Once you have the NAS setup you can come back to this post and follow the steps below:
.

Step 1: Login to your Synology NAS via a browser​

Step 2: Click the Package Center icon​

Step 3: Search for and install the Surveillance Station software (it should be on the home page of the package center, if not you can use the search bar to find it)​

Step 4: Click the Synology main menu at the top left of your screen and open the newly installed Surveillance Station software​

Step 5: Click the IP Camera icon​

Step 6: Click the add button when the new window open and then click add camera from the drop-down​

Step 7: Select Quick Setup and then click the next button​

Step 8: Enter the camera details manually or click the Search icon next the IP Address box​

Step 9: Check both the Synology Supported Cameras and ONVIF lists (some camera models are not directly supported by Synology, but as long as the camera is ONVIF compliant you should be able to add it to the Surveillance Station software)​

Step 10: Select the camera you want to add from one of the lists and click OK​

Step 11: Check that all the camera details are filled in, including the cameras username & password (also give the camera a unique name to help you identify it from other cameras)​

Step 12: Click the Test Connection button and if the test is successful you’ll get a green tick and a live shot from the camera, you can then click Finish and the camera will be added to your Synology NAS​

If the test is not successful you will have to go back and check the camera’s settings are correct, the most common problem is that the camera has an IP address that is not on your network, after you have followed our instructions from a previous video on how to change the IP address you should get a successful connection and be able to add the camera.

How To Install Synology Surveillance Station

Read Also : Dahua NVR Troubleshoot All Series

.

If you need more help with installing Surveillance Station and adding an IP Camera to your Synology NAS you can watch this video:

.

Synology NVRs and VisualStation​

NVR1218, DVA1622, DVA3221, VS360HD

NVR’s (Network Video Recorders) are a neccessary part of any security setup.
They work to store, playback and support the live feed of security footage from connected IP Cameras, and with Synology, can offer even more.

.

Offering a range of Network Video Recording solutions, from their energy efficient NVR1218, and compact VS360HD, to their deep learning, AI powered DVA series, Synology’s selection of NVRs were designed to appeal to a range of different users and applications.
At Use-IP you can now choose from these four Synology NVRs and decide which is best suited for your needs.
​

.

.

​

NVR1218​

The Synology NVR1218 is a 2-Bay (Reaching a max. of 7 bays, with an Expansion unit) Network Video Recorder, able to support a max. of 12 IP camera channels.
Its design is also fit for a PC-less experiance (only needing to be connected to a monitor) and can be accessed remotely, via Synology’s Surveillance Station, or, DS cam mobile application (allowing for Live view, playback, adjustments, and notifications, on a mobile device).

Key Features:
.

.

.

​

​

Deep Learning NVR (DVA) Series​

The Deep Learning NVR Series combines the Management features of Synology’s Surveillnace Station, with Advanced Analytics, designed to fit deployments of all sizes.
Intelligent Analytics – Included in DVA NVRs to strengthen on-premises security, offering deep learning algorithms and detection profiles
.

Users can choose between the more compact design of the DVA1622, or the larger storage of the DVA3221, the key features of which are both listed below.
​

DVA1622

DVA3221​

.

The DVA Series NVRs also come equipped with the use of Dynamic Maps, allowing for improved situational awareness, and to help users to determine camera/event locations, and provide instant access to video feeds for more efficient site monitoring. This also includes the features listed below:​

.

.

VisualStation

VS360HD
​

Synology’s VisualStation offers a PC-less, live view and playback solution, for your surveillance footage, with the ability to work in mobile environments.
Designed to work as a companion system, the VisualStation also offers an ultra-compact design, and features Synology SurveillanceStation live view and management tools. It is a perfect alternative for a Video recording solution, for users facing budget or space constraints.

Key Features:
.

How It Works:
Plug in an Ethernet cable, connect the VisualStation to a LCD-monitor or TV, log into the Synology SurveillanceStation – and its all set up, for quick and easy use.
.

The VS360HD is also equipped for use in harsh and mobile environments. With a design free from mechanical moving parts, the VisualStation is more resistant against vibration and hardware failure, than other Network Video Recording solutions.
Its design also features a solid outer case, built to keep it running in industrial temperature ranges (-20°c ~ 50°c)
This is what makes the Synology VisualStation both a cost effective, and reliable system, for any user.

.

Synology NAS/SAN Systems​

Synology’s Data Storage/Management Systems come in a range of styles and sizes, each designed to fit different user needs. Being able to appeal to a range of users and suitable for numerous applications, Synology’s NAS/SAN Systems are an ideal addition to any personal data management, business data management, or security setup.
Choose from Synology’s range of NAS types; RackStations, DiskStations, FlashStations, and more.​

What is a NAS?​

NAS = Network Attatched Storage.
A NAS is a device that provides users with a networked location to store their data, and are designed to be equipped for use at home or for businesses (or other applications).
But a Synology NAS has even more to offer, as they are designed to offer private cloud storage, backup systems, and secure file sharing.
​

Benefits For Home Use

The DiskStation Manager 7.0​

The DiskStation Manager is the operating system for Synology NAS systems, it was designed with focus on reliability and impressive performance, and offers users a wide range of data management features.​

Users can also feel secure when using their Synology NAS, as the DiskStation Manager offers Secure Sign-in, with app-based login approval, hardware security keys, and 2-factor authentication options. Keep your data, and your data management, as secure as possible.

.

Data Backup Solutions​

With the DiskStation Manager as its operating system, a Synology NAS will also offer users a selection of effective and reliable backup solutions, which include:
.

Active Backup for Business
Expands user data protection with agent-based Linux backup, possible for five major distributions, and AES-256 encryption.

Active Backup for Microsoft 365 / Google Workspace
Maintain offsite copies and restart backup tasks in a different location.

Hyper Backup
Protect data with backup support for DSM settings and 12 additional software packages.

Synology C2
Synology’s Cloud Storage Solution
Back-up NAS data to the cloud (with Hyper backup), and, sync requested data between C2 storage and branch offices (with Hybrid share)
​

Synology NAS Systems also include the Btrfs File System, that allows for even more backup solutions, so users can keep their data as secure as possible (keeping data safe even in the event of data corruption or system failure). These Solutions include:
.

.

.

.

Synology’s NAS Lineup
Now Avaliable at Use-IP​

​

RackStations​

A selection of Rackmount style NAS Systems.
Synology RackStations offer impressive performance and large storage space, all in a rackmount design.
​

XS+/XS Series – RS4021xs+, RS3621xs+, RS3621RPxs, RS1619xs+
+ Series – RS422+, RS820+, RS820RP+, RS1221+, RS1221RP+, RS2421+, RS2421RP+, RS2821RP+
Value Series – RS819
.

DiskStations​

A style of NAS perfect for a Desktop application.
Synology DiskStations range from being compact storage solutions for Business environments, to being an ideal starting point for Home users.
.

​

XS+/XS Series – DS3622xs+, DS1621xs+
+ Series – DS220+, DS420+, DS620slim, DS720+, DS920+, DS1522+, DS1621+, DS1821+, DS2422+
j Series – DS220j
.

FlashStations​

Synology’s FS Series, with an All Flash Array, Rackmount design.
Synology FlashStations offer uncomromising performance, and solid-state drives. Perfect for more demanding applications, and to accelerate Business operations.
.

FS Series – FS6400, FS3600, FS3400, FS2500

.

SA, HD, and, UC Series​

All in a Rackmount style, these NAS systems appeal to a range of storage requirements.​

SA Series – Offers a Scalable storage solution (ideal for enterprises) with high-performance and capacity requirements. – SA3600, SA3400, SA3200D
HD Series – Offers a High-density SAS Storage server, designed for Rapid data scaling, optimizing operational efficiency, and IT infrastructure.- HD6500
UC Series – Offers a dependable high-avaliability SAN Storage solution, fit for iSCSI and FC environments. – UC3200

.

.

​

Expansion Units​

Synology NAS/SAN Systems can also be expanded, with compatible Synology Expansion Units.
Increase your storage space by adding additional drive bays, using a range of Expansion Unit models, also avaliable at Use-IP

FX2421 – Expansion for FS6400, FS3600, and, FS3400
RX6022sas – Expansion for HD6500
RXD1219sas – Expansion for SA3200D and UC3200
DX1222 – Expansion for DS3622xs+ and DS2422+
RX1222sas – Expansion for SA3600 and SA3400

<p>The post How To Install Synology Surveillance Station first appeared on NVR IPCAMERA SECURITY.</p>

WIRELESS KIT

V 3.0

Statement

Long time bright:IPC and NVR have been coded, the connection status is normal Slow Flash : IPC is coded with the NVR, but the connection is disconnected Note: In night vision mode, the device is normal for 5s, the indicator light will be turned off to prevent light interference.

Thank you for purchasing our product! This quick user guide will talk about main usages of the product.More information can be found on our website and the help center. This user guide may contain inaccurate content due to hardware and software upgrade.lt is subject to change without previous notice.

► Installation Instruction Of Wireless NVR KIT

Note:

► Safety Caution

O Please do not put any fluid container on the product.

0 Please use the product in ventilated environment and prevent blocking the vents.

0 Please use included power supply with the product to prevent damage to the product.

0 Please use the product under its standard working temperature and humidity.

(advised in this manual or distributor’s website)

0 Dust on PCB may cause short circuit.lt is suggested to clean the dust on PCB timely to make the product work properly.

0 Please obey the regulation and policy in your country and area during the installation of this.

Out Of Box Audit

After receiving the product,please check all products and accessording to distributor’s Package Includes information.If any is missed or damaged,please contact the distributor.

Wi-Fi NVR Kits User Manual

Read More :

• XMARTO NVR WiFi PTZ Camera System FAQ
• HiSeeu Wireless Camera System installation guide
• Wireless Recorder Kit Setup Guide

Before Installation

This product may require cabling , we suggest to test all products & parts before installation and cabling.

0 Wireless Antenna Ports: Dou ble antennas to Wierless range;

0 WAN Port:Connect your NVR to Internet; ©VGA PortTor viewing on VGA monitor;

0 HDMI PortTor viewing on HDTV;

0 USB PortsTor mouse and backup;

0 Power Input

IPC with RJ45 connector

©Wireless antenna:Wireless connection with NVR

© DC Port: Input power 12V1A;

© RJ45 Port: For matching code and wired connection between IPC and NVR.

Anyway, there is range limitation for the wireless signal from NVR. When cameras are out of this range, they can’t be connected to NVR wirelessly. Then users can use network cable to connect cameras and NVR.

0 Reset button: Press reset button for 5 seconds to restore factory setting and enter into matching-code mode.

©Status light:

Unbright: IPC system is not ready or abnormal

Flash: IPC is in the code-matching state

Wireless NVR can’t be connected to Wireless router wirelessly at present. They can be only connected by network cable.

Setup The System

This system is standalone with embedded Linux Operating System in the NVR. Just like a desktop PC, need to hook a screen to the NVR to enter the OS. Any TV, monitor with VGA or HDMI input should work for it.

© Install antennas for cameras and the NVR;

0 Connect a screen to the NVR via its HDMI or VGA port(HDMI and VGA cable not included);

0 Plug the NVR to power(use bigger 12V 2A power adapter;

0 Plug cameras to power(use smaller 12V 1A power adapters);

0 Within seconds, you should see camera’s images on the screen;

0 Plug the mouse(included)to an USB port on back of NVR. You shall then be able to operate on the system.

In the OS you can find fullest functionalities including live view, record, playback, video backup and all settings.

Default ID: admin Password: none (means leaving the password empty, just click login). Tips: To protect your privacy, please set your password at earliest convenience.

Right click the mouse^Go to System Setup^System Admin -^User Management to set password.

>HD Install

The system may not include hard disk depending on the kit you selected, the NVR works most 3.5″ SATA HDD or 2.5″SATA HDD

Q Unplug your NVR from power,unscrew and remove the top cover.

Q Connect the SATA power and data cables from the NVR to the corresponding ports on your HDD (as shown).

Q Holding the hard drive and the DVR ,gently turn it over and line up the holes on the hard drive with the holes on the NVR. Using a phillips screwdriver,screw the provided screws into the holes and assemble the cover.

Note: New HDD have to be formatted before recording.

To get better Wireless signal, it had better place the NVR in open area and high position.

Network Setup

► Video Playback

Wireless NVR supports wired internet and wireless Internet two ways to access the Internet (supported by some models). The two Internet access modes are set as follows:

Wired internet access: Connecting NVR with network cable to the router will automatically obtain network settings for automatic internet access. When the network cable is plugged in, NVR will give priority to wired internet access. Wireless internet access: Right mouse button -system settings-in the network settings interface, if “wireless internet access” option is in the lower left corner, indicating that the model supports wireless internet access, and can set wireless internet access according to the figure below. After connecting to the network, you can use mobile app to add cloud ID for remote monitoring.

Steps: Right click mouse in main menu^Video playback^choose date, channel, record mode^click Searclwthen can view playback file.

Warm prompt: m □

O Illustration for playback button: ^J)lay, pause: fast forward x2,x4,x8;

© Play file:Choose the recording file in file list, as number “1 ” shown in picture. Choose one

of the recording, click “play” to play to recording file;

© Video backup: Choose the recording file in file list, as number “1 ” shown in picture. Insert the U flash disk, click “video backup” to backup the file;

0 Timeline: click “date” and “time” at left bottom to check the timeline of recording, show

annel Setup

GW-083A2F008BD9

TEST_WIFI

RI 1/2 [>1

6. Tips for successful router connection

1.Choose wireless Internet access

General Setup Record Setup

Select network…

NVR083a2f098f10

NVR083a2f01dc3f

NVR083a2f01dc34 NVR083a2f098f12 NVR083a2f080b0c

2. Check and click “Apply”then enable the internet funtion

B-LINK_B640D2

11111111 |

4. Fill in the router password

5.Click “Apply” button

number “2” shown in picture;

© On the timeline with recording file, left click the mouse, then can playback the file.

► Record Setup

► Video Backup

► View On Mobile

©APP Download and Installation Users can search “EseeCloud” on APP store or “IP PRO” on Google Play,or scan the QR code below to install the APP.

Note: For IOS system, it requires IOS 8.0 version or above. For Android, Android 4.4 or above.

EseeCloud APP download

The factory setting defaults to full-day recording. If you need to customize the recording type, you can refer to the following settings:

o Time Recording: Setup period of time of recording on NVR GUI. Right click mouse -^System Setup—»Record Setup—»Record Plan. Click “Time” and put mouse icon on the upper left corner (for example “1” as picutre shows), press and drag the mouse to the right to choose the time. The list will turn to red.

© Motion Recording: Only detect motion and then start recording. Right click mouse -^System Setup^Record Setup^Record Plan. Click “Motion” and put mouse icon on the upper left corner (for example “1” as picutre shows), press and drag the mouse to the right to choose the time. The list will turn to green.

© Alarm Recording: Right click mouse^System Setup^Record Setup^Record Plan. Click “Alarm” and put mouse icon on the upper left corner (for example “1” as picutre shows), press and drag the mouse to the right to choose the time. The list will turn to yellow.

Note: Users can setup any period of time they want, for example 0:00:00-23:59:59, That’s 24 hours*7 days recording. When NVR detects hard disk, the default setting will be 24 hours*7 days recording.

Use U disk to copy video, so easy and convenient!

O 2 USB port: Plug U flash disk into the USB port of NVR. Right click on main menu^video backup^choose backup channel^choose video mode^setup searching time^search -^choose recording file on the list^video backup .

(support 32G U flash disk at max. Recording file is packed one hour per time.)

© 1 USB port: Right click on main menu^video backup^choose backup channel^choose video mode^setup searching time^search^choose recording file on the list^video backup, insert U flash disk within reminding 1 minute, then the system will backup recording file to U flash disk.

ft Add the NVR system to your APP device list

Run ” EseeCloud” app, log in your account ^ click “+” to scan the device ID QR code to add the device (find the ID number in the NVR network settings, or click the lower right screen), device description (my device name), user name (default user name is admin) and password (default password is empty) ^ submit your add device form ^ click device to start previewing video.

Tips: If you’ve set a password on your NVR system, please update your password on APP to view.

• General setup

(This enables you to set)

Language

Time

Display resolution

HDD informaion

• Record setup

(This enables you to set)

Record plan for each channel video detection

• Network setup(This enables you to set) All network related settings.

• System admin

(This enables you to set)

System version

System maintenance including system upgrade

User and password management Restore to default settings System log

• Channel setup

(This enables you to set) Manage channels and cameras

correct method fault method

D Delete Repeater

Move the mouse to targeted channels, left click to delete, and then click “Apply” and “OK”.

A Application Example

u Use Antenna Extension Cord to prolong Wirelessdistance

Installation method of

As picture shown above, when IPCAM1 is put somewhere is out of NVR wireless range, and there is IPCAM2 between them with strong wireless signal, users can put IPCAM1 close to NVR and power it, setup IPCAM1 repeated by IPCAM2, and then install IPCAM1 to the presupposed place.

L» Playback On Mobiles

In the EseeCloud APP, while viewing live video of the system, click Playback, you will enter the remote playback menu. The APP automatically playback camera 1, you can switch channels the CH. Tips: Videos in playback are HD@real time which requires very good transmission ।

condition. We suggest to playback in LAN. Remote I

playback out of LAN may not 100% work due to connection &network condition.

My device

My device

> MENU-DO What

m Menu bar

Click right button you can enter the main menu; click right button again you can exit the current menu or return.

• Split screen: Change status of live view. You can choose to view multiple cameras or any single camera.
• Video Manage: Manage IP cameras and NVR channels.
• System setup: All system settings.
• Video playback: Playback recorded videos.
• Video backup: Backup recorded videos.
• Color adjust: Adjust the image setting of each camera.
• PTZ Control: Control or set up camera(PTZ camera only).
• Volume: Adjust volume of audio cameras(works only for audio cameras).
• Setup Wizard: Step by step guide of 1st time general settings.
• Fast Network: Shortcut to network settings.
• Wifi add: Add IP cameras into NVR channels wirelessly.
• Exit System: Logout, reboot, close screen output and shut down the system.

s System setup

Click right button>Choose System setup; you then shall enter the menu that enables you to do all settings related to this system.

Add Wireless IP Camera

antenna extension cord Antenna Extension Cord

Before leaving factory, NVR kit is already matched code, the image will come out when the kit is powered. If you need to add it again, Please delete the corresponding channel in the “Video Management” interface and add it as follows:

Step 1: Plug NVR and cameras to power, after NVR start, right click mouse -Wireless add–match-code interface, NVR will search camera under matching code model automatically.

Step 2: Wireless IP Camera has two kinds, including camera with RJ45 connector and camera without RJ45 connector, their way to match code as below: ® For camera with RJ45 connector, after start, use network cable to connect with NVR, match code automatically, no need to restore.

® For camera without RJ45 connector, after start, hold the bottom line of camera for 5 seconds to get into match code mode, it will match code automatically, no need connect network cable.

Step 3: When you can find IP address of camera on screen, matching code complete, click “Exit” to finish.

Notes: For camera without RJ45 connector, its process of getting into

matching code will last 10 minuets. After 10 minuets, please restore camera to get into matching code model again.

55 Split Screen ►

■RJ Video Manage O System Setup □□Video Playback H Video Backup C* Color Adjust

O PTZ Control

<’) Volume ► c° Setup Wizard

Fast Network

Wifi Add

(D Exit System

► Extend Wireless Range

Wireless connection is simple and convenient, but wireless is not a panacea! Because of the nature of wireless, decided in some complicated scenarios, there is a signal attenuation after passing through the obstacle.Following Some methods can circumvent obstacles and increase the signal transmission distance.

p Position the Antenna Correctly

As can be seen from the gain graph of the rod antenna below,The signal coverage of the antenna is similar to an apple. The antenna is located in the center of the apple and surrounds the antenna.The signal is strong, and the upper and lower ends of the antenna are recessed, and the signal is weak.

5dB 3dB

Rod antenna gain vs. coverage

According to the transmission characteristics of the antenna to the signal, in order to ensure the optimal image transmission effect of the wireless set, Claim:

ft NVR and IPC antennas should be placed in high places, not on the walls, metal, Obstructions such as glass affect the signal to diverge outward.

ft The antenna of IPC should be placed in parallel with the NVR antenna to maximize the respective radiation direction angles.In contrast, the maximum coverage of the signal is formed, as shown in the following figure.

Notes: When wireless signal is not strong enough against walls, users can take off the original antenna and subtitute antenna extension cord. Drill a hole on the wall to let the extension cord go through and simply put it where wireless signal is strong.

> set up cascading connection in a reasonable solution, extend wifi signal transfer distance

Note:

ft Repeater function can’t strengthen wireless signal for wireless NVR kit, but can

extend the distance by repeaters>wireless cameras.

ft Only when the repeater cameras and repeated cameras are positioned correctly, wireless distance will be extended.

ft Repeater function and 3 meters antenna extension cord are two methods to
extend wireless range. Users can choose one according to real situation.

> Repeater Setup

Step 1. Right click on NVR’S GUI, left click “video management”^ then left click “repeater”

Step 2. Add repeater

As picture shown below, click icon + besides channel 3, choose other channel.

Step 3. As picture shown below, it means IPC1 is connected to NVR through IPC2 and IPC3. IPC2 is connected to NVR through IPC3. IPC3 is connected to NVR directly.

Step 4. Click “Apply” and then click “refresh” to check if the setting is successful.

IPCAM2

IPCAM1

► Warning

Notes:

Device will not in guarantee if caused by below reason: O Accident;negligence;disaster;mis-operation.

1. Do not conform to the environment and conditions,such as power improper,working temperature too hight or too low, lightning stroke.ect.
2. Ever be maintained by other center which not belong to the real factory.

0 Goods already sold more than 12 months.

FCC RADIATION NORM

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.

FCC Compliance Statement

These limits are designed to provide reasonable protection against frequency interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed or used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in television reception, which can be determined by turning the equipment off and on. The user is encouraged to try and correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

CAUTION!

CAUTION!

The Federal Communications Commission warns the user that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested andfound to comply with the limits for a ClassB digital device, pursuant to part 15 of theFCC Rules. These limits are designed to providereasonable protection against harmfulinterference in a residential installation. This equipment generates,uses and can radiateradio frequency energy and, if not installedand used in accordance with the instructions,may cause harmful interference to radio communications. However, there isno guarantee that interference will not occurin a particular installation. If this equipmentdoes cause harmful interference toradio or television reception, which can bedetermined by turning the equipment off andon, the user is encouraged to try to correctthe interference by one or more of the followingmeasures: —Reorient or relocate the receiving antenna.

—Increase the separation between the equipmentand receiver.

—Connect the equipment into an outlet on acircuit different from that to which the receiveris connected.

—Consult the dealer or an experienced radio/TV technician for help.

<p>The post Wi-Fi NVR Kits User Manual first appeared on NVR IPCAMERA SECURITY.</p>

<p>The post ONVIF Camera Discovery and Stream Troubleshooting Guide first appeared on NVR IPCAMERA SECURITY.</p>

Overview; This article provides the most common causes for issues related to playing or downloading a UniFi Video Troubleshooting recording. Please check each section carefully and compare it with your setup before moving on to the next section.

Camera Recording Mode not Configured

Back to Top

In UniFi Video, cameras must first be configured to either Always Record or Record Only Motion mode before recordings will be generated. You can view the recording mode in the Camera page of UniFi Video.

To change the recording mode:

1. Log in to the UniFi Video Controller and go to the Cameras section.
2. Open a camera’s Properties pane by clicking on the camera.
3. Click on the Recording tab.
4. Under the Configuration section, in the Record Mode dropdown, choose either Always Record or Record Only Motion, then click Save.

If Schedules are in use, verify the Schedule configuration is appropriate. You may also need to verify that the time zone is set correctly under Settings > Time & Date, and that the NVR has sufficient internet access to be able to update its time via NTP.

Inadequate Motion Sensitivity Settings

Back to Top

If Record Only Motion is selected, make sure that the Motion Sensitivity settings are configured in a manner adequate for the scene that is being monitored. To configure Motion Sensitivity:

1. Log in to the UniFi Video Controller and go to the Cameras section.
2. Open a camera’s Properties pane by clicking on the camera.
3. Click on the Recording tab.
4. Under the Motion Detection section (click to expand), click the Configure button in the Zones section.
5. In the Window that appears, verify that the motion detection zone covers the area you wish to monitor, and increase Sensitivity as needed until motion events are triggered reliably.

Remember to use the Test Zone functionality to test your settings, then click the Save button to store the changes.

Incorrect Recording Path

Back to Top

If the recording path is not set to a valid directory, UniFi Video will fail to store recordings. While the interface will validate that the path is correct during configuration, it is possible that the path may be incorrect after a configuration is restored from backup, or the filesystem has been changed at the OS level.

Verify that the recording path is correct under Settings > System Configuration > Recording Path.

User Tip:Remember that paths on Linux-based NVRs are case sensitive.

For reference, the default recording paths are:

• Windows Custom Installs: C:\ProgramData\unifi-video\data\videos
• Linux Custom Installs: /usr/lib/unifi-video/data/videos
• UVC-NVR / UVC-NVR-2TB: /srv/unifi-video/videos

Recording Path has Incorrect Permissions (Linux-Based NVRs)

On Linux-based NVRs, the unifi-video user and group must be correctly assigned to the target recording directory so that UniFi Video can store recordings. The user and group can be unexpectedly changed while mounting an external device, browsing the structure using software, or making configuration changes.

To correct the permissions, SSH into the NVR and issue the following commands to re-assign all permissions correctly. Be sure to change the path as necessary to reflect your environment. The chown command may take a significant amount of time depending on the number of recordings in storage.

sudo service unifi-video stop
sudo chown -R unifi-video:unifi-video /srv/unifi-video/videos
sudo service unifi-video start

In certain cases—particularly when using network attached storage, the permissions or ownership of the root directory of the mounted storage may change. To avoid this, create a subfolder to use as a recording target and assign the appropriate permissions.

External Storage Device is Not Mounted

If external storage is used as the recording target, such as an external hard drive connected via USB or a NAS appliance, it is possible that the device has unexpectedly become unmounted. In some cases, the storage may not successfully mount after the NVR is rebooted, or the device may become unavailable during operation due to a disconnect, network issue, or configuration change.

Access the storage path on the NVR via SSH or Windows Explorer as applicable, and verify that the expected storage size is available and the storage is correctly mounted with appropriate permissions. In certain scenarios it is possible that UniFi Video may be writing to the local mount path while the storage device is unmounted, effectively consuming storage on the root or C:\ drive and interfering with the mount process.

NOTE:Please note that external storage is outside of our official support scope. If you require further assistance with external storage, please consult our Community Forums.

System is in Emergency Shutdown State

If the available free space in the target recording directory is less than the Space to Keep Free setting, UniFi Video will enter Emergency Shutdown mode to maintain stability. In this mode, no new recordings will be stored to disk. Emergency Shutdown mode will be indicated as a log entry in server.log. To troubleshoot this issue:

1. Verify the video storage paths, as detailed above.
2. Verify that the Space to Keep Free storage retention settings are configured appropriately considering the size and configuration of your storage. Go to Settings > click the System Configuration button > Configure tab > Space to Keep Free and modify the slider accordingly. The UVC-NVR / UVC-NVR-2TB use a default setting of 10GB and 40GB respectfully.
3. Perform a Database Analysis, with Restore Recordings enabled. This feature can be accessed from Settings > System Configuration > Tools. Be sure to check Restore Recordings, then click Analyze. This is particularly important after restoring a configuration backup in order to import old recordings so they can be added to the purge rotation to free space.

If the Emergency Shutdown state persists, review the server.log and purge.log file for further entries that may describe the cause.

RAMDisk is Not Configured Correctly (Windows NVR)

If UniFi Video is unable to store inbound video segments to the temporary cache, recordings will not be processed. Verify that the RAMDisk has been correctly configured, is mounted with sufficient space (minimum 3GB), and that the path has been properly set in system.properties.

For more detailed information on the use of a Windows RAMDisk, see: UniFi Video – Using a RAMDisk as a UniFi Video Temporary Directory in Windows

Database is Inconsistent or Corrupt

In certain scenarios, a database that has inconsistent data may impede the NVR’s ability to process recordings. If all prior options have been exhausted, a database reset will restore the data and structure without losing vital configuration or prior recordings.

UniFi Video – Troubleshooting Cloud Connections

Overview

This article includes the most common issues that arise with UniFi Video connections done over the cloud. Cloud connections with UniFi Video are those done via https://video.ui.com/.

NVR Doesn’t Appear When Accessing Via Cloud

After logging in to https://video.ui.com, a prompt to Select NVR with a list of NVR options should appear. If an NVR is missing from that list, follow these steps:

NOTE:This only applies if for NVRs that have previously been adopted to Ubiquiti Cloud. Otherwise the appropriate step would be to click on Set Up New NVR.

Solution Steps

1. Log in to your UVC-NVR locally via its IP address. If you don’t know what the IP address of the NVR is, find it using the Ubiquiti Discovery Tool (Download Chrome App).
2. Verify that you are logged in with the email address of the Super Admin as seen in the Users section of the UniFi Video Controller.
3. Check to make sure the NVR is still adopted via the NVR UI in Settings.

Cannot Connect to NVR Via Cloud

After the NVR has been successfully adopted via video.ui.com, if the NVR is inaccessible via Cloud, determine the NVR has a red or green status icon in video.ui.com. The red or green status indicates whether or not the NVR is connected to the Ubiquiti cloud. Many times, even an NVR with a red (disconnected) status could still be fully functional, aside from the loss of Cloud access.

Solution Steps

Red Status. This means that your NVR is not reaching out to Cloud. Follow these steps to troubleshoot:

• Check the UI Status page to see if there is any issue on our side.
• Verify that the name of the NVR as shown in the UniFi Video Controller’s Settings matches how it appears in video.ui.com.
• If the NVR in question was restored from another UVC-NVR, it should be re-adopted. To do so, select the NVR that is inaccessible and click “Remove selected NVR”. Then proceed to re-adopt the NVR to the Cloud.
• Use this guide for best networking practices: UniFi-Video – Ports Used.

Green Status.

If your NVR has a green status, but you still cannot connect to your NVR, that means the the NVR is connected to Ubiquiti Cloud, but the device being used and the NVR can’t reach each other. See this guide for best networking practices: UniFi-Video – Ports Used to fix this issue.

Issues Adopting NVR to Cloud

Solution Steps

1. Make sure that all outbound Ports from the NVR are open and available, as per UniFi-Video – Ports Used.
2. This functionality makes use of some special features of ES6. It is recommended to use Google Chrome for best results.
3. Try clearing the browser cache and try an incognito window as well. Some browser extensions may interfere with this functionality.

UniFi Video – Troubleshooting Camera Disconnects

Overview

This article provides several possibilities to test when facing a camera that will disconnect for no apparent reason.

Introduction

UniFi Video cameras may disconnect from the NVR for a variety of reasons. Identifying whether the behavior affects specific cameras or all of them, whether the disconnects follow a pattern (such as disconnecting during sunset), or simply remain disconnected, will help identify the root cause of the issue.

Most importantly, consider if the camera disconnections warrant troubleshooting in the first place. Often camera disconnects can be triggered by changes made to the network, such as disconnecting a cable, restarting a switch, changing configurations, or even a power outage. Comparing the timestamp of the disconnect with the events and alerts from your UniFi Controller or network hardware may reveal the cause.

For cases where further investigation is required, this article discusses the common causes for camera disconnects.

Faulty Cable Infrastructure

Faulty wired infrastructure may cause unpredictable behavior, including camera disconnects or random reboots. Even though a camera may initially establish a network connection when first installed, a damaged or unreliable signal path can present problems that don’t become apparent until external factors such as interference, vibration, temperature fluctuations or further wear and tear affect the cabling.

The easiest way to quickly rule out wired infrastructure faults is to remove the camera from it’s installed location, and connect it using a short, known-good patch cable to the same switch that the NVR is connected. If the problem is resolved, then the issue is either related to the network hardware between your NVR and cameras (network switches, wireless links, etc), power related (as discussed below), or network cable related.

Problems caused by faulty network cabling are often seen in conjunction with:

• Long cable runs (exceeding the 100 meter maximum)
• Poor quality or damaged cable
• Faulty or incorrect RJ45 terminations
• Not using outdoor rated STP cable when appropriate
• ESD damage, due to improper grounding / shielding

Inadequate Power Supply

UniFi Cameras require a stable power supply in order to operate reliably. If the camera does not receive enough power, the camera may behave erratically causing disconnects.

A common symptom of a camera that doesn’t receive adequate power is when the device disconnects around sunset, as the camera will switch to night mode thus enabling the IR LEDs which more than double the power draw. Additionally, if a single power source is supplying multiple devices simultaneously, one or more devices may not boot properly after a cold start such as a power outage.

The power draw requirement for each camera model is documented in the product Data Sheet, which is downloadable in our Downloads page or at the bottom of each model’s page when navigating from our products page. Keep in mind that the cabling and associated infrastructure between the power source and the camera will generate resistance increasing the amount of power used and should be factored into the total wattage required from the power source. The length and quality of cable, quality of terminations, and additional in-line connections such as a patch panel should be considered.

To test if inadequate power is the root cause of camera disconnects, uninstall the camera from its mounting location and connect it to a suitable power supply such as a PoE switch or PoE injector using a short, known-good patch cable. Cover the light sensor typically located on the front of the camera in order to trigger a switch to night mode and turn on the IR LEDs or leave it overnight to go through a full 24 hour cycle.

If powering multiple devices off a PoE-IN switch such as a NanoSwitch, factor in the power draw of all connected devices, the power consumption of the switch itself, and estimate loss from cabling infrastructure. A NanoSwitch will typically require at least a 24V 1A PoE injector in order to power more than one camera or a camera and an airMAX radio.

If powering the cameras using a PoE switch, verify that the connected devices are not exceeding the total power budget available from the switch. A PoE switch should generally not be operated near its maximum power rating, as headroom should be allowed for the increased draw during startup.

If powering a camera using a PoE injector or an Instant 802.3af adapter, verify that the injector and adapter are adequate for the camera, and if necessary test using a different known-good injector or adapter. Instant 802.3af adapters in particular may work best if installed on the camera-side of the network cable, rather than at the switch.

Cabling infrastructure problems may also be a source of power related symptoms, and the troubleshooting steps from the previous section should be followed.

Unreliable Wireless Connection

If the camera is connected to the network via a wireless connection, as would be the case of a  G3-Micro, or when using external hardware like an airMAX radio as a client, verify that the wireless connection is stable enough to sustain the connection.

To help determine if the wireless connection is the cause for your disconnects, consider moving the camera or client radio within a few feet of the access point (AP). If the connection stabilizes, then the wireless connection needs to be addressed. Even if the connectivity issue persists, the wireless connection should still be investigated.

Factors that may cause frequent wireless disconnects include:

• Low wireless signal (SNR), as read either by the AP or the client (or camera)
• High interference (noise) caused by external sources, such as non-802.11 networks, machinery or appliances
• High wireless channel saturation, caused by high client density or nearby networks on the same channel

To improve the wireless connection, you can:

• Move the camera or the AP closer to each other, in order to reduce the distance and improve the wireless signal.
• Move the camera or the AP away from sources of interference, such as microwaves or cordless phone bases.
• Change the wireless network channel to one with lower utilization and fewer networks. You can use Ubiquiti’s WiFiman mobile application (available for iOS and Android) to identify channels with less networks, or UniFi’s built-in RF Environment scan.
• Install an additional AP closer to the camera on a separate channel, in order to reduce the wireless network load and improve the connection quality.

Please review the UniFi and airMAX Troubleshooting sections for further wireless help articles if necessary.

IP Address Conflicts

If the camera and another device on the network have the same IP address configured, it may cause the camera to frequently connect and disconnect. This will occur as the NVR will receive conflicting information as to what MAC address is associated with a specific IP address and as a result, NVR and camera traffic will be incorrectly routed to the wrong device.

• If the camera IP address has been manually configured, verify that the IP chosen is outside of the DHCP scope configured for the subnet on your router.
• Make sure that no other device on the network has been configured with the same IP address, either manually in the device configuration, or via a DHCP reservation (Static IP assignment) in the UniFi Controller or third-party router.

Inconsistent Camera Authentication or Configuration

Incorrect credentials, bad certificates, or other configuration related issues may cause connection failures and repeat disconnects from a camera. This is typically easily resolved by resetting and re-managing the camera:

1. In UniFi Video webUI, navigate to the Cameras section, and click on the corresponding camera to open the configuration pane.
2. Select the Manage tab and click Unmanage to expand the section. Click the Unmanage button and confirm.
   User Tip:In some browsers if there is another subsection expanded in the Manage tab, when you click on Unmanage it seems like nothing is happening. Collapse all other sections by clicking on them and try again.
3. In a new browser tab, open the camera’s web interface by browsing to the camera’s IP address as seen in the camera’s configuration pane.
4. Log into the camera interface using ubnt as the username. Depending on whether the camera was able to reconnect after it was unmanaged, the password may have been reset to ubnt, or you may need to use the Camera Password as configured in UniFi Video’s Settings page.
5. Take note of the network configuration settings if necessary, then proceed to factory reset the camera.
6. Once the reset is complete, re-manage the camera and verify configuration and connectivity.

Installation Environment

In rare circumstances, cameras that are installed in extreme conditions may experience overheating and become disconnected from the controller. Refer to the maximum environmental temperature rating for your camera model if the camera is installed in a high temperature location and relocate if necessary.

Low Bandwidth Warning

Overview

This article describes a few options to improve slow video streams which trigger the “Low Bandwidth” warning on the UniFi Video live view.

Introduction

Streaming is a very intense process for any machine. Even with newer and newer hardware, it is difficult to keep up with the demand for real time video in most use cases. This article includes a few pointers on what to check to determine the cause of the slow video stream(s) that triggers the Low Bandwidth warning in UniFi Video Live View.

This warning will appear if the client machine (i.e. computer where Live View is being used) is struggling to keep up with the demand for video decoding, or if the NVR hardware is slowing down due to some CPU intensive process. It does not necessarily mean the camera or NVR have low bandwidth.

ATTENTION:If you do not see the Low Bandwidth message like in the picture above, skip to step 2.

Step 1: Network Troubleshooting

In most cases the upload speed of one of the elements in the network is the culprit of triggering a Low Bandwidth warning. Always perform a thorough troubleshooting as described in this section first, before moving on to troubleshoot the camera.

Check the upload speed. Check the machine’s connection to the NVR—specifically the NVR’s effective upload speed. If the NVR is separated over the internet (WAN) then that network’s upload speed is a factor. You’ll need to make sure your network speed is up to the task. The following diagram shows a scenario where the UBNT cloud or port forwarding is being used to reach the NVR.

Notice the numbered connections from the camera all the way to the mobile, where a user is viewing the live video. Any one of these five connections could be the cause of the slow stream. In other words, the slowest upload speed of any of these will be the maximum speed available for the video stream.

In this second scenario, a local machine is used to view the video streams from the NVR, so the path from camera to user is shorter. Again, any of these connections can be the cause of low bandwidth. Check what the speed of each one is to determine if one of them is the cause. Typically, we find step 4 to be the culprit: make sure to check your WAN upload speed with your internet provider.

Step 2: Camera Troubleshooting

In the vast majority of cases, the Low Bandwidth warning is related to upload speeds and would become evident once the investigation mentioned in the section above is performed. In rare cases the issue will be related with the cameras. There are three ways this error could appear:

• On one camera stream
• On multiple camera streams
• On all camera streams

One Camera Stream

If symptoms only exhibit on one camera, it’s most likely a connection issue, or camera firmware issue. Try the following:

1. Reboot the camera.
2. Make sure the camera’s firmware is up to date.
3. Try swapping the camera’s ethernet cable, port, and uplink switch to cover all bases.

Multiple Camera Streams

1. If the same cameras present symptoms every time, it is likely a camera connection, or camera firmware issue. Try to establish a commonality between the cameras:

1.1 Are they on the same Switch? Test one of them on another switch or compatible POE injector.

1.2. Are they on another LAN? Make sure ports 7442 and 6666 are open to the NVR.

1.3. Are they on the same firmware? Try manually uploading a new firmware from our Downloads page on one of the cameras.

2. If symptoms appear on different cameras every time, it’s most likely a client-side processing issue. In other words, the computer used to view the video stream. To verify: open Task Manager (Windows) or the Activity Monitor app (macOS) and view the computer’s CPU usage.

You should be looking at the stats for the browser used to run UniFi Video. Mobile devices don’t always include a CPU monitor, you may have to install an app that functions as one. Alternatively, you can test on a computer to verify if the Low Bandwidth message appears, if it doesn’t, then the issue is with the mobile’s CPU is very probable that the phone’s CPU usage is at a very hione, or you can test the connection on a computer first to determine if the mobile’s speed is the problem.

All Camera Streams

In most cases this is indicative of a poor connection or a slow client-side CPU. Make sure to check the client’s CPU usage using the same instructions shown above, both before and after opening the video stream.

How to Reset a Camera to Factory Default Settings

Overview

There are two ways to reset your camera. The recommended method is to physically reset the device by using the reset button on the camera. Resetting via the WebUI is also possible in most cases. Find both processes described below.

Introduction

If you are unable to manage or otherwise configure a camera, it’s likely it will need to be reset back to factory settings. Once the reset has been completed, the camera login credentials should revert back to ‘ubnt’ for both the username and password.

Physical Reset

The reset button’s location will vary from model to model. Please check the camera’s Quick Start Guide to find its specific location. QSGs can be found in the Downloads page. Use a paper clip or a similar object to push the button within the small reset hole.

1. While the camera is powered on, press and hold the reset button for 10 seconds.
2. Release the button (the LEDs will stop glowing).
3. Do not disconnect the camera from its power source during the reboot process.
4. The camera will restore factory settings after a few minutes.

Camera WebUI Reset

Although the physical reset is the recommended method of taking your camera back to factory defaults, sometimes a WebUI reset can be more convenient. Find the camera’s IP address via WiFiman, or UniFi Video and then follow the steps below:

1. Connect to the camera’s IP address in your browser, and log in.
2. Go into the System tab.
3. Under the Maintenance section you will see the link for Reset to Defaults.
4. Click it and wait for your camera to be reset. Don’t unplug the device during this process.

How to Factory Reset an NVR Appliance

Overview

Read Next : Ubiquiti Unifi Cameras Firmware Software Download

This article explains how to reset an NVR Appliance to its original factory settings.

NOTES & REQUIREMENTS:

• The following guide is based on UniFi Video version 3.1.x and later.
• Factory resetting an NVR will remove all previous management settings and video data. Any custom configuration changes applied by the system administrator will be lost, such as file-systems mounted on iSCSI volumes or locally attached external disk drives.
• The default IP address of the NVR appliance is 192.168.1.30 (but will retrieve a DHCP-assigned address if a DHCP server is present).

Introduction

There are three methods to factory reset your NVR: via Graphical User Interface, Command Line Interface, or the reset button on the actual device. After resetting your NVR to factory defaults, please follow this article to bring it back to current firmware: UniFi Video – How to Update the NVR via SSH.

Graphical User Interface (GUI)

1. Open the NVR landing page in a browser (http://<NVR_APPLIANCE_IP>/). You do not need to include the default port “7443” as the NVR hardware itself is what will be managed, not UniFi Video.
   
2. Click on the gear icon on the upper right hand corner of the page to access the Configure Device page.
3. Log in as “root” system account (username/password should be either ubnt/ubnt or root/ubnt). If you’ve changed this password, and don’t have it anymore, proceed to the Hard (physical) reset method.
4. Navigate to the Maintenance tab.
5. Click “Reset to Defaults” button next to “Reset To Factory Defaults:”
   
6. Re-open the NVR landing page in a browser (http://<NVR_APPLIANCE_IP>/).

Command Line Interface (CLI)

1. Open a shell session to the NVR appliance e.g. ssh root@<NVR_APPLIANCE_IP>
2. Enter the following command-line
   nvr-systool reset2defaults
3. Re-open the NVR landing page in a browser (http://<NVR_APPLIANCE_IP>/).

For more options, type nvr-systool --help to list other administrative parameters. The nvr-systool is used by the NVR management console where this CLI approach is equivalent to the GUI steps.

Hard (Physical) Reset

1. Press and hold the Reset button (the crescent moon button) located below the Power button for 10+ seconds. The device will take up to 60+ seconds to restore the default configuration and return to the original factory version.
2. Re-open the NVR landing page in a browser (http://<NVR_APPLIANCE_IP>/).

UVC-Micro/G3-Micro Recovery

Overview

This article demonstrates how to recover a UVC-Micro and UVC-G3-Micro.

Introduction

The methods described in this article are comparable to a TFTP recovery done on a UVC, UVC-Dome, or UAP for example. The difference is that the UVC-Micro does not have an Ethernet interface, therefore, there is no direct way to interface with the unit via TFTP. Instead, the UVC-Micro makes use of the SD-Card slot on the back of the unit. In the case of the UVC-G3-Micro, on-board storage is used instead.

Steps: UVC-G3-Micro Recovery

1. Disconnect power from the UVC-Micro.
2. Insert a paperclip or similarly narrow object in to the reset hole on the opposing side of the LED and press down.
3. Continue holding this button while you apply power to the UVC-Micro. The LED will turn on and remain steady.
   User Tip:Hold the camera in one hand, and the paperclip pressing the button in the other. Have the magnetic base on a flat surface with the power adapter connected to the base. Slowly lower the camera over the base. The magnet will snap on, applying power. Be careful not to release the button.
4. After approximately 15-20 seconds, the LED will flash once. This is the indicator that the reset button may be released.
5. After an additional 30 seconds or so, the UVC-Micro will start emitting a tone indicating that the camera is in a default state and is ready to be provisioned.

Steps: UVC-Micro Recovery

NOTES & REQUIREMENTS:

If performing this recovery with a Windows computer, it will be necessary to download and install Win32 Disk Imager (Free). The firmware binary can be obtained from the firmware downloads page, or the Video Controller in the following places:

• Windows: C:\ProgramData\unifi-video\fw\A5S\
• Linux: /usr/lib/unifi-video/fw/A5S/

*The filename has been intentionally omitted as it will change depending on the software installed. There will be only one file in this folder.

1. Insert a microSD card (20MB or larger).
   WARNING:Contents will be overwritten. Please back up any contents that you wish to retain.
2. Write the firmware file to the microSD card. For Windows, see Note 1 below. For Linux & Mac, see Note 2 below.
   1. If using Windows follow this process:If using Windows, copy the .bin file to the same folder, then rename the copied .bin to have an extension of .img instead of .bin. Use Win32 Disk Imager to write the image to the drive letter of the microSD card.  Your result should look like this:

      

      Where:

      D:/Downloads/UVC.gen2.v3.1.0.38-devel.89002e2.150421.2034.img would be a firmware binary renamed to have a .img file extension

      [I:\] is the drive letter assigned to this microSD card by Windows. Then, all that is left is to click the Write button.

   2. If using Linux or Mac OS X follow this process:If using Mac or Linux, the dd command is used:

      dd if=/path/to/firmware/file.bin of=/path/to/microsd/card bs=8M; sync

      Root privileges may be required to be able to use dd. If this is the case, issue the following command prior to the dd command:

      sudo su -

      To find the path to your microSD card (what follows the “of=” part in the command above), you can use diskutil (Mac) or dmesg or fdisk (Linux).  Here are options for both Mac and Linux.

3. Unmount and remove the microSD card from the computer.
4. Disconnect power from the UVC-Micro.
5. Insert the microSD card into the spring-loaded slot in the back of the UVC-Micro.
6. Insert a paperclip or similarly narrow object in to the reset hole on the opposing side of the LED and press down.
7. Continue holding the reset button while you apply power to the UVC-Micro. The LED will turn on and remain steady.
   User Tip:Hold the camera in one hand, and the paperclip pressing the button in the other. Have the magnetic base on a flat surface with the power adapter connected to the base. Slowly lower the camera over the base. The magnet will snap on, applying power. Be careful not to release the button.
8. After approximately 15-20 seconds, the LED will flash once. This is the indicator that the reset button may be released.
9. After an additional 30 seconds or so, the camera will start emitting a tone indicating that it’s in a default state and is ready to be provisioned.
10. To reuse the microSD card, insert it back into the computer and reformat it.

How to Adopt a Remote Camera that is not Displaying in the NVR

Overview

This article helps troubleshoot a remote camera that is not appearing in UniFi Video.

NOTES & REQUIREMENTS:

• This procedure is not necessaryif all devices are on the same Layer 2 Network, or Broadcast domain.
• UniFi Video v3.1.5 is the last version that supports airCam models.

Introduction

This article is useful if your cameras are on a different network than your NVR, or are otherwise not appearing in your NVR’s camera list. There are two methods to adopt directly, Manual adoption, or Token Adoption. Token adoption is faster than Manual Adoption, especially when configuring multiple cameras.

Steps: Manual Adoption

1. Navigate to the camera’s web interface by entering its IP address in the browser.
2. The default username and password is ubnt/ubnt. (If unsuccessful try root/ubnt)
3. Enter the IP address of the NVR in the UniFi Video server field.

5. Click Save Changes at the bottom of the page.

6. Return to the NVR web interface by entering the NVR’s IP address in the browser.

7. On the Cameras view, enable the Unmanaged filter and locate the camera.

8. Proceed to adopt the camera.

Steps: Token Adoption

1. Navigate to the NVR’s Settings page.
2. If the Camera Adoption Token field is empty, click NEW TOKEN.
   ATTENTION:The token is only valid for 30 minutes, it will then disappear.
3. Navigate to the camera’s web interface by entering its IP address in the browser.
4. Enter the IP address of the NVR in the UniFi Video server field.
5. Enter the Adoption Token in the  Adoption Token field.
6. Click SAVE CHANGES. The Camera will automatically be adopted to your NVR.

How to Reset a UniFi Video Installation for Windows

Overview

This article will outline how to reset a UniFi Video installation and how to restore recordings under the Windows operating system. The article for resetting a Linux installation (or our hardware NVR), can be found here.

NOTES & REQUIREMENTS:

Please note that this will clear out all settings and managed cameras but therecordings will remain. If you do not restore a configuration backup, it will be necessary to re-manage the cameras, set up motion zones/sensitivities, reconnect the install to the cloud, etc. This method should only be used after a database repair has been attempted and been advised by a Ubiquiti employee.

cp /path/to/firmware.bin ~/

tftp 192.168.1.20; bin; put ~/firmware.bin

<p>The post UniFi Video Troubleshooting first appeared on NVR IPCAMERA SECURITY.</p>

Applies to Models: XRN(410, 810, 1610, 2010, 2011, 3010), QRN(410, 810, 1610), PRN-4011, Some SRN series

Summary:

These instructions are for configuring Motion Detection-based recording on Hanwha non-VMS-based NVRs. They are commonly known as “Embedded NVRs” because their user interface is locked and not running on top of Linux or Windows. 

NOTE: The instructions in this article are performed on the web-based management console of
the NVR, the menu layout when performing this directly from the NVR is identical

Step By Step Guide:

1. To connect to the NVR via Chrome, enter the NVRs local IP address into Chrome and press enter

2. The NVR requires a login; you will need to provide the password for the “admin” account

3. The NVR will default to Channel 1 Live View, click on the three horizontal lines in the top left, and select Setup (Figure 1)

Figure 1

4. Go to Record>Recording Schedule (Figure 2)

5. Click Event or Both (Figure 2) as the scheduling type. “Event” only records motion events; “Both” keeps all recordings but marks the motion events

6. Click  the All button shown in the top left of the scheduling grid; this copies the setting to the entire grid (Figure 2)

7. Click Apply to CH (Figure 2). Select all of the camera(s) you wish to apply this schedule to, click OK

8. Click the OK button at the bottom of the Record Schedule screen; this finalizes all changes

Figure 2

9. Navigate to Event>Camera Event (Figure 3)

10. Click on the column header for Camera Event; this allows you to change the entire column to the On setting (Figure 3)

11. Click the column header for MD, and change it to the On setting (Figure 3)

Figure 3

12. Click the OK button at the bottom of the screen to save the changes (Figure 4)

Figure 4

13. Click Camera MD/VA Setup (Figure 5)

NOTE: In the NVR user interface, this button is sometimes shown as Motion Setup, Motion, or 
IVA Setup

Figure 5

14. Click the MD check box in the Camera MD/VA Setup screen (Figure 6)

Figure 6

15. If the camera is mounted higher than 12 to 15 feet, you may need to click on the GREEN min box and draw a smaller min box on the camera view screen (Figure 7)

NOTE: At greater heights, a human may be smaller than the default min box

Figure 7

16. Click the Event Zone to Detection Area (Figure 8)

17. Click on the rectangle, then draw a box on the preview window (Figure 8)

Figure 8

18. If the DA counter under the camera preview is at zero, you have not drawn a Detection Area  yet (Figure 9)

NOTE: As shown in Figure 9, you can have eight detection areas.

19. In most instances, you do not have to touch Detection Level or Sensitivity

Figure 9

20. Click OK to save your changes (Figure 10)

Figure 10

21. Click on the Channel Dropdown menu, and repeat steps 13 through 20 for all cameras you wish to set up motion detection for (Figure 11)

Figure 11

22. Once you have completed the Detection Area set up for all of your cameras. Make sure to click OK on the Camera Event screen to save your changes (Figure 12)

Figure 12

How do I register cameras Using the Auto Detect function?

In an effort to maintain standards, Hanwha Techwin America uses the web UI for 
all knowledge base articles pertaining to product configuration. Open Chrome,
enter the IP Address of your device into the URL bar, and press enter. 
If you are not using the web UI to configure your device, please refer to the
user manual for your product.

NOTE: The Auto Detect function may sometimes find third-party devices, do not add
any third party devices using the Auto Detect feature uses the Wisenet Protocol, not ONVIF

NOTE: The root login username for Hanwha cameras is: admin (all lowercase),
the password gets set by the installer by entering 4321 into the password
box, you are telling the application there is no password set

<p>The post How do I enable Motion Detection for Hanwha cameras first appeared on NVR IPCAMERA SECURITY.</p>

What is CCTV Camera Software for PC?

The Software for PC is designed and developed by the CCTV camera manufacturers for their security solutions and products. This helps to connect as well as control the CCTV cameras on PC. Here we provide you with the top 25 CCTV Cameras Software for PC.

Application of these CMS

These CMS allows users to connect and maintain the CCTV system with your PC. With these applications, it becomes easier to get the live view of your residence, family, office premises and locality. With these applications, You can access the CCTV from remote locations as well.

it is now easier to connect and maintain on your security online through CCTV cameras. CCTV cameras are the best security solution to enhance the security of family members and others.

Importance of the CMS

These CMS helps to connect as well as control the CCTV cameras on PC. These CMS acts as an intermediary between PC and CCTV camera set up to help the user client to provide access to the user of CCTV camera on PC. We will highlight some of the important functions which can be performed by the application.

• Remote Access.
• Connectivity and control
• Video Surveillance.
• CCTV Video recording.
• Live monitoring on a different viewpoint.
• PTZ camera controlling.
• Remote playback of the recording.

List of Top 25 CCTV Camera Software for PC

Here we will discuss in detail about the application for PC. We provide you with the top 25 CMS. CCTV cameras are available for Windows and Mac operating systems. But some CCTV manufacturers do not provide the application for Mac user clients.

The download file of every CMS is in the compressed format and use WinRAR to extract the downloaded file. Besides, get better knowledge regarding the CMS installation and setup procedure by clicking the links.

The list of the best CMS is as follows:

1. IVMS 4500 by Hikvision

IVMS is also one of the best CMS developed by Hikvision Company. This CMS is the best application in the market to connect as well as control.

Hikvision is a global leader in the provider of security solutions and products. Emphasizing on the comprehensive and highly skilled R&D team, Hikvision manufactures a wide range of products. Hikvision has broadened its field to smart home tech, industrial automation, and automotive electronics industries to realise its long-term goal.

Hikvision products also render powerful business intelligence for clients, which enables more efficient transactions and greater commercial profit. Hikvision is a global leader of IoT solution provider with video as its core competency. Hikvision now has above 19,000 R&D engineers. The company yearly funds over 9% of its annual sales revenue to research and development for continued product innovation.

IVMS 4200 & Storage Server

The application is provided by the Hikvision company. The free download link is provided below. IVMS 4200 installation procedure is here as well, click on the link of IVMS 4200. Also, read the instruction of IVMS 4200 storage server as well.

Download IVMS 4200 For PC (Windows) V3.1.1.13

IVMS 4200 For PC (Windows) Download VS V1.0.0.13

Free Download IVMS 4200 AC V1 For PC  AC V1.0.1.13

Download Multi lang.  IVMS 4200 For PC  Multilingual Package V3.1.1

IVMS 4200 For PC Multilanguage for PC   Multilingual Package AC V1.0.1

Multi-language VS V1  IVMS 4200 For PC   Multilingual Package VS V1.0.0

Free Download IVMS 4200 for PC (MAC)   MAC V2.0.0.10

Download IVMS 4200 Storage Server for MAC

Download IVMS 4200 Storage Server for Windows

IVMS 4500

We have provided you with the IVMS 4500 for PC free download link below. Get the free download link. Read the installation procedure of IVMS 4500 here.

Download IVMS 4500 For PC (Windows)

Download IVMS 4500 for PC (MAC)

2. Smart PSS by Dahua

We provide you here with the Smart PSS by the Dahua Company. The Smart PSS helps connect the CCTV cameras on your PC. The CMS has many features and functions to help the user to connect, live stream, PTZ control, etc.

Zhejiang Dahua Technology Company is a leading company in video-centric smart IoT products and service provider. Dahua Technology Company renders end-to-end security solutions, products, and services to create values for city operations, corporate management, and clients.

Dahua solutions, products, and services are in over 180 countries and regions. Dahua Technology has 54 subsidiaries companies and branch offices globally in Asia, the Americas, Europe, Middle East, Oceania, and Africa.

Smart PSS

Here is the free download link of Smart PSS for Windows and Mac OS. Also, read the instruction of installation procedure in the article of Smart PSS.

Smart PSS For PC Free Download (Windows)

Smart PSS For Mac Free Download

3. NVMS 1000 by TVT

NVMS is one of the famous application developed for the TVT CCTV camera brand. This application provides you with many features to administer your CCTV camera on PC. The CMS is a free download here, through this you can get the following features:

• Remote Access
• PTZ Control
• Live stream
• Recording videos

TVT brand of CCTV camera is manufactured and distributed by the Shenzhen TVT Digital Technology Company established in 2004 and headquarter in Shenzhen, also listed on the SME board of Shenzhen stock exchange in December 2016.

As a worldwide best quality security solutions and products provider in more than 120 countries apart from China. Ranking as the most advanced company that enters into the abroad market in the video monitoring industry in China, TVT has established an independent and perfect marketing service system.

NVMS 1000

Here is the download link for NVMS 1000 for Windows and Mac OS. You can read about the installation procedure as well by clicking on the link of NVMS 1000.

NVMS 1000 for Windows 10

NVMS 1000 for Windows 10

NVMS 1000 for Mac OS

NVMS 7000

Get the free download as well as free installation procedure on NVMS 7000. This is available for Windows and Mac OS.

Free Download NVMS 7000 for PC (Windows)

NVMS 7000 for MAC Download Free

NVMS 2.1

We provide the latest application provided by the TVT known as NVMS 2.1 for Windows OS. This CMS is only available for the Windows operating system. Read the installation procedure of NVMS 2.1 here.

NVMS Lite 2.1 Download Free

4. KVMS Pro by CP PLUS

We provide you here KVMS provided by the CP Plus Company. KVMS Pro provides you with a wide range of functions and features as well. With this, you can connect CP Plus CCTV camera setup with the application on Windows and Mac.

CP PLUS is the global leader in high-level security and surveillance solution. Inspired by the vision and commitment to make surveillance easy and affordable, CP PLUS has begun a mission to make the world a safe and secure community.

As per the IHS Survey 2017, CP PLUS attains as the most recent and most active brand to enrol the club of Top 4 security companies in the world and Top 2 in Asia. CP PLUS attribute their path-breaking success to sound R&D leadership. CP PLUS products pass through stringent quality-control tests and are globally certified by the certificates such as UL, CE, FCC, etc.

KVMS Pro

Here is the CMS of KVMS Pro free download link for Windows and Mac OS. Read the instruction of installation procedure to install the KVMS Pro here.

Free Download KVMS Pro for PC (Orange)

Free Download KVMS Pro for PC (Blank)

Free Download Indigo CVMS for Mac

Indigo IVMS for Mac Free Download Free

5. EZStation by Uniview

Here we are about to discuss the EZStation developed by the Uniview. With this, you can connect as well as perform other functions to control the CCTV camera on your PC. With this, you can get many features such as live view, audio-video recording, etc.

Uniview is the global leader of IP video surveillance. First-ever company to introduce IP video surveillance in China, Uniview is the third-largest player in the video surveillance industry of China. In the year 2018, Uniview has the 4th largest global market share in the surveillance industry.

Uniview has a wide range of IP video surveillance products ranges from IP cameras, NVR, Encoder, Decoder, CMS Client, and app, covering several markets sectors including retail, building, industry, education, commercial, and city surveillance.

EZStation

Get here the download links of EZStation as well as the installation procedure of EZStation.

EZStation for PC (Windows 32 Bit)

EZStation for PC (Windows 64 Bit)

Download EZStation for MAC

6. Guard Station by Uniview

Guard Station is also another applicaton provided by the Uniview Technology Company. This CMS provides you with a variety of software to connect as well as control the Uniview CCTV cameras. This app provides functions such as PTZ Control, live streaming, video recording etc.

Guard Station

Here is the free download link of Guard Station for Windows and Mac OS. For the process to install the Guard Station read here.

Guard Station Software Download for Windows

Guard Station For MAC

7. Wansview Cloud by Wansview

Here we provide you with the Wansview Cloud which is designed and developed by the Shenzhen Wansview Technology company. It provides you with the capability to monitor your premises from remote locations on your PC. Wansview App for PC helps to connect as well as control the CCTV cameras.

Established in 2009, Wansview dedicated to product design, development technology innovation, and professional manufacturing processes in the field of security solutions and products. Wansview has clients in more than 100 countries in the world, such as the United States, Germany, Britain, France, Canada, Spain, Italy, Russia, Brazil, etc.

Wansview Cloud

We provide with the free download of the Wansview Cloud for Windows and Mac as well as the installation method.

Free Download Wansview APP for PC (V1.0.2)

Wansview APP for PC Free Download (V1.0.3)

Download Wansview APP for MAC Free(V1.0.3)

8. MI Home by Xiaomi

Here we provide the MI Home for PC to connect the Xiaomi’s MI Home CCTV cameras. This CMS is only available for Windows and Mac OS. The application provides remote access, live view and connectivity at any kind of network.

Xiaomi Inc. is a China-based company which deals in electronics and security products. This company has been taken good care of its clients and has a greater market share by providing the product at affordable prices.

MI Home

Now get the free download of MI Home for Windows OS. Also, read the instruction to install the MI Home on Windows.

MI Home Security Camera App Download For PC

9. V380 CMS By V380 Camera

We provide you with the free download of V380 which is designed and developed by the V380 Camera. V380 software helps you to connect the V380 CCTV cameras and helps to maintain surveillance over the home, locality and office premises. The app is available only in Windows OS.

V380 Camera is a most-advance company that engages in R&D, production, marketing, and service of the V380 Wifi Smart Camera, V380 IP Camera, and V380 360 Panasonic Camera. V380 Camera is one wifi camera brand in the company which aids to create intelligent terminal products.

V380 Software

Get the free download of V380 for Windows OS. Also, read the installation instruction of V380 software here.

Download V380 App for PC

10. PVMS By Panasonic

Here we will discuss the PVMS software developed by Panasonic Company. PVMS is one of the best CMS provided by the Panasonic Company. This is available only for the Windows operating system, this application helps to connect the CCTV cameras, provide remote playback, System configuration and video intercom.

Panasonic is a Japanese company established in 1935, with more than 259,000 employees. Panasonic deals with different kind of CCTV cameras and software. Panasonic has been one of the largest electronic appliances manufacturer in many countries.

PVMS software

The free download link of PVMS is available here. Also, get the installation guide by visit the article of PVMS.

Free PVMS Download for PC

11. Idmss Lite by Dahua

Idmss Lite software is also provided by the Dahua Technology company. Idmss Lite for PC is available for free download. The performs various functions such as live streaming, PTZ control, playback video, record video, snapshots, etc.

Idmss Lite

We have provided the instruction of installation in detail in the link of Idmss Lite here.

Free Download Idmss lite for PC

Free Download Idmss lite for Mac

12. DMSS by Dahua

Get here the DMSS by Dahua Technology Company. DMSS is the mobile application provided by the Dahua Company. This app is available for Windows and Mac user client, this CMS provides the user access to their Dahua CCTV cameras.

DMSS

Here is the free download of the DMSS as well as the procedure to install the DMSS software.

Free DMSS  for Windows 7/8/10 Download

Free DMSS for MAC Download

13. EZVIZ App by Uniview

EZVIZ App is also another application designed and developed by the Uniview Technology Company. This CMS helps to connect the as well as provides multilingual support to the users. This software is available for Windows as well as Mac OS.

EZVIZ App

Download free and also read about the installation procedure of EZVIZ App here.

Download Ezviz App For PC Windows 7/8/10

Download Ezviz App Video Plugin  Windows

Download Ezviz App Video Plugin

14. Velocity by HiFocus

HiFocus CMS is designed and developed by HiFocus Electrovision Company for its security solutions and products. HiFocus CMS helps to connect as well as control the CCTV cameras on your PC. HiFocus CMS for PC is the best security solution provided for the HiFocus CCTV system in the market.

Hi-Focus aims to bring the most advanced CCTV surveillance systems that can combine high volumes of data to produce essential information. The system provides users with advanced scrutiny, analysis, interpretation, and management. HiFocus assistance helps in the deployment of fast and intelligent security system solutions through a complete analysis based on the position and location of the device.

India’s trusted CCTV Company, Hi-Focus provides its customers with the best end-to-end video analytics solutions with the best surveillance cameras accompanying integrative proficiency to understand customer’s behaviour and other essential operational indices.

Velocity

Here is the free download of Velocity by the HiFocus, also read the installation procedure of Velocity.

Free Download Hifocus CMS Software for PC

Hifocus CMS Software for MAC Free Download

15. Smart Viewer By Hanwha (Samsung)

Hanwha Security Company has developed the Smart Viewer to connect the Hanwha CCTV cameras. The CMS provides you up to 72 channel of CCTV cameras view on screen, search recorded data by event type and date, export video and dual monitor support.

Hanwha Techwin America (Samsung Techwin) is a security technology company that has exhibited stable growth for the past 40 years and is part of the Hanwha Group. Hanwha Techwin is a Fortune 500 company and also one of the conglomerates in South Korea considered to be the largest.

The Hanwha Group has the expertise of over 60 years in the manufacturing of the video surveillance industry. The company has created many clients across the globe by providing the best quality product and services.

Smart Viewer

The link to download the Smart Viewer is free here. And visit the installation procedure article of Smart Viewer.

Download Smart Viewer For PC (Windows)

Download Smart Viewer For MAC

16. Wiseview by Hanwha (Samsung)

There is another software also to connect the Hanwha CCTV cameras also known as Wiseview. This provides you with some features as dual-screen assistance, live streaming, log administration, and user management.

Wiseview

Get the download of the Wiseview for free and installation guidelines as well.

Free Download Wiseview for PC (Windows)

Wiseview for MAC Free Download Free

17. Night Owl Connect By Night Owl

Night Owl Connect is designed and developed by the Night Owl Company for Night Owl CCTV cameras. This software has features such as IP device configuration, group management, main preview and log search functions. This feature helps the user to connect the CCTV cameras.

Night Owl Security Company is a leading innovator in the security technology industry. It is the fastest-growing manufacturer of security solution and products which offers the best value on the market. This is accomplished by designing and engineering products that are of high quality, user friendly, and affordable.

Night Owl Connect

Download free Night Owl Connect software for Windows and Mac OS. Read the guidelines for installation of Night Owl Connect.

Download Night Owl Connect for PC (Windows)

Download Night Owl Connect for MAC

18. Guarding Vision

Here is the Guarding Vision for PC developed by the Guarding Expert. This CMS helps us to connect as well as control the CCTV cameras on PC. This provides you ability to connect multiple CCTV camera brand on the same software. This application is available for Windows and Mac operating system. Guarding Vision helps us to detect motion as well.

Guarding Vision

Now download free Guarding Vision for Windows and Mac as well as learn about the installation procedure.

Free Download Guarding Vision for PC (Windows)

Guarding Vision for MAC Download Free

19. HiP2P Client by Dericam

Here we provide you with the HiP2P Client software for connecting and administering the Dericam CCTV cameras for PC. HiP2P Client is available for Windows and Mac user clients, this provides you with the ability to control Dericam CCTV cameras on PC.

Shenzhen Dericam Technology Company was formed and established in the year 2010. The company is developing, manufacturing, and marketing IP cameras and storage devices for home security field. Currently, Dericam has clients in the US, Australia, Netherlands, France, Poland, and other countries as well.

Dericam aims to innovate and develop its products to meet the demands of customers. Dericam continues to innovate and develop the quality of its products, enable everyone to enjoy the benefit of advanced technology. All series of products are CE & FCC certified.

HiP2P Client

Here get the download of HiP2P Client for free and read carefully the installation method of HiP2P Client.

HiP2P Client Software Download Free

HiP2P Client Software Download For MAC

20. YI IoT By YI Technology

Here we will discuss in detail about the YI IoT software which is designed and developed by the YI Technology Inc. YI IoT software helps you to connect the YI IoT camera and YI Dome Camera on your PC. This software provides you with cloud encryption and real-time push notification alerts. This is only available for Windows OS only.

YI Technology strives to deliver enhanced security and productivity to clients globally through high-quality hardware and cutting-edge. YI Technology is committed to rendering users with convenient and affordable technology emphasizing the latest and greatest Edge Computing features as well as highly advanced AI algorithms.

YI Technology develops and manufactures intelligent video and imaging solutions using the latest technology to solve real problems for its clients. YI Technology values its clients’ security and privacy and employs a 128bit end-to-end encryption to keep clients data safe.

YI IoT

Here get the free download now of the  YI IoT as well as the installation method for Windows OS.

Free Download YI IoT App for PC

21. YI Home By YI Technology

Here is another software developed by YI Technology known as YI Home. This also helps to connect as well as control the YI Home and YI Dome cameras on PC. This provides various features which are similar to YI IoT.

YI Home

Get the YI Home free download link and installation procedure guidelines.

Free Download YI Home App for PC (Windows)

YI Home App for Mac Free Download

22. DW VMAX By Digital Watchdog

Let us learn about the DW VMAX software which developed by the Digital Watchdog a leading CCTV camera manufacturing company. The DW VMAX is available for Windows, Mac and Linux OS. The has features such as PTZ control, live image quality enhancement, zoom in and out option on live streaming, multiple as well as single video export, 4/6/8/16 or 32 Channel view on PC and audio communication.

Digital Watchdog (DW) is a leader in surveillance cameras and associated video management, delivering complete video surveillance solutions for HD over Coax and HD IP CCTV systems of any size and for any application.

DW VMAX

Get the free download of DW VMAX for Windows, Mac and Linux OS here, read the installation procedure correctly of DW VMAX.

Free Download DW VMAX for PC Windows x64(Version – 4.1.0.31401)

DW VMAX For MAC Download Free x64(Version – 4.1.0.31401)

Download DW VMAX For Linux Free x64(Version – 4.1.0.31401)

23. CloudSEE by Jovision

We provide you with CloudSEE developed by the Jovision Technology Company. CloudSEE helps to connect the Jovision CCTV cameras. This provides video recording on a live camera, play recorded videos., assistance real-time playback when preview, playback supports quick, slow, and by frame modes, local snapshots, and recordings and files stored locally.

Jovision Technology Company established in the year 2000, is the world’s preeminent manufacturer and distributor of video surveillance products and solutions. Jovision is recognised in developing and manufacturing highly advanced video surveillance products.

Following are the new main researched and developed product of Jovision Company, smart IP cameras, WiFi cameras, NVR, DVR, HD Analog cameras, CMS video management software, alarm systems, encoders, decoders, and CCTV modules. Jovision’s expert engineers also provide customized security solutions.

CloudSEE

Here is the free download of CloudSEE for Windows OS because the CMS is only available for Windows OS. Also, read the installation procedure carefully of CloudSEE.

Free Download CloudSEE For PC

24. SwannView Link by Swann

We will discuss in detail about the SwannView Link developed by Swann Communication is the best CMS to connect the Swann CCTV cameras. SwannView Link helps you to connect the CCTV cameras on your PC. This provides brightness adjustment, live view and application user management.

Swann has always been a leader. Begins its business from the Swann’s personal house basement in Melbourne, Australia. Swann has established and created its clients in the USA, Canada, Australia, UK, Hong Kong and China and also in other 40 countries.

Swann provides surveillance and monitoring technology by introducing its new product such as wireless HD cameras, video surveillance recording systems and cameras, and also 4K Ultra HD, 3-5 Megapixel HD, and 1080p HD camera setup with temperature and motion sensors technology.

SwannView Link

Get the download free now of SwannView Link, read the instruction of installation of SwannView Link.

Download SwannView Link For PC (Windows)

Download SwannView Link For PC (MAC)

Download SwannView Plus For PC

25. Amcrest View Pro by Amcrest

Here is the Amcrest View Pro designed and developed by the Amcrest Company. This application helps to connect the Amcrest CCTV cameras on your PC. This CMS provides features such as user management, live streaming, playback recording, etc.

Amcrest products are advance designed remote monitoring and surveillance systems which build a bridge between powerful capabilities, ease of use and affordability. With high quality and robust design, Amcrest cameras allow the user to securely monitor their residence, office premises etc. Amcrest camera systems are designed to record and produce live video and audio to the user anywhere in the world.

Amcrest is a top security products manufacturer as well as distributor servicing many clients worldwide primarily across the United States, Canada, the UK, Germany and France. Amcrest provides after-sales support and local warranty services to all of our customers in their local countries for free of cost.

Amcrest View Pro

Here is the free download of Amcrest View Pro free download and installation guidelines.

Free Download Amcrest View Pro for PC (Windows)

Amcrest View Pro for MAC Free Download

Conclusion

Here we have discussed some of the top 25 CCTV camera software for PC. These are the best softwares to control the CCTV cameras on your PC. The softwares are available to download free.

This CCTV software provides you with many features like a live recording, video snapshot, audio-video display, motion detection, night vision, and alarm notifications as well. With these CMS it easier to connect as well as manage the CCTV cameras.

We have discussed in detail about the “Top 25 CCTV Camera Software for PC“ in detail with the free download link of the software as well. For more information and query you can contact us by commenting on the comment section below of the article.

<p>The post Top 25 CCTV Software Free first appeared on NVR IPCAMERA SECURITY.</p>

ANSWER

This guide will explain how to export or copy files from the NVR’s HDD (Linux based) to a Windows PC. A ND8322P and Windows 7 PC will be used for this guide. Important note: turn the NVR OFF before extracting the HDD otherwise it could get damaged.

Steps:

Step 1. Connect the HDD to a Windows PC (you can use an external enclosure or connect it directly to the Mother board)

Step 2. Download a Linux reader to read ext4 files contained in the HDD, in this guide we will use Diskinternals Linux reader (Download link: http://www.diskinternals.com/download/Linux_Reader.exe ).

Step 3. After you open the Linux reader, it will automatically read all the drives connected to your PC

Step 4. In the Hard Drive section, you will find two Linux Ext drives, each one of them represents a partition in the NVR HDD.

Step 5. One partition contains the media data in where all the videos are stored (/opt/medi/volume0) and one partition contains database information (/opt/database).

Step 6. After opening the /opt/medi/volume0 partition you will find multiple folders, each one containing the recordings accordingly to the camera numbers (Please see NVR camera number designation).

Step 7. For example, If you want to export the recordings of camera 11, open the REC-10 file (Note: Cameras are denominated starting from 0, not 1),

Then select the folder with the recording you are looking and click the “Save” button.

Step 8. Select a folder in where you want to save the recordings, then click the “Next” button.

Step 9. After you select the destination folder, the wizard will show you a list of the documents that are going to be exported.

Step 10. When the exporting process if finished, you can go to the destination folder and play the recordings.

                                                                                   
                                                                                                                              

Important Notes: If the NVR was configured in RAID 3 or 5 you will need to attach all the disks otherwise the software won’t be able to read the partition.

<p>The post How to export videos from NVR HDD to Windows first appeared on NVR IPCAMERA SECURITY.</p>