This article is for the Arlo Secure experience with Library. If you have the Arlo Secure experience with Feed, visit: How to set up Arlo Cameras – Arlo Secure 4.0

This article applies to Arlo Ultra, Arlo Ultra 2, Arlo Pro 3, Arlo Pro 4, and Arlo Essential Wire-Free series cameras. To connect and install other Arlo devices, visit the links under: Set up other Arlo devices

For the best results use the Arlo Secure App for Arlo camera setup.

An Arlo SmartHub or Base Station is required for Arlo Pro 3, Arlo Ultra, and Arlo Ultra 2 cameras. To check compatibility, visit: Arlo SmartHub and Base Station Compatibility

An Arlo SmartHub or Base Station is optional for Arlo Pro 4 and Arlo Essential wire-free series cameras. For more information, visit: What are the benefits of using an Arlo SmartHub or Base Station?

To set up your camera using a SmartHub or Base Station:

Note: Arlo Ultra, Ultra 2, and Pro 3 must be installed using an Arlo SmartHub or Base Station.

Note: If an Arlo SmartHub or Base Station is not installed, tap Add New SmartHub.

Plug the Ethernet Cable into your SmartHub or Base Station and tap Continue.

Plug the AC adapter into the wall outlet, make sure the lights on the Arlo SmartHub or Base Station turn on, and tap Continue.

If you have trouble connecting the Arlo SmartHub or Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?

Note: Make sure the camera is within 3 to 6 feet of your Arlo SmartHub or Base Station during the setup process. Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.
If the search is taking too long, tap Manually Pair Device. Press the Sync button on the camera and tap Continue.

To set up Arlo Pro 4 or Arlo Essential wire-free cameras directly to your Wi-Fi:

How to set up Arlo Cameras – Arlo Secure 4.0

This article applies to:

VMC5040  VMC4040P  VMC4041P  VMC4050P  VMC4060P  VMC2020  VMC2030  VMC2032

This article is for the Arlo Secure App experience with Feed. If you have the Arlo Secure App experience with Library, visit: How to set up Arlo Cameras

This article applies to Arlo Ultra, Arlo Ultra 2, Arlo Pro 3, Arlo Pro 4, Arlo Pro 5S, and Arlo Essential Wire-Free series cameras. To connect and install other Arlo devices, visit the links under: Set up other Arlo devices

Need Help?

If you need help installing your new Arlo device, you can reach Arlo Support via the Need Help? button in the Arlo Secure App or on my.arlo.com.

Notes:

An Arlo SmartHub or Base Station is required for Arlo Pro 3, Arlo Ultra, and Arlo Ultra 2 cameras.

An Arlo SmartHub or Base Station is optional for Arlo Pro 4, Pro 5S, and Arlo Essential Wire-Free series cameras.

Arlo SecureLink is a technology that uses the sub-GHz wireless communication to communicate between Arlo devices. The Arlo Security Keypad Sensor Hub uses Arlo SecureLink to talk with devices such as the Arlo All-in-One Sensor and the Arlo Pro 5S Camera.

To set up an Arlo camera with an Arlo SmartHub or Base Station:

Note: Arlo Ultra, Arlo Ultra 2, and Arlo Pro 3 must use an Arlo SmartHub or Base Station.

1.Launch the Arlo Secure App.

2.Tap Devices.
Note: Make sure the correct Location where you want to add the camera is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap .

4.Tap Cameras.

5.Tap Ultra, Pro, or Essential.

6.Select your camera.

7.Select an Arlo SmartHub or Arlo Base Station.
Note: If an Arlo SmartHub or Base Station is not installed, tap Add New SmartHub.
Plug the Ethernet Cable into your Arlo SmartHub or Base Station and tap Continue.
Plug the AC adapter into the wall outlet, make sure the LEDs on the Arlo SmartHub or Base Station turn on, and tap Continue.
If you have trouble connecting the SmartHub or Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?

8.Insert the battery into the camera, and tap Continue.
Arlo will begin looking for your camera.
Make sure the camera is within 3 to 6 feet of your Arlo SmartHub or Base Station during the setup process.
Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.
If the search is taking too long, tap Manually Pair Device.
Press the Sync button on the camera and tap Continue.

9.Name your Arlo camera and tap Continue.

10.Position your Arlo camera and tap Continue.

11.Tap Finish.
Note: Your camera will be added to Arm Away mode after installation where Motion Detection, Recording, Variable Length recording is enabled. For more information, visit About Arlo Routines, Modes, Rules, and Automations

To set up Arlo Pro 4, Arlo Pro 5S, or Arlo Essential wire-free camera directly to your Wi-Fi router:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap .

4.Tap Pro or Essential.

5.Select your camera.

6.Select Connect without SmartHub and tap Continue.

7.Check your mobile device settings to ensure you are connected to a 2.4 GHz network.
Note: Arlo Pro 5S cameras work with 2.4 GHz and 5 GHz frequency bands after installation is complete on 2.4 GHz. For more information, visit: How does the Arlo Pro 5S Camera use 5GHz Wi-Fi networks?

8.Return to the Arlo Secure App and tap Continue.

9.Enter your Wi-Fi SSID (Network Name) and Password.

10.Tap Continue.

11.For Arlo Essential wire-free cameras:
Press and hold the Sync button on the bottom of the camera for two seconds.

12.For Arlo Pro 4 and Arlo Pro 5S:
Insert the battery into the camera and tap Continue.
When the LED on the front of the camera is blinking blue, tap Continue.
If the LED is not blinking blue, tap LED is not blinking blue.
Press and hold the Sync button on the inside of the camera and tap Continue.
When the LED begins blinking blue, tap Continue.

13.Hold the QR code about four to six inches in front of your Arlo camera.

14.When you hear a chime, tap Continue.
Note: If you are having trouble, visit: My Arlo camera will not scan the QR code during setup

15.Arlo will begin looking for your camera.
Make sure the camera is within 3 to 6 feet of your Wi-Fi router during the setup process.
Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.

16.Name your Arlo camera and tap Continue.

17.Position your Arlo camera and tap Continue.

18.Tap Finish.
Note: Your camera will be added to Arm Away mode after installation where Motion Detection, Recording, Variable Length recording is enabled. For more information, visit About Arlo Routines, Modes, Rules, and Automations

To set up other Arlo devices, visit:

For more information, visit:

To troubleshoot setup issues, visit:

How to set up the Arlo Pro and Pro 2 Camera – Arlo Secure 4.0

This article applies to:

VMC4030P  VMC4030

This article is for the Arlo Secure App with Feed. If you have the Arlo Secure App with Library, visit: How to set up the Arlo Pro and Pro 2 Camera

The following instructions apply to setting up the Arlo Pro or Arlo Pro 2 camera. To setup other Arlo camera models, visit: How to set up Arlo Cameras – Arlo Secure 4.0

To complete the Arlo Pro or Arlo Pro 2 setup process, you will need an Arlo SmartHub or Base Station. Install the Arlo SmartHub or Base Station first before installing your cameras. For more information, visit: How do I connect my Arlo SmartHub or Base Station to the Internet? – Arlo Secure 4.0

If you are setting up multiple cameras, only sync one camera at a time.

To set up an Arlo Pro or Pro 2 Camera:

1.Launch the Arlo Secure App.

2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap .

4.Tap Cameras.

5.Tap Pro.

6.Tap Pro 2 or Pro.

7.Select an Arlo SmartHub or Arlo Base Station. If only one Arlo SmartHub or Base Station is installed, tap Continue when Arlo has detected the device.
Note: If an Arlo SmartHub or Base Station is not installed, tap Add New SmartHub.
Plug the Ethernet Cable into your Arlo SmartHub or Base Station and tap Continue.
Plug the AC adapter into the wall outlet, make sure the LEDs on the Arlo SmartHub or Base Station illuminate, and tap Continue.
If you have trouble connecting the Arlo SmartHub or Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?

8.Insert the battery into the camera, and tap Continue.
Unlock the battery compartment by pressing the latch button and pulling back gently.
Insert the battery as shown and close the battery door.

9.Press the Sync button on the camera for about two seconds and then release the button.

10.When the LED on the camera is blinking Blue, tap Continue.

11.Arlo will begin looking for your camera.
Note: Make sure the camera is within 3 to 6 feet of your Arlo SmartHub or Base Station during the setup process. Avoid placing the camera within close proximity to other Wi-Fi devices to avoid signal interference during the setup process.
If the search is taking too long, tap Manually Pair Device. Press the Sync button on the camera and tap Continue.

12.Name your Arlo camera and tap Continue.

13.Position your Arlo camera and tap Continue.

14.Tap Finish.
Note: Your camera will be added to the  Arm Away mode after installation. Motion Detection, Recording, Variable Length recording are enabled. For more information, visit: About Arlo Routines, Modes, Rules, and Automations

How to set up the Arlo Wire-Free Camera – Arlo Secure 4.0

This article applies to:

VMC3030

This article is for the Arlo Secure App with Feed. If you have the Arlo Secure App with Library, visit: How to set up the Arlo Wire-Free Camera

The following instructions apply to setting up the original Arlo Wire-Free Camera (VMC3030). To setup other Arlo camera models, visit: How to set up Arlo Cameras – Arlo Secure 4.0

To set up the Arlo Wire-Free Camera:

1.Launch the Arlo Secure App.

2.Tap Devices.

3.Tap .

4.Tap Cameras.

5.Tap Others.

6.Tap Arlo.

7.Select an Arlo SmartHub or Arlo Base Station or tap Continue if only one Arlo SmartHub or Arlo Base Station is installed.
Note: If an Arlo SmartHub or Arlo Base Station is not installed, tap Add New Base Station.
Plug the Ethernet Cable into your Arlo SmartHub or Arlo Base Station and tap Continue.
Plug the AC adapter into the wall outlet, make sure the LEDs on the Arlo SmartHub or Arlo Base Station illuminate, and tap Continue.
If you have trouble connecting the Arlo SmartHub or Arlo Base Station, visit: Arlo can’t discover my SmartHub or Base Station during installation; what do I do?

8.Insert the batteries into the camera:

Unlock the battery compartment by sliding and holding the latch.

Insert the batteries as shown and close the battery door.

How to set up the Arlo Essential Indoor Camera – Arlo Secure 4.0

This article applies to:

VMC2040

This article is for the Arlo Secure App with Feed. If you have the Arlo Secure App with Library, visit: How to set up the Arlo Essential Indoor Camera

For best results, use the Arlo Secure App for Arlo Essential Indoor Camera setup.

An Arlo SmartHub or Base Station is optional.

Need Help?

If you need help installing your new Arlo device, you can reach Arlo Support via the Need Help? button in the Arlo Secure App or on my.arlo.com.

To set up the Arlo Essential Indoor Camera directly to your Wi-Fi router:

1.Launch the Arlo Secure App.

2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap .

4.Tap Cameras.

5.Tap Essential.

6.Tap Essential Indoor Camera.

7.Review the Meet your Arlo Essential Indoor Camera screen and tap Continue.

8.Find a location to place the camera that is near an outlet and within range of your Wi-Fi network.

9.Tap Continue.

10.Select Connect without SmartHub and tap Continue.

11.Check your mobile device settings to ensure you are connected to a 2.4 GHz network.

12.Return to the Arlo Secure App and tap Continue.

13.Enter your Wi-Fi SSID (network name) and Password.

14.Tap Continue.

15.Use the provided cable and power adapter to connect to an outlet, then plug the micro-USB portion of the cable into your camera.

16.Once the Privacy Shield on the camera opens, tap Continue.

17.Press the Sync button on the camera.

18.When the LED on the front of the camera is flashing blue, tap Continue.

19.Hold the QR code about four to six inches in front of your Arlo camera.
When you hear a chime, tap Continue.
If you are having trouble, visit: My Arlo camera will not scan the QR code during setup

20.Arlo will begin looking for your camera.
After the camera is found, name your Arlo camera and tap Continue.

21.Position your Arlo camera and tap Continue.

To set up the Arlo Essential Indoor Camera with an Arlo SmartHub or Base Station:

1.Launch the Arlo Secure App.

2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap .

4.Tap Cameras.

5.Tap Essential.

6.Tap Essential Indoor Camera.

7.Review the Meet your Arlo Essential Indoor Camera screen and tap Continue.

8.Find a location to place the camera that is near an outlet and within range of your Wi-Fi network.

9.Tap Continue.

10.Tap Continue to add your device to the Arlo SmartHub or Base Station.

11.Use the provided cable and power adapter to connect to an outlet, then plug the micro-USB portion of the cable into your camera.

12.Once the Privacy Shield on the camera opens, tap Continue.

13.Press the Sync button on the camera.

14.When the LED on the front of the camera is flashing blue, tap Continue.

15.Follow the in-app instructions to complete the setup.

How do I set up my Arlo Go 2 Camera? – Arlo Secure 4.0

This article applies to:

VML2030

This article is for the  Arlo Secure App experience with Feed. If you have the Arlo Secure App experience with Library, visit: How do I set up my Arlo Go 2 Camera?

Arlo Go 2 gives you the flexibility of using 2.4 GHz Wi-Fi or LTE for connectivity. You can also use LTE as a backup in case your Wi-Fi internet connection is interrupted.

Note: When using both 2.4 GHz Wi-Fi and LTE mode, Wi-Fi will always be the primary mode of connection.

Arlo Go 2 works with the same Arlo Secure App as all other Arlo cameras and devices. However, to connect your Go 2 camera to the mobile network, an activated SIM card with a mobile data plan must be inserted into the camera.

Note: We recommend that you charge the battery before mounting your camera. Your camera LED indicator light will blink amber if your battery needs charging. The indoor charging cable that came with your camera works with most power adapters.

Need Help?

If you need help installing your new Arlo device, you can reach Arlo Support via the Need Help? button in the Arlo Secure App or on my.arlo.com.

To set up your Arlo Go 2 camera using LTE only:

1.Launch the Arlo Secure App.

2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap .

4.Tap Cameras.

5.Tap Go 2.

6.Tap Continue.

7.Follow the instructions for installing your SIM card as shown on the Arlo Secure App and tap Continue.
For more information, visit: How do I install a SIM card in my Arlo Go 2 Camera?
The LED in front of your camera should blink blue. If the LED is not blinking blue, press the Sync button on the inside of your camera.

8.Tap Continue.

9.Hold the QR code in the Arlo Secure App, 4 to 6 inches in front of your camera.
You should hear a chime from your Arlo device. If you didn’t hear a chime, visit: My Arlo camera will not scan the QR code during setup

10.Tap Continue.

11.Name your Arlo camera and tap Continue.

12.Position your Arlo camera and tap Continue.

13.Tap Finish.

To set up your Arlo Go 2 camera with Wi-Fi:

Note: Before setting up your Arlo Go 2, make sure that your mobile device is connected to a Wi-Fi network. For more information, visit: How do I connect my mobile device to a 2.4 GHz Wi-Fi network to set up my Arlo camera?

1.Launch the Arlo Secure App.

2.Tap Devices.
Note: Make sure the correct Location where you want to add the device is selected. For more information, visit: How do I switch my Location in the Arlo Secure App?

3.Tap .

4.Tap Cameras.

5.Tap Go 2.

6.Tap Set Up with Wi-Fi.

7.Follow the instructions for installing your SIM card as shown in the Arlo Secure App and tap Continue.
Note: You may skip this step if you are not using a SIM card.
The LED in front of your camera should blink blue. If the LED is not blinking blue, press the Sync button on the inside of your camera.

8.Tap Continue.

9.Verify your mobile device is connected to a 2.4 GHz Wi-Fi network and tap Continue.

10.Enter your Wi-Fi credentials, then tap Continue.

11.Hold the QR code in the Arlo Secure App, 4 to 6 inches in front of your camera.
You should hear a chime from your Arlo device. If you didn’t hear a chime, visit: My Arlo camera will not scan the QR code during setup

12.Tap Continue.

13.Name your Arlo camera and tap Continue.

14.Position your Arlo camera and tap Continue.

15.Tap Finish.

If the Arlo Go 2 camera is installed too far from your Wi-Fi router, it may cause the battery to drain quicker. For more information, visit: How do I control whether my Go 2 Camera connects to Mobile or Wi-Fi?

<p>The post How to set up Arlo Cameras first appeared on NVR IPCAMERA SECURITY.</p>

Before you can connect a Smart Garage Camera to your home network, you will need:

The LED on the Smart Garage Camera must be blinking blue. If the LED is not blinking blue or is flashing blue/green, unplug the power supply and reconnect the power supply.

The myQ app supports the use of more than one myQ Smart Garage Camera. You will have to follow the myQ app set-up steps for each camera you want to add. When setting up more than one camera, it is recommended to pick a distinguishing name for each camera so you can easily find and select the camera you want to view in the app.

How to set up the Smart Garage Camera

Note: During the setup process, monitor the status of the LED on your myQ Smart Garage Camera for any changes. If you are still unable to connect, use the last LED status observed during the in-app setup to troubleshoot further and see Unable to Connect the myQ Smart Garage Camera to Wi-Fi Overview.

myQ Camera Frequently Asked Questions

The following FAQs answer many of the general questions about myQ Cameras. The FAQs also include links to articles where you may find more information.

How do I connect my camera to my home Wi-Fi network?

How do I enable Motion Recording in the myQ app?

Motion Events will only be recorded when Motion Recording is enabled in the Camera Settings of the myQ app.

See Enable Motion Recording in the myQ App for more help.

How do I Live Stream in the myQ app?

Live Stream gives you the ability to view your camera feed live.

See How to Live Stream in the myQ App for more information.

How do I adjust the camera volume in the myQ app?

The camera volume in the myQ app is controlled by the built-in volume controls on your mobile device.

See How to Adjust the Camera Volume in the myQ App for more information.

How do I use the Push to Talk camera feature in the myQ app?

Push To Talk gives you the ability to listen and speak through the camera.

See How to Use the Push To Talk Camera Feature in the myQ App to get help with setting up this feature.

Can I use more than one type of myQ Smart Camera?

The myQ app supports the use of more than one myQ Smart Camera. You will need to follow the myQ app set-up steps for each camera you want to add. When setting up more than one camera, it is recommended to pick a distinguishing name for each camera so you can easily find and select the camera you want to view in the app. We would recommend signing up for the 30 day multi-device plan if connecting multiple cameras.

How high should I mount my camera?

Smart Garage Camera/Indoor Camera – Within 10’ of an existing outlet (comes with 10’ power cord)

Smart Outdoor Camera – 7-10’ recommended height (comes with 25’ power cord)

Is my camera able to withstand extreme temperatures?

Smart Indoor Camera – Rated for indoor use

Smart Garage Camera – Rated for extreme garage temperatures from -4° to 122° F (-20°C to 50°)

Smart Outdoor Camera – Rated for temperatures ranging from -4° to 122° F (-20°C to 50°)

Video Keypad – Rated for temperatures ranging from -4° to 122° F (-20°C to 50°)

Is my camera weatherproof?

Smart Indoor Camera – Rated for indoor use and not designed to withstand weather elements.

Smart Garage Camera – Rated for extreme garage temperatures from -4° to 122° F (-20°C to 50°) but not designed to withstand weather elements.

Smart Outdoor Camera – Rated for temperatures ranging from -4° to 122° F (-20°C to 50°). Power cable and adapter fitted with extra gasket seals to prevent water damage. IP 65 rated Water Resistant.

Video Keypad – Rated for temperatures ranging from -4° to 122° F (-20°C to 50°) and is IP 55 rated Water Resistant.

How do I reset my camera?

See How to reset a myQ device for more help.

I see an error and was unable to name my camera. Do I need to start over?

Before starting over, check the LED status on the Camera. If solid green, force close the myQ app and relaunch to confirm if the device is showing. You can update the name by tapping the gear icon in the video window.

If the light is not solid green, start over or see How to reset a myQ device for more help.

How can I adjust the camera position?

Smart Indoor Camera – Adjust camera head swivel.

Smart Garage Camera – Adjust camera head swivel. Older SGC1 models will also have a swivel camera arm.

Smart Outdoor Camera – Loosen collar at base and adjust camera arm. Adjust camera head swivel.

Video Keypad –

My Outdoor Camera is not recognizing movement. How can I fix that?

Ensure the camera is mounted at the appropriate height of 7’-10’. Installation higher than the recommended height may not allow for proper movement and person detection. Adjust the angle of your camera so the lens is not receiving direct sunlight or other light sources.

Recommended Router Settings for myQ Cameras

When setting up a LiftMaster camera, there may be a few Wi-Fi settings that need to be changed in order to successfully connect the device. Some settings may need to be given to your internet service provider (ISP) to have them configured for your site or home see When to Contact Your Internet Service Provider (ISP)

Recommended Router Settings

Note: If attempting to change any router settings yourself, be sure to back up your router’s current settings before any changes are made and have the router’s manual available.

myQ cameras require these ports in order to communicate to our server

Verify that ports are not being blocked by your router or a firewall product

Note: User-modified routers using open-source firmware (such as DD-WRT, OpenWRT, etc.) have not been tested with myQ products. While some of these open-source versions may work with myQ products, compatibility is unknown.

Unable to Connect the myQ Smart Garage Camera to Wi-Fi Overview

myQ Smart Garage Cameras require a Wi-fi internet connection to access the myQ server. If the myQ Smart Garage Camera is not connecting to the server, the issue could be due to the router, mobile device connection, or Internet connection.

When attempting to connect, the camera’s LED indicator lights will go through a sequence of flashes before finally turning solid green to confirm the connection. Each step of the sequence indicates what the camera is attempting to do and how you approach troubleshooting depends on the LED light’s behavior and color.

Before You Begin

Make sure to check the status of the LED on the myQ Smart Garage Camera and use the list below to determine a resolution.

Note: Chamberlain Group Technical Support does not troubleshoot routers. If additional assistance is needed to access a home router, please contact your internet service provider.

LED Light	Connection Status	Troubleshooting Resource(s)
No LED	The camera does not have power	Unable to Connect the myQ Smart Garage Camera to My Home Wi-Fi Network and No LED
Solid White	Camera is powering up	Unable to Connect the myQ Smart Garage Camera to My Home Wi-Fi Network and LED Is Solid White
Flashing Blue	Unable to connect to your home Wi-Fi network	Unable to Connect the myQ Smart Garage Camera to My Home Wi-Fi Network and LED Is Flashing Blue
Solid Blue	Unable to connect to your mobile device	Unable to Connect the myQ Smart Garage Camera to My Home Wi-Fi Network and LED Is Solid Blue
Flashing Blue and Green	Unable to connect to your home Wi-Fi router	Unable to Connect the myQ Smart Garage Camera to My Home Wi-Fi Network and LED Is Flashing Blue and Green
Flashing Green	Unable to connect to myQ internet server	Unable to Connect the myQ Smart Garage Camera to My Home Wi-Fi Network and LED Is Flashing Green
Solid Green	Connected to myQ server, but device not added to myQ account	Unable to Connect the myQ Smart Garage Camera to My Home Wi-Fi Network and LED is Solid Green
Flashing Purple	Camera is updating firmware	Unable to Connect the myQ Smart Garage Camera to my Home Wi-Fi Network and LED is Flashing Purple
Flashing Red	Camera is overheating, going into protection mode	Unable to Connect the myQ Smart Garage Camera to my Home Wi-Fi Network and LED is Flashing Red

How to forget a myQ Camera in Bluetooth Settings

When you experience an issue with your Smart Garage Camera or garage door opener’s integrated camera being connected via Bluetooth, but the camera is not connecting to Wi-Fi, these steps will walk you through “forgetting” the myQ Camera in Bluetooth on your phone.

How to forget a myQ Camera in Bluetooth Settings

Apple:

1.On your phone, tap Settings

2.Tap Bluetooth

3.Find the Camera in the list

• Smart Garage Cameras will start with SGC

• Integrated Cameras start with GDO

• 

1.Tap the blue “i” icon () to the right of the Camera

2.Select Forget this Device

Android:

1.On your phone, tap Settings

2.Tap Connections

3.Tap Bluetooth

4.Find the Camera in the list

• Smart Garage Cameras will start with SGC

• Integrated Cameras start with GDO

• 

<p>The post myQ Smart Garage Camera Setup Guide first appeared on NVR IPCAMERA SECURITY.</p>

Security Systems Basic Operation Guide

1. Arming the System:

   • Away Mode: Protects all sensors (doors, windows, and motion). Use when leaving the premises.
   • Stay Mode: Protects perimeter sensors (doors and windows) but not motion sensors. Use when staying inside.
   • Enter your code on the keypad and select the desired arming mode.

2. Disarming the System:

   • Enter your code on the keypad within the designated time frame (usually 30 seconds) to avoid triggering a false alarm.

3. Responding to an Alarm:

   • If you accidentally trigger the alarm, immediately enter your code to disarm the system.
   • If you suspect an actual intrusion, evacuate the premises and contact the authorities.
   • If you have a monitoring service, they will contact you to verify the alarm and dispatch help if needed.

Additional Features

Many modern systems offer advanced features like:

• Remote Control: Arm and disarm your system from your smartphone or computer.
• Home Automation: Integrate your security system with other smart home devices like lights, locks, and thermostats.
• Video Surveillance: Monitor your property with security cameras and receive alerts on your mobile device.

Important Tips

• Read the User Manual: Familiarize yourself with the specific features and operation of your system.
• Test Your System Regularly: Ensure all sensors and alarms are functioning properly.
• Change Your Code Periodically: Prevent unauthorized access to your system.
• Keep Emergency Contacts Updated: Provide your monitoring service (if applicable) with current contact information.

Remember: This is a general guide. Specific operation may vary depending on your system’s make and model. Always refer to your user manual for detailed instructions.

How App Sensitivity Translates to Recorder Levels

When setting up your security system, adjusting the motion sensitivity plays a crucial role in ensuring the system works as intended. Whether you want to reduce false alarms caused by pets or capture even the slightest movement, the sensitivity setting is a powerful tool. However, it’s important to understand how the app settings correspond to the recorder’s settings to avoid any confusion.

This guide will walk you through how sensitivity levels in your app map to the actual settings in the recorder and explain an important quirk: changes in the recorder’s settings don’t sync back to the app.

App Sensitivity Compare with Recorder Sensitivity

In the app, you’ll find sensitivity options in percentages. Each percentage corresponds to a sensitivity level in the recorder:

Unfortunately, the highest sensitivity level in the recorder (Level 8) isn’t accessible when adjusting through the app.

DID YOU KNOW? Changes made through the app immediately update the recorder’s settings. However, changes made directly in some recorders do not reflect in the app. This means if you adjust the sensitivity level in the recorder, the app will still display the last sensitivity setting it sent, which may not be accurate anymore.
It is recommended to always use the app to ensure the displayed sensitivity matches the actual setting. Change the sensitivity via Modes which you can learn more here.

Tips for Choosing the Right Sensitivity Level

Conclusion

Understanding how your app’s sensitivity settings translate to your recorder ensures you can fine-tune your system for optimal performance. Remember that while the app can control sensitivity conveniently, changes made directly in the recorder don’t sync back to the app. This small quirk can create confusion, but with the insights provided here, you’ll always know how to keep your settings aligned.

How to Disable the Watermark on Your Recorder

By default, the Swann logo is overlaid as a watermark for each camera.

NOTE: Once disabled, future recordings will not have the watermark.

How to digitally zoom in or out on a Recorder?

This works on both Live View or Playback from the unit itself.

Option 1:

If you are viewing multiple cameras in a single view, view one channel in full screen (double-click), then use the mouse to:

Option 2:

1.To enter Zoom mode, left-click a camera in Live View mode then click the “Zoom” button on the Camera Toolbar.

2.To zoom, move the mouse to the area or object that you want to zoom to then use the scroll wheel on the mouse to zoom in or out.

3.When zoomed in, click and hold the rectangle (as shown bottom right of the screen) to scroll around the image.

4.Right-click to exit.

To return to multiple camera view, double-click the mouse from the screen above.

Frequently asked questions about digital zoom

Can I zoom out further than the camera’s normal view?

How to change the small or lower-case letters on the on-screen keyboard display to upper-case letters

How to change the small or lower-case letters on the D1 on-screen keyboard display to upper-case letters.

Using the mouse, click the “ab” letters on the right side of the text box and it will change mode from lower-case letters to upper-case letters.

How to Change the Resolution of the Recorder

How to change the position of the Date and Time display bar on my DVR

You can adjust the position of the OSD from the menu display of the DVR. It has to be done directly from the DVR, using the monitor that is connected either to its VGA or HDMI output.

You simply open the menu of the DVR, go in the menu display, and then, from the camera tab, click on SET next to the OSD Display Position.

Afterward, with the mouse connected to the DVR, left click on the date and time display , hold down the button and drag the display wherever you wish .

The position chosen for the Date and Time Display will be reflected on the live view on your computer screen, should you access the DVR through the Network Interface ( and also on the recorded videos if you have enabled record date from the Display menu of the DVR ).

How to Change the Camera Layout on Your Recorder’s Live View

This guide is to show you how to do the following for the models above:

NOTE: The layout and arrangement will revert to a default state upon reboot.
If you want a fixed order of channels (e.g., Front door on ch1, Backyard on ch2, and so on), you need to change the input port or in the settings.

Change the number of cameras showing in Live View

1.Right-click or move the mouse cursor to the bottom of the screen to see the Menu Bar.

2.Choose from one of the following for your preferred view:

Icon	Description
	If you have 2 to 4 cameras, choose to display as 4-camera view.
	If you have 7 to 8 cameras, choose to display as 8-camera view. The 9th box will display the Swann logo only. This box cannot be customized nor disabled.
	Click this to select from one of the multi-screen viewing modes available. For an 8-channel recorder, it will show 6-camera view and 8-camera view.
	Click this to repeatedly cycle through each video channel full-screen. Each video channel will be displayed for five seconds.

Change the layout of the cameras in Live View

1.Left-click a camera (e.g. Channel 1) & drag it to reposition it.

2.Drop (release the left-click button after holding) over a different area or the desired box.

3.Repeat for other cameras.

For example in the image below, Channel 1 was moved to 2nd position while Channel 2 was moved to 1st position.

How to block trees or unwanted movement from recording in my DVR / NVR or triggering too many notifications

NOTE: This article also applies if you receive too many notifications on the app triggered by non-human objects.

PIR sensors can detect heat (infrared radiation) from objects within and even outside the camera’s field of view. Paired with moving objects captured by the camera like trees, swaying objects in sunlight, or cars passing, it can trigger the camera to record.

In this article, you will learn what settings on your recorder you can configure to virtually eliminate false triggers.

Remove The ‘Red Boxes’ From Constantly Moving Objects

The ‘red boxes’ shown above are the areas where the camera can detect movement. If trees are constantly moving or your camera is facing the road, you might want to remove these boxes so it doesn’t trigger on those areas. Here’s how you can remove it:

Any movement on the red areas or boxes will be picked up.

Set up Analytics

DID YOU KNOW? Only selected units or kits have the capable hardware to have Analytics, and each has its own set of Analytics available. The units are:

In a nutshell, Analytics provides you with much greater control over how your system detects motion. Below is a YouTube playlist that explains how a specific type of Analytics work.

You can also check your recorder’s manual for more details.

Relocate Or Reposition The Camera

The ideal position of the camera is 7-8 feet high, pointing downwards at an angle to cover the area where people will be walking across the camera’s path, and pointing the lens away from direct sunlight.

Visit the following links for more information about what heat sources outside of the camera’s field of view that can trigger the camera’s PIR sensors for recording and notifications:

NOTE: This should be a last resort only if lowering sensitivity, configuring area setup, nor analytics are not feasible options.

Does The Camera Still Record Events If Internet is Down or Offline

Answer: Yes

It will save the recordings to its internal memory or micro SD card when the camera gets triggered. Once the internet is back, it will attempt to upload the event clips during the downtime.

NOTE: SWIFI-TRACKCM only records to its micro SD card, regardless of whether it is online or offline.

How long will the SWIFI camera record?

Shortest:10 seconds

Longest:60 seconds (1 minute)

If the trigger (sound or movement; depending on what triggered the camera to record) is continuous for more than 60 seconds, another clip will be made.

For example, there was a continuous movement across the field of view of the camera within the PIR range for 135 seconds, about 3 clips will be recorded:

NOTE: If your camera isn’t recording as much as you’d expect, increase the Sensitivity setting. You can find this option under Detection Settings in your camera’s settings.

How do I optimize the motion detection?

Answer: PIR sensors work optimally when the subject of detection passes across their front. The more the object must “cross” the front of the video doorbell the better the detection reliability. When placing your video doorbell try to avoid situations where the subject would move straight toward the video doorbell if possible. You may need to experiment with the sensitivity settings in the app and video doorbell placement to get the ideal mix of detection and battery life as too much sensitivity can reduce battery life.

How can I play H.265 files on my PC?

When exporting videos from your NVR, you are given the option to export the player as well, which will then transfer a copy of the player onto your USB thumb drive.

This player allows users to view H.265 files on their PC and supports digital zoom and multi-channel playback from different channel files as well.

Click here to download the file.

How to Factory Reset a Stand-alone camera

Factory Reset is a complete reset of your device to its original factory settings. Also known as a hard reset. Factory resetting your camera can help resolve technical problems. It will perform the following, except unpair the camera (if currently paired) from the Swann Security account where it is currently paired:

NOTE: If you want to transfer the camera to another account, it needs to be unpaired by following this article: How to Unpair my Device from my Swann Security Account then pair it to the other Swann Security account by following this article: How to Pair Your Stand-alone Camera Using the Swann Security App

How to factory reset via physical button

Type the model number of your camera below to learn how to Factory Reset your camera.

Once donce, you have to do the pairing process again. Follow this article: How to Pair Your Stand-alone Camera Using the Swann Security App

Conclusion

A factory reset is a simple way to fix camera issues and start fresh. Just remember to back up any important data before resetting, if still possible.

How To Optimize Motion Detection

Answer: PIR sensors work optimally when the camera is mounted around looking down somewhat and the subject of detection passes across their front. The more the subject “crosses” the front of the camera the better the detection reliability.

When placing your camera, try to avoid situations where the subject would move straight toward the camera if possible. You may need to experiment with the sensitivity settings in the app and camera placement to get the ideal setting.

How to Set the Correct Date and Time on a Recorder?

SYSTEM > GENERAL > Date Format

How to Set the Date and Time on a Recorder

What to do if date and time are not updating automatically

If your DVR does not have internet connection, we recommend that you set up the following manually:

What time zone to set if you are unable to find your city

Time zone is based on GMT or UTC. Options range from -12:00 to +12:00.

Here are the conversions for common regions if you are unable to find your city in the dropdown:

If you are not in the regions above, use Google to convert your location’s time zone in GMT or UTC format. E.g. Pacific Standard Time in UTC is -8:00.

What to do if time is 1 hour ahead or behind: enable DST

Daylight Savings Time is applicable to the following regions where the clocks offset automatically by 1 hour.

How to Turn Off, Turn On, or Reboot Stand-Alone Cameras

Stand-alone cameras are an ideal security solution for homes and businesses, offering flexibility and convenience without needing a recorder to save clips. These cameras typically run on different power sources, such as built-in rechargeable batteries, power adapters, or direct AC connections. Whether you’re addressing a technical issue, performing routine maintenance, or learning to operate your device, knowing how to turn the camera off, on, or reboot it is essential.

How to…

Type the model number of your camera below to learn how to Factory Reset your camera.

Conclusion

Taking control of your stand-alone camera’s power and reboot functions is simple and helps maintain its reliability over time. Whether your device is powered by a rechargeable battery, a power adapter, or connected directly to AC, following the proper steps ensures smooth operation. By familiarizing yourself with these basic processes, you’ll keep your security system functioning efficiently and enjoy the peace of mind that comes with a dependable setup. Security is about control, and understanding these essentials puts you in charge.

<p>The post Security Systems Basic Operation Guide first appeared on NVR IPCAMERA SECURITY.</p>

The interface of iCam365 app for Android and iPhone is slightly different, I will post separate guides for Android and iPhone so that you can follow our guide to connect and use iCam365 cameras exactly.

iCam365 camera Complete Guide

Connect iCam365 camera

Download iCam365 app

Use the “Scan” function on the mobile phone to scan the QR code to download and install the iCam365 APP.

Login iCam365 app

You need to register iCam365 account and login to use iCam365 camera.

Connect power supply

Connect the device to the power supply.
Keep it connected for about 1 minute until hearing a prompt sound.

Add iCam365 camera

There are 3 ways to connect iCam365 camera, we recommend to use ‘Scan code to add a device’ to connect camera.

Click the + icon, then scan the QR code on the iCam365 camera, the QR code is usually on the bottom or back of the camera. iCam365 APP will show the recommended way to add.

Please let the camera close to the router, and then connect the camera.

Select Connection Mode

If the QR code on the iCam365 camera is missing or not recognized, you can manually select the add method to connect the camera.

1. Click Add by type in the top right corner, select Surveillance camera, select WiFi camera.

2. Then you can choose Quickly add, Scan code to add a device and Add a device by wired network.

Quickly add – Android

Add a camera via the AP hotspot connected to the iCam365 camera.

When the ‘Camera startup is complete, waiting for network to be added‘ voice, you can start to connect iCam365 camera, if there is no voice, please reset iCam365 camera.

1. Select Quickly add, click Next > I know

2. Click CHOOSE, click the icon to select your wifi and enter your wifi password, then click NEXT.

Can’t search iCam365 camera?

Please connect iCam365 hotspot wifi manually, wifi name: AICAM_xxxxxxxxxxx.

Can’t find iCam365 hotspot wifi?
Please reset iCam365 camera.

3. After you click JOIN, your phone will automatically connect to iCam365 camera’s hotspot wifi, then wait for iCam365 camera to connect to your wifi.

After successful connection, set the camera name and you can start using iCam365 camera.

Scan code to add

Scan QR code on your mobile phone to add a iCam365 camera to pair WiFi.

When the ‘Camera startup is complete, waiting for network to be added‘ voice, you can start to connect iCam365 camera, if there is no voice, please reset iCam365 camera.

1. Select Scan code to add a device, click Next, select your wifi and enter your wifi password and click Next.

2. Let iCam365 camera scan the QR code displayed by APP, Distance 10-30 cm (3 – 11in).

3. When the iCam365 camera emits the ‘Scan QR code successfully‘ voice, click NEXT and wait for the camera to connect to wifi.

After successful connection, set the camera name and you can start using iCam365 camera.

iCam365 camera can’t scan QR code?
Please check the Common Problem

Share Camera

You can share iCam365 camera to your family or friends.

Share the account to enjoy the permission to watch the live broadcast, intercom permission, control the rotation of the PTZ. and view video replay privileges

1.Click Share > Add new sharing, then enter your family or friend’s email or cell phone number.

2.After sharing, a sharing message will be sent to the email or number you entered, register and login to iCam365 APP and you can start using the camera.

In the sharing screen, you can click the icon on the right to delete the shared users.

Setup Recording

Before setting up the recording, you need to insert the memory card to make the recording function available.

1. Insert the memory card into the iCam365 camera, then enter the Memory card interface to see if the camera reads the memory card.

Note: When replacing or removing the card, please cut off the power first to avoid card damage and data loss.

2. Click Video recording settinas, you can set the recording mode and definition here.

· All-day video recording : Uninterrupted continuous video recording

· Event video recording : Record a video when an event is detected

· Turn off : The device will stop recording a video after turn-off

Video Definition: The higher the storage resolution, the clearer the recorded video will be, while the more storage capacity taken up and the less the total recording time. Please choose the storage resolution according to your own situation.

.

See also  iCam365 Camera (Buyer’s Guide)

.

View Video

Click the video icon to view the video, the time with color means there is recording at the current time.

Setup Detection

1. Click Detection settings and select the detection sensitivity. You can also set the Detection area.

Detection area: Increase or decrease the area by clicking on the screen,The red area is the monitoring alarm area, and the full screen will be detected after reset:

2. Click Notification settings, open Turn on notification and Motion detected to detect and receive alarm notifications.

In order to receive the alarm notification in time, it is recommended to set the Notification interval to 1 minute.

Warning voice

Turn on the Warning voice message, when the iCam365 camera detects an intruder, the camera will send a warning voice to scare off the intruder.

Setup Intelligent tracking

Turn on Intelligent tracking, when iCam365 camera detects human or pet movement, the camera will track the movement of the object.

Alarm message

By clicking on the icon, you can view the Alarm message, and by clicking on the message, you can view the details.

Lighting and night vision

In the Lighting and night vision screen, you can set the light lamp and Night vision mode.

White light lamp

· Automatic: The white light lamp is turned on when an event is found at night, and automatically turns off after the event is over.

Night vision mode

· Automatic ：When the light is poor, the infrared night vision mode is automatically turned on.

· Always in the night vision mode ： Suitable for a dim-lighted environment

· Turn off the night vision mode ：Suitable for an environment where the light is always bright

Reset iCam365 camera

1.Turn on the power and wait for the camera to start

2.Press and hold the reset button (about 5 seconds) until the camera sounds a voice prompt

Function Description

Function	Description
Real-time and Playback	Click the screen on the device to enter the device real-time page to view the real-time camera screen. You can also switch to Playback to view the historical video. The recording can be divided into event recording and round-the-clock recording. You can select the recording mode as required.
Alert	The device will push an Alert message when it detects any movement or sound. You can select the type of Alert message to be received on the setting
Pan/tilt head and talk	On the real-time page, you can adjust the orientation of the remote camera through the disk of its pan/tilt head, or push and hold the microphone to send voice to the remote camera.
Sharing	Enter the mobile phone number of your family member on the Sharing page. The shared people shall download the APP and register. Each device can be shared by up to 10 accounts. The shared people can view the live video, talk to the camera and view the video through the pan/tilt head, but he/she cannot make settings
Alarm	Ilt gives the voice and light alarm when detecting a movement event or a manlike shape event (purchase separately). You can also customize the voice
Setting management	Click‘’on the home page or click “” on the real-time page to enter the setting management. On the setting page, you can modify device names, purchase services, share devices, access Store Settings, Screen Settings and other Settings.
Binocular camera	If you are purchasing a binocular camera, the following function are currently supported: 1. supports the Picture-in-Picture display. You can click Picture-in-Picture to enable or disable the function. 2. supports the switch between the small picture and the big picture. Click the long shot or close shot or small picture to switch. 3. its Playback function also supports the switch between the small picture and big picture and enabling/disabling of the small picture window.

iCam365 Camera Troubleshooting

You can find here how to fix iCam365 camera can’t connect to wifi, offline and not working problems.

How to fix not connecting to iCam365 camera?

Fix can’t connect to wifi

iCam365 camera can not connect to wifi usually caused by the following problems, you can follow the guide below to fix the problem of not connecting to wifi.

1. Make sure the iCam365 camera is currently in waiting connection mode.

· After the camera is powered on, wait for the camera to start up (about 30 seconds), the camera will send out a voice prompt ‘Camera start up is complete, waiting for the network to be added’.

· No voice prompt, please reset the iCam365 camera

2. Make sure iCam365 camera supports your wifi.

iCam365 camera only supports 2.4Ghz wifi, wifi name and password support English, alphabet and numbers.

3. Please put the camera next to the router, and then connect the camera

4. Make sure your wifi password is correct

5. Change the mode to connect to iCam365 camera

iCam365 supports two modes of camera connection.

· The camera can not scan the QR code, please try to use Quickly add.

· If you can’t connect to AP hotspot, please try Scan code to add.

6. Reboot the router, sometimes the router fails to connect to the new device.

Voice Troubleshooting

If the above problem can not fix the wifi connection problem, please follow the iCam365 camera’s voice prompts to fix the problem.

.

See also  How To Setup iCam365 camera（Complete Manual Guide）

.

Voice: Router connection failed, please reconfigure the network

It means iCam365 camera can’t connect to wifi, please check your wifi information and reset the camera to reconnect.

Voice: Receiving wifi information, connecting to server

It means iCam365 camera can’t connect to the internet, maybe the camera is too far away from the router, please get closer to the router.

Voice: Please program the ID number.

This may be a Chinese voice, iCam365 camera does not program ID, can not use.
We suggest you to return the camera directly, or contact your seller for support, you need a computer to fix this prob.

After iCam365 camera start, there is no ‘camera start up is complete, waiting for the network to add’ voice, after resetting the camera, there is no voice either.

iCam365 camera hardware failure, please return the camera.

How to fix iCam365 camera offline?

Follow these steps to fix iCam365 camera offline problem.

1.Restart the iCam365 camera

2.Reboot the router

3.Reset the iCam365 camera to reconnect.

If the above steps can fix the camera but it is often offline, then the camera may be too far away from the router, we recommend to move closer to the router.
Or please check the following issues in order:

1.Make sure the iCam365 camera has power

2.Make sure the iCam365 camera is connected to the router is normal

3.If you have changed the Wi-Fi or password, please reset the camera to reconnect

4.iCam365 camera is not too far away from the router, separated by walls or other obstructions

5.Take out the memory card, then restart the iCam365 camera, if the camera works normally, then it is the problem of memory card, please replace the memory card or format the memory card

.

Common Problem

What WiFi does the iCam365 camera support?

1. The camera does not support 5G frequency WiFi, if it is connected, please switch to 2.4G frequency WiFi
2. wifi name and password are recommended to use English, English symbols and numbers, can not contain Chinese and special characters.
3. the router can not open such as AP isolation, anti-scratch, black/white list and other options to restrict WiFi access
4. The camera does not support WPA/WPA2 enterprise WiFi for the time being

Why can’t I connect iCam365 camera.

Check if the WiFi password is correct, and if the network is connected correctly, reset the camera.Add the device again when the above operation is done.
Or check iCam365 Camera Troubleshooting

How many accounts can an iCam365 camera be added to?

iCam365 camera can only be added by one account, you can share the camera to other users, up to 10 users.

Is there a computer software for iCam365?

iCam365 supports windows system, you can download iCam365 For Pc here.

Why can’t I receive iCam365 alarm messages?

1. Make sure the phone system has enabled the push permission of icam365
2. Check whether push is turned off in camera settings-Notification settings.

How many days are iCam365 alarm messages saved?

Alarm information can be stored for up to 7 days.

What memory cards does iCam365 camera support?

iCam365 camera supports minimum class10,4-128G memory card.
It is recommended to choose Samsung or Sandisk memory card, poor memory card will cause recording problems or cause the camera not work properly.

The video cannot be playback?

The recording is divided into event recording and round-the-clock recording. Event recording:
The camera records the triggering event until its end. It keeps recording if the event keeps triggering it.

Round-the-clock recording: The camera records round the clock.
The round-the-clock recording will occupy a huge space of the memory card. Please select the recording mode as required.The path setting of the recording mode: Setting-> Memory card -> Recordina mode

How should I download the video to my mobile phone?

1. Click the Recording button “ ” while viewing the playback video.
2. Click the Stop button” ” when the playback is finished, and the video will automatically be saved to the album.

Why iCam365 camera is offline?

First, check if the power supply and the network are normal. If they are normal, power off the camera and restart it. If the device is still offline after restarted, eliminate the camera in the APP and add it again.

Why does the iCam365 camera show no memory card?

1. The camera does not support hot-plugging. You need to power off the camera to insert the memory card. Please restart the camera.
2. If the memory card still cannot be identified after the camera is restarted, please replace it with a new card and try again.
3. If the new card still cannot be identified, the card slot may be damaged, or there is a failure in the FFC. Contact the supplier to replace the device.

What shall I do if the memory card is full?

No need to handle it manually. The camera automatically overwrites the earliest video documents when the spare space of its memory card is 500M or less.

iCam365 For PC

iCam365 For PC only has simple functions, watch live video, view footage, control rotation, voice intercom. Only in the iCam365 app can you set up the camera.

You need to add a camera in the iCam365 app and then log in to iCam365 For PC, you will be able to see the camera.

Windows

Latest version: 1.1.8.4

Historical version: 1.1.7.3

iCam365 For MAC

iCam365 only supports Windows computers, not MAC computers, but iCam365 supports rtsp, so you can use a VLC player to play live video from your iCam365 camera.

Or you can install the iCam365 APP on your MAC, the M series chipset mac supports direct APP installation.

1. Click on Flie, select Open Network, then enter the rtsp of the iCam365 camera

.

<p>The post iCam365 camera Complete Guide first appeared on NVR IPCAMERA SECURITY.</p>

The Indoor Camera Pro does its job even if the Wi-Fi goes down with built-in recording and Vivint Playback DVR*—which offers limitless recording for up to 10 days. And built-in storage means faster clip retrieval and smoother video playback. See what’s happening at home, no buffering required.

The Indoor Camera Pro’s elevated night vision, field of view, and image quality create a clearer picture—day and night. Housed in a new sleek design with more flexible mounting and placement options, set up the camera nearly anywhere in your home to get the view you want. It’s next-level visibility, next-level protection.

Vivint Indoor Camera – Frequently Asked Questions

The Vivint Indoor Camera was previously known as the Ping Camera.

What is Privacy Mode?

Privacy mode allows you to temporarily disable your camera’s remote viewing and recording capabilities. While in Privacy mode, your camera will display a blue screen in your mobile app.    

Can I install a new camera or move my old one?

Normally a Vivint Smart Home Professional will install and position your Vivint Indoor Camera, but after installation you can move your cameras wherever you want. If you move your cameras or receive a new camera and would like to learn how to, see Vivint Indoor Camera – Installation Guide.

What do I do if my recording schedules aren’t working?

If your Vivint Indoor Camera’s schedules are not working, make sure that your camera is working and that the light on the front is green.

If everything is working, check and make sure that your schedules are turned on in the Recording Schedules section for your cameras.

If they still aren’t working, you may need to delete and recreate them. See Vivint Indoor Camera – Create Custom Recording Schedules.

How can I set up recording schedules for my Vivint Indoor Camera?

You’ll set up all recording schedules online. See Vivint Indoor Camera – Create Custom Recording Schedules.

.

Vivint Indoor Camera – Identify LED Meanings

The Vivint Indoor Camera was previously known as the Ping Camera.

White: Connected/normal operation

No Light: Privacy mode enabled or no power

Blue: Two-way talk

Green: Ready to connect

Yellow: Rebooting

Red: Not connected to the panel

Breathing White: Connected to the panel, but not connected to the internet

Vivint Indoor Camera – Landing Page

This article serves as an information hub for the Vivint Indoor Camera. The Vivint Indoor Camera was previously known as the Ping Camera.

Important Notes

Common Issues

For more detailed information about device specifications, click here. To review Frequently Asked Questions about this device, click here.

.

Vivint Indoor Camera – Offline

The Vivint Indoor Camera was previously known as the Ping Camera.

If your Vivint Indoor Camera shows it’s offline, you can take these steps to fix the issue.

Make sure the camera has power

Make sure the camera is plugged into a working outlet and the cord is securely plugged into the back of the camera.

To test the outlet, unplug the camera and plug a different device into the same outlet. If it also doesn’t receive power, try restoring power to the outlet.
Show me how

Reboot your panel

Takes 10-15 minutes.

Show me how

Restart your camera

Unplug your camera for 30 seconds, then plug it back in.

Restart your router

Unplug your router for 30 seconds, then plug it back in. If you have multiple routers or a separate modem, restart them as well.

Vivint Indoor Camera – Not Recording Clips

The Vivint Indoor Camera was previously known as the Ping Camera.

If your Vivint Indoor Camera is online and you are able to see the live feed, but it is not recording any clips, there are a few things you can check to fix the problem.

.

Vivint Indoor Camera – Installation Guide

Congratulations on your new Vivint Indoor Camera (formerly called the Ping Camera)! Let’s get it set up and integrated into your system right away. This article will walk you through the process, whether you are starting off fresh, or replacing an existing camera.

Low effort
Typically takes 5-10 minutes
Must be completed at home
You will need:

Disarm your system

Open Video in New Tab

Remove your existing Vivint Indoor Camera

*Skip this section if you’re not removing an existing camera.

If you’re replacing an existing camera, delete it from the panel by tapping: Menu, Devices followed by your 4-digit PIN, Cameras (select the device you want to remove), then Delete. Once deleted from the panel, physically remove it and return as instructed by Vivint.

Open Video in New Tab

Decide where you want your new camera

Make sure it’s within 200 feet of the panel and there are as few obstructions (walls, furniture, etc.) to line of sight as possible. You can either set your camera on a flat surface or mount it to a wall. To mount the camera, use the included screws and/or drywall plugs to mount the magnetic base plate, then attach the camera to the magnetic base.

Plug in your camera

It will take just a few minutes for it to boot up.

Go to your panel settings

From the home screen, tap the three dot Menu icon in the bottom right corner, tap Devices under SMART HOME SETTINGS, then enter your 4-digit PIN.

Open Video in New Tab

Add your Vivint Indoor Camera

Tap Add new device, then tap Vivint Indoor Camera.

Open Video in New Tab

Follow the prompts on your panel

Adjust camera settings as needed

From the panel, go to Devices, Cameras, then choose your new Vivint Indoor Camera and adjust the settings as desired.

Open Video in New Tab

Not working?

Unplug the camera for 30 seconds, then plug it back in. If you need additional assistance, please contact us.

Have more questions about your Vivint Indoor Camera and how to use it?

A library of content about your device, including general information, troubleshooting, and how to’s can be found here.

Vivint Indoor Camera – Initiate 2 Way Talk from the App

The Vivint Indoor Camera was previously known as the Ping Camera.

Your Vivint Indoor Camera enables you to stay connected to your home and family, even when you are away. When viewing the live feed of your Vivint Indoor Camera, you will be able to hear what is going on in the home. If you would like to initiate the two-way talk feature from the Vivint Smart Home app, follow the steps below. 

Vivint Indoor Camera – Enable Motion Triggered Clips

The Vivint Indoor Camera was previously known as the Ping Camera.

If you would like your Vivint Indoor Camera to record a clips when motion is detected, you can enable motion triggered clips from your Vivint Smart Home app by following these steps:

Vivint Indoor Camera – Adjust Video Motion Detection

This article explains how to adjust the video motion detection settings for your Vivint Indoor Camera. The Vivint Indoor Camera was previously known as the Ping Camera.

There are three settings that directly affect the motion detection performance of your Vivint indoor camera. Below is a description of what each setting is and how to optimize them.

To learn how to adjust your video motion detection settings, follow the steps below based on your panel type.

.

Vivint Indoor Camera – Enter Privacy Mode

The Vivint Indoor Camera was previously known as the Ping Camera.

Privacy mode allows you to temporarily disable your Vivint Indoor Camera’s remote viewing and recording capabilities. While in privacy mode, your camera will display a blue screen on your online account. To enter privacy mode, complete the following steps:

Vivint Indoor Camera – Test

The Vivint Indoor Camera was previously known as the Ping Camera.

When your Vivint Indoor Camera is installed and set up, you can test it to ensure it is working properly. You can test your camera from either your SkyControl panel or the Vivint Sky app. To test your camera, follow these steps:

From the SkyControl Panel

Vivint Indoor Camera – Initiate One-Touch Call Out

The Vivint Indoor Camera was previously known as the Ping Camera.

Want a quick and easy way to get in touch with your family? You can initiate the one-touch call-out feature on the Vivint Indoor Camera by following the steps below.

Vivint Indoor Camera – Delete and Re-Add

The Vivint Indoor Camera was previously known as the Ping Camera.

If your Vivint Indoor Camera camera shows as offline and you have already followed the troubleshooting steps here, you will need to delete and re-add your camera to your panel. Follow the steps below to learn how.
.

Delete your Vivint Indoor Camera from your panel 

Factory reset your Vivint Indoor Camera

Get the panel ready to add your Vivint Indoor Camera

Add your Vivint Indoor Camera

Vivint Indoor Camera – Create Custom Recording Schedules

The Vivint Indoor Camera was previously known as the Ping Camera.

You can create system-triggered recording or motion-triggered recordings for your Vivint Indoor Camera.

A system triggered recording means your cameras will start recording when an event is triggered by part of your system, i.e your panel, door locks, etc.

.

<p>The post Vivint Indoor Camera Setup and User Guide first appeared on NVR IPCAMERA SECURITY.</p>

ACH20-1B Thermal Monocular Camera: Using the App

Take some time to learn about using your thermal monocular camera through the companion Thermal Connection app.

Live View Settings

The Live View is the first screen you will see when your camera connects to the app. It includes the following features:

Digital Zoom

Zoom in on a certain part of your camera’s image to magnify details.

1.From Live View, tap .

2.Tap your preferred zoom range.

3.Tap OK to save.

Color Palette

Select your camera’s color palette for enhanced visual representations of thermal imaging.

1.From Live View, tap .

2.Tap on one of the following color palettes:

Note: Not all color palettes are suited for every situation. Select the option that best shows the thermal differences for your specific application.

Record Images & Videos

1.From Live View, tap .

2.Tap the screen to display the capture and record icons.

3.To capture images: Tap .

4.To start or stop recording videos: Tap .

Note: A blinking red dot next to a recording timer on the left of the screen indicates that your camera’s recording.

Function Settings

Enable some of your camera’s features, like the laser pointer, fire detection, or track hot and cold points.

Laser Pointer

Use the laser pointer to illuminate a point of interest with a bright spot of colored light.

 LASER RADIATION:

Exposure to laser light can cause significant damage to the eyes. Never look into the laser beam directly or through a piece of optical equipment.

After a few seconds, the laser pointer automatically turns off.

Fire Detection

Detect fires in your camera’s image with a red box surrounding the source. If enabled, you can set the fire detection sensitivity from high to low.

Hot & Cold Points

Track the hottest and lowest temperatures in your camera’s image at the same time. If enabled, your camera’s image will display a red target tracking the hottest point and a blue target tracking the lowest point.

System Settings

Customize your camera’s system settings or sign out.

Automatic Sleep Mode

Select how long your camera waits before entering sleep mode.

Automatic Shutdown

Select how long your camera waits before turning off.

Change Measurement Unit (Meter to Feet)

Change your camera’s measurement unit.

Sign Out

Disconnect your camera from the app by signing out of the app.

Restore to Default Settings

Restore your camera’s menu and app settings to its factory default settings.

ACH20-1B Thermal Monocular Camera: Troubleshooting

The following article provides some troubleshooting tips for using your thermal monocular camera.

.

Camera’s image/screen is blurry.

Adjust your camera’s diopter to your eyesight. Before you begin, it is highly recommended that you adjust your camera’s diopter to your eyesight. Focusing your view will minimize eye strain and fatigue.

Camera’s Wi-Fi hotspot is not showing.

• Wait a moment for it to appear in your phone’s Wi-Fi settings.

• When enabling your camera’s hotspot in your camera’s settings, try to press  a couple more times.

• Ensure you have allowed the app to use your location, otherwise it will not be able to detect your camera’s Wi-Fi. Navigate to your phone’s settings, then open the Thermal Connection app settings, and enable Location — While Using the App.

Camera is not connecting to the app.

The Wi-Fi password is case sensitive. Make sure you enter the serial number in the same letter format, whether that is uppercase or lowercase.

Camera has disconnected from the app.

Camera’s Live View is frozen in the app.

If the Live View is frozen perform a hard close of the app, then open it again.

Digital zoom is not working.

Digital zoom will not work while your camera’s menu is open. Press  to exit the menu.

Camera is not recording images and videos.

Recording images and/or videos will not work while the menu is open or when your camera is connected to a computer. Press  to exit the menu.

Camera’s screen is black.

Restart your camera. Press and hold  to turn your camera off, and then back on.

Camera is not charging or slow to charge.

• Ensure you use the supplied micro-USB cable and that it is properly connected.
 DANGER

◦ Improper battery replacement or use may result in fire, explosion, or other hazards.

◦ Only use accessories regulated by the manufacturer. Never use the charging cable or power adapter with another product.

◦ Make sure the plug is properly connected to the power socket.

◦ DO NOT charge your camera within 2 m of flammable materials.

◦ DO NOT connect multiple devices to one power adapter. The plug in the power socket could overheat and possibly cause a fire.

• Ensure the USB Mode is set to Off.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to USB Mode.

◦ Press  to open the setting.

◦ Press  to select Off.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

Camera’s battery keeps draining.

You can preserve your camera’s battery life in the following ways:

• Turn off any camera settings or functions that are not being used.

• Use your camera without the app. First, sign out your camera from the app, and then turn the Wi-Fi hotspot off. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to WiFi.

◦ Press  to open the setting.

◦ Press  to select Off.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• Set your camera to go into automatic sleep mode after 1 minute of inactivity has passed. First set your camera’s sleep mode (Suspend Mode) to be automatic, and then set the automatic sleep mode (Auto Suspend) to 1 minute.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to Suspend Mode.

◦ Press  to open the setting.

◦ Press  to select Automatic.

◦ Press  to confirm your setting.

◦ Press  to navigate to Auto Suspend.

◦ Press  to open the setting.

◦ Press  to select 1 Min.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• Set your camera’s screen brightness to low.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to Brightness.

◦ Press  to open the setting.

◦ Press  to select Low.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• Set your camera’s automatic shutdown to 60 minutes or less. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to Auto Shutdown.

◦ Press  to open the setting.

◦ Press  to select 60 Mins or less.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

Camera’s image has lots of graininess or scratches.

• Turn your camera off, attach the lens cap, and allow it to rest for a few hours before using again.

• To improve your camera’s image quality set the FFC Mode to Auto. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to FFC.

◦ Press  to open the setting.

◦ Press  to select Auto.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

• To manually correct pixel defects in your camera’s image, set the DPC settings to Manual. 

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to DPC.

◦ Press  to open the setting.

◦ Press  to select one of the options:

· Auto: (Default) Your camera automatically calibrates defective pixels.

· Press  to start auto DPC.

· Close the lens cap until your camera signals that auto correction is complete.

· Manual: Correct the defective pixels manually.

· Press  to start DPC manually.

·  Press to switch between the X-axis and Y-axis.

· Press and hold  or  to start correction.

· Restore: DPC is restored to original state.

◦ Press  to confirm your setting.

◦ Press  the exit the menu.

ACH20-1B Thermal Monocular Camera: Frequently Asked Questions

The following FAQ answers many of the general questions about your thermal monocular camera.

.

How does my thermal monocular camera work?

To improve the visibility of objects in complete darkness, haze, or tough conditions, your thermal monocular camera uses infrared sensors to detect heat given off by a person, animal, or other objects. It creates images of that radiation called thermograms, which display the relative temperatures of different objects with different shades or colors. In a thermogram, warm objects stand out in a contrast or often cooler background. It is widely used in outdoor scenarios for hunting, rescue, animal observation, and more.

Is my thermal monocular camera battery-operated or hard wired?

Your thermal monocular camera is battery-operated, however, to charge the battery you will need to connect the micro-USB cable into your camera’s USB port and the other end into a power source.

Does my thermal camera only work at night?

No. Although thermal imaging cameras are most commonly used for nighttime vision, they can also be useful in daylight. The detection of heat radiation and the high contrast of thermal imaging cameras allow you to see the outlines of (warm-blooded) animals that camouflage well in their environments. It can also help distinguish animals or people in foggy or smoky conditions.

Can my thermal camera see-through walls, metal, or glass?

No, thermal imaging cameras do not see-through surface but detect surface temperatures.

Is thermal imaging and night vision the same thing?

No, thermal imaging can produce pictures without visible light while night vision cameras work by boosting ambient light. Their only common purpose is increasing visibility in low light conditions.

Can bright sunlight damage my camera’s lens?

Yes, aiming your camera’s lens with the lens cap open at powerful light sources (i.e. the sun) is not recommended, as this may adversely affect the accuracy or damage the thermal imager.

What is the clicking noise my camera makes?

This is simply the noise your camera makes while you are shifting it between different fields of view. The noise you are hearing is your camera focusing and calibrating the image to achieve the highest resolution possible.

Should I charge my camera’s battery before first use?

Since your camera’s battery is delivered partially charged, it is recommended that you fully charge it before first use.

How do I charge my camera’s battery?

Your camera has the following 4 battery charging statuses, as shown by the LED charging indicator located under the USB port.

How do I turn my camera on or off?

Press and hold .

Where can I find the mobile app?

The Thermal Connection Application can be downloaded on your smartphone with a valid Internet connection from iTunes or Google Play respectively.

See the article Connecting to the App for more details.

Why do I need to allow my Location Permission on the app?

The app requires permission to detect your Wi-Fi network in order to connect your camera to the app.

How do I connect my camera to the app?

See the article Connecting to the App for full details.

How do I disconnect my camera from the app?

For steps on disconnecting your camera from the app, see the article Using the App.

What is my camera’s Wi-Fi name and password?

Where can I find my camera’s serial number?

Your camera’s serial number can be found on:

• The serial tag located on the side of your camera.

• Your camera’s system information.

◦ Press and hold  to open the menu.

◦ Press  or  to navigate to (System Information).

◦ Press  to open your camera’s system information.

How do I record images & videos?

• To capture images: Press 

• To start or stop recording videos: Press and hold  for 3 seconds. A blinking red dot next to a recording timer on the left of the screen indicates that your camera is recording.

Note: Your camera cannot record images or videos while the menu is open or when connected to a computer.

For steps on recording images and videos from the app, see the article Using the App.

How do I zoom in my camera’s image?

To switch the zoom range: Press . Keep pressing to zoom in and out.

For steps on using digital zoom from the app, see the article Using the App.

How do I turn the laser pointer on?

 LASER RADIATION:

Exposure to laser light can cause significant damage to the eyes. Never look into the laser beam directly or through a piece of optical equipment.

To turn the laser on: Quickly press  two times.

For steps on using the laser pointer from the app, see the article Using the App.

How do I change my camera’s color palette?

To quickly change the color palette: Press .

For steps on switching the color palette from the app, see the article Using the App.

Which color palettes can I choose from?

Select your camera’s color palette for enhanced visual representations of thermal imaging. Switch between any of the following color palettes:

Note: Not all color palettes are suited for every situation. Select the option that best shows the thermal differences for your specific application.

How do I measure my target’s distance?

Measure the range distance between your camera and your target using the pre-set ranging modes for animals, people, etc.

• Press and hold  to open the menu.

• Press  or  to navigate to Ranging Mode.

• Press  to open the setting.

• Press  to select one of the options:

◦ Wolf: Measure your distance from a wolf, with a pre-set height of 1.2 m.

◦ Customize: Enter a custom height to measure your distance from your target.

◦ Wild Boar: Measure your distance from a boar, with a pre-set height of 0.9 m.

◦ Human: Measure your distance from a human, with a pre-set height of 1.8 m.

◦ Rabbit: Measure your distance from a rabbit, with a pre-set height of 0.3 m.

• Press  to confirm your setting.

• Press  to exit the menu.

How do I change my camera’s measurement unit?

For steps on changing the measurement unit from the app, see the article Using the App.

How do I track hot & cold points?

Track the hottest and lowest temperatures in your camera’s image at the same time. If enabled, your camera’s image will display a red target tracking the hottest point and a blue target tracking the lowest point.

• Press and hold  to open the menu.

• Press  or  to navigate to Hot Point.

• Press  to open the setting.

• Press  to select one of the options:

◦ Off: Hot and cold points is turned off.

◦ On: Your camera will track hot and cold points.

• Press  to confirm your setting.

• Press  to exit the menu.

For steps on enabling hot & cold points from the app, see the article Using the App.

How do I enable fire detection?

Detect fires in your camera’s image with a red box surrounding the source. If enabled, you can set the fire detection sensitivity from high to low.

• Press and hold  to open the menu.

• Press  or  to navigate to Fire Warning.

• Press  to open the setting.

• Press  to select one of the options:

◦ Off: Fire detection is turned off.

◦ High, Middle, or Low: Your camera will detect fires based on the sensitivity level.

• Press  to confirm your setting.

• Press  to exit the menu.

For steps on setting fire detection from the app, see the article Using the App.

How do I enable the fire detection alarm?

Set your camera to sound an alarm when fire is detected in the image.

Note: The fire detection alarm works only when your camera has fire detection enabled on either High, Middle, or Low.

• Press and hold  to open the menu.

• Press  or  to navigate to Alarm.

• Press  to open the setting.

• Press  to select one of the options:

◦ Off: Fire detection alarm is turned off.

◦ On: Your camera will sound when fire is detected.

• Press  to confirm your setting.

• Press  to exit the menu.

How do I export recordings?

Export recorded images and videos from your camera’s microSD card.

• Press and hold  to open the menu.

• Press  or  to navigate to USB Mode.

• Press  to open the setting.

• Press  to select Mass Storage.

• Press  to confirm your setting.

• Connect the micro-USB cable into your camera’s USB port and the other end into an available USB port on your computer.

• The microSD card’s storage will open on your computer desktop. Select files to export, then copy them onto your computer.

• After exporting, disconnect the micro-USB cable from your camera and computer.

• Press  to select USB Mode Off.

• Press  to confirm your setting.

• Press  to exit the menu.

Where does my camera store recorded images and videos?

Your camera stores recorded images and videos onto the microSD card.

What is my camera’s maximum storage capacity?

You can insert a microSD card with up to 256GB storage space.

How do I hide the icons on the top right of my camera’s image?

• Press and hold  to open the menu.

• Press  or  to navigate to Status Bar.

• Press  to open the setting.

• Press  to select Off.

• Press  to confirm your setting.

• Press  to exit the menu.

How do I change the language displayed in my camera’s menu?

• Press and hold  to open the menu.

• Press  or  to navigate to Language.

• Press  to open the setting.

• Press  to select your preferred language.

• Press  to confirm your setting.

• Press  to exit the menu.

Note: This will only change the language in your camera’s menu, not the app.

How do I restore my camera’s settings to default?

For steps on restoring your camera’s settings to default from the app, see the article Using the App.

How do I update my camera?

Update your camera through the microSD card.

Note: To download the latest firmware update for your camera, contact the Technical Support team.

• Press and hold  to open the menu.

• Press  or  to navigate to USB Mode.

• Press  to open the setting.

• Press  to select Mass Storage.

• Press  to confirm your setting.

• Connect the micro-USB cable into your camera’s USB port and the other end into an available USB port on your computer.

• The microSD card’s storage will open on your computer desktop. Copy the update program to the microSD card.

• Press and hold  and  at the same time for 3 seconds. A blue screen will indicate that an update is in progress.

After a few minutes the update will complete and you will see your camera’s live view image.

Where can I download my camera’s latest firmware update?

To download the latest firmware update for your camera, contact the Technical Support team.

Can I mount my camera to a tripod?

Yes, the tripod thread can be found on the bottom of your camera.

Can I access my camera’s Live View from an external monitor?

Yes, you can access your camera’s Live View from your computer by connecting your camera using the micro-USB cable.

What is the buzzer option in the app settings?

The buzzer is not compatible with your camera.

ACH20-1B Thermal Monocular Camera: Connecting to the App

Follow the steps below to connect your thermal monocular camera to the Thermal Connection app.

Note: The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: Wi-Fi 2.4 GHz (2.4 GHz to 2.4835 GHz) 20 dBm.

.

Step 1 – Download the App

Download your camera’s mobile app, Thermal Connection.

.

Step 2 – Enable Your Camera’s Wi-Fi Hotspot

Looking into your camera:

• Press and hold  to open the menu.

• Press  or  to navigate to WiFi.

• Press  to open the setting.

• Press  to select AP (Access Point).

• Press  to confirm your setting.

• Press  the exit the menu.

Step 3 – Connect to the App

You will now be able to view your camera from the app and make some minor setting adjustments.

.

<p>The post Thermal Monocular Camera user manual first appeared on NVR IPCAMERA SECURITY.</p>

Learn About Active Deterrent Security Cameras

What Are Active Deterrent Security Cameras?

Active deterrent security cameras aren’t your typical security devices. They integrate advanced technology to proactively prevent criminal activities. Key features include built-in lights, sirens, sounds, and two-way audio.

The Importance of Active Deterrent Security Cameras

You might be wondering, why go the extra mile with these advanced features? Well, the answer is simple: prevention is better than cure. These cameras are designed not just to record incidents but to prevent them altogether.

Crime Prevention

A well-placed security camera can make all the difference. Thieves and intruders are less likely to target a property laden with visible deterrents.

Enhanced Safety

Knowing that your premises are being actively monitored can make you feel safer. Immediate alerts and real-time communication add an extra layer of safety.

Peace of Mind

There’s nothing like the peace of mind that comes from knowing your loved ones and valuables are secure. Active deterrent cameras provide a constant layer of security, ensuring you sleep a little easier at night.

Key Components of Active Deterrent Security Cameras

SIREN AND SPOTLIGHT

Active Deterrence security cameras can activate a loud siren with flashing light or spotlight when motion is activated to deter any potential threats. The light and sound features can be easily customized to meet your specific needs. These cameras are equipped with both traditional infrared night vision and LED spotlight mode for full color images at night when desired. Further, you can set the motion detection to trigger only when humans and/or vehicles are detected to produce the most accurate motion alerts.

Lights

These cameras often come with powerful LED lights that can illuminate large areas. Imagine being able to light up your entire driveway or backyard!

Siren

An ear-piercing siren can scare off even the most determined criminals. As soon as suspicious activity is detected, the siren can be activated to alert both you and the intruder.

Two-Way Audio: A Game-Changer

Two-way audio allows you to communicate in real-time through your security camera system. This feature enhances the effectiveness of the camera by enabling you to interact directly with whoever is on your property.

All our active deterrence security cameras have a built-in microphone and speaker for 2-way audio functionality from your smartphone using our mobile app. The 2-way audio feature provides an extra layer of security by enabling real-time, remote communication with individuals near the security camera. The 2-way audio feature can be used in many different scenarios.

Benefits of Having Two-Way Audio

Advantages of Lights in Security Cameras

Deterrence Effect

A bright light shining in the face of a potential intruder can be incredibly disorienting and threatening. It’s a simple but effective means of deterring unwanted visitors.

Visibility in Low-Light Conditions

If criminals think they can hide under the cover of darkness, security lights will make them think twice. These lights ensure your cameras capture clear footage, no matter the time of day.

Advantages of Sirens in Security Cameras

Immediate Alert

Imagine hearing a siren blaring in the middle of the night because someone tried to break into your home. That’s an alert you can’t ignore!

Deterrence to Intruders

The sound of a siren is universally understood as a signal to leave immediately. It’s a powerful tool that can send intruders running before they do any damage.

Advantages of Sound in Security Cameras

How Two-Way Audio Enhances Security

Real-Time Communication

Two-way audio adds a dynamic layer to home security. You’re not just watching; you’re interacting.

Interactive Deterrence

Being able to speak directly to someone on your property – whether friend or foe – provides a significant deterrent effect. Just imagine telling a suspicious individual that the police are on their way!

Installation and Setup

Easy Installation Tips

Setting up these cameras is straightforward. Most models come with comprehensive guides, and you can have them up and running in no time.

Choosing Strategic Locations

Placement is key. You want to cover all entry points and any other areas that could be potential targets.

Best Practices for Using Active Deterrent Security Cameras

Regular Maintenance

Keep your cameras clean and check for any updates to the software. Regular maintenance ensures your system remains effective.

Updating Software

Cybersecurity can’t be overlooked. Ensure your cameras are running the latest firmware to protect against hacking and other cyber threats.

Popular Brands and Models

Overview of Leading Brands

We at CCTV Security Pros offer a variety of active deterrent security cameras

Comparison of Top Models

Learn more about our top active secuity cameras and systems here!

Cost vs. Benefit Analysis

Initial Investment

Active deterrent cameras can require an upfront investment. However, what you spend now can save you thousands in potential theft or damage costs.

Long-Term Savings

Consider the long-term benefits: lower insurance premiums, reduced risk of theft, and peace of mind. Over time, these cameras pay for themselves.

Customer Reviews and Testimonials

Real-Life User Experiences

There’s no better way to gauge effectiveness than by hearing from those who’ve used these systems. Real user reviews often provide insights you won’t find in product descriptions.

Effectiveness in Various Scenarios

From deterring package thieves to keeping an eye on nighttime activity, these cameras have proven effective in a myriad of situations.

Conclusion

In today’s unpredictable world, security can’t be taken lightly. Active deterrent security cameras with lights, sirens, sound, and two-way audio offer a comprehensive solution to protect your home or business. From deterring intruders to providing you with peace of mind, these advanced systems are worth the investment.

To purchase, learn more, or view our full line of security cameras and systems.

FAQs

.

<p>The post ​Active Deterrent Security Cameras first appeared on NVR IPCAMERA SECURITY.</p>

Troubleshoot Offline Camera

Troubleshoot Offline Camera

Learn how to troubleshoot when a new Verkada camera is offline

Updated over a week ago

Use this article to read through some common scenarios and try the suggested troubleshooting tips to help. If you still need help, please contact Verkada Support.

What is the LED status of the camera?

Camera has been solid orange for over 10 minutes

Camera is blinking blue for over 5 minutes

Camera is solid blue for over 5 minutes, says “waiting to be connected on Verkada Command”

Roles and Permissions for Cameras

Roles and Permissions for Cameras

Learn about the roles and permissions available for Verkada Cameras

Updated over a week ago

This article describes the set of roles and associated permissions for Verkada Cameras.

Org-level roles

Organization-level roles are configured on a per-user basis. Groups cannot be used to set organization-level roles.

Below, click the down arrow to the left of the role to learn more about the role and access.

Org Member

Org Admin

Verkada Cameras Troubleshooting 2024

Site-level roles

Site-level roles can be assigned to individual users or to groups and pertain to a specific site or subsite. Subsites inherit the permissions from the subsites and parent sites above them.

No Access

Site Live-Only Viewer

Site Viewer

Site Admin

CP52-E PTZ permissions

The CP52-E PTZ camera permissions determine who can manage the Sentry Mode feature.

Permissions model (example)

Here’s a simple example of a permissions model that a typical organization with several sites and users may employ:

Users and their required level of access

Permissions each user should be assigned

.

Set Org Admin permissions

Revoke Org Admin permissions

Set site and subsite permissions

You can set site and subsite permissions by adding a user, a group, or by existing users and groups.

Add a user

Add a group

Existing users and groups

You can set the site and subsite permissions for existing users and groups by managing the user roles or the sites.

Manage roles

Manage sites

Customize roles and permissions

Verkada’s Roles & Permissions Customization feature enables Org Admins the ability to add or remove certain permissions from Site Admins and Site Viewers more granularly. Some organizations may want to limit or extend the permissions of the members of their organization based on their needs. Currently, we allow customization of permissions related to archives, link sharing, and user management.

Roles and Permissions for Command

Roles and Permissions for Command

Learn about the roles and permissions available to Command users and groups

Updated over a week ago

This article describes the set of roles and associated permissions for Verkada Command. It also explains how to customize roles and permissions.

Permission levels

Permissions are set at the following levels:

Daha fazla göster

Permissions considerations

Common user permission configurations

Daha fazla göster

Roles and permissions by Verkada product

.

Org-level roles

Org-level roles are configured on a per-user basis. Groups cannot be used to set org-level roles.

Org member

Org Admin

Access Control Role

.

Site-level roles

Site-level roles can be assigned to individual users or to groups and pertain to a specific site or subsite. Subsites inherit the permissions from the subsites and parent sites above them.

No Access

Site Live-Only Viewer

Site Viewer

Site Admin

Access Site Admin

.

Customize Roles and Permissions

Verkada’s Roles & Permissions Customization feature enables Org Admins the ability to add or remove certain permissions from Site Admins and Site Viewers more granularly. Some organizations may want to limit or extend the permissions of the members of their organization based on their needs. Currently, we allow customization of permissions related to archives, link sharing, and user management.

FAQ

Why has my organization disappeared?

Why are cameras missing from my organization?

Why can’t I access certain features or settings, such as other users?

Resolve Issues with Missing Cameras

Resolve Issues with Missing Cameras

Learn how to resolve issues when cameras are missing from your Verkada account

Updated over a week ago

When you log in to Verkada Command, you can only access cameras and video in organizations or sites where your user account has permissions.

Note: Even if you are an Org Admin, you still need to grant yourself permission to view all sites. Learn more about roles and permissions for cameras and Command.

If you log in to Command and cameras are missing or have disappeared, always check user permissions. The most common reason cameras are not visible is that your user account needs permissions to the site(s) where the cameras are configured.

Common reasons that can cause cameras to disappear

Check permissions

If you are an Org Admin, you can check and correct your own permissions:

Resolve Issues with Night Mode

Resolve Issues with Night Mode

Common issues with IR and Night Mode with steps to resolve them

Updated over a week ago

Each Verkada camera has night vision capabilities, using a sensor to detect low-light situations. When external lighting is low, the camera switches to night mode and records in black and white, using infrared (IR) LEDs to illuminate the environment. If the IR is emitted improperly through the dome or reflected into the lens, it negatively impacts image quality.

Common night mode issues

It is imperative that the dome remain free of debris and the camera is installed properly to achieve the best image quality. When viewing footage in night mode if the footage appears obscured it is most likely the result of one of the following scenarios:

Camera always in night mode

If your camera is always in night mode even where there is sufficient light in the environment the lux (light) value may need to be adjusted. If this is the case, reach out to Verkada Support for further assistance.

Environmental obstruction

If the camera is mounted too close to a wall, ledge, or light source, the image quality may be degraded due to IR reflection.

Recommendation. Ensure that cameras are mounted sufficiently far away from surfaces that may cause the IRs to reflect, such as light sources.

IR obstruction

If a first-generation Dome camera (D30 or D50) is operating in night mode when there is plenty of light, the IR sensor is likely obstructed by the camera housing.

To fix the obstructed light sensor, physically rotate the lens barrel assembly 180° so the sensor and IRs are visible through the camera case.

Example: Proper and improper orientation

Note: After rotating the lens barrel, the camera orientation may need to be changed in Command.

<p>The post Verkada Cameras Troubleshooting 2024 first appeared on NVR IPCAMERA SECURITY.</p>

Lorex Fusion: Download the Lorex App

The following article provides instructions for downloading the Lorex App and connecting your Lorex Fusion Collection recorder to the app.

Prerequisite

Before you start, your Fusion recorder must be powered on and connected to your router using the included Ethernet cable. For Basic System Setup instructions, refer to your Fusion recorder’s Quick Start Guide or Manual on the product support page. Visit help.lorextechnology.com and search your Fusion recorder’s model number.

.

Download the Lorex App

Once your Fusion recorder has connected to the Lorex App, complete the final Fusion steps by connecting your Fusion Wi-Fi cameras and accessories.

For setup instructions using the new local UI, please see the article Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories (New Local UI).

For setup instructions using the previous local UI, please see the article Lorex Fusion: Connect Your Wi-Fi Cameras and Accessories.

Lorex Fusion: Frequently Asked Questions

The following frequently asked questions (FAQs) provide more information about your Lorex Fusion Collection. Where applicable, the FAQ includes links to articles where you may find more information.

Lorex Fusion Troubleshooting FAQ.

What is Lorex Fusion?

Our Lorex Fusion recorders incorporate the newest (fusion) technology to connect both Lorex Wired and Fusion Wi-Fi Cameras, Doorbells, Floodlights, and Sensors to one system. Lorex Fusion Wi-Fi Cameras and Accessories can connect to one recorder for continuous 24/7 recording and local, secure storage (up to 10TB). Everything can be accessed from your Lorex App for easy control of all devices.

.

Why do I get an offline message and a blank screen for the (B463AJ) 2K battery doorbell’s channel on the Fusion recorder?

Being a battery-operated doorbell, it will always go to sleep after a period of inactivity to conserve battery life. Once the doorbell is correctly paired to your Fusion recorder, the offline message means the doorbell has gone to sleep but is still connected and can be awakened. When motion is detected, or when the call button is pressed, there will be live video from that channel. You can also manually wake up the doorbell through the Lorex app, by activating the liveview.

.

Can my Battery Video Doorbell record continuously?

To conserve battery life, Wi-Fi Battery Video Doorbells only record when motion is detected. They do not record continuously.

.

Which recorders are part of Fusion?

For a list of Lorex Fusion Recorders, please refer to the Product Compatibility Chart.

.

Can I connect all Lorex Wi-Fi Cameras and Accessories to my Fusion recorder?

Only Lorex Fusion Compatible Wi-Fi Cameras and Accessories can connect to Lorex Fusion Recorders.

.

Which Lorex Wi-Fi Cameras and Accessories are part of Fusion?

See the following list of Lorex Fusion Wi-Fi devices:

.

Should I update my Lorex Fusion recorder’s firmware?

It is recommended to update your system firmware to the latest version to ensure remote connectivity and to support newly added Fusion Wi-Fi devices.