Smart Bird Feeder Camera,1080P HD Camera Auto Capture Bird Videos & Solar Panel, App Notify When Birds Detected, Free AI Identify Bird Species, Bird House with Built-in Microphone.

Download Bird Lover app

Download and install the Bird Lover App for either IOS or Android.

Login Bird Lover app

Once downloaded, the APP will prompt you to register your device. Enter your phone number or email address which one makes you feel comfortable and select the country you live in. You will receive the registration code. Input the registration code, then create a password.

Note

Indicator Description

Connect Bird Lover Bird Feeder Camera To Wifi

1. Turn on the Bird Lover Bird Feeder camera power and you will see the indicator light flashing quickly and hear a sound.

.

2. Open the Bird Lover App, click +, select your Bird Feeder Camera (you can choose one at random, the connection is the same), and then follow the instructions of the App.

3. Bird Lover Bird Feeder Camera only supports 2.4G wifi, please make sure your current wifi is 2.4G.
Enter your wifi password, make sure the wifi password and wifi are correct and click Next.

4. Scan the QR code with the Bird Feeder camera. You will hear a prompt sound after a successful scanning.

NOTE: The QR code needs to be aimed at the camera below

5. Wait for Bird Lover Bird Feeder Camera to connect to your wifi, about 60-120 seconds.

Detection settings

1. Turning on or off the “Motion Detection” at the Features interface.

2. Make sure there is an option to turn on notifications.

Click “ME” in the lower right corner, Click the settings button in the upper right corner,Click App Notification.

3. Click “Alarm” to turn on or off. You also can set schedule for “Do Not Disturb Schedule” at the same interface.

Identify live birds

1. Click “bird” icon

2. Click “Gallery”-Click “photo”-Click “bird” icon

Reset Bird Lover Bird Feeder Camera

Press and hold the reset button for 5 seconds to reset the camera.

Bird Lover APP INTERFACE INTRODUCTION

Install Bird Feeder Camera

1. Stick the sticker on the tree or wall and drill holes within the range marked on the sticker.

2. Insert the green plastic screw spacers into the hole.

3. Fix the bracket with long screws.

4. Install the bird feeder and align the three holes underneath.

5. Fix bird feeder with three short screws.

6. Install the perch with the two screws in the package.

7. The bird house can rotate left and right.

How to Charge Bird Lover Bird Feeder Camera?

Bird Lover Bird Feeder Camera FAQ and Troubleshooting

How to get it to connect to two different routers?

It cannot be connected to two different routers at the same time.If you want to change routers, you will need to reset the camera and reconnect your phone and camera. Please make sure that your phone and camera are both connected to the same Wi-Fi network before pairing.

How to reset Bird Lover Bird Feeder Camera?

Why The current network is in poor condition/The APP keeps going round in circles?

The network signal is weak if there are walls between the outlet, router and phone. This is because the network signal is absorbed or blocked by walls or large obstacles. It will help to have strong Wi-Fi with a Wi-Fi extender/booster.

How to charge Bird Feeder Camera?

A solar charging panel integrated into the roof can provide a constant source of power to support the smart bird camera. You can charge the battery of the Bird Box Camera via USB for continuous charging at night and on rainy days.

Why the Bird Lover Bird Feeder Camera battery is drain so fast?

It is low power consumption camera. Plus the solar panel power in charge, it can maintain the daily energy consumption in sunny day. If the battery drains too fast, you should check:

How to identify birds species?

Simply click on the “Identify” icon and the app will identify the bird species and provide a description of the bird. See the manual for details.

Why the recognition result is wrong?

The accuracy of the results depends on the angle and clarity of the bird images.

To ensure a correct result, please ensure that the image is clear enough. The identifying features (bird’s head, tail, wings or pattern on feathers) should not be obscured by obstructions.

The bird should be in the main position in the picture; try to capture the best moment to recognise the bird if the previous recognition accuracy rate is too low; if there are two or more bird species in a picture, the identified result will be the one in the main position.

How many account can connect this Bird Lover Bird Feeder Camera ?

Only one account can connect to Bird Lover Bird Feeder Camera, you can share it with other accounts through the sharing function.

Can I use the Bird Lover Bird Feeder Camera without a TF storage card?

It is not affected for daily use without TF storage card. Without storage card, it can receive notifications, watch in real time, take pictures and record videos (It will be stored in the APP Gallery );

Just can’t record.

Will this camera show video through the app if my phone is 5g?

Yes.

.

<p>The post How To SetUp Bird Lover Bird Feeder Camera first appeared on NVR IPCAMERA SECURITY.</p>

ACH20-1B Thermal Monocular Camera: Using the App

Take some time to learn about using your thermal monocular camera through the companion Thermal Connection app.

Live View Settings

The Live View is the first screen you will see when your camera connects to the app. It includes the following features:

Digital Zoom

Zoom in on a certain part of your camera’s image to magnify details.

1.From Live View, tap .

2.Tap your preferred zoom range.

3.Tap OK to save.

Color Palette

Select your camera’s color palette for enhanced visual representations of thermal imaging.

1.From Live View, tap .

2.Tap on one of the following color palettes:

Note: Not all color palettes are suited for every situation. Select the option that best shows the thermal differences for your specific application.

Record Images & Videos

1.From Live View, tap .

2.Tap the screen to display the capture and record icons.

3.To capture images: Tap .

4.To start or stop recording videos: Tap .

Note: A blinking red dot next to a recording timer on the left of the screen indicates that your camera’s recording.

Function Settings

Enable some of your camera’s features, like the laser pointer, fire detection, or track hot and cold points.

Laser Pointer

Use the laser pointer to illuminate a point of interest with a bright spot of colored light.

 LASER RADIATION:

Exposure to laser light can cause significant damage to the eyes. Never look into the laser beam directly or through a piece of optical equipment.

After a few seconds, the laser pointer automatically turns off.

Fire Detection

Detect fires in your camera’s image with a red box surrounding the source. If enabled, you can set the fire detection sensitivity from high to low.

Hot & Cold Points

Track the hottest and lowest temperatures in your camera’s image at the same time. If enabled, your camera’s image will display a red target tracking the hottest point and a blue target tracking the lowest point.

System Settings

Customize your camera’s system settings or sign out.

Automatic Sleep Mode

Select how long your camera waits before entering sleep mode.

Automatic Shutdown

Select how long your camera waits before turning off.

Change Measurement Unit (Meter to Feet)

Change your camera’s measurement unit.

Sign Out

Disconnect your camera from the app by signing out of the app.

Restore to Default Settings

Restore your camera’s menu and app settings to its factory default settings.

ACH20-1B Thermal Monocular Camera: Troubleshooting

The following article provides some troubleshooting tips for using your thermal monocular camera.

.

Camera’s image/screen is blurry.

Adjust your camera’s diopter to your eyesight. Before you begin, it is highly recommended that you adjust your camera’s diopter to your eyesight. Focusing your view will minimize eye strain and fatigue.

Camera’s Wi-Fi hotspot is not showing.

• Wait a moment for it to appear in your phone’s Wi-Fi settings.

• When enabling your camera’s hotspot in your camera’s settings, try to press  a couple more times.

• Ensure you have allowed the app to use your location, otherwise it will not be able to detect your camera’s Wi-Fi. Navigate to your phone’s settings, then open the Thermal Connection app settings, and enable Location — While Using the App.

Camera is not connecting to the app.

The Wi-Fi password is case sensitive. Make sure you enter the serial number in the same letter format, whether that is uppercase or lowercase.

Camera has disconnected from the app.

Camera’s Live View is frozen in the app.

If the Live View is frozen perform a hard close of the app, then open it again.

Digital zoom is not working.

Digital zoom will not work while your camera’s menu is open. Press  to exit the menu.

Camera is not recording images and videos.

Recording images and/or videos will not work while the menu is open or when your camera is connected to a computer. Press  to exit the menu.

Camera’s screen is black.

Restart your camera. Press and hold  to turn your camera off, and then back on.

Camera is not charging or slow to charge.

• Ensure you use the supplied micro-USB cable and that it is properly connected.
 DANGER

◦ Improper battery replacement or use may result in fire, explosion, or other hazards.

◦ Only use accessories regulated by the manufacturer. Never use the charging cable or power adapter with another product.

◦ Make sure the plug is properly connected to the power socket.

◦ DO NOT charge your camera within 2 m of flammable materials.

◦ DO NOT connect multiple devices to one power adapter. The plug in the power socket could overheat and possibly cause a fire.

• Ensure the USB Mode is set to Off.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to USB Mode.

◦ Press  to open the setting.

◦ Press  to select Off.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

Camera’s battery keeps draining.

You can preserve your camera’s battery life in the following ways:

• Turn off any camera settings or functions that are not being used.

• Use your camera without the app. First, sign out your camera from the app, and then turn the Wi-Fi hotspot off. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to WiFi.

◦ Press  to open the setting.

◦ Press  to select Off.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• Set your camera to go into automatic sleep mode after 1 minute of inactivity has passed. First set your camera’s sleep mode (Suspend Mode) to be automatic, and then set the automatic sleep mode (Auto Suspend) to 1 minute.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to Suspend Mode.

◦ Press  to open the setting.

◦ Press  to select Automatic.

◦ Press  to confirm your setting.

◦ Press  to navigate to Auto Suspend.

◦ Press  to open the setting.

◦ Press  to select 1 Min.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• Set your camera’s screen brightness to low.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to Brightness.

◦ Press  to open the setting.

◦ Press  to select Low.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• Set your camera’s automatic shutdown to 60 minutes or less. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to Auto Shutdown.

◦ Press  to open the setting.

◦ Press  to select 60 Mins or less.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

Camera’s image has lots of graininess or scratches.

• Turn your camera off, attach the lens cap, and allow it to rest for a few hours before using again.

• To improve your camera’s image quality set the FFC Mode to Auto. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to FFC.

◦ Press  to open the setting.

◦ Press  to select Auto.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• To manually correct pixel defects in your camera’s image, set the DPC settings to Manual. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to DPC.

◦ Press  to open the setting.

◦ Press  to select one of the options:

· Auto: (Default) Your camera automatically calibrates defective pixels.

· Press  to start auto DPC.

· Close the lens cap until your camera signals that auto correction is complete.

· Manual: Correct the defective pixels manually.

· Press  to start DPC manually.

·  Press to switch between the X-axis and Y-axis.

· Press and hold  or  to start correction.

· Restore: DPC is restored to original state.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

ACH20-1B Thermal Monocular Camera: Frequently Asked Questions

The following FAQ answers many of the general questions about your thermal monocular camera.

.

How does my thermal monocular camera work?

To improve the visibility of objects in complete darkness, haze, or tough conditions, your thermal monocular camera uses infrared sensors to detect heat given off by a person, animal, or other objects. It creates images of that radiation called thermograms, which display the relative temperatures of different objects with different shades or colors. In a thermogram, warm objects stand out in a contrast or often cooler background. It is widely used in outdoor scenarios for hunting, rescue, animal observation, and more.

Is my thermal monocular camera battery-operated or hard wired?

Your thermal monocular camera is battery-operated, however, to charge the battery you will need to connect the micro-USB cable into your camera’s USB port and the other end into a power source.

Does my thermal camera only work at night?

No. Although thermal imaging cameras are most commonly used for nighttime vision, they can also be useful in daylight. The detection of heat radiation and the high contrast of thermal imaging cameras allow you to see the outlines of (warm-blooded) animals that camouflage well in their environments. It can also help distinguish animals or people in foggy or smoky conditions.

Can my thermal camera see-through walls, metal, or glass?

No, thermal imaging cameras do not see-through surface but detect surface temperatures.

Is thermal imaging and night vision the same thing?

No, thermal imaging can produce pictures without visible light while night vision cameras work by boosting ambient light. Their only common purpose is increasing visibility in low light conditions.

Can bright sunlight damage my camera’s lens?

Yes, aiming your camera’s lens with the lens cap open at powerful light sources (i.e. the sun) is not recommended, as this may adversely affect the accuracy or damage the thermal imager.

What is the clicking noise my camera makes?

This is simply the noise your camera makes while you are shifting it between different fields of view. The noise you are hearing is your camera focusing and calibrating the image to achieve the highest resolution possible.

Should I charge my camera’s battery before first use?

Since your camera’s battery is delivered partially charged, it is recommended that you fully charge it before first use.

How do I charge my camera’s battery?

Your camera has the following 4 battery charging statuses, as shown by the LED charging indicator located under the USB port.

How do I turn my camera on or off?

Press and hold .

Where can I find the mobile app?

The Thermal Connection Application can be downloaded on your smartphone with a valid Internet connection from iTunes or Google Play respectively.

See the article Connecting to the App for more details.

Why do I need to allow my Location Permission on the app?

The app requires permission to detect your Wi-Fi network in order to connect your camera to the app.

How do I connect my camera to the app?

See the article Connecting to the App for full details.

How do I disconnect my camera from the app?

For steps on disconnecting your camera from the app, see the article Using the App.

What is my camera’s Wi-Fi name and password?

Where can I find my camera’s serial number?

Your camera’s serial number can be found on:

• The serial tag located on the side of your camera.

• Your camera’s system information.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to (System Information).

◦ Press  to open your camera’s system information.

How do I record images & videos?

• To capture images: Press 

• To start or stop recording videos: Press and hold  for 3 seconds. A blinking red dot next to a recording timer on the left of the screen indicates that your camera is recording.

Note: Your camera cannot record images or videos while the menu is open or when connected to a computer.

For steps on recording images and videos from the app, see the article Using the App.

How do I zoom in my camera’s image?

To switch the zoom range: Press . Keep pressing to zoom in and out.

For steps on using digital zoom from the app, see the article Using the App.

How do I turn the laser pointer on?

 LASER RADIATION:

Exposure to laser light can cause significant damage to the eyes. Never look into the laser beam directly or through a piece of optical equipment.

To turn the laser on: Quickly press  two times.

For steps on using the laser pointer from the app, see the article Using the App.

How do I change my camera’s color palette?

To quickly change the color palette: Press .

For steps on switching the color palette from the app, see the article Using the App.

Which color palettes can I choose from?

Select your camera’s color palette for enhanced visual representations of thermal imaging. Switch between any of the following color palettes:

Note: Not all color palettes are suited for every situation. Select the option that best shows the thermal differences for your specific application.

How do I measure my target’s distance?

Measure the range distance between your camera and your target using the pre-set ranging modes for animals, people, etc.

• Press and hold  to open the menu.

• Press  or  to navigate to Ranging Mode.

• Press  to open the setting.

• Press  to select one of the options:

◦ Wolf: Measure your distance from a wolf, with a pre-set height of 1.2 m.

◦ Customize: Enter a custom height to measure your distance from your target.

◦ Wild Boar: Measure your distance from a boar, with a pre-set height of 0.9 m.

◦ Human: Measure your distance from a human, with a pre-set height of 1.8 m.

◦ Rabbit: Measure your distance from a rabbit, with a pre-set height of 0.3 m.

• Press  to confirm your setting.

• Press  to exit the menu.

How do I change my camera’s measurement unit?

For steps on changing the measurement unit from the app, see the article Using the App.

How do I track hot & cold points?

Track the hottest and lowest temperatures in your camera’s image at the same time. If enabled, your camera’s image will display a red target tracking the hottest point and a blue target tracking the lowest point.

• Press and hold  to open the menu.

• Press  or  to navigate to Hot Point.

• Press  to open the setting.

• Press  to select one of the options:

◦ Off: Hot and cold points is turned off.

◦ On: Your camera will track hot and cold points.

• Press  to confirm your setting.

• Press  to exit the menu.

For steps on enabling hot & cold points from the app, see the article Using the App.

How do I enable fire detection?

Detect fires in your camera’s image with a red box surrounding the source. If enabled, you can set the fire detection sensitivity from high to low.

• Press and hold  to open the menu.

• Press  or  to navigate to Fire Warning.

• Press  to open the setting.

• Press  to select one of the options:

◦ Off: Fire detection is turned off.

◦ High, Middle, or Low: Your camera will detect fires based on the sensitivity level.

• Press  to confirm your setting.

• Press  to exit the menu.

For steps on setting fire detection from the app, see the article Using the App.

How do I enable the fire detection alarm?

Set your camera to sound an alarm when fire is detected in the image.

Note: The fire detection alarm works only when your camera has fire detection enabled on either High, Middle, or Low.

• Press and hold  to open the menu.

• Press  or  to navigate to Alarm.

• Press  to open the setting.

• Press  to select one of the options:

◦ Off: Fire detection alarm is turned off.

◦ On: Your camera will sound when fire is detected.

• Press  to confirm your setting.

• Press  to exit the menu.

How do I export recordings?

Export recorded images and videos from your camera’s microSD card.

• Press and hold  to open the menu.

• Press  or  to navigate to USB Mode.

• Press  to open the setting.

• Press  to select Mass Storage.

• Press  to confirm your setting.

• Connect the micro-USB cable into your camera’s USB port and the other end into an available USB port on your computer.

• The microSD card’s storage will open on your computer desktop. Select files to export, then copy them onto your computer.

• After exporting, disconnect the micro-USB cable from your camera and computer.

• Press  to select USB Mode Off.

• Press  to confirm your setting.

• Press  to exit the menu.

Where does my camera store recorded images and videos?

Your camera stores recorded images and videos onto the microSD card.

What is my camera’s maximum storage capacity?

You can insert a microSD card with up to 256GB storage space.

How do I hide the icons on the top right of my camera’s image?

• Press and hold  to open the menu.

• Press  or  to navigate to Status Bar.

• Press  to open the setting.

• Press  to select Off.

• Press  to confirm your setting.

• Press  to exit the menu.

How do I change the language displayed in my camera’s menu?

• Press and hold  to open the menu.

• Press  or  to navigate to Language.

• Press  to open the setting.

• Press  to select your preferred language.

• Press  to confirm your setting.

• Press  to exit the menu.

Note: This will only change the language in your camera’s menu, not the app.

How do I restore my camera’s settings to default?

For steps on restoring your camera’s settings to default from the app, see the article Using the App.

How do I update my camera?

Update your camera through the microSD card.

Note: To download the latest firmware update for your camera, contact the Technical Support team.

• Press and hold  to open the menu.

• Press  or  to navigate to USB Mode.

• Press  to open the setting.

• Press  to select Mass Storage.

• Press  to confirm your setting.

• Connect the micro-USB cable into your camera’s USB port and the other end into an available USB port on your computer.

• The microSD card’s storage will open on your computer desktop. Copy the update program to the microSD card.

• Press and hold  and  at the same time for 3 seconds. A blue screen will indicate that an update is in progress.

After a few minutes the update will complete and you will see your camera’s live view image.

Where can I download my camera’s latest firmware update?

To download the latest firmware update for your camera, contact the Technical Support team.

Can I mount my camera to a tripod?

Yes, the tripod thread can be found on the bottom of your camera.

Can I access my camera’s Live View from an external monitor?

Yes, you can access your camera’s Live View from your computer by connecting your camera using the micro-USB cable.

What is the buzzer option in the app settings?

The buzzer is not compatible with your camera.

ACH20-1B Thermal Monocular Camera: Connecting to the App

Follow the steps below to connect your thermal monocular camera to the Thermal Connection app.

Note: The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: Wi-Fi 2.4 GHz (2.4 GHz to 2.4835 GHz) 20 dBm.

.

Step 1 – Download the App

Download your camera’s mobile app, Thermal Connection.

.

Step 2 – Enable Your Camera’s Wi-Fi Hotspot

Looking into your camera:

• Press and hold  to open the menu.

• Press  or  to navigate to WiFi.

• Press  to open the setting.

• Press  to select AP (Access Point).

• Press  to confirm your setting.

• Press  the exit the menu.

Step 3 – Connect to the App

You will now be able to view your camera from the app and make some minor setting adjustments.

.

<p>The post Thermal Monocular Camera user manual first appeared on NVR IPCAMERA SECURITY.</p>

VOSKER V300 Ultimate Camera Setup and User Guide

HOW TO UPDATE YOUR V300 ULTIMATE CAMERA FIRMWARE

VOSKER V300 Ultimate
.

Latest firmware released: January 23, 2024

Installation instructions for PC :

Installation instructions for MAC :

How to Install your V300 Ultimate Camera

Before installation

Verify:

What you’ll need for installation

Choose between:

Recommended installation – Camera

Recommended installation – Universal Solar Power Bank

For more information on how to install your VOSKER camera to get the best picture quality, read the article “What Can I Do To Increase My Photo Quality?”.

Download:

› Quick Start Guide (PDF)

Troubleshooting steps:

If the Universal Solar Power Bank is discharged, charge it by plugging the DC power adapter in the 5 V IN port.

CAUTION:

WARNING: Failure to follow these safety instructions may result in fire, electric shock, damage, or other injuries. This power pack is not a toy. Keep away from children and operate outside.

.

HOW TO INSTALL YOUR V300 CAMERA

Before installing your camera, we recommend that you test the coverage of the location you will be placing your camera. Consider using a VOSKER security box to protect your V300 security camera against theft and breakage.

Here are some of the best practices for installing your VOSKER camera:

Note: Make sure to place the camera in an area that gets a good amount of sunlight during the day (enough to cover 50% of the solar panel). This will help maximize the battery life of your camera.

For more information on how to install your VOSKER camera to get the best picture quality, read the article “What Can I Do To Increase My Photo Quality?”.

.

HOW TO ACTIVATE MY V300 CAMERA?

Before activating your camera:

Note: A 24-hour charge of the battery unit is recommended before the first-time installation.

Activating your camera with VOSKER mobile app:

Activating your camera with the VOSKER web app:

Turning your camera on:

The V300 powers on and secures a strong signal.

Note: There may be a 20-120 seconds delay for the camera to make the first communication or transfer the first photo/video to the app.

EVERYTHING YOU NEED TO KNOW ABOUT V300 LIVE STREAMING

A strong cellular signal on both devices will ensure smooth live streaming.

The V300 series offers the amazing feature of live-streaming as a 40-minute add-on that can be shared between compatible devices over a 12-month period.

Want to test it out first? Upon activation, every V300 includes two minutes of live streaming during the free seven-day trial period.

How to start a live-streaming

What is the difference between live-streaming and 10-second Full HD video?

The live-streaming allows you to see what is happening live around your camera. It can last as long as you have live-streaming minutes in your account. It is great when you receive a notification, and you want to check if there are still some movements.

Your camera stores a 10-second Full HD video on the servers at every detection. You can request the video to understand better what happened during the detection. Simply click on a photo and press the button “Request Full HD video”.

What is the impact on the battery life?

The more you use those features, the more it takes a toll on the battery life.

This is especially true if the V300 doesn’t get a steady and strong signal. Just like your cell phone, the camera will work harder to connect to the cellular tower and communicate information.

If you see the battery life dropping, consider adding the Universal Solar Powerbank to sustain your camera from 6 to 12 months.

How to buy additional live-streaming minutes?

You can easily purchase a live-streaming add-on which will add 40 minutes shareable among all VOSKER streaming devices for the next 12 months.

Mobile app:

Web app:

Warning: you need a transmission plan (Base, Alerted or Elite) before buying the live-streaming add-on.

.

<p>The post VOSKER V300 Ultimate Camera Setup and User Guide first appeared on NVR IPCAMERA SECURITY.</p>