smart nvr – NVR IPCAMERA SECURITY

Sunell NVR DVR FAQ

M.Salih ASLAN — Sun, 08 Jan 2023 09:12:59 +0000

Sunell NVR DVR FAQ Since its foundation in 1997, Sunell has been committing to the research, development, and innovation in intelligent video products and solutions, and has been the leading company in the surveillance industry in China.

With its headquarter located in Shenzhen, Sunell has 24 branch offices in China and has an international branch office in Hongkong. Sunell’s products have served in 113 countries and regions around the globe, and have provided security for billions of people.

Sunell NVR DVR FAQ

Sunell NVR Guide

Hard disk alarm or unable to record video

1. Make sure the hard disk is well (check by replacing with another new one)

2. When hanging with multiple hard disk, note that the power supply can meet the requirement, monitoring specialized hard disk is more stable with smaller starting current, lower working speed and consume less power than consumer hard disk, if power supply is not enough, the hard disk will not be able to work, which result in disk unrecognized and recording failure.

3. If NVR can read the disk, please format the disk first, as in most cases, repeating read and write will generate disk fragmentation or bad sectors, a formatting process will skip or repair the bad sector.

What is the default IP of NVR?

Default IP of NVR is 192.168.0.121

Is it possible to add third party IPC to Sunell NVR?

Yes, it is accessible for those third-party devices which support ONVIF protocol.

NVR can not acquire the IP address automatically?

Please connect the NVR to Router, and make sure the DHCP function of router is enabled,and open the function of automatically getting IP on NVR network setting menu

How to get RTSP stream from NVR?

RTSP format: rtsp://ip:port/snl/live/cameraid/streamid

Example: rtsp://192.168.1.19:554/snl/live/1/1

NVR can not add POE camera?

1. please check if the username and password is correct when adding the camera

2. network cable issue, please use CAT5e or CAT6e cable, It is recommended to use 8 cores for the wire, the POE cable sequence for data transmit is 1/2/3/6, for positive power is 4/5, for negative power is 7/8, the distance of cable should be controlled around 70 meters

3. camera is not powered on, please check if camera support POE

NVR can not find the IP of camera?

If camera is sunell camera, and you don’t know the ip, please connect camera and PC at same local network(or directly connect camera to PC), using IPsearch tool to find the correct IP, then add it to NVR; If camera is from third party, please check if they provide tool to search the camera IP, Then add it to NVR by input the IP, user name and password of camera

IPC often shows offline on NVR?

1. Power supply of IPC is not stable, for example, IPC will consume more power at night with IR Led enabled, which may cause electricity insufficient.

2. Network bandwidth issue, the switcher performance is insufficient

3. Camera issue:

If only the specified camera or channel has this issue, we recommend you replace with a normal camera to check

If offline issue happens randomly with all channel, we suggest checking reason 1 and 2

If offline happens to all channel at same time, please check if the camera is powered by centralized supply, please check the power status

Where to add other users account and what authorities can be set？

At System-User-Add:

3 different group of user can be created:

Administrator/Operator/Media user,

Administrators: Remote Live, PTZ, Playback, Channel Management, Device Management, System Management;
Operator: Remote Live, PTZ, Playback, System Management;
Media user: Remote Live, Playback; (please mind that the admin account is the superuser, it can not be deleted);

Channel selection:

How to know device info？

For old interface: go to “Setup”->”Device Information”

For new interface: go to “setting”, then you can get Information

Why the NVR cannot find the HDDs?

1. Please make sure to install it correctly and safely.

2. Please choose well-known brands of HDD: Seagate, WD, TOSHIBA

3. Ensure the life of the HDD.

4. try to format the HDD.

Why there is noise of audio in live view or playback?

1. go to web interface of the IP Camera firstly, and make sure if the audio is working well.

2. Decrease the audio-in setting.

3. change to use other connection cables or test other IP cameras with the same cable.

4. change another NVR for a test.

How to manage multiple NVRs?

Please use our VMS “Sunview” to manage multiple NVRs.

and here is the download link:

http://www.sunellsecurity.com/products.php?id=51

brief features:

〉server/Client Based

〉10,000+ Channels Connection

〉Face Recognition

〉1,000,000 Face Library

〉Smart Search

〉Multiple Screens

〉sunell Products Unified Management

〉Data Statistics

〉E-map

How to format the HDD?

For old interface: go to Record–>Storage–>Format

For new interface: go to Record–>Disk–>Format

How to get RTSP stream from NVR with V4.x FW?

1. Check IP and Port of NVR

2. Input RTSP URL: rtsp://

For example: rtsp://192.168.0.251:3036/1/2 — means get the RTSP stream 2 from channel 1 of the NVR with IP 192.168.0.251

3. Input username and password of the NVR (not IPC)

How to use DDNS function?

1. Sample information

2. Network setting

Please enter the valid values:

3. Check the status of Upnp option

If the Networking setting and router setting are correct, the Upnp will get the current ports, too.

Otherwise, if you get “0” for each port, please check your network and router setting.

4. DDNS

Enable this option and then select the proper protocol you want：

1) sunellddns

enter a name, then click [Test]

If it shows “Test successfully “, Then you can enter “dvr238.sunllddns.com:1230” in IE broswer

Note: 1230 is the HTTP Port in the option “UPnp”

How to use the dual ports of the NVR？How to get RTSP stream from NVR with V4.x FW?

1. One network port connects the camera and the other one connects the router connecting the external network.

2. Or one network port connects the IP address of one segment and another network port connects the camera of another segment.

NVR with two network ports can set different IP addresses for two network ports.

Whether you want to use it or not depends on your own situation.

Can NVR connect to wireless network?

NVR generally does not support wireless connection. Usually It is also possible to link routes or switches through network cables, or to connect directly with cameras using network cables.

What to do if the registered camera on NVR often drops off?

1. Camera power supply is unstable, test with new power supply.

2. Network cable Problems, or Check Switch Ports, or Replace new Switches.

3. Restore factory settings or upgrade new programs.

What to do if the NVR can’t startup?

1. please make sure the power supply is stable, or you can change a new one

2. if the NVR stop at the booting screen, maybe the main program(firmware) has the problem, please contact tech support to check it remotely.

3. If the NVR restart automatically, please update the firmware to the latest version.

Can the device continue to record when the device is disconnected to network?

1. NVR+HDD: the NVR is connected to the network camera, it is recommended to fix the IP address of the NVR. In the system configuration, network configuration, basic configuration interface, do not enable automatic acquisition of the IPV4 address, manually assign an IP to the NVR. In this case, in the case of an external network interruption, as long as the LAN is connected [the network between the camera and the NVR] without interruption, the recording will continue. The NVRis connected to an analog or coaxial camera, and whether the network is connected does not affect the recording.

2. IP Camera +SD card: the external network or LAN interrupt will not affect the recording.

Can H.265 and H.264 cameras connect to NVR with H.265 at the same time?

YES, it can be done like this.

However, 265 encoded video can only be realized when accessing the H.265 camera, saving space. If the H.264 camera is connected, this function cannot be realized.

How to calculate video storage capacity of HDD?

it’s the theoretical value

The capacity of storage space should be calculated according to the days, bit rate and type

1. Bit rate: 2Mb (for example)

channel and time	Disk space required
1 channel for 1 hour	2048Kb/8Byte3600sec=921600KB=900MB
1 channel for 1 day	900MB*24=21600MB≈21.09GB
1 channel for 30 days	21.09GB*30≈632.81GB
16 channel for 30days	632.81GB*16≈10125GB≈9.89TB

1. Bit rate: 4Mb (for example)

channel and time	Disk space required
1 channel for 1 hour	4096Kb/8Byte3600sec=1843200KB=1800MB
1 channel for 1 day	1800MB*24=43200MB≈42.19GB
1 channel for 30 days	42.19GB*30≈1265.7GB
16 channel for 30days	1265.7GB*16≈20251.2GB≈19.78TB

2. Bit rate: 6Mb (for example)

channel and time	Disk space required
1 channel for 1 hour	6144Kb/8Byte3600sec=921600KB=2700MB
1 channel for 1 day	2700MB*24=64800MB≈63.28GB
1 channel for 30 days	63.28GB*30≈1898.43GB
16 channel for 30days	1898.43GB*16≈30375GB≈29.66TB

How to add a NVR V4.2 to the app on Android or IOS phone via DDNS or IP Address?

1. Download and install the correct application

2. Ensure that the device is connected to the network properly. Check if the device’s network setting is set up correctly. You can find this in Setting > Network > Network > IP.

1)The device’s IP Address should be in the same range as the router’s gateway.

2)Subnet Mask should be same as what is indicated in the router’s network setting.

3)The Gateway should the router’s gateway or local IP address.

4)DNS 1 and DNS 2 can be your router’s DNS servers or you can use 8.8.8.8 and 8.8.4.4.

3. If you would like to use DDNS in adding the device to the app, please enable the DDNS first.Go to 1)Setting > Network > DDNS.

2)Click the toggle switch to Enable DDNS.

3)Choose one protocol.

4)Input a Domain Name inside the box.

4. If you would like to access the device remotely via WAN (external/public) IP or DDNS address using your mobile phone, you have to open/forward the Client Port of your device.

1)The Client Port can be found in Setting > Network > Network > Port.

2)The default value is 30001. If you changed this to a different number, please open/forward the new port number.

5. Open the app on your mobile phone. Click Add Device. Tap + Local Device.

6. Input the needed information on the app.

1)Enter a Nickname.

2)In the IP Address field, enter the local IP address, WAN (external/public) IP address or the DDNS address of the device.

3)In the Port field, input the Client Port indicated in the device setting. This information can be found in Setting > Network > Network > Port.

note: The default value of the Client Port is 30001. If you changed it to a different number, please make sure to input the new port number in the app.

4)Enter the Username and Password of the device.

5)Hit Save at the upper right corner to save the information.

How to back up the recordings of the NVR V4.2 on a USB flash drive?

1. Go to the Playback menu on the device’s GUI. It can be found on the task bar at the bottom of the screen when on live view.

2. On Time Search, select the specific recording that you want to back up. Select your preferred: Camera, Date, Record Type, Time Interval, Start Time

3. After selecting the specific time, click the icon (Start Backup) to start the backup process.

4. Drag the timeline to until when you would like to back up the recordings. The yellow bar indicates the timeframe of the recording that you will be downloading.

5. After selecting the specific timeframe of recording, click the (End Backup) icon to save the recording.

6. There will be pop-up message regarding the backup information and an option to save. Click Save to proceed.

7. Select the specific folder in the USB flash drive directory and then click OK.

8. You can view the backup status in the Backup menu.

How can I add a NVR V4.2 to the app on my Android or IOS phone via P2P?

How can I enable the motion detection recording on DVR V4.2 or NVR V4.2?

1. Click the right mouse button and select General under Alarm.

2. Turn on the Enable Alarm option and select a Duration Time from the drop-down list. Click Apply to save the settings.

3. Go to Motion Detection. Under Channel, select a specific channel you would like to set the motion detection recording. Turn on the Enable option.

Under Event Actions, turn on the specific action you would like to have if there is a motion detected by the device. To ensure that the device will record when there is a motion detected; don’t forget to turn on Post Recording, select a Recording Time and select the corresponding channel under Channel.

4. To configure the motion area and sensitivity, go to Area.

On the live preview on the page, you may select the motion area. Click the left mouse button on the live preview and drag the mouse on the specific area that you would like to set. The red grids represent the area that you have selected. To clear the area, just perform a double-click action using the left mouse button.

Select a Sensitivity option from the drop-down list. You may select from Low, Medium, High and Highest.

5. Under the Schedule setting, select the specific day and time that you would like to detect the motion. Use the left mouse button to select a specific box. You may also hold down and drag the left mouse button to select a wider schedule. To select all the boxes (24/7 by motion recording), just click the icon on the upper left corner. You may also click the same icon to clear the schedule.

6. Click Apply to save the settings.

7. If you would like to copy the motion detection settings to the other channels, click Copy and select the specific channel you would like to copy the setting. Click OK then Apply to save the changes.

How can I view the NVR using Chrome or Firefox browser on my Windows PC?

1. Enter the IP address of your NVR on the IE Tab’s address bar. You may now log in to your device using Chrome

2. After clicking “Allow…”, you will be prompted with another message as shown below. Select “Allow and Remember”.

3. You may now log in to your device.

How to back up the recordings of a DVR V4.2or NVR V4.2 on USB flash drive?

1. Go to the Playback menu on the device’s GUI. It can be found on the task bar at the bottom of the screen when on live view.

2. On Time Search, select the specific recording that you want to back up. Select your preferred:

[1] Camera

[2] Date

[3] Record Type

[4] Time Interval

[5] Start Time

3. After selecting the specific time, click the icon (Start Backup) to start the backup process.

4. Drag the timeline to until when you would like to back up the recordings. The yellow bar indicates the timeframe of the recording that you will be downloading.

5. After selecting the specific timeframe of recording, click the (End Backup) icon to save the recording.

6. There will be pop-up message regarding the backup information and an option to save. Click Save to proceed.

7. Select the specific folder in the USB flash drive directory and then click OK.

8. You can view the backup status in the Backup menu.

Security Center in NVR Ver4.3

To avoid password loss, here are three functions in Security Center:

1. Password

2. Secure Email

Password: it’s the login password

E-mail: available Email

3. Secure Question

Password: it’s the login password

How to set path for local image and video which is backup on WEB interface?

1. go to setting->local->download config

2. the set the paths here.

Note: these tables are only for reference, and the actual values have redundant.

The post Sunell NVR DVR FAQ first appeared on NVR IPCAMERA SECURITY.

How To – Add 3rd Party IP Camera to NVR

M.Salih ASLAN — Tue, 26 Jul 2022 20:05:08 +0000

Description

Follow the instructions below to connect a compatible IP camera with a Dahua NVR

Prerequisites

3rd Party ONVIF Capable IP Camera.
IP address of 3rd Party Camera.
Ports used by 3rd Party Camera
User Name and Password to 3rd Party Camera

Note: When you are using third party cameras you might have the full features, like motion detect.

Video Instructions

Step by Step Instructions

1. From the Main Menu Select Camera.

2. Select Manual add.

3. You can select the brand of the third party camera or ONVIF. If brand is not listed, you will need to set the IP camera to the ONVIF protocol from the camera itself if it is available as an option.

4. Enter the IP address of the 3rd party camera.

5. Default ports are RTSP port 554 and HTTP Port 80. It is possible the third party camera are on different ports than what is showing on the Dahua recorder. You will need to login into the third party camera and check which ports they are on as each device needs to be on the same ports. Enter User Name and Password of 3rd Party Camera and select OK to save.

The post How To – Add 3rd Party IP Camera to NVR first appeared on NVR IPCAMERA SECURITY.

V380 camera NVR problem (Guide)

M.Salih ASLAN — Mon, 04 Jul 2022 11:54:54 +0000

Does the V380 camera support network video recorders?

· GM and anyka V380 products support connection to network video recorders (NVR)
· Other solutions products do not support access to network video recorders (NVR)
· 200W and above resolution products do not support access to network video recorders (NVR) temporarily.
· If the device The firmware version is anyka 2505, GM 3505, etc. or above. RTSP is not enabled by default and cannot transmit images. Please contact technical personnel to obtain upgrade packages.

What video recorder can connect V380 camera?

The V380 camera can be connected to mainstream video recorders from HIKVISION ,dahua, Techwell, etc.

Note: The NVR must support the standard Onvif_2.0 protocol.

In what way can a V380 camera be connected to video recorder

· The V380 camera can be connected to the VCR via cable (with network port) or wirelessly.
· If to be connected to router, the camera and video recorder should be connected to the router of same gateway,if to be connected to switch, an IP address is needed to be assigned to camera.

Network video recorder (NVR) connection method

· Connect the camera and NVR to the LAN and add the device through automatic search.
· If the NVR does not find the device IP, please confirm that the network cable is connected and the camera is the same as the NVR gateway

Note: The onvif protocol is selected for the network protocol, and the port 8899 is selected for the network port.

NVR found device IP but failed to connect

· If the device firmware version is 2505,3505 or later, RTST is not enabled by default and cannot transfer images. Please contact technical personnel to obtain upgrade package upgrades
. Try to fill in the video stream path directly (0.0.0.0 is the device IP address, which needs to be manually filled in)
[Sub Stream]rtsp://0.0.0.0/live/ch00_0
[Master stream]rtsp://0.0.0.0/live/ch00_1

Network recorder (NVR) manual connection method

· If the recorder cannot automatically search for connections, please use the manual connection method
1) Set a static IP address for the device
2) Open the NVR Manually add a device interface
3) Fill in the connection parameters
. Device IP: Fill in the device’s static IP
. Connection Protocol: ONVIF
Port: 8899
Image format: H.264
Connection method: TCP
Video source path: /live/ch00_1
User name: admin
Password: Empty

The post V380 camera NVR problem (Guide) first appeared on NVR IPCAMERA SECURITY.

HEROSPEED New All Firmware Software Tools Download

M.Salih ASLAN — Sat, 08 May 2021 21:03:07 +0000

Herospeed Technology is a high-tech company specialized in software development, software customization and software implementation. It owns a group of long-term professionals who are engaged in software development and software customization. With strong technical development strength, Herospeed Technology fully meets customer needs.

SDP2000

Channels	Version Info	Time	Download Url
SDP2000（Windows）	SDP2000_EN_x64_V2.4.5	2020-12-16 14:38:18
SDP2000（Windows）	SDP2000_EN_x64_V2.5.2	2021-01-27 17:33:12

PC Client

Channels	Version Info	Time	Download Url
VMSLite (Windows)	VMSLite Setup8.2.44.2	2019-04-11 10:53:25	Download
VMSLite (Mac)	VMSLite for Mac8.2.29.6	2018-07-19 15:31:29
VMS (Windows)	VMS Setup8.2.29.6	2018-07-20 09:50:49
iVMS320(Windows)	iVMS320_V21.2.2.4	2021-01-15 16:17:18
iVMS320(Mac)	iVMS320 setup for Mac_21.2.5.4	2021-02-22 14:19:45
iVMS330(Windows)	iVMS330_20.2.42.5_Setup	2020-10-23 13:51:04

RK IP Camera

Resolution	Type	Firmware	Time	Download Url
2MP	AI	RV1109_IMX307_BASE_W_21.1.17.2	2021-04-28 16:18:48
2MP	AI	RV1109_IMX307NAND_BASE_W_21.1.12.5	2021-03-29 18:00:51
5MP	AI	RV1109_IMX335_BASE_W_21.1.12.4	2021-03-29 18:01:23
5MP	AI	RV1109_IMX335NAND_BASE_W_21.1.12.5	2021-03-29 17:57:25
8MP	AI	RV1126_IMX415_BASE_W_21.1.16.7	2021-04-28 16:01:42

Ambarella IP Camera

Resolution	Type	Firmware	Time	Download Url
2MP	Normal	s2l33m_imx322_W_7.1.25.1	2020-06-04 15:39:53
3MP	Normal	s2l55m_imx123_W_7.1.25.2	2020-06-04 15:40:25
4MP	Normal	S2L55M_OV4689_W_7.1.18.3	2020-06-04 15:42:54
6MP	FISHEYE	S2E66_IMX178_W_7.1.3.4	2020-06-04 15:43:12

Hisilicon IP Camera

Resolution	Type	Firmware	Time	Download Url
2MP	Normal	3516EV200_IMX307_B1T0A1M0C0P1_W_20.1.33.1	2021-02-06 16:07:09
	Normal	3516EV200_F23_B1T0A1M0C0P1_W_20.1.33.1	2021-02-06 16:02:03
	SD	3516CV500_IMX462_B1T1A2M1C2P1_W_20.1.32.5	2021-02-06 16:09:31
		3516EV200_IMX307_B1T1A1M0C0P1_W_20.1.33.1	2021-02-06 16:07:35
		3516CV500_IMX307_B1T1A2M1C2P1_W_20.1.33.4	2021-02-06 16:02:50
		3516EV200_F23_B1T1A1M0C0P1_W_20.1.33.1	2021-02-06 16:01:26
	PTZ	3516EV200_IMX307_X10T1A1M0C0P1_W_20.1.33.3	2021-02-06 16:59:48
	PTZ	3516CV500_IMX462_X10T1A1M0C0P1_W_20.1.33.4	2021-02-06 16:59:02
	AI	3516CV500_IMX307_AR_EM_AF_BD_W_21.1.3.5	2021-02-06 17:05:11
		3516CV500_IMX307_AR_EM_BASE_BD_W_20.1.52.2	2021-01-20 10:56:02
		3516CV500_IMX327_AR_EM_BASE_BD_W_21.1.2.6	2021-01-20 10:54:38
4MP	MINI	3516DV300_IMX335_MINI_WIFI_BD_W_20.1.33.6	2021-02-06 16:53:02
5MP	Normal	3516DV200_IMX335_B1T0A1M0C0P1_W_20.1.47.6	2021-02-06 16:04:48
	SD	3516DV200_IMX335_B1T1A1M0C0P1_W_20.1.47.6	2021-02-06 16:05:08
	SD	3516DV200_IMX335_B1T1A2M1C2P1_W_20.1.48.1	2021-02-06 16:03:56
	PTZ	3516DV200_IMX335_X80T1A2M1C0P1_W_21.1.5.7	2021-02-22 14:30:06
	PTZ	3516DV200_IMX335_X10T1A1M0C0P1_W_20.1.47.6	2021-02-06 16:55:14
	AI	3516DV300_IMX335_AR_EM_BASE_BD_W_21.1.13.5	2021-04-12 11:04:03
	AI	3516DV300_IMX335_AR_EM_AF_BD_W_21.1.11.2	2021-04-12 11:03:32
8MP	Normal	3516AV300_IMX415_B1T0A1M0C0P1_W_20.1.35.3	2021-02-06 15:54:48
	SD	3516AV200_OS08A10_B1T1A1M0C0P1_W_20.1.33.5	2021-02-06 15:56:08
	SD	3516AV300_IMX415_B1T1A2M1C0P1_W_20.1.35.3	2021-02-06 15:55:20
	PTZ	3516AV300_IMX415_X10T1A2M1C0P1_W_20.1.32.5	2021-02-06 19:18:15
	PTZ	3516AV200_OS08A10_X70T1A2M1C1P1_W_20.1.35.3	2021-02-06 16:56:56
	AI	3516AV300_IMX415_AR_EM_BD_W_21.1.12.4	2021-04-12 11:04:46

PTZ	3516AV300_IMX415_X10T1A2M1C0P1_W_20.1.32.5	2021-02-06 19:18:15
	3516AV200_OS08A10_X70T1A2M1C1P1_W_20.1.35.3	2021-02-06 16:56:56
	3516AV200_IMX274_AF4X_AUDIO_TF_W_8.1.15.2	2020-06-04 15:27:21
WIFIIPC_SD	3516AV200_OS08A10_W2T1A1M0C1P1_W_9.1.1.5	2020-06-04 15:27:44
AI	3516AV300_IMX415_AR_EM_BD_W_21.1.12.4	2021-04-12 11:04:46
12MP	SD	3519V101_IMX226_B1T1A1M0C0P1_W_20.1.13.2	2020-06-04 15:28:08
	BOX	3519V101_IMX226_BOX_BD_W_9.1.1.6	2020-06-04 15:28:22
	PTZ	3519V101_IMX226_X70T1A2M1C1P1_W_20.1.13.2	2020-06-04 15:28:37
	FISHEYE	3519V101_IMX226_FISHEYE_W_9.1.16.1	2020-06-04 15:36:22
	FISHEYE	3519V101_IMX226_FISHEYE_BD_W_9.1.46.3	2020-06-04 15:30:04

SigmaStar

Resolution	Type	Firmware	Time	Download Url
2MP	AI	SSC336Q_SC200AI_W_21.1.12.2	2021-04-12 10:56:48
5MP	AI	SSC338Q_SC500AI_W_21.1.12.2	2021-04-12 10:58:33
8MP	AF	SSC338Q_SC8238_W_20.1.48.2	2021-01-18 16:35:12
8MP	WH	SSC338Q_SC500AI4K_W_21.1.13.2	2021-04-12 10:59:31

Fullhan IP Camera

Resolution	Type	Firmware	Time	Download Url
2MP	Normal	FH8852_IMX307_B1T0A1M0C0P1_W_20.1.51.3	2021-02-06 16:46:23
		FH8852_F23_B1T0A1M0C0P1_W_20.1.51.3	2021-02-06 16:45:00
		FH8852_F23_B1T0A1M0C0P2_W_20.1.27.4	2021-02-06 16:44:14
		FH8852_IMX307_B1T0A1M0C0P2_W_20.1.29.3	2020-08-07 19:19:34
		FH8830_F22_W_8.1.11.5	2020-06-04 15:43:29
3MP	FISHEYE	FH8830_AR0330_FISHEYE_W_9.1.15.4	2020-06-04 15:46:30
3MP	FISHEYE	FH8830_AR0330_FISHEYE_BD_W_9.1.2.1	2020-06-04 15:43:43
4MP	Normal	FH8856_IMX335_B1T0A1M0C0P1_W_20.1.39.2	2021-02-06 16:49:27
4MP	Normal	FH8856_IMX335_B1T0A1M0C0P2_W_20.1.27.3	2020-08-07 16:50:26
5MP	Normal	FH8856_K05_B1T1A1M0C0P1_W_20.1.10.4	2020-08-07 19:10:28
	SD	FH8856_K05_B1T1A1M0C0P1_W_20.1.10.4	2020-08-07 19:10:00
	WIFIIPC_SD	FH8856_K05_W1T1A1M0C0P1_W_20.1.35.4	2021-02-06 16:50:32
	WIFIIPC_SD	FH8856_K05_W1T1A1M0C0P2_W_20.1.28.2	2020-08-07 16:14:08

NVR

Channels	Version Info	Time	Download Url
4CH	NVR_HI3798_4CH	2019-10-15 16:38:28
9CH	NVR_SS621Q_9CH_4POE_PNP_BD_V5_update_V21.1.2.5	2021-01-22 11:31:31
	NVR_MC6830_9CH_4POE_PNP_BD_V5_update_KITS_V20.1.43.5	2021-01-14 10:17:01
	NVR_SS621Q_9CH_BD_V5_update_V21.1.1.4	2021-01-08 08:31:14
	HI3536E_H265_9CH_BD_V5_update_V20.1.52.1	2021-01-06 10:48:46
	NVR_MC6830_9CH_AL_V5_update_V20.1.47.3	2021-01-06 10:12:45
	NVR_MC6830_9CH_BD_V5_update_V20.1.49.1	2020-12-02 15:29:34
	NVR_MC6830_9CH_4POE_PNP_BD_V5_V20.1.43.5	2020-10-27 08:31:52
	NVR_HI3536D_H265_2G_9CH_BD_V5_V20.1.34.3	2020-08-24 09:53:58
	NVR_HI3536D_H265_9CH_4POE_PNP_BD_V5_V20.1.34.3	2020-08-24 09:51:47
	NVR_HI3536D_H265_9CH_8POE_PNP_BD_V5_V20.1.34.3	2020-08-24 09:47:51
	NVR_HI3536D_H265_2G_8POE_BD	2020-03-03 10:06:06
	NVR_HI3536D_H265_9CH_4POE_PNP_BD	2020-02-24 09:22:24
	NVR_HI3536D_H265_2G_9CH_BD	2020-01-17 14:36:47
	NVR_HI3798_9CH	2019-10-15 16:39:12
	NVR_HI3536D_H265_36D08.216.8POE.V8.1.19.1	2018-07-27 11:18:27
	NVR_HI3536D_H265_36D04.216.4POE.V8.1.19.1	2018-07-27 11:16:51
16CH	NVR_MC6830_16CH_BD_V5_update_V21.1.17.4	2021-05-06 15:13:34
	NVR_MC6830_16CH_8POE_PNP_BD_V5_update_V21.1.12.6	2021-03-29 16:43:49
	NVR_SS621Q_16CH_8POE_PNP_BD_V5_update_V21.1.2.4	2021-01-22 13:41:20
	NVR_SS621Q_16CH_BD_V5_update_V21.1.2.1	2021-01-14 10:08:50
	NVR_MC6830_16CH_AL_V5_update_V20.1.47.3	2021-01-06 10:18:25
	NVR_HI3536C_H265_16CH_8POE_PNP3_BD_V5_V20.1.36.4	2020-09-07 14:44:55
	NVR_HI3536C_H265_16CH_4POE_PNP3_BD_V5_V20.1.36.4	2020-09-07 14:37:29
	NVR_HI3536D_H.265_4G_16CH_BD_V5_V20.1.35.3	2020-08-29 16:11:39
	NVR_HI3536C_H265_16CH_8POE_PNP3_BD_KITS	2020-07-14 13:40:02
	NVR_HI3536C_H265_16CH_4POE_PNP3_BD_KITS	2020-07-14 10:34:15
	NVR_HI3536C_H265_16CH_8POE_PNP3_BD_V5_KITS	2020-07-14 10:18:00
	NVR_HI3536C_H265_16CH_4POE_PNP3_BD_V5_KITS	2020-07-14 10:08:26
	NVR_HI3536C_H265_16CH_8POE_BD	2020-03-06 09:02:22
	NVR_HI3536C_H265_16CH_4POE_PNP3_BD	2020-01-17 15:08:08
	NVR_HI3536C_H265_16CH_8POE_PNP3_BD	2020-01-17 14:55:20
	NVR_HI3536D_H.265_4G_16CH_BD	2019-12-27 15:17:16
	NVR_HI3536C_H265_16CH_BD	2019-11-07 16:34:41
	NVR_HI3798_16CH	2019-10-15 16:39:52
	NVR_HI3536C_H265_16CH_8POE_PNP2_BD	2019-09-16 13:50:50
	NVR_HI3536C_H265_36C08.8POE.PNP.V8.1.26.2	2018-07-27 11:44:56
	NVR_HI3536C_H265_36C16.V8.1.15.2	2018-07-27 11:34:20
25CH	NVR_MC6830_25CH_BD_V5_update_V20.1.49.3	2021-01-06 10:28:06
	NVR_HI3536C_H265_25CH_16POE_PNP2_BD_V5_V20.1.37.4	2020-09-12 09:13:22
	NVR_HI3536C_H265_25CH_BD_V5_V20.1.36.4	2020-09-07 15:07:05
	NVR_HI3536C_H265_25CH_16POE_PNP3_BD_V5_V20.1.36.4	2020-09-07 14:58:58
	NVR_HI3536C_H265_25CH_16POE_PNP2_BD	2020-04-20 17:06:06
	NVR_HI3536C_H265_25CH_BD	2020-01-17 15:20:17
	NVR_HI3536C_H265_25CH_16POE_PNP3_BD	2019-12-19 19:06:55
	NVR_HI3536C_H265_36C16.16POE.PNP.V8.1.27.3	2018-07-27 13:38:36
	NVR_HI3536C_H265_36C25.V8.1.15.2	2018-07-27 13:33:58
	NVR_HI3535_25_V	2017-10-26 14:00:57
36CH	NVR_HI3536_H265_36CH_X1_BD_V5_V20.1.37.6	2020-09-12 17:27:23
	NVR_HI3536_H265_36CH_BD_V5_V20.1.35.2	2020-08-26 11:06:59
	NVR_HI3536_H265_36CH_BD	2020-02-21 16:45:09
	NVR_HI3536_H265_36CH_X1_BD	2019-09-16 15:30:50
	NVR_HI3536_36_V8.1.20.5	2018-07-27 13:47:16
64CH	NVR_HI3536_H265_64CH_BD_V5_V20.1.37.4	2020-09-12 15:11:48
	NVR_HI3536_H265_64CH_BD	2020-03-13 15:45:58
	NVR_HI3536_64_V9.1.13.5	2019-04-13 15:11:55

XVR

Channels	Version Info	Time	Download Url
4CH	XVR_MC6630_2830_4_BD_V5_updateV21.1.11.1	2021-03-19 09:38:16
	XVR_MC6630_2830_4_BD_4G_V5_updateV21.1.9.4	2021-03-10 14:24:35
	XVR_MC6630_2830_4_AL_V5_updateV20.1.48.2	2021-01-06 16:33:09
	XVR_MC6630_2830_4_AL_4G_V5_updateV20.1.48.5	2021-01-06 16:28:16
	XVR_3520DV400_6158C_4_BD_4G_V5_updateV20.1.27.1	2020-06-30 20:04:02
	XVR_3520DV400_6158C_4_BD_V5_updateV20.1.27.1	2020-06-30 09:17:00
	XVR_3521D_6158_4_BD_V5_updateV20.1.25.6	2020-06-23 10:56:00
	XVR_3520DV400_6158C_4_BD_2G_V5_updateV20.1.25.6	2020-06-23 10:53:42
	XVR_3531D_6158_4_BD_V	2020-05-21 14:10:48
	XVR_3520DV400_6158C_4_BD_4G_V	2020-05-07 10:10:24
	SDI_DVR_3521D_334S_4_BD_V	2020-04-28 14:38:49
	XVR_3520DV400_6158C_4_BD_V	2020-04-09 17:22:06
	XVR_3521D_6158_4CH_BD_V	2020-04-07 10:47:07
	XVR_3520DV400_6158C_4_BD_2G	2019-08-16 09:00:44
	XVR_3520DV200_6134C_4_v	2019-03-08 15:05:02
	XVR_3520DV400_6158_4_BD_V	2019-02-28 14:07:49
	XVR_3520DV200_6134C_4_BD_V	2019-01-30 16:31:38
	XVR_3521D_6158_SMARTKITS_4_BD_V	2019-01-09 14:09:24
	XVR_3520DV200_6134C_SMARTKITS_4_BD_V	2019-01-09 10:29:13
	XVR_HI3520DV200_4_V	2018-10-25 15:53:28
	XVR_3520DV200_4_v	2018-06-14 20:16:43
	XVR_3531D_6158_4_v	2018-06-14 20:06:20
	SDI_DVR_3521A_334S_4_v	2018-04-23 18:39:49
	XVR_3521D_6158_4_v	2018-04-23 18:35:38
	XVR_3520DV300_2826_4_v	2018-04-23 18:24:39
	XVR_3521A_2826_4_v	2018-04-23 18:04:09
	XVR_HI3521A_4_v	2017-10-26 16:05:50
8CH	XVR_MC6630_2830_8_BD_V5_updateV21.1.10.5	2021-03-16 10:48:26
	XVR_MC6630_2830_8_AL_V5_updateV20.1.48.2	2021-01-06 16:37:17
	XVR_3531D_6158_8_BD_V5_updateV20.1.25.6	2020-06-23 10:55:33
	XVR_3521D_6158C_8_BD_V5_updateV20.1.25.6	2020-06-23 10:54:31
	XVR_3520DV400_6158C_8_BD_V5_updateV20.1.24.4	2020-06-15 09:10:15
	XVR_3520DV400_6158C_8_BD_V	2020-04-30 15:39:08
	SDI_DVR_3531D_334S_8_BD_V	2020-04-28 16:55:44
	XVR_3531D_6158_8_BD_V	2020-04-20 16:07:30
	XVR_3521D_6158C_8_BD_V	2020-04-07 10:41:55
	XVR_3521D_6158_8_BD_V	2019-03-11 14:07:43
	XVR_3520DV300_6134C_8_v	2019-03-08 15:05:49
	XVR_3520DV400_6134C_8_BD_V	2019-03-01 09:10:08
	XVR_3531DCAS_6158_16_8_BD_V	2019-01-29 15:11:55
	XVR_3531DCAS_6158_8_BD_V	2019-01-19 15:00:33
	XVR_HI3531A_8_v	2018-07-03 09:31:45
	XVR_3521D_6158_8_v	2018-06-15 08:42:00
	XVR_3520DV300_8_v	2018-06-14 19:56:18
	SDI_DVR_3531A_334S_8_v	2018-04-23 19:04:14
	XVR_3531D_6158_8_v	2018-04-23 19:02:21
	XVR_3521A_2826_8_v	2018-04-23 18:55:07
	XVR_3531A_2826_8_v	2018-04-23 18:48:12
	XVR_HI3520DV300_8_v	2018-02-09 16:14:20
16CH	XVR_3531DCAS_6158_16_BD_V5_updateV20.1.27.3	2020-07-02 08:37:00
	XVR_3531D_6158C_16_BD_V5_updateV20.1.24.4	2020-06-15 09:11:37
	XVR_3531D_6158C_16_2_BD_V5_updateV20.1.24.4	2020-06-15 09:11:18
	XVR_3521D_6158C_16_BD_V5_updateV20.1.24.4	2020-06-15 09:10:54
	SDI_DVR_3531DCAS_334S_16_BD_V	2020-05-27 15:59:26
	XVR_3531DCAS_6158_16_BD_V	2020-05-21 08:51:20
	XVR_3531D_6158C_16CH_2_BD_V	2020-04-20 19:19:14
	XVR_3531D_6158C_16_BD_V	2020-04-20 19:15:57
	XVR_3521D_6158C_16_BD_V	2020-04-07 10:44:06
	XVR_3531D_6158C_16_BD_X1_V	2019-09-23 16:57:22
	XVR_3521D_6134C_16_BD_V	2019-03-15 13:39:18
	XVR_3531D_6158_16_BD_V	2019-01-19 14:57:17
	XVR_3531A_2826_16_v	2018-09-17 17:15:07
	XVR_3521D_6134C_16_v	2018-07-27 11:05:18
	XVR_3521A_16_v	2018-07-16 15:38:04
	XVR_3531D_6158_16_v	2018-06-15 08:43:36
	XVR_HI3521A_16_v	2018-06-15 08:34:06
32CH	XVR_3531DCAS_6158_32_BD_V	2019-04-24 15:10:29
	XVR_3531D_6134C_32_BD_V	2019-01-30 09:46:04
	XVR_3531A_2816_32_v	2018-04-23 19:15:13
	XVR_HI3531A_32_v	2018-02-09 16:53:32

Wifi kits

Resolution	Type	Firmware	Time	Download Url
1MP	4CH	NVR_WIFIHI3520D2G_4_V8.1.29.1	2020-06-04 15:59:40
	4CH	3518EV200_OV9732_W_WIFIKITS_8.1.5.4	2020-06-04 15:59:21
	9CH	NVR_HIWIFI3520D2G_9_V8.1.33.5	2020-06-04 15:59:03
	9CH	3518EV200_OV9732_W_WIFIKITS_8.1.5.4	2020-06-04 15:58:34
2MP	4CH	3518EV300_SP2309_W3T0A0M0C0P0_W_21.1.5.2	2021-02-24 15:07:53
		NVR_WIFIHI3520D2G_4_V8.1.29.1	2020-06-04 16:02:47
		3518EV200_IMX323_WIFIKITS_W_8.1.3.5	2020-06-04 16:02:25
		NVR_WIFI3536D2G_SW01_4_V8.1.32.2	2020-06-04 16:02:09
		3516EV100_F23_W30T0A0M0C0_W_8.1.29.2	2020-06-04 16:01:50
		3516EV100_F23_W30T0A2M0C0_W_8.1.29.2	2020-06-04 16:01:32
		3516EV100_F23_W30T0A0M4C0_W_8.1.29.2	2020-06-04 16:01:13
		3516EV100_F23_W30T0A0M3C0_W_8.1.29.2	2020-06-04 16:00:55
		NVR_WIFI3536D2G_SW01_BD_4_V9.1.1.4	2020-06-04 16:00:39
	9CH	FH8852V200W_JXF23_W3T0A0M0C0P0_W_21.1.9.1	2021-03-10 14:11:00
		3518EV300_SP2309_W3T0A0M0C0P0_W_21.1.5.2	2021-02-24 15:08:32
		NVR_SS621Q_9CH_WIFI_SW03_BD_V5_update_V21.1.6.4	2021-02-06 19:43:34
		NVR_HIWIFI3520D2G_9_V8.1.33.5	2020-06-04 16:05:18
		3518EV200_IMX323_WIFIKITS_W_8.1.3.5	2020-06-04 16:04:59
		NVR_WIFI3536D2G_HW01_8_V8.1.21.1	2020-06-04 16:04:41
		3516EV100_F23_W30T0A0M0C0_W_8.1.29.2	2020-06-04 16:04:20
		3516EV100_F23_W30T0A2M0C0_W_8.1.29.2	2020-06-04 16:04:05
		3516EV100_F23_W30T0A0M3C0_W_8.1.29.2	2020-06-04 16:03:46
		3516EV100_F23_W30T0A0M4C0_W_8.1.29.2	2020-06-04 16:03:32
		NVR_WIFI3536D2G_HW01_BD_9_V9.1.1.4	2020-06-04 16:03:11
4MP	4CH	NVR_WIFI3536D2G_SW01_4_V8.1.32.2	2020-06-04 16:05:58
	4CH	3516D_OV4689_W_WIFIKITS_8.1.20.4	2020-06-04 16:05:37
	9CH	NVR_HIWIFI3798_9_V7.1.38.2	2020-06-04 16:09:01
		3516D_OV4689_W_WIFIKITS_8.1.20.4	2020-06-04 16:06:45
		NVR_WIFI3536D2G_HW01_8_V8.1.21.1	2020-06-04 16:06:27
5MP	4CH	FH8856V500W_JXK05_W3T0A0M0C0P0_W_21.1.9.1	2021-03-10 14:52:05
		NVR_SS621Q_4CH_WIFI_SW03_BD_V5_update_V21.1.6.4	2021-03-10 14:50:25
		NVR_WIFI3536D2G_HW01_4_V8.1.38.5	2020-06-04 16:11:58
		3516D_OS05A10_W30T0A1M0C1_W_8.1.38.3	2020-06-04 16:11:28
		NVR_WIFI3536D2G_HW01_BD_4_V9.1.1.4	2020-06-04 16:11:08
		NVR_WIFI3536D2G_SW01_BD_4_V9.1.1.4	2020-06-04 16:10:41
8MP	4CH	FH88568_JXK05_W3T0A0M0C0P0_W_21.1.9.1	2021-03-10 14:43:37
8MP	4CH	NVR_SS621Q_4CH_WIFI_SW03_BD_V5_update_V21.1.6.4	2021-02-06 17:52:14

Tools

Tool name	Version Info	Time	Download Url
Search Tool(Windows)	SearchTool_setup20.2.52.1	2020-12-25 14:36:16
Search Tool(Mac)	SearchTool_8.2.14.2	2018-04-19 15:01:26
IPWizardIII(Windows)	IPWizardIII_2.2.5	2018-11-07 16:38:30
TestTool(Windows)	TestTool_v2.0.3.6906	2020-07-08 15:01:38

Manual

Class	Title	Language	Type	Time	Download Url
IPC	Wi-Fi IP Camera Quick Start Guide Ali	English	pdf	2020-07-13 11:28:52
	Smart IP Camera Quick Start Guide Ali	English	pdf	2020-07-13 11:28:17
	IP Camera Quick Start Guide Ali	English	pdf	2020-07-13 11:27:47
	Wi-Fi IP Camera Quick Start Guide 350	English	pdf	2020-07-13 11:11:09
	Smart IP Camera Quick Start Guide 350	English	pdf	2020-07-13 11:10:39
	IP Camera Quick Start Guide 350	English	pdf	2020-07-13 11:10:01
	Dual Smart IP Camera Quick Start Guide BD	English	pdf	2020-07-13 11:00:58
	Camera Quick Installation Guide（Split Type）	English	pdf	2019-09-30 15:37:20
	IP Camera Quick Start Guide CK	English	pdf	2019-08-15 13:35:42
	Wi-Fi IP Camera Quick Start Guide BD	English	pdf	2019-07-12 10:18:00
	Smart IP Camera Quick Start Guide BD	English	pdf	2019-05-14 16:48:50
	IP Camera Quick Start Guide BD	English	pdf	2018-09-21 08:33:56
	Camera Quick Installation Guide	English	pdf	2018-06-19 16:11:51
	WiFi IP Camera Quick Start Guide	English	pdf	2018-06-19 16:11:38
	IP Camera User Manual	English	pdf	2018-06-19 16:11:19
	IP Camera Quick Start Guide	English	pdf	2018-06-19 09:25:31
NVR	NVR Quick Start Guide BV_5.0	English	pdf	2020-08-03 16:20:12
	NVR Quick Start Guide Ali_5.0	English	pdf	2020-08-03 16:19:40
	NVR Quick Start Guide 350_5.0	English	pdf	2020-08-03 16:18:41
	NVR User Manual_5.0	English	pdf	2020-05-28 13:34:56
	NVR Quick Start Guide BD_5.0	English	pdf	2020-04-09 16:26:42
	Wi-Fi NVR Quick Start Guide BD	English	pdf	2019-10-18 14:04:24
	Smart NVR Quick Start Guide BD	English	pdf	2019-07-09 17:00:34
	NVR Quick Start Guide BD	English	pdf	2018-09-03 09:02:14
	NVR User Manual	English	pdf	2018-06-19 16:12:58
	NVR Quick Start Guide	English	pdf	2018-06-19 09:32:18
XVR	XVR User Manual_5.0	English	pdf	2020-11-11 17:47:54
	XVR Quick Start Guide BV_5.0	English	pdf	2020-08-03 16:32:42
	XVR Quick Start Guide 350_5.0	English	pdf	2020-08-03 16:31:59
	XVR Quick Start Guide Ali_5.0	English	pdf	2020-08-03 16:31:34
	XVR Quick Start Guide BD_5.0	English	pdf	2020-06-09 17:16:09
	Smart XVR Quick Start Guide	English	pdf	2019-09-03 08:39:55
	XVR Quick Start Guide BD	English	pdf	2018-09-04 16:11:40
	XVR Quick Start Guide	English	pdf	2018-06-19 16:26:52
	XVR User Manual	English	pdf	2018-06-19 16:26:30
EX-SDI&HD-SDI DVR	EX-SDI&HD-SDI DVR User Manual	English	pdf	2018-12-21 08:28:55
	EX-SDI&HD-SDI DVR Quick Start Guide BD	English	pdf	2018-09-03 09:07:57
	EX-SDI&HD-SDI DVR Quick Start Guide	English	pdf	2018-07-11 10:15:48
PLC Kits	PLC Kits Quick Start Guide	English	pdf	2018-06-19 16:30:26
PoE Kits	PoE Kits Quick Start Guide BD	English	pdf	2020-07-17 16:47:43
PoE Kits	PoE Kits Quick Start Guide BD 5.0	English	pdf	2020-07-17 16:29:19
WiFi Kits	Wi-Fi Kits Quick Start Guide BD 5.0	English	pdf	2021-03-30 10:25:27
	Wi-Fi Kits Quick Start Guide BD	English	pdf	2021-03-17 14:29:38
	Non-economical Wi-Fi Kits Quick Start Guide BD	English	pdf	2019-07-11 16:28:04
	Economy Wi-Fi Kits Quick Start Guide BD	English	pdf	2019-07-11 16:26:58
	Smart Wi-Fi Kits Quick Start Guide	English	pdf	2018-09-03 08:40:56
	Smart Wi-Fi Kits Quick Start Guide BD	English	pdf	2018-08-24 09:40:43
	Economy WiFi Kits Quick Start Guide	English	pdf	2018-06-19 16:37:07
	Non-economical WiFi Kits Quick Start Guide	English	pdf	2018-06-19 16:36:55
XVR Kits	XVR Kits Quick Start Guide BD 5.0	English	pdf	2020-07-17 16:27:25
	XVR Kits Quick Start Guide BD	English	pdf	2019-01-07 17:10:53
	Smart XVR Kits Quick Start Guide BD	English	pdf	2018-08-24 09:41:18
	XVR Kits Quick Start Guide	English	pdf	2018-06-19 16:40:16
	Smart XVR Kits Quick Start Guide	English	pdf	2018-06-19 16:40:02
Consumer WiFi Camera	LongPlus Quick Start Guide	English	pdf	2021-03-17 14:26:03
Consumer WiFi Camera	Consumer Fisheye Camera P3 Quick Start Guide	English	pdf	2018-06-19 16:40:37
PoE Switch	HT812(100M&1000M) HT811 HT412 HT1612 Series PoE Switch Quick Start Guide	English	pdf	2019-04-03 08:53:12
	RT2418 Managed Optical Fiber PoE Switch Quick Start Guide	English	pdf	2018-11-06 14:23:13
	24+2+2 Unmanaged Optical Fiber PoE Switch Quick Start Guide	English	pdf	2018-06-19 16:41:30
	24+2 Managed PoE Switch Quick Start Guide	English	pdf	2018-06-19 16:40:56
Search Tool	Search Tool User Manual for Win&Mac	English	pdf	2018-06-19 17:03:49
App	iVMS380 App User Manual	English	pdf	2020-11-09 14:52:33
	Aliluya App User Manual	English	pdf	2020-08-03 15:24:55
	iVMS350 App User Manual	English	pdf	2020-08-03 15:24:20
	ACESEE App User Manual	English	pdf	2019-09-02 10:10:19
	iVMS320 App User Manual	English	pdf	2019-01-16 09:59:10
	BitVision App User Manual	English	pdf	2018-12-20 17:21:30
	FreeIP App User Manual	English	pdf	2018-06-19 16:42:20
	VR Panorama App User Manual	English	pdf	2018-06-19 16:42:05
VMS	iVMS330 Plateform User Manual for windows	English	pdf	2020-11-09 15:06:16
	iVMS320 User Manual for Mac	English	pdf	2019-04-15 15:28:59
	iVMS320 Plateform User Manual for win	English	pdf	2019-04-15 15:28:02
	VMS User Manual for Mac	English	pdf	2018-06-19 16:48:21
	VMS User Manual for Win	English	pdf	2018-06-19 16:48:06
	VMS Lite User Manual for Mac	English	pdf	2018-06-19 16:45:35
	VMS Lite User Manual for Win	English	pdf	2018-06-19 16:45:24
Coaxial	Camera Quick Installation Guide(Split Type)	English	pdf	2019-11-01 15:35:23
Smart Device	Smart Device 2000 Quick Start Guide 02GYWT	English	pdf	2021-04-20 14:51:30
	Smart Device 2000 Quick Start Guide 02GYT	English	pdf	2021-04-20 14:50:55
	Thermal Smart IP Camera Quick Start Guide BMMH256	English	pdf	2021-04-07 19:10:11
	Dual Smart IP Camera Quick Start Guide BD BMMH32	English	pdf	2021-04-07 19:08:54
	AI BOX Quick Start Guide 5.0	English	pdf	2021-03-30 10:35:09
	Thermal Smart IP Camera Quick Start Guide	English	pdf	2021-03-09 14:58:56
	AI Face Recognition Device User Manual	English	pdf	2020-12-25 11:02:19
	AI Face Recognition Device Quick Start Guide 05GRW	English	pdf	2020-12-14 09:24:26
	AI Face Recognition Device Quick Start Guide 05GR	English	pdf	2020-12-12 14:45:36
	Thermal Smart IP Camera Quick Start Guide OWL256	English	pdf	2020-11-24 10:20:05
	Dual Smart IP Camera Quick Start Guide BD OWL32	English	pdf	2020-11-24 10:19:21
	Thermal Smart IP Camera User Manual	English	pdf	2020-11-04 09:13:13
	Thermal Smart IP Camera Quick Start Guide CMLDISS500T-256	English	pdf	2020-11-04 09:12:37
	Temperature Measuring Metal Detector Security Gate BD CMLDISS500T	English	pdf	2020-11-04 09:11:47
	Smart Device 2000 Quick Start Guide 03AY	English	pdf	2020-11-04 09:09:55
	Smart Device 2000 Quick Start Guide 03AYW	English	pdf	2020-08-03 15:13:17
	Smart Device 2000 Quick Start Guide 02GY	English	pdf	2020-08-03 15:11:47
	Smart Device 2000 Quick Start Guide 02GYW	English	pdf	2020-08-03 15:10:26
	Smart Device 2000 Quick Start Guide 02GYH	English	pdf	2020-08-03 15:08:36

BitVision

Channels	Version Info	Time	Download Url
BitVision	BitVision_Android_V20.1.46.1	2020-11-13 09:38:58

ACESEE

Channels	Version Info	Time	Download Url
ACESEE	ACESEE_Android_V1.0.2	2021-05-07 17:34:23
ACESEE	ACESEE_PC(Windows)_V1.0.0.10	2021-05-07 17:33:41

iVMS350

Channels	Version Info	Time	Download Url
iVMS350	IOT_iVMS350_Android_V21.1.05.3	2021-01-28 13:32:52
	IOT_iVMS350_Android_V20.1.41.4	2021-01-14 08:28:39
	IOT_iVMS350_Android_V20.1.39.1	2020-09-29 09:37:17
	IOT_iVMS350_Android_V20.1.36.4	2020-09-15 16:59:00

LongPlus

Channels	Version Info	Time	Download Url
LongPlus	LongPlus_Android_21.1.16.2	2021-04-25 11:57:28
LongPlus	LongPlus_Android_V20.1.22	2021-02-05 09:32:08

The post HEROSPEED New All Firmware Software Tools Download first appeared on NVR IPCAMERA SECURITY.

Milesight How to new firmware

M.Salih ASLAN — Wed, 05 May 2021 21:00:17 +0000

1. What is New Firmware ?

The new firmware will be used from 7X.9.0.X, which makes the NVR experience faster, more responsive, more stable and more delightful. And lots of optimization are based on it.

2. Disk Settings

Ensure your NVR has been installed and the HDD has been initialized.

Please check it on ‘Storage’ -> ‘Disk’ interface. When the HDD is first installed on the NVR, you need to click ‘Initialize’ to initialize the HDD. When the status shows ‘Normal’, you can start recording settings.

3. Continuous Record Settings

If you want to configure continuous record, please refer to the following two ways.

(1) Configure on monitor:

a. Select ‘Storage’→‘Record schedule’.

b. Select channel and click ‘Continuous’ button.

c. Drag a square in the time table to set record effective time. It is convenient for you to set or clear all corresponding schedule by clicking “Select All” or “Clear All”.

Or you can click “Edit” to edit schedule. Select Day, Record Type and Time to finish editing.

(2) Configure on web:

a. Select ‘Storage’→‘Record schedule’.

b. Select channel and click ‘Continuous’ button.

c. Set the record schedule. It is convenient for you to set or clear all schedule by clicking “Select All” or “Clear All”.

After the configuration is complete, the NVR will start recording. You can directly refer to the steps in [5. Check recording files on playback interface] to view the video files.

4. Event Record Settings

If you want to configure event record, please refer to the following steps.

Step1. Record schedule settings

There are two ways to configure.

(1) Configure on monitor:

a. Select ‘Storage’→‘Record schedule’.

b. Select channel and set the record schedule.

You can drag a square in the time table to set record effective time. It is convenient for you to set or clear all corresponding schedule by clicking “Select All” or “Clear All”.

Or you can click “Edit” to edit schedule. Select Day, Record Type and Time to finish editing.

(2) Configure on web:

a. Select ‘Storage’→‘Record schedule’.

b. Select channel and then set the record schedule. It is convenient for you to set or clear all schedule by clicking “Select All” or “Clear All”.

Note:

1) If you set continuous record for a period of time, there will be continuous recording, and includes event recording during this time.

2) If you set event record for a period of time, there will be only event recording(including Motion Detection, Alarm and Smart Event) without continuous recording during this time.

3) If you set Motion Detection/Alarm/Smart Event record for a period of time, there will be only Motion Detection/Alarm/Smart Event recording without continuous recording during this time.

Step2. Alarm action settings

Take ‘Motion Detection’ as an example, there are two ways to configure.

(1) Configure on monitor:

a. Select ‘Event’→‘Motion Detection’.

b. Select channel , Sensitivity and enable Motion Detection. Set the area for triggering motion detection.

c. Set Effective Time of motion detection by clicking “Edit”(Effective Time). It will be more convenient by clicking “Select All” or “Clear All” to set or clear all time settings.

d. You can also click “Edit”(Action) to set other alarm actions, such as Audible Warning, Email Linkage, Event Popup, Alarm Output and so on.

(2) Configure on web:

a. Select ‘Event’→‘Motion Detection’.

b. Select channel , Sensitivity and enable Motion Detection. Set the area for triggering motion detection.

c. Set Effective Time of motion detection by clicking “Edit”(Effective Time). It will be more convenient by clicking “Select All” or “Clear All” to set or clear all time settings.

d. You can also click “Edit”(Action) to set other alarm actions, such as Audible Warning, Email Linkage, Alarm Output and so on.

Note:

Effective Time is enabled by default. As long as this schedule is enabled, the NVR can receive alarms from the camera side. If you want to customize the time that the NVR receives alarms from the camera side, you can manually edit Effective Time.

After the configuration is complete, the NVR will start recording. You can directly refer to the steps in [5. Check recording files on playback interface] to view the video files.

5. Check the recording status

After the configuration is complete, you can check the recording status on Live View interface and Status interface.

(1) Check on monitor:

① Check on Live View interface

If there is an icon as first one displayed in live view, it indicates that the current channel is recording.

If there is an icon as second one displayed in live view, it indicates motion detection alarm.

If there is an icon as third one displayed in live view, it indicates smart event alarm and alarm input.

② Check on Status interface

Go to ‘Status’ -> ‘Camera Status’ interface, if the current channel is recording, it will show “On” on record bar.

Go to ‘Status’ -> ‘Event Status’ -> ‘Camera Event’ / ‘Alarm’/ ‘Smart Event’ interface, you can check Camera Event here, including Motion Detection, Smart Event and Alarm Input. The icon will turn into red when the corresponding alarm is triggered.

(2) Check on web:

① Check on Live View interface

If there is an icon as below displayed in live view, it indicates motion detection alarm.

② Check on Status interface

Go to ‘Status’ -> ‘Camera Status’ interface, if the current channel is recording, it will show “On” on record bar.

6. Check recording files on playback interface

Select ‘Menu’→‘Playback’ interface, there are two ways to check recording files.

(1) Playback on monitor:

General Playback:

a. Select General Playback as playback type.

b. Select Stream Type and channels you want to do playback.

c. Select date, the day with blue and red letters means that there are record files.

d. Every channel will get their own file bar.Currently there will only display continuous recording with blue file bar on the general playback interface as shown below.

Note:

If you want to check event recording, please check [Event Playback] as shown below.

Event Playback:

a. Select Event Playback as playback type.

b. Select Stream Type and channels you want to do playback.

c. Select Event Type.

d. Select Start Time and End Time, click “Search” to search the record.

e. Click “Search”, It would list all videos on the right side of the playback interface.

f. Set pre playback and post playback time, then play the video by clicking “Play” button.

There will display event recording with red file bar on the event playback interface as shown below.

(2) Playback on web:

a. Select Stream Type and channels you want to playback.

b. Select date, only the day with a red mark means that there are recorded files. Click “Play” button to play.

c. The tool bar can display continuous and multi-event record. It shows that in this record period what kind of event has happened. The symbolic meaning of each color is shown below:

Blue — Continuous

Red — Event, including Motion Detection, Alarm, Smart Event.

The post Milesight How to new firmware first appeared on NVR IPCAMERA SECURITY.

AEEYE Smart NVR 2.0 installation guide

M.Salih ASLAN — Sun, 02 May 2021 00:38:28 +0000

Welcome to use our company’s network video recorder (NVR) products. For your secure using,
please read this user manual carefully. The following contents are about the proper use of the product,
the prevention of danger and loss of property etc. Please be sure to abide.
1. Installation Environment:

Please place and use this product in the environment with temperature 0℃-50℃;
The device should be placed horizontally when it is being installed and used, avoid lean or
inversion;
Do not place or install it in the high temperature, wet, dusty and sooty places.
Keep the device away from water drop or plash. Don’t put any object with liquid inside like flower
vase or any other object on the device.
To ensure the normal heat dissipation of the device, there is a fan installed inside the device. The
device should be installed in well-ventilated environment;
The back of the NVR should be away from other devices or the wall above 6cm in order to
release heat;
If the device is used in the regions with much thunder, please install lightning protection device to
avoid host or hardware breakdown by lightning stroke.
2. Attentions
Do not touch the power switch and the NVR by wet hands or wet objects, in order to avoid
electric shock;
After installing the host, please make sure that the host and the chassis are connected to the
ground in order to avoid video and audio signal interference and damaged by static electricity;
Ensure the voltage stability of the power supply of the NVR. Use the power input with stable
voltage value and little wave interference rather than shutdown the NVR by disconnecting the
main switch directly;
Do not drop any liquid or metal on the NVR in case short circuit inside or fire;
The device does not include any hard disk, and you need to properly install the hard disk before
using it, otherwise, you cannot record and playback the video;
The dust on the mainboard will cause short circuit when it is damp. In order to ensure the
long-term normal working, you should regularly deduct the mainboard, connectors, chassis, fan
and so on by a brush;
Do not disconnect the power switch directly when you want to shutdown the NVR. You should
use the shutdown button on the panel in order to avoid damage to the hard disk;
The device system supports HDD format function. If the HDD has been used, please take note
that if it is with FAT 32 format. This NVR only supports HDD with FAT 32 format;
Do not open the device when it is connected with electricity;；
To ensure the integrity of the recording data, please replace the hard disk when it is damaged
(there is disk error record in the log information).
3. Note:
The user manual is for reference only. The real object is the standard;
The products will be updated at any time. It is subject to update without notice.
Please contact our technical department for the latest programs and additional documentation.
If there is any doubt or dispute, our company reserves the right of final explanation.
This user manual offer references to multi-series products. The specific operation of each product will
not be listed one by one. Please contact our technical department when you have any question.

[message title=”Download PDF” title_color=”#000000″ title_bg=”#dddddd” title_icon=”” content_color=”#000000″ content_bg=”#ffffff” id=””]Quick Guide[/message]

The post AEEYE Smart NVR 2.0 installation guide first appeared on NVR IPCAMERA SECURITY.