Uniview’s Facial Recogition / Monitoring feature can only be used with a Smart Bar and EPB recorder
Download both firmware for your recorder and latest recognition firmware for your smart bar here : https://securitysystemdepot.com/pages/support-uniview-firmware
Upgrade your NVR and your smart bar through your NVR’s maintenance interface

Step 1 – Enable monitoring on your recorder

To enable monitoring, go to Smart -> Monitoring -> Add Monitoring Task on your browser

Step 2 – Select a camera to monitor

While adding a monioting task, enable, adjust the sensitivity to your needs, and save

Step 3 – Enable recogniton on your camera

3a – Go to Setup -> VCA -> Face Detection
3b – Select your camera, and enable both Face Recognition and Face Shot
3c – Change your Recognition Mode to NVR Recognition
3d – Select either Full Screen as a detection area, or specify your own area right below it
3e – Adjust your sensitivity and save

Step 4 – Setting up the faces to recognize

Perform these steps after giving your recorder time to accumulate faces to its’ database

Step 5 – How to search for a matching face

<p>The post Uniview How to configure Face Recognition first appeared on NVR IPCAMERA SECURITY.</p>

This article describes the process of setting up the UniFi Protect Controller on a UniFi Protect Network Video Recorder and connecting cameras to it.

Before you begin

To set up the UniFi Protect Controller, you will need either a UniFi Network Video Recorder (UNVR), or a UniFi Dream Machine Pro (UDM-Pro), or a UniFi Cloud Key Plus (UCK-G2-PLUS).

Before you begin with the Controller setup, make sure that:

• One or more compatible, surveillance grade HDDs are inserted into the UNVR
• Your UNVR and Protect cameras are set up according to their respective Quick Start Guide

Set up the UniFi Network Video Recorder

Note: For the purposes of this guide, the setup process for a UNVR is shown; however, the setup process for other Protect devices will be identical.

You can set up the UNVR on the UniFi Protect mobile app, or on the web UI. If you haven’t set up your UNVR yet, watch the video or follow the written steps below before you set up the UniFi Protect Controller.

If you’ve already set up your UNVR, go to the next section of this article.

Set up the UNVR using the web UI

1. Access the startup wizard via the UNVR’s IP address.

Use the UniFi Wifiman app’s (iOS / Android) Discovery feature to locate the device’s IP address. Enter the IP address in your browser (Google Chrome is recommended).

2. Name your UNVR and log into your UI.com account, or create a new one.

3. Specify the update schedule and confirm whether you would like to submit your device’s diagnostic and performance information.

4. Review the changes and click Finish to finalize the setup process.

Once the device has been updated to the latest firmware version, you will be redirected to the Protect Controller’s home screen.

Set up the UniFi Protect Controller

To set up the UniFi Protect Controller:

1. Update the UniFi Protect application to the latest controller software version:
   1. Access the UniFi OS settings via unifi.ui.com and go to Settings > Updates.
   2. Click Check for Update and click Update if there is a new version available.

2. Wait for the controller to complete HDD formatting and RAID array forming. Raid formatting is the process in which your HDDs are split logically to prepare for redundant data distribution. If a specific partition or the entire HDD fails, its data will still be recoverable since it’s been distributed across other hard drives.

Note: This process might take some time. You will see the process status in the Protect controller host device settings within the General section. For more information on hard drive formatting, see UniFi – Hard drive compatibility and management.

Once you’ve set up your Protect Controller, you can access its dashboard by clicking the Protect icon on the UNVR’s home screen.

Use the UniFi Protect Controller

After completing the controller setup process, you can proceed with adopting the Protect devices and managing your controller.

For more guidance on these tasks, see these articles:

• UniFi Protect – Adopt devices
• UniFi Protect – Manage devices
• UniFi Protect – Use UniFi Protect

Frequently asked questions

Can I install the UniFi Protect Controller on Windows, Linux, or macOS?

No, UniFi Protect is designed with the best software and hardware integration in mind; therefore the controller can’t be installed independently.

<p>The post Set up UniFi Protect Models first appeared on NVR IPCAMERA SECURITY.</p>