FIRMWARE

<p>The post New Hikvision Hilook Firmwares 2022 first appeared on NVR IPCAMERA SECURITY.</p>

Description

Follow these instructions to update the firmware on a recorder using a USB storage drive. Be sure to download the appropriate firmware for your device.

Prerequisites

• USB Drive 1GB or more
• The proper firmware file for the device
• Physical access to the recording device
• A computer to load the firmware files onto the USB

Video Instructions

Step by Step Instructions

1. Download Firmware and copy to USB such as a flash drive ➞ Insert USB into recorders USB port.

2. It will prompt for option to upgrade, Click System upgrade ➞ Click Start.

3. Browse for firmware ➞ Open firmware folder is in ➞ Select Bin File ➞ Click Start. Device will reboot once finished.

Update Firmware via LAN(Browser)

This applies to DVR, NVR and IP Cameras.

Please Note : You need to clear previous active-x installs for newly applied updates to show on Web Service in IE Web Browser. To do this, Delete webrec folders from Program files and Program Files(x86) under Windows (C:) drive. Please also reference http://dahuawiki.com/Troubleshoot/Delete_Web_Rec

Description

This enables you to update the firmware of NVR/IPC/HCVR using browser.

Prerequisites

• Computer
• Internet
• Compatible Browser (Internet Explorer)
• NVR/HCVR/IPC

Video Instructions

Step by Step Instructions

Step 1: From IE(Internet Explorer) type in the devices IP address on the IE address bar → login with credentials.

Step2: Setup → System → Upgrade

Step 3: Click on “Browse” → Select correct firmware

• Click on “Upgrade”

• Device will reboot after upgrade is finished.

USB firmware Upgrade via web.

If firmware is on USB Device → Click on browse → Navigate to USB location → Select firmware → Open → Upgrade.

Update Firmware via LAN(ConfigTool)

Description

Use DahuaConfigTool to update firmware using the IP address of the device.

Prerequisites

• ConfigTool Click Here to Download ConfigTool
• Firmware Update File
• A PC or Mac connected to the same network as your device.

Video Instructions

Step by Step Instructions

1. Launch the ConfigTool

2. Click on the device you wish to upgrade, and click, “Login”

3. Input your device’s user name and password, and click, “OK”

4. Click, ‘Upgrade’

5. Click, “OpenFile” and locate the firmware update file.

6. Click, “Upgrade” and wait several minutes for the upgrade to complete.

How To Upgrade Firmware via NVR Cloud Update

Description

Select NVRs now have the capability of updating firmware from the cloud.

When the NVR detects there is a newer firmware in the cloud, a red ‘1’ icon will appear at the System icon.

The entire process takes about 5 minutes depending on network connection.

• 

  Notification of new firmware

• 

  Upgrade menu showing firmware information

• 

  Downloading the firmware file.

• 

  Upgrading the firmware.

Prerequisites

• Device that supports NVR Cloud Update (see list below)
• Internet connection to the device
• P2P Connection Online – How To Setup P2P

Supported Devices

Please reference the table below for what models support NVR Cloud Update and what firmware version(s) they must be at to support the NVR Cloud Update feature:

Video Instructions

Step by Step Instructions

1. Enter the Main Menu

From Live View – Right Click and select Main Menu

2. Click System

3. Click Upgrade

4. Click ‘Manual Check’ and the unit will detect if a newer firmware is available

5. Click Upgrade Now to begin the update process

6. The firmware file will be downloaded

7. After downloading the unit will automatically begin the firmware upgrade

8. The unit will reboot as the final step of the upgrade

Firmwares

<p>The post New Dahua Firmwares 2022 first appeared on NVR IPCAMERA SECURITY.</p>

To view a video showing the firmware upgrade process, click here.

1.1 Open Wisenet Device Manager from a computer connected to the same network as the camera.
1.2 Click on ‘Search’.

2.1 Select the device
2.2 Click on ‘FW’
2.3 Select ‘FW Upgrade’

3. Click on ‘File Open’

Note: You can also click the ‘Download’ button to have Wisenet Device Manager download the necessary firmware files.

4.1 Browse for the correct Firmware File.  Note that a downloaded firmware file is typically in a ZIP file.  You will need to first unzip the firmware file so that you can locate the .IMG file.
4.2 Click on ‘Open’

5. Click on ‘Upgrade’

6.1 Wait until the Status shows “Success” and the New version of the firmware is displayed.
6.2 Click on ‘Close’ to finish.

<p>The post How To Wisenet Firmware Update first appeared on NVR IPCAMERA SECURITY.</p>

4K Series

71.X.0.X(MS-N50XX-UH/MS-N70XX-UH/MS-N70XX-UPH/MS-N80XX-UH): http://www.milesight.com/support/download.asp
72.X.0.X(MS-N1009-UNT/MS-N1009-UPT/MS-N50XX-UT/MS-N50XX-UPT): http://www.milesight.com/support/download.asp
73.X.0.X(MS-N1004-UC/MS-N1004-UPC): http://www.milesight.com/support/download.asp

Previous Versions

61.7.0.7-r5(MS-N1009-UT): https://drive.google.com/open?id=0B8u2Oc2-fG-mc0dCR3paYzNKMGs

30.7.0.7(MS-N5009/5016): https://drive.google.com/open?id=0B3OW8hozx4jWT182aXBfMGxGUGs

31.7.0.7(MS-N1004/1008): https://drive.google.com/open?id=0B3OW8hozx4jWd2FhTmk0cWJmNFk

2.7.0.7(MS-N5004/5008): https://drive.google.com/open?id=0B3OW8hozx4jWY3lmOF8takNQWnc

1.7.0.7-r3(MS-N7016/8016/8032): https://drive.google.com/open?id=0B8u2Oc2-fG-md0pwOFJMM3V4X2c

Note:

1) The second number of firmware stands for major version number, while the last two number means the minor version number. Take 71.7.0.5 for example, it means that the NVR’s major version is 7 and it’s minor version is 5.

2) You can use monitor to upgrade your NVR, or you can upgrade it via browser. If click the link to get the upgrade firmware failed, please copy the link to browser and open again.

3) If the firmware of your MS-N1009-UT begins with 61.X.X.X, or the SN begins with 12xxxxxxxxx, then use the 61.X.X.X.

If your MS-M1009-UT firmware begins with 71.X.X.X, or the SN begins with 13xxxxxxxxxx, then use the 72.X.X.X.

2. Steps for Monitor

Step1: Enter upgrade menu by clicking “Main Menu”→“System Settings”→“Upgrade”.

Step2: Search for the device you downloaded in your USB, and select the file.

Step3: Click “Upgrade” button to confirm the upgrade.

Note:

The system will be automatically rebooted after being confirmed upgrade.

3. Steps for WEB

Step1: “Settings”→“System”→“Maintenance”.

Step2: Click “Browse” and find the position where you downloaded.

Note:

Remember to check the model, use the corresponding firmware for your model.

Step3: After choosing the corresponding firmware, click “Upgrade” button to confirm the upgrade.

Note:

The system will be automatically rebooted after being confirmed upgrade.

4. Steps for SmartTools

Step1: Use Milesight Smart Tools to search out this NVR according to its MAC address.

Step2: Click “Browse” and find the position where you downloaded.

Step3: After choosing the corresponding firmware, click “Upgrade” button to confirm the upgrade.

Note:

You can also use Smart Tools to download the latest firmware.

“NVRTools”-“Upgrade”-“FirmwareOnline”

The link for Smart Tools:

http://www.milesight.com/DownloadFile/Software/Smart_Tools/Milesight_Smart Tools_Setup.zip

<p>The post How to Upgrade Firmware for Milesight NVR first appeared on NVR IPCAMERA SECURITY.</p>

<p>The post Chinese IPCAMERA New Firmware first appeared on NVR IPCAMERA SECURITY.</p>

IMPORTANT: If you are unable to verify the status of your device’s firmware, please call our Technical Support at 1-888-425-6739.

Recorder

To check if you have the latest firmware on your recorder, please follow these steps:

Step 1. Go to Main Menu > Settings > System > Upgrade.

Step 2. In the Upgrade settings, click Check for Updates.

Step 3. If there is an available update for your recorder, please proceed with upgrading your firmware. If not, you will get a message that you have the latest firmware.

IMPORTANT: To receive automatic updates, make sure the box is checked next to Automatically Check for Updates, then click OK.

Lorex Home App

To check if you have the latest firmare on your Lorex Home app, please follow these steps:

Step 1. Launch the Lorex Home app.

Step 2. Tap more or the three dots to go to Device Settings.

Step 3. Tap Firmware.

Step 4. If there is an available update, please proceed with upgrading your firmware. If there is no new firmware available, the Latest version will just be empty.

IMPORTANT: All Lorex firmware updates are free of charge.

There are two ways of upgrading the firmware of your recorder: USB Upgrade and Cloud Upgrade.

Part 1 – USB Upgrade

For this procedure, you need (1) the latest firmware for your recorder, (2) a formatted and empty USB flash drive, (3) access to a computer with internet connection, and (4) a valid email address.

Step 1. To upgrade your recorder to the latest firmware, call our Technical Support at 1-888-425-6739 and request for your recorder’s latest firmware. When calling, make sure you have your recorder’s the correct model number and a valid email address at hand. We will send the firmware download link via email. NOTE: The download link will expire in a specified period of time.

Step 2. Next, format your empty USB flash drive using your recorder. IMPORTANT: We highly recommend that you format your USB flash drive using your recorder. To format your USB flash drive using your recorder, please read the full instructions here.

Step 3. Once you have successfully formatted your USB flash drive, remove it and insert it into your computer’s USB port and download the firmware we sent via email.

Step 4. Verify that you have the correct firmware, then remove the USB flash drive from your computer, and insert it back into one of the USB ports on your recorder.

Step 5. On your recorder, go to Main Menu > Settings > System > Upgrade.

Step 6. In the Upgrade settings, click USB Upgrade.

Step 7. In the popup window, select the firmware that you have previously downloaded for your recorder.

NOTE: Make sure to select the file with .bin extension. See image below.

Step 8. Then, at the bottom of the screen, click Start to begin the upgrade.

WARNING: Please DO NOT turn off the power during the firmware upgrade. Wait until the unit reboots and display the new live view.

Congratulations! You have successfully updated the firmware of your recorder.

Part 2 – Cloud Upgrade

To upgrade your recorder’s firmware via Cloud Upgrade, it is necessary to connect the recorder to your network.

Step 1. Go to Main Menu > Settings > System > Upgrade.

Step 2. In the Upgrade settings, click Check for Updates.

Step 3. If there is an available update for your recorder, please proceed with upgrading your firmware. If not, you will get a message that you have the latest firmware.

IMPORTANT: To receive automatic updates, make sure the box is checked next to Automatically Check for Updates, then click OK.

<p>The post How to Lorex devices firmware updates first appeared on NVR IPCAMERA SECURITY.</p>