernet Cable into your SmartHub or Base Station and tap Continue.

Plug the AC adapter into the wall outlet, make sure the lights on the Arlo SmartHub or Base Station turn on, and tap Continue.

If you have trouble connecting the Arlo SmartHub or Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?

Note: Make sure the camera is within 3 to 6 feet of your Arlo SmartHub or Base Station during the setup process. Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.
If the search is taking too long, tap Manually Pair Device. Press the Sync button on the camera and tap Continue.

To set up Arlo Pro 4 or Arlo Essential wire-free cameras directly to your Wi-Fi:

How to set up Arlo Cameras – Arlo Secure 4.0

This article applies to:

VMC5040  VMC4040P  VMC4041P  VMC4050P  VMC4060P  VMC2020  VMC2030  VMC2032

This article is for the Arlo Secure App experience with Feed. If you have the Arlo Secure App experience with Library, visit: How to set up Arlo Cameras

This article applies to Arlo Ultra, Arlo Ultra 2, Arlo Pro 3, Arlo Pro 4, Arlo Pro 5S, and Arlo Essential Wire-Free series cameras. To connect and install other Arlo devices, visit the links under: Set up other Arlo devices

Need Help?

If you need help installing your new Arlo device, you can reach Arlo Support via the Need Help? button in the Arlo Secure App or on my.arlo.com.

Notes:

An Arlo SmartHub or Base Station is required for Arlo Pro 3, Arlo Ultra, and Arlo Ultra 2 cameras.

An Arlo SmartHub or Base Station is optional for Arlo Pro 4, Pro 5S, and Arlo Essential Wire-Free series cameras.

Arlo SecureLink is a technology that uses the sub-GHz wireless communication to communicate between Arlo devices. The Arlo Security Keypad Sensor Hub uses Arlo SecureLink to talk with devices such as the Arlo All-in-One Sensor and the Arlo Pro 5S Camera.

To set up an Arlo camera with an Arlo SmartHub or Base Station:

Note: Arlo Ultra, Arlo Ultra 2, and Arlo Pro 3 must use an Arlo SmartHub or Base Station.

1.Launch the Arlo Secure App.

2.Tap Devices.
Note: Make sure the correct Location where you want to add the camera is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap .

4.Tap Cameras.

5.Tap Ultra, Pro, or Essential.

6.Select your camera.

7.Select an Arlo SmartHub or Arlo Base Station.
Note: If an Arlo SmartHub or Base Station is not installed, tap Add New SmartHub.
Plug the Ethernet Cable into your Arlo SmartHub or Base Station and tap Continue.
Plug the AC adapter into the wall outlet, make sure the LEDs on the Arlo SmartHub or Base Station turn on, and tap Continue.
If you have trouble connecting the SmartHub or Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?

8.Insert the battery into the camera, and tap Continue.
Arlo will begin looking for your camera.
Make sure the camera is within 3 to 6 feet of your Arlo SmartHub or Base Station during the setup process.
Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.
If the search is taking too long, tap Manually Pair Device.
Press the Sync button on the camera and tap Continue.

9.Name your Arlo camera and tap Continue.

10.Position your Arlo camera and tap Continue.

11.Tap Finish.
Note: Your camera will be added to Arm Away mode after installation where Motion Detection, Recording, Variable Length recording is enabled. For more information, visit About Arlo Routines, Modes, Rules, and Automations

To set up Arlo Pro 4, Arlo Pro 5S, or Arlo Essential wire-free camera directly to your Wi-Fi router:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap .

4.Tap Pro or Essential.

5.Select your camera.

6.Select Connect without SmartHub and tap Continue.

7.Check your mobile device settings to ensure you are connected to a 2.4 GHz network.
Note: Arlo Pro 5S cameras work with 2.4 GHz and 5 GHz frequency bands after installation is complete on 2.4 GHz. For more information, visit: How does the Arlo Pro 5S Camera use 5GHz Wi-Fi networks?

8.Return to the Arlo Secure App and tap Continue.

9.Enter your Wi-Fi SSID (Network Name) and Password.

10.Tap Continue.

11.For Arlo Essential wire-free cameras:
Press and hold the Sync button on the bottom of the camera for two seconds.

12.For Arlo Pro 4 and Arlo Pro 5S:
Insert the battery into the camera and tap Continue.
When the LED on the front of the camera is blinking blue, tap Continue.
If the LED is not blinking blue, tap LED is not blinking blue.
Press and hold the Sync button on the inside of the camera and tap Continue.
When the LED begins blinking blue, tap Continue.

13.Hold the QR code about four to six inches in front of your Arlo camera.

14.When you hear a chime, tap Continue.
Note: If you are having trouble, visit: My Arlo camera will not scan the QR code during setup

15.Arlo will begin looking for your camera.
Make sure the camera is within 3 to 6 feet of your Wi-Fi router during the setup process.
Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.

16.Name your Arlo camera and tap Continue.

17.Position your Arlo camera and tap Continue.

18.Tap Finish.
Note: Your camera will be added to Arm Away mode after installation where Motion Detection, Recording, Variable Length recording is enabled. For more information, visit About Arlo Routines, Modes, Rules, and Automations

To set up other Arlo devices, visit:

For more information, visit:

To troubleshoot setup issues, visit:

How to set up the Arlo Pro and Pro 2 Camera – Arlo Secure 4.0

This article applies to:

VMC4030P  VMC4030

This article is for the Arlo Secure App with Feed. If you have the Arlo Secure App with Library, visit: How to set up the Arlo Pro and Pro 2 Camera

The following instructions apply to setting up the Arlo Pro or Arlo Pro 2 camera. To setup other Arlo camera models, visit: How to set up Arlo Cameras – Arlo Secure 4.0

To complete the Arlo Pro or Arlo Pro 2 setup process, you will need an Arlo SmartHub or Base Station. Install the Arlo SmartHub or Base Station first before installing your cameras. For more information, visit: How do I connect my Arlo SmartHub or Base Station to the Internet? – Arlo Secure 4.0

If you are setting up multiple cameras, only sync one camera at a time.

To set up an Arlo Pro or Pro 2 Camera:

1.Launch the Arlo Secure App.

2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap .

4.Tap Cameras.

5.Tap Pro.

6.Tap Pro 2 or Pro.

7.Select an Arlo SmartHub or Arlo Base Station. If only one Arlo SmartHub or Base Station is installed, tap Continue when Arlo has detected the device.
Note: If an Arlo SmartHub or Base Station is not installed, tap Add New SmartHub.
Plug the Ethernet Cable into your Arlo SmartHub or Base Station and tap Continue.
Plug the AC adapter into the wall outlet, make sure the LEDs on the Arlo SmartHub or Base Station illuminate, and tap Continue.
If you have trouble connecting the Arlo SmartHub or Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?

8.Insert the battery into the camera, and tap Continue.
Unlock the battery compartment by pressing the latch button and pulling back gently.
Insert the battery as shown and close the battery door.

9.Press the Sync button on the camera for about two seconds and then release the button.

10.When the LED on the camera is blinking Blue, tap Continue.

11.Arlo will begin looking for your camera.
Note: Make sure the camera is within 3 to 6 feet of your Arlo SmartHub or Base Station during the setup process. Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.
If the search is taking too long, tap Manually Pair Device. Press the Sync button on the camera and tap Continue.

12.Name your Arlo camera and tap Continue.

13.Position your Arlo camera and tap Continue.

14.Tap Finish.
Note: Your camera will be added to the  Arm Away mode after installation. Motion Detection, Recording, Variable Length recording are enabled. For more information, visit: About Arlo Routines, Modes, Rules, and Automations

How to set up the Arlo Wire-Free Camera – Arlo Secure 4.0

This article applies to:

VMC3030

This article is for the Arlo Secure App with Feed. If you have the Arlo Secure App with Library, visit: How to set up the Arlo Wire-Free Camera

The following instructions apply to setting up the original Arlo Wire-Free Camera (VMC3030). To setup other Arlo camera models, visit: How to set up Arlo Cameras – Arlo Secure 4.0

To set up the Arlo Wire-Free Camera:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap .

4.Tap Cameras.

5.Tap Others.

6.Tap Arlo.

7.Select an Arlo SmartHub or Arlo Base Station or tap Continue if only one Arlo SmartHub or Arlo Base Station is installed.
Note: If an Arlo SmartHub or Arlo Base Station is not installed, tap Add New Base Station.
Plug the Ethernet Cable into your Arlo SmartHub or Arlo Base Station and tap Continue.
Plug the AC adapter into the wall outlet, make sure the LEDs on the Arlo SmartHub or Arlo Base Station illuminate, and tap Continue.
If you have trouble connecting the Arlo SmartHub or Arlo Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?

8.Insert the batteries into the camera:

Unlock the battery compartment by sliding and holding the latch.

Insert the batteries as shown and close the battery door.

How to set up the Arlo Essential Indoor Camera – Arlo Secure 4.0

This article applies to:

VMC2040

This article is for the Arlo Secure App with Feed. If you have the Arlo Secure App with Library, visit: How to set up the Arlo Essential Indoor Camera

For best results, use the Arlo Secure App for Arlo Essential Indoor Camera setup.

An Arlo SmartHub or Base Station is optional.

Need Help?

If you need help installing your new Arlo device, you can reach Arlo Support via the Need Help? button in the Arlo Secure App or on my.arlo.com.

To set up the Arlo Essential Indoor Camera directly to your Wi-Fi router:

1.Launch the Arlo Secure App.

2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap .

4.Tap Cameras.

5.Tap Essential.

6.Tap Essential Indoor Camera.

7.Review the Meet your Arlo Essential Indoor Camera screen and tap Continue.

8.Find a location to place the camera that is near an outlet and within range of your Wi-Fi network.

9.Tap Continue.

10.Select Connect without SmartHub and tap Continue.

11.Check your mobile device settings to ensure you are connected to a 2.4 GHz network.

12.Return to the Arlo Secure App and tap Continue.

13.Enter your Wi-Fi SSID (network name) and Password.

14.Tap Continue.

15.Use the provided cable and power adapter to connect to an outlet, then plug the micro-USB portion of the cable into your camera.

16.Once the Privacy Shield on the camera opens, tap Continue.

17.Press the Sync button on the camera.

18.When the LED on the front of the camera is flashing blue, tap Continue.

19.Hold the QR code about four to six inches in front of your Arlo camera.
When you hear a chime, tap Continue.
If you are having trouble, visit: My Arlo camera will not scan the QR code during setup

20.Arlo will begin looking for your camera.
After the camera is found, name your Arlo camera and tap Continue.

21.Position your Arlo camera and tap Continue.

To set up the Arlo Essential Indoor Camera with an Arlo SmartHub or Base Station:

1.Launch the Arlo Secure App.

2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap .

4.Tap Cameras.

5.Tap Essential.

6.Tap Essential Indoor Camera.

7.Review the Meet your Arlo Essential Indoor Camera screen and tap Continue.

8.Find a location to place the camera that is near an outlet and within range of your Wi-Fi network.

9.Tap Continue.

10.Tap Continue to add your device to the Arlo SmartHub or Base Station.

11.Use the provided cable and power adapter to connect to an outlet, then plug the micro-USB portion of the cable into your camera.

12.Once the Privacy Shield on the camera opens, tap Continue.

13.Press the Sync button on the camera.

14.When the LED on the front of the camera is flashing blue, tap Continue.

15.Follow the in-app instructions to complete the setup.

How do I set up my Arlo Go 2 Camera? – Arlo Secure 4.0

This article applies to:

VML2030

This article is for the  Arlo Secure App experience with Feed. If you have the Arlo Secure App experience with Library, visit: How do I set up my Arlo Go 2 Camera?

Arlo Go 2 gives you the flexibility of using 2.4 GHz Wi-Fi or LTE for connectivity. You can also use LTE as a backup in case your Wi-Fi internet connection is interrupted.

Note: When using both 2.4 GHz Wi-Fi and LTE mode, Wi-Fi will always be the primary mode of connection.

Arlo Go 2 works with the same Arlo Secure App as all other Arlo cameras and devices. However, to connect your Go 2 camera to the mobile network, an activated SIM card with a mobile data plan must be inserted into the camera.

Note: We recommend that you charge the battery before mounting your camera. Your camera LED indicator light will blink amber if your battery needs charging. The indoor charging cable that came with your camera works with most power adapters.

Need Help?

If you need help installing your new Arlo device, you can reach Arlo Support via the Need Help? button in the Arlo Secure App or on my.arlo.com.

To set up your Arlo Go 2 camera using LTE only:

1.Launch the Arlo Secure App.

2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap .

4.Tap Cameras.

5.Tap Go 2.

6.Tap Continue.

7.Follow the instructions for installing your SIM card as shown on the Arlo Secure App and tap Continue.
For more information, visit: How do I install a SIM card in my Arlo Go 2 Camera?
The LED in front of your camera should blink blue. If the LED is not blinking blue, press the Sync button on the inside of your camera.

8.Tap Continue.

9.Hold the QR code in the Arlo Secure App, 4 to 6 inches in front of your camera.
You should hear a chime from your Arlo device. If you didn’t hear a chime, visit: My Arlo camera will not scan the QR code during setup

10.Tap Continue.

11.Name your Arlo camera and tap Continue.

12.Position your Arlo camera and tap Continue.

13.Tap Finish.

To set up your Arlo Go 2 camera with Wi-Fi:

Note: Before setting up your Arlo Go 2, make sure that your mobile device is connected to a Wi-Fi network. For more information, visit: How do I connect my mobile device to a 2.4 GHz Wi-Fi network to set up my Arlo camera?

1.Launch the Arlo Secure App.

2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap .

4.Tap Cameras.

5.Tap Go 2.

6.Tap Set Up with Wi-Fi.

7.Follow the instructions for installing your SIM card as shown in the Arlo Secure App and tap Continue.
Note: You may skip this step if you are not using a SIM card.
The LED in front of your camera should blink blue. If the LED is not blinking blue, press the Sync button on the inside of your camera.

8.Tap Continue.

9.Verify your mobile device is connected to a 2.4 GHz Wi-Fi network and tap Continue.

10.Enter your Wi-Fi credentials, then tap Continue.

11.Hold the QR code in the Arlo Secure App, 4 to 6 inches in front of your camera.
You should hear a chime from your Arlo device. If you didn’t hear a chime, visit: My Arlo camera will not scan the QR code during setup

12.Tap Continue.

13.Name your Arlo camera and tap Continue.

14.Position your Arlo camera and tap Continue.

15.Tap Finish.

If the Arlo Go 2 camera is installed too far from your Wi-Fi router, it may cause the battery to drain quicker. For more information, visit: How do I control whether my Go 2 Camera connects to Mobile or Wi-Fi?

<p>The post How to set up Arlo Cameras first appeared on NVR IPCAMERA SECURITY.</p>

Before you can connect a Smart Garage Camera to your home network, you will need:

The LED on the Smart Garage Camera must be blinking blue. If the LED is not blinking blue or is flashing blue/green, unplug the power supply and reconnect the power supply.

The myQ app supports the use of more than one myQ Smart Garage Camera. You will have to follow the myQ app set-up steps for each camera you want to add. When setting up more than one camera, it is recommended to pick a distinguishing name for each camera so you can easily find and select the camera you want to view in the app.

How to set up the Smart Garage Camera

Note: During the setup process, monitor the status of the LED on your myQ Smart Garage Camera for any changes. If you are still unable to connect, use the last LED status observed during the in-app setup to troubleshoot further and see Unable to Connect the myQ Smart Garage Camera to Wi-Fi Overview.

myQ Camera Frequently Asked Questions

The following FAQs answer many of the general questions about myQ Cameras. The FAQs also include links to articles where you may find more information.

How do I connect my camera to my home Wi-Fi network?

How do I enable Motion Recording in the myQ app?

Motion Events will only be recorded when Motion Recording is enabled in the Camera Settings of the myQ app.

See Enable Motion Recording in the myQ App for more help.

How do I Live Stream in the myQ app?

Live Stream gives you the ability to view your camera feed live.

See How to Live Stream in the myQ App for more information.

How do I adjust the camera volume in the myQ app?

The camera volume in the myQ app is controlled by the built-in volume controls on your mobile device.

See How to Adjust the Camera Volume in the myQ App for more information.

How do I use the Push to Talk camera feature in the myQ app?

Push To Talk gives you the ability to listen and speak through the camera.

See How to Use the Push To Talk Camera Feature in the myQ App to get help with setting up this feature.

Can I use more than one type of myQ Smart Camera?

The myQ app supports the use of more than one myQ Smart Camera. You will need to follow the myQ app set-up steps for each camera you want to add. When setting up more than one camera, it is recommended to pick a distinguishing name for each camera so you can easily find and select the camera you want to view in the app. We would recommend signing up for the 30 day multi-device plan if connecting multiple cameras.

How high should I mount my camera?

Smart Garage Camera/Indoor Camera – Within 10’ of an existing outlet (comes with 10’ power cord)

Smart Outdoor Camera – 7-10’ recommended height (comes with 25’ power cord)

Is my camera able to withstand extreme temperatures?

Smart Indoor Camera – Rated for indoor use

Smart Garage Camera – Rated for extreme garage temperatures from -4° to 122° F (-20°C to 50°)

Smart Outdoor Camera – Rated for temperatures ranging from -4° to 122° F (-20°C to 50°)

Video Keypad – Rated for temperatures ranging from -4° to 122° F (-20°C to 50°)

Is my camera weatherproof?

Smart Indoor Camera – Rated for indoor use and not designed to withstand weather elements.

Smart Garage Camera – Rated for extreme garage temperatures from -4° to 122° F (-20°C to 50°) but not designed to withstand weather elements.

Smart Outdoor Camera – Rated for temperatures ranging from -4° to 122° F (-20°C to 50°). Power cable and adapter fitted with extra gasket seals to prevent water damage. IP 65 rated Water Resistant.

Video Keypad – Rated for temperatures ranging from -4° to 122° F (-20°C to 50°) and is IP 55 rated Water Resistant.

How do I reset my camera?

See How to reset a myQ device for more help.

I see an error and was unable to name my camera. Do I need to start over?

Before starting over, check the LED status on the Camera. If solid green, force close the myQ app and relaunch to confirm if the device is showing. You can update the name by tapping the gear icon in the video window.

If the light is not solid green, start over or see How to reset a myQ device for more help.

How can I adjust the camera position?

Smart Indoor Camera – Adjust camera head swivel.

Smart Garage Camera – Adjust camera head swivel. Older SGC1 models will also have a swivel camera arm.

Smart Outdoor Camera – Loosen collar at base and adjust camera arm. Adjust camera head swivel.

Video Keypad –

My Outdoor Camera is not recognizing movement. How can I fix that?

Ensure the camera is mounted at the appropriate height of 7’-10’. Installation higher than the recommended height may not allow for proper movement and person detection. Adjust the angle of your camera so the lens is not receiving direct sunlight or other light sources.

Recommended Router Settings for myQ Cameras

When setting up a LiftMaster camera, there may be a few Wi-Fi settings that need to be changed in order to successfully connect the device. Some settings may need to be given to your internet service provider (ISP) to have them configured for your site or home see When to Contact Your Internet Service Provider (ISP)

Recommended Router Settings

Note: If attempting to change any router settings yourself, be sure to back up your router’s current settings before any changes are made and have the router’s manual available.

myQ cameras require these ports in order to communicate to our server

Verify that ports are not being blocked by your router or a firewall product

Note: User-modified routers using open-source firmware (such as DD-WRT, OpenWRT, etc.) have not been tested with myQ products. While some of these open-source versions may work with myQ products, compatibility is unknown.

Unable to Connect the myQ Smart Garage Camera to Wi-Fi Overview

myQ Smart Garage Cameras require a Wi-fi internet connection to access the myQ server. If the myQ Smart Garage Camera is not connecting to the server, the issue could be due to the router, mobile device connection, or Internet connection.

When attempting to connect, the camera’s LED indicator lights will go through a sequence of flashes before finally turning solid green to confirm the connection. Each step of the sequence indicates what the camera is attempting to do and how you approach troubleshooting depends on the LED light’s behavior and color.

Before You Begin

Make sure to check the status of the LED on the myQ Smart Garage Camera and use the list below to determine a resolution.

Note: Chamberlain Group Technical Support does not troubleshoot routers. If additional assistance is needed to access a home router, please contact your internet service provider.

LED Light	Connection Status	Troubleshooting Resource(s)
No LED	The camera does not have power	Unable to Connect the myQ Smart Garage Camera to My Home Wi-Fi Network and No LED
Solid White	Camera is powering up	Unable to Connect the myQ Smart Garage Camera to My Home Wi-Fi Network and LED Is Solid White
Flashing Blue	Unable to connect to your home Wi-Fi network	Unable to Connect the myQ Smart Garage Camera to My Home Wi-Fi Network and LED Is Flashing Blue
Solid Blue	Unable to connect to your mobile device	Unable to Connect the myQ Smart Garage Camera to My Home Wi-Fi Network and LED Is Solid Blue
Flashing Blue and Green	Unable to connect to your home Wi-Fi router	Unable to Connect the myQ Smart Garage Camera to My Home Wi-Fi Network and LED Is Flashing Blue and Green
Flashing Green	Unable to connect to myQ internet server	Unable to Connect the myQ Smart Garage Camera to My Home Wi-Fi Network and LED Is Flashing Green
Solid Green	Connected to myQ server, but device not added to myQ account	Unable to Connect the myQ Smart Garage Camera to My Home Wi-Fi Network and LED is Solid Green
Flashing Purple	Camera is updating firmware	Unable to Connect the myQ Smart Garage Camera to my Home Wi-Fi Network and LED is Flashing Purple
Flashing Red	Camera is overheating, going into protection mode	Unable to Connect the myQ Smart Garage Camera to my Home Wi-Fi Network and LED is Flashing Red

How to forget a myQ Camera in Bluetooth Settings

When you experience an issue with your Smart Garage Camera or garage door opener’s integrated camera being connected via Bluetooth, but the camera is not connecting to Wi-Fi, these steps will walk you through “forgetting” the myQ Camera in Bluetooth on your phone.

How to forget a myQ Camera in Bluetooth Settings

Apple:

1.On your phone, tap Settings

2.Tap Bluetooth

3.Find the Camera in the list

• Smart Garage Cameras will start with SGC

• Integrated Cameras start with GDO

• 

1.Tap the blue “i” icon () to the right of the Camera

2.Select Forget this Device

Android:

1.On your phone, tap Settings

2.Tap Connections

3.Tap Bluetooth

4.Find the Camera in the list

• Smart Garage Cameras will start with SGC

• Integrated Cameras start with GDO

• 

<p>The post myQ Smart Garage Camera Setup Guide first appeared on NVR IPCAMERA SECURITY.</p>

Lorex Fusion: Download the Lorex App

The following article provides instructions for downloading the Lorex App and connecting your Lorex Fusion Collection recorder to the app.

Prerequisite

Before you start, your Fusion recorder must be powered on and connected to your router using the included Ethernet cable. For Basic System Setup instructions, refer to your Fusion recorder’s Quick Start Guide or Manual on the product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

.

Download the Lorex App

Once your Fusion recorder has connected to the Lorex App, complete the final Fusion steps by connecting your Fusion Wi-Fi cameras and accessories.

For setup instructions using the new local UI, please see the article Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (New Local UI).

For setup instructions using the previous local UI, please see the article Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories.

Lorex Fusion: Frequently Asked Questions

The following frequently asked questions (FAQs) provide more information about your Lorex Fusion Collection. Where applicable, the FAQ includes links to articles where you may find more information.

Lorex Fusion Troubleshooting FAQ.

What is Lorex Fusion?

Our Lorex Fusion recorders incorporate the newest (fusion) technology to connect both Lorex Wired and Fusion Wi-Fi Cameras, Doorbells, Floodlights, and Sensors to one system. Lorex Fusion Wi-Fi Cameras and Accessories can connect to one recorder for continuous 24/7 recording and local, secure storage (up to 10TB). Everything can be accessed from your Lorex App for easy control of all devices.

.

Why do I get an offline message and a blank screen for the (B463AJ) 2K battery doorbell’s channel on the Fusion recorder?

Being a battery-operated doorbell, it will always go to sleep after a period of inactivity to conserve battery life. Once the doorbell is correctly paired to your Fusion recorder, the offline message means the doorbell has gone to sleep but is still connected and can be awakened. When motion is detected, or when the call button is pressed, there will be live video from that channel. You can also manually wake up the doorbell through the Lorex app, by activating the liveview.

.

Can my Battery Video Doorbell record continuously?

To conserve battery life, Wi-Fi Battery Video Doorbells only record when motion is detected. They do not record continuously.

.

Which recorders are part of Fusion?

For a list of Lorex Fusion Recorders, please refer to the Product Compatibility Chart.

.

Can I connect all Lorex Wi-Fi Cameras and Accessories to my Fusion recorder?

Only Lorex Fusion Compatible Wi-Fi Cameras and Accessories can connect to Lorex Fusion Recorders.

.

Which Lorex Wi-Fi Cameras and Accessories are part of Fusion?

See the following list of Lorex Fusion Wi-Fi devices:

.

Should I update my Lorex Fusion recorder’s firmware?

It is recommended to update your system firmware to the latest version to ensure remote connectivity and to support newly added Fusion Wi-Fi devices.

.

Does my Lorex Fusion recorder require a network setup?

Yes, a network setup is required to connect Fusion Wi-Fi cameras and accessories to your Fusion recorder. Ensure you connect the included Ethernet cable to your recorder’s LAN port and your router.

.

Does it matter which router I use?

Yes, due to its strong signal, the dual-band router is suitable for high resolution video recording and for connectivity between devices. Ensure that your Fusion Wi-Fi cameras and accessories and your Fusion recorder are all connected to a dual-band router (2.4 GHz/5 GHz bands).

.

How many Lorex Fusion Wi-Fi Cameras and Accessories can I connect to my Fusion recorder?

This depends on your Fusion recorder and the number of Fusion Wi-Fi channels it comes with. For full technical specifications, refer to the Product Specifications on your recorder’s product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

.

What is a Fusion Wi-Fi channel?

A Fusion Wi-Fi channel is the channel you use to add a single Fusion Wi-Fi camera to your system. A 16-channel security system with 8 PoE ports/channels (for wired camera connection) and 8 Fusion Wi-Fi channels means that 8 Fusion Wi-Fi cameras and accessories can connect to the entire system.

Note: Fusion Wi-Fi channel’s are only available on certain Lorex Fusion recorders. For a list of Fusion recorders, see the Product Compatibility Chart.

.

How many Fusion Wi-Fi channels are on my Lorex Fusion Recorder?

The number of Fusion Wi-Fi channels varies per Fusion recorder. For full technical specifications, refer to the Product Specifications on your recorder’s product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

.

How do I setup my Lorex Fusion system?

Complete your Fusion setup in the following order:

After connecting your Fusion system, ensure you adjust your Fusion settings.

.

Are there Fusion setup tutorial videos?

For a video walk-through of the Fusion setup with the new local UI (N845, N846, N847, N864, D863, D881 Series), please watch here.

For a video walk-through of the Fusion setup with the previous local UI (N841, N842, N843, N844, N861, D862, D871 Series), please watch here.

.

How do I setup my Lorex Fusion recorder and wired cameras?

For Basic System Setup instructions, refer to your recorder’s Quick Start Guide or Series Manual on the product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

.

How do I connect my Lorex Fusion Wi-Fi camera or accessory to my Fusion recorder?

For full setup instructions, please click on the article corresponding with your model number.

.

Which password should I enter to connect my Lorex Fusion Wi-Fi camera or accessory to my Fusion recorder?

Enter the same password that you created in the Lorex App when setting up your Fusion Wi-Fi device.

.

What is continuous recording?

Once your Lorex Fusion Wi-Fi camera connects to your Fusion recorder, your camera’s recording settings are automatically set to continuous. This means that your Fusion Wi-Fi camera will record 24/7 or for the entire duration of the recording schedule onto your Fusion recorder’s hard drive. It is worth noting that recordings on the camera are limited due to the size of its onboard storage, while recordings on the recorder are extensive (3TB to 10TB). Continuous recording captures everything in the background, and you can playback to catch anything you missed.

.

Do all Lorex Fusion Wi-Fi cameras record continuously?

No, to conserve battery life, battery-operated video doorbells do not record continuously (24/7).

.

How do I set my Lorex Fusion Wi-Fi camera to continuous recording?

After Fusion setup, your Wi-Fi camera is automatically set to Continuous recording. To adjust your camera’s recording settings, login to your recorder and navigate to the devices menu. For instructions, please see the article Lorex Fusion: Adjust Settings.

Note: Battery-operated video doorbells do not record continuously (24/7). Being a battery-operated doorbell, it will always go to sleep after a period of inactivity to conserve battery life. Once the doorbell is correctly paired to your Fusion recorder, the offline message means the doorbell has gone to sleep but is still connected and can be awakened. When motion is detected, or when the call button is pressed, there will be live video from that channel. You can also manually wake up the doorbell through the Lorex app, by activating the liveview.

.

How come I’m receiving duplicate notifications in the Lorex App?

After completing the Fusion setup, your Wi-Fi camera or accessory is connected to the Lorex App twice – once as a single device and then a second time as a device connected to your recorder. To avoid receiving duplicate notifications from the same camera or accessory, you will need to Turn off Alerts for your Wi-Fi device connected to your recorder. For instructions, please see the article Lorex Fusion: Adjust Settings.

.

After Fusion setup, where is my Lorex Fusion Wi-Fi camera’s video footage being stored?

Your Lorex Fusion Wi-Fi camera saves recorded motion detection videos onto the local microSD card (not always included). Once you’ve connected your Fusion Wi-Fi camera to your Fusion recorder, your camera’s recording settings is automatically set to 24/7 Continuous recording, and all recorded video is stored on your recorder’s extensive hard drive (up to 10TB).

.

What features are supported in my Fusion recorder vs. the Lorex App?

Please see the following list of features supported in either your Fusion recorder and/or the Lorex App:

.

Can I use my web browser to access my Lorex Fusion Wi-Fi camera?

You can only access your camera on the Lorex App, recorder, or on the Lorex Cloud Client.

.

When modifying the password in the Lorex Cloud Client, which password should I enter?

Enter the password for your Wi-Fi camera or accessory created in the Lorex App during setup.

.

Where can I order the Lorex Fusion Collection?

To order, go to lorex.com.

Lorex Fusion: Troubleshooting

The following article provides some troubleshooting tips for setting up your Lorex Fusion Collection.

.

My Fusion Wi-Fi camera or accessory is not appearing in the device list.

.

My Fusion Wi-Fi camera or accessory is not connecting to my Fusion recorder.

• Give your Fusion Wi-Fi camera or accessory a few minutes to establish a connection.

• Check to see if your Fusion recorder has the most up-to-date firmware. New Local UI: Login to your recorder and navigate to System > Update & Reset > Upgrade, then click Check for Updates.  Previous Local UI: Login to your recorder and navigate to Main Menu > Information > Update/Reset > Update, then click Check for Updates. For instructions on updating your recorder’s firmware through USB, see the article How to manually upgrade the firmware of your recorder.

• Ensure that your Fusion Wi-Fi cameras and accessories and your Fusion recorder are powered on.

• The same password created for your Fusion Wi-Fi camera or accessory in the Lorex App must be entered in your Fusion recorder. If you have forgotten the password, then reset your Fusion Wi-Fi camera or accessory and connect it to the app again.

• (Applies to the previous local UI only) If your password for your Fusion Wi-Fi camera or accessory is entered incorrectly in your Fusion recorder, then your Wi-Fi device will lock itself. Reset your Fusion Wi-Fi camera or accessory and connect it to the app again.

• Ensure that you are entering the password for your Fusion Wi-Fi camera or accessory created in the Lorex App, and not the Lorex App account password. Those are two separate passwords.

• Ensure that your Fusion Wi-Fi camera or accessory is connected to a dual-band router (2.4 GHz/5 GHz bands).

• Ensure that you are connecting the Fusion Wi-Fi camera or accessory to an available Fusion Wi-Fi channel, and not a Wi-Fi channel that already has a Wi-Fi device connected to it.

.

I don’t know the password for my Fusion Wi-Fi camera or accessory.

If you don’t know the password for your Fusion Wi-Fi camera or accessory, then you will need to reset the device and connect it to the Lorex App again.

To reset your Fusion Wi-Fi camera or accessory:

.

I’m receiving duplicate notifications in the Lorex App.

After completing the Fusion setup, your Wi-Fi camera or accessory is connected to the Lorex App twice – once as a single device and then a second time as a device connected to your recorder. To avoid receiving duplicate notifications from the same camera or accessory, you will need to Turn off Alerts for your Wi-Fi device connected to your recorder. For instructions, please see the article Lorex Fusion: Adjust Settings.

Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (N910 Series)

The following article provides instructions for connecting your Lorex Fusion Collection Wi-Fi Cameras and Accessories to your N910 Fusion recorder.

.

Our Lorex Fusion recorders incorporate the newest (fusion) technology to connect both wired and Wi-Fi cameras, doorbells, floodlights, and motion sensors to one system. All Fusion compatible Wi-Fi cameras and devices connect to one recorder for continuous 24/7 recording and private local storage. Access everything from the Lorex App for easy control of all devices.

Note: To conserve battery life, Wi-Fi Battery Video Doorbells only record when motion is detected. They do not record continuously.

For any connection issues, see the article Lorex Fusion: Troubleshooting.

.

Part One — Wired Setup

Setup your Fusion recorder and wired cameras. For Basic System Setup instructions, refer to your recorder’s Quick Start Guide or Manual on the product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

Important: Network setup is required for your system — use the included Ethernet cable to connect your recorder to your router.

.

Part Two — Connecting your Lorex Fusion Wi-Fi Camera

Connect your Lorex Fusion Wi-Fi Camera to the app and then from your recorder scan your network to add it.

.

Option A — Connecting Your New Lorex Fusion Wi-Fi Camera to Your Recorder

Add compatible Lorex Fusion Wi-Fi Cameras and Accessories onto Fusion Wi-Fi channels on the recorder.

To connect your New Lorex Fusion Wi-Fi Camera to the recorder:

Note:

.

Option B — Connecting Your Existing Lorex Fusion Wi-Fi Camera to Your Recorder

Add compatible Lorex Fusion Wi-Fi cameras and accessories onto Fusion Wi-Fi channels on the recorder.

Note:

To enable remote viewing for the mobile app, you will need to:

To connect your Existing Fusion Wi-Fi camera to the recorder:

1.From the Live View display, click the pair icon  in the center of the Fusion Wi-Fi channel’s screen.

Note: It may take a few minutes for your Lorex Fusion Wi-Fi Camera’s video feed to appear.

To turn off duplicate notifications, adjust your camera’s recording settings, or link motion sensors to cameras, see the article Lorex Fusion: Adjust Settings.

Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (N845, N846, N847, N864, D863, D881 Series)

The following article provides instructions for connecting your Lorex Fusion Collection Wi-Fi cameras and accessories to the Lorex App and to your Fusion recorder.

Note: These Fusion instructions apply to the new local UI only. For Fusion instructions that apply to the previous local UI, please see the article Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories.

.

Before you start

.

Watch the Lorex Fusion setup tutorial video

For a video walk-through of the fusion setup, please watch here.

.

Connect your Fusion Wi-Fi cameras and accessories to the Lorex App

Follow the Lorex App steps to add your Lorex Fusion Wi-Fi cameras and accessories. Refer to your camera’s documentation at help.lorextechnology.com for detailed setup instructions. Search your camera’s model number to access the product support page.

Note:

2.In-app, tap the  icon to add your Wi-Fi camera.

.

Connect your Fusion Wi-Fi cameras and accessories to your Fusion recorder

Note: You can add one Wi-Fi camera or accessory to one Fusion Wi-Fi channel. The number of Fusion Wi-Fi channels varies per Fusion recorder. For full technical specifications, refer to the Product Specifications on your recorder’s product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

2.From the Live View display, click the pair icon  from the center of the Fusion Wi-Fi channel.

Note: If your Lorex Fusion recorder and Fusion Wi-Fi camera share the same password, then the devices will automatically connect without entering the password.

.

After successfully connecting to your Fusion recorder, your Fusion Wi-Fi camera or accessory connection status turns green. For any connection issues, see the article Lorex Fusion: Troubleshooting.

To turn off duplicate notifications, adjust your camera’s recording settings, or link motion sensors to cameras, see the article Lorex Fusion: Adjust Settings.

Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (N841, N842, N843, N844, N861, D862, D871 Series)

The following article provides instructions for connecting your Lorex Fusion Collection Wi-Fi cameras and accessories to the Lorex App and to your Fusion recorder.

Note: These Fusion instructions apply to the previous local UI only. For Fusion instructions that apply to the new local UI, please see the article Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (New Local UI).

.

Before you start

.

Watch the Lorex Fusion setup tutorial video

For a video walk-through of the Fusion setup, please watch here.

.

Connect your Fusion Wi-Fi cameras and accessories to the Lorex App

Follow the Lorex App steps to add your Lorex Fusion Wi-Fi cameras and accessories. Refer to your camera’s documentation at help.lorextechnology.com for detailed setup instructions. Search your camera’s model number to access the product support page.

Note:

2.In-app, tap the  icon to add your Wi-Fi camera.

.

Connect your Fusion Wi-Fi cameras and accessories to your Fusion recorder

Note:

After successfully connecting to your Fusion recorder, your Fusion Wi-Fi camera or accessory connection status turns green. For any connection issues, see the article Lorex Fusion: Troubleshooting.

To turn off duplicate notifications, adjust your camera’s recording settings, or link motion sensors to cameras, see the article Lorex Fusion: Adjust Settings.

Lorex Fusion: Adjust Settings

The following article provides instructions for adjusting your Lorex Fusion Collection settings.

.

Turn off duplicate notifications

After completing the Fusion setup, your Wi-Fi camera or accessory is connected to the Lorex App twice – once as a single device and then a second time as a device connected to your recorder. To avoid receiving duplicate notifications from the same camera or accessory, you will need to Turn off Alerts for your Wi-Fi device connected to your recorder.

To turn off duplicate notifications:

2.Under your Fusion recorder, swipe left to find your Fusion Wi-Fi camera or accessory.

3.Tap on your Fusion Wi-Fi device’s notification icon .

.

.

Adjust the recording settings for your Fusion Wi-Fi camera or accessory

After Fusion setup, your Lorex Fusion Wi-Fi camera’s recording settings will automatically adjust to Continuous, recording 24/7 directly to your recorder’s hard disk drive.

To adjust the recording settings (new local UI):

To adjust the recording settings using the previous local UI, navigate to Main Menu > CAMERA > Recording > Recording and follow the same steps as above.

.

Set the recording schedule for your Fusion Wi-Fi camera or accessory

You can set a custom recording schedule according to your needs. For example, you can set the system to record continuously during business hours and record on motion detection only outside of business hours.

• Click-and-drag on each day to customize the recording schedule. The schedule is set up as a grid, with each block representing two hours.

• Click  beside 2 or more days to link schedules (). This allows you to quickly change multiple schedules at once.

• To make fine adjustments to a schedule, click . This will allow you to set exact start and end times for a schedule.

• To disable all recording of the selected type on the selected day, click .

To set the recording schedule using the previous local UI, navigate to Main Menu > STORAGE > Schedule and follow the same steps as above.

.

Link sensors to cameras

Once you’ve completed the Fusion setup, you can link motion and door/window sensors to any compatible camera, so that when the sensors are triggered the linked automatically cameras record.

.

To learn more about using your Lorex Fusion system, visit the Fusion page or refer to the Lorex Fusion: Frequently Asked Questions article.

.

<p>The post Lorex Fusion Troubleshooting FAQ first appeared on NVR IPCAMERA SECURITY.</p>

ATTENTION: Prior to purchasing and installing an accessory antenna, read the product specifications of your receiver to determine if your receiver has a weatherproof housing. Installing your weatherproof receiver outdoors provides a better line-of-sight between the receiver and the camera, increasing the strength of the wireless signal. See your product specifications to determine the weatherproof rating of your receiver.

The Directional Wireless Panel Antenna and the Omni-Directional Antenna are used to extend the range of one or multiple wireless or wire-free cameras.

Directional Wireless Panel Antenna (ACCANTD9)

Omni-Directional Antenna (ACCANTO8)

Use the 2.4GHz Directional Wireless Panel Antenna (ACCANTD9) to focus a wireless signal onto one specific wireless device (camera or receiver) to increase the range of transmission. A clear line-of-sight between the antenna and the wireless device needing range extension is required.

Use the 2.4GHz Omni-Directional Antenna (ACCANTO8) to enhance the signal of one or multiple cameras that are paired to a single or dual antenna receiver. You may also use two Omni-Directional Antennas to extend the range of all cameras paired to a dual antenna receiver.

REQUIREMENT: To connect the antenna directly to the camera or receiver, the device must have a removable SMA type antenna. Visit www.lorextechnology.com/compatibility to ensure the antenna is compatible with your camera or receiver model.

Lorex Wireless Cameras and Monitors guide 2024

Also Read  : Lorex Camera Troubleshooting

Recommended Antenna Installation Methods

Your antenna needs will vary depending on the setup of your camera system, the number of cameras that require range extension, and the number of channels on your wireless receiver. Review the scenarios below to ensure you have the correct antenna and installation method to meet your needs.

Click a setup scenario to see the recommended installation method:

Combining Accessory Antennas

If you have installed your accessory antenna according to the recommended installation methods and would like to enhance wireless signal strength even further, you may add an additional Directional Wireless Panel Antenna (ACCANTD9) directly to a camera. The additional Directional Wireless Panel Antenna can be used with a Directional Wireless Panel Antenna or with an Omni-Directional Antenna attached to the receiver.

Click an antenna combination to see recommended installation methods:

Scenario 1: Extend the range of one camera paired to a single antenna receiver

To extend the range of one camera connected to a single channel receiver, use the Directional Wireless Panel Antenna (ACCANTD9).

The Directional Wireless Panel Antenna can be connected in two configurations.

Configuration 1. Connect the antenna directly to the camera

Configuration 2. Connect the antenna directly to the wireless receiver

REQUIREMENT: The antenna connects using an SMA cable and replaces the existing antenna on either the camera or wireless receiver. Check www.lorextechnology.com/compatibility to determine if your product is compatible with the antennas.

Scenario 2: Extend the range of one camera paired to a dual antenna receiver

To extend the range of one camera connected to a multi-channel receiver, use the Directional Wireless Panel Antenna (ACCANTD9). Connect the Directional Wireless Panel Antenna directly to the camera.

Scenario 3: Extend the range of select cameras paired to a dual antenna receiver

To extend the range of select cameras on a multi-channel receiver, use the Omni-Directional Antenna (ACCANTO8).

Connect the Omni-Directional Antenna to one of the antenna ports on the wireless receiver.

REMINDER: Each antenna port on a dual antenna receiver is associated with specific camera channels. One antenna communicates with odd numbered channels (1, 3, and 5), while the other antenna communicates with even numbered channels (2, 4, and 6). See the table below for dual antenna channel configurations.

If you connect the Omni-Directional Antenna to an antenna port and your wireless signal does not improve, try switching the Omni-Directional Antenna to the other antenna port or pairing your camera to a different camera channel.

Scenario 4: Extend the range of all cameras paired to a dual antenna receiver

To extend the range of all cameras on a dual antenna receiver, connect an Omni-Directional Antenna (ACCANTO8) to each antenna port on the receiver.

IMPORTANT: Two Omni-Directional Antennas are required to accommodate this setup.

Combination 1: Combine two Directional Wireless Panel Antennas

If you are using a Directional Wireless Panel Antenna (ACCANTD9) to enhance the signal of a single camera with a single channel receiver, you can use an additional Directional Wireless Panel Antenna to further enhance the wireless signal.

Connect one Directional Wireless Panel Antenna directly to the camera and one Directional Wireless Panel Antenna directly to the wireless receiver. To maximize signal strength, it is recommended to aim the two antennas directly at each other with a clear line-of-sight.

Combination 2: Combine a Directional Wireless Panel Antenna with an Omni-Directional Antenna

If you are using an Omni-Directional Antenna (ACCANTO8) to enhance the signal of multiple cameras, you can further enhance the signal of a specific camera by connecting a Directional Wireless Panel Antenna (ACCANTD9) directly to the camera.

A clear line-of-sight between the Directional Wireless Panel Antenna and the Omni-Directional Antenna is recommended to maximize signal strength.

Lorex SD Pro App: Changing / resetting the password

If the password for the Lorex SD Pro app to view the Wireless Home Monitor is lost or forgotten it will need to be reset.

To reset the Lorex SD Pro app password:

1.Ensure that your Wireless Home Monitor is connected to a network router using the included Ethernet cable.

2.On the Wireless Home Monitor tap the Menu icon ().

3.Use the joystick to select Settings > Network > Reset Password.

4.Select Yes to confirm.

5.Tap the Menu icon () repeatedly until all the menus are closed.

6.Launch the SD Pro app and enter the default password. Refer to your user manual for your default password. You will be prompted to create a new password.

Lorex SD Pro App: Setting up Wireless Home Monitor remote access

You can access and view wireless cameras from a Wireless Home Monitor system using an iPhone, iPad, or Android smartphone or tablet using the Lorex SD Pro app. It is available at the App Store or Google Play Store.

Prerequisites:

To set up the mobile application:

LW2700 Wireless Home Monitor: Included cables and accessories

LW2700 Series Wireless Home Monitors support wireless cameras using a wireless signal. They do not have an internal battery and require a connection to a power source. Refer to your user manual for model specific information on cables and accessories. Click here for downloads and documentation for your product.

Most wireless home monitors include the following cable connections and accessories when purchased:

Network: Wireless camera Internet requirements

Standard wireless cameras that connect to a DVR / NVR, do not need access to the Internet to function. Stand-alone IP cameras do not require an Internet connection for basic functions, but an Internet connection is required for full functionality.

Security Cameras: Understanding Field of View (FOV)

Field of View (FOV) is the maximum observable area that is seen at any given moment through an optical device such as a camera lens. The coverage of the area can be measured using the horizontal and vertical distances to find the diagonal of the area in degrees. Mathematically, the FOV is calculated using the horizontal dimension of the sensor (h) and the Focal Length (F).

You can find the camera’s Field of View details in the Specifications sheet. Click here for additional support content including security camera documentation.

The Camera Lens, Sensor and Focal Length

Focal length (F) is the distance between the center of a lens and its sensor. The size of the lens is the aperture size.

These factors affect field of view. A narrower focal length captures more of the scene and displays a larger field of view. A wider focal length magnifies a scene and decreases the field of view. The higher the focal length value the lower the FOV.

Types of Camera Lenses

Fixed: a fixed camera focal length provides an Angular FOV which is permanently set and cannot be adjusted by the user. Varifocal: the camera focal length can be manually adjusted by the user. Generally, this is done manually with screws or dials. At Lorex we have motorized varifocal cameras that allow you to digitally zoom using your phone or NVR without losing details. These lenses provide flexibility and customization for your camera image needs.

The importance of Field of View

A wide angle lens or smaller lenses produce a greater field of view and captures more objects in a scene enhancing your ability to cover larger and wider areas such as foyers, parking lots or warehouses.

A narrow angle lens or larger lenses produce a smaller field of view; capturing a limited area, but the camera quality image improves in detail. These are designed to monitor a specific object, such as cash registers, entrances/exits, hallways or objects of value.

How to Calculate the FOV

To calculate the FOV requires the sensor size and the focal length of the lens: h = Sensor Size F = Focal Length of the Lens

FOV is represented by this equation: FOV = 2tan-1(h) / 2F

Example: h = 4.7mm F = 6mm FOV = 2tan-1(h) / 2F = 2tan-1(4.7)(12) = 2tan-1(0.39) = 2(21.4°) = 42.8°

W482CAD – 2K Wi-Fi Camera : Frequently Asked Questions

The following FAQ article answers many of the general questions about the 2K Wi-Fi Camera with Smart Deterrence (W482CAD). Where applicable, the FAQ includes links to articles where you may find more information.

.

Where do I place my Lorex 2K Wi-Fi Camera?

.

How should I position my Lorex 2K Wi-Fi camera?

When mounting the camera on a wall, make sure of the following:

 Accuracy of person detection will be influenced by multiple factors, such as the person’s distance from the camera, the height of the person, and the height and angle of the camera. Night vision will also impact the accuracy and distance of detection.

.

How do I enable motion detection and person detection?

1.Launch the Lorex App.

2.Tap  icon above the channel thumbnail on the Devices screen.

3.Tap Motion Detection Settings.

4.Tap  icon to enable Motion Detection.

Note: If motion detection is disabled, general/person/vehicle detection will automatically disable and you will not receive any motion detection notifications in the Lorex App.

.

How do I customize Motion Zones™?

Motion Zones™ allows you to customize your device’s motion detection region. Motion Zones™ screen consists of the following settings:

To set Motion Zones™

1.Launch the Lorex App.

2.Tap  icon above the channel thumbnail on the Devices screen.

3.Tap Motion Detection Settings.

4.Tap Motion Zones™.

 For full instructions on how to set customized Motion Zones™, see Configuring Motion Zones™.

.

Why am I receiving so many notifications?

There are a few ways you can lower the number of notifications you are getting.

.

How do I enable Color Night Vision?

1.Lauch the Lorex App.

2.From the Devices screen, tap  icon to configure device settings.

3.Tap  icon to disable Auto Night Vision.
Note: Disabling Auto Night Vision will force the camera into Color Night Vision mode. Recommended in low-light conditions.

.

How to activate Two-Step Verification?

1.Launch the Lorex App.

2.Tap Settings.

3.Tap Account Settings.

4.Tap Two-Step Verification.

5.Tapicon to enable Two-Step Verification.

For detailed setup instructions, see Two-Step Verification Setup.

.

How to optimize video quality?

1.Launch the Lorex App.

2.Tap  icon above the channel thumbnail on the Devices screen.

3.Tap Video Settings.

4.Tap  icon to enable HDR (High Dynamic Range).

Note: Enabling HDR optimizes video picture in high-contrast conditions such as under-lit and over-lit areas.
By default, the video quality is set to High (2x1080p HD).

.

What is Home & Away™?

Lorex App can automatically use your location to manage your notifications when you are at home or away. The app will notify you when you are inside/outside of your set home perimeter.

To start using this feature, navigate to your mobile device settings and enable Location services for Lorex App.

For detailed setup instructions, see Configuring Home & Away™.

.

How do I activate the LED deterrence light when motion is detected?

1.Lauch Lorex App.

2.From the Devices screen, tap  icon to configure device settings.

3.Tap Deterrence Light Brightness.

4.Tap  icon to enable camera’s deterrence light whenever motion or person is detected.

.

How do I remove the 2K Wi-Fi Camera from my account?

1.Launch the Lorex App.

2.From the Devices screen, tap  icon to configure device settings.

3.Tap Remove Device.

.

How to permanently delete data of 2K Wi-Fi Camera?

Refer to Formatting Device Storage for more information.

.

Does my device support WPA2 or WPA3?

Your device supports Wi-Fi Protected Access 2 (WPA2) which is the industry standard security protocol for Wi-Fi networks. WPA2 offers security against unauthorized access and data interception and is supported by most Wi-Fi routers including those that support both WPA2 and WPA3. It employs Advanced Encryption Standard (AES), an encryption mechanism, which secures communication between your camera and Wi-Fi network to keep transmitted data confidential. For information on which devices support WPA2 and which devices support WPA3, please refer to “WPA2 and WPA3 Supportive Devices.”

.

What are the compatible SD cards?

Refer to Compatible SD Cards and Storage Sizes for more information.

.

What devices are compatible with the 2K Wi-Fi camera?

Refer to Product Compatibility Chart for more information.

W482CAD – 2K Wi-Fi Camera : Installation

This article provides instructions to install your Lorex 2K Wi-Fi camera with Smart Deterrence (W482CAD).

.

What is included in the box?

The above contents are based on one camera.

.

How to connect with Lorex App

3.Open the Lorex App app and create an account or login with your credentials.

4.Tap  icon to add a new device, then follow the in-app instructions to complete the device setup.

For full instructions on Lorex App setup, see Connecting with Lorex App.

.

How to mount 2K Wi-Fi Camera to the wall

.

How to mount 2K Wi-Fi Camera to the ceiling

Wi-Fi Security Cameras – How to Read a MicroSD card

To view the contents of a MicroSD card on a laptop or computer, follow these steps:

a. Select the day to play back:

b. Click on the available folder:

c. Within the folder, click either the day folder (Video files) or the jpg folder (Snapshots):

d. Click to select a video time from 00 – 23 hours:

6.Click the MP4 video file to view the video. 

Wireless Home Monitor: Audio not working

If the audio is not working on your Wireless Home Monitor:

• Ensure that the protective film is removed from the camera lens.

• Ensure that the monitor volume is not muted. A mute icon () will be visible on the screen if the volume has been muted.

• Turn the monitor volume up using the volume buttons on the side of the unit. Location will vary by model. For exact location of volume buttons for your model, refer to your user manual. Click here for downloads and documentation for your product.

• The camera must be in Full Screen mode for audio. Tap the Channel Select icon () to switch between channels in Full Screen mode. Audio is disabled in Quad mode.

If audio is not working after increasing the volume and viewing in Full Screen mode, restore the system to default settings.

To restore your monitor to default settings:

CAUTION: Restoring to default settings will erase any setting input on the monitor. Your monitor will need to be reconfigured.

1.On the monitor tap the Menu icon ().

2.Use the joystick to select Settings > Default Settings.

3.Select Yes.

.

<p>The post Lorex Wireless Cameras and Monitors guide 2024 first appeared on NVR IPCAMERA SECURITY.</p>

What is iCSee?

iCSee is a mobile application designed for remote video surveillance. It allows users to connect and control various security cameras, network video recorders (NVRs), and digital video recorders (DVRs) using their smartphones or tablets. iCSee provides real-time video monitoring, playback, and management of surveillance devices over a network connection. The app offers features such as live streaming, motion detection alerts, two-way audio communication, video recording, and cloud storage options. iCSee is compatible with a wide range of IP camera brands and models, making it a popular choice for home security, business surveillance, and other monitoring needs.

What is iCSee camera?

iCSee Camera refers to any camera compatible with the iCSee mobile application.

Can my camera be connected to iCSee?

iCSee was developed by Xmeye, a company that specializes in security surveillance and video intelligence research and development. They focus on providing technical services, and solutions in the security monitoring field, including various modules, main boards, software, and cloud services.

So, generally speaking, only cameras using Xmeye module solutions can be adapted to iCSee app.

How to install iCSee for PC?

Wired cameras can be accessed on PC by downloading the VMS software. But, for Macbook users, the software currently only supports local area network connection.

For wireless cameras, it is recommended to connect through mobile devices, as accessing via PC may result in connection timeouts or instability.

VMS Downloading (Windows)

VMS Downloading (Macbook)

How to install iCSee app for mobile devices?

iCSee is a free app available for both iOS and Android platforms, offering full functionality without any costs or subscription fees. Follow these simple steps to install it on your device:

.

Explore our camera range: iCSee WiFi cameras, V380 4G cameras, and Ubox solar cameras. Engineered for home security, our cameras are affordable, low-power and durable, and our market share in third world countries is growing rapidly.

.

This tutorial applies to both icsee and icsee pro cameras.
Since the app is always being updated, the interface may be a little different.

Camera description

The details are subject to your manual.

Connect To The Power Supply

Plz connect camera to the power cable,and turn on the power .

If you need to storage the video via the local TF card, plz install the TF card first then turn on the power.

（TF card doesn’t support the hot plugging,  plz plug and unplug memory card when device is power off)

Video tutorial

How To Use Icsee Camera 2024

Read Also : XMEYE NVR Face Recognition guide

.

Register/Login

1.Open”iCSee” app, click “sign up” then use the phone number or mailbox to register account.

2.Register successfully, enter your phone number or mail number in the login interface, enter the password, login your app.

3.You can also use the wechat, facebook, line or the temporary visit to login app.

[Auto-pairing] WiFi Network Configuration

Note: camera can support 2.4G wifi for the time being, doesn’t support 5Gwifi, plz set the router parameter to2.4G first before configuring network, during the connection, phone,router and camera need keep within the 2m distance

1.Phone connect to the wifi network.

2.Click the “+”in the upper right corner click the “Add WiFi camera” according to the device’s voice prompt, follow the app interface guide to enter router’s password,click “confirm” start to configure network(if the device doesn’t appear voice prompt for a long time, you can long press the reset to restore default, then go on to configure network).

3. Enter the search device’s interface, the device is in the connection process, plz wait.

※ Program search, do not operate other programs ;

※ When the camera prompts “succes  sfully connected to router”, it will automatically go to the next step.

※ The camera fails to hear the prompt “succes sfully connect to router”. Please restore factory Settings and match again.

4. After connecting successfully ,interface will prompt to set device’s password and name for your device, after finishing, follow the app interface guide to complete network configuration .

5. After finishing, device will show in the device’s list, it represent the device is connecting successfully.

6. Click it you can view the monitoring image, and do the relevant operation and setting.

Note: Movement tracking is only for indoor ip cameras , bullet ip camera and dome cameras do not have this function

Note: If the automatic etwork configuration fails, you can choose the following two methods to configure the device

The second type: [Manual configuration] Wired network

1. Long press the camera Reset button for 10 seconds to restore the device to factory settings .

2. Connect your router to camera via network cable.

3. Connect phone to your router wifi network.

4. Login “iCSee” app, click the “+”in the upper right corner, and click “more” in the upper right corner.

5. click “Add the camera on same router.

6. Enter search device interface, click searched camera to add device,device will show in the device’s list, which represent device connect successfully.

7. Click it to view the monitoring image, also can do the relevant operation and setting

Manual configuration: AP netless direct connection mode

When there is no network in the installation environment, please select the following pairing method;

 1. Long press the camera Reset button for 10 seconds to restore the device to factory settings .

2. Short press the camera Reset button 2-5 to enter the direct connection mode (most devices will voice prompt “enter direct connection mode”).

3. Open the mobile phone desktop-settings-wireless network, search for the device wireless hotspot name, Enter the wireless password:1234567890, connect to the wireless hotspot of the device;

Indoor IP Camera hot spot name: robot_xxxx;

Other kind of camera hot spot names: camera_xxxx;

Tips:

AP hotspot mode is only used for installation when there is no network in the environment, and cannot be remotely monitored,can only be accessed within 10 meters of the establishment of the hotspot!

4. Open the ‘iCSee’ APP, and directly add the device in the local direct connection mode.

5. The device is displayed on the device list interface, which means that the device is successfully connected.

6. Click the ‘Play’ button to enter the monitoring screen and perform related operations and settings.

7. If you have already registered an account to log in, please click the “+” sign at the top right, and click the “AP direct connection” mode to add.

How to set up mobile tracking？

Note: Mobile tracking and smart humanoid alert can’t be used at the same time;

●Click the “Mobile Tracking” switch buttonin the preview interface to turn on the corresponding function;

●Motion tracking: when it’s on, as long as an object enters the camera’s illumination range, camera will track the moving trajectory;

●Watch Point: set a fixed position, when the camera is operating or tracking, it will automatically return to the set position after staying for a period of time;

How to set the dual-ligh tal ert mode Star light full color？

Note: Mobile tracking and smart humanoid alert can’t be used at the same time;

Open the ‘iCSee’, click the ‘real-time playback’ , click or slide to the “light” or the “bulb” icon in the screen to open the setting screen;

●Night colored lights：When the light is insufficient, the white light will start, and the image will be colorful;

●Infrared night vision： When the light is insufficient, the infrared light is activated and the image becomes black and white;

●Double light alert：When the light is insufficient, the infrared light will be activated. When someone enters the monitoring screen, the white light will be triggered and the image will be colorful.
After a few seconds when the person walks away, the infrared mode will be switched on and the image will become black and white;

How to s et the humanoid alert function?

Note: Mobile tracking and smart humanoid alert can’t be used at the same time;

Open the ‘iCSee’, click the device real-time playback, click on the upper right button ‘setting’ ，Enter the ‘settings’-smart alarm, open the interface to make related settings.

Function introduction:

 
●Notification: Must be turned on to receive alarm trigger information.

●Humanoid detection: only judge and detect people to trigger an alarm;

●Show Tracking: When the human figure appears on the screen, the human figure can be tracked and reminded; Rule setting: select the designated area [Warning Line], when someone enters the divided area, the alarm can be triggered;

Add shared device

1. Click “Share” in the device list to pop up the QR code page using the main phone.

2. Log in to the ‘iCSee’ APP with the mobile phone you want to share,
click the “+” sign in the upper right corner of the APP main interface, click “Scan QR code to add a camera” , scan the QR code of the device shared by others or input Add the device serial number (the shared device must be connected to the Internet and successfully
added to the APP).

How to Restore factory settings/AP hotspot switching？

1. Long press the camera ‘Reset ‘ button for 10 seconds, and you can let go when you hear ‘ Restore factory setting,please wait’.

2. Short press the camera Reset button 2-5 to enter the direct connection mode (most devices will voice prompt “enter direct connection mode”).

How to query device serial number and info?

1. Open the ‘iCSee’, enter the real-time playback of the device, click on the upper right setting to enter the setting center-about the device , the QR code can be directly scanned and shared with other family members to watch (the QR code valid time is 30 Minutes); if exceeded, it will automatically expire;

2. If you find that the device time is not synchronized, please click the device time to synchronize it;

HOW TO USE THE CAMERA?

1.Please open the software to register one and log in to your account if you do not have an account.

2.Click “+” > Set up “MY DEVICE” to WiFi

3.Enter your WiFi password. Then click “confifirm” and wait for the camera to connect it.

Notes

* Please reset the device if the camera does not have any voice reminders for more than 180 seconds.

* Please check the WiFi password again and make sure the WiFi channel is 2.4GHz.

* Please do not make the device too far away from the Router.

4.Upon a successful connection, you can set up the name and the password of the camera.

SHARE THE CAMERA：

1.The administrator can send the QR code and password of the camera to the other persons.

2.Scan the QR code by the administrator to share with you and add the camera.

Infographics

.

<p>The post How To Use Icsee Camera 2024 first appeared on NVR IPCAMERA SECURITY.</p>

How To Enable IP Camera Offline, Analog Camera Disconnection Notification Alerts

One of the most important features of any security system is its ability to alert you when something goes wrong. Whether it’s an IP camera offline or an analog camera that stopped working, a storage failure, or any other exception, you want to know about it as soon as possible. That’s why Camius DVR and NVR camera systems offer various options for setting up alerts or notifications for different events. While cheap IP and analog CCTV camera systems often lack this feature, Camius provides this advanced functionality, setting it apart from other systems.

Exception Settings in Camius NVR and DVR camera systems

Camius NVRs have ‘Exception’ settings under Setup >> Alarm >> Exception, where you can choose the alarm type. These include:

This is an example of the NVR’s local user interface menu while the recorder is connected to the monitor

Local User Interface and Web Browser Interface

The settings can be accessed through two interfaces:

This is an example of the menu while you access the Camius DVR or NVR recorder using a web browser

Push Notifications alerting about wireless or wired analog / IP camera offline on Camius View App

In addition to the settings on your Camius Security Camera DVR or NVR Network Video Recorder, you can also set up push notifications on your Camius View app. These notifications include Video Loss alarm and HDD alarm. To do this, you’ll first need to add the NVR to your app (follow this guide about adding the Camius DVR or NVR to the Camius View app).

Once the NVR is added, you can select the types of push notifications you want to receive directly from the app.

Push Notifications related to Storage (HDD or Micro SD card) installed to the Camius camera system)

Push Notifications related to the IP or Analog or Wireless Camera Disconnection

Read Also : LaView NVR Setup and User Guide

Regular maintenance can prevent issues like a CCTV camera disconnected, ensuring continuous surveillance.

Regular maintenance can prevent issues like a CCTV camera disconnected, ensuring continuous surveillance. However, sometimes problems may arise that affect the connection of your security cameras. In such cases, you need to troubleshoot the issue and find the cause of the disconnection. Depending on the type of camera system you have, the steps may vary. For analog security camera systems, you need to check the power supply, the cabling, and the DVR settings. For wired PoE power over ethernet camera systems, you need to check the network connection, the IP address, and the NVR settings. To learn more about how to troubleshoot these issues, you can refer to the following guides:

How to Setup DDNS on Camius DVR and NVR Surveillance Recorder?

To setup DDNS for Camius security cameras, you’ll first need to register for a DDNS service, obtain a domain name, activate DDNS in your camera’s network settings, and then input your DDNS account’s hostname, username, and password.

If you want to access your Camius DVR or NVR recorder remotely from your PC, you might encounter some difficulties with dynamic IP addresses. A dynamic IP address is one that changes every time you connect to the internet, making it hard to establish a stable connection with your recorder. That’s where DDNS comes in handy.

What is DDNS?

Dynamic DNS, or DDNS, stands for Dynamic Domain Name System, and it allows you to assign a static domain name to your recorder, regardless of its IP address. This way, you can always connect to your recorder using the same URL without worrying about IP changes.

Dynamic DNS lets you access your Camius security camera device on the internet with an easy-to-remember web address like “camiusnvr.dyndns.com” instead of a hard-to-remember IP address like 216.144.47.245. This is useful when you want to connect to your security camera, DVR, NVR from anywhere in the world.

Setting up DDNS

In this guide, we will take you through the steps of setting up DDNS on your Camius DVR or NVR recorder. You will need to have an account with a DDNS service provider, such as DDNS_3322, DYNDNS, NO_IP, CHANGEIP, or DNSEXIT.

Step 1:

Create an account on your preferred DDNS service provider website and a domain name (which is a hostname for your Camius DVR/NVR or an IP camera). Each of these providers offers free and paid accounts, which you need to select based on your requirements.

You will need to provide your email address and create a password. After verifying your email, you will be able to log in to your dashboard. The process of creating an account with DDNS service providers is similar.

Create a domain name for your recorder on the DDNS server. You can usually choose any domain name (hostname) you like, as long as it is not already taken. For example, you can use something like camius.no-ip.org or camius2023.dyndns.com

Step 2:

Configure DDNS settings on your Camius DVR or NVR recorder.

Step 3:

Step 4:

Enter the Domain name (hostname) in a web browser tab bar to access your Camius DVR/NVR remotely from a PC or Mac. Enjoy!

How do I backup NVR or DVR settings?

You can export the main menu settings you have configured to a USB flash drive, or import an exported setting file from USB flash drive to the NVR.

Camius user interface menu for reference to backup NVR, DVR configuration

Camius IPVAULT2256PR menu (16 Channel NVR)

Camius TRIVAULT4K2168R menu (16 Channel Hybrid DVR)

Camius IPVault1128PR menu (8 Channel NVR)

Camius IPVault1128PR menu (8 Channel NVR)

.

Camius Hybrid DVR Camera Systems are in high demand by Gas Stations and Retail Stores

Security and surveillance are paramount today, especially for businesses like gas stations and retail stores. The demand for advanced surveillance solutions has risen with the increasing need to protect assets, employees, and customers. Camius, a renowned provider of security systems, introduces its innovative Hybrid DVRs, a perfect solution for enhancing security in gasoline pumps and retail stores. This article explores the numerous advantages and unique features of Camius Hybrid DVR camera recorders that make them stand out in the market.

1. Gas Stations, Retail stores upgrade to Camius 4K security at minimal cost

One of the major benefits of choosing Camius DVR camera systems is their cost-effectiveness. Camius innovative 8 and 16-channel DVR recorders significantly reduce the cost of upgrading surveillance systems by eliminating the need for new wiring. Business owners can retain their existing coaxial wiring infrastructure and only replace the DVR recorder and cameras when necessary.

Traditional camera upgrades often entail the labor-intensive process of rewiring the entire premises, which can be time-consuming and expensive. With Camius DVR camera systems, this hassle is eliminated. The compatibility with existing coaxial wiring not only saves costs on new cabling but also reduces the installation time, causing minimal disruption to the business operations during the upgrade process.

Moreover, reusing the same wiring infrastructure does not compromise the system’s performance or reliability. Camius DVRs are designed to seamlessly integrate with the existing coaxial cables, ensuring smooth transmission of high-definition video and data without any loss in quality.

By opting for Camius DVR camera systems, business owners can enjoy cutting-edge surveillance technology without breaking the bank. The ability to upgrade to the latest DVR recorder and cameras as needed while keeping the existing wiring makes Camius an economical and future-proof choice for filling stations and retail stores.

In conclusion, Camius Hybrid DVRs offer various benefits, including reduced upgrade costs, compatibility with existing wiring, and ease of installation. Business owners can enhance their security measures without a significant financial burden and rest assured knowing they have invested in a reliable, advanced, and cost-effective surveillance solution.

2. The Power of Hybrid DVRs

2.1 What are Hybrid DVRs?

Hybrid DVRs combine the capabilities of traditional Digital Video Recorders (DVRs) and Network Video Recorders (NVRs). They allow users to utilize both analog and IP cameras, providing flexibility and compatibility with existing systems.

12 Channel Hybrid DVR camera recorders

24 Channel Hybrid DVR camera recorders

2.2 The Advantages of Hybrid Technology

Camius Hybrid DVRs offer businesses the best of both worlds. By supporting analog and IP cameras, they enable a seamless transition from analog to IP surveillance, protecting previous investments while embracing modern technologies.

3. Ultra High Definition Surveillance

3.1 Crystal Clear Resolution

Camius Hybrid DVRs support high-definition cameras, capturing clear and detailed images. This level of resolution is crucial for identifying faces, license plates, and other critical details in businesses.

3.2 4K Ultra HD Recording

With 4K Ultra HD recording capabilities, Camius surveillance DVR camera reocrders ensure that every inch of the surveillance area is captured in astonishing clarity, leaving no room for ambiguity or doubt.

4. Intelligent Video Analytics

4.1 Smart Motion Detection

Camius Hybrid DVRs are equipped with intelligent video analytics, including smart motion detection. This feature lets the system detect and alert users of unusual activities, such as unauthorized access, loitering, or suspicious movements. Only with Camius DVR records can you detect video motion, vehicles, and pedestrians! You can also set multiple motion detection areas for analog and IP cameras.

Web browser view

4.2 Advanced AI Technology

Integrating advanced AI technology empowers these DVRs to recognize specific objects, track movements, and even provide heat mapping to identify high-traffic areas in commercial locations.

AI functions with Analog and Camius IP cameras (TRIVAULT4K2168R)

5. Remote Access and Mobile Monitoring

5.1 Stay Connected Anywhere, Anytime

Camius Hybrid DVRs offer remote access capabilities, enabling business owners and managers to monitor their business premises using smartphones, tablets, or computers from anywhere in the world. Whether you have a Windows PC, Apple Mac or iPhone, iPad, Android smartphone, or tablet, the DVR is compatible!

5.2 Real-time Alerts on the Go

With mobile monitoring, users receive real-time email alerts and push notifications on their devices, ensuring prompt actions can be taken in case of emergencies or security breaches.

6. Enhanced Storage Options

6.1 Efficient Data Storage

Camius Hybrid DVRs support various storage options, including 3.5″ SATA HDD, 2.5″ SSD, and even Cloud storage, ensuring ample space to retain crucial surveillance footage for extended periods.

Camius Hybrid DVR camera recorders work with Dropbox and Google Drive. Click HERE for more information.

6.2 Scheduled Backup and Archiving

The DVRs allow users to schedule automated backups and archiving, providing an additional layer of data protection and seamless storage management.

7. DVR Recorder with User-Friendly Interface

7.1 Easy Setup and Configuration

Camius Hybrid digital video recorders boast a user-friendly interface, simplifying the setup and configuration process. Business owners can quickly deploy the system without requiring extensive technical expertise.

CLICK HERE for the DVR installation guide

7.2 6.2 Intuitive Control

The intuitive control panel and mobile app make it effortless for users to navigate through various features and access the necessary information promptly.

8. Conclusion

Camius Hybrid DVRs have proven to be a game-changer for businesses, offering a perfect security solution with their hybrid capabilities, high-definition surveillance, intelligent video analytics, remote access, and user-friendly interface. By choosing Camius Hybrid DVRs, businesses can ensure comprehensive security, loss prevention, and a safer environment for customers and employees alike.

FAQs

1. Are Camius Hybrid DVR camera recorders compatible with existing security camera systems?

Yes, Camius Hybrid DVR recorders are designed to be compatible with both analog CVBS, AHD, CVI and TVI  and IP Onvif conformant cameras, making them an ideal choice for businesses looking to upgrade their security systems without discarding existing cameras.

2. How can I access the recorded footage remotely?

You can access the recorded footage remotely through Camius’ user-friendly mobile app or Camius DVR software. Simply install the app on your smartphone or tablet, and you can monitor your gas pumps and retail stores from anywhere with an internet connection.

3. What is the storage capacity of Camius Hybrid DVRs?

Camius Hybrid DVRs support various storage options, including HDD, SSD, and Cloud storage. The capacity can be chosen based on the business’s needs and the required retention period for surveillance footage. CLICK HERE for the list of compatible hard drives

4. How reliable are Camius Hybrid DVRs in terms of data protection?

Camius analog DVR camera recorders come with advanced data protection features, including scheduled backup and archiving. These ensure that your surveillance footage is securely stored and protected from data loss or tampering.

How to use 2 way audio security cameras?

The feature of two way audio security cameras empowers users to both receive and transmit audio through their IP camera, adding an extra layer of interactivity and communication to the security setup.

Camius presents its cutting-edge 4K spotlight PoE cameras that come equipped with built-in high-quality microphones and speakers, eliminating the need for external attachments to enable the two-way audio function. For optimal performance, it is recommended to install Camius PoE cameras alongside Camius PoE or Non PoE NVR recorders or Hybrid DVRs.

 .

The latest R series NVR and DVR recorders facilitate seamless control of Camius spotlight cameras, microphones, and speaker volumes directly from the NVR settings. Additionally, users can conveniently modify the audio encoding format per their requirements. To troubleshoot two-way audio, turn down the input volume and output volume and test switching audio code type (G711A and G711U).

Two factors can affect the audio quality: network and distance.

The recommended distance for the microphone to transmit quality sound is 9.5 to 16 feet.

To engage in two-way audio communication, the Camius View app is the go-to platform.

Here’s a simple guide to using the 2 way audio security cameras feature:

It’s important to note that the two-way audio experience with Camius security cameras is characterized by live bidirectional communication and not an intercom-type function.

In most scenarios, the mute function is enabled by default. By enabling audio, users can record audio from the microphone of their security camera. To listen to the recorded audio, whether in live mode or during playback, it is necessary to open the individual channel in full screen on which the audio-enabled security camera is operating. This applies to both NVR and app usage.

However, it’s crucial to exercise caution while utilizing surveillance audio, as its usage might be restricted or subject to regulations depending on the location. Always ensure to verify with local authorities on the proper and legal use of security cameras with audio to avoid infringing upon privacy laws. Unauthorized audio recording can be considered illegal in certain jurisdictions. Hence, Camius emphasizes the significance of complying with local laws and assumes no liability for the misuse of its surveillance cameras that do not align with the respective regulations.

The Impact of Artificial Intelligence in IP Cameras: Why Camius Stands Out

In recent years, the integration of artificial intelligence (AI) has revolutionized various industries, and the field of IP cameras and other security systems is no exception. AI-powered IP camera systems have significantly enhanced surveillance capabilities, enabling advanced analytics, real-time monitoring, and improved security. Among the leading players in this field, Camius stands out as a pioneering brand that has embraced AI technology to deliver exceptional performance and innovation. In this article, we will explore the applications of AI in IP camera systems and why Camius has become a prominent name in this industry.

The Role of Artificial Intelligence in Security Camera System

Artificial intelligence has transformed IP camera systems by providing advanced functionalities and intelligent features that greatly enhance their effectiveness. Here are some critical applications of AI in IP camera systems:

Why Camius Stands Out

Among the various brands in the IP camera industry, Camius has emerged as a frontrunner in implementing AI technology into their camera systems. Here are some reasons why Camius stands out:

Artificial intelligence has revolutionized the IP camera industry, enabling advanced analytics, real-time monitoring, and enhanced security. Camius has distinguished itself within this landscape by harnessing AI technology to deliver cutting-edge IP camera systems. Through its robust AI algorithms, customizable solutions, real-time insights, scalability, and user-friendly interfaces, Camius has established itself as a prominent player in the field. As AI continues to evolve, Camius remains committed to pushing the boundaries of innovation.

<p>The post Camius Devices FAQs and How-Tos first appeared on NVR IPCAMERA SECURITY.</p>

The following Swann Security cameras can only be viewed and accessed via the Swann Security app from a mobile device.

They cannot be added to Swann security system recorders, such as DVRs, NVRs, and NVWs. These recorders are compatible with specific system camera models.

Can a SWIFI camera work without Internet?

Internet is required as the SWIFI cameras communicate to the P2P server using the Internet to stream to the Swann Security app and upload recordings to the cloud.

Compatible Routers

Any of the following routers are compatible provided they have a 2.4 GHz frequency:

For more information, see What router WiFi frequency band is my SWIFI camera compatible with: 2.4GHz VS 5GHz Frequency?

Compatible Wi-Fi extender or repeaters

It is possible for the SWIFI camera to pair to the router via WiFi extender if the extender is compatible and setup correctly to the router. Troubleshooting and configuration of your extender’s settings have to be performed by your router manufacturer support team, Internet Service Provider or your IT department. See this article: How to boost your WiFi signal and extend WiFi range.

Tip: Try to pair the camera to the router first to check whether its internal network adapter is working. If it works via router but not extender, then there’s a chance the extender is not compatible.

Swann Wi-Fi camera FAQs

Read More : Swann Security Troubleshooting All Devices

Not Compatible / Not Recommended

We do not recommend SWIFI cameras to be connected to the following devices because they cannot provide the necessary network configuration information to the camera to allow it to join the network automatically unless your network device is configured. Troubleshooting and configuration of your device’s settings have to be performed by your router manufacturer support team, Internet Service Provider or your IT department.

Can I view my SWIFI camera on a TV / computer or record to a DVR / NVR?

The cameras above are hub-free. A hub is a base station or recording/storage device that connects via the Internet to the cameras. In contrast, a hub-free camera operates on Wi-Fi exclusively without requiring any additional hardware to store footage. 

A hub-free (standalone) Wi-Fi camera is only capable of:

These features make a hub-free Wi-Fi camera suitable for users who prefer a wireless setup, easier DIY installation, less hardware, and less footage to check in low-traffic areas of view. 

Accessing live view, recordings, and other settings are covered in the manuals below for your device: 

How do I tell whether my router’s WiFi signal is 2.4GHz or 5GHz for pairing a SWIFI camera?

This is one of the most common reasons why a connection will fail while trying to pair a SWIFI camera to your Swann Security account. If you try to pair a SWIFI camera to the incorrect frequency or SSID name, the error that appears on the app can be one of the following:

Via Mobile Device Settings

One way to tell if the phone is connected to the correct frequency of the router is by checking the name of the SSID (the default name of your router’s WiFi hotspot): 

In the example above, the router has multiple SSIDs. An SSID that has “_2.4GHz,” “24G,” “2.4,” or “24” appended at the end is most likely a 2.4GHz signal. This is the network your phone needs to be connected to before you start pairing a SWIFI camera. 

To avoid connecting to a 5GHz SSID, see How to forget 5GHz connection for pairing a SWIFI camera.

Via Router GUI

If you see two or more Wi-Fi network names that belong to you without 24 or 5, then one may be a 5 GHz band. To identify which name uses 2.4 GHz or 5 GHz, login to your router’s settings. 

For assistance with accessing or navigating your router, contact the manufacturer of your router or your Internet Service Provider if you do not know. Swann Tech Support can only assist in pairing IF your router has a 2.4GHz signal and if you already know the correct WiFi credentials of your router.

How to change the time zone of my SWIFI camera in the Swann Security app?

The error “Device Timezone Out of Sync” appears if your camera’s time zone is different from your phone app’s time zone. 

If your camera is in a different location (with different time zone) than your mobile device, you can ignore hit Cancel. 

If the date and time displayed on the camera’s Live View is incorrect, do the following: 

Repeat each step for each camera device paired to your Swann Security account.

How to create Guest account on a WHD-PTCAM using SwannView Link software?

Installing SwannView Link

Adding the camera

Since the computer is on the same router or modem already, when you open SwannView Link the camera will be auto-detected, but the password will not be entered yet. You will see the error message below. Just click on OK.

How to forget 5GHz connection for pairing a SWIFI camera

Some mobile devices have a tendency to switch between hotspots or SSID automatically. This can disrupt the pairing process when setting up your SWIFI camera to your mobile device. 

To avoid connecting to a 5GHz signal or the wrong hotspot during pairing, forget the 5GHz connection: 

Note: If you see a WiFi name that ends with _ext, it is most likely a WiFi extender.

How to hard reset Floodlight Security Camera (SWIFI-FLOCAM2 / SWWHD-FLOCAM)

Performing a factory or hard reset of the camera will:

How to factory reset via physical button

1.Locate the Reset button (see below figure) on the SWIFI-FLOCAM2 / SWWHD-FLOCAM. It is behind the camera module covered by a rubber flap.

2.Press and hold the Reset button (for 20 seconds).

3.When the blue LED indicator on the camera turns off, release the Reset button.

4.The camera will start the factory reset process which can take up to 2 minutes.

5.Once factory reset is complete, it will be in Pairing mode (LED will be in slow blinking blue).

After you factory reset your device, you’ll have to pair it with your Wi-Fi network again.

How to hard reset SWIFI-2KOCAM / SWIFI-SPOTCAM / SWWHD-OUTCAM

Performing a factory or hard reset of the camera will:

How to factory reset via physical button

1.Locate the Reset button (see below figure) on the twin cable of the SWIFI-2KOCAM / SWIFI-SPOTCAM / SWWHD-OUTCAM.

2.Press and hold the Reset button (for 20 seconds).

3.When the blue LED indicator on the camera turns off, release the Reset button.

4.The camera will start the factory reset process which can take up to 2 minutes.

5.Once factory reset is complete, it will be in Pairing mode (LED will be in slow blinking blue).

After you factory reset your device, you’ll have to pair it with your Wi-Fi network again.

How to hard reset SWIFI-BUDDY

Performing a factory or hard reset of the camera will:

How to factory reset via physical button

1.Ensure the camera has been fully charged for at least 4 hours prior.

2.Locate the SET button and RST pinhole (see below figure) on the back of the camera.

3.Press and hold the SET and RST button (pin required).

4.After 2 seconds, release RST button.

5.Once blue LED turns off (or after 15 seconds), release SET button.

6.Once factory reset is complete, it will be in Pairing mode (LED will be in slow blinking blue) and you will hear it say “Ready for pairing”.

After you factory reset your device, you’ll have to pair it with your Wi-Fi network again.

How to hard reset SWIFI-CORECAM / SWIFI-COREPRO

Performing a factory or hard reset of the camera will:

How to factory reset via physical button

1.Ensure the camera has been fully charged for at least 4 hours prior.

2.Locate the Reset button (see below figure) on the camera.

3.Press and hold the Reset button (for about10 seconds).

4.Once the LED indicator on the camera turns off, release the Reset button.

5.The camera will start the factory reset process which can take up to 2 minutes.

6.Once factory reset is complete, it will be in Pairing mode (LED will be in slow blinking blue).

After you factory reset your device, you’ll have to pair it with your Wi-Fi network again.

How to hard reset SWIFI-PTCAM2 

How to hard reset SWIFI-XTRCAM

How to set SWIFI-MOTION / SWIFI-WDOOR / SWIFI-LEAK / SWIFI-ISIREN to pairing mode

Setting the sensor or siren to pairing mode will:

Note: If the sensor or siren is paired to your account and the Wi-Fi details did not change, it will connect back to the same network once pairing mode times out after 3 minutes.

Why does my WiFi camera stop recording motion after a minute?

Wireless standalone cameras can only record by PIR/motion. Where the camera is mounted can have an impact on how effective movement is picked up and recorded. 

Reasons:

 .

Fix: Reposition the camera or add another camera for a different angle of view.

The ideal position of the camera is 7-8 feet high, pointing downwards at an angle to cover the area where people will be walking across the camera’s path.

Can I pair my SWIFI-BUDDY to another receiver/chime?

How do I share my WHD-PTCAM?

Sharing the WHD-PTCAM

Scan to add a camera

How many files can I store in my SwannCloud account?

As of now, the SwannCloud can let you record 15 seconds per event and it will be stored approximately 5 days. In the future, there will be some other options to be chosen with regards to this but there are no approximate date of arrival yet.

How to check the battery level of my Wi-Fi camera?

This applies to SWIFI-CAM, SWIFI-CORECAM, SWIFI-COREPRO, SWIFI-XTRCAM, SWIFI-BUDDY, SWIFI-MOTION, SWIFI-LEAK, SWIFI-WDOOR, SWIFI-SIREN.

There are 2 ways:

• Dim than normal (for sensors)

• Blinking purple (for SWIFI cameras)

Note: If the Device Status is Disconnected, the battery level shown is the last that was synced to the Swann Security server and your phone before the camera disconnected. This means the current battery level cannot be seen until the camera is recharged and reconnected to the network. 

How to delete recordings of a SWIFI camera in the Swann Security app

There are two ways to delete recordings of a standalone Wi-Fi camera that is compatible with the Swann Security app.

Delete one or few recorded clips: 

1. Go to Playback.

2.Tap on the Storage (microSD card) icon on the top beside the logo.

3.Select your device. (pause and wait for the clips to load. If there are none, it means that the camera does not have a microSD card or internal storage)

4.Tap on the trash / bin icon beside the recording with timestamp you wish to remove.

Delete all recordings (Format the internal storage)

Note: Formatting deletes all recordings from local storage or microSD card. It will not delete the recordings from the cloud. Once deleted, they cannot be recovered.

1.Go to Devices > select your device.

2.Go to Settings > System Settings.

3.Tap Format.

4.Select Confirm.

How to hard reset 4K Floodlight Camera (SWIFI-4KOCAM)

How to hard reset SWIFI-2KICAM

How to hard reset SWIFI-ALERTCAM / SWWHD-INDCAM

How to hard reset SWIFI-CAM

How to hard reset SWIFI-FOURTIFY

How to hard reset SWIFI-TRACKCM

Performing a factory or hard reset of the camera will:

How to factory reset via physical button

1.Locate the Reset button (see below figure) on the SWIFI-TRACKCM. 

2.Press and hold the Reset button (for 20 seconds).

3.When the blue LED indicator on the camera turns off, release the Reset button.

4.The camera will start the factory reset process which can take up to 2 minutes.

5.Once factory reset is complete, it will be in Pairing mode (LED will be in slow blinking blue).

After you factory reset your device, you’ll have to pair it with your Wi-Fi network again.

How to playback recordings? ( via Swann Security App)

Playback tab

Open Swann Security, login your account, tap on Playback

NOTE: As of v2.7.45 in Android, you can get a preview (like a GIF) instead of a generic icon for a recorder’s clip if you enable Show playback preview under Stream Option. 

• Go Back to see results. Tap the burger icon at the upper left.

Playback Interface

How to test Wi-Fi password for pairing SWIFI cameras

This step is useful: 

 How to forget the network in your mobile device: 

.

<p>The post Swann Wi-Fi camera FAQs first appeared on NVR IPCAMERA SECURITY.</p>

CloudEdge Battery Powered Camera

C10&C10-TZ: Add Camera to CloudEdge

Method 1:

Method 2:You can connect the camera as follows.

https://cdn.shopifycdn.net/s/files/1/0581/4521/0500/files/C10_10.png?v=1661847728

If the light turns blue, the connection is successful.

Hiseeu CloudEdge Battery Powered Camera Guide

Read More : HiSeeu Wireless Camera System installation guide

GL-C10+: Add Camera to CloudEdge

Install CloudEdge app

Search CloudEdge in your mobile app store or scan the following 

QR code to download and install.

Register account and login 

Launched the CloudEdge app, sign up an account by a valid Email 

address as the new user and then log in.

Press the power button then the floodlight turns on and the camera indicate light will also turns red flashing.

And then press the reset hole for 5s to reset the camera

Connect the device 

1) Log in CloudEdge app, tap Add Device then choose Battery 

Camera.

2) Start to connect the camera.

Select your home Wi-Fi and enter the correct password.

3) Point the camera to the QR code at a distance of about 5-8 

inches, after recognizing, you will hear a prompt sound, then tap next.

4) Wait for connection. 

C10&C10-TZ: How to solve the problem of camera connect failed?

Please follow the following solution.

1. First of all, you need to charge the battery to check if there is no electricity.If this red light is on, it means it’s ready to charge.

2.You can press the power button and see if the indicator should light red and blink slowly.

3. Press the camera reset button with the reset pin for 7 seconds to reset the camera.

1)This camera can only connect to 2.4 GHz WiFi signal. It does not support 5 GHz wifi. Please check whether your mobile phone is connected to 2.4 GHz WiFi or 5 GHz wifi.

2）Since some settings of your router may block camera connections, try resetting your router.

3）Use your mobile phone to try to turn on the hotspot function. Set the hotspot name and password to the name and password of your router’s 2.4 GHz WiFi. Then connect the hotspot with another cell phone to connect the camera.

Please follow the steps prompted by the link to reconnect the camera:

https://www.hiseeu.com/a/help/article/27395

4. If the red light is on, the connection is successful

If you try those ways still can’t fix it, pls email us : Support@aomeisi.vip

GL-C10:How to solve the problem of camera connect failed?

Please follow the following solution.

1. First of all, you need to charge the battery to check if there is no electricity.If this red light is on, it means it’s ready to charge.

2.You can press the power button and see if the indicator should light red and blink slowly.

3. Press the camera reset button with the reset pin for 7 seconds to reset the camera.

1)This camera can only connect to 2.4 GHz WiFi signal. It does not support 5 GHz wifi. Please check whether your mobile phone is connected to 2.4 GHz WiFi or 5 GHz wifi.

2）Since some settings of your router may block camera connections, try resetting your router.

3）Use your mobile phone to try to turn on the hotspot function. Set the hotspot name and password to the name and password of your router’s 2.4 GHz WiFi. Then connect the hotspot with another cell phone to connect the camera.

Please reset the camera and reconnect the camera.Please follow the link to connect the camera

https://www.hiseeu.com/a/help/article/39895 

C10/ C10-TZ,It turn on but now it won’t record?SD card not recognized！

1、You can install the SD card on another device to see if other devices can recognize the SD card.

If other devices can recognize the SD card, format the SD card with another device.

2、Do you have another SD card? Please try to install it on the camera with another SD card to see if the camera can recognize another SD card

C10-TZ: The solar panel is not charging the camera.

Solar panel is a device that converts sunlight into electric energy. If the sunlight is not enough, the solar panel will not provide sufficient power for the camera. At this time, the solar panel can only maintain the normal operation of the camera. If the continuous cloudy day, the solar panel can not even maintain the normal operation of the camera, the power of the camera will be reduced.

We suggest that the solar panel should be installed in the place where the strong sunlight can be received continuously. If it is cloudy continuously, we suggest that you can charge the camera with a charger to wait for the sunny day.

C10 /C10-TZ，Can I use Cloud?

Yes, you can use cloud storage to store your videos. If you open it for the first time, you can also enjoy seven days of free cloud storage. This camera will only start recording when it detects a human body. Our videos can also be stored on SD cards.

SD card Up to 128GB.The 32 SD card can usually store records for nine months or more.

C10 /2C10/C10-TZ: Camera can’t connect to WiFi

Please follow the following solution.

Press the camera reset button with the reset pin for 7 seconds to reset the camera.

1)This camera can only connect to 2.4 GHz WiFi signal. It does not support 5 GHz wifi. Please check whether your mobile phone is connected to 2.4 GHz WiFi or 5 GHz wifi.

2）Since some settings of your router may block camera connections, try resetting your router.

3）Use your mobile phone to try to turn on the hotspot function. Set the hotspot name and password to the name and password of your router’s 2.4 GHz WiFi. Then connect the hotspot with another cell phone to connect the camera.

How to set the alert

Step 1: please click “setting” button as picture shows.

Step2: If you want receive notification,please click the button on;

     And please click alarm setting

Step3:please click motion detection on and if you want to change the sensitivity of motion detection,please select digital adjustment sensitivity. 1 is the lowest sensitivity and 10 is the highest sensitivity. Please adjust according to your situation. If you want to reduce false positives, you can lower the sensitivity.

If these settings not work,please reset the camera.Thank you.

If you want to receive APP alarm alerts, you can open these two options.

C10/C10-TZ, Convert records to video files for viewing on a computer

For privacy and security reasons, video files are not stored on the SD card of the camera. It needs to be decoded with CloudEdge App to view the record. You can also click the record button when viewing the record on App, save the record in MP4 format to the mobile phone, and then copy the MP4 file to the computer. 

C10/C10-TZ, We have had our cameras installed for only 1 week ( 7 days) and the batterys are almost dead.

The battery life of the camera depends on the environment in which the camera is placed. If the camera is often waked up, the camera will always be in the record state. Just like your mobile phone has been recording video, the battery power consumption will be very fast.

In an ordinary family, the camera is waked up 10 times a day, usually for two to three months. You can also buy our solar panels, so you don’t need to worry about charging any more.

For solar panels, you can search for B07S61RXL5 on Amazon. Before buying, please contact us to request for a 15% discount.

CloudEdge Cloud Service Fee Standard

If you open it for the first time, you can also enjoy seven days of free cloud storage. This camera will only start recording when it detects a human body. 

C10/C10-TZ, Share device with more people

This function can allow your family members to access your camera. Each camera only can be added to one account, they need to download the CloudEdge App then register an account before sharing the device.

1) Tap the shortcut settings button > Device Share > Add > Scan QR Code 

Open your family’s APP, show your family’s QR-Code, and scan it. Share the camera with your family. You can set two Device Usage Permissions, One is View only means your family or friends can view the device, but cannot control the device; and the other is Allow control means your family or friends can view the device information and control the device

2) Tap the shortcut settings button > Device Share> Add> enter

account. Put in your family’s App account> Search> share your device. You can set two Device Usage Permissions, one is View only means your family or friends can view the device, but cannot control the device; and the other is Allow control means your family or friends can view the device information and control the device

C10/C10-TZ, Charge the Camera / Battery Management

When you charge the camera, there is no indicator on the camera. You can check the battery status on App.

The video quality when viewing transaction or alerts is not good.

You can set the video mode to HD mode.

.

C10 video saved in mobile phone

Click History- Record -Album.The video is saved in the phone memory.

Turn off the floodlights

1. You can choose to turn off the floodlights

2. Click on Full color mode,then choose black and white night vision,

The default black and white images at night,the device do not turn on the warm lights.

<p>The post Hiseeu CloudEdge Battery Powered Camera Guide first appeared on NVR IPCAMERA SECURITY.</p>

O-KAM Pro APP Download

O-KAM Pro supports Android and iPhone, you can download it from google play or app store.

Login O-KAM Pro

You need to register and login to O-KAM Pro APP to connect the camera, click Register now or email icon to register.

It is recommended to allow all permissions of the APP, otherwise you may not be able to use and connect the O-KAM Pro camera properly.

Read Next : How To SetUp JXLCAM Camera

Connect O-KAM Pro Camera To Wifi

This connection mode supports O-KAM Pro wifi camera and battery camera.

1. Connect the O-KAM Pro Camera to a power source, and if it is a battery camera, press and hold the power button to start the camera.

2. Click + , then scan the QR code on the O-KAM Pro camera, the APP will automatically enter the appropriate connection mode.