How do I integrate Hanwha IP cameras and SUNAPI with Immix?

Summary

This article details the steps to integrate Hanwha IP cameras and SUNAPI with Immix.

Integrate Hanwha with Immix

To begin the integration, a suitable port for Immix must be located.

NOTE: These are default ports only (they can be configured and may be
different to what is listed).

To find ports in Immix:

Configuring Users in Hanwha Vision for Immix

To configure users:

Video Profile

The integration has capabilities to switch between different video profiles. To switch between profiles:

Configuring a Hanwha IPC SMTP Alarm

To configure the alarm into Immix:

S# – represents the ServerID.
A# – represents the Input of Response.
E# – represents the Event Number associated with the Server Type,
e21 is defaulted to IPC Object Detection.

IPC Email Example

Subject: ObjectDetected

Sendor: S29.a1.e21@ImmixAlarms.com To: S29.a1.e21@ImmixAlarms.com

Date: 20240514-12:03:47XMailer:NFMail

https://support.immixprotect.com/hc/en-us/articles/25738891242395-Hanwha-IP-Camera-SUNAPI-Integration 4/7
XMailer: NF Mail MIME-Version: 1.0 Content-Type: multipart/mixed; boundary=594786580.1111.samsungipolis.com –594786580.1111.samsungipolis.com Content-Type: text/plain; charset=”iso-8859-1″ Content-Transfer-Encoding: 7bit ObjectDetected Time : 20240514-12:03:47 Camera IP : 192.168.1.166 Event Type : EventRule_5_CH1 –594786580.1111.samsungipolis.com Content-Type: application/octet-stream; Content-Transfer-Encoding: base64 Content-Disposition: attachment; /9j/4AAQSkZJRgABAQEAYABgAAD/2wBDABQODxIPDRQSEBIXFRQYHjIhHhwcHj0s LiQySUBMS0dARkVQWnNiUFVtVkVGZIhlbXd7gYKBTmCNl4x9lnN+gXz/2wBDARU

Enabling Digest Auth

If you are having trouble using GetConfig, enable Digest Auth for your Hanwha user.

The image below shows where to enable this:

NOTE: Ensure that the user is Admin or Full user permissions. You must
create an Immix user and assign them as an administrator. A default
admin account cannot be used.

Configuring a Hanwha IPC SMTP Event

To configure the system-based events into Immix:

Obtaining the S Number

To obtain the S number:

Configuring Devices within Immix

To configure a device within Immix:

Obtaining the ID of a Camera for Use in the Extra Value

To obtain the ID of the camera:

SSL Error Alarms

By default, the alarm receiver is configured to disallow insecure connections. To allow connections to insecure devices (no SSL, invalid cert, etc.), change the RequireCertificate config key in appsettings.json to false.

Alarms Not Decoding

By default the alarm JSON messages are saved in the file store in the same folder as any alarm footage. To diagnose decoding issues, confirm that this message is what is expected. A typical alarm message looks like the following snippet. Alarm messages always have the broadcastAction alarm.

{
“Tran”: {
“Command”: “broadcastAction”,
“Params”: {
“Params”: “eyJhY3Rpb25JZCI6InthYWNiMjdmOC1lYTcwLTRlOGEtOGE1YS03YjZiNzk5ZTliMGR9IiwiYWRkaXRpb25hbFJlc291cmNlcyI6WyJ7MDAwMDAwM
“RuntimeParams”: “eyJkZXNjcmlwdGlvbiI6Il90aHVtYl9kb3duIiwiZXZlbnRSZXNvdXJjZUlkIjoie2RhZWU5ZWIyLTEyZDYtZTUwNy00Y2MxLWM4ZmUxNG
}
}
}

A second approach is to review the service logs, as all messages (even non-alarm messages) are logged there.

How to use Wisenet cameras with exacqVision

Summary:

This article provides information on using Wisenet cameras with exacqVision.

Step By Step Guide:

Wisenet Camera Settings

Mandatory

The following settings are mandatory:

Optional

The following settings are optional:

After Adding to exacqVision

exacqVision defaults to using the Hanwha default H.264 stream (profile 2) but can be changed to H.265. This changes exacqVision to utilize the default H.265 stream on the camera (profile3).

NOTE: It is not possible to set h.265 via exacqVision on a fisheye camera.
You need to log in to the camera interface and manually change the FISHEYE
profile to H.265.

To change the default stream to H.265:

1.Navigate to the exacqVision Camera Settings page and click the Recording tab.
In the Rate Control field, the default is Constant Quality which equates to Variable Bit Rate in Hanwha cameras.

The Quality slider default of 2 sets a low cap.
1 = minimum VBR cap for that stream
10 = maximum VBR cap for that stream
For 4MP+ resolution cameras it is beneficial to increase the quality to 3 or 4; otherwise, the video may be compressed too much thus decreasing quality.

2.If needed, select a stream to add from the Multistreaming dropdown menu and click Add Stream.

NOTE: With high-resolution cameras, it is best practice to create lower
resolution live viewing streams to save on decoding and bandwidth. These
streams can be added in exacqVision on the Camera Settings page.

3.Click the Motion tab to edit motion on the camera (although exacqVision does not have all the options available that are in the Hanwha cameras).

NOTE: It is possible to add motion, including windows, without adding\
multiple points to create unique shapes.

4.Click the Analytics tab to see several options for displaying and recording data.

5.If the camera is a fisheye, click the Digital PTZ/Fisheye tab to configure the proper dewarp code.
a. Select Immervision from the first dropdown menu.

b. Select the proper code from the second dropdown menu.

Refer to the following article for Hanwha Fisheye Lens Codes: Immervision Fisheye Dewarp Lens Codes

c. Select how the camera is mounted for proper dewarping from the third dropdown menu.

NOTE: Many of Hanwha’s fisheye cameras can use additional camera side dewarp
channels. These should be created first before the camera is added to
exacqVision, so they are identified and configurable inside of exacqVision.
These channels have no motion detection so they either need to record 24/7
or be used for live video only.

NOTE: The Video tab does not exactly match what is in the camera.

Brightness = Brightness
Contrast = Contrast
Saturation = Color Level in the camera
Wide Dynamic Range = controls SSDR in the camera
Video Mask = controls the camera’s Privacy Areas

Searching AI Metadata

To search AI metadata:

1.From the exacqVision home page, click the Search () icon in the top left corner of the screen.

2.Expand the camera tree then select the camera and the analytic metadata associated with it.

3.Select the Search Range to search for then click Search.

4.Click the Paper () icon to view the raw metadata.

A pane to the right of the video will appear with the raw data of that time.

5.Check the Show Filters checkbox to filter data.

6.In the pane to the left of the video, check the checkboxes to filter.

7. Click Save then click the Search button again.

NOTE: Save filters can be selected from the dropdown menu at the top.

8.If certain overlays for the metadata need to be hidden, click the Green () icon and select which overlays should be hidden.

Creating Events Based on Analytics

NOTE: The analytics must be configured in the camera first. Once done and the
camera is added to exacqVision, disable and re-enable the camera.

To create events based on analytics:

Monitoring Analytic Events

To monitor analytic events, follow the steps in the Creating Events Based on Analytics section. However, use Event Monitoring instead of Event Linking.

Special Considerations

Take the following into consideration when setting up a camera:

Optional Common Camera Settings

The following camera settings are optional:

Verint recorders using different FPS for normal and event recording

Summary:

When a Hanwha camera is registered to a Verint NVR, the use of different FPS can be engaged on the NVR

Explanation of Behavior:

Resolution:

• Firmware can be easily updated via the NVRs web interface, the NVRs monitor/mouse interface, Wisenet Device Manager, or Wisenet Viewer. The process takes approximately 5 minutes.

• The way Verint operates is that the recorder will dictate the camera’s FPS, and changing the video profile on the camera, by default, momentarily drops and reestablishs the connections.

How to add a Wisenet camera to Genetec Security Center 5.9

Summary:

This article provides instructions for adding a Wisenet camera to Genetec Security Center 5.9 and the additional steps needed if the camera has a fisheye lens.

Step By Step Guide:

To add a Wisenet camera to Genetec Security Center 5.9:

1.Open Wisenet Device Manager.

2.Double-click your camera to load the camera’s webpage.

3.Enter and confirm your new password, then click Apply.

NOTE: If a password has already been configured and you need to default
the camera, press and hold the Reset button for 5-10 seconds.

.

4.From the Genetec Config Tool application, click the Video icon.

5.Right-click Archiver and select Unit enrolment.

6.Click Manual add then select Hanwha Techwin from the Manufacturer dropdown menu, select Wisenet from the Product type dropdown menu, and enter the IP address of the camera.

NOTE: You can find the IP address of the camera in the Wisenet Device
Manager results screen. Click Add and close to enroll the camera.

TIP: If you see a Bad logon error, move your mouse over the text and an Add button will appear.

Enter the username and password of the camera then click the Add button.

After a few moments the status should change to Added.

.

NOTE: Sometimes the status in Genetec sticks on Bad logon. To resolve this
issue, click Clear All at the bottom of Unit enrollment and add the camera
again. The camera has now been added to Genetec Security Center 5.9.

Configuring a Fisheye Camera

The following additional steps are required if the camera has a fisheye lens:

1.From the Video tab, select the newly added camera under Archiver then click Hardware and edit the Lens type.

2.Select your Camera position from the dropdown menu.

NOTE: Genetec may not automatically pick the correct lens type and
could fail to calibrate.

3.Select the correct Lens Type from the dropdown menu.

4.Click Ok and Apply at the bottom of the page to save changes.
The fisheye camera settings are now complete.

Viewing the Newly Added Camera

To view the newly added camera:

1.Open the Security Desk application from the Windows Start menu.

2.Log in and and select Monitoring.

3.Double-click the newly added camera to see live video.

4.Use the scroll wheel on the mouse or click the Viewing Mode icon to manipulate the image.

Genetec – Adding a Hanwha Camera to Genetec 5.7 or later

Summary:

This article will provide a step-by-step guide for adding a Wisenet camera to Genetec.

Step By Step Guide:

1. Open the Config Tool (Figure 1)

Figure 1

2. Click on the green plus symbol (Figure 2)

3. Select Video Unit (Figure 2)

Figure 2

4. Select Hanwha as the manufacturer (Figure 3)

5. The IP Address can be a single device or a range of devices. (Figure 3)

6. Provide the proper credentials and click “Add and close” or “Add.” Then, repeat for further units. (Figure 3)

Figure 3

7. Once added to the system, you will be able to view the stream from the Video Unit (Figure 4)

Figure 4

How do calibrate a Hanwha Fisheye Camera for use on a Genetec VMS?

Applies to Models: XNF, SNF, and QNF Series Cameras

Summary:

This article describes how to add a Hanwha Fisheye camera to Genetec, by set a lens code and calibrate the camera.

Note: The lens code will be determined by the model.
See this article for a complete list of codes.

Step By Step Guide:

1. Open the Config Tool, go to Video Unit.

2. Select the Video Unit in question.

.

3. Select the Hardware Tab of the Fisheye camera to be configured.

4. Set the Lens Type to Panamorph.

.

5. Click the Pencil to the right of the Panamorph dropdown.

.

6. Set the orientation to either ceiling or wall.

7. Select the proper Lens Type  from the list (See De-warp Code article link below.)

8. Click calibrate once the code is registered.

Note: If it fails check the motion detection tab for an improperly configured Event or
Motion Schedule.

Click here for Immervision De-warping codes

.

<p>The post How to use Wisenet cameras with 3rd party VMS first appeared on NVR IPCAMERA SECURITY.</p>

This article is for the Arlo Secure experience with Library. If you have the Arlo Secure experience with Feed, visit: How to set up Arlo Cameras – Arlo Secure 4.0

This article applies to Arlo Ultra, Arlo Ultra 2, Arlo Pro 3, Arlo Pro 4, and Arlo Essential Wire-Free series cameras. To connect and install other Arlo devices, visit the links under: Set up other Arlo devices

For the best results use the Arlo Secure App for Arlo camera setup.

An Arlo SmartHub or Base Station is required for Arlo Pro 3, Arlo Ultra, and Arlo Ultra 2 cameras. To check compatibility, visit: Arlo SmartHub and Base Station Compatibility

An Arlo SmartHub or Base Station is optional for Arlo Pro 4 and Arlo Essential wire-free series cameras. For more information, visit: What are the benefits of using an Arlo SmartHub or Base Station?

To set up your camera using a SmartHub or Base Station:

Note: Arlo Ultra, Ultra 2, and Pro 3 must be installed using an Arlo SmartHub or Base Station.

Note: If an Arlo SmartHub or Base Station is not installed, tap Add New SmartHub.

Plug the Ethernet Cable into your SmartHub or Base Station and tap Continue.

Plug the AC adapter into the wall outlet, make sure the lights on the Arlo SmartHub or Base Station turn on, and tap Continue.

If you have trouble connecting the Arlo SmartHub or Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?

Note: Make sure the camera is within 3 to 6 feet of your Arlo SmartHub or Base Station during the setup process. Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.
If the search is taking too long, tap Manually Pair Device. Press the Sync button on the camera and tap Continue.

To set up Arlo Pro 4 or Arlo Essential wire-free cameras directly to your Wi-Fi:

How to set up Arlo Cameras – Arlo Secure 4.0

This article applies to:

VMC5040  VMC4040P  VMC4041P  VMC4050P  VMC4060P  VMC2020  VMC2030  VMC2032

This article is for the Arlo Secure App experience with Feed. If you have the Arlo Secure App experience with Library, visit: How to set up Arlo Cameras

This article applies to Arlo Ultra, Arlo Ultra 2, Arlo Pro 3, Arlo Pro 4, Arlo Pro 5S, and Arlo Essential Wire-Free series cameras. To connect and install other Arlo devices, visit the links under: Set up other Arlo devices

Need Help?

If you need help installing your new Arlo device, you can reach Arlo Support via the Need Help? button in the Arlo Secure App or on my.arlo.com.

Notes:

An Arlo SmartHub or Base Station is required for Arlo Pro 3, Arlo Ultra, and Arlo Ultra 2 cameras.

An Arlo SmartHub or Base Station is optional for Arlo Pro 4, Pro 5S, and Arlo Essential Wire-Free series cameras.

Arlo SecureLink is a technology that uses the sub-GHz wireless communication to communicate between Arlo devices. The Arlo Security Keypad Sensor Hub uses Arlo SecureLink to talk with devices such as the Arlo All-in-One Sensor and the Arlo Pro 5S Camera.

To set up an Arlo camera with an Arlo SmartHub or Base Station:

Note: Arlo Ultra, Arlo Ultra 2, and Arlo Pro 3 must use an Arlo SmartHub or Base Station.

1.Launch the Arlo Secure App.

2.Tap Devices.
Note: Make sure the correct Location where you want to add the camera is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap .

4.Tap Cameras.

5.Tap Ultra, Pro, or Essential.

6.Select your camera.

7.Select an Arlo SmartHub or Arlo Base Station.
Note: If an Arlo SmartHub or Base Station is not installed, tap Add New SmartHub.
Plug the Ethernet Cable into your Arlo SmartHub or Base Station and tap Continue.
Plug the AC adapter into the wall outlet, make sure the LEDs on the Arlo SmartHub or Base Station turn on, and tap Continue.
If you have trouble connecting the SmartHub or Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?

8.Insert the battery into the camera, and tap Continue.
Arlo will begin looking for your camera.
Make sure the camera is within 3 to 6 feet of your Arlo SmartHub or Base Station during the setup process.
Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.
If the search is taking too long, tap Manually Pair Device.
Press the Sync button on the camera and tap Continue.

9.Name your Arlo camera and tap Continue.

10.Position your Arlo camera and tap Continue.

11.Tap Finish.
Note: Your camera will be added to Arm Away mode after installation where Motion Detection, Recording, Variable Length recording is enabled. For more information, visit About Arlo Routines, Modes, Rules, and Automations

To set up Arlo Pro 4, Arlo Pro 5S, or Arlo Essential wire-free camera directly to your Wi-Fi router:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap .

4.Tap Pro or Essential.

5.Select your camera.

6.Select Connect without SmartHub and tap Continue.

7.Check your mobile device settings to ensure you are connected to a 2.4 GHz network.
Note: Arlo Pro 5S cameras work with 2.4 GHz and 5 GHz frequency bands after installation is complete on 2.4 GHz. For more information, visit: How does the Arlo Pro 5S Camera use 5GHz Wi-Fi networks?

8.Return to the Arlo Secure App and tap Continue.

9.Enter your Wi-Fi SSID (Network Name) and Password.

10.Tap Continue.

11.For Arlo Essential wire-free cameras:
Press and hold the Sync button on the bottom of the camera for two seconds.

12.For Arlo Pro 4 and Arlo Pro 5S:
Insert the battery into the camera and tap Continue.
When the LED on the front of the camera is blinking blue, tap Continue.
If the LED is not blinking blue, tap LED is not blinking blue.
Press and hold the Sync button on the inside of the camera and tap Continue.
When the LED begins blinking blue, tap Continue.

13.Hold the QR code about four to six inches in front of your Arlo camera.

14.When you hear a chime, tap Continue.
Note: If you are having trouble, visit: My Arlo camera will not scan the QR code during setup

15.Arlo will begin looking for your camera.
Make sure the camera is within 3 to 6 feet of your Wi-Fi router during the setup process.
Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.

16.Name your Arlo camera and tap Continue.

17.Position your Arlo camera and tap Continue.

18.Tap Finish.
Note: Your camera will be added to Arm Away mode after installation where Motion Detection, Recording, Variable Length recording is enabled. For more information, visit About Arlo Routines, Modes, Rules, and Automations

To set up other Arlo devices, visit:

For more information, visit:

To troubleshoot setup issues, visit:

How to set up the Arlo Pro and Pro 2 Camera – Arlo Secure 4.0

This article applies to:

VMC4030P  VMC4030

This article is for the Arlo Secure App with Feed. If you have the Arlo Secure App with Library, visit: How to set up the Arlo Pro and Pro 2 Camera

The following instructions apply to setting up the Arlo Pro or Arlo Pro 2 camera. To setup other Arlo camera models, visit: How to set up Arlo Cameras – Arlo Secure 4.0

To complete the Arlo Pro or Arlo Pro 2 setup process, you will need an Arlo SmartHub or Base Station. Install the Arlo SmartHub or Base Station first before installing your cameras. For more information, visit: How do I connect my Arlo SmartHub or Base Station to the Internet? – Arlo Secure 4.0

If you are setting up multiple cameras, only sync one camera at a time.

To set up an Arlo Pro or Pro 2 Camera:

1.Launch the Arlo Secure App.

2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap .

4.Tap Cameras.

5.Tap Pro.

6.Tap Pro 2 or Pro.

7.Select an Arlo SmartHub or Arlo Base Station. If only one Arlo SmartHub or Base Station is installed, tap Continue when Arlo has detected the device.
Note: If an Arlo SmartHub or Base Station is not installed, tap Add New SmartHub.
Plug the Ethernet Cable into your Arlo SmartHub or Base Station and tap Continue.
Plug the AC adapter into the wall outlet, make sure the LEDs on the Arlo SmartHub or Base Station illuminate, and tap Continue.
If you have trouble connecting the Arlo SmartHub or Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?

8.Insert the battery into the camera, and tap Continue.
Unlock the battery compartment by pressing the latch button and pulling back gently.
Insert the battery as shown and close the battery door.

9.Press the Sync button on the camera for about two seconds and then release the button.

10.When the LED on the camera is blinking Blue, tap Continue.

11.Arlo will begin looking for your camera.
Note: Make sure the camera is within 3 to 6 feet of your Arlo SmartHub or Base Station during the setup process. Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.
If the search is taking too long, tap Manually Pair Device. Press the Sync button on the camera and tap Continue.

12.Name your Arlo camera and tap Continue.

13.Position your Arlo camera and tap Continue.

14.Tap Finish.
Note: Your camera will be added to the  Arm Away mode after installation. Motion Detection, Recording, Variable Length recording are enabled. For more information, visit: About Arlo Routines, Modes, Rules, and Automations

How to set up the Arlo Wire-Free Camera – Arlo Secure 4.0

This article applies to:

VMC3030

This article is for the Arlo Secure App with Feed. If you have the Arlo Secure App with Library, visit: How to set up the Arlo Wire-Free Camera

The following instructions apply to setting up the original Arlo Wire-Free Camera (VMC3030). To setup other Arlo camera models, visit: How to set up Arlo Cameras – Arlo Secure 4.0

To set up the Arlo Wire-Free Camera:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap .

4.Tap Cameras.

5.Tap Others.

6.Tap Arlo.

7.Select an Arlo SmartHub or Arlo Base Station or tap Continue if only one Arlo SmartHub or Arlo Base Station is installed.
Note: If an Arlo SmartHub or Arlo Base Station is not installed, tap Add New Base Station.
Plug the Ethernet Cable into your Arlo SmartHub or Arlo Base Station and tap Continue.
Plug the AC adapter into the wall outlet, make sure the LEDs on the Arlo SmartHub or Arlo Base Station illuminate, and tap Continue.
If you have trouble connecting the Arlo SmartHub or Arlo Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?

8.Insert the batteries into the camera:

Unlock the battery compartment by sliding and holding the latch.

Insert the batteries as shown and close the battery door.

How to set up the Arlo Essential Indoor Camera – Arlo Secure 4.0

This article applies to:

VMC2040

This article is for the Arlo Secure App with Feed. If you have the Arlo Secure App with Library, visit: How to set up the Arlo Essential Indoor Camera

For best results, use the Arlo Secure App for Arlo Essential Indoor Camera setup.

An Arlo SmartHub or Base Station is optional.

Need Help?

If you need help installing your new Arlo device, you can reach Arlo Support via the Need Help? button in the Arlo Secure App or on my.arlo.com.

To set up the Arlo Essential Indoor Camera directly to your Wi-Fi router:

1.Launch the Arlo Secure App.

2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap .

4.Tap Cameras.

5.Tap Essential.

6.Tap Essential Indoor Camera.

7.Review the Meet your Arlo Essential Indoor Camera screen and tap Continue.

8.Find a location to place the camera that is near an outlet and within range of your Wi-Fi network.

9.Tap Continue.

10.Select Connect without SmartHub and tap Continue.

11.Check your mobile device settings to ensure you are connected to a 2.4 GHz network.

12.Return to the Arlo Secure App and tap Continue.

13.Enter your Wi-Fi SSID (network name) and Password.

14.Tap Continue.

15.Use the provided cable and power adapter to connect to an outlet, then plug the micro-USB portion of the cable into your camera.

16.Once the Privacy Shield on the camera opens, tap Continue.

17.Press the Sync button on the camera.

18.When the LED on the front of the camera is flashing blue, tap Continue.

19.Hold the QR code about four to six inches in front of your Arlo camera.
When you hear a chime, tap Continue.
If you are having trouble, visit: My Arlo camera will not scan the QR code during setup

20.Arlo will begin looking for your camera.
After the camera is found, name your Arlo camera and tap Continue.

21.Position your Arlo camera and tap Continue.

To set up the Arlo Essential Indoor Camera with an Arlo SmartHub or Base Station:

1.Launch the Arlo Secure App.

2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap .

4.Tap Cameras.

5.Tap Essential.

6.Tap Essential Indoor Camera.

7.Review the Meet your Arlo Essential Indoor Camera screen and tap Continue.

8.Find a location to place the camera that is near an outlet and within range of your Wi-Fi network.

9.Tap Continue.

10.Tap Continue to add your device to the Arlo SmartHub or Base Station.

11.Use the provided cable and power adapter to connect to an outlet, then plug the micro-USB portion of the cable into your camera.

12.Once the Privacy Shield on the camera opens, tap Continue.

13.Press the Sync button on the camera.

14.When the LED on the front of the camera is flashing blue, tap Continue.

15.Follow the in-app instructions to complete the setup.

How do I set up my Arlo Go 2 Camera? – Arlo Secure 4.0

This article applies to:

VML2030

This article is for the  Arlo Secure App experience with Feed. If you have the Arlo Secure App experience with Library, visit: How do I set up my Arlo Go 2 Camera?

Arlo Go 2 gives you the flexibility of using 2.4 GHz Wi-Fi or LTE for connectivity. You can also use LTE as a backup in case your Wi-Fi internet connection is interrupted.

Note: When using both 2.4 GHz Wi-Fi and LTE mode, Wi-Fi will always be the primary mode of connection.

Arlo Go 2 works with the same Arlo Secure App as all other Arlo cameras and devices. However, to connect your Go 2 camera to the mobile network, an activated SIM card with a mobile data plan must be inserted into the camera.

Note: We recommend that you charge the battery before mounting your camera. Your camera LED indicator light will blink amber if your battery needs charging. The indoor charging cable that came with your camera works with most power adapters.

Need Help?

If you need help installing your new Arlo device, you can reach Arlo Support via the Need Help? button in the Arlo Secure App or on my.arlo.com.

To set up your Arlo Go 2 camera using LTE only:

1.Launch the Arlo Secure App.

2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap .

4.Tap Cameras.

5.Tap Go 2.

6.Tap Continue.

7.Follow the instructions for installing your SIM card as shown on the Arlo Secure App and tap Continue.
For more information, visit: How do I install a SIM card in my Arlo Go 2 Camera?
The LED in front of your camera should blink blue. If the LED is not blinking blue, press the Sync button on the inside of your camera.

8.Tap Continue.

9.Hold the QR code in the Arlo Secure App, 4 to 6 inches in front of your camera.
You should hear a chime from your Arlo device. If you didn’t hear a chime, visit: My Arlo camera will not scan the QR code during setup

10.Tap Continue.

11.Name your Arlo camera and tap Continue.

12.Position your Arlo camera and tap Continue.

13.Tap Finish.

To set up your Arlo Go 2 camera with Wi-Fi:

Note: Before setting up your Arlo Go 2, make sure that your mobile device is connected to a Wi-Fi network. For more information, visit: How do I connect my mobile device to a 2.4 GHz Wi-Fi network to set up my Arlo camera?

1.Launch the Arlo Secure App.

2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap .

4.Tap Cameras.

5.Tap Go 2.

6.Tap Set Up with Wi-Fi.

7.Follow the instructions for installing your SIM card as shown in the Arlo Secure App and tap Continue.
Note: You may skip this step if you are not using a SIM card.
The LED in front of your camera should blink blue. If the LED is not blinking blue, press the Sync button on the inside of your camera.

8.Tap Continue.

9.Verify your mobile device is connected to a 2.4 GHz Wi-Fi network and tap Continue.

10.Enter your Wi-Fi credentials, then tap Continue.

11.Hold the QR code in the Arlo Secure App, 4 to 6 inches in front of your camera.
You should hear a chime from your Arlo device. If you didn’t hear a chime, visit: My Arlo camera will not scan the QR code during setup

12.Tap Continue.

13.Name your Arlo camera and tap Continue.

14.Position your Arlo camera and tap Continue.

15.Tap Finish.

If the Arlo Go 2 camera is installed too far from your Wi-Fi router, it may cause the battery to drain quicker. For more information, visit: How do I control whether my Go 2 Camera connects to Mobile or Wi-Fi?

<p>The post How to set up Arlo Cameras first appeared on NVR IPCAMERA SECURITY.</p>

1. Wi-Fi Range Extender:

2. Mesh Wi-Fi System:

3. Powerline Adapters:

4. Reposition Your Router:

5. Upgrade Your Router’s Antenna:

6. Consider a Wired Connection:

Important Tips:

Alternative

Extending WiFi coverage to support an outdoor wireless security camera requires ensuring a strong and stable signal in the camera’s location. Here are practical methods to achieve this:

1. Position the Router Strategically

2. Use a WiFi Extender or Repeater

3. Install a Powerline Adapter with WiFi

4. Upgrade to a Mesh WiFi System

5. Use a Dedicated Outdoor Access Point

6. Upgrade the Camera’s WiFi Antenna (If Removable)

7. Check for Interference

8. Switch to a Wired Connection

9. Test Signal Strength

Would you like guidance on selecting specific equipment or troubleshooting signal issues?

By considering these options, you can effectively extend your Wi-Fi range and ensure a reliable connection for your outdoor security camera.

Deploying outdoor WiFi is always necessary for deploying outdoor wireless security cameras. There are many options for extending WiFi. The optimal choice depends on the places and environments in that outdoor wireless cameras are installed.

There are two advisable solutions to extend the WiFi just around your house’s outdoor perimeter within 100 meters (300 feet). A network extension to the remote location farther than 300 feet will need a point-to-point wireless bridge.

1. Near Site WiFi Extension to the Outdoor Wireless Security Cameras (up to 100 meters or 300 feet)

It’s hard for WiFi signals to penetrate wire-filled stucco walls or stone walls. To provide strong WiFi outside for the outdoor cameras, one WiFi extender installed outdoors would avoid the stifling impact of walls on WiFi signals. There are two kinds of products—Powerline WiFi extenders and outdoor WiFi access points—to provide WiFi outside the home.

1.1 Near Site Outdoor WiFi for Cameras: Powerline WiFi Extenders

If you install your outdoor wireless camera under your eaves or in the backyard, plugging in a powerline WiFi extender around is an excellent way to solve the outdoor WiFi issues. As the powerline adapters are rated as indoor devices, a covered patio or waterproof electric box is needed to stand the harsh outdoor environments.

TP-Link TL-WPAxx series powerline wireless adapter kit is the easiest solution, providing two powerline adapters. One adapter installed indoors relays the data from the network cable to the power line. The second adapter broadcasts the WiFi signal to your cameras. Refer to the Outdoor Solution Guide for the installation tutorial and examples. The complete introduction of Powerline adapters will help you understand whether this solution is suitable for you.

1.2 Near Site Outdoor WiFi for Cameras: Outdoor WiFi Access Points

If your patio is not enclosed or the outdoor wireless cameras are installed further from your home, you may need an outdoor access point. TP-Link offers Omada EAP series omnidirectional outdoor access points for outdoor WiFi. They come with IP67 or IP65 waterproof and dustproof housing and a -30–70°C (-22–158°F) operating temperature range. They are designed to protect the outdoor access points against harsh outdoor conditions.

According to the areas of deploying outdoor cameras, there are two deployment methods. The basics are listed below. Refer to Get Outdoor WiFi with Outdoor WiFi Access Points for more details. Go to the Outdoor Solution Guide for the installation tutorial and examples.

1.2.1 WiFi Outside for Relatively Small Areas

One or two outdoor WiFi access points are deployed to connect the outdoor wireless cameras in relatively small areas. With the included passive PoE adapter, connect the Omada outdoor access points with your existing router to simultaneously provide data and power using a single Ethernet cable.

1.2.2 WiFi Outside for Relatively Large Areas

Several outdoor WiFi access points are deployed to connect outdoor wireless cameras across relatively large areas. The PoE switches or passive PoE adapters connect the Omada access points with a single Ethernet cable. Omada Mesh technology can wirelessly connect to the outdoor access points without additional cable if some access points cannot link to LAN ports. With Mesh technology, the maximum distance of extending outdoor WiFi can be multiple hundreds of meters.

2. Remote Site Network Expansion (More than 100 m and up to 30 km)

You can use the Pharos CPE series directional outdoor wireless antennas to build a wireless bridge to expand the network for miles. It is perfect for remote surveillance systems covering vast areas. You can also broadcast the wireless signals with an additional wireless access point on the remote site when necessary.

Refer to Pharos Solution to discover what Pharos products can bring. Go to the Outdoor Solution Guide for the installation tutorial and examples of Pharos wireless products. Refer to How to Connect Your Cameras from a Long Distance for using fibers to connect remote cameras.

3. Summary of Extending WiFi to Outdoor Wireless Security Cameras

So, ready to install your outdoor wireless cameras and choose the best outdoor WiFi solution. Let us know your idea about the outdoor WiFi on social media with #tplinkoutdoor!

Related Tags :

“best long range wifi extender for outdoor security camera with thick walls”, “how to extend wifi signal to outdoor camera 100 feet away”, “how to weatherproof a wifi extender for outdoor use”, “outdoor wifi extender with ethernet port for wired camera connection”, “best mesh wifi system for extending wifi to outdoor cameras”, “how to connect wifi extender to Arlo/Ring/Nest outdoor camera”, “troubleshooting wifi connection issues with outdoor security camera”,

“improving wifi signal strength for outdoor camera in remote location”, “how to avoid wifi interference for outdoor security cameras”, “using a point-to-point wifi bridge for long distance outdoor camera connection”, “extending wifi to a detached garage for security camera without running wires”, “best outdoor wifi solutions for rural areas with weak internet connection”, “how to choose the right wifi extender for your outdoor security camera setup”

<p>The post How to Extend WiFi for the Outdoor Wireless Security Camera first appeared on NVR IPCAMERA SECURITY.</p>

What to do When Your Camera is Offline

The Solink support team is ready to help. Our team works with your location(s) to troubleshoot camera issues so that you can get back to recording as soon as possible. To do this, we check the following, based on your camera type:

Troubleshoot Offline Camera

IP Cameras: What to Look For

Solink support can identify what type of camera you have. IP cameras usually have one Ethernet cable connected to the camera.

These types of cameras optimize connection by getting power (Power over Ethernet, or POE for short) and transmitting data (sending data to the Solink system) over a single cable. A typical IP camera and Ethernet connection looks like this:

An Ethernet cable’s end looks like this:
​

Each camera will have an Ethernet cable that connects into a POE switch. In most environments, the switch will look similar to the following:

How to Troubleshoot an Offline IP Camera

Once you have found the POE switch, ensure that:

.

Analog Cameras – What to Look For

Solink support can identify if your cameras are analog. Analog cameras usually have 2-3 cables attached – one for power, one for video signal, and one (optional) for an audio signal.

The different cables look similar to the following image:
​

If your cameras are analog, Solink supplies an analog encoder to your location. This device converts the old analog signal into digital so that we can record it properly on our system. A standard analog encoder is displayed in the following image:

Your analog camera video cables are connected to the rear side of the encoder.

The power cables for your analog cameras are usually wired to a CCTV power supply box, or are plugged into a UPS. The image below displays an example of a CCTV power supply box:

​

How to Troubleshoot an Offline Analog Camera

If an analog camera is offline, you will either see NO VIDEO text on the Solink interface (and Live Monitor, if applicable), or a black screen for some models. In this case, check the following:

.

Status of the Solink Software

Solink support can help confirm that there are no issues with the Solink interface itself that would cause a camera to stop recording. Please feel free to reach out to us at any time to confirm if there are any issues.

Troubleshoot Live Monitor

Troubleshoot Live Monitor

Is your live monitor down? Use this guide to troubleshoot.

If you encounter any of the following issues, please read the instructions in this section to attempt to troubleshoot the issue or reach out to our support team via live chat, phone or email.

No Input/Blank Screen

If the live monitor displays no input or a blank screen, try troubleshooting the issue with the following steps:

1.Check if the recording device is turned on. If not, turn the device on (this could take up to 10 minutes). The photos below display two different models of the recording device, for reference:

2.

2. If the recording device is on but the live monitor is still not working, ensure the cables are connected correctly; you should have an HDMI cable connected to HDMI port 1 or port 2. Additionally, follow the cord and ensure that it is securely plugged in to your monitor as well.

3. Reboot the HDMI/VGA adapter (the device shown in the following image). To reboot this device:

TurboNAS Login Screen

Please let the support team know if this screen is displayed. Use live chat or send the team an email at How To Setup Nas For Hikvision Ip Camera

Frozen Cameras

If any cameras are frozen on your live monitor, try the following steps to troubleshoot the issue:

<p>The post Troubleshoot Offline Camera first appeared on NVR IPCAMERA SECURITY.</p>

Learn About Active Deterrent Security Cameras

What Are Active Deterrent Security Cameras?

Active deterrent security cameras aren’t your typical security devices. They integrate advanced technology to proactively prevent criminal activities. Key features include built-in lights, sirens, sounds, and two-way audio.

The Importance of Active Deterrent Security Cameras

You might be wondering, why go the extra mile with these advanced features? Well, the answer is simple: prevention is better than cure. These cameras are designed not just to record incidents but to prevent them altogether.

Crime Prevention

A well-placed security camera can make all the difference. Thieves and intruders are less likely to target a property laden with visible deterrents.

Enhanced Safety

Knowing that your premises are being actively monitored can make you feel safer. Immediate alerts and real-time communication add an extra layer of safety.

Peace of Mind

There’s nothing like the peace of mind that comes from knowing your loved ones and valuables are secure. Active deterrent cameras provide a constant layer of security, ensuring you sleep a little easier at night.

Key Components of Active Deterrent Security Cameras

SIREN AND SPOTLIGHT

Active Deterrence security cameras can activate a loud siren with flashing light or spotlight when motion is activated to deter any potential threats. The light and sound features can be easily customized to meet your specific needs. These cameras are equipped with both traditional infrared night vision and LED spotlight mode for full color images at night when desired. Further, you can set the motion detection to trigger only when humans and/or vehicles are detected to produce the most accurate motion alerts.

Lights

These cameras often come with powerful LED lights that can illuminate large areas. Imagine being able to light up your entire driveway or backyard!

Siren

An ear-piercing siren can scare off even the most determined criminals. As soon as suspicious activity is detected, the siren can be activated to alert both you and the intruder.

Two-Way Audio: A Game-Changer

Two-way audio allows you to communicate in real-time through your security camera system. This feature enhances the effectiveness of the camera by enabling you to interact directly with whoever is on your property.

All our active deterrence security cameras have a built-in microphone and speaker for 2-way audio functionality from your smartphone using our mobile app. The 2-way audio feature provides an extra layer of security by enabling real-time, remote communication with individuals near the security camera. The 2-way audio feature can be used in many different scenarios.

Benefits of Having Two-Way Audio

Advantages of Lights in Security Cameras

Deterrence Effect

A bright light shining in the face of a potential intruder can be incredibly disorienting and threatening. It’s a simple but effective means of deterring unwanted visitors.

Visibility in Low-Light Conditions

If criminals think they can hide under the cover of darkness, security lights will make them think twice. These lights ensure your cameras capture clear footage, no matter the time of day.

Advantages of Sirens in Security Cameras

Immediate Alert

Imagine hearing a siren blaring in the middle of the night because someone tried to break into your home. That’s an alert you can’t ignore!

Deterrence to Intruders

The sound of a siren is universally understood as a signal to leave immediately. It’s a powerful tool that can send intruders running before they do any damage.

Advantages of Sound in Security Cameras

How Two-Way Audio Enhances Security

Real-Time Communication

Two-way audio adds a dynamic layer to home security. You’re not just watching; you’re interacting.

Interactive Deterrence

Being able to speak directly to someone on your property – whether friend or foe – provides a significant deterrent effect. Just imagine telling a suspicious individual that the police are on their way!

Installation and Setup

Easy Installation Tips

Setting up these cameras is straightforward. Most models come with comprehensive guides, and you can have them up and running in no time.

Choosing Strategic Locations

Placement is key. You want to cover all entry points and any other areas that could be potential targets.

Best Practices for Using Active Deterrent Security Cameras

Regular Maintenance

Keep your cameras clean and check for any updates to the software. Regular maintenance ensures your system remains effective.

Updating Software

Cybersecurity can’t be overlooked. Ensure your cameras are running the latest firmware to protect against hacking and other cyber threats.

Popular Brands and Models

Overview of Leading Brands

We at CCTV Security Pros offer a variety of active deterrent security cameras

Comparison of Top Models

Learn more about our top active secuity cameras and systems here!

Cost vs. Benefit Analysis

Initial Investment

Active deterrent cameras can require an upfront investment. However, what you spend now can save you thousands in potential theft or damage costs.

Long-Term Savings

Consider the long-term benefits: lower insurance premiums, reduced risk of theft, and peace of mind. Over time, these cameras pay for themselves.

Customer Reviews and Testimonials

Real-Life User Experiences

There’s no better way to gauge effectiveness than by hearing from those who’ve used these systems. Real user reviews often provide insights you won’t find in product descriptions.

Effectiveness in Various Scenarios

From deterring package thieves to keeping an eye on nighttime activity, these cameras have proven effective in a myriad of situations.

Conclusion

In today’s unpredictable world, security can’t be taken lightly. Active deterrent security cameras with lights, sirens, sound, and two-way audio offer a comprehensive solution to protect your home or business. From deterring intruders to providing you with peace of mind, these advanced systems are worth the investment.

To purchase, learn more, or view our full line of security cameras and systems.

FAQs

.

<p>The post ​Active Deterrent Security Cameras first appeared on NVR IPCAMERA SECURITY.</p>

How about you? It can happen for everyone to delete the videos from their system unexpectedly. We are here to share details and needed information about retrieving deleted videos from your Dahua system and explain some system features.

Can I retrieve deleted CCTV.

How do you review and save the videos in Dahua NVR?

We are here to tell you how to review and copy the recorded video in the Dahua NVR setup system. In the first step, you need to go to the menu option, so perform right-click anywhere on the screen to view the menu option. On the opened screen, you see the items below:

An important feature is available on the Dahua NVR system: the automatic systems are good features on these devices. Dahua NVR system cannot only record the videos but also back up the recorded videos.

In case of saving the videos, there will be a wireless option in the NVR system. Various devices can be connected to an NVR USB slot to save the videos. Connect one of these devices and right-click the mouse on the screen to open the menu. You can search for the demanded video date and time.

 ..

How to download recorded video files to USB on Dahua NVR?

It is good to know how to download some recorded footage you want to view on your PC or laptop. The first thing to do is go to the main menu. It may ask you for your password first, so you must enter it.

You will see the backup option. Click Backup. When you go to the backup option, it immediately shows you something connected to the USB. In this case, the process offers you a USB drive connected to your NVR system’s back.

There is a USB port on the back of the NVR system and a USB port on the front. You can use either one of these USB ports. According to the manual, it can connect to an external hard drive and the USB port.

Some users needed help connecting to the USB port with the larger hard drives. Based on this information, we recommend you use a thumb drive if you have one. You can insert your thumb drive into the USB port, and there will be a pop-up window.

In this step, you can access the back file too. You will have 2 methods available. You can either go via the menu or put your thumb drive in. Go to the backup menu. You can file the backup. Both methods lead you to the same backup screen.

It is also to see the used or free storage of your device. It is possible to format the drive to make the storage lighter. Be careful because it is straightforward to format the drive suddenly.

 .

How to backup video from the NVR system to USB?

We want to tell you how to backup video from your NVR system to a flash drive or USB drive on a system running. This is one of the most practical features of the Dahua CCTV system, similar to other security camera systems.

Various systems use features similar to the NVR system. The first stage is logging into your system typically. There will be some boxes, and you can see the cameras on those boxes.

Then, right-click to go to the main menu. In this step, you need to enter your password. Then is the time to go to the backup option. You will see your USB drive name if you have plugged it into the NVR system.

You have to connect your USB drive directly to NVR, and then you can check the storage condition. It is possible to browse and select where to save the recorded files on your drive.

You can also format the drive if it is brand new or a drive with files on it, and you don’t want to keep any existing files. You can go to the format and perform the format step to bring it back to the new state with nothing.

After formatting, you will not need to choose the exact place for your recorded video. You only need to go back to the browse and select the folder. It is vital to check out the type of video. What kind of video are you trying to search for?

Do you want to search for an alarm, a motion, a motion and alarm, a general video, and an intelligent one? What stream do you want to search for? Typically, the mainstream is useful and practical for everyone.

Getting back up from videos in NVR

In case you need to get the backup, you need to consider the start and end times. You have to select the time of the demanded day. In this case, you can click the search button and observe your record channel.

You can decide which camera you want to pull the video by checking this channel. It can be easy if you are looking only at one particular camera. But if you are looking at multiple cameras, you have to select 3 or 4 or even all.

Generally, getting the backup is a relatively easy task, but it is better to get help from intelligent experts in this field of activity. The good news is getting backup is possible in the NVR system, so you don’t need to be worried about the deleted or lost videos.

 .

How do you access the lost or deleted videos in Dahua NVR?

This part will explain the detailed steps to recover smashed videos from Dahua NVR systems. It would help if you double-click to open the NVR video data recovery software.

You can use the top and best software module for NVR. It is time to start the process. In the first step, you have to know the image file of Dahua. Then, select the image file and select the partition.

Next, you can use deep analysis to detect the NVR brand. You will see the NVR spot list. Sometimes, as the user, you are unsure about the NVR brand, so you can click the analysis mode directly to recognize the NVR system.

Finally, you can find out the main program has recognized 2 possible brands for the available image file. Usually, you have to select the top one. Finally, click the demanded one and click the OK.

It is also possible to rename the task and click OK. You can overwrite the existing task if you have worked with these features before. Can you find out the detectable dates?

You can detect the demanded video within these available dates and then analyze them. It is also a good idea to check the analysis speed too. You have to wait until the analysis process is completed. The remaining time is available for you to see and observe.

Besides the recorded videos, you can also face the raw videos with extension names. Remember that you must wait because the whole process of analyzing and video carving is automatic. So you don’t need to do anything.

Check the log and the file window. After completing the analysis, you can switch to the file window and find all possible cameras and a long list of videos.

 .

How do we recover the deleted videos from the Dahua NVR system?

According to the previous part and the access method of recorded videos in the NVR system, recovering these lost videos will be relatively easy. You only need the analysis mode of the Dahua NVR system, and for this analyzing process, you have to use deep analysis.

If this step and process don’t work as you want, you can select the device and try the custom analysis to set up another task. You also can try to put a name with custom. To tell the difference between each task, like fast analysis, deep task, and custom task, you must know all the available options in the NVR system.

Usually, you can use the deep or custom task for the Dahua NVR system. Finally, you can switch back to the directory or log window. You will the witness of the almost complete progress.

The digital experts mostly use the online checksum, and they have the read-only option in the setting. You can tick the demanded one to ensure it is the original device with the read-only option.

Not any of the proper operations can affect the original devices. Another available option is adding checksum options. These features show why many people need digital engineers.

The standard data recovery engineers can help you if you find your lost video. Some users believe they don’t need the expert because ticking the other checksum options is much easier.

The analysis speed will become slower than the average speed. Finally, you can check channel one of your camera and see the recovered lost videos. You can also watch the preview video, which is useful and practical.

 .

How do we retrieve the deleted video from NVR?

Time is the main thing when trying to retrieve the deleted recorded video. Whenever you realize you have lost your videos, preventing the NVR from overwriting the deleted video is essential.

Note that recording and storing the new videos can decrease the chance of a successful retrieval. In addition, you have to check the backup storage. This feature can help you recover the lost or deleted video.

Some NVR systems have an automatic backup feature, which helps you retrieve lost and deleted videos. If you cannot recover the lost data, contact your NVR system’s technical support.

These experts can provide the best guidelines and information to retrieve your lost footage. You only need to share the details of your NVR system, its software version, and the type of video you lost.

There is another available option to retrieve the deleted video. You can use the recovery software of the NVR system. This software can support you retrieve the deleted video as soon as possible.

You must follow the instructions mentioned to utilize the software quickly and promptly. This software is compatible with the NVR system. It can also be practical in the installation process of the NVR system.

Don’t forget to get help from a professional assistant in this field of activity. These persons can help you in a unique process using the most advanced tools and devices.

Final thought

Deleting helpful videos from NVR can be harmful, mainly when the video contains important content. Based on the mentioned information, it is possible to recover and retrieve the deleted or lost videos from the NVR system.

This article has mentioned all the steps and processes of deleted video recovery. We also share some information about the backup process in the NVR system. You have to check the highlighted process and consider the chance of a recovery process.

Finally, retrieving is only sometimes an easy method for everyone, but you can experience the recovery process with the help of different available devices and options. Don’t worry about your deleted video; you can retrieve it easily via the NVR system. We’re Dahua UK Authorised partner providing Dahua products with the best price only for trade users.

.

<p>The post Can I retrieve deleted CCTV footage from my Dahua NVR first appeared on NVR IPCAMERA SECURITY.</p>

Intro

You’re Not Alone

Installation can be hard. We’re happy to talk it over with you or take over a DIY project that you’ve realized needs professional installation. Our support hours are from 9AM-7PM Monday – Friday (EST) and we are available via chat, email, phones, and remote PC screen-sharing, if you need any help. You can reach us at 866-414-2553.

Disclaimer: The laws governing cable and wire installation can vary from state to state and sometimes even counties and cities pass specific, unique laws regarding cabling; these state, county and city laws are too complex for us to explain. This page is not a how-to installation guide, as we cannot keep up with local laws.

Although we now offer installation, locally, we started as a DIY-only company, and we primarily serve those adventurous types who want to run the cable for themselves. Even so, we get asked about do-it-yourself installation all the time…. We wanted to post a few of our standard answers here.

Part 1

Don’t Start a Fire or Shock Yourself

Electricity Can Kill You; Avoid Electrical Lines!

Never strap, staple or otherwise run networking cable to conduit or raceways carrying electrical current. Never run any cable within 2 inches of Class I electrical lines, lighting, fire alarm, or power lines or devices.

Give a Wide Berth to High Voltage Devices or Lines

Never run any cable within 6 feet of a conductor or fuse box. A minimum 5-inch distance is required from any fluorescent lighting fixture or power line over 2 kVA and up to 24 inches from any power line over 5 kVA. If unsure about the a device or line, consult an electrician. Route cable away as far as you can from large motors, generators, induction heaters, arc welders, x-ray equipment, and radio frequency, microwave or radar sources. NEC/NFPA 70, Article 800-52

Protect it from Future Physical Damage

You might want to put a nail or screw in later and don’t want to puncture your cables, so when a cable, raceway, or soft conduit (anything you can puncture) is installed parallel to framing members (joists, rafters, or studs), furring strips, or crown molding, keep the cable at least 32 mm (1.26 inches) from the edge. NEC 300.4(D)

Don’t Leave it Dangling – Secure Your Cables

You can connect cable directly to a surface with straps, staples, cable ties, hangers, or similar fittings, but you have to secure it somehow. NEC 800.24; 300.11

Use Plenum rated cable in Areas with Airflow

If you are going to run cables through an area which is used by your heating, air circulation, or air conditioner systems (such as above a drop ceiling in an office), you must use Plenum rated cables, which have a special insulation that has low smoke and low flame characteristics. When securing cable in Plenum required areas, make sure your straps, cable ties, and similar fittings also are plenum rated. NEC 830; NFPA 90A

National Rules – Consult your local laws

These guides are meant to familiarize our clients with the national requirements as expressed in the National Fire and Alarm Signaling Code and the National Electrical Code. Your state or local laws may differ. If you live outside the USA, consult your governmental laws. Don’t consider this your only resource.

Turn the Breaker Power OFF

Any time that you will be drilling or cutting into your wall, you want to turn the power off. You don’t want to drill into a hidden electrical line. You probably already know this, but our lawyers insisted.

Wear Safety Goggles

Any time that you are drilling, you want to wear safety goggles and hearing protection, like ear plugs.

Security Camera Installation Guides v2

Part 2

Drilling through Different Materials

Sheetrock (most interior walls)

A list of tools necessary, step-by-step instructions for installing SCW cameras, and how to close up the hole when drilling into a surface made of sheetrock.

Wood

A list of tools necessary, step-by-step instructions for installing SCW cameras, and how to close up the hole when drilling into a surface made of wood.

Stucco

A list of tools necessary, step-by-step instructions for installing SCW cameras, and how to close up the hole when drilling into a surface made of stucco.

Brick and Masonry

A list of tools necessary, step-by-step instructions for installing SCW cameras, and how to close up the hole when drilling into a surface made of brick.

Concrete

A list of tools necessary, step-by-step instructions for installing SCW cameras, and how to close up the hole when drilling into a surface made of concrete.

Metal Siding

A list of tools necessary, step-by-step instructions for installing SCW cameras, and how to close up the hole when drilling into a surface made of metal siding

Part 3

Running the Cable

Basic Cabling

Terminating Cable (Putting the ends on)

Instructions for putting the RJ45 ends on to ethernet (for example, Cat5 / Cat6 / Cat5e) cable.

Using Our Waterproof Connectors

When installing a camera outdoors, it is imperative that you put our waterproof RJ45 Connector on the ethernet (for example, Cat5 / Cat6 / Cat5e) cable.

No Protection – Just Running the Wire

You can connect cable directly to a surface with straps, staples, cable ties, hangers, or similar fittings, but the cable could get damaged and someone might be able to cut it.

24 Volt Wiring: PTZ

The Spotlight PTZ cameras uses 24 volt power rather than POE because it requires more power than is capable of Power-Over-Ethernet for its natural white light spotlight. The Laser can also be powered via 24 volt power and can be powered the same way, although it is not required to do so. This guide shows you how to wire these PTZs.

24 Volt Wiring: Sharpshooter

The Sharpshooter IP Bullet cameras uses 24 volt power rather than POE because it requires more power than is capable of Power-Over-Ethernet for its long range infrared. This guide shows you how to wire the Sharpshooter.

Protecting your Cabling

Liquidtight Plastic Tubing

Liquidtight plastic tubing is easier to work with than flexible metal tubing, but is less secure. It is also great for areas with lots of expected moisture as it won’t rust.

Flexible Metal Conduit (FMC)

Flexible metal conduit is difficult to cut (watch out for sharp edges), but easier than solid conduit to install.

Electric Metal Tubing (EMT)

Solid metal conduit is the most secure form of installation. It requires a specialty conduit bending tool.

Conduit Fill

This chart will let you know how many cable runs you can fit in one conduit pipe, depending on the size of the conduit.

Raceway (Outdoors) – Coming Soon

Raceways are most popular indoors to make the space look clean and professional. There are also outdoor rated raceways; this guide covers using raceways outdoors.

Clean and Professional Interiors

Raceway (Indoors)

Raceways are most popular indoors to make the space look clean and professional. There are also outdoor rated raceways. This guide covers using raceways indoors.

Ethernet Wall Plates

Not recommended. It can be difficult to find a wall plate that passes POE power and provides grounding. These devices also provide a secondary point of failure, and take up far more room than a cable pass through plate for larger systems.

Dealing with Long Distance

Using POE switches to reduce cabling

You can run one cable to a POE switch and then run several cameras to that switch, however, POE switches are not plug-n-play. POE switches do require you to know a decent amount about computer networking.

Cables run over 300 feet

Cat5e and Cat6 cable data has a limit of 300 feet, but if you need to go further than that you can use a POE extender, POE injector, or POE switch to hear and repeat the signal. This article discusses when you would use each of these tools.

Long Distance Wireless

Military-Grade Long-Range Wifi Solution are used when attempting to send wireless IP Camera video data more than 100 feet (and up to 3 Miles). These products will require a professional wireless network technician on location.

Part 4

Mounting Cameras and Recorders

Basic Camera Installation

Bullet Cameras on Walls

In this guide, we will be installing a bullet camera on a wall.

Bullet Cameras on Ceilings

In this guide, we will be installing a bullet camera on a ceiling.

Bullet Cameras on Soffits

In this guide, we will be installing a bullet camera on a soffit.

Dome Cameras on Ceilings

In this guide, we will be installing a dome camera in a ceiling tile.

Dome Cameras on Walls

In this guide, we will be installing a dome camera on a wall.

Positioning the Lens in our Dome Cameras

In this video guide, we demonstrate how to adjust the lens positioning on our Marshall, Guardian, Warden, and Mosquito Dome Cameras.

Audio and Alarm Inputs FAQ and Sample Wiring Guide

Here’s a guide on Line-Level Audio Inputs and Analog Wired Alarm Integration.

Attaching Our Camera Mounting Accessories

Electrical Mounting Boxes

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

PTZ Wall Mount Bracket

This guide will show you how to mount your PTZ camera to the wall mount bracket.

Pole Mounts

In this guide, we will be installing a Hornet Pro bullet camera on a pole.

Pendant Mounts

In this guide, we will be installing a Radius panoramic dome camera on a pendant mount. You can install all our PTZ and a few of our dome cameras via Pendant mounts.

Screw Size Chart

Lose a screw? No problem. Here’s all our 2018 product line screw sizes in one convenient place.

NVR Mounting Options and Hard Drive Installation

Shelf / Desk Mounting NVRs

This is what most people do: just put it on a shelf or desk. This makes it easy to connect to a TV/monitor and use the mouse (included) to control the NVR.

Rack Mounting NVRs

Companies often want to put the NVR in their server rack room. People who do this often to control the NVR only through our apps or web browser. Only our larger NVRs (16 channels and up) are wide enough to be rack mounted (and they come with ears). Our smaller NVRs can use our Rack Mount Shelf.

Wall Mounting NVRs

Many people choose to mount their NVR on a wall near a TV. To do this, you will want to purchase a vertical rack, like this one that matches the height of your NVR. The 16, 32, and 64 channels units have a height of 2U and the 128 channel is 3U. NVRs are heavy and you will want to make sure your wall can support the weight.

Mounting NVRs behind a Wall / in an Attic

People who are afraid of the theft of an NVR often place it behind a false wall or in an attic. People who do this control the NVR only through our apps or web browser. Be aware: Not all attics are insulated well enough to be within the temperature requirements of the NVR. Temperature range is listed on each NVR’s technical specs tab.

“NVR” Lock Boxes

There’s a few companies advertising “NVR Lock Boxes,” but any Server Rack or Computer Rack will do. Most Server Racks or Mounts have locks on them already. This picture is of a Tripp Lite Server Rack with Lock It houses a 32 channel NVR, two of our POE Switches, and a router, but there are tons of companies selling small server racks online.

NVR hard drive installation

If you purchase both a hard drive(s) and recorder from us, we will happily install the hard drive for you. but here’s a handy guide if you want to do it yourself.

Part 5: Specialized Work

When to NOT DIY – Get an Expert

Long Distance Wireless

Military-Grade Long-Range Wifi Solution are used when attempting to send wireless IP Camera video data more than 100 feet (and up to 3 Miles). These products will require a professional wireless network technician on location. We can’t offer support on this product remotely, as once we can see it remotely, that means that it is already working.

Aerial Cable

Aerial cable clearance varies based on location (cable over a road needs more clearance than over a sidewalk, for example), needs to be enclosed within 8 feet of finished grade, and requires a on-site structural analysis to make sure the cable won’t break. Hire an expert.

Burial of Cable

Number one, call 811 before you ever dig: know where your power company has buried its power cables! The required cable burying depth also can vary based on your local zoning laws and your certificate of occupancy; you should get an expert.

Elevators

Don’t even try to install any cable in one without a licensed elevator technician’s help as the cable needs to be inside the cable traveler. An error in securing the cable can result in damage to the elevator’s operation – and potentially the people inside it. Don’t mess with it; get a licensed elevator technician to run the cable.

<p>The post Security Camera Installation Guides v2 first appeared on NVR IPCAMERA SECURITY.</p>

Troubleshoot Offline Camera

Troubleshoot Offline Camera

Learn how to troubleshoot when a new Verkada camera is offline

Updated over a week ago

Use this article to read through some common scenarios and try the suggested troubleshooting tips to help. If you still need help, please contact Verkada Support.

What is the LED status of the camera?

Camera has been solid orange for over 10 minutes

Camera is blinking blue for over 5 minutes

Camera is solid blue for over 5 minutes, says “waiting to be connected on Verkada Command”

Roles and Permissions for Cameras

Roles and Permissions for Cameras

Learn about the roles and permissions available for Verkada Cameras

Updated over a week ago

This article describes the set of roles and associated permissions for Verkada Cameras.

Org-level roles

Organization-level roles are configured on a per-user basis. Groups cannot be used to set organization-level roles.

Below, click the down arrow to the left of the role to learn more about the role and access.

Org Member

Org Admin

Verkada Cameras Troubleshooting 2024

Site-level roles

Site-level roles can be assigned to individual users or to groups and pertain to a specific site or subsite. Subsites inherit the permissions from the subsites and parent sites above them.

No Access

Site Live-Only Viewer

Site Viewer

Site Admin

CP52-E PTZ permissions

The CP52-E PTZ camera permissions determine who can manage the Sentry Mode feature.

Permissions model (example)

Here’s a simple example of a permissions model that a typical organization with several sites and users may employ:

Users and their required level of access

Permissions each user should be assigned

.

Set Org Admin permissions

Revoke Org Admin permissions

Set site and subsite permissions

You can set site and subsite permissions by adding a user, a group, or by existing users and groups.

Add a user

Add a group

Existing users and groups

You can set the site and subsite permissions for existing users and groups by managing the user roles or the sites.

Manage roles

Manage sites

Customize roles and permissions

Verkada’s Roles & Permissions Customization feature enables Org Admins the ability to add or remove certain permissions from Site Admins and Site Viewers more granularly. Some organizations may want to limit or extend the permissions of the members of their organization based on their needs. Currently, we allow customization of permissions related to archives, link sharing, and user management.

Roles and Permissions for Command

Roles and Permissions for Command

Learn about the roles and permissions available to Command users and groups

Updated over a week ago

This article describes the set of roles and associated permissions for Verkada Command. It also explains how to customize roles and permissions.

Permission levels

Permissions are set at the following levels:

Daha fazla göster

Permissions considerations

Common user permission configurations

Daha fazla göster

Roles and permissions by Verkada product

.

Org-level roles

Org-level roles are configured on a per-user basis. Groups cannot be used to set org-level roles.

Org member

Org Admin

Access Control Role

.

Site-level roles

Site-level roles can be assigned to individual users or to groups and pertain to a specific site or subsite. Subsites inherit the permissions from the subsites and parent sites above them.

No Access

Site Live-Only Viewer

Site Viewer

Site Admin

Access Site Admin

.

Customize Roles and Permissions

Verkada’s Roles & Permissions Customization feature enables Org Admins the ability to add or remove certain permissions from Site Admins and Site Viewers more granularly. Some organizations may want to limit or extend the permissions of the members of their organization based on their needs. Currently, we allow customization of permissions related to archives, link sharing, and user management.

FAQ

Why has my organization disappeared?

Why are cameras missing from my organization?

Why can’t I access certain features or settings, such as other users?

Resolve Issues with Missing Cameras

Resolve Issues with Missing Cameras

Learn how to resolve issues when cameras are missing from your Verkada account

Updated over a week ago

When you log in to Verkada Command, you can only access cameras and video in organizations or sites where your user account has permissions.

Note: Even if you are an Org Admin, you still need to grant yourself permission to view all sites. Learn more about roles and permissions for cameras and Command.

If you log in to Command and cameras are missing or have disappeared, always check user permissions. The most common reason cameras are not visible is that your user account needs permissions to the site(s) where the cameras are configured.

Common reasons that can cause cameras to disappear

Check permissions

If you are an Org Admin, you can check and correct your own permissions:

Resolve Issues with Night Mode

Resolve Issues with Night Mode

Common issues with IR and Night Mode with steps to resolve them

Updated over a week ago

Each Verkada camera has night vision capabilities, using a sensor to detect low-light situations. When external lighting is low, the camera switches to night mode and records in black and white, using infrared (IR) LEDs to illuminate the environment. If the IR is emitted improperly through the dome or reflected into the lens, it negatively impacts image quality.

Common night mode issues

It is imperative that the dome remain free of debris and the camera is installed properly to achieve the best image quality. When viewing footage in night mode if the footage appears obscured it is most likely the result of one of the following scenarios:

Camera always in night mode

If your camera is always in night mode even where there is sufficient light in the environment the lux (light) value may need to be adjusted. If this is the case, reach out to Verkada Support for further assistance.

Environmental obstruction

If the camera is mounted too close to a wall, ledge, or light source, the image quality may be degraded due to IR reflection.

Recommendation. Ensure that cameras are mounted sufficiently far away from surfaces that may cause the IRs to reflect, such as light sources.

IR obstruction

If a first-generation Dome camera (D30 or D50) is operating in night mode when there is plenty of light, the IR sensor is likely obstructed by the camera housing.

To fix the obstructed light sensor, physically rotate the lens barrel assembly 180° so the sensor and IRs are visible through the camera case.

Example: Proper and improper orientation

Note: After rotating the lens barrel, the camera orientation may need to be changed in Command.

<p>The post Verkada Cameras Troubleshooting 2024 first appeared on NVR IPCAMERA SECURITY.</p>

Lorex Fusion: Download the Lorex App

The following article provides instructions for downloading the Lorex App and connecting your Lorex Fusion Collection recorder to the app.

Prerequisite

Before you start, your Fusion recorder must be powered on and connected to your router using the included Ethernet cable. For Basic System Setup instructions, refer to your Fusion recorder’s Quick Start Guide or Manual on the product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

.

Download the Lorex App

Once your Fusion recorder has connected to the Lorex App, complete the final Fusion steps by connecting your Fusion Wi-Fi cameras and accessories.

For setup instructions using the new local UI, please see the article Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (New Local UI).

For setup instructions using the previous local UI, please see the article Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories.

Lorex Fusion: Frequently Asked Questions

The following frequently asked questions (FAQs) provide more information about your Lorex Fusion Collection. Where applicable, the FAQ includes links to articles where you may find more information.

Lorex Fusion Troubleshooting FAQ.

What is Lorex Fusion?

Our Lorex Fusion recorders incorporate the newest (fusion) technology to connect both Lorex Wired and Fusion Wi-Fi Cameras, Doorbells, Floodlights, and Sensors to one system. Lorex Fusion Wi-Fi Cameras and Accessories can connect to one recorder for continuous 24/7 recording and local, secure storage (up to 10TB). Everything can be accessed from your Lorex App for easy control of all devices.

.

Why do I get an offline message and a blank screen for the (B463AJ) 2K battery doorbell’s channel on the Fusion recorder?

Being a battery-operated doorbell, it will always go to sleep after a period of inactivity to conserve battery life. Once the doorbell is correctly paired to your Fusion recorder, the offline message means the doorbell has gone to sleep but is still connected and can be awakened. When motion is detected, or when the call button is pressed, there will be live video from that channel. You can also manually wake up the doorbell through the Lorex app, by activating the liveview.

.

Can my Battery Video Doorbell record continuously?

To conserve battery life, Wi-Fi Battery Video Doorbells only record when motion is detected. They do not record continuously.

.

Which recorders are part of Fusion?

For a list of Lorex Fusion Recorders, please refer to the Product Compatibility Chart.

.

Can I connect all Lorex Wi-Fi Cameras and Accessories to my Fusion recorder?

Only Lorex Fusion Compatible Wi-Fi Cameras and Accessories can connect to Lorex Fusion Recorders.

.

Which Lorex Wi-Fi Cameras and Accessories are part of Fusion?

See the following list of Lorex Fusion Wi-Fi devices:

.

Should I update my Lorex Fusion recorder’s firmware?

It is recommended to update your system firmware to the latest version to ensure remote connectivity and to support newly added Fusion Wi-Fi devices.

.

Does my Lorex Fusion recorder require a network setup?

Yes, a network setup is required to connect Fusion Wi-Fi cameras and accessories to your Fusion recorder. Ensure you connect the included Ethernet cable to your recorder’s LAN port and your router.

.

Does it matter which router I use?

Yes, due to its strong signal, the dual-band router is suitable for high resolution video recording and for connectivity between devices. Ensure that your Fusion Wi-Fi cameras and accessories and your Fusion recorder are all connected to a dual-band router (2.4 GHz/5 GHz bands).

.

How many Lorex Fusion Wi-Fi Cameras and Accessories can I connect to my Fusion recorder?

This depends on your Fusion recorder and the number of Fusion Wi-Fi channels it comes with. For full technical specifications, refer to the Product Specifications on your recorder’s product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

.

What is a Fusion Wi-Fi channel?

A Fusion Wi-Fi channel is the channel you use to add a single Fusion Wi-Fi camera to your system. A 16-channel security system with 8 PoE ports/channels (for wired camera connection) and 8 Fusion Wi-Fi channels means that 8 Fusion Wi-Fi cameras and accessories can connect to the entire system.

Note: Fusion Wi-Fi channel’s are only available on certain Lorex Fusion recorders. For a list of Fusion recorders, see the Product Compatibility Chart.

.

How many Fusion Wi-Fi channels are on my Lorex Fusion Recorder?

The number of Fusion Wi-Fi channels varies per Fusion recorder. For full technical specifications, refer to the Product Specifications on your recorder’s product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

.

How do I setup my Lorex Fusion system?

Complete your Fusion setup in the following order:

After connecting your Fusion system, ensure you adjust your Fusion settings.

.

Are there Fusion setup tutorial videos?

For a video walk-through of the Fusion setup with the new local UI (N845, N846, N847, N864, D863, D881 Series), please watch here.

For a video walk-through of the Fusion setup with the previous local UI (N841, N842, N843, N844, N861, D862, D871 Series), please watch here.

.

How do I setup my Lorex Fusion recorder and wired cameras?

For Basic System Setup instructions, refer to your recorder’s Quick Start Guide or Series Manual on the product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

.

How do I connect my Lorex Fusion Wi-Fi camera or accessory to my Fusion recorder?

For full setup instructions, please click on the article corresponding with your model number.

.

Which password should I enter to connect my Lorex Fusion Wi-Fi camera or accessory to my Fusion recorder?

Enter the same password that you created in the Lorex App when setting up your Fusion Wi-Fi device.

.

What is continuous recording?

Once your Lorex Fusion Wi-Fi camera connects to your Fusion recorder, your camera’s recording settings are automatically set to continuous. This means that your Fusion Wi-Fi camera will record 24/7 or for the entire duration of the recording schedule onto your Fusion recorder’s hard drive. It is worth noting that recordings on the camera are limited due to the size of its onboard storage, while recordings on the recorder are extensive (3TB to 10TB). Continuous recording captures everything in the background, and you can playback to catch anything you missed.

.

Do all Lorex Fusion Wi-Fi cameras record continuously?

No, to conserve battery life, battery-operated video doorbells do not record continuously (24/7).

.

How do I set my Lorex Fusion Wi-Fi camera to continuous recording?

After Fusion setup, your Wi-Fi camera is automatically set to Continuous recording. To adjust your camera’s recording settings, login to your recorder and navigate to the devices menu. For instructions, please see the article Lorex Fusion: Adjust Settings.

Note: Battery-operated video doorbells do not record continuously (24/7). Being a battery-operated doorbell, it will always go to sleep after a period of inactivity to conserve battery life. Once the doorbell is correctly paired to your Fusion recorder, the offline message means the doorbell has gone to sleep but is still connected and can be awakened. When motion is detected, or when the call button is pressed, there will be live video from that channel. You can also manually wake up the doorbell through the Lorex app, by activating the liveview.

.

How come I’m receiving duplicate notifications in the Lorex App?

After completing the Fusion setup, your Wi-Fi camera or accessory is connected to the Lorex App twice – once as a single device and then a second time as a device connected to your recorder. To avoid receiving duplicate notifications from the same camera or accessory, you will need to Turn off Alerts for your Wi-Fi device connected to your recorder. For instructions, please see the article Lorex Fusion: Adjust Settings.

.

After Fusion setup, where is my Lorex Fusion Wi-Fi camera’s video footage being stored?

Your Lorex Fusion Wi-Fi camera saves recorded motion detection videos onto the local microSD card (not always included). Once you’ve connected your Fusion Wi-Fi camera to your Fusion recorder, your camera’s recording settings is automatically set to 24/7 Continuous recording, and all recorded video is stored on your recorder’s extensive hard drive (up to 10TB).

.

What features are supported in my Fusion recorder vs. the Lorex App?

Please see the following list of features supported in either your Fusion recorder and/or the Lorex App:

.

Can I use my web browser to access my Lorex Fusion Wi-Fi camera?

You can only access your camera on the Lorex App, recorder, or on the Lorex Cloud Client.

.

When modifying the password in the Lorex Cloud Client, which password should I enter?

Enter the password for your Wi-Fi camera or accessory created in the Lorex App during setup.

.

Where can I order the Lorex Fusion Collection?

To order, go to lorex.com.

Lorex Fusion: Troubleshooting

The following article provides some troubleshooting tips for setting up your Lorex Fusion Collection.

.

My Fusion Wi-Fi camera or accessory is not appearing in the device list.

.

My Fusion Wi-Fi camera or accessory is not connecting to my Fusion recorder.

• Give your Fusion Wi-Fi camera or accessory a few minutes to establish a connection.

• Check to see if your Fusion recorder has the most up-to-date firmware. New Local UI: Login to your recorder and navigate to System > Update & Reset > Upgrade, then click Check for Updates.  Previous Local UI: Login to your recorder and navigate to Main Menu > Information > Update/Reset > Update, then click Check for Updates. For instructions on updating your recorder’s firmware through USB, see the article How to manually upgrade the firmware of your recorder.

• Ensure that your Fusion Wi-Fi cameras and accessories and your Fusion recorder are powered on.

• The same password created for your Fusion Wi-Fi camera or accessory in the Lorex App must be entered in your Fusion recorder. If you have forgotten the password, then reset your Fusion Wi-Fi camera or accessory and connect it to the app again.

• (Applies to the previous local UI only) If your password for your Fusion Wi-Fi camera or accessory is entered incorrectly in your Fusion recorder, then your Wi-Fi device will lock itself. Reset your Fusion Wi-Fi camera or accessory and connect it to the app again.

• Ensure that you are entering the password for your Fusion Wi-Fi camera or accessory created in the Lorex App, and not the Lorex App account password. Those are two separate passwords.

• Ensure that your Fusion Wi-Fi camera or accessory is connected to a dual-band router (2.4 GHz/5 GHz bands).

• Ensure that you are connecting the Fusion Wi-Fi camera or accessory to an available Fusion Wi-Fi channel, and not a Wi-Fi channel that already has a Wi-Fi device connected to it.

.

I don’t know the password for my Fusion Wi-Fi camera or accessory.

If you don’t know the password for your Fusion Wi-Fi camera or accessory, then you will need to reset the device and connect it to the Lorex App again.

To reset your Fusion Wi-Fi camera or accessory:

.

I’m receiving duplicate notifications in the Lorex App.

After completing the Fusion setup, your Wi-Fi camera or accessory is connected to the Lorex App twice – once as a single device and then a second time as a device connected to your recorder. To avoid receiving duplicate notifications from the same camera or accessory, you will need to Turn off Alerts for your Wi-Fi device connected to your recorder. For instructions, please see the article Lorex Fusion: Adjust Settings.

Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (N910 Series)

The following article provides instructions for connecting your Lorex Fusion Collection Wi-Fi Cameras and Accessories to your N910 Fusion recorder.

.

Our Lorex Fusion recorders incorporate the newest (fusion) technology to connect both wired and Wi-Fi cameras, doorbells, floodlights, and motion sensors to one system. All Fusion compatible Wi-Fi cameras and devices connect to one recorder for continuous 24/7 recording and private local storage. Access everything from the Lorex App for easy control of all devices.

Note: To conserve battery life, Wi-Fi Battery Video Doorbells only record when motion is detected. They do not record continuously.

For any connection issues, see the article Lorex Fusion: Troubleshooting.

.

Part One — Wired Setup

Setup your Fusion recorder and wired cameras. For Basic System Setup instructions, refer to your recorder’s Quick Start Guide or Manual on the product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

Important: Network setup is required for your system — use the included Ethernet cable to connect your recorder to your router.

.

Part Two — Connecting your Lorex Fusion Wi-Fi Camera

Connect your Lorex Fusion Wi-Fi Camera to the app and then from your recorder scan your network to add it.

.

Option A — Connecting Your New Lorex Fusion Wi-Fi Camera to Your Recorder

Add compatible Lorex Fusion Wi-Fi Cameras and Accessories onto Fusion Wi-Fi channels on the recorder.

To connect your New Lorex Fusion Wi-Fi Camera to the recorder:

Note:

.

Option B — Connecting Your Existing Lorex Fusion Wi-Fi Camera to Your Recorder

Add compatible Lorex Fusion Wi-Fi cameras and accessories onto Fusion Wi-Fi channels on the recorder.

Note:

To enable remote viewing for the mobile app, you will need to:

To connect your Existing Fusion Wi-Fi camera to the recorder:

1.From the Live View display, click the pair icon  in the center of the Fusion Wi-Fi channel’s screen.

Note: It may take a few minutes for your Lorex Fusion Wi-Fi Camera’s video feed to appear.

To turn off duplicate notifications, adjust your camera’s recording settings, or link motion sensors to cameras, see the article Lorex Fusion: Adjust Settings.

Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (N845, N846, N847, N864, D863, D881 Series)

The following article provides instructions for connecting your Lorex Fusion Collection Wi-Fi cameras and accessories to the Lorex App and to your Fusion recorder.

Note: These Fusion instructions apply to the new local UI only. For Fusion instructions that apply to the previous local UI, please see the article Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories.

.

Before you start

.

Watch the Lorex Fusion setup tutorial video

For a video walk-through of the fusion setup, please watch here.

.

Connect your Fusion Wi-Fi cameras and accessories to the Lorex App

Follow the Lorex App steps to add your Lorex Fusion Wi-Fi cameras and accessories. Refer to your camera’s documentation at help.lorextechnology.com for detailed setup instructions. Search your camera’s model number to access the product support page.

Note:

2.In-app, tap the  icon to add your Wi-Fi camera.

.

Connect your Fusion Wi-Fi cameras and accessories to your Fusion recorder

Note: You can add one Wi-Fi camera or accessory to one Fusion Wi-Fi channel. The number of Fusion Wi-Fi channels varies per Fusion recorder. For full technical specifications, refer to the Product Specifications on your recorder’s product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

2.From the Live View display, click the pair icon  from the center of the Fusion Wi-Fi channel.

Note: If your Lorex Fusion recorder and Fusion Wi-Fi camera share the same password, then the devices will automatically connect without entering the password.

.

After successfully connecting to your Fusion recorder, your Fusion Wi-Fi camera or accessory connection status turns green. For any connection issues, see the article Lorex Fusion: Troubleshooting.

To turn off duplicate notifications, adjust your camera’s recording settings, or link motion sensors to cameras, see the article Lorex Fusion: Adjust Settings.

Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (N841, N842, N843, N844, N861, D862, D871 Series)

The following article provides instructions for connecting your Lorex Fusion Collection Wi-Fi cameras and accessories to the Lorex App and to your Fusion recorder.

Note: These Fusion instructions apply to the previous local UI only. For Fusion instructions that apply to the new local UI, please see the article Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (New Local UI).

.

Before you start

.

Watch the Lorex Fusion setup tutorial video

For a video walk-through of the Fusion setup, please watch here.

.

Connect your Fusion Wi-Fi cameras and accessories to the Lorex App

Follow the Lorex App steps to add your Lorex Fusion Wi-Fi cameras and accessories. Refer to your camera’s documentation at help.lorextechnology.com for detailed setup instructions. Search your camera’s model number to access the product support page.

Note:

2.In-app, tap the  icon to add your Wi-Fi camera.

.

Connect your Fusion Wi-Fi cameras and accessories to your Fusion recorder

Note:

After successfully connecting to your Fusion recorder, your Fusion Wi-Fi camera or accessory connection status turns green. For any connection issues, see the article Lorex Fusion: Troubleshooting.

To turn off duplicate notifications, adjust your camera’s recording settings, or link motion sensors to cameras, see the article Lorex Fusion: Adjust Settings.

Lorex Fusion: Adjust Settings

The following article provides instructions for adjusting your Lorex Fusion Collection settings.

.

Turn off duplicate notifications

After completing the Fusion setup, your Wi-Fi camera or accessory is connected to the Lorex App twice – once as a single device and then a second time as a device connected to your recorder. To avoid receiving duplicate notifications from the same camera or accessory, you will need to Turn off Alerts for your Wi-Fi device connected to your recorder.

To turn off duplicate notifications:

2.Under your Fusion recorder, swipe left to find your Fusion Wi-Fi camera or accessory.

3.Tap on your Fusion Wi-Fi device’s notification icon .

.

.

Adjust the recording settings for your Fusion Wi-Fi camera or accessory

After Fusion setup, your Lorex Fusion Wi-Fi camera’s recording settings will automatically adjust to Continuous, recording 24/7 directly to your recorder’s hard disk drive.

To adjust the recording settings (new local UI):

To adjust the recording settings using the previous local UI, navigate to Main Menu > CAMERA > Recording > Recording and follow the same steps as above.

.

Set the recording schedule for your Fusion Wi-Fi camera or accessory

You can set a custom recording schedule according to your needs. For example, you can set the system to record continuously during business hours and record on motion detection only outside of business hours.

• Click-and-drag on each day to customize the recording schedule. The schedule is set up as a grid, with each block representing two hours.

• Click  beside 2 or more days to link schedules (). This allows you to quickly change multiple schedules at once.

• To make fine adjustments to a schedule, click . This will allow you to set exact start and end times for a schedule.

• To disable all recording of the selected type on the selected day, click .

To set the recording schedule using the previous local UI, navigate to Main Menu > STORAGE > Schedule and follow the same steps as above.

.

Link sensors to cameras

Once you’ve completed the Fusion setup, you can link motion and door/window sensors to any compatible camera, so that when the sensors are triggered the linked automatically cameras record.

.

To learn more about using your Lorex Fusion system, visit the Fusion page or refer to the Lorex Fusion: Frequently Asked Questions article.

.

<p>The post Lorex Fusion Troubleshooting FAQ first appeared on NVR IPCAMERA SECURITY.</p>

ATTENTION: Prior to purchasing and installing an accessory antenna, read the product specifications of your receiver to determine if your receiver has a weatherproof housing. Installing your weatherproof receiver outdoors provides a better line-of-sight between the receiver and the camera, increasing the strength of the wireless signal. See your product specifications to determine the weatherproof rating of your receiver.

The Directional Wireless Panel Antenna and the Omni-Directional Antenna are used to extend the range of one or multiple wireless or wire-free cameras.

Directional Wireless Panel Antenna (ACCANTD9)

Omni-Directional Antenna (ACCANTO8)

Use the 2.4GHz Directional Wireless Panel Antenna (ACCANTD9) to focus a wireless signal onto one specific wireless device (camera or receiver) to increase the range of transmission. A clear line-of-sight between the antenna and the wireless device needing range extension is required.

Use the 2.4GHz Omni-Directional Antenna (ACCANTO8) to enhance the signal of one or multiple cameras that are paired to a single or dual antenna receiver. You may also use two Omni-Directional Antennas to extend the range of all cameras paired to a dual antenna receiver.

REQUIREMENT: To connect the antenna directly to the camera or receiver, the device must have a removable SMA type antenna. Visit www.lorextechnology.com/compatibility to ensure the antenna is compatible with your camera or receiver model.

Lorex Wireless Cameras and Monitors guide 2024

Also Read  : Lorex Camera Troubleshooting

Recommended Antenna Installation Methods

Your antenna needs will vary depending on the setup of your camera system, the number of cameras that require range extension, and the number of channels on your wireless receiver. Review the scenarios below to ensure you have the correct antenna and installation method to meet your needs.

Click a setup scenario to see the recommended installation method:

Combining Accessory Antennas

If you have installed your accessory antenna according to the recommended installation methods and would like to enhance wireless signal strength even further, you may add an additional Directional Wireless Panel Antenna (ACCANTD9) directly to a camera. The additional Directional Wireless Panel Antenna can be used with a Directional Wireless Panel Antenna or with an Omni-Directional Antenna attached to the receiver.

Click an antenna combination to see recommended installation methods:

Scenario 1: Extend the range of one camera paired to a single antenna receiver

To extend the range of one camera connected to a single channel receiver, use the Directional Wireless Panel Antenna (ACCANTD9).

The Directional Wireless Panel Antenna can be connected in two configurations.

Configuration 1. Connect the antenna directly to the camera

Configuration 2. Connect the antenna directly to the wireless receiver

REQUIREMENT: The antenna connects using an SMA cable and replaces the existing antenna on either the camera or wireless receiver. Check www.lorextechnology.com/compatibility to determine if your product is compatible with the antennas.

Scenario 2: Extend the range of one camera paired to a dual antenna receiver

To extend the range of one camera connected to a multi-channel receiver, use the Directional Wireless Panel Antenna (ACCANTD9). Connect the Directional Wireless Panel Antenna directly to the camera.

Scenario 3: Extend the range of select cameras paired to a dual antenna receiver

To extend the range of select cameras on a multi-channel receiver, use the Omni-Directional Antenna (ACCANTO8).

Connect the Omni-Directional Antenna to one of the antenna ports on the wireless receiver.

REMINDER: Each antenna port on a dual antenna receiver is associated with specific camera channels. One antenna communicates with odd numbered channels (1, 3, and 5), while the other antenna communicates with even numbered channels (2, 4, and 6). See the table below for dual antenna channel configurations.

If you connect the Omni-Directional Antenna to an antenna port and your wireless signal does not improve, try switching the Omni-Directional Antenna to the other antenna port or pairing your camera to a different camera channel.

Scenario 4: Extend the range of all cameras paired to a dual antenna receiver

To extend the range of all cameras on a dual antenna receiver, connect an Omni-Directional Antenna (ACCANTO8) to each antenna port on the receiver.

IMPORTANT: Two Omni-Directional Antennas are required to accommodate this setup.

Combination 1: Combine two Directional Wireless Panel Antennas

If you are using a Directional Wireless Panel Antenna (ACCANTD9) to enhance the signal of a single camera with a single channel receiver, you can use an additional Directional Wireless Panel Antenna to further enhance the wireless signal.

Connect one Directional Wireless Panel Antenna directly to the camera and one Directional Wireless Panel Antenna directly to the wireless receiver. To maximize signal strength, it is recommended to aim the two antennas directly at each other with a clear line-of-sight.

Combination 2: Combine a Directional Wireless Panel Antenna with an Omni-Directional Antenna

If you are using an Omni-Directional Antenna (ACCANTO8) to enhance the signal of multiple cameras, you can further enhance the signal of a specific camera by connecting a Directional Wireless Panel Antenna (ACCANTD9) directly to the camera.

A clear line-of-sight between the Directional Wireless Panel Antenna and the Omni-Directional Antenna is recommended to maximize signal strength.

Lorex SD Pro App: Changing / resetting the password

If the password for the Lorex SD Pro app to view the Wireless Home Monitor is lost or forgotten it will need to be reset.

To reset the Lorex SD Pro app password:

1.Ensure that your Wireless Home Monitor is connected to a network router using the included Ethernet cable.

2.On the Wireless Home Monitor tap the Menu icon ().

3.Use the joystick to select Settings > Network > Reset Password.

4.Select Yes to confirm.

5.Tap the Menu icon () repeatedly until all the menus are closed.

6.Launch the SD Pro app and enter the default password. Refer to your user manual for your default password. You will be prompted to create a new password.

Lorex SD Pro App: Setting up Wireless Home Monitor remote access

You can access and view wireless cameras from a Wireless Home Monitor system using an iPhone, iPad, or Android smartphone or tablet using the Lorex SD Pro app. It is available at the App Store or Google Play Store.

Prerequisites:

To set up the mobile application:

LW2700 Wireless Home Monitor: Included cables and accessories

LW2700 Series Wireless Home Monitors support wireless cameras using a wireless signal. They do not have an internal battery and require a connection to a power source. Refer to your user manual for model specific information on cables and accessories. Click here for downloads and documentation for your product.

Most wireless home monitors include the following cable connections and accessories when purchased:

Network: Wireless camera Internet requirements

Standard wireless cameras that connect to a DVR / NVR, do not need access to the Internet to function. Stand-alone IP cameras do not require an Internet connection for basic functions, but an Internet connection is required for full functionality.

Security Cameras: Understanding Field of View (FOV)

Field of View (FOV) is the maximum observable area that is seen at any given moment through an optical device such as a camera lens. The coverage of the area can be measured using the horizontal and vertical distances to find the diagonal of the area in degrees. Mathematically, the FOV is calculated using the horizontal dimension of the sensor (h) and the Focal Length (F).

You can find the camera’s Field of View details in the Specifications sheet. Click here for additional support content including security camera documentation.

The Camera Lens, Sensor and Focal Length

Focal length (F) is the distance between the center of a lens and its sensor. The size of the lens is the aperture size.

These factors affect field of view. A narrower focal length captures more of the scene and displays a larger field of view. A wider focal length magnifies a scene and decreases the field of view. The higher the focal length value the lower the FOV.

Types of Camera Lenses

Fixed: a fixed camera focal length provides an Angular FOV which is permanently set and cannot be adjusted by the user. Varifocal: the camera focal length can be manually adjusted by the user. Generally, this is done manually with screws or dials. At Lorex we have motorized varifocal cameras that allow you to digitally zoom using your phone or NVR without losing details. These lenses provide flexibility and customization for your camera image needs.

The importance of Field of View

A wide angle lens or smaller lenses produce a greater field of view and captures more objects in a scene enhancing your ability to cover larger and wider areas such as foyers, parking lots or warehouses.

A narrow angle lens or larger lenses produce a smaller field of view; capturing a limited area, but the camera quality image improves in detail. These are designed to monitor a specific object, such as cash registers, entrances/exits, hallways or objects of value.

How to Calculate the FOV

To calculate the FOV requires the sensor size and the focal length of the lens: h = Sensor Size F = Focal Length of the Lens

FOV is represented by this equation: FOV = 2tan-1(h) / 2F

Example: h = 4.7mm F = 6mm FOV = 2tan-1(h) / 2F = 2tan-1(4.7)(12) = 2tan-1(0.39) = 2(21.4°) = 42.8°

W482CAD – 2K Wi-Fi Camera : Frequently Asked Questions

The following FAQ article answers many of the general questions about the 2K Wi-Fi Camera with Smart Deterrence (W482CAD). Where applicable, the FAQ includes links to articles where you may find more information.

.

Where do I place my Lorex 2K Wi-Fi Camera?

.

How should I position my Lorex 2K Wi-Fi camera?

When mounting the camera on a wall, make sure of the following:

 Accuracy of person detection will be influenced by multiple factors, such as the person’s distance from the camera, the height of the person, and the height and angle of the camera. Night vision will also impact the accuracy and distance of detection.

.

How do I enable motion detection and person detection?

1.Launch the Lorex App.

2.Tap  icon above the channel thumbnail on the Devices screen.

3.Tap Motion Detection Settings.

4.Tap  icon to enable Motion Detection.

Note: If motion detection is disabled, general/person/vehicle detection will automatically disable and you will not receive any motion detection notifications in the Lorex App.

.

How do I customize Motion Zones™?

Motion Zones™ allows you to customize your device’s motion detection region. Motion Zones™ screen consists of the following settings:

To set Motion Zones™

1.Launch the Lorex App.

2.Tap  icon above the channel thumbnail on the Devices screen.

3.Tap Motion Detection Settings.

4.Tap Motion Zones™.

 For full instructions on how to set customized Motion Zones™, see Configuring Motion Zones™.

.

Why am I receiving so many notifications?

There are a few ways you can lower the number of notifications you are getting.

.

How do I enable Color Night Vision?

1.Lauch the Lorex App.

2.From the Devices screen, tap  icon to configure device settings.

3.Tap  icon to disable Auto Night Vision.
Note: Disabling Auto Night Vision will force the camera into Color Night Vision mode. Recommended in low-light conditions.

.

How to activate Two-Step Verification?

1.Launch the Lorex App.

2.Tap Settings.

3.Tap Account Settings.

4.Tap Two-Step Verification.

5.Tapicon to enable Two-Step Verification.

For detailed setup instructions, see Two-Step Verification Setup.

.

How to optimize video quality?

1.Launch the Lorex App.

2.Tap  icon above the channel thumbnail on the Devices screen.

3.Tap Video Settings.

4.Tap  icon to enable HDR (High Dynamic Range).

Note: Enabling HDR optimizes video picture in high-contrast conditions such as under-lit and over-lit areas.
By default, the video quality is set to High (2x1080p HD).

.

What is Home & Away™?

Lorex App can automatically use your location to manage your notifications when you are at home or away. The app will notify you when you are inside/outside of your set home perimeter.

To start using this feature, navigate to your mobile device settings and enable Location services for Lorex App.

For detailed setup instructions, see Configuring Home & Away™.

.

How do I activate the LED deterrence light when motion is detected?

1.Lauch Lorex App.

2.From the Devices screen, tap  icon to configure device settings.

3.Tap Deterrence Light Brightness.

4.Tap  icon to enable camera’s deterrence light whenever motion or person is detected.

.

How do I remove the 2K Wi-Fi Camera from my account?

1.Launch the Lorex App.

2.From the Devices screen, tap  icon to configure device settings.

3.Tap Remove Device.

.

How to permanently delete data of 2K Wi-Fi Camera?

Refer to Formatting Device Storage for more information.

.

Does my device support WPA2 or WPA3?

Your device supports Wi-Fi Protected Access 2 (WPA2) which is the industry standard security protocol for Wi-Fi networks. WPA2 offers security against unauthorized access and data interception and is supported by most Wi-Fi routers including those that support both WPA2 and WPA3. It employs Advanced Encryption Standard (AES), an encryption mechanism, which secures communication between your camera and Wi-Fi network to keep transmitted data confidential. For information on which devices support WPA2 and which devices support WPA3, please refer to “WPA2 and WPA3 Supportive Devices.”

.

What are the compatible SD cards?

Refer to Compatible SD Cards and Storage Sizes for more information.

.

What devices are compatible with the 2K Wi-Fi camera?

Refer to Product Compatibility Chart for more information.

W482CAD – 2K Wi-Fi Camera : Installation

This article provides instructions to install your Lorex 2K Wi-Fi camera with Smart Deterrence (W482CAD).

.

What is included in the box?

The above contents are based on one camera.

.

How to connect with Lorex App

3.Open the Lorex App app and create an account or login with your credentials.

4.Tap  icon to add a new device, then follow the in-app instructions to complete the device setup.

For full instructions on Lorex App setup, see Connecting with Lorex App.

.

How to mount 2K Wi-Fi Camera to the wall

.

How to mount 2K Wi-Fi Camera to the ceiling

Wi-Fi Security Cameras – How to Read a MicroSD card

To view the contents of a MicroSD card on a laptop or computer, follow these steps:

a. Select the day to play back:

b. Click on the available folder:

c. Within the folder, click either the day folder (Video files) or the jpg folder (Snapshots):

d. Click to select a video time from 00 – 23 hours:

6.Click the MP4 video file to view the video. 

Wireless Home Monitor: Audio not working

If the audio is not working on your Wireless Home Monitor:

• Ensure that the protective film is removed from the camera lens.

• Ensure that the monitor volume is not muted. A mute icon () will be visible on the screen if the volume has been muted.

• Turn the monitor volume up using the volume buttons on the side of the unit. Location will vary by model. For exact location of volume buttons for your model, refer to your user manual. Click here for downloads and documentation for your product.

• The camera must be in Full Screen mode for audio. Tap the Channel Select icon () to switch between channels in Full Screen mode. Audio is disabled in Quad mode.

If audio is not working after increasing the volume and viewing in Full Screen mode, restore the system to default settings.

To restore your monitor to default settings:

CAUTION: Restoring to default settings will erase any setting input on the monitor. Your monitor will need to be reconfigured.

1.On the monitor tap the Menu icon ().

2.Use the joystick to select Settings > Default Settings.

3.Select Yes.

.

<p>The post Lorex Wireless Cameras and Monitors guide 2024 first appeared on NVR IPCAMERA SECURITY.</p>