IPC Upgrade – NVR IPCAMERA SECURITY

EseeCloud Devices Advanced User Guide

M.Salih ASLAN — Wed, 04 Oct 2023 09:34:41 +0000

EseeCloud Is A Simple, Stylish, User-Friendly And Powerful Mobile Video Surveillance Software. We Are Committed To Continuously Improving Our Video Processing Technology And Video Innovation Technology, And Providing Global Security Products, Professional Industry Solutions And Superior Services To Continuously Create Greater Practical Value For Our Customers.

Access from smartphone

(1)Download APP

Search and download “Eseecloud” app from App store or Google play on your phone.

(2) Register

If you install and open “Eseecloud” app at the first time, an account need to be registered initially.

ce”.

(3) Add device

Method 1: Add the device via QR code.

EseeCloud Devices Advanced User Guide

Method 2: Add by cloud ID.

Cloud ID: Enter NVR’s System Setup – Network Setup to input Cloud ID or Scan QR Code)

Device name: Choose a name for your system of your choice.

User Name: Enter the NVR’s User Name (default: admin)

Password: Enter the NVR’s Password (default: NO password)

Method 3: Add by LAN scan.

Please make sure you are connected to the same wifi.

Access from remote PC

1. Access from remote PC (Log in with Cloud ID)

Operation Steps: ( We suggest you to use microsoft IE, otherwise some services will be invalid. )

1. Open your browser

2. Enter http://www.e-seenet.com

Cloud ID: (Enter NVR’s System Setup-Network Setup to input ID or Scan QR Code)

Username: Enter the NVR’s User Name (default: admin)

Password: Enter the NVR’s Password (default: NO password)

3. Enter the correct device ID, user name and password.

4. Click login to enter live view interface.

Note: To successfully remote access your system, the device ID should be ONLINE.

2. Access from PC Client (CMS)

1. Please download CMS from the below link:

http://www.tontonsecurity.com/download/page_show_67.html

2. Login user: admin, password: (default: NO password, please keep it blank)

3. Please enter “Add” to add device, you can add it “By IP/DDNS” or By Cloud ID”

4. By IP/DDNS:

IP/DDNS: (Enter NVR’s System Setup-Network Setup to find IP)

Port: (default: 80)

Username: Enter the NVR’s User Name (default: admin)

Password: Enter the NVR’s Password (default: NO password)

Device name: Choose a name for your system of your choice.

Type: choose “NVR”.

Number of Channels: please input the correct number of the channels.

Click “Finish” and go back to “Preview”, click the device name to view live video.

5. By Cloud ID:

Cloud ID: (Enter NVR’s System Setup-Network Setup to find IP)

Username: Enter the NVR’s User Name (default: admin)

Password: Enter the NVR’s Password (default: NO password)

Device name: Choose a name for your system of your choice.

Type: choose “NVR”.

Number of Channels: please input the correct number of the channels.

Click “Finish” and go back to “Preview”, click the device name to view live video.

Add the IP camera to the NVR by matching code

1. When you use Match Code
1.1 Add new add-on cameras to your system
1.2 Re-pair camera to NVR when they lose connection. You need to delete the
Network Unreachable channel at first, then re-pair the camera to an unoccupied
channel. (unoccupied channel always shows No Video Source under Status.)

Tips: The IP cameras in pre-packed kits have already been paired to the NVR. So the
cameras will automatically connect to the NVR once they are plugged in power.

2. Add camera by matching code.
2.1 Power on the camera which has no video, and connect this camera to the NVR
via Network cable.

2.2 Right click mouse on the main interface, select “Video Manage“

2.3 Click “Refresh“, find the camera’s IP. Click “Match Code“, then click “Yes“, the
NVR will start to match code to the camera.

2.4 After matching code successfully, the “status” will show “Connect success“.

Then you will see the camera is added to the NVR and display video on the screen.

What is the WiFi distance of the wireless kits?

Between each camera to the NVR:

In open space we tested 350m (1150ft) working distance;

With normal obstacles like 1-2 walls, we tested 35m (115ft) working distance.

For distance we only have theoretical values.

No certain distance can be guaranteed due to different environments applied in.

It varies depending on obstacles and signal interference.

on the contrast, if there are many blocks and signal interference between, the distance could be closer.

What if your NVR system keeps beeping?

1. Please right click your NVR mouse, then click System Setup – General Setup – Error setup, make sure that “Enable” and “Buzzer” are unchecked.

2. Please right click your NVR mouse, then click System setup – Channel setup – Video detection, make sure that “Buzzer” is unchecked for all channels.

3. If you have checked above 2, and none of the buzzer are checked.

Follow below to stop the beeping:

a. Right click your NVR mouse, then click System setup – System Admin – Factory setting, uncheck WiFi Reset, then click Apply to reset NVR settings.

b. If you cannot view the cameras on the NVR after resetting, please right click your NVR mouse, then click Exit system, choose shutdown. Follow on-screen message to unplug NVR from power and then re-plug it back to NVR. Wait for NVR to initialize.

Then the cameras shall come back.

How to upgrade the NVR system

1. Please download the update file to your computer and unzip it, then plug the USB flash drive,and move the unzipped update file to the root directory of the USB flash drive.

Note:

1)Please move the update file to the root directory of the USB flash drive, do not move the subdirectory.

2)Do not change the file name.

2. Connect USB-disk/mouse and USB hub with NVR shown as flowing.

3. Enter the NVR’s menu (System setup\System Admin\System upgrade),
Click “Start” to begin upgrading.
.

Note: Please keep power supply well during the upgrade.

4. Once the upgrade is done, NVR will restart system automatically.

How to view playback on NVR system

1. Right click the mouse , choose video playback

2. In the menu bar on the right, choose record type/channel/data to search what
you want to and click playback.

3. Click Backup and the video will be saved in USB storage

How to Add C8601 Cameras to Tonton NVR System

Document

Video

How to connect and set up the Wireless Network Camera System?

1. Connect the DC 12V/2A power adapter to the Power port of the NVR.

When Power indicator light is on, NVR starts to work.

2. Use VGA / HDMI cable to connect your NVR and Monitor / TV, then preview interface can be seen.

3. Plug the network cable and mouse to the ports of NVR rear panel.

4. Connect the DC 12V/1A power adapter to the IP camera (IPC).

Each camera has one 6ft length power adapter.

5. After finish connecting, the NVR will search the IPC automatically and start to initialize the connection.

When completed connection, the images will display.

6. Login this system:

Username : admin

Password: (there is no password, please keep it blank)

(Note: if you want to change the password, you can go to NVR’s System Setup – System Admin -User management – Set password to change it.)

7. Then you can follow up the below steps to set up on your phone:

If you want to view the cameras remotely, the NVR should be connected WAN network, Please ensure DHCP in your Router is open.

If you don’t know how to enable the Router’s DHCP, please input the IP Address of your

Router to IE browser, then you will find the network information, you can enable the “DHCP”.

After that, please go to NVR’s System Setup – Network Setup to enable “DHCP”

Then the system will obtain the IP Address, DNS from your Router automatically.

Or you can go back main menu to select “Fast Network”, Then the system will connect the WAN network automatically.

8. Access from smartphone

(1). Please download “Eseecloud” app from App store or Google play on your phone.

(2). If install and open “Eseecloud” app at the first time, an account need to be registered initially.

(3) Add the device.

Method 1: Add the device via QR code.

Method 2: Add by cloud ID.

Cloud ID: Enter NVR’s System Setup – Network Setup to input Cloud ID or Scan QR Code)

Device name: Choose a name for your system of your choice.

User Name: Enter the NVR’s User Name (default: admin)

Password: Enter the NVR’s Password (default: NO password)

Method 3: Add by LAN scan.

Please make sure you are connected to the same wifi.

9. Access from remote PC (Log in with Cloud ID)

PC : our item only support IE browser, please input “www.e-seenet.com” to IE Browser to view your cameras.

Cloud ID: (Enter NVR’s System Setup – Network Setup to input ID or Scan QR Code)

Username: Enter the NVR’s User Name (default: admin)

Password: Enter the NVR’s Password (default: NO password)

(Input the correct Cloud ID, user name and password, click login to enter live view interface.)

NVR video backup.

1.Right click mouse > select Video backup.

2. Enter into the interface of Video backup.

Select Channel, Record mode and Search time.

Click “Search”. After that, the chosen video will display in the list.

3. Select the section which you want to backup.

Then, click the bottom “Backup”.

4. Next, there will pop up a dialog box asking are you sure to backup this record.

Click “Yes” if you are sure.

Before start to backup, system will inform you to insert U disk within one minute.

If you want to cancel the operation of backup, you can click “Cancel” to withdraw.

NOTE: The NVR only one USB port, so you have to unplug the mouse

and plug the U disk within one minute.

5. After you insert U disk, what you should do is just wait a moment.

6. Backup is completed when system inform you “Backup record succeed“.

And you can unplug your USB disk at that time.

How to setup audio function?

1. System connection

(1) The monitor must have HDMI input port.

(2) Connect the HDMI port on both sides with the included HDMI cable.

2. NVR setup

(1) Choose the option “Private” on this interface during NVR’s restarting. It allows you select audio or not.

(2) Check whether the encode mode is “AV stream” or not.

(3) On the live window, click mouse to select any channel to pop-up the hidden volume icon like a speaker, click it repeatedly to hear or mute the sound from camera.

How to use a new Gmail mailbox account to set NVR mail alarms?

1.Register a new Gmail mail account, and log in.

2.Get into your mailbox>click the “” in top right of page>get into “My Account“.

3. Click “Sign-in&security” and enter the interface,Turn on “Allow less secure APP on“.

4. After that, you will receive an email from Google, which means “less secure sign in” has been turned on.

5. Get into NVR system. Right click mouse>select System setup>Network setup>Network Status.

Check if your NVR’s network connected successfully.

Before operate what mentioned above:

Make sure Cloud(P2P) display “ONLINE“.

Make sure the Network Status display “Healthy Network“.

6.Then, click the “E-Mail”.

Input your Gmail SMTP Server (smtp.gmail.com) in ” SMTP Server” Input your Gmail account in “Username” and “Sender”.

Change the “Encryption Type” to “TLS”.

Input your Gmail password in “Password”

Input your two inbox address in “Sendee 1\2”

After that, click “Apply”>click “Test”.

7. When the system remind you “Test successful”, which means NVR’s mail alarm is set successfully.

8. PIR video detection setting as below picture:

(1). Click “Channel setup” and “Video detection”

(2). Choose Motion Detection, disable it

(3). Choose PIR Input Armed Detection, Enable E-mail Notice

9. After finished setting, When alarm is triggered, you will receive email from NVR.

PIR alarm setting

Only PIR detection recording setup

1. Disable motion detection function, click ok to save

2. Choose Detection Model with PIR Input Armed.

Please noted: If you want to set Buzzer, Email notice or App alarm, you can enable them, in this way, you will get notification on email or App.

3. Press “Reset” to clear default setting

4. Click the icon “Alarm”

5. Press and drag the left button of the mouse to select needed schedule.

6. Click ok to save

7. Cancel the manual recording mode

8. Once the PIR detection is trigged, the live window will display an icon like below, it means PIR recording is running

How to Reset NVR’s Password

Reset NVR’s Password

1. The interface when you log in.

2. Click “OK”. If you input incorrect password,

monitor will display “Username/Password Is Incorrect!”.

3. Continuously and successively click left button and right button in blank space of prompt box for six times.After that, monitor will display “Restore default user”.

4. Click “Yes”, and you will access to the interface where you can reset NVR’s password.

Tips: 1. The username must be “admin”, or else the password won’t be retrieved.

2. If you want to make new password, please leave it blank in column of “Old password”.

3. Delete the old password after reset the new one.

4. If you have set a new password for NVR, remember that NVR password cannot exceed 10 characters, or the NVR will not save it correctly.

reset NVR’s password click to download video

How to install iSmkit PC client

How to install iSmkit PC client Click here to download

Gmail Mail Configuration Guide

(DE) Gmail Mail-Konfiguration Anleitung

click here to download

(FR) Guide de configuration de Gmail Mail

click here to download

(CN) Gmail邮件配置指南操作步骤20230922

click here to download

(EN) Gmail Mail Configuration Guide

click here to download

Email SMTP and POP3 settings

click here to download

Solve the problem of the white light always on(Applicable to 3.6.60 and above Version)

Precautions:

1. Please check your IPC version first, only 3.6.60 and above version can be solved the problem through upgrade.

2. The camera must be able to produce the image, if the camera can’t be viewed or resetted, it can’t be upgraded.

Check IPC Version:

Go to “System Admin” – “IPC Maintenance” to check the version of the problem camera. Please note: Don’t upggrade the version 3.6.16 and below version with these upgard file.

Download the upggrade file:

For 3.6.60 Version: Download Link

For: 3.6.60 Above Version: Download Link

Upgrade Method

1. Upgrade the IPC via NVR system

（1）Please download the update file to your computer and unzip it, then copy the update file(IPCAKV3C_xxxxx.rom) to a USB flash drive. Please note: Don’t change the file name

（2）Plug the USB flash drive to the NVR’s USB interface

Enter the NVR’s menu (System Setup-> Channel Setup-> IPC Upgrade)

（4）Click the “Channel” and select the upgarde channel of the IPC.

（5）Click “Start” and “Yes”, the IPC will be upgrading. Please note: During the upgrade, please don’t power off the NVR and the camera.

（6）If the camera upgraded successfully, the Status will show “Success!”.

2. Upgrade the IPC via TF card.

（1）Unzip the upgrade file, then copy the “help.rom” file to the TF card. Please don’t change the file name and move it to the root directory, do not move the subdirectory.

（2）Power off the camera, then insert the TF card to the TF card slot. Then power on the camera.

（3）Waiting for about 1 minutes, the camera will start up. Then press 3 times continuously of the reset button for the camera(In order to prevent operation errors, you can press several times, which will not affect the upgrade).

（4）About 2 seconds later, the camera will makes a sound for an upgrade. Then waiting for about 2-3 minutes, if the camera restart and works normally, it means that the upgrade is successful.

New Manual for Dual light

Click here to download

If the IP camera doesn’t work with NVR system,please check …

1. First of all,please confirm both of the camera and the NVR are powered on .

(1) Camera is powered on: Please plug the power adapter to the camera ,and then cover the IR-Cut with your hand (See picture), finally to check if the night vision will be activated or not .

(2) NVR is powered on : Please plug the adapter to the NVR ,and then see whether the power indicator is on.

2. Secondly please enter NVR system — Video Manage ,and check if the status of camera is connected successfully or disconnected.

3. Thirdly, if the camera is disconnected,please confirm the distance of the camera and NVR system. The far distance will affect the signal transmission.Please follow the below steps to fix the issue:

(1) . Please enter NVR system — Video Manage — delete camera (The same page as the Step 2)

(2). Remove the camera and take it next to the NVR system,and prepare a network cable and start to match code for the camera and the NVR.

(3). How to Match code :

A. Connect this camera to the NVR via Network cable.

B. Right click mouse on the main interface, select “Video Manage“

C .Click “Refresh“, find the camera’s IP. Click “Match Code“, then click “Yes“, the NVR will start to match code to the camera.

D. After matching code successfully, the “status” will show “Connect success“.Then you will see the camera is added to the NVR and display video on the screen.

4. Finally, you could unplug network cable and put the camera to the place where you want .

How to change the channel

1.Please click “Video Manage”.

2.Make a note of the camera IP address you want to change.

3.Click “Manual Edit” and enter the IP address on the corresponding channel.

How to fix black screen Monitor for 10” /15.6”NVR

click here to download the operation video

How to get the NVR system ONLINE?

1. Please make sure you enabled DHCP of your Router.

2. If you don’t know how to enable the Router’s DHCP,

please input the IP Address of your Router to your computer browser,

then you will find the network information, you can enable the “DHCP”.

3. After that, please plug a network cable to the WAN port on back of NVR.

4. If the system refuses to go ONLINE?

Basic troubleshooting:

(1). Check if your network cable can work well.

If NVR is getting signal, there should be flash light. If not, please check the connection and cable.

(2). If the port is right and NVR is still OFFLINE, then it should be DHCP issue.

Enable DHCP on your NVR.

Click right button of mouse, go to NVR’s System Setup – Network Setup – check the DHCP and enable it,

apply and save it. Wait for 1 minute to see if the status on bottom right corner changes to ONLINE.

5. Or you can go back main menu to select “Fast Network“,

Then the system will connect the WAN network automatically.

Within 1 minute, you shall see NVR status changes to ONLINE and the NVR is ready to be viewed

from anywhere anytime.

6. If this can’t help you, probably your Router disabled DHCP or block new devices from connecting.

What DHCP does is: when Router find new device connected, DHCP allocate new IP to the device

and connect it to the Internet.

An easiest way to know if your router enables DHCP:

When you connect a new device to your WiFi for Internet service (or a visitor/ friend wanted WiFi

connection), does it require WiFi password only? If only password required, then your router has

DHCP enabled; if that requires not only password but also some settings, then your Router is secured

from connecting new devices. Please ask people who secured the WiFi (who set password) to enable

the NVR to connect.

The Step 4 and Step 5 should enable 95% users to get NVR ONLINE.

Even if the status shows OFFLINE after all this, we suggest you to use APP and access the Cloud ID

to see if it works.

Note: Always wait for 1 minute after any change.

Advanced troubleshooting

If the basic steps above does not solve the issue. Follow below steps to do further troubleshooting.

1. Make sure the cable you connect to NVR has Internet access.

Please use a laptop or any PC has RJ45 port

Â· Disable the wireless connection of laptop.

Â· Unplug the network cable from NVR and plug it into the PC, see if the PC can access the Internet via the cable.

Â· If it does, then the cable is good; if it does not, change a cable.

Â· If cable is good yet no Internet connection, please ask help from your network administrator

Â· to give the cable Internet access.

2. Enable DHCP of your router, please refer to Step 2.

If you don’t want to use DHCP, or you want to set up a static IP Address for your NVR system,

you can follow the below steps to set up:

Well, we can allocate IP manually for the NVR and connect it to Internet.

1. Know your router gateway.

This is the IP that goes to the menu of your router.

This will vary slightly from manufacturer to manufacturer, and will be listed in the documentation.

Here are some common IP addresses for various routers:

Linksys, 3Com, Asus, Dell, US Robotics: 192.168.1.1

Qwest (AKA CenturyLink), DLink, Netgear, Trendnet, Senao: 192.168.0.1

Belkin, Microsoft, and SMC: 192.168.2.1

Apple: 10.0.1.1

If you have misplaced your documentation, and you do not see your router listed here,

search on Google for your router name and “default IP address” to find the correct information.

Another way to locate your router’s IP address: on a PC, open the command prompt (click on Start >

Run/Search for cmd) and enter ipconfig. Look for the Default Gateway line, and try that number.

On a Macintosh, open the Network control panel (System Preferences…, Network) and look for Router:

This is your router’s IP address.

2. Go to NVR’s System Setup Network Setup

How to switch wireless connection to wired connection

1. Please connect IP camera to NVR by net cable

2. Checking the Network setup of NVR, remember the network segment of the IP address with NVR

3.Right click mouse, Enter into VIDEO MANAGE

4.Click Refresh, search the IP address of camera which connect to NVR

5.When you find the IP camera on NVR, please click Modify, revise the IP address of camera to the same network segment with NVR

Please noted: The IP address of camera can’t conflict with the IP address of other devices

Click Yes to save

Double click the IP address, the camera will connect to NVR automatically

6. After setting the IP camera, connect NVR and the IP camera to the same router by net cable, Refresh NVR, search for the IP camera, then add it to NVR, in this way, the IP camera will connect to NVR by wired

When 3MP IPC is added to NVR, it prompts “resolution too big”

When adding a 3MP camera to the NVR, if the “resolution is too large” prompt appears.Please modify the NVR resolution, the detailed operation is as follows:

1.Please click “Video Manage”.

2.Select the camera that appears “Resolution too big”, and then click “Channel Setup”.

3.In “Channel Setup-Encode setup”, modify the resolution to 1920*1080, and then click “Apply” to save the settings.

4.Disconnect the power of the camera and restart it, after adding the camera, the camera can be used normally.

Dual light and AI function setting instructions

Click here to download

iSmKit CMS user manual

Click here to download

How to upgrade the 8CH NVR to 10 Channel(Only for Version 3.1.8.0M)

1. Comfirm your system version if is the version 3.1.8.0M first.

Note: This update file only supports NVR version(3.1.8.0M) to update to 10 channel, if your system version is not 3.1.8.0M, please don’t use this update file to upgrade your system, otherwise it will cause the system not work.

Go to “System Admin” – “System Version” to check.

2. Download the upgrade file to your computer. Click here to download

3. Unzip the upgrade file via rar or zip, then plug the USB flash drive, and move the unzipped update file to the root directory of the USB flash drive.
Note:
1)Please move the update file to the root directory of the USB flash drive, do not move the subdirectory.
2)Do not change the file name.

4. Connect USB-disk to the NVR.

5. Enter the NVR’s menu (System setup\System Admin\System upgrade), Click “Start” to begin upgrading.
Note: Please keep power supply well during the upgrade.

6. Once the upgrade is done, NVR will restart system automatically.

Effective Troubleshooting for Non-Functional 16-Inch Monitor

Effective Troubleshooting for Non-Functional 16-Inch Monitor

Youtube Video: https://youtu.be/QVtIkMScO0Q

1. If the indicator lights in the bottom right are OFF, replace the monitor’s 3A power supply.

2. If the indicator lights in the bottom right are ON, but the screen is black, check the screen cable.

If the display shows “Power Saving,” there are two possible scenarios:

3. For “No Signal → Power Saving”:

When there is no signal, immediately press the “Auto” button. This will bring up the signal source selection menu. Use the “←” or “→” keys to navigate to the first option (“Auto select”), then press the “Menu” button to confirm.

4. For “No Cable → Power Saving”:

Please check the two connecting cables in these locations.

The post EseeCloud Devices Advanced User Guide first appeared on NVR IPCAMERA SECURITY.

HiSeeu Wireless Camera System installation guide

M.Salih ASLAN — Wed, 11 Jan 2023 19:20:21 +0000

HiSeeu Wireless Camera System installation guide right click your NVR mouse choose fast network, then click auto config, check cloud ID status is online and network is healthy, then you can remotely check the system on your phone app

What should I do if I forget my password?

For version : 3.0.3.0 if it doesn’t notice the password is incorrect , pls make sure you used the wired mouse, due to 3.0.3.0 version doesn’t support wireless mouse.

Note:User name and password should not exceed 8 characters and should not contain such as &*! @ (… #% and other special characters

You can refer to our YouTube channel videos : https://youtu.be/KJpJnYFlGK8

1) Within the black area, Click the left mouse button>right mouse button>left click>right click… Lasts 6 times

2) Yes

3) Input your new password,The old password is empty,you don’t need enter anything.

HiSeeu Wireless Camera System installation guide

Read Next : Hisilicon IP Camera Firmware Update

4) OK

5) If this step still not work, please email Johnny@hiseeu.com with below screenshot of your NVR, then they will send you the super password to login

How to solve the problem of camera connect failed?

Please follow these steps to troubleshoot

Please check if the white antenna on the camera is loose first.

1)Cover the sensor under lens on the camera to see if the light is lit or not.

If it’s bright, it means camera is not bad.

If it’s not lit,You can connect the power of a good camera to the bad camera.

In the case of determining that camera is not broken.

2）right-click the mouse> video manage> Refresh / Search

3) if your camera with reset button, no LAN port, please take camera close to your NVR

1. delete the connect failed channel

2. press the reset button on camera for 10 seconds

3.Right click the mouse again > wireless add > wait the screen show a new camera IP address 172.20.14.**

4. if no IP address, pls reset camera for several times,

After adding the camera successfully, you can exit the add camera interface

below is the video for you check :https://youtu.be/Kaxvth-sd-Y

4) if your camera with Lan port

Pls use an Ethernet cable connect the camera to your NVR.

Delete the connect failed Channel>Refresh(Search) find IP address 192.168.**.**>Match Code(wait for IP address change to 172.20.14.**)

After that you can unplug the Ethernet cable.

You can refer to this youtube video.

https://youtu.be/kmNnFgjLiPI

HDD not fund / Not record anything

Please refer to these below to solve the HDD not fund issue.

1）Check the power adapter connected to the NVR box. The NVR box uses 12V 2A or 12V 3A power supply. If you connect the 12V 1A cameras’ power supply to the NVR, the NVR box will not provide enough power to drive the hard drive.

2) If hard drive is preinstalled, there are 4 screws at the bottom of NVR box.

3）Check Hard Drive Information on NVR box and Format it

Right click the mouse>system setup>General setup>HDD setup>select the hard disk>Click Format, if the progress bar always shows a few percent or the formatting is failed, please contact with us.

4) Please open the NVR with a screwdriver, check the two cables connecting the hard drive and see if they are loose.

5）Take the hard disk out and install it on your computer. Check if the computer can recognize the hard disk. This is to confrim the HDD is the problem or not.

How to solve Gateway Unreachable or Network Error

If you click “fast network” to appear: Gateway Unreachable or Network Error , pls fellow below steps:

Step 1:

1) you must check if the network line is faulty or not: check whether the switch and router line connection are correct.

2) Can you connect to the external network normally through the computer wired connection?

Notice: Do not directly connect the recorder to the fiber

Step 2: Right click mouse and choose Fast Network —-> Auto config ,check if the network will be healthy or not

Step 3: If the auto config still can’t make it work , pls kindly check the same network computer network setting

Then “manual configuration” set the recorder network settings, don’t choose DHCP, input the same IP address and gateway and submask same as your computer

Offline

1)Pls Connect NVR to your router with an Ethernet cable. After that right click the mouse > Fast network.

2)If Step 1 doesn’t work, Maybe the Ethernet cable is damaged. Please replace it with a new one

3)If there is no problem with the cable.

Pls right click the mouse> system setup >Network setup>Do not choose DHCP>Change DNS to 114.114.114.114 or 8.8.8.8 > Power off the NVR and power on again(Reboot the NVR)

4)You can also connect the NVR to your home WiFi,

Enter the wireless internet interface > Select your home WiFi and enter your password > Apply

Change the display channel of the camera

When you select the corresponding channel, you can click the two buttons on the left, and then move the channel

You can also drag the image directly to another channel

How to set up Motion Detection？

1)Enable Motion Detectin on NVR Monitor

Pls right click the mouse>system setup>Channel Setup>Video detection>Selecting the Channel for Motion Detection>Choose the form of alarm>After you set it up you can Click “Copy to” to set to all channel

2) Set the area of motion detection to be set within the field of view of the camera.

3)App Alarm

a)Select App Alarm on NVR

b)Click three dot> Alarm push

c)Click System authority settings, turn on all permission of the app.

How can I view the camera remotely?

There are four methods to view the camera system remotely. Please refer to these step below.

1) First you need to connect the NVR with your router by wired or WiFi

Wired connection

1. wired connection, connect the NVR with router by ethernet cable

2. right click your NVR mouse choose fast network, then click auto config, check cloud ID status is online and network is healthy, then you can remotely check the system on your phone app

3. if not online and healthy network, please click manual configure, and check your router detail,

make sure the NVR and your router is the same IP gateway, IP address the first 3 number should be the same, the last one can’t be the same ,. preferred DNS please change to 8.8.8.8 and apply it

WiFi connection

1. please notes our NVR only can work with 2.4Ghz wifi network,

2. right click your NVR mouse choose system setup–network setup–wireless internet –enable wireless LAN, then find your house wifi name, input password, apply it

（please note the wifi name can not included any special character ,such as “_”, otherwise it will show connected failed.）

3. check the status is connect failed or success, if it is failed, please click view details,

check the same wifi network details on your phone and your NVR, then change them to the same IP gateway, IP address the first 3 number should be the same, the last one can’t be the same ,. preferred DNS please change to 8.8.8.8 and apply it

https://www.hiseeu.com/a/help/article/27632

2）To view on the Phone

a) Setup NVR box

Please reset your password：right click mouse>system setup>system admin>user>setuppassword>change a new password(Password must be within 8 characters)

b) Setup Mobile Phone

Scan below code download “Eseecloud”

c) Click “+”–“other way to add/scan the QR code on your NVR fast network page “–input cloud ID user name is admin and password is the one you login in NVR (If you doesn’t change the user name and password, User Name is admin password is the one you set for the NVR before), if your forget the password please refer this step: https://www.hiseeu.com/a/help/article/27650

(Cloud ID is in the lower right corner of the screen or right click your NVR mouse and choose fast network to find Cloud ID)

Scan the QR code on display

The user name is admin, enter the password of your camera system in the password field

3）To view via Eseecloud software on PC

EseeCloud for Windows PC

Eseecloud MAC: http://download.dvr163.com/tool/EseeCloud-mac-2.0.8_20200228.zip

Eseecloud Windows: http://download.dvr163.com/tool/eseecloud/EseeCloud_Setup_3.0.7.10.exe

here is the video to check how to add it : https://youtu.be/0AX1-sMKJG4

If you have registered your eseecloud account on your mobile phone, you can directly log in with your eseecloud account on the computer, and the account information will be automatically synchronized to the PC software

Double Click Cloud ID

How to remove the red triangle mark

For the red triangle mark it is for notice you something happened for your camera

such as the motion detection , video loss, HDD not found,

for remove the triangle

1. you need upgrade your NVR version to 3.0.5.0

there are 2 ways to upgrade

1) online upgrade, connect the NVR with router by LAN cable , right click your NVR mouse and choose system setup–system admin–system upgrade–online upgrade

2) offline upgrade, you need copy the firmware to the USB disk and choose local upgrade the firmware you cane email Johnny@hiseeu.com to get it

3) after you upgrade successfully, pls right click your NVR mouse and choose system setup–general setup–error setup–disable alarm icon.

Connect the camera to WiFi, then add it to NVR

You can connect the camera to your home wif and then add it to NVR.

First you need to press the reset button for 6s on the camera to reset the camera,

1) Please refer to pages 4 to 6 of the manual in the attachment to connect the camera directly to your mobile app,

２）First, you need to connect NVR to your router,

Then search the NVR for the camera connected to WiFi

Right Click the mouse > Video manage > Change the “protocol” to “onvif” > Search > Add one

if it show Password Error, please go to your phone app , click “…”–“Edit” then on blank place quickly click 6 time you will see cameras password here, go back to NVR video manage page, select the correct channel, click Manual Edit to input camera password .

What to do when the screen color is not displayed correctly

1） Click the mouse to select the screen –> click the 3rd icon (color adjust)

2) Click Default button–>select Ircut mode–>Ok

If it doesn’t solve your problem ,pls send this screenshot to us

Audio function！

1:Please check if there is a microphone hole on the back of the camera.

2:When you want to use the audio function of the camera, you need to turn on the audio function of the camera:(left click your mouse on the camera images)

3: right click your mouse — turn up the volume

4: Also turn on the audio button on App

if your version is 3.0 ,you should choose the AV stream also,refer these step

right-click the mouse ->System Setup->Channel Setup ->Encode Setup ->Select orresponding Channel(1-8) ->change the Encode Mode to AV Stream -> Apply

5: Every camera supports audio, but you can only use the audio of one camera at the same time.

and if the NVR your had order is with monitor, pls plug in your headphones or stereos behind the NVR

Why can’t remotely check the playback and change the setting

pls fellow below step

right click your mouse and choose system setup –system admin–user–edit user– choose remote and config and playback

How to solve the problem of camera lost connect with NVR, need reboot the camera to fix this problem?

Firmware 1: https://www.dropbox.com/s/qlyr53xfsrjscox/%E9%87%8D%E5%90%AF%E7%9B%B8%E6%9C%BA%E5%9B%BA%E4%BB%B6.rar?dl=0

IPCAKV3W_20220415_3_6_82_572011

(Fix the camera lost connection with NVR need unplug camera power cable)

Firmware 2: https://www.dropbox.com/s/mrdzs1ioqhmuuve/%E4%B9%9D%E5%AE%89%E5%8D%95%E6%9C%BA%E4%BF%A1%E5%8F%B7%E4%BC%98%E5%8C%96%E5%9B%BA%E4%BB%B6.rar?dl=0

IPCAKV3C_20220415_3_6_82_572010

IPCAKV3W_20220415_3_6_82_572011

(Fix camera signal problem)

572010 for the camera model: 5322-W

572011 for the camera model: 5323-W

please go to video manage page to confirm the camera model.

To upgrade the camera firmware: download the firmware from the dropbox, unzip the file at first, copy the correct file to your USB DISK root, format should be FAT32,go to system setup–channel setup—IPC upgrade page–click the correct channel–click start–remove mouse –insert USB disk–wait for camera upgrade successfully

I’ve connected everything, but the display doesn’t show images

Pls Refer to the following steps

1）Press the left mouse button for 30 seconds and the camera system will reboot.

2）A)You need use a VGA cable to connect the NVR to the monitor.

B)If you don’t have a VGA cable but have another monitor, you can connect the camera system to another monitor.

3）Then change the output resolution of NVR.(Right click the mouse>system setup>General setup>Screen setup>Output resolution)

Set an appropriate resolution and switch back to the original HDMI Cable.

4）If the display is still not displayed, you can choose another resolution.

if your NVR box version is 3.03.0 pls change the step 2 as below：

2) Then change the output resolution of NVR.(Right click the mouse>system setup>General setup>Display Resolution)

If camera often loses signal with NVR？

You can use the following four methods to solve the problem of poor camera signal

Please check if the white antenna on the camera is loose first.

1)First, you can change the wireless channel of the camera system to ‘other’, and the antenna of NVR is better to stand up

Right click > system setup > Network setup > change Wireless channel to “other” > Apply

Then restart the NVR, unplug the power supply of the NVR and plug it in again

2）You can replace the white antenna on the camera with the black extension antenna in the package, so that the black extension antenna passes through the wall.

Place the camera next to the NVR to ensure that there is a good signal between the camera and the NVR.

3）You can set a camera as a WiFi repeater to enhance the signal between the camera and the NVR.

4）You can also buy a WIFI repeater, which also enhances the signal between the camera and the NVR.

for Wifi repeater you can search: B07NRBYM5C on amazon.

If you can write a good rating to our camera system,We can send you one for no charge.

(warm notes:if your version is 3.0,there is “Search”button but not “refresh” ,click the “search” but the “refresh”)

(version 3.0)

How to use the wifi repeater to enhance signal

When the repeater is powered on, its indicator lights up.

Press the reset key for 10 seconds and it will deletes all previous matching records

How to use it on NVR.

1)Connect the repeater to NVR by Ethernet cable

2)click “Search” and then there will disappare a device which IP address is “192.xx.xx.xx”

Click it, it will pop up a new window

click Match button to let the status become “wireless has been matched”

At this point, you can unplug the Ethernet cable.

4) back to the Video Manage interface and click the Repeater .it will show the same window as the figure below.

click the add icon after the Router button,then select chanal which you want to enhance sigal

How to add an extra camera?

when you receive the new camera , there is no match between the nvr box and the new camera. You need to pair them.

if your camera with reset botton , no Ethernet port,

1)right click your NVR mouse and choose wireless add

2)press the camera reset botton for 10 seconds

3)wait it shows camera IP address 172.20.14.**

4)if no IP address, pls reset camera for several times, then you can exit,

below is the video for you check

https://youtu.be/Kaxvth-sd-Y

if your camera with Ethernet port, You can refer to our video on Youtube.

https://youtu.be/kmNnFgjLiPI

1) You need to connect the camera and the NVR box with the Ethernet cable.

2)Right-clik the mouse video manage→Refresh/search( find camera IP address as 192.168.1.**)→Match code( wait camera IP address changed to 172.20.14.**) then exit and choose add one

After camera and NVR are paired, you can unplug the Ethernet Cable.

3) Use the same way to pair more camera.

How to solve “Resolution too big”?

Our system upgraded , the “Resolution too big” camera is 3MP, old system can’t work with 3MP camera

1. right click your NVR mouse choose system admin–system version to check NVR version is 2.8 version or 3.0 version

2. if it is 3.0 version, you can upgrade it to latest firmware then it can support 3MP cameras (3.0.6.0 version and above version)

how to upgrade to NVR?

1) Online upgrade : go to system admin-system upgrade-then click online upgrade, wait for it upgrade successfully, then camera will show image

2) Offline upgrade, please email Johnny@hiseeu.com with your system version page , then she can provide firmware to you

3. if it is 2.8 version,the only way can fix is to upgrade camera firmware

right click your NVR mouse–system setup–system admin–IPC maintance, then take a screenshot of camera version, email : johnny@hiseeu.com for resolution too big problem.

4. after you get the firmware, please copy to your USB DISK root, format should be FAT32,go to IPC maintance page–click the correct channel–click start–remove mouse –insert USB disk–wait for camera upgrade successfully

5. go to system setup–channel setup–encode setup–find correct channel–change resolution from 2304*1296 to 1920*1080.

How to Change the Display Position of Channel

There are 2 ways to changed the position of camera

1)Generally speaking, we will choose four channels to display at the same time on the screen

For convenience, let’s first choose to have all channels displayed on the screen.

right click your mouse — Split Screen — X8 View

Now we want to let the Channel 7 to the Channel 2 position

left click the mouse on the channel 7 screen and dont loose

then move to the channel 2 position ,loose the mouse left key

that is OK

2)Please wrote down the IP address of the camera (which you want to exchange it channel,such as channel 5). Then deleted the channel which you want that camera to place(such as channel 2), did a manual edit on channel 2 ,Enable it and change or add the IP address of channel 5 wrote down. Camera immediately came up on channel 2.

App wrong Password

Pls refer to these step to solve the wrong password issue. refer this video : http://youtu.be/bFVwGqnr2Js

1)If you doesn’t change the User Name and the Password on NVR box.

The User name is ‘admin’, no password (you needn’t input anything)

2)For change the password on NVR box.

Right click the mouse>system setup> system admin>User>set password

3)User name and password should not exceed 8 characters and should not contain such as &*! @ (… #% and other special characters (you can setup password: jasmi985/ jasmi996/ jasmi856 or others. )

If you can login NVR with a password, but can’t login on App, please confirm that the password within 8 characters

Note：App login username and password are different from the camera login username and password. They are two different sets of username and password system.

How to set up Email notification?

a. Enable POP/IMAP in your email. If default setting of your E-mail enables that, please skip this step.

We also need to Allow 2-Step Verification for your Gmail account, login www.google.com

Open your Google Account.
Select Security.
Under “Signing in to Google,” select 2-Step Verification and then Get started.
Follow the on-screen steps.
Normally after you set 2-step verification, you will create a new password on NVR password page you need input this password

b. Go to your system main menu. System setting- Channel setting- Video Detection. Enable E-mail Notification and click Copy to apply the same setting to other channels.

b. Go to your system main menu. System setting- Network setting- Email setting. You will see the interface shown below.

c. Follow the instruction below to input the information required to finish the setting.

Email Notificaion: Check “Enable”

SMPT Provider: Click the one you use in the selection. Or click USER CUSTOMIZE to use the E-mail server that is not in the selection.

Sender : Type in your sender email address

Password: the password of login your sender emial address

SMTP service: when you choose the correct SMTP provider, it will suggest correct service to you

Port: The default port is 25. If it doesn’t work, you can go to the link below to get the port of the e-mail you use.

https://www.arclab.com/en/kb/e … .html

Encryption Type: Select the one that your E-mail server works. If there is no selection, please choose None.

Sendee 1: the email you want to receive email alerts

Sendee 2: the second email you want to receive email alerts, you can leave it blank

d. Then click Test see if you can receive a test e-mail alerts from Esee. If yes, that means the setting has set successfully. Then, please click Apply to save the setting.

e. Latest APP allow to set email notification on the cellphone directly

Go to cellphoen app Eseecloud, click me–settings–mail to receive alert messages–enable it, then put your gmail address, to get verfication code, after you input verfication code click confirm, then you will get the email notification, thanks

How to setup Record Plan?

You can set up three modes of record plan

Note：After you have set up the record plan, you need to click “copy to” to apply the record plan to all channels.

1) Time Recording:

Setup period of time of recording on NVR,Right Click the mouse>System Setup>Record Setup>Record Plan.

Click Time and put mouse icon on the upper left corner(for example 1 as picture shows).press and drag the mouse to the right to choose the time.the list will turn to red.

2) Motion Recording:

Only detect motion and then start recording. Right click mouse>System Setup>Record Setup>Record Plan.

Click Motion and putr mouse icon on the upper left corner, press and drag the mouse to the right to choose the time. The list will turn to green.

3) Alarm Recording:

Riht click the mouse>System setup>Record Setup>Record Plan.

Click Alarm and put mouse icon on the upper left corner,Press and drag the mouse to the choose the time,The list will turn to yellow.

Note: Users can Setup any period of time they want, for example 0:00:00-23:59:59, That’s 24hrs*7days recording. When NVR detects hard disk, the default setting will be 24hrs*7days recording.

The priority of Alarm is higher than that of Motion, and the priority of Motion is higher than that of Time.

When you have set the corresponding record mode, you can click “select all”, and the time area below will become the corresponding color

Video Playback

Right clik the mouse>Video Playback>Choose date、Channel、record mode>Click Search>then can view playback file

Note：You can only watch four Channels recording at the same time.

1. IIIustration for playback button:

play,

pause:

fast forward*2,*4,*8；

2. Play file: Choose the recording file in file list,as number“1”shown in picture. Chooseone of the recording, click“play”to play to recording file;

3. Video backup: Choose the recording file in file list,as number“1”shown inpicture.insert the U flash disk, click“video backup”to backup the file;

4. Timeline: Click“date”and“time”at left bottom to check the timeline of recording, as number“2”shown in picture;

5. On the timeline with recording file,left click the mouse, the can playbackthe file.

How to watch the playback on my phone?

First ,you should install the Eseecloud on your phone ，if you hadn’t installed it ,refer this link:

http://www.hiseeu.com/news/wirelessskitfaq/69.html

click playback

then it will show the interface follow below

choose the time and channel which you want to watch

Notes: The default is no sound when you watch playback.so you should click this sound button to open it if you want to hear

How to backup the recording

There are 2 ways to make backup

1) use USB disk to backup

1. right click your mouse, and choose video backup.

2. choose the channel/date/time playback you need backup,

(If you copy too much backup, we suggest you copy it one by one channel to save copy time)

3.Backup, the let your mouse out and within 30 seconds put the USB to get the backup

if you need check tbe playback you copy out on computer, pls use VLC player , you can download here :

http://download.dvr163.com/tool/Video-player%20.zip

pls notes USB disk format should be FAT32 otherwise your NVR may can’t find it.

2) make backup on computer

1. download Eseecloud :

Eseecloud MAC: http://download.dvr163.com/tool/EseeCloud-mac-2.0.8_20200228.zip

Eseecloud Windows: http://download.dvr163.com/tool/eseecloud/EseeCloud_Setup_3.0.7.10.exe

2. add the system to your Eseecloud phone account, then on computer software choose login cloud(login with the phone app Eseecloud account and password)

3. search the cameras playback, and choose the channel you want to make playback and wait for it shows the recording

4. click the download icon the chose the files you want to download, wait for it finished the process, then you can open the it and check the playback on computer

here is the video for you check : https://youtu.be/kR7QN_2UKdI

Factory Setting

Pls refer to these step below to reset system

1)Right click the mouse>System setup>System admin>factory setting

*Note: pls don’t check “Channel setup”&”Screen setup”&”Digital Channel”

Click “Apply”

2)If you Check “All”

After NVR Reboot,you need Right click again>video manage>Double-click the IP address of camera (like 172.20.14.2)

If Your NVR box version is 3.0.3.0

Pls refer to below steps

Right click the mouse>System setup>System admin>factory setting>simple restore

The standalone camera connection step

pls connect it step by step , if you fail , pls send us some screenshot and tell us which step is wrong by email or whatsApp

our email is :johnny@hiseeu.com

Wechat/WhatsApp:+86 13392810296

Skype:Johnny.chen1204

1) download “Eseecloud” app on your phone and register it

click add button and choose Standalone camera

2)check if the camera light lit

click this button

3) Point the camera of the mobile phone at the QR code of the camera

4）Choose a network environment for your camera, the WiFi name

5）input the wifi password and click the connecting device button

6) Wait a minute and it will connect succeed click COMPLETE button

7)edit the camera name and set its password(password can be empty )

that is finished! if you want change some camera information such as password, you can click setup button to set it

Here is video for you check how to connect it on phone app : https://youtu.be/tNKeWUfe-mI

How to fix there is no cloud ID

1. Connect the recorder to the same LAN as the computer ：connect to the router

2. Provide the IP address of the recorder, System Settings – Network Setup Photo

3. Recorder switching debugging mode: system setting – system management – system maintenance, right mouse click, pop-up dialog box, click the left mouse button in the blank space of this pop-up dialog box, right click, click the left and right button, 12 times, Find out if the font prompt toggles the debug version, click Yes, OK. Go back to the lower left corner of the main interface with a red font. Take a photo to us (2.8 version)

4. Provide remote tool ID and password, manufacturer technology remote connection control and send the email to us

if you don’t have the remotely tool, you can send the email to us, so we can send to you

(3.0.3.0 version)

3.Recorder switching debugging mode: right click your mouse—system setup–general setup–time setup–change the Date format–right click your mouse, pop-up dialog box ,

click the left mouse button in the blank space of this pop-up dialog box, right click, click the left and right button, 12 times, Find out if the font prompt toggles the debug version, click Yes, OK. Go back to the lower left corner of the main interface with a red font. Take a photo to us.

How to contact amazon customer service?

1). Use your Amazon account to log into www.amazon.com

2).Pull down to the bottom of this page and find “Help” button , and click on it to get into a new page

3). Find “Need more help ” in the middle of this page and move it to this button and you will see “Contact Us ” and click on it .Then you will get in touch with Amazon Customer Service Associate.

4).Or you may choose to call the Customer-Service by number 866-216-1072

Add Device (412 camera system)

First you need to connect the camera system to your WiFi.

Click the home button.

Select your WiFi and enter wifi password

This string of numbers is cloud ID.

Then go to “Eseecloud” app

Networked devices

Input your cloud ID and User name(User name is admin) and password(Camera system has no password by default)

5MP WK-4HB315-1T TZ-HB315 Night Vision is not good,upgrade as below

Please download the firmware at this link :

https://www.dropbox.com/s/gcrg3xw7f42ylys/IPCAKV5C_20221011_3_6_97_572110hsy%281%29.rom?dl=0

After you get the firmware, please copy to your USB DISK root, format should be FAT32,

Pls right click your NVR mouse–System Setup–Channel Setup–IPC Upgrade–Select the correct channel–click start–remove mouse –insert USB disk–wait for camera upgrade successfully

How to solve Most of Network Status Problem?

Please right click NVR mouse choose Fast Network check Network Status

Healthy network: Network connect successfully
Gateway Unreachable: means NVR IP Gateway and IP address not in the same gateway as your router, Click Manual Config, then find your router correct IP gateway, such as 192.168.1.1, then IP address should be 192.168.1.***, last numbercan’t be the same as your router, change it on NVR. If you connect with wifi network, you need go to System Setup—Network Setup—Wireless Internet page click View Details and click Manually to change those information.
Request DNS Error: disable DHCP, change the Preferred DNS to 8.8.8.8, reboot the NVR and router.
Network Cable Disconnect: make sure the NVR connect with router by Ethernet cable
Network Card Not Found: on Network Setup page find PPPoE disable it.
Network Busy: disable DHCP, change the Preferred DNS to 8.8.8.8, reboot the NVR and router.

The post HiSeeu Wireless Camera System installation guide first appeared on NVR IPCAMERA SECURITY.

How to Trigger the Linkage Between Ipc of TP-Link Kasa Via IFTTT?

M.Salih ASLAN — Wed, 02 Feb 2022 18:17:07 +0000

Here are the steps:

Download “Annke Nova“, register an account, log in to the APP, and then add an IP camera to the APP. Here is the net link instruction of how to add the camera to the Annke Nova app for your reference.
https://help.annke.com/hc/en-us/articles/360000253461
Download and install the “IFTTT” APP, then you can use your Google account, Facebook account, or register a new account for login.
Search “EZVIZ ” on IFTTT, select the EZVIZ module then login with your account. You should authorize IFTTT to access your EZVIZ account, and tap “Open” to enter the IFTTT.
Search “TP-Link Kasa” on IFTTT, select the TP-Link Kasa module then log in with your TP-Link Kasa account. You should authorize IFTTT to access your TP-Link Kasa account, and tap “Open” to enter IFTTT.
IPC of Nova Series triggers TP-Link Kasa by motion detection.
a). Link with IP Camera
Open the “My Applets” and tap the “+” icon on the top right corner on the EZVIZ main page, then tap “+this” to search and enter EZVIZ to select the trigger. Click “An alarm event occurred” and then select the device and the alarm type. Choose “Nova S” and “Motion Detection Alarm”, then complete the settings by tapping the top right corner “√“.

b). Link with TP-Link Kasa
Choose “+that“, then search and open “TP-Link Kasa“, select “Turn on” to connect Kasa. In the login page, then authorize to bridge IFTTT and Kasa. Enable the notification then you can tap “Finish” to complete the settings.

The post How to Trigger the Linkage Between Ipc of TP-Link Kasa Via IFTTT? first appeared on NVR IPCAMERA SECURITY.

Zosi DVR/NVR Firmware Software Tools DL

M.Salih ASLAN — Sat, 15 May 2021 08:53:37 +0000

DVR Upgrade Files

DVR Software

NVR Upgrade Files

NVR Software

POE Upgrade Files

Camera Upgrade Files

Camera Software

The post Zosi DVR/NVR Firmware Software Tools DL first appeared on NVR IPCAMERA SECURITY.