Safety Caution

All PRODUCTS & PARTSThis product may require cabling,we suggest to test all products&parts before installation and cabling×Dismiss this alert.

Nvr product description

1.  WIFI Antenna Ports:Double antennas to WIFI range

2. WAN Port:Connect your NVR to Internet

3. VGA Port:For viewing on VGA monitor

4. HDMI Port:For viewing on HDTV

5. USB Ports:For mouse and backup

6. Power Input

IP Cameras product description

①. WiFi antenna:WiFi connection with NVR；
②. DC Port:input power 12V 1A;
③. Reset Button:press reset button for 10 seconds to restore factory setting and enter into matching-code mode;
④. RJ45 Port:for pair the camera with NVR,or connect the camera by wired connection

Note:Working temperature ranging from -13 degrees Fahrenheit to 122 degrees Fahrenheit.

Installation Instruction of WIFI NVR KIT

EseeCloud Wireless Security Camera System Installation

Read More : Wi-Fi NVR Kits User Manual

Note:The NVR can work with the router by wireless connection and wired connection Wired connection: when your NVR connect by RJ45 to your router,it will get network settings automatically Wireless connection: right click your NVR mouse and choose System Setup→Network Setup→Wireless Internet→Enable the Wireless LAN→find your own wifi network,and put wifi password here (pls notes it doesn’t work with 5G WIFI network)×Dismiss this alert.

Setup The System

This system is standalone with embedded Linux Operating System in the NVR. Just like a desktop PC, need to hook a screen to the NVR to enter the OS .Any TV,monitor with VGA or HDMI input should work for it.

If you connect the NVR with monitor shows Hiseeu logo or shows black,normally it is your monitor resolution is lower then the NVR.You can press the left side of the mouse for 30s,then it will reboot.

If still can’t work,pls change a monitor,thanks.

When you turn on the NVR box, the monitor will get below interface: Setup Wizard- -Down- -General setup- -Next -wireless setup- -Next- -Fast network- -Next -Format the hard drive- -Next

CHECK NVR NETWORK , CHANGE NVR SYSTEM LOGIN PASSWORD

Once you have completed connecting the NVR,wait approximately 2-3 minutes.Next you will see the window below on your monitor screen.For your first time to login in,User name is admin,there is no password,just choose ok to get into the menu.
(if you forget the password,pls find the solution on the FAQ page)

Tips: To protect your privacy,please set your password at earliest convenience(don’t set the password over 8 characters).Right click the mouse→System Setup→System Admin→User to set password.

How to check if your Cloud is online and Network status is healthy ?

Right click the mouse of the register,choose Fast Network.In the middle of the window you should see Cloud status as ONLINE and Network Status as Healthy Network.

If this does not appear, select Manual Config then enable DHCP,Click Apply,then power off the NVR box,wait a few seconds and power up.

Once you power up, repeat the steps outlined as above.Cloud status must be ONLINE and Network Status must be Healthy Network.If this does not happen,you will not be able to view remotely

Menu Do What

Menu bar

Split Screen: change status of live view.You can choose to view multiple cameras or any single camera.

Video Manage: manage IP cameras and NVR channels.

System Setup: all system settings.

Video Playback: playback recorded videos.

Video Backup: backup recorded videos.

Color Adjust: adjust the image setting of the each camera

PTZ Control: control PTZ camera

Volume: Adjust volume of audio cameras(works only for audio cameras).

Setup Wizard: step by step guide of 1st time general settings.

Fast Network: shortcut to network settings.

Wireless Add: add IP cameras into NVR channels wirelessly.

Exit System: logout,reboot,close screen output and shut down the system.

System Setup

Click right button→Choose System setup; enter the menu that enables you to do all settings related to this system.

Menu Do What

There are 3 modes for reocrd.

Note: Users can setup any period of time they want,for example 0:00:00-23:59:59,That’s 24 hours×7days recording.When NVR detects hard disk,the default setting will be 24 hours×7 days recording.

The priority of Alarm is higher than that of Motion,and the priority of Motion is higher than that of Time.

Video Playback

Steps: right clik mouse in main menu→Video playback→choose date,channel,record mode→click search→then can view playback file.(IE browser can’t check the playback directly,so you can use the Eseecloud software on computer or check on your phone app Eseecloud and IP RPO)

Warm prompt:

1.IIIustration for playback button: play, pause, fast forward×2,×4,×8

2.Play file:Choose the recording file in file list,as number “1” shown in picture.Choose one of the recording,click “play” to play to recording file;

3.Video backup:Choose the recording file in file list,as number “1” shown in picture.Insert the U flash disk,click “video backup” to backup the file;

4.Timeline: Click “date”and “time”at left bottom to check the timeline of recording,as number “2″ shown in picture;

5.On the timeline with recording file,left click the mouse,the can playback the file.

Notes: you can see four channel cameras playback at the same time,if you want to check other channels you need select the correct channel at first,then choose search to find it playback.

How to Backup the video

Use U disk to copy video,so easy and convenient!

The playback files is avi. format, you can use VLC player to check it on your computer VLC player.
download link: https://www.videolan.org

View on PC via lE or Eseecloud and Phone APP Eseecloud or IP PRO

To View on the the PC

To view on browser,you have to connect the NVR and your computer to the same router.Enter the IP address of NVR on the browser’s address bar.(We recommend using IE or Micorosoft Edge) Right click the mouse→system setup→Network Setup→IP address (Start with 192.168… )
You can change language on the right top corner.

To view on Eseecloud software on PC

Input Cloud ID (Right click the mouse→fast network→Cloud ID)
Input User Name and Password (If you doesn’t change the user name and password,User Name is admin ,no password)
please download Eseecloud software from： https://ipproapp.com/computer
user name is admin,no password,choose login

*Select “Add”
*Select “Cloud ID”.enter the cloud ID(9 or 10 numbers).You can find it on your home monitor screen.
Or right click the mouse, choose Fast network find cloud ID here
* Username is NVR system user name on your home monitor screen
* Password is your NVR system password on your home monitor screen.(If you don’t change It in your setup,it should be no password)
* Channels: Input 4 or 6 or 8. If you have 4 cameras,enter 4 etc.
* Click Confirm and you will see the video.

if you check in the local network,you can use the NVR IP address to add the system (Find the IP address on Fast network page or Network setting page)

To View on IE browser

Find the IP address: right click your mouse and choose Fast network, you will see the IP address here.
Enter the NVR’s IP address in your IE browser for example: http://192.168.1.105(If the default WEB port 80 has been changed e.g. to 100,you need to add new port number when input IP address in the browser,for example: http://192.168.1.105:100).

To view on the Phone

Users can use cellphone to scan the QR code below to install the APP free of charge,or users can search “Eseecloud”or ’IP PRO‘ on APP store or Google Play then install the APP.

Click “+”→other ways to add/ scan the QR code on your fast network page→Network connected device→input Cloud ID and User name and password (user name and password is the same one you login in NVR)

Tips: if you’ve set a password on your NVR system,please update your password on APP to view.
And if your camera loading for a long time and don’t show image,you can right click your NVR mouse and choose System Setup→Network setup,change the MTU to 1000.

Playback On Mobiles

In the Eseecloud APP,while viewing live video of the system,click Playback,you will enter the remote playback menu.The APP Playback only check one channel at one time

Tips: Videos in playback are HD mode for real time which requires very good transmission condition.
We suggest to playback in LAN.Remote playback out of LAN may not 100% work due to connection & network condition.

Extend WIFI Range

Wireless connection is easy and convenient, but it’s not universal application. Because of the character of WIFI, the WIFI signal will decrease when going through some obstacles Some methods can be applied to bypass obstacles and extend WiFi range.

Position The Antenna Correctly

WIFI range is like an apple and the antenna of NVR is in the center of it.WIFI signal is strong all around the WIFI range.Antenna of NVR should be put straight up,if not,WIFI signal will be weak.
According to the signal transmission character of antenna, the antenna of cameras should overlap or parallel to NVR WIFI range,as pictures showed below:

Use Antenna Extension Cord to prolong WIFI distance

Installation method of antenna extension cord

Note:When WIFI signal is not strong enough against walls,users can take off the original antenna and subtitute antenna extension cord.Drill a hole on the wall to let the extension cord go through and simply it where WIFI signal is strong.

Set up cascading connection in a reasonable solution,extend wifi signal transfer distance

Note:
Repeater function can’t strengthen WIFI signal for wireless NVR kit, but can extend the distance by repeaters→WIFI cameras.

Only when the repeater cameras and repeated cameras are positioned correctly,WIFI distance will be extended.

Repeater function and 3 meters antenna extension cord are two methods to extend WIFI range.
Users can choose one according to real situation.

Repeater Setup

Step 1. Right click the NVR mouse,and choose “Video Manage”- -then left click Repeater”

Step 2. Add repeater
As picture shown below,click icon + besides channel 3,choose other channel.

Step 3. As picture shown below, it means IPC1 is connected to NVR through IPC2 and IPC3.
IPC2 is connected to NVR through IPC3.IPC3 is connected to NVR directly.

Step 4. Click “Apply” and then click “refresh” to check if the setting is successful.

Delete Repeater

Move the mouse to targeted channels,left click to delete,and then click “Apply” and “OK”.

Application Example

As picture shown above, when IPCAM1 is put somewhere is out of NVR WIFI range,and there is IPCAM2 between them with strong WIFI signal,users can put IPCAM1 close to NVR and power it, setup IPCAM1 repeated by IPCAM2, and then install IPCAM1 to the presupposed place.

Camera add failure reasons and solutions

Q1: Failed to add the camera for the first time

Check whether the green light of the camera flashes normally. If the camera status light is not flashing green, use a thimble to lightly insert the configuration hole or long press the reset button until the camera indicator flashes.

Q2: Determine whether the binding failure caused by the router settings

1. The router has been set up to prevent Wi-fi squatter If the Wi-Fi connected to the camera is set to prevent Wi-fi squatter(black and white lists, MAC address filtering, etc.), the camera will not be able to connect to the Internet. The router’s prevent Wi-fi squatter settings need to be canceled.

2. The router is set up with 5GHz band wireless WiFi The camera does not currently support the connection of 5G band WiFi. Please open the router management page (generally marked with the address of the management page on the bottom label of the router), select the wireless setting 2.4GHz, and set it to on.

Q3: Check whether the mobile phone prohibit the permission of  EseeCloud to use data, WLAN, GPS

Domestic Android phones may prohibit the use of data, WLAN, GPS permissions for this application, resulting in the camera being unable to connect to WiFi. Solution (Android phone): Open the phone settings center-click “application management”-open the above permissions

Q4: Make sure that the WilFi account and password are filled in correctly

It is likely that the Wi-Fi account and password you connected to the camera are incorrect, resulting in the camera not being able to connect to the network. In particular, pay attention to whether there is a space input, and try to avoid complex and uncommon symbols.

Q5: Other questions

1. If the router is set to bridge mode, the WiFi signal will be unstable, causing the connection to fail. It is not recommended to use WiFi in bridge mode when the camera is networked.

2. If you are a campus / enterprise user and the school 1 company assigns each student / employee a static IP to access the Internet, you can manually enter the static IP information to access the Internet.At present, this situation is not supported by camera networking, need to select other available WiFi connections.

3. The camera does not support WPA / WPA2’s “enterprise” encryption method to connect the camera to the network. Support WEP, WPA–PSK 1 WPA2–PSK, or corporate WiFi without password. If the camera is networked in the corporate network environment, please confirm in advance whether the WiFi encryption method meets the camera networking requirements.

What should do if the camera is offline?

Q1: Camera offline processing method

1. Check whether your device is power-on and the status light is on;
2. If you are using WIFI connection, please confirm whether you have modified the WIFI in the environment where the device is located-including the WIFI password and name, if modified, please reconfigure WIFl;
3. If the reason cannot be resolved, please restore the factory settings and add the network again.

Device preview help

Different devices support different functions. Preview interface only shows the functions supported.

Light control:setup on/off,brightness,color temperature for light control device

Screenshot:snapshot current preview image

Recording: record current preview video

Full screen:tap button and switch to landscape viewing

Calendar:choose playback time to show all recording files wanted

Remote playback: device must to be inserted TF card.

Two way talk:press the button and talk for a long time

Installation mode:swith to wall installation and ceiling installation mode

Display mode: at ceiling installation mode,there have fisheye mode,cylinder mode,corridor mode and fulI screen mode

Cruise: setup auto cruise .

Sound:setup the sound on/off

Swith code stream:switch HD and SD

Split screen dispaly: choose screen channel number

Screen aspect ratio: can set the screen aspect ratio

PTZ control: control the movement of high speed dome

Timeline:drag the time line left and right to choose recording period . Use fingers to zoom in or zoom out the timeline

Add Camera

Add device

Method 1: Enter to device list interface after login, click the t’ button in the upper right corner of the interface, and select the add device” button.
Method 2: Click the’+’ button in the interface to enter directly to add device interface.

add camera

1. There is a QR code on the device body:
Scan the QR code on the device,display the device ID of the current device , click the Add ICON below jump to the prompt interface of operation guide.

add cameraadd cameraadd camera

2. Can’t find the device QR code :
lf there is no QR code on the device, click ‘Other ways to add’ and then select ‘Standalone camera’.

add cameraadd cameraadd camera

3. Please connect your mobile WiFi to the device hotspot.

Open Settings-> Select Wireless LAN > Select ‘IPCXXXXXXXXX’ device hotspot.

Connect hotspot,default password：11111111

add camera

4. After connecting successfully,return to APP.

Remote View: View video via WIFI or other network, please select Remote View.(most people choose)
Direct Connection: View video without network ,select Direct Connection. (few people choose)

5. Select Remote View to continue.
Select your wifi and enter your wifi password, then click Confirm .

add camera

add camera

6. Configuring, do not unplug the network! The network configuration process may take 1-2 minutes, please be patient.

add camera

7. Set device name and device password.
For added security, please set a password.

add cameraadd cameraadd cameraadd camera

Device Sharing
Generate shared QR codes ln the device list, click the “Share” button, set the right to share, choose to share, and generate QR codes.

Device SharingDevice SharingDevice Sharing

Scan and share QR code.
click on the’+’button in the upper right corner of the interface to enter to add device interface, click on scan add device, enter to scan interface, scan shared device QR code, after display the scan results then return to device list interface.
Note: You need to allow access to the camera and album to use this function properly.

Scan and share QR codeScan and share QR code

App Operation

Log in

This APP support “account log-in”, third-party log-in” and local experience”.
Account log-in: At log-in interface, input user name/cellphone number/email address and password, click ‘0K” and log in.
Third-party log-in: Click the icon of third-party network social software, authorize the APP to log in.Local experience: Users can use the APP without log-in.
Remember the password: Supportremem-berring the account and password that have been logged in, which is convenient for switching account login.
Note: Please pay attention thatLocal experience” mode will be stored at local.Once data is lost, it can’t be restored.

IP PRO Log in

Registration

Input cellphone number/email address to register, get verification code.
Input verification code and password, click “OK”. After registration it will move to device list.
Note: Each cellphone number/ email address can be used for registration once.

IP PRO RegistrationIP PRO Registration

Reset Password

Input registered cellphone number /email address to get verification code. Input verification code, reset password and click “OK”.
Then go back to log-in interface, log in with new password.

IP PRO Reset Password

Frequently Asked Questions

Question one：After installation, open the CMS and display “Cannot load plugin”?

Answer one：

1.Please confirm whether the installation path uses Chinese when installing, and the plugin is temporarily not compatible with Chinese path.

2.After confirming the non-Chinese path, if the problem persists, you can contact technical support for assistance.

Question two：After connecting multiple channels of video (more than 30 channels), videos stop for a few seconds , all channels are automatically disconnected into the black screen. The device connected again has no response. Do we need to restart the CMS?

Answer two：The new version of CMS3.0.1 runs with higher memory. If you connect many channels by the lower configuration computer, the computer system will run out of memory, causing the CMS to run abnormally. If the computer configuration is slightly lower, it is recommended not to connect too many channels. The optimization work has been planned for this situation.

Question three：When CMS is installed on the OSX system, it displays “File is corrupted” or “Unable to open” when it is opened?

Answer three：

1.Open “System Settings” → “Security and Privacy” → “Allow applications to be downloaded in the following location”, check “any source” (applies to versions prior to OSX10.12.X);

2.Open “Terminal”, enter the string “sudo spctl –master-disable”, press the “Enter” key, enter the sudo password (applicable to versions after OSX10.12.X). If the above method still does not work, please contact us to help you solve it.

Question four：After starting a window and flashing, it will not start or XP will appear. Open the software to indicate 0a00000000 memory referenced by 0x00000000 instruction. The memory cannot be ‘written’.

Answer four：Large probability video card driver problem, update the graphics card driver can solve

Question five：It shows  mfc100u.dll lost when opening computer

Answer five：Install VC++2010 library to solve the problem

More features

User Management

New user：①Click New User ②Enter username (required) + note name (optional)③Click to confirm

Modify permissions：

Default: The default permissions include screenshot, video, PTZ settings, video playback, remote download 5 items

modify：①Click edit permission ②Check the permissions and devices/channels that need to be assigned to new users (you can click to select all) ③Click to confirm

Other functions：

        ①Clear password: If the login password of the new user is forgotten, you can log in to the newly created user again by directly clearing the password and the internal setting data can be retained.

        ②Modify the note: Add a note, change the note or delete the note, go to the modify note operation

        ③Delete user: If you feel that the newly created user is not necessary, click delete user to delete the user.

New userModify permissionsModify user

Log query

Inquire：①Confirm ‘start time + end time’②Confirm ‘log type’ (including: alarm log, login log, operation log)③Selected area ④Click to query

Log query 

Resource management

Screenshot：

search for：①Select ‘start time+end time’ ②Click search

Preview：①Method one selects ‘preview’ for right-click operation ②The second method is the screenshot file retrieved by direct click.

delete：①Method 1 Select ‘Delete’ for the right-click operation. ②The second method is to enter the screenshot preview state and click to select ‘delete’.

location：①Method 1 Select ‘Open location’ for right-click operation②Method 2 is to click ‘Save Location’ in the resource information.

Resource information：‘user, resource size, resolution, device name, associated channel, screenshot time, save location’, including the above content (as shown in Figure 2)

Replacement size：‘Original size, maximize, zoom in, zoom out, resource information, delete’, the screenshot preview status includes the above status/function that can be switched to

video：

search for：①Select ‘start time+end time+’②Select the recording type (including: preview video, playback video, default all types)③Click search

Resource information：‘user, resource size, recording type, device name, associated channel, recording time, save location’, including the above

Other functions：The operation steps of ‘preview, resource information, location, delete’ function are the same as the screenshots. For details, please refer to the operation in the screenshot.

Right click operationResource information

System Info

Version Information：The content is displayed as follows ‘version number, date’

change Password：①Enter ‘original password + new password + confirm new password’②Click to confirm ③Re-login verification password

sign out：Click the ‘Exit Login’ button to quit the login status of the current account.

System Info

User parameter

Basic Settings

Split screen number：The selected split screen number is displayed after the re-login, and the CMS provides split screen 1/4/6/8/9/16/25/36/49 nine forms of choice.

Display language：CMS currently defaults to 9 display languages, such as Simplified Chinese and English. When you choose to log in again, you will switch to the corresponding language.

Login Method：The cloud login mode is online. You need to connect to the external network when you log in. The local login does not have this hard requirement.

List style：The list style includes tree shape and graphics. The replacement is only the real-time preview interface and the display of the device list under the playback interface. The device list under other interfaces is unified into the tree list style.

Path modification：

①Screenshot path: The screenshot file is saved in the snapshot folder by default, and can be saved in other paths according to its own needs.

②Local recording path: The local recording file is saved in the record folder by default, and can be saved in other paths according to its own needs.

③Video download path: The files downloaded by the playback video are saved in the video_download folder by default, and can be saved in other paths according to their needs.

Preview sync time：Check the time when the device is previewed and the computer will be automatically synchronized (only ipc is supported)

note：After modifying the settings, click “Finish” and you will need to log in again. (It is best not to modify it to a directory containing Chinese)

advanced settings

Time zone setting：The local time zone can be selected according to the actual situation.

Automatic lock：Check the auto lock and enter the integer in minutes in the time frame. If no operation is performed on the CMS within the time of the input, the CMS will automatically lock.

Automatically connect video：After logging in to the auto-connect video, log in to the CMS and automatically connect to the device added to the device list. The number of connected channels is the number of split screens in the basic settings.

Basic Settingsadvanced settings

Equipment management

Add device

Add a LAN device：①Enter the device management interface ②Refresh LAN device ③Check the device and click Add (LAN device can be filtered by entering IP/ID in the filter box)

Add cloud ID device：Manually enter the device ‘cloud ID number + channel number’, select ‘type’ according to the actual situation of the device, and the rest can click to confirm (the password can be selected according to the actual settings of the device)

Add an IP/DDNS device：Manually enter the device ‘IP/DDNS+port+channel number’, select ‘type’ according to the actual situation of the device, and the rest can click OK.

LAN add

Modify device

Device modification：In the device management or preview interface, after selecting the device and clicking Modify, the device interface will be loaded.

Regional modification：In the modify device interface, click the area drop-down box.

Group modification：After selecting the group under the device management interface, click the modify button to load the modified group information interface.

note：Modify the channel name, panorama, and channel type corresponding to the channel number in the device.

The panorama or channel type corresponding to each serial number is independent.

The channel device in the device needs to be in the panoramic state. You can select the corresponding channel serial number to modify the panorama. And channel type

Device modificationGrouping

Remote setting

VR CAM/gateway Remote setting

Setup steps：①Selected device ②Click Settings / Connect Device and click the Remote Settings button (as shown in Figure 1)

Device Information：Content includes device model, device ID, OEM serial number, firmware version (providing check updates)

Function setting：The audio, prompt tone, prompt language, and display mode and resolution can be set on the configuration.

Alarm system：The content includes motion detection, message push, motion detection sensitivity, and synchronization time function. If daylight saving time setting is available, you can set daylight saving time.

TF card settings：TF card status, available / total capacity, TF card formatting function

note：

①Alarm message push is not supported in local login. You need to check to switch to cloud login status.

②Currently supports VR CAM/gateway devices for remote setup

Remote setting interface

D82 series NVR remote setting

Setup steps：①Selected device ②Click Settings / Connect Device and click the Remote Settings button

Device grouping

Create a group：①Click the ‘Create Group’ button ②‘Enter the content in the group name box and click OK.

Add channel：

enter：①Select the created group ②Click the Add Channel button

Import selection：①Selected channel ②Selected group ③Click the import selection button

Import all：①Selected group ②Click to import all buttons

Modify/delete：

Edit: Select the group and click the Modify button to modify it.

Delete: delete the selected group or channel and click the delete button to delete

Create a groupAdd channelModify group

Video playback

Video playback

Playback four steps：①Select device channel ②Select video type ③Select playback date ④Confirm search video

Device channelVideo typeDate selection

Timed playback

Timed playbackTimeline

Video sync

Steps：①Retrieve video  ②Check sync  ③Switching time point

Video download

Batch download：Enter the time period to be downloaded at the start time + end time according to the needs of the retrieved recording time range.

Time period download：The time period of the video recording will also be displayed in the download resource. Click the download button for any time period according to your needs.

Custom bulk downloadSelect time period to download

Other functions

Playback control：Support playback/pause/stop control in video playback, select the screen form in playback and click operation

Time scale adjustment：The settings in the Setup Wizard are not set. The playback timeline scale will default to 60 minutes. You can also modify the scale value by clicking ‘Reduction’ or ‘Magnify’ during video playback.

Playback controlAdjustment scale

Live Preview

Connection/Disconnection

The list style is treeshape:

connection：

①Double-click on the selected device/channel to enter the connected video state.

②After selecting the device/channel, right click and select “Connect Video” to enter the connected video state (Figure 1)

disconnect：

③Double-click to disconnect the current connection after selecting the connected device/channel

④After selecting the device/channel, right click and select ‘Disconnect’ to disconnect the current connection.

Figure 1

List style is graphic：

①After selecting the device/channel, click the play button on the device list to enter the connected video status.

②After selecting the device/channel, click the stop button on the device list to disconnect the current connection status.

③Right-click operation connection/disconnection is consistent with the tree list style. The specific operation can be referenced.

Note：poor performance of the computer will directly affect the smoothness of the preview video. It is recommended that the number of channels connected to the device be gradually increased

Video/screenshot

Video：

①Click the Record button on the toolbar to enter the video recording status (as shown in Figure 1 below)

②After the video operation, click the record button again to stop recording.

Note：

①The actual recording duration is not equal to the time difference between the start recording time and the end recording time.

②If the device network is interrupted, the recording will succeed but no video file will be saved.

③The channel is maximized or minimized during recording, and the recording will stop.

Screenshot：

Click the screenshot button on the toolbar to enter the screenshot status (as shown in Figure 1 below)

Note：

①If the switching stream video is not loaded, the screenshot operation will be saved.

②The screenshot does not have the function of continuous screenshots. Clicking the screenshot button once will capture an image.

Figure 1

Panorama mode

enter：

①Double-click the channel screen to enter the maximized state, right click and select “panoramic mode” to switch to the panorama mode, enter the panorama, and the code stream is automatically switched to HD.

②The channel screen is in 1 split screen mode, and the panorama mode option is available on the right toolbar. Click to select to switch the panorama mode.

drop out：

①Click on Panorama mode on the right toolbar and select ‘Exit panorama’ to exit panorama mode

②Exit the panorama mode by exiting the screen from the split screen state.

Panorama modeCylindrical modeExpand modeSplit screen modeQuad screen modeSix-screen mode

Note：

①In the local login mode, you can select 6 display modes in the panorama mode, including: panorama, cylinder, expand, 2 split screen, 4 split screen, 6 split screen

②In the cloud login mode, you can select 4 display modes in the panorama mode, including: panorama, cylinder, split screen, quad screen

        Suspension: the direction of the cruise is clockwise

        Wall-mounted: the direction of the cruise swings left and right

       Speed: Cruise provides speed 3S / speed 40S / speed 60S three options, corresponding to slow / medium / fast three speeds

       Stop: Pause the current state of the cruise, left click on the channel in the cruise or select the stop cruise button in the cruise mode to click

Panorama modeInstallation modeCruise mode

PTZ control

Cruise / PTZ / Zoom / Focus / Aperture / Preset：

The PTZ control function can be used only when the PTZ device (such as a ball machine) is connected to the main control device (such as NVR or DVR).

Cruise is to directly perform the screen cruise operation. The pan/tilt is to adjust the lens direction and zoom to replace the mirror multiple.

PTZ speed level controlcontrolZoom, focusPreset

①：Adjust the PTZ control speed (default level is 6)

②：Adjust lens direction and cruise

③：Adjust the zoom and focus of the PTZ camera

④：Set and call the set bit, adjust the lens to the specified position, set the preset position, input the preset position later, click to call, the lens will automatically move to the specified position

Split screen number

When the number of connected device channels is greater than the current number of split screens, the displayed split screen will automatically increase, reaching 49 split screens.

Split screen number

Other functions

Other functionsIntercom

User login

Local login

①Enter account + password  ②Click to login

Login accountforget password

note:

Cloud login

Note:

①The cloud login should be logged in with the registered account (the account registered by the mobile app can be logged in)

②Registered account is recommended to use a valid mailbox, easy to retrieve passwords and other special circumstances

③After registering an account, you need to log in to the email address you entered during registration to activate the email address (click the received link to verify)

④The mailbox status is not activated, and cannot be retrieved after forgetting the password (activation period is two days)

⑤The first time you use EseeCloud_CMS, the software’s time zone will automatically sync with your computer, and you can change it later in the advanced settings.

Login accountRegister a new accountRetrieve password

Installation login

Installation and operation

Step 1: Run the EseeCloud_Setup_3.0.1.exe installation package

Step 2: Select the display language when installing

Step 3: Read and determine whether to accept the agreement

Step 4: Determine the path to the installation

Step 5: Installation is complete and you can choose to run immediately

1. Running program2. Choose a language3. Reading agreement4. Determine the path5. The installation is complete

Introduction to EseeCloud CMS

Function introduction

CMS is called Camera Monitor System. It is a camera monitoring client for online preview image, video storage, remote playback, device management, video/screen download and other functions. 

It is suitable for DVR, NVR, IPC, VR CAM, Wifi IPC and other devices.

Camera suitable for IP PRO, VR CAM, EseeCloud app.

CMS has the following characteristics

 Interface containerization processing mode: In the interface design of the client component, the containerized processing is carefully adopted, which simplifies the processing mode of multi-screen and single-screen switching, greatly improves the multi-screen operation feeling, and adapts to the development trend of a multi-screen PC.
.

Channelized management mode: In the client component design, channelized management mode is added, and the traditional design mode with device as the core subject is abandoned, which is more suitable for the development direction of IP monitoring.

Operating environment

Operating system:Microsoft Windows7 / Windows 8 / Windows 10 (32/64 bit Chinese and English operating system)

OSX 10.9 or higher (64-bit Chinese and English systems)

CPU：I3/2.4GHZ or more

Memory: 4GB or more

Graphics card: integrated graphics (Intel HD 4000 and later), discrete graphics (NVIDIA GeForce GTX 460 and later)

note

Preview multiple video or high resolution video at the same time, requiring higher hardware configuration and network bandwidth

Foreword

Foreword

Welcome to use our products! We are very honored to get your trust.

In order to have a general understanding of our product CMS and facilitate your use, we have specially configured this manual for you, including the function introduction, operation steps, precautions, etc., which are essential guides for your use of this product.

Please read the instruction manual carefully before use. I believe it will be of great help to your effective use of this product. In addition, if you have any questions during the use, please feel free to contact us, we will be happy to serve you.

Applicable Model

This manual is for the camera monitoring system CMS.

Statement

This manual may contain areas where the product functions or operations do not match, or where the technology is inaccurate, or a typographical error. For such problems, our company will update the manual content according to product updates, and regularly update the hardware and software products described in this manual. The updated content will be added to the new version of this manual without prior notice.

The contents of this manual are for reference guidance only, and are not guaranteed to be identical to the actual product. Please refer to the actual product.
.

Agreement 

In order to simplify the description in this manual, make a convention:

The camera monitoring system CMS is referred to as CMS or software for short;

DVR, NVR, IPC, VR CAM, WIFI IPC equipment, etc., collectively referred to as equipment;

Click for the left mouse button click, double click for the left mouse button to double click;

Some pictures are schematic, please refer to the actual interface of the software;

A “note” hint text may appear in this article to indicate that the operation is potentially risky, and ignoring the text may result in errors or unpredictable results.

Cloud storage details

Features

1. What is cloud storage? The cloud storage function is a video storage function developed based on technologies such as moving object detection. Cloud storage is divided into two types: alarm recording and full-day recording. Alarm recording refers to triggering the camera alarm when someone passes by or moves in front of the camera. The camera will automatically record and upload it to the Cloud Space Security Center for encryption. You can use it with confidence.  

 Tips:  

 (1) As long as you purchase the cloud storage service, you can get the corresponding cloud space. For example, if you purchase the cloud deposit monthly package, the cloud space is valid for one month, and it will take effect from the successful purchase. 

(2) The storage time of cloud storage video is determined by the type of package. If you open the cloud storage package for 7 days, the camera cloud video storage period is 7 days. The 30-day cloud storage package will be opened, and the camera cloud video storage cycle will be upgraded to 30 days. If you open a 7G/month cloud storage package, then your cloud recording storage space is 7G in this month. After the space is full, the cloud recording will not be saved. The stored video will be saved for one month.  

 2. What are the advantages of cloud storage? The video is safer: the video cloud storage can not steal, safe and reliable. More efficient viewing: generate alarm video in real time, quickly grasp the alarm situation, the video is clear and smooth without jamming Cloud storage: Camera video is stored in cloud space, no space limit, and unlimited cloud storage space.

Cloud deposit purchase and exchange

1. How to buy a cloud storage package?
Click the device list device “Cloud Record” button or the personal center “Cloud Mall” – enter the “Cloud Mall” interface – click “Switch” to select the device you want to purchase and the device channel – automatically select the appropriate package for you after the selection is completed – click ” Buy now” Once the payment is complete, you can turn on device cloud storage.
Tips:
(1) Cloud deposit does not support return and exchange after purchase, and does not support refund;
(2) The purchase channel of the device is determined by the number of package service channels of the system. If the system has only two packages with service channels 1 and 3, then the device can only select 1 or 3 purchase channels;
(3) Cloud storage is only bound to the purchase user. The device with the cloud storage is deleted and added to the new account. Under the new account, the device will not be able to continue to enjoy the cloud storage;
(4) Cloud storage is purchased by a single device and device channel, and multiple devices and multiple channels need to correspond to multiple cloud storage packages;

2. How to redeem the cloud storage package?
Click the device list device “Cloud Record” button or the personal center “Cloud Mall” – enter the “Cloud Mall” interface – click “Use Cloud Saver Code” – enter the “Scan Redemption Code” interface, scan the valid redemption code – enter the ” redemption code” Payment interface” – select the device and channel to be redeemed – click ” redeem now” to complete the redemption

Tips:
(1) The number of channels for redemption Device is determined by the number of package service channels generated by the redemption code (if the service channel of the redemption code package is 4, then the device can only select 4 channels to purchase);
(2) There is no charge for redeeming the code cloud storage package using the redemption code, and each redemption code can only be used once;

Cloud video introduction

 Cloud recording is divided into two types: alarm recording and full-day recording.

Alarm recording, the video will only be uploaded when the camera detects that someone has passed, the item has been moved, and the camera alarm is triggered.

Recording all day means that the camera will automatically record when it is online and in good condition. It will be detected 24 hours a day and encrypted and uploaded to the cloud space.

The cloud video is lost when the device is deleted, the device uploads the cloud video, and the device is disconnected from the network. The device and the server are disconnected. The device network bandwidth is insufficient and the device cannot upload video and video.

After purchasing the cloud storage package, the cloud recording function will be automatically enabled.

You can click the “Cloud Recording” button corresponding to the device list to enter the cloud recording interface. Click the cloud storage service icon to enter the “Cloud Storage Service” – disable the cloud recording function.

Tips: After the cloud recording function is turned off, the validity period of the cloud storage will not be extended;

Cloud retention period

1.Cloud deposit validity period
Cloud deposits take effect from the date of purchase, that is, the validity period of cloud deposits is: “at the time of purchase” to “the same time point after one month / one year later”. For example, the cloud deposit package of 7 days/month was purchased at 0:00 on April 1, 2019, and the validity period of the cloud deposit is a natural month. It is: 0:00 on April 1, 2019, and O:00 on May 1, 2019.

Tips: The validity period of the channel cloud is the sum of the time of all the cloud storage packages in the channel. For example, channel 1 purchased two 7-day/ month cloud storage packages at 0:00 on April 1, 2019, then the cloud storage validity period is: 0:00 on April 1, 2019, and June 1, 2019. 0:00 on the day.

2. Can the cloud validity period be suspended?
Cloud storage is timed from the date of purchase, and will not stop during the time. after the user purchases the cloud storage, the action of deleting or stopping the uploading of the video can not affect the cloud expiration time

Cloud storage renewal

1. How to renew the cloud deposit package?
(1) Conditions for cloud surviving fee: The current device has purchased the cloud storage channel to purchase or renew the cloud storage package;
(2) Process of cloud surviving fee: Click the device “Cloud Recording” to enter the cloud recording interface click the “Cloud Storage Service” icon to enter the cloud storage service – select the channel to renew the fee – click the “Renew Now” button below to enter the cloud mall interface – Select the channel and package for renewal of the device – click on the renewal fee immediately to complete the renewal.

Tips: When you are renewing, if the renewal plan are using the package and the other channels of the package meet the renewal conditions, it will default to select previous package and channel.

Cloud storage migration

1. Unbound cloud service migration

(1) Conditions for migrating cloud services: The current account has a cloud storage service of unbound devices;

(2) Migration cloud service process:
After the device is added successfully, if the device meets the service migration conditions, the migration prompt box is displayed. After confirming, select the service that needs to be migrated to the newly added device, and click “Migration”.

If the device is a single-channel device, the device migrates directly to the device list interface. If the device is a multi-channel device, you need to select the number of channels equal to the number of services to migrate.

2. Offline device cloud service migration
(1) Offline device cloud service migration conditions: the current account has offline devices that have been bound to the cloud service;
(2) Migration process:
After the device is successfully added, if the device meets the service migration criteria, the migration prompt box is displayed. After the determination, the device iumps to the miaration interface.

b. Select an offline device to migrate. If the offline device is multi channel, you need to select the migrated device channel.

If the device is a single-channel device, the device migrates directly to the device list interface. If the device is a multi-channel device, you need to select an equal number of channels to migrate.
Tips: Do not migrate all day recording cloud services to NVR devices

FAQ

When added by LAN or cloud lD,indicate “device is not online” or “device is not registered”

1.Please make sure the network is normal and already enable DHCP on router.

2.lf users manually change network parameter of device,please change it to default parameter. Just press reset button for 10 seconds.

.

Device is online and there happen alarm , but cellphone gets no message?

1.Please make sure the APP is on and allowit to get APP push message,then it can get alarm notification.

2.After enable push message,check cellphone setup-application management,find out the “Eseecloud ” and enable to get push message.

.

Indicate “SD card error” after insert SD card.

1.Only support SD card max 128GB and FAT32 format. If the system file is error,please formart the SD card and choose FAT32 format.

2.When SD card is ruined or file system is wrong,please try to change or re-format the SD card.

.

Why the playback recording video content is uncontinuous?

1.For saving the room of SD card and extend the lifetime,device will only make recording when detect the actived image ,that’s why the recording content is uncontinuous.

.

Can the device support be powered by USB or power bank?

1.Suggest to use original power adapter. If use other adapter with the power is not stable,the device may be damaged.

.

Device preview help

Different devices support different functions. Preview interface only shows the functions supported.

.

<p>The post EseeCloud Wireless Security Camera System Installation first appeared on NVR IPCAMERA SECURITY.</p>

How to install CCTV cameras in corridors?

When designing an indoor video surveillance system, a common issue involves the control of corridors. The main task involves monitoring the movement of guests and personnel. This monitoring activity provides valuable data regarding the time and pattern of movement of the people being observed which can be used if post-incident analysis is needed.

Basic data

Consider the length and width of the corridor, ceiling height, and presence of possible obstacles (doors, items of furniture, etc.).

Questions

1. What is the minimal number of cameras sufficient for monitoring a corridor 15 meters long? 30 meters? Please justify the need for this number of cameras.

2. What are the specs of each camera that are crucial to fulfilling the task at hand? Please explain your choice.

3. What’s the proper positioning of the cameras – opposite one another or one after the other?

Solution
What is the solution? General terms:

Let’s start by clarifying a few points that are essential to solving the problem.

Load More :

• How to Setup Your Uniview Security System
• How to setup Push Notifications or Email Alerts for Arlo devices
• How To Two Way Talk Setup Guide

The objective of surveillance is to recognize a familiar person

CCTV systems are used to fulfill different tasks. Some of these are defined in national and international standards, such as in the EN 62676-2015, which deals with the tasks of identification, recognition and detection.

For corridor monitoring, a normal detection setting is 125 pixels per meter, since identification is handled at the entrance to the building and simple detection is not enough for post-incident analysis using the video surveillance archive.

The dead zone under the camera

No matter how small the corridor is, it is impossible to eliminate single camera “dead zones” (i.e., zones that are not in the camera’s field of view).

This person in the foreground will eventually step into a “dead zone” and disappear from the camera’s view. Therefore, we cannot guess from this camera whether he will proceed forward through the door to the staircase or turn right to the door of the office.

Information and unnecessary background

We’re generally not interested in the entire image delivered by the surveillance camera. Rather, just the most important aspects, including the observation targets, their recognition, time of appearance on camera, and their further actions. The rest is simply background noise that loads the network equipment with extra traffic and wastes hard drive and archive storage system space. Compare the informational capacity of two images:

These images come from the same camera. The difference is only in the frame format: 16:9 or a frame rotated by 90°, resulting in an aspect ratio of 9:16. This function is supported by a limited number of cameras and video management systems (software controlling and recording video from surveillance cameras), but it is essential for monitoring corridors. It’s commonly known as corridor format or corridor mode.

Keeping in mind that all cameras have a dead zone and that we’re not interested in walls when monitoring a corridor and trying to recognize individuals along the entire length of a corridor (that is, recognizing individuals who we know personally or whose close-up has been registered at the entrance to the building), we can begin to set up our surveillance cameras.

15-meter corridor

For a small corridor, the method of installing cameras at opposite ends facing one another generally works well. This allows you to monitor the entire length of the corridor using only two cameras. Depending on the length of the corridor, you should select the optimal focal length that allows recognition of a familiar person, described in EN 62676-2015 or similar standard, throughout the entire corridor segment.

The camera resolution should be set so that it’s at least minimally sufficient to perform the job at hand. 1.3 or 2 megapixels are generally satisfactory, but a resolution of 4 or 5 MP (or more) may be necessary for longer corridors. That said, it’s necessary to keep in mind lower light sensitivity (the ability to “see” in dim lighting conditions) and ensure sufficient lighting.

Pay attention, as well, to the fact that obstacles (in our case, 2 ATMs) can obscure the field of view. Apart from the above, the corridor may contain additional areas of interest that need to be controlled by individual cameras:

In this particular example, it’s not optimal to control the zone in front of the ATM by the “corridor” cameras. A more effective solution would be to install a separate camera with a wide-angle lens in the immediate vicinity of the ATM.

30-meter corridor

For longer corridors, the camera placement method might be similar, but you should keep longer-focus lenses in mind, selecting them as necessary.

In some cases, it’s better to use the “piggyback” method, in which one camera looks at the “dead zone” of the next one – a typical setup for protecting extended perimeters. This kind of setup allows the video surveillance operator to better survey the area. Noting the mounting direction of each of the cameras on the floor makes them much less complicated to monitor.

However, this method, in its original form, is not optimal for long corridors due to the presence of “dead ends” and the fact that there is nobody to watch over the “dead zone” of the first camera:

Conclusions

1. The solution to this issue requires at least 2 cameras installed at the opposite ends, one against the other.

2. In order to minimize the background, namely the walls that don’t need to be monitored, it’s best to use cameras that have a “corridor” frame format setting (9:16).

3. As a rule, the longer the corridor, the longer the focal length of the camera’s lens should be. The second factor to consider is the camera’s image resolution. It must be sufficient, but don’t be too focused on higher megapixels, which often cause reduced light sensitivity of the sensor as well as an increase of the load on the network infrastructure and storage systems. These are good reasons not to put too much trust in advertising slogans, but instead carefully consider your real needs.

<p>The post How to install CCTV cameras in corridors? first appeared on NVR IPCAMERA SECURITY.</p>

Description

This section will show how to setup / use Two Way Talk function with Dahua devices.

Testing

• N42B2P-992108_DH_NVR4XXX-4KS2_MultiLang_V4.000.0000001.4.R.191129
  • 192.168.2.216 or 3H066BDPAZA7D00
  • 2-Way talk working in SmartPSS
  • Not working in gDMSS Plus on Android
  • Not working in iDMSS Plus on iPhone
• Audio input and output can only be used for 2-Way Talk on N42B2P, No Audio Recording

Computer Audio Setup Prerequisite (WebUI, SmartPSS and DSS Express)

• 

  Typical Computer Audio Interface (inputs/Outputs)

• 

  Microphone plugged into Microphone input (red) Speaker plugged into Output (green)

• 

  Both Microphone and speaker plugged into computer

Instructions

SystemUI Old

Prerequisites

• Dahua device that supports 2 Way Talk
• Microphone connected to Audio Input
• Speaker connected to Audio Output

Video Instructions

Step by Step Instructions

1. From Live View

2. Hover the mouse cursor near the top of the screen until the bar appears

3. Click the Microphone icon to begin Two Way Talk

4. The icon will highlight when Two Way Talk is active

5. Click the icon again to end Two Way Talk

SystemUI New

Prerequisites

• Dahua device that supports 2 Way Talk
• Microphone connected to Audio Input
• Speaker connected to Audio Output

Video Instructions

Step by Step Instructions

1. From Live View

2. Hover the mouse cursor near the top of the screen until the bar appears

3. Click the Microphone icon to begin Two Way Talk

4. The icon will highlight when Two Way Talk is active

5. Click the icon again to end Two Way Talk

WebUI Old

Prerequisites

• Dahua device that supports 2 Way Talk
• Speaker connected to Audio Output
• PC Audio connected – Headphones and Microphone

• 

  Standard Audio ports on PC

• 

  Red (Microphone) Green (Speakers/Headset)

• 

  Microphone and headset plugged in to PC

Video Instructions

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click to load the camera/channel from the Channel list on the left side of the screen

3. Click Start Talk to begin Two Way Talk

4. The button will remain highlighted while active

5. Click End Talk to stop Two Way Talk

WebUI New

Prerequisites

• Dahua device that supports 2 Way Talk
• Speaker connected to Audio Output
• PC Audio connected – Headphones and Microphone

• 

  Standard Audio ports on PC

• 

  Red (Microphone) Green (Speakers/Headset)

• 

  Microphone and headset plugged in to PC

Video Instructions

Step by Step Instructions

1. Enter the IP of the device into a browser

At the Web Login

Enter the Username and Password

Click Login

2. Click to load the camera/channel from the Channel list on the left side of the screen

3. On the bar above the channel/camera, click the Audio Talk icon (microphone) to begin Two Way Talk

4. The icon will remain highlighted while Two Way Talk is active

5. Click the icon again to end Two Way Talk

SmartPSS

Prerequisites

• Dahua device that supports 2 Way Talk
• SmartPSS
• Device added to SmartPSS
• Speaker connected to Audio Output
• PC Audio connected – Headphones and Microphone

• 

  Standard Audio ports on PC

• 

  Red (Microphone) Green (Speakers/Headset)

• 

  Microphone and headset plugged in to PC

Video Instructions

Step by Step Instructions

1. From the Main Menu of SmartPSS

Click Live View

2. Use the device tree on the left to load the channel/camera by dragging and dropping or double clicking

3. On the bar above the channel/camera, click the Audio Talk icon (microphone) to begin Two Way Talk

4. The icon will remain highlighted while Two Way Talk is active

5. Click the icon again to end Two Way Talk

DSS Express

Prerequisites

• Dahua device that supports 2 Way Talk
• DSS Express
• Device added to DSS Express
• Speaker connected to Audio Output
• PC Audio connected – Headphones and Microphone

• 

  Standard Audio ports on PC

• 

  Red (Microphone) Green (Speakers/Headset)

• 

  Microphone and headset plugged in to PC

Video Instructions

Step by Step Instructions

1.

[Collapse]Mobile:iDMSS Plus & gDMSS Plus

Description

Prerequisites

Video Instructions

Step by Step Instructions

1. Two Way talk is done through the Live View of the device

From the main screen of the app

Select Live

2. Tap the + icon

3. Select the Device / Channel from the list

4. The device will connect and display Live View

Long press the microphone icon (for approximately 3 seconds)

The Voice Call window will appear

Tap to select which device in the list you wish to begin Two Way Talk with

The device will start to connect

5. Two Way talk has now started.

The microphone icon will remain highlighted while Two Way Talk is in use

6. Tap the icon again to end Two Way Talk

Bi-directional Talk (Two-Way Talk)

Description

Two-way audio enables you to receive and transmit audio through the IP camera.

Prerequisites

• IPC with audio capabilities

• External powered external mic.The IP Camera will not power the mic.

• Depending on some IPC models there might be a built in Mic. Please refer to Dahuasecurity.com for device specifications.

• If using an IPC capable of audio in and out, the NVR is an option. You can log directly into the IPC camera via Dahua WEB Service.

Video Instructions

Device-end to PC-end

Device Connection

Please connect the speaker or the pickup to the first audio input port in the device rear panel. Then connect the earphone or the sound box to the audio output port in the PC. Login the Web and then enable the corresponding channel real-time monitor. Please refer to the following interface to enable bidirectional talk.

Listening Operation

At the device end, speak via the speaker or the pickup, and then you can get the audio from the earphone or sound box at the pc-end.

PC-end to the device-end

Device Connection

Connect the speaker or the pickup to the audio output port in the PC and then connect the earphone or the sound box to the first audio input port in the device rear panel. Login the Web and then enable the corresponding channel real-time monitor. Please refer to the above interface to enable bidirectional talk.

Listening Operation

At the PC-end, speak via the speaker or the pickup, and then you can get the audio from the earphone or sound box at the device-end. 

For IPC

1. Log into IPC via webservice.

2. From the Setup Tab Select Camera ➞ Select Audio.

3. Check off enable ➞ select encode mode ➞ select sampling frequency. Repeat process for sub stream if being used.

4. Choose audio in type ➞ enable or disable noise filter ➞ You can adjust the speaker volume and mic level ➞ Be sure to click on save to save changes made.

5.On live view you can click on the audio icon to hear the audio feed of the camera location.

6.Click on the Mic icon to talk.

<p>The post How To Two Way Talk Setup Guide first appeared on NVR IPCAMERA SECURITY.</p>