We can talk directly on phone app for asking courier to put package to a certain place you point, and hear sound from app or TV monitor connected to NVR

We could be alerted any time a person enter your property by receiving push notification from free phone APP, and the alarm light will be triggered to drive away the suspicious objects ( Note: APP has No Monthly Fees)

High Resolution 2592 X 1944 pixel to provide your vivid and clear image no matter in day or night, and IP 67 Waterproof to withstand Changeable Weather like Snowy/Rainy Day

We can customize the surveillance area or set a line for human/vehicle, and the alarm alerts will be triggered when detecting human/vehicle crossing the line or intruding the alarm area （These function may only work with Hiseeu NVR）

Version 2020-2022 PoE System FAQs in total

.

Further support, plz email us at email love@hiseeu.com

Or contact us at +1 917 688 2228

.

Important Notes:

These FAQs are only adaptable to following Models NVR Model : H5-NVR-P-8,

Camera Model: HB215-PA, HB212-PA, HB915B-PA

Mobile Phone APP: XMEye Pro         PC Client :VMS

Hisseu PoE Camera System User Guide v1

Contents:

A:  Forget NVR Password?

B:  Add Device on PC Client Software (VMS）?

C:  How to Sign up account on Mobile APP (XMEye Pro) ?

D:  Add Device on Mobile Phone APP (XMEye Pro)?

E:  How to enable Alarm Notifications on APP XMEye Pro?

F:  Configure Offline Camera or Add a New Camera?

G:  No Video Display on TV Monitor Or Blank Screen?

H:  Why DVR/NVR can’t record or playback video?

.

Detail Solutions:

A:  Forget NVR Password?

1. Please click the mouse from the home screen, and “Logo Out–>Log Out”

2. Right click the mouse again, click “ Main Menu”–> “Forget password –> Forget answer”, you will see the “QR Code”

3. Please open your mobile APP “XMeye Pro”

（1）Click the Scan icon on the top left corner

（2）Scan the “CAPTCHA” on the TV monitor, then you will get a code from the mobile phone APP or from your email, and enter the code into “CAPTCHA”, so you will be able to reset the password on the Monitor connected to DVR

.

B: Add Device on PC Client Software (VMS）?

VMS download link:

For Windows （2023 newest version）

https://download.xm030.cn/d/MDAwMDE0OTM=

For Mac ( 2022 version)

https://download.xm030.cn/d/MDAwMDA2NDA=

1. Download PC Client “VMS” and installed

2. Login with the default User Name and Password. Click “SIGN IN”.

Default User name is: admin

Default Password is: admin

3. Navigate to “Device Manager”–>”Manual Add”

4. Login Type: Cloud ID Device Name:

Name Your Device as you like

Cloud ID : Device Serial Number. We need to go to the TV Monitor connected to the NVR , and find out the information on TV Monitor UI, then right click the mouse to navigate to the path of “Main Menu–>Advanced–>Version” to find out the information “serial number”

User Name and password: Input the user name and password that you created for the NVR , and we also need to find this from the Monitor UI.

.

5. Navigate to “Live View”, Click on the device name(serial number), then select “Open All By Sub Stream”

.

C:  How to Sign up account on Mobile APP (XMEye Pro) ?

Please follow these instructions to sign up for an account via your mobile number.

1. Click on Sign Up

2. Sign Up by email or Select Mobile Number

3. Select the correct country code +1, input your mobile number and click on “Get code”

4. A code will be sent to the mobile phone number, input the verification code and continue.

.

D:  Add Device on Mobile Phone APP (XMEye Pro)?

Steps:

–>1. Please connect the NVR/DVR box to your Router via Network Cable; (Some customers think it can support WIFI connection, while wired systems only support wired router connection, and have to be wired to router via ethernet cable)

–>2. Go to Monitor UI Interface, and Navigate to “Main Menu > Network > Net Service”, if the “Cloud Status” shows connected, means NVR/DVR is online (Please skip step3),

–>3. If the cloud status shows “Probing DNS”, Please Navigate to “Main Menu > Network > Check the icon of “Enable DHCP”–>Apply;

–>Reboot the DVR by unplugging the power adapter and re-plug it, then double-check the cloud status ( only cloud status shows )

–>4. Go to your TV Monitor, navigate to “Main Menu–>Advanced–>Version”–> You will see the serial number.

The QR code contains Serial number info. We need this information after we add the device to mobile phone APP

–>5. Open the mobile APP “XMeye Pro” and register an account by your email first

–>6. Click”+” to add device–>Choose “NVR”

Device Serial Number: Click the “Scan” icon to Scan QR Code On the NVR UI Interface (Main Menu–Advanced–Version), (QR code contains username and password)

No need to input the username and password manually.

And click “OK”, and go back to the Device page on App,and you will see the device shows status:online ,

E:  How to enable Alarm Notifications on APP XMEye Pro?

1.Make the Alarm setting is already set on Monitor UI Interface

2. Please right-click mouse and navigate to “Main Menu–> Alarm–>Motion Detect/Human Detect/Face Detect–> Enable “Mobile Reported”–>click “OK”

(Default Setting is for Channel 1, Please select “All” channels.)

2.Open “XMeye Pro” mobile App, and navigate to “Event–>Device (the one you named)–>Enable “Allow Notifications”

.

F:  Configure Offline Camera or Add a New Camera?

—>1. After connect the camera to NVR via network cable, if the camera power on properly, the camera’s indicator light should be blinking.(see picture attached)

.

When you cover the camera’s photocell or put the camera in dark place, the infrared LED should turn on red color.

—>2. If camera powered on properly please follow below instructions.

1.Right-click mouse navigate to “Quick Setup(or Channel Set) –>Cancel

2. In the second box, if any camera status is offline or not connected, please select it and click ”Delete” first

3. Click “Search”, can you see new IP address showed on the topper box?

4. Select the IP address in topper box and click Network–>Auto Assigned–>OK

5. If auto assigned successfully, please click “Add” to add the camera.

.

.

G:  No Video Display on TV Monitor Or Blank Screen?

My UI Interface shows “No signal” or “Black Screen” ？

We need to divert this issue into two situations:

1.NVR Indicator light is on:

(1) Cause: The camera system’s video output resolution is 1080P. If your TV monitor resolution is below 1080P, this issue will occur.

Steps:

Please right-click and hold your mouse for over 10 seconds to see if the system can reboot or not. Or, please try to connect the system to another TV monitor with a higher resolution (above 1080P)

.

(2) Cause: The hard disk drive inside of the DVR box is broken, and use the screwdriver to open the DVR box to unplug the wires of the hard disk drive, and reboot the DVR to have a try. If the DVR box can be rebooted after unplugging the wires of the hard disk drive(HDD), which means the HDD is having an issue, and needs a replacement, plz contact email love@hiseeu.com for replacement HDD

After steps, if the thing still cann’t be resolved, which means the NVR box is broken, plz contact email love@hiseeu.com for replacement NVR box if their warranty is still 1 year

.

2.NVR Indicator light is off:

(1) Cause: The power adapter 52V 2.5 A connected to the NVR box is broken

Step: Use another power supply 52V 2.5 A to power on the NVR unit to have a try ( If you do not have a spare one, can contact us to buy a new one or we send you a new one if your warranty is still under 1 year )

.

(2) Cause: The hard disk drive inside of the NVR box is broken Step: Use the screwdriver to open the NVR box to unplug the wires of the hard disk drive, and reboot the DVR to have a try. If the NVR box can be rebooted after unplugging the wires of the hard disk drive(HDD), which means the HDD is broken, and needs a HDD replacement, plz contact email love@hiseeu.com for replacement HDD

.

H:Why DVR/NVR can’t record or playback video?

.

If HDD(Hard disk drive) is having issue or something wrong with record setting, the DVR can’t record/playback the video

.

1.Check if the hard drive status is normal or error

Navigate to NVR/DVR Monitor UI Interface: Navigate to “Main Menu–>Advanced–>HDD info”

If status shows “Error” or No hard drive info , which means the hard drive is broken. (need to replace hard dirve)

2.Check the record plan is set up for 24/7 continuous recording

Navigate to “Main Menu–>Record Conf”

Channel : select “All”

Period: “00:00-24:00”

Select “Regular”

3. Please make sure the HDD was set up to “Overwrite”. (if it was set to “stop”, the system would stop recording when the storage is full)

Navigate to “Main Menu–>General–>Storage Full”

Add Device on Guard Station PC Client Software

Add device to “Guard Station” Download link: https://www.dropbox.com/sh/jeftu4sqwy4y1u8/AAD4PkyEJxg6j4H1n20PxBkZa?dl=0  

.

Please sign up for the mobile APP(Guard Viewer) account and add the device first.

Download and run “Guard Station” on the PC

1) Please Navigate to “Device Management”> “Cloud Device”> Click on “Login”

2) Login with your APP account and password.

3) After Login, the device you added to the APP will list here

Please click on “Control Panel”> “Live View”> Double-Click Camera to load the live view video

Add Cameras to NVR or PoE Switch (Router)

Add Cameras to NVR/ PoE Switch or Router

1. Add camera via NVR PoE Port

• If the camera is connected to NVR PoE port directly, the IP address

range should be modified to “172.16.0.X” (X is between 2 to 255)

Please right-click mouse and navigate to Camera

For brand new camera (password is 123456 by default), NVR will detect

and add camera automatically.

If the camera’s user name or password has been changed, you are required to input the info manually.

Move the mouse to the status icon , you will see the error message. “Offline [incorrect Username to Password]”

Please click on the edit icon to input password manually and click on “OK” to continue.

2.Add Camera to NVR via PoE Switch or Router

NVR will detect the camera under the same WLAN and list IPC here

• Click on plug icon to add the camera. If the camera has default user name: admin, password: 123456.

NVR will add it automatically.

• If the camera’s password has been changed, please click on the setting icon to modify the info.

• In this situation, the camera IP address range should be the same as NVR’s IP range

(You can check NVR IP by navigating to Network>Basic> TCP/IP). If not, please contact the technician to modify the camera’s IP first.

Camera Not working

Camera not working?

1.(Port issue) Insert the camera to another port of the NVR to have a try, and wait at least 5 minutes

2. (Camera issue) Make sure if the camera infrared light will turn on red or not in the night time

3. Also plz right click your mouse to “Menu-Camera”, and take a photo of this whole page and send it to us

（Check how many cameras are discovered）

Also go back to the home screen and Check connection status, to see if it shows” Network disconnected” or “incorrect user name and password”

Device Offline on APP or NVR?

Device Offline on APP or NVR?

If the device shows offline on mobile phone app  “Guard Viewer” , we need to make sure the NVR is connected to network perfectly or not

Go next to your Monitor that connected to NVR, and check out the network status

first navigate to this path first : “Menu–Network–Basic–P2P” , also check the device status is online or not,

if it shows: network disconnected, plz enable the DHCP in this path ” Menu–Network–Basic-TCP/IP ” and click “Apply” . After that, go back to “P2P” and check if the device status is online or not

Also , please make sure the PPPOE needs to be disabled, plz navigate to “Network–Advanced–PPPoE”

Enable Alarm light on Each Camera?

Enable Alarm light on Each Camera?

.

(Alarm light would only work during the night time when the alarm was triggered)

.

1. Set up the Alarm light First Right-click your mouse to “Menu– VCA — Intrusion Detection/Crossing Line Detection– Triggered Actions” , and draw the rules for the alarm type

After you set up an alarm type (Like”Intrusion Detection”, or “Crossing Line Detection”), Click on “Alarm Linkage”, you will have the option to Enable “Alarm Light” (Spotlight is only Available During the Night)

2. Enable Alarm Light on “Triggered Action– Alarm Light” for each channel, and Click “OK”

Forget NVR Password？

If you forget your current password, please follow the instructions to reset it.

1. In the system login interface, please click on “Enter Password” > “Forgot Password”

2.If you filled in your email address as a reserved email when you set up the system, you can reset the device password via the APP(Guard Viewer) by navigate to “Me–General–Forget Device Password”

3.Scan the above QR code by app and the security code will be sent to your email address.

4. Enter the security code from email to reset the password

Additionally, If you the email doesn’t belong to you, plz contact us at love@hiseeu.com for more support

Add Device to APP(Guard Viewer)

.

Auto add is not suggested. Please tap on “Later” if you see this message box.

.

In this situation, it will Auto Search to discover the NVR device connected to the local network. But once your mobile phone disconnects with LAN WiFi, you will not be able to view it anymore.

Please Add devices in this way

1.  Please Tap on “ Menu” icon> Tap on “Devices”> “Add”,

2. Tap on “Scan”> “OK” to scan the NVR QR code

3.Navigate to “Menu– Network> Basic> P2P”

• If the Device Status is “Network connected…” , means device is online   and ready for remote view

• If the Device Status is “Offline” , please check the network connection first, if the problem remains, please feel free to contact us at Love@Hiseeu.com   

After you add the device successful, the “Device status” will be “Online”, and your APP account username will display here.   • You can check your APP user name by navigate to “Me”

• If the username doesn’t belong to you, please click on “Delete” and add it again.

4.Add NVR by scanning device QR code and click on “save”

5.   Please Tap on “Menu ” icon, Tap on “Live View” “Add”

6. Select the device and tap on “Start Live View”

Human Tracking/Detect for Model PK-4YHD985-CT ?

1.To enable human tracking , Set preset point “21”. Here is the video link for your reference: https://www.amazon.com/live/video/07adae4ec34a47618bd754cc6c1f8966?ref_=dp_vse_ibvc1

2.To enable human detection, plz go to this path “Menu–Alarm-Motion” , and choose the camera you want, to enable it

(This doesn’t support customize area)

No Video on TV Monitor or blank Screen?

.

The camera system video output resolution is 1080P, if your TV monitor resolution below that will occur this issue.

.

If possible, could you please try to connect the system to another TV monitor with a higher resolution(above 1080P).

Or, please hold your mouse wheel over 10seconds to see if the system can reboot or not.

If not, plz contact us for further support

How to share Device to others via APP Guard Viewer?

.

One device linked to One User ONLY. The NVR system ONLY can be controlled by one authorized account, who can share the device with others in order to prevent attacking or hacking.

For admin user, please follow the instructions to share the device with others:

.

1.Type on “Menu Icon ” and navigate to “Devices”

.

2.Tape on “… ” > “Share”, You can select a single channel to share or select the entire NVR system to share

(1) Share device by typing in the user name you wanted to share with and selecting function as needed.

• The other user needs to register a Guard Viewer APP account and provide the user name for sharing.

• After that, when this user login the APP will find the device by navigate to “Devices”

(2) Share device by generate a QR code

• Create a sharing password and set the valid period

• Click “Generate”, your APP will generate a QR code

• Other users can use the APP to add the device by scanning the QR code you sent

Download the mobile APP and Sign up for an Account

.

1. Download and install the app.

Please scan the QR code to download the free APP “Guard Viewer”

You also can visit the Apple Store or the Google Play Store to download the Guard Viewer app for iOS or Android devices. Alter installation, tap the icon to launch the app.

2.Register an account and login

For first time use, please create a new account and add the following steps:

Please tap Sign up and follow the on-screen prompt to register an account by email.

<p>The post Hisseu PoE Camera System User Guide v1 first appeared on NVR IPCAMERA SECURITY.</p>

Access from smartphone

(1)Download APP

Search and download “Eseecloud” app from App store or Google play on your phone.

.

(2) Register

 If you install and open “Eseecloud” app at the first time, an account need to be registered initially.

ce”.

.

(3) Add device

Method 1: Add the device via QR code.

EseeCloud Devices Advanced User Guide

Read Next : EseeCloud Wireless Security Camera System Installation.

.

Method 2: Add by cloud ID.

     Cloud ID: Enter NVR’s System Setup – Network Setup to input Cloud ID or Scan QR Code)

     Device name: Choose a name for your system of your choice.

     User Name: Enter the NVR’s User Name (default: admin)

     Password: Enter the NVR’s Password (default: NO password)

.

.

Method 3: Add by LAN scan.

Please make sure you are connected to the same wifi.

.

Access from remote PC

1. Access from remote PC (Log in with Cloud ID)

Operation Steps: ( We suggest you to use microsoft IE, otherwise some services will be invalid. )

1. Open your browser

2. Enter http://www.e-seenet.com

.

Cloud ID: (Enter NVR’s System Setup-Network Setup to input ID or Scan QR Code)

Username: Enter the NVR’s User Name (default: admin)

Password: Enter the NVR’s Password (default: NO password)

3. Enter the correct device ID, user name and password.

4. Click login to enter live view interface.

.

Note: To successfully remote access your system, the device ID should be ONLINE.

.

2. Access from PC Client (CMS)

1. Please download CMS from the below link:

http://www.tontonsecurity.com/download/page_show_67.html

2. Login user: admin, password: (default: NO password, please keep it blank)

3. Please enter “Add” to add device, you can add it “By IP/DDNS” or By Cloud ID”

4. By IP/DDNS:

IP/DDNS: (Enter NVR’s System Setup-Network Setup to find IP)

Port: (default: 80)

Username: Enter the NVR’s User Name (default: admin)

Password: Enter the NVR’s Password (default: NO password)

Device name: Choose a name for your system of your choice.

Type: choose “NVR”.

Number of Channels: please input the correct number of the channels.

Click “Finish” and go back to “Preview”, click the device name to view live video.

5. By Cloud ID:

Cloud ID: (Enter NVR’s System Setup-Network Setup to find IP)

Username: Enter the NVR’s User Name (default: admin)

Password: Enter the NVR’s Password (default: NO password)

Device name: Choose a name for your system of your choice.

Type: choose “NVR”.

Number of Channels: please input the correct number of the channels.

Click “Finish” and go back to “Preview”, click the device name to view live video.

Add the IP camera to the NVR by matching code

1.  When you use Match Code
1.1 Add new add-on cameras to your system
1.2 Re-pair camera to NVR when they lose connection. You need to delete the
Network Unreachable channel at first, then re-pair the camera to an unoccupied
channel. (unoccupied channel always shows No Video Source under Status.)

Tips: The IP cameras in pre-packed kits have already been paired to the NVR. So the
cameras will automatically connect to the NVR once they are plugged in power.

2.  Add camera by matching code.
2.1  Power on the camera which has no video, and connect this camera to the NVR
via Network cable.

.

2.2  Right click mouse on the main interface, select “Video Manage“

2.3  Click “Refresh“, find the camera’s IP. Click “Match Code“, then click “Yes“, the
NVR will start to match code to the camera.

.

2.4  After matching code successfully, the “status” will show “Connect success“.

Then you will see the camera is added to the NVR and display video on the screen.

.

What is the WiFi distance of the wireless kits?

.

Between each camera to the NVR:

In open space we tested 350m (1150ft) working distance;

With normal obstacles like 1-2 walls, we tested 35m (115ft) working distance.

For distance we only have theoretical values.

No certain distance can be guaranteed due to different environments applied in.

It varies depending on obstacles and signal interference.

on the contrast, if there are many blocks and signal interference between, the distance could be closer. 

.

What if your NVR system keeps beeping?

1. Please right click your NVR mouse, then click System Setup – General Setup – Error setup, make sure that “Enable” and “Buzzer” are unchecked.

2. Please right click your NVR mouse, then click System setup – Channel setup –  Video detection, make sure that “Buzzer” is unchecked for all channels.

3. If you have checked above 2, and none of the buzzer are checked.

    Follow below to stop the beeping:

    a. Right click your NVR mouse, then click System setup – System Admin –  Factory setting, uncheck WiFi Reset, then click Apply to reset NVR settings.

    b. If you cannot view the cameras on the NVR after resetting, please right click your NVR mouse, then click Exit system, choose shutdown. Follow on-screen message to unplug NVR from power and then re-plug it back to NVR. Wait for NVR to initialize.

Then the cameras shall come back.

.

How to upgrade the NVR system

.

.

1. Please download the update file to your computer and unzip it, then plug the USB flash drive,and move the unzipped update file to the root directory of the USB flash drive. 

Note: 

1)Please move the update file to the root directory of the USB flash drive, do not move the subdirectory.

2)Do not change the file name.

.

.

2. Connect USB-disk/mouse and USB hub with NVR shown as flowing.

.

.

3. Enter the NVR’s menu (System setup\System Admin\System upgrade),
Click “Start” to begin upgrading.
.

Note: Please keep power supply well during the upgrade.

.

.

4. Once the upgrade is done, NVR will restart system automatically.

.

.

How to view playback on NVR system

.

1. Right click the mouse , choose video playback

.

2. In the menu bar on the right, choose record type/channel/data to search what
you want to and click playback.

.

3. Click Backup and the video will be saved in USB storage

.

How to Add C8601 Cameras to Tonton NVR System

.

Document

.

or

.

Video

.

How to connect and set up the Wireless Network Camera System?

.

.

1. Connect the DC 12V/2A power adapter to the Power port of the NVR.

When Power indicator light is on, NVR starts to work.

2. Use VGA / HDMI cable to connect your NVR and Monitor / TV, then preview interface can be seen.

3. Plug the network cable and mouse to the ports of NVR rear panel.

4. Connect the DC 12V/1A power adapter to the IP camera (IPC).

Each camera has one 6ft length power adapter.

5. After finish connecting, the NVR will search the IPC automatically and start to initialize the connection.

When completed connection, the images will display.

6. Login this system:

Username :  admin

Password:  (there is no password, please keep it blank)

(Note: if you want to change the password, you can go to NVR’s System Setup – System Admin -User management – Set password to change it.)

7. Then you can follow up the below steps to set up on your phone:

If you want to view the cameras remotely, the NVR should be connected WAN network, Please ensure DHCP in your Router is open.

If you don’t know how to enable the Router’s DHCP, please input the IP Address of your  

Router to IE browser, then you will find the network information, you can enable the “DHCP”.

After that, please go to NVR’s System Setup – Network Setup to enable “DHCP”

Then the system will obtain the IP Address, DNS from your Router automatically.

Or you can go back main menu to select “Fast Network”, Then the system will connect the WAN network automatically.

8.   Access from smartphone

(1). Please download “Eseecloud” app from App store or Google play on your phone.

    (2). If install and open “Eseecloud” app at the first time, an account need to be registered initially.

(3) Add the device.

Method 1: Add the device via QR code.

.

.

Method 2: Add by cloud ID.

Cloud ID: Enter NVR’s System Setup – Network Setup to input Cloud ID or Scan QR Code)

Device name: Choose a name for your system of your choice.

User Name: Enter the NVR’s User Name (default: admin)

Password: Enter the NVR’s Password (default: NO password)

.

.

.

Method 3: Add by LAN scan.

Please make sure you are connected to the same wifi.

.

.

9. Access from remote PC (Log in with Cloud ID)

    PC : our item only support IE browser, please input “www.e-seenet.com” to IE Browser to view your cameras.

       Cloud ID: (Enter NVR’s System Setup – Network Setup to input ID or Scan QR Code)

       Username: Enter the NVR’s User Name (default: admin)

       Password: Enter the NVR’s Password (default: NO password)

(Input the correct Cloud ID, user name and password, click login to enter live view interface.)

.

NVR video backup.

1.Right click mouse > select Video backup.

.

2. Enter into the interface of Video backup.

   Select Channel, Record mode and Search time.

   Click “Search”. After that, the chosen video will display in the list.

3. Select the section which you want to backup.

   Then, click the bottom “Backup”.

4. Next, there will pop up a dialog box asking are you sure to backup this record.

   Click “Yes” if you are sure.

   Before start to backup, system will inform you to insert U disk within one minute. 

   If you want to cancel the operation of backup, you can click “Cancel” to withdraw.

   NOTE: The NVR only one USB port, so you have to unplug the mouse

and plug the U disk within one minute.

5. After you insert U disk, what you should do is just wait a moment.

6. Backup is completed when system inform you “Backup record succeed“.

   And you can unplug your USB disk at that time.

.

How to setup audio function?

1. System connection

(1) The monitor must have HDMI input port.

  (2) Connect the HDMI port on both sides with the included HDMI cable.

2. NVR setup

  (1) Choose the option “Private” on this interface during NVR’s restarting. It allows you select audio or not.

(2) Check whether the encode mode is “AV stream” or not.

(3) On the live window, click mouse to select any channel to pop-up the hidden volume icon like a speaker, click it repeatedly to hear or mute the sound from camera.

.

How to use a new Gmail mailbox account to set NVR mail alarms?

How to use a new Gmail mailbox account to set NVR mail alarms?

1.Register a new Gmail mail account, and log in.

2.Get into your mailbox>click the “” in top right of page>get into “My Account“.

3.     Click “Sign-in&security” and enter the interface,Turn on “Allow less secure APP on“.

4.  After that, you will receive an email from Google, which means “less secure sign in” has been turned on.

5. Get into NVR system. Right click mouse>select System setup>Network setup>Network Status.

   Check if your NVR’s network connected successfully.

   Before operate what mentioned above:

    Make sure Cloud(P2P) display “ONLINE“.

   Make sure the Network Status display “Healthy Network“.

6.Then, click the “E-Mail”. 

Input your Gmail SMTP Server (smtp.gmail.com) in ” SMTP Server” Input your Gmail account in “Username” and “Sender”.

Change the “Encryption Type” to “TLS”.

Input your Gmail password in “Password”

Input your two inbox address in “Sendee 1\2” 

After that, click “Apply”>click “Test”.

7.        When the system remind you “Test successful”, which means NVR’s mail alarm is set successfully.

8. PIR video detection setting as below picture:

    (1). Click “Channel setup” and “Video detection”

    (2). Choose Motion Detection, disable it

(3). Choose PIR Input Armed Detection, Enable E-mail Notice

9. After finished setting, When alarm is triggered, you will receive email from NVR.

PIR alarm setting

Only PIR detection recording setup

1.      Disable motion detection function, click ok to save

2.      Choose Detection Model with PIR Input Armed.

Please noted: If you want to set Buzzer, Email notice or App alarm, you can enable them, in this way, you will get notification on email or App.

3.      Press “Reset” to clear default setting

.

4.      Click the icon “Alarm”

5.      Press and drag the left button of the mouse to select needed schedule.

6.      Click ok to save

7.      Cancel the manual recording mode

.

.

.

8.      Once the PIR detection is trigged, the live window will display an icon like below, it means PIR recording is running

.

How to Reset NVR’s Password

Reset NVR’s Password

1. The interface when you log in. 

 2. Click “OK”. If you input incorrect password,

     monitor will display “Username/Password Is Incorrect!”.

 3. Continuously and successively click left button and right button in blank space of prompt box for six times.After that, monitor will display “Restore default user”.

4. Click “Yes”, and you will access to the interface where you can reset NVR’s password.

Tips:   1. The username must be “admin”, or else the password won’t be retrieved.

           2. If you want to make new password, please leave it blank in column of “Old password”.

           3. Delete the old password after reset the new one.

           4. If you have set a new password for NVR, remember that NVR password cannot exceed 10 characters, or the NVR will not save it correctly.

.

 reset NVR’s password             click to download video

How to install iSmkit PC client 

.

How to install iSmkit PC client                  Click here to download

Gmail Mail Configuration Guide

(DE) Gmail Mail-Konfiguration Anleitung 

click here to download

.

(FR) Guide de configuration de Gmail Mail 

click here to download

.

(CN) Gmail邮件配置指南操作步骤20230922

click here to download

.

(EN) Gmail Mail Configuration Guide 

click here to download

.

Email SMTP and POP3 settings

.

click here to download

.

Solve the problem of the white light always on(Applicable to 3.6.60 and above Version)

Precautions:

1. Please check your IPC version first, only 3.6.60 and above version can be solved the problem through upgrade.

2. The camera must be able to produce the image, if the camera can’t be viewed or resetted, it can’t be upgraded.

.

Check IPC Version:

Go to “System Admin” – “IPC Maintenance” to check the version of the problem camera. Please note: Don’t upggrade the version 3.6.16 and below version with these upgard file.

.

Download the upggrade file:

For 3.6.60 Version: Download Link

For: 3.6.60 Above Version: Download Link

.

Upgrade Method

1. Upgrade the IPC via NVR system

（1）Please download the update file to your computer and unzip it, then copy the update file(IPCAKV3C_xxxxx.rom) to a USB flash drive. Please note: Don’t change the file name

（2）Plug the USB flash drive to the NVR’s USB interface

Enter the NVR’s menu (System Setup-> Channel Setup-> IPC Upgrade)

.

.

（4）Click the “Channel” and select the upgarde channel of the IPC.

.

（5）Click “Start” and “Yes”, the IPC will be upgrading. Please note: During the upgrade, please don’t power off the NVR and the camera.

.

.

（6）If the camera upgraded successfully, the Status will show “Success!”.

.

.

2. Upgrade the IPC via TF card.

.

.

（1）Unzip the upgrade file, then copy the “help.rom” file to the TF card. Please don’t change the file name and move it to the root directory, do not move the subdirectory.

（2）Power off the camera, then insert the TF card to the TF card slot. Then power on the camera.

（3）Waiting for about 1 minutes, the camera will start up. Then press 3 times continuously of the reset button for the camera(In order to prevent operation errors, you can press several times, which will not affect the upgrade).

（4）About 2 seconds later, the camera will makes a sound for an upgrade. Then waiting for about 2-3 minutes, if the camera restart and works normally, it means that the upgrade is successful.

New Manual for Dual light

Click here to download

If the IP camera doesn’t work with NVR system,please check …

1. First of all,please confirm both of the camera and the NVR are powered on .

(1) Camera is powered on: Please plug the power adapter to the camera ,and then cover the IR-Cut with your hand (See picture), finally to check if the night vision will be activated or not .

(2) NVR is powered on : Please plug the adapter to the NVR ,and then see whether the power indicator is on.

.

.

.

.

2. Secondly please enter NVR system — Video Manage ,and check if the status of camera is connected successfully or disconnected. 

.

.

.

3. Thirdly, if the camera is disconnected,please confirm the distance of the camera and NVR system. The far distance will affect the signal transmission.Please follow the below steps to fix the issue:

.

(1) . Please enter NVR system —  Video Manage — delete camera (The same page as the Step 2)

(2). Remove the camera and take it next to the NVR system,and prepare a network cable and start to match code for the camera and the NVR.

(3). How to Match code :

A. Connect this camera to the NVR via Network cable.

B. Right click mouse on the main interface, select “Video Manage“

C .Click “Refresh“, find the camera’s IP. Click “Match Code“, then click “Yes“, the NVR will start to match code to the camera.

.

.

D. After matching code successfully, the “status” will show “Connect success“.Then you will see the camera is added to the NVR and display video on the screen.

.

4. Finally, you could unplug network cable and put the camera to the place where you want .

How to change the channel

.

.

1.Please click “Video Manage”.

.

.

2.Make a note of the camera IP address you want to change.

.

.

3.Click “Manual Edit” and enter the IP address on the corresponding channel.

.

.

How to fix black screen Monitor for 10” /15.6”NVR

click here to download the operation video

.

How to get the NVR system ONLINE?

.

1. Please make sure you enabled DHCP of your Router.

2. If you don’t know how to enable the Router’s DHCP,

    please input the IP Address of your Router to your computer browser,

    then you will find the network information, you can enable the “DHCP”.

3. After that, please plug a network cable to the WAN port on back of NVR.

4. If the system refuses to go ONLINE?

Basic troubleshooting:

  (1).  Check if your network cable can work well.

         If NVR is getting signal, there should be flash light. If not, please check the connection and cable.

  (2).  If the port is right and NVR is still OFFLINE, then it should be DHCP issue.

         Enable DHCP on your NVR.

        Click right button of mouse, go to NVR’s System Setup – Network Setup – check the DHCP and enable it,

        apply and save it. Wait for 1 minute to see if the status on bottom right corner changes to ONLINE.

5. Or you can go back main menu to select “Fast Network“, 

        Then the system will connect the WAN network automatically.

        Within 1 minute, you shall see NVR status changes to ONLINE and the NVR is ready to be viewed

        from anywhere anytime.

6. If this can’t help you, probably your Router disabled DHCP or block new devices from connecting.

    What DHCP does is: when Router find new device connected, DHCP allocate new IP to the device

                              and connect it to the Internet.

   An easiest way to know if your router enables DHCP:

   When you connect a new device to your WiFi for Internet service (or a visitor/ friend wanted WiFi

   connection), does it require WiFi password only? If only password required, then your router has

   DHCP enabled; if that requires not only password but also some settings, then your Router is secured

   from connecting new devices. Please ask people who secured the WiFi (who set password) to enable

   the NVR to connect.

The Step 4 and Step 5 should enable 95% users to get NVR ONLINE.

Even if the status shows OFFLINE after all this, we suggest you to use APP and access the Cloud ID

to see if it works.

Note:   Always wait for 1 minute after any change.

.

Advanced troubleshooting

If the basic steps above does not solve the issue. Follow below steps to do further troubleshooting.

1. Make sure the cable you connect to NVR has Internet access. 

Please use a laptop or any PC has RJ45 port

· Disable the wireless connection of laptop.

· Unplug the network cable from NVR and plug it into the PC, see if the PC can access the Internet via the cable.

· If it does, then the cable is good; if it does not, change a cable.

· If cable is good yet no Internet connection, please ask help from your network administrator

· to give the cable Internet access.

2. Enable DHCP of your router, please refer to Step 2.

.

If you don’t want to use DHCP, or you want to set up a static IP Address for your NVR system,

you can follow the below steps to set up:

   Well, we can allocate IP manually for the NVR and connect it to Internet. 

  1. Know your router gateway. 

  This is the IP that goes to the menu of your router. 

  This will vary slightly from manufacturer to manufacturer, and will be listed in the documentation.

  Here are some common IP addresses for various routers:

   Linksys, 3Com, Asus, Dell, US Robotics: 192.168.1.1

   Qwest (AKA CenturyLink), DLink, Netgear, Trendnet, Senao: 192.168.0.1

   Belkin, Microsoft, and SMC: 192.168.2.1

   Apple: 10.0.1.1

If you have misplaced your documentation, and you do not see your router listed here,

search on Google for your router name and “default IP address” to find the correct information.

Another way to locate your router’s IP address: on a PC, open the command prompt (click on Start >

Run/Search for cmd) and enter ipconfig. Look for the Default Gateway line, and try that number.

On a Macintosh, open the Network control panel (System Preferences…, Network) and look for Router: 

This is your router’s IP address.

2. Go to NVR’s System Setup Network Setup

How to switch wireless connection to wired connection

.

.

1. Please connect IP camera to NVR by net cable

2. Checking the Network setup of NVR, remember the network segment of the IP address with NVR

.

.

3.Right click mouse, Enter into VIDEO MANAGE

.

.

4.Click Refresh, search the IP address of camera which connect to NVR

.

.

5.When you find the IP camera on NVR, please click Modify, revise the IP address of camera to the same network segment with NVR

Please noted: The IP address of camera can’t conflict with the IP address of other devices

.

.

.

.

Click Yes to save

.

.

Double click the IP address, the camera will connect to NVR automatically

.

.

6. After setting the IP camera, connect NVR and the IP camera to the same router by net cable, Refresh NVR, search for the IP camera, then add it to NVR, in this way, the IP camera will connect to NVR by wired

.

When 3MP IPC is added to NVR, it prompts “resolution too big”

.

.

When adding a 3MP camera to the NVR, if the “resolution is too large” prompt appears.Please modify the NVR resolution, the detailed operation is as follows:

.

1.Please click “Video Manage”.

.

.

2.Select the camera that appears “Resolution too big”, and then click “Channel Setup”.

.

.

3.In “Channel Setup-Encode setup”, modify the resolution to 1920*1080, and then click “Apply” to save the settings.

.

.

4.Disconnect the power of the camera and restart it, after adding the camera, the camera can be used normally.

.

.

Dual light and AI function setting instructions

Click here to download

.

iSmKit CMS user manual

Click here to download

.

How to upgrade the 8CH NVR to 10 Channel(Only for Version 3.1.8.0M)

.

.

1. Comfirm your system version if is the version 3.1.8.0M first. 

Note: This update file only supports NVR version(3.1.8.0M) to update to 10 channel, if your system version is not 3.1.8.0M, please don’t use this update file to upgrade your system, otherwise it will cause the system not work.

.

Go to “System Admin” – “System Version” to check.

.

2. Download the upgrade file to your computer. Click here to download

.

3. Unzip the upgrade file via rar or zip, then plug the USB flash drive, and move the unzipped update file to the root directory of the USB flash drive. 
Note: 
1)Please move the update file to the root directory of the USB flash drive, do not move the subdirectory.
2)Do not change the file name.

.

4. Connect USB-disk to the NVR.

.

5. Enter the NVR’s menu (System setup\System Admin\System upgrade), Click “Start” to begin upgrading.
Note: Please keep power supply well during the upgrade.

.

6. Once the upgrade is done, NVR will restart system automatically.

.

Effective Troubleshooting for Non-Functional 16-Inch Monitor

Effective Troubleshooting for Non-Functional 16-Inch Monitor

.

.

Youtube Video: https://youtu.be/QVtIkMScO0Q 

.

1. If the indicator lights in the bottom right are OFF, replace the monitor’s 3A power supply.

.

2. If the indicator lights in the bottom right are ON, but the screen is black, check the screen cable.

.

.

.

If the display shows “Power Saving,” there are two possible scenarios:

.

3. For “No Signal → Power Saving”:

When there is no signal, immediately press the “Auto” button. This will bring up the signal source selection menu. Use the “←” or “→” keys to navigate to the first option (“Auto select”), then press the “Menu” button to confirm.

.

4. For “No Cable → Power Saving”:

Please check the two connecting cables in these locations.

.

.

<p>The post EseeCloud Devices Advanced User Guide first appeared on NVR IPCAMERA SECURITY.</p>

The Avigilon AI NVR is a network security appliance that provides all of the functionality of an Avigilon Network Video Recorder with:

System Recommendations

.

Uninterruptible Power Supply

Use an uninterruptible power supply (UPS) system to protect your video surveillance system hardware. A UPS system is used to protect critical equipment from mains supply problems, including spikes, voltage dips, fluctuations and complete power failures using a dedicated battery. It can also be used to power equipment during the time it takes for a standby generator to be started and synchronized.

.

Camera Frame Rate

The AI NVR can provide analytics for non-analytics cameras. For optimal analytics performance, the source camera should stream a minimum of 10 frames per second (fps).

.

.

NOTE

It is acceptable to use frame rates lower than 10 fps for LPR analytics.

.

Web Browser

Basic administration settings for the AI NVR are managed through its Server Management page, which can be accessed from the ACC Client application or a web browser on a network workstation connected to the AI NVR

Supported web browsers for Windows®, Mac or mobile devices include:

.

.

NOTE

Your web browser must be configured to accept cookies or the Server Management page will not function correctly.

It is recommended to use the latest version of any supported web browser.

Networking

When locating where to install the AI NVR in a multi-server deployment, consider the following items:

.

Passwords

The first time you start the AI NVR you must create new administrator passwords for both:

Without these passwords the AI NVR can only be brought back into service by resetting it to its default state as it was when first delivered — all recorded data, updates made to the ACC Server software, and all configuration settings are lost and cannot be restored.

.

Certificate Management

By default, the AI NVR is configured with a self-signed certificate, which generates a connection warning in the web browser. Organizations that deploy their own PKI can use the Certificates pane of the Server Management page to manage certificates on the device. For more information, see Manage Certificates on page 36.

Package Contents

.

Ensure the package contains the following hardware:

.

.

NOTE

North American AI NVR Premium and Premium+ models come with two sets of two power cables. One set is rated NEMA 5-15P / C19 and the other set is rated C19 / C20. Use one of these sets of two power cables to power your AI NVR Premium and Premium+ models. Do not mix and match the cables by using one cable from each set.

AI NVR Premium and Premium+ models in other regions will receive a single set of 2 power cables.

Avigilon AI NVR User Guide

Read Next : Avigilon DVR/NVR Password Reset All Model

Overview of the AI NVR Premium and Premium+ Models

.

.

.

....

.

.

......Figure 1: Front view of AI NVR Premium and Premium+ showing information tag (accessible after removing front bezel)

.

...

.

Figure 2: Front view of AI NVR Premium and Premium+ with bezel removed.

.

.

.

......

.

.

Figure 3: Back view of the AI NVR Premium and Premium+.

.

.

NOTE

North American AI NVR Premium and Premium+ models come with two sets of two power cables. One set is rated NEMA 5-15P / C19 and the other set is rated C19 / C20. Use one of these sets of two power cables to power your AI NVR Premium and Premium+ models. Do not mix and match the cables by using one cable from each set.

AI NVR Premium and Premium+ models in other regions will receive a single set of 2 power cables.

Overview of the AI NVR Standard Models

.

.

.

.

.

Figure 4: Front view of AI NVR Standard showing information tag (accessible after removing front bezel)

.

Figure 5: Front view of AI NVR Standard with bezel removed.

.

.

.

Figure 6: Back view of the AI NVR Standard

Overview of the AI NVR Value Models

.

.

.

Figure 7: Front view of AI NVR Value showing information tag (accessible after removing front bezel).

.

Figure 8: Front view of AI NVR Value with bezel removed.

.

.

.

Figure 9: Back view of the AI NVR Value

NIC Teaming for Network Resiliency

.

To further increase network resilience, it is recommended to use network interface controller (NIC) teaming with the AI NVR network connections. This can be set up using the Server Management page.

.

.

TIP

The AI NVR supports three types of NIC teaming. For more information, see NIC Teaming Modes below.

.

NIC Teaming Modes

The AI NVR supports three types of NIC teaming: Active Backup, Dynamic Link Aggregation (IEEE 802.3ad), and Adaptive Load Balancing.

.

Active Backup

In this mode, one port out of the teamed network ports is designated as the primary port, and the others are set as the backup ports. While the primary network port is functioning properly, the backup ports will not be used. In the event that the primary network port fails, the backup network ports will take over. Both network ports work as unique virtual network interfaces with a single mac address visible to other network devices.

.

Dynamic Link Aggregation (IEEE 802.3ad)

In this mode, all of the teamed network ports will be aggregated into a single connection that has a combined bandwidth equal to the sum of all the teamed port’s individual bandwidth. All teamed network ports will be utilized simultaneously while in this mode and all devices using the teamed ports will operate at the same speed and duplex. If one network port were to fail, then all traffic will be forced through the remaining network ports and your bandwidth will be reduced to the sum of the remaining ports’ bandwidth.

.

.

NOTE

This mode requires a switch that can support IEEE 802.3ad Dynamic Link Aggregation, and will require some setup on that switch.

.

Adaptive Load Balancing

In this mode, both network ports will be used as separate 10 Gb/s or 1 Gb/s connections, but the AI NVR will attempt to dynamically load balance the transmitted and received traffic that passes through each network port. Each network port can be connected to different network switches on the same IP subnet to increase redundancy. In the event that one network port fails, all traffic will be redirected to the working network port.

This mode provides many of the benefits of Dynamic Link Aggregation without the need for any switch configuration or support. Additionally, this mode supports network ports of different speeds (10 Gb/s and 1 Gb/s) to be teamed together.

Setting Up the AI NVR

.

Install the Sliding Rack Rails and Cable Management Arm

If the AI NVR will be mounted in a server rack, install the Sliding Rack Rails and the Cable Management Arm (CMA) provided in the appliance package. Follow the procedures outlined in the Rack Installation Instructions and the CMA Installation Instructions provided in the assembly kits.

.

.

NOTE

When rack-mounting the recorder, ensure no interference occurs from the sliding arms of adjacent equipment in the rack. Every sliding rack rail on the server rack must be aligned before you insert the recorder into the rail for a smooth installation. For more information, refer to the dimensions in your server rack design documentation.

.

Install the Bezel

The bezel can be installed on the front of the recorder to help protect the hard drives against unauthorized access.

.

.

.

Connect the Cables and Power On

Refer to the diagrams in the Overview section for the location of the different connectors. Make the following connections as required:

Download and Install the Latest ACC Client Software

Install the latest version of the ACC Client software (from avigilon.com/support/software) on a workstation connected to the same network on which you are going to connect the new AI NVR.

.

.

NOTE

The first time you access the web site from which you download the software you will be prompted to register. Enter all of the required information and click Complete Registration. Your registration is automatically accepted and you will proceed to the web site.

.

Connect to the AI NVR (using DHCP)

If you use DHCP to assign IP addresses in your network, the new AI NVR is immediately detected after it is connected to the security network. The ACC server software then adds it to the list of sites that is displayed in the System Explorer when you start the ACC Client.

.

.

IMPORTANT

Save the password in a secure format and location either physically or electronically so that it can be retrieved if the password is forgotten.

5.In the Explorer right-click on the AI NVR and select Setup.

6.Click to select the server below the site you right-clicked in the previous step.

7.Click Server Management.

8.Click Trust on the certificate message that opens.

9.You are prompted to log in to the Server Management interface.

You are prompted to create a new password for the administrator user of the AI NVR operating system. Enter and confirm the new administrator password, then click Apply. It is recommended to not use the same credentials as the ACC system administrator.

.

.

IMPORTANT

Save the password in a secure format and location either physically or electronically so that it can be retrieved if the password is forgotten.

The Dashboard panel of Server Management for the AI NVR is displayed.

.

.

NOTE

On subsequent logins, you will need to enter the administrator username and this password when logging in to the AI NVR Server Management interface. The administrator is the only user that can log in to the Server Management interface.

To increase your network resiliency, it is recommended to use network interface controller (NIC) teaming with your network connections. For more information, see NIC Teaming for Network Resiliency on page 16.

.

Connecting to the AI NVR (using Static IP)

You must use this procedure if:

Check that the appliance LED indicators display the correct status. See LED Indicators on page 48 for more information.

.

.

IMPORTANT

By default, the AI NVR is configured with a self-signed certificate, which generates a connection warning in the web browser. Organizations that deploy their own PKI can use the Certificates pane of the Server Management page to manage certificates on the device. For more information, see Manage Certificates on page 36.

.

.

IMPORTANT

Save the password in a secure format and location either physically or electronically so that it can be retrieved if the password is forgotten.

The Dashboard panel of the Server Management page is displayed.

.

.

NOTE

On subsequent logins, you will need to enter the administrator username and this password when logging in to the Server Management interface. The administrator is the only user that can log in to the Server Management interface.

To increase your network resiliency, it is recommended to use network interface controller (NIC) teaming with your network connections. For more information, see NIC Teaming for Network Resiliency on page 16.

Configuring the AI NVR for the First Time

.

.

Change the language for Server Management

Replace the default server name with a user-friendly hostname

Click Device  General  Choose your language from the drop

down Language list

.

Hostname  Change the Hostname

.

Set the time zone  Time  Specify the Time Zone and identify the time source in the NTP drop-down and Servers list.

.

For more information, see Manage Device Settings on page 33.

.

.

.

For more information about the other configuration settings in Server Management, see Using Server Management

on page 30.

If you are installing the first Avigilon appliance in your security network, you can now install the ACC Client software on a network workstation or on the computer you are using to access Server Management. For more information, see Download and Install the Latest ACC Client Software on page 19.

.

Activate the ACC Software and Connect to Avigilon Cloud Services

After you have deployed your AI NVR, activate your ACC software and feature licenses and connect to Avigilon Cloud Services.

.

Activate ACC Software and Feature Licenses

You can activate, deactivate, and reactivate product or feature licenses. Licenses are called Product Keys in the ACC system, and Activation IDs in the licensing portal.

.

.

IMPORTANT

When a new server is added to or removed from a multi-server site, the existing site licenses become inactive and must be reactivated to confirm system changes. See Reactivating a License on page 25.

Printable versions of these guides are available on the Avigilon website: avigilon.com/support/software/. Once your license is activated, you can immediately use the new licensed features.

Connect to Avigilon Cloud Services (Optional)

After activating your ACC software, you can connect your ACC site to the cloud, which may require a subscription, and take advantage of the capabilities and features that provide centralized access across distributed systems.

To connect your site to Avigilon Cloud Services, see help.avigilon.com/cloud.

For information about the cloud services, see avigilon.com/support/cloud/avigilon-cloud-services.

You can start to back up the system settings for your new site in the ACC Client software after it is configured. These settings include the ACC password, and the settings for the camera connections. For more information on backing up the site and server configurations, see the Avigilon ACC Client User Guide.

.

Activating a License

Once your license is activated, you can immediately use the new licensed features.

.

.

TIP

Finish organizing your multi-server site before activating a new license to avoid reactivating the site license each time a new server is added.

Online Activation

If you have internet access, use online activation. However, if your site is large and contains hundreds of licenses, the server may time out. See Offline Activation below instead.

.

1.In the New Task menu  , click Site Setup.

2.Select your new site, then click .

3.Click Add License….

4.Enter your product keys.

If you copy and paste more than one comma-separated product key, the system will format it automatically.

To remove the last product key, click Remove Last Key.

To clear all the product keys, click Clear.

5.Click Activate Now.

6.Click OK.

Offline Activation

Offline licensing involves transferring files between a computer running the ACC Client software and a computer with internet access.

In the ACC Client:

.

1.In the New Task menu  , click Site Setup.

2.Select your new site, then click .

3.Click Add License….

4.Select the Manual tab.

5.Enter your product keys.

If you copy and paste more than one comma-separated product key, the system will format it automatically.

To remove the last product key, click Remove Last Key.

To clear all the product keys, click Clear.

6.Click Save File… and choose where you want to save the .key file. You can rename the file as required.

7.Copy the .key file to a computer with internet access.

In a browser:

In the ACC Client:

.

Reactivating a License

FOR ENTERPRISE EDITION

.

When servers are added to or removed from a site, the site licenses become inactive and must be reactivated to confirm system changes.

If you do not reactivate the affected licenses, the site will stop normal operations.

.

1.In the New Task menu  , click Site Setup.

2.Click the site name, then click .

3.Click Reactivate Licenses…. If you have Internet access:

a.Click Reactivate Licenses.

b.Click OK to confirm your changes.

If you do not have Internet access:

Enabling Analytics on an AI NVR

.

To enable analytics processing on the video streams from cameras connected to the ACC site to be done by the AI NVR:

.

2.In the New Task menu  , click Site Setup.

3.Select a server, then click Server Analytics .

4.Select an analytics feature tab and then select the cameras to enable the feature on:

Classified Object Detection (requires ACC7-VAC licenses)

Appearance Search (requires ACC7-ENT licenses)

Face Mask Detection (requires ACC7-ENT licenses)

Face Recognition (requires ACC7-FACE licenses)

License Plate Recognition (requires ACC7-LPR licenses)

Only cameras that you have access to that have the prerequisite analytics enabled are displayed in each tab. If you do not see a tab, it could be because your site does not have the required analytics license.

5.Click in the option box next to a camera to select or deselect the camera to enable analytics processing by the AI NVR for that camera. An estimate of the resource cost is shown on the left of each camera row.

As you enable (or disable) analytics for cameras, the bars at the bottom update to display the AI NVR’s capacity. The percent usage of each analytics feature is displayed using the color of the analytics feature tab.

To exit the Server Analytics panel, click Close.

.

Setting Up License Plate Recognition

Configuring LPR lanes and settings must be done on the License Plate Recognition page. If the  button doesn’t appear on the Server Setup page, ensure your LPR licenses have been activated. For more information, see Activating a License on page 24.

.

.

.

.

TIP

.

Navigate back to the Server Analytics panel (  ) to view the analytics usage and remaining resource capacity of the AI NVR after setting up LPR lanes. On the Server Analytics panel, you can enable and disable LPR lanes that you have already configured, and check the remaining analytics capacity of the AI NVR.

LPR is now configured and you can add Watch Lists to your site. For more information on configuring the LPR lanes and setting up Watch Lists, see the License Plate Recognition sections in the ACC Client Help Center.

.

LPR Performance Mode

You can increase the channel capacity of LPR analytics on your AI NVR by enabling LPR Performance Mode. This mode will more than double the number of LPR frames per second that can be processed simultaneously, but will limit other analytics on your AI NVR. The following analytics will be disabled when LPR Performance Mode is enabled:

.

.

NOTE

LPR Performance mode requires ACC version 7.14.6 or higher.

To enable LPR Performance Mode:

1.Select the device in the System Explorer and click Server Management.

2.Log in to the AI NVR.

3.Navigate to the Server panel.

4.On the General pane, click the LPR Performance Mode toggle to enable or disable the feature.

Using Server Management

.

Configure the AI NVR with Server Management, accessed from any ACC Client application or compatible browser on a workstation on the same network as the appliance. With Server Management you can configure the server settings.

Start backing up the system settings for the appliance after you configure it. These settings include the ACC password, and the settings for the camera connections. For more information on backing up the site and server configurations, see the Help files provided with the ACC Client software, or the Avigilon ACC Client User Guide available from the Avigilon website.

Throughout this section, the term device is used to identify the recorder.

.

Open Server Management

From any network workstation with network access to the AI NVR, you can open Server Management:

Directly from the ACC Client software:

a.Start the ACC Client software.

b.Log in to the site from the System Explorer.

c.In the New Task menu  , click Site Setup.

d.Select the device in the System Explorer and click Server Management to open the device sign in page.

With a bookmark from a web browser

Use one of these methods to create the bookmark:

.

.

.

.

NOTE

The bookmark may become invalid if the IP address of the appliance changes.

.

.

Log out and stop the Server Management interface by clicking the log out icon on the right of the Server Management title bar.

.

Server Management Dashboard

.

.

ACC Server  Check the operating state of the ACC Server software:

System  View the AI NVR operating state:

.

View system information:

.

Storage  View information about the storage capacity of the device.

When storage is on a RAID array of disks, a single virtual disk and the total storage capacity is listed. Otherwise, each storage disk and its storage capacity is listed.

Click to open the Storage panel.

.

Network  View information about the uplink ports on the device: the link speed and whether the link is active (up) or inactive (down). Click to open the Network panel.

.

Accelerators  View status and location information about each accelerator device, such as a

.

.

Create NIC Teams

The AI NVR supports three types of NIC teaming: Active Backup, Dynamic Link Aggregation (IEEE 802.3ad), and Adaptive Load Balancing. Decide on the teaming mode to use before creating any NIC teams. NIC Teaming Modes on page 16.

.

.

TIP

It is recommended to have teamed network ports in the same subnet.

.

.

TIP

The AI NVR includes the ability to identify which network port on the back panel of your unit is linked to a network port selected in the Server Management page. For more information, see Identifying your Network Ports on page 47.

After a team is created, you can edit the team options on the Teaming tab of the team’s pane, or click Remove Team

to restore the individual network port configuration.

.

Manage Device Settings

On the navigation bar, click Device.

.

Change the language for Server Management.

General  Choose your language from the drop down Language list

.

.

Install the latest version of the  Upgrade  See Upgrade the Firmware on page 38.

.

.

.

.

Change the AI NVR Administrator Password

You can only change the password, not the default administrator username for Server Management.

Remember to save the password in a secure format and location either physically or digitally so that it can be retrieved if the password is forgotten, and discard the record of the previous password.

.

.

CAUTION

You will lose recorded video and configuration data if you forget your password. To reset the administrator password, you must reset the device to the factory default settings. For more information on performing a factory restore, see Restoring Factory Default Settings.

.