Our products and solutions have been deployed and used daily in more than 100 countries and regions, meeting customer needs in various vertical markets that range from residential to commercial, from healthcare to public safety.

Reset Device Web Password on Akuvox Cloud Platform

Users may forget passwords for logging into device web interface. Follow the steps to reset the web password when the device is connected to Akuvox Cloud.

Step 1

Log into the Akuvox Cloud platform with an installer account.

Step 2

To go to the device Info page, follow the steps.

On the Single-tenant Manager view

1. Click User on the left column.

2. Click the Device icon of the desired user.

3. Click the Info icon of the desired device.

On the Project Manager view

1. Select Community or Office on the left upper corner.

2. Click the Info icon of the desired community or office.

3. Click Intercom Devices and then the Info icon of the desired device.

Step 3

1. On the device Info page, click the Settings button.

2. On the Settings page,

Note

Factory Reset Akuvox Devices v2

Reset Door Phones through Physical Buttons

Note

Power up the devices before resetting them through the physical buttons.

S539, S532, X916 and X912

Hold the reset button with a pin and the device will be reset.

X915, E12 and DB01

Insert a PIN into the hole and hold it to reset the device.

E16, E18, E20 and E21

Remove the back cover of the door phone and hold the reset button to reset the device.

R27, R28, R29 and R20 Series

R27, R28, R29, and R20 series do not support resetting by pressing physical buttons.

Watch the video for other reset methods.

Reset Intercom 2-wire Kit Accounts for Single Tenants

Through resetting, the tenant information will be deleted while the device information will be retained after a tenant moves out. This saves time from repeatedly entering the device information.

Installers

1.Log into the SmartPlus Cloud platform with an installer account.

2.Click Role in the upper right corner to switch between single-tenant and community projects.

3.Click to reset the target user account.

After resetting, the following data will be reset:

The following data will be kept:

The following data will be removed:

Distributors

Distributors can reset the Kit users when the Kit is added directly to the single-tenant projects under the distributor account.

3.Click  to reset the target user account.

After resetting, the following data will be reset:

The following data will be kept:

The following data will be removed:

End Users

End users can delete the family master account on the indoor monitor.

After resetting, a new QR code will be issued to the indoor monitor from the SmartPlus Cloud.

On the SmartPlus Account screen, tenants can scan the QR code to register SmartPlus accounts themselves.

.

How to Configure and Modify the Password

The initial password “admin” is rather weak, easy to crack, thus we provide for you the password change service.

Before Start

The difference between the user mode and admin mode on the web page

How to configure

Website password modification

admin mode
Go to Security >Basic >Web Password Modify, choose user name as “admin”, click Change Password, then enter the old password “admin”, input the new password.

user mode
Go to Security >Basic >Web Password Modify, click Change Password, then enter the old password “user”, input the new password.

Device password modification

System code
System code is used to enter “More Interface”, to adjust the password: More>Settings>More, input the default system code “123456”, tap System Code, input the original system code and new system code.

Setting code
Setting code is used to enter “Settings”, and it is left blank by default. To adjust the password: More>Settings>More, input the default system code “123456”, tap Settings Code, leave the original settings code blank, input the new one.

Steps to Enter Device Web Interface

.

Factory Reset Akuvox Devices

Reset Device Web Password on Akuvox Cloud Platform

Users may forget passwords for logging into device web interface. Follow the steps to reset the web password when the device is connected to Akuvox Cloud.

Step 1

Log into the Akuvox Cloud platform with an installer account.

Step 2

To go to the device Info page, follow the steps.

On the Single-tenant Manager view

1. Click User on the left column.

2. Click the Device icon of the desired user.

3. Click the Info icon of the desired device.

On the Project Manager view

1. Select Community or Office on the left upper corner.

2. Click the Info icon of the desired community or office.

3. Click Intercom Devices and then the Info icon of the desired device.

Step 3

1. On the device Info page, click the Settings button.

2. On the Settings page,

Note

.

Check IP Address of Akuvox Door Phones

IP address(es) can be obtained on Akuvox door phones. With the IP address, you can log into the device web interface for configuration, troubleshooting, and more.

Devices with Numerical Keys or Touch Screens

Check the IP address on the system information screen.

Devices without Numerical Keys or Touch Screens

Check IP address through automatic IP announcement.

Note

You can also obtain the device’s IP address using the Akuvox IP scanner.

Download IP scanner:
https://knowledge.akuvox.com/docs/akuvox-ip-scanner?highlight=IP

Check IP Address of Akuvox Indoor Monitors

IP address(es) can be obtained on Akuvox indoor monitors. With the IP address, you can log into the device web interface for configuration, troubleshooting, and more.

The routes may vary by model.

In this part, C313 is taken as an example.

Exception

To check the IP address of S560, press the # key for about 5 seconds and the device will automatically broadcast its IP address.

Check IP Address of Access Control Terminals

Obtain IP Address via IP Scanner

IP scanner allows you to search the device IP address(es) and to perform targeted device reboot, reset, network setting, etc.

Note

Installation

1. Decompress the rar. file downloaded.
2. Double-click on the setup.exe file.

3. Go through the installation process.

a. Click Next to start the installation.

b. Check to accept the terms of the license agreement, and click Next.

c. Enter User Name and Company Name, and click Next.

d. Click Finish to install the IP scanner successfully. The software icon will appear on the desktop.

Obtain IP Address

Note

To obtain the device IP address, your personal computer should be in the same LAN as the device.

Additional Features

Apart from checking IP address(es), you can export device information and perform targeted device network settings and web interface access, reboot, and reset.

Note

Before applying the following changes, enter the User Name and Password. The default is admin.

Log into Device Web Interface

Enter the device IP address in a browser, and you can log into the device web interface for configuration, troubleshooting, and more.

.

<p>The post Factory Reset Akuvox Devices v2 first appeared on NVR IPCAMERA SECURITY.</p>

Troubleshoot Offline Camera

Troubleshoot Offline Camera

Learn how to troubleshoot when a new Verkada camera is offline

Updated over a week ago

Use this article to read through some common scenarios and try the suggested troubleshooting tips to help. If you still need help, please contact Verkada Support.

What is the LED status of the camera?

Camera has been solid orange for over 10 minutes

Camera is blinking blue for over 5 minutes

Camera is solid blue for over 5 minutes, says “waiting to be connected on Verkada Command”

Roles and Permissions for Cameras

Roles and Permissions for Cameras

Learn about the roles and permissions available for Verkada Cameras

Updated over a week ago

This article describes the set of roles and associated permissions for Verkada Cameras.

Org-level roles

Organization-level roles are configured on a per-user basis. Groups cannot be used to set organization-level roles.

Below, click the down arrow to the left of the role to learn more about the role and access.

Org Member

Org Admin

Verkada Cameras Troubleshooting 2024

Site-level roles

Site-level roles can be assigned to individual users or to groups and pertain to a specific site or subsite. Subsites inherit the permissions from the subsites and parent sites above them.

No Access

Site Live-Only Viewer

Site Viewer

Site Admin

CP52-E PTZ permissions

The CP52-E PTZ camera permissions determine who can manage the Sentry Mode feature.

Permissions model (example)

Here’s a simple example of a permissions model that a typical organization with several sites and users may employ:

Users and their required level of access

Permissions each user should be assigned

.

Set Org Admin permissions

Revoke Org Admin permissions

Set site and subsite permissions

You can set site and subsite permissions by adding a user, a group, or by existing users and groups.

Add a user

Add a group

Existing users and groups

You can set the site and subsite permissions for existing users and groups by managing the user roles or the sites.

Manage roles

Manage sites

Customize roles and permissions

Verkada’s Roles & Permissions Customization feature enables Org Admins the ability to add or remove certain permissions from Site Admins and Site Viewers more granularly. Some organizations may want to limit or extend the permissions of the members of their organization based on their needs. Currently, we allow customization of permissions related to archives, link sharing, and user management.

Roles and Permissions for Command

Roles and Permissions for Command

Learn about the roles and permissions available to Command users and groups

Updated over a week ago

This article describes the set of roles and associated permissions for Verkada Command. It also explains how to customize roles and permissions.

Permission levels

Permissions are set at the following levels:

Daha fazla göster

Permissions considerations

Common user permission configurations

Daha fazla göster

Roles and permissions by Verkada product

.

Org-level roles

Org-level roles are configured on a per-user basis. Groups cannot be used to set org-level roles.

Org member

Org Admin

Access Control Role

.

Site-level roles

Site-level roles can be assigned to individual users or to groups and pertain to a specific site or subsite. Subsites inherit the permissions from the subsites and parent sites above them.

No Access

Site Live-Only Viewer

Site Viewer

Site Admin

Access Site Admin

.

Customize Roles and Permissions

Verkada’s Roles & Permissions Customization feature enables Org Admins the ability to add or remove certain permissions from Site Admins and Site Viewers more granularly. Some organizations may want to limit or extend the permissions of the members of their organization based on their needs. Currently, we allow customization of permissions related to archives, link sharing, and user management.

FAQ

Why has my organization disappeared?

Why are cameras missing from my organization?

Why can’t I access certain features or settings, such as other users?

Resolve Issues with Missing Cameras

Resolve Issues with Missing Cameras

Learn how to resolve issues when cameras are missing from your Verkada account

Updated over a week ago

When you log in to Verkada Command, you can only access cameras and video in organizations or sites where your user account has permissions.

Note: Even if you are an Org Admin, you still need to grant yourself permission to view all sites. Learn more about roles and permissions for cameras and Command.

If you log in to Command and cameras are missing or have disappeared, always check user permissions. The most common reason cameras are not visible is that your user account needs permissions to the site(s) where the cameras are configured.

Common reasons that can cause cameras to disappear

Check permissions

If you are an Org Admin, you can check and correct your own permissions:

Resolve Issues with Night Mode

Resolve Issues with Night Mode

Common issues with IR and Night Mode with steps to resolve them

Updated over a week ago

Each Verkada camera has night vision capabilities, using a sensor to detect low-light situations. When external lighting is low, the camera switches to night mode and records in black and white, using infrared (IR) LEDs to illuminate the environment. If the IR is emitted improperly through the dome or reflected into the lens, it negatively impacts image quality.

Common night mode issues

It is imperative that the dome remain free of debris and the camera is installed properly to achieve the best image quality. When viewing footage in night mode if the footage appears obscured it is most likely the result of one of the following scenarios:

Camera always in night mode

If your camera is always in night mode even where there is sufficient light in the environment the lux (light) value may need to be adjusted. If this is the case, reach out to Verkada Support for further assistance.

Environmental obstruction

If the camera is mounted too close to a wall, ledge, or light source, the image quality may be degraded due to IR reflection.

Recommendation. Ensure that cameras are mounted sufficiently far away from surfaces that may cause the IRs to reflect, such as light sources.

IR obstruction

If a first-generation Dome camera (D30 or D50) is operating in night mode when there is plenty of light, the IR sensor is likely obstructed by the camera housing.

To fix the obstructed light sensor, physically rotate the lens barrel assembly 180° so the sensor and IRs are visible through the camera case.

Example: Proper and improper orientation

Note: After rotating the lens barrel, the camera orientation may need to be changed in Command.

<p>The post Verkada Cameras Troubleshooting 2024 first appeared on NVR IPCAMERA SECURITY.</p>

TetherX Camera Setup Guide v2, Tether your video surveillance, alarm panels, network infrastructure and other IP or Serial devices to the cloud. Monitor the health of your sites, cloud record cameras and integrate with third party services.

The steps required to set up Samsung Cameras / DVRs and NVRs

Setting Correct Profiles

Please ensure you have 2 profiles configured on your device:

IP Cameras

Cameras are the easiest to set up and should work out of the box. If the cameras are not working for any reason, please try one of the following for the Analytics Path and Recording Path:

Multi-Sensor IP Cameras & Encoders

If your device is a multi-sensor camera or an encoder, please set the Analytics Path as follows:

NVR – Network Video Recorders

DVR – Digital Video Recorders

DVR recorders setup is similar to NVR setup with the following differences:

.

Can I use TetherX alongside HikConnect?

Can I use Hik-Connect on my Hikvision cameras and recorders?

Yes.

Please make sure that stream encryption is switched off under Configuration > Network > Advanced Settings:

HikConnect stream encryption uses a proprietary mechanism which is not available to third-parties. Please note TetherX will encrypt the stream to the highest standards, for more information please see our security white-paper.

Note: If you are still getting a broken stream or no live view, please try updating the camera and/or recorder firmware to the latest. There are known issues that have been addressed by Hikvision.

.

Live View – Technical Implementation Details

How TetherX implements live view to be compatible with all manufacturers

Introduction

The quality, latency and smoothness of live view streaming is dictated by many factors:

Available Streams from Cameras

Typically cameras will provide 2 video streams as well as the ability to request a single image. These limitations dictate what is and isn’t possible when it comes to both recording and streaming.

💡 Note: More expensive and speciality cameras will provide additional video streams and custom streams of crops/de-warps of the same image (e.g. 180 or 360 cameras).

The streams are usually accessed through RTSP and the images through HTTP. For example:

Formats

Transcoding vs Proxying

TetherX supports both transcoding and proxying/packaging. The differences between the two are as follows:

Transcoding is a process of taking the stream from a camera, decoding it and then re-encoding it into a different format. This is the ideal method to hit a specific requirement of Internet bandwidth and viewing size, but it is in most cases cost prohibitive as you need power hungry and expensive hardware to achieve.

​For context, a TetherBox Pico capable of recording 10 cameras will only be able to record 2 if transcoding (you can enable transcoding in TetherX by editing a camera and switching to the advanced tab).

Proxying & Packaging is what is used in most cases, where the original video stream is maintained but is packaged into different containers, for example .mp4 for video recording and .ts for local and high-def live streaming (see streaming technologies below).
​

This means that ultimately, you are at the mercy of the camera/recorder. If you need to open 16 cameras and each one is 1mbit, but your upload speed is only 10mbit, it will simply not work because the stream size cannot be adjusted without either:

Video vs Images

TetherX use a combination of images and video to achieve different goals. It is important to understand the differences and advantages/disadvantages of each, which in turn dictate when either is used in TetherX.

The main difference between image and video compression is every image is self contained, where every video frame is part of a stream. While you may skip an image, skipping a frame in a video stream leads to parts of the image breaking / disappearing:

Systems that ignore broken/skipped data (e.g. streaming over UDP) will show a broken image while many systems will simply show a loading spinner while they wait for the next key frame (which is controlled by the key-frame interval set on the camera/recorder, typically set to 1 second, or the same number as fps, but sometimes much longer).

Because each image is self contained, it is typically 5 to 25x larger in bitrate vs video at 25 images per second. It may initially seem obvious that video should be used when accessing remotely, however there are certain important underlying trade-offs that make it a much tougher question which needs to be evaluated on a case by case basis, according to the following:

Advantages of Images

Live View Streaming Technologies

TetherX uses all mainstream streaming technologies available and choses between them depending on the specific requirements and constraints:

How TetherX Does It

TetherX supports most streaming technologies and switches between them depending on context.

When local streaming (the TetherBox is able to detect if you are on the same network), if we are viewing less than 10 cameras simultaneously TetherX switches to LHLS (see above) to show the primary video stream from each camera at full resolution/frame-rate (assuming your viewing device is capable of displaying this many streams). If this is not working well for you, you are presented with a toggle to switch off High-def streaming to fall back to loading images.

When full screening a camera (double tap/click a camera), we assume you want the higher quality and we switch to the full primary stream. If your connection is not able to sustain this stream, we automatically fall back to loading images.

When viewing multiple sites / cameras over Internet in record mode, we switch to image viewing but we transcode/transize the images depending on the size of each live view box on your screen. This ensures that you are able to view many simultaneous cameras, the latency is lower than video, it automatically adapts to the available bandwidth and it does not impact recording quality. This does however mean a lower fps.

When viewing multiple sites / cameras over Internet in monitor mode, we proxy the connection directly to the image provided by the camera. This leads to a further lowering of fps but ensures the TetherBox can monitor the health of and provide live view of 10x more cameras than in record mode.

Learn more about using Live View in TetherX here.

How Hikvision iVMS Does it

Because of the constrains outlined above, in order to show smooth video in iVMS (and Dahua PSS) software, if the connection speeds both on site and viewing device cannot accommodate the streams, the software temporarily reconfigures the cameras to send a lower bitrate stream while keeping the resolution the same.

💡 Note: if you happen to kill the software at this point (or lose connection), this can cause the camera to permanently record in lower quality.

Because many cameras or recorders only support a single stream at above D1 resolution, this means that not only is the live view quality reduced, but also the video being recoded which can lead to losing critical video evidence.

In our testing, limiting the connection to 5mbit 200ms upload and streaming just 4 cameras in HD resulted in blocky and usable footage being recorded on the NVR. It also took over 10 seconds to get an initial image, however the motion was smooth (25fps) once loaded.

In comparison when using images (outside of the iVMS/PSS software), the images loaded almost immediately, the image quality was significantly higher, but the frame-rate was poor (3-4fps) – still sufficient for making decisions in a control room setting, but understandably disappointing in smoothness by comparison. (Note: higher fps can still be achieved by full screening a single camera on demand).

When viewing a smaller number of cameras from the same manufacturer on a single PC or phone, it looks impressive to have smooth 25fps video on iVMS/PSS/others. However, when dealing with 100+ or even 32 cameras, from different manufacturers, different firmware versions, with multiple users, across multiple sites, with differing and fluctuating bandwidths, you begin to appreciate the trade-offs and advantages/disadvantages of each approach.

💡 Note: This approach of custom code to adjust Hikvision camera settings to achieve smoother live view is only suitable if you do not care about recording quality and you are optimising for a single manufacturer with compatible models/firmware.

​TetherX is an open platform with a focus on convention over configuration, we prioritise the integrity of recorded footage above live view and we implement approaches that work across all recorders/cameras as well as viewing devices.

.

Uniview / UNV Camera Setup Guide (for use with TetherX)

Using TetherX with Uniview / UNV Cameras

Summary

Uniview or UNV cameras should work out of the box in most cases. However please note depending on the age of the camera and firmware versions, the RTSP path may be different.

Please try the following paths:

3. Open the Advanced tab and enter the required Analytics Path and Recording Path. Please try all the paths given as examples above.

.

Camera Setup Checklist

Adding IP cameras to TetherX Please note your camera may have a different interface and options may be located in a different part of the interface. Please refer to the camera manual if you are not able to find the relevant option.

Network

Set a Static IP

Set camera to unused IP on 192.168.88.x network
set DNS/Gateway to 192.168.88.100

Important: Although it’s possible to configure your camera with DHCP, and TetherBox is capable of detecting any IP changes, we strongly advise against this practice for security reasons. This setting can potentially allow the camera to connect directly to the internet, raising a range of security issues. These include unauthorised access through back doors, or the risk of security holes in the camera’s firmware if it’s not updated regularly.

Video & Audio

Recording Stream (primary)

Analytics Stream (secondary)

Conditions

.

Audio (optional)

Date & Time

One option is to disable time from being displayed in the camera at all. You generally do this under OSD settings. If you do wish time to be displayed in the image, you need to set the following:

<p>The post TetherX Camera Setup Guide v2 first appeared on NVR IPCAMERA SECURITY.</p>

We offer a wide range of security cameras for different application. These security cameras adopt two megapixel progressive scan CMOS image sensor and high performance SoC to deliver 1080p FHD resolution video. Depends on your choice, most of them are embedded with Tuya Internet of Thing platform which provides the P2P connection, a few of them are empowered by Yoosee cloudlink platform.

The P2P connection just performs as the bridge between your smartphone and the connected security cameras. This eliminates the sophisticated procedure to setup the cameras, there is no need to tweak your router to do port forwarding or apply DDNS rules. All of camera has a microSD/TF card slot design to support up to 128GB video recording capability. Users can play the video on their iOS and Android devices remotely, no need to take the card out from the cam. Additionally, it supports motion activated recording, schedule recording, 24 hours full-time recording different modes.

They are smart cameras supports Wi-Fi connection, ensuring you connect them to 2.4G band Wi-Fi, as they currently don’t support 5G band. It’s sure that they work with your dual-band routers. All of them supports motion detection, when detecting the presence of intruders, users can get informed immediately through push notification. Some advanced models integrate with Passive Infrared (PIR) motion sensor to improve the accuracy of detection and avoid false alarms.

Outdoor security camera: adopting full-sealed design to support ingress protection grade IP66 waterproof and dustproof design, they are suitable for outdoor installation. PT camera supports pan/tilt rotation, you’re able to rotate the camera on your smartphone, hence the camera can cover a large area.

Indoor security camera: affordable indoor security cameras adopt aesthetic design, modern and small size, they supports both desktop and wall mounted or ceiling mounted installation. Supporting wireless network connection can be feasibly installed. Some cameras are powered by rechargeable batteries (typically 4.7V 18650) to offer completely wire-free installation. They’re plug&play cameras support quick DIY installation, no trenching and wiring.

Baby monitor: cute design small size indoor security camera, both parents and children loves them. Built-in microphone and speaker, parents can chat with their children. Privacy-protection design, the camera can rotate to the position where can hide the lens to stop video monitoring.

.

.

Smart Life and Tuya APP

The camera can be connected to either the Smart Life or Tuya smart app, both of which have the same function, so just choose the app you use regularly.

How To Connect Smart Life or Tuya Camera?

There are 2 ways to add a Smart Life and Tuya camera, we recommend using ‘OR Code’ to add a camera.

Before adding the Smart Life and Tuya camera, please connect the camera to the power supply, if it is a battery camera you will need to turn on the power switch.

Once the camera has been powered up wait for the camera to start up (about 20 seconds) and then you can start connecting the camera.

OR Code connect camera

We recommend using OR Code to connect Smart Life and Tuya cameras.

1. Click on the ‘+’ icon, select ‘Camera & Lock’ and Smart Camera (Wi-Fi)

2. Click Make sure the indicator is flashing quickly or a prompt tone is heard, then click Next

3. Enter your wifi password, then click Next.

4. Hold the mobile phone screen in the front of the camera, the distance between the two should be 15 to 20 cm, Try not to shake the mobile phone during the scanning. when you hear ‘Connect Router’, click “I Heard a Prompt”, and wait for connecting.

Note

If it is a mini battery camera, there is only an indicator light, no voice prompt. Please check your operating instructions for the indicator light.

5. wait for the camera to connect to wifi ( approx. 30 seconds)

Wi-Fi Mode connect camera

Not all Smart Life and Tuya cameras support Wi-Fi Mode connectivity, please contact your camera’s seller for details.

1. Click on the top right corner to switch to Wi-Fi Mode, then click on the Next step.

.

See also  Smart Life and Tuya camera Troubleshooting: Fix WIFI, Reset, Offline, and camera not working issues

.

2. Select AP Mode, enter your wifi password and click Next.

3. Click Go to Connect, connect to the camera’s hotspot wifi, then return to the Smart Life or Tuya APP.
wifi name: SmartLife-XXXX or SL-XXXX

4. wait for the camera to connect to wifi ( approx. 30 seconds)

Troubleshooting

Why can’t the Smart Life and Tuya camera scan the QR code?

1. Ensure that the lens is not blocked. If the camera lens has a protective film, remove it before you scan the QR code.
2. Place the app QR code in front of the camera at a distance of15 cm to 20 cm.Adjust the angle and distance until you hear a prompt.
3. If it is a battery camera, please check the status of the indicator
4. Reset the camera, resetting the camera will restore the camera to factory settings.
5. Try to connect to the camera using Wi-Fi Mode

Why can’t the Smart Life and Tuya camera connect to wifi?

If you have any problem with adding camera to the app, please refer to the following steps to troubleshoot:

How can I get Smart Life and Tuya camera connected to another Wi-Fi?

If the current Wi-Fi of the camera and Wi-Fi you would like to switch can be connected at the same time, you can switch the Wi-Fi directly by selecting Wi-Fi Network in the interface of Setting.

If the camera is disconnected to the current Wi-Fi, the App will say “Device disconnected”. You can reset the camera and reconnect it.

Why can’t I connect to the Smart Life and Tuya camera?

If you can’t connect to the camera, usually due to a wifi problem, you can try resetting the camera and reconnecting it. It is recommended to connect next to the router.

Why does App shows the camera has been bound to another account?

There are the following possible reasons for the camera prompting that it has been bound by another account during network configuration:

Unbinding method:

How to set up Smart Life or Tuya camera?

If you can’t find certain settings on your Smart Life or Tuya camera, then your camera doesn’t support this feature and you are advised to contact your camera seller for details.

Share Camera

You can share your Smart Life or Tuya camera with your family or friends to use the camera for multiple people.

The other party needs a Smart Life or Tuya account to use the camera, and can only share the same app.

1. Click on the icon in the top right corner to enter the settings screen, select Share Device, click on Add Sharing.

2. You can enter the shared account number or copy the link to your friend or family member, who can then use the camera.

Recording setting

You need to insert the memory card to see the recording settings.

Click on Recording settings, open Local Recording.
By default, the camera is in Non-Stop recording mode, you can change the Recording Mode.

View recording video

In the live video screen of the camera, click on Playback to view the video on the memory card, the coloured time indicates the recorded video.

Click on the ‘‘date icon, you can select the recording date. By default the sound is turned off, click on the ‘‘ in the top right corner to turn on the video sound.

Save recording video to your phone

Click on the record icon, you can save the video to your phone.

Detection Alarm Setting

Click on Detection Alarm Settings, turn on Motion Detection Alarm and the app will send a notification to your mobile phone when the camera detects a moving object.

If there are frequent false alarms, you can adjust the detection sensitivity and turn on Human Body Filtering to reduce false alarms.

Detection area

If you don’t want to detect the whole frame, you can select a specific area,Drag/Resize the red frame to set an detect area.

Siren Sound

When the camera detects motion or sound, the camera will make a Siren sound.
You can turn on Trigger Siren in Detection Alarm Settings, and adjust the sound timing and volume in Siren Adjustment.

Motion Tracking Setting

Motion Tracking can follow objects automatically. You can turn on Motion Tracking in the Detection Alarm Settings.

Basic Function Settings

In Basic Function Settings, you can switch on and off the camera’s Status Indicator, Flip Screen, Time Watermark and Talk Mode.

Voice Intercom Settings

The Smart Life or Tuya camera has two voice modes, speech may be affected by the environment. We recommend that you select one-way or two-way speech according to the actual situation.

Controlling camera movement

You can swipe the video screen to control the camera movement, or click the Direction control button

Quickly move the camera

In the Site screen, click on Site added succe… Save the camera’s current location, so that you can move the camera to the saved location quickly by clicking on the picture.

Common Problem

How to watch the Smart Life and Tuya camera on TV?

if your TV is a smart TV and you can search for the app you are using in the TV’s App Store, you can download and use this app to stream your camera video to the TV;
If the app you are using cannot be searched in the TV’s App Store, it means that this function is not supported at the moment.

.

How to turn on the camera motion detection function and adjust the sensitivity?

Please see Detection Alarm Setting.
If motion detection is often delayed and unable to capture moving objects, it means that the network in your home is poor or the connection delay with the cloud server is high.
If it still does not take effect, it is recommended that you remove the device and add it again, and perform the above steps again.

.

Can multiple people use a Smart Life or Tuya camera simultaneously?

Yes, you can share the camera with your family or friends.

.

Does the Smart Life or Tuya camera support NVR or DVR function?

Not all camera devices support the NVR and DVR functions. If your device supports it, you can find the option to set the NVR and DVR function in the device’s setting page. If there is no option to set the NVR and DVR function, it means your device does not support NVR and DVR functions.

If your camera supports ONVIF or RTSP, you can connect an NVR.

.

How can I enable the camera to turn on/off the motion detection function at the time I need?

You can set the timer to turn on or off in Detection Alarm Setting > Schedule

.

<p>The post Tuya Camera User Guide Ultimate Manual first appeared on NVR IPCAMERA SECURITY.</p>

You can connect your compatible Amazon Echo, Echo Show, Fire TV, or Fire Tablet to your Ring device and use Alexa voice commands to do the following (and more):

*Ring Alarm and all Ring Alarm accessories require a subscription for digital notifications, in-app features, digital arming/disarming, and integration with other Ring, Echo, and third party products. Subscription sold separately. View ring.com/protect-plans for pricing and details.

See which Alexa-enabled devices are compatible with Ring

.

Connect your Ring device to your Alexa-enabled device

First, you’ll need to download the Alexa app on your mobile device or tablet. Get the Alexa app from the Apple App Store (iOS devices), or the Google Play Store (Android devices).

You may also need to update your mobile device’s operating system.

If you already have the Ring app you’ll need to ensure you have the latest version. 

Next, follow these steps to add Ring as a Skill in the Alexa app:

Note: If your Ring devices do not appear after you tap Discover Devices, you can say, “Alexa, discover my devices,” or tap the Devices icon at the bottom right corner of the Alexa app.

Connecting Amazon Alexa-Enabled Devices with Ring Devices

Read More : Ring Alarm Setup Guides and Manuals

Activate chime notifications on your Alexa-enabled device

Once you’ve connected your Ring doorbell to your Alexa-enabled device, you can set up chime notifications to get an alert on your Echo or Fire TV device when someone presses your doorbell.

Follow these steps to get Chime Notifications:

Note: Make sure each Alexa device you enable for Chime Notifications has Communication and Announcements enabled and the Do Not Disturb feature turned off in the Alexa app.

.

Activate Ring Intercom notifications on your Alexa-enabled device

Once you’ve connected your Ring Intercom to your Alexa-enabled device, you can set up Ring Intercom notifications to get an alert on your Echo or Fire TV device when someone buzzes your Ring Intercom.

.

Answer the door or Ring Intercom with Alexa

After you’ve connected your Ring doorbell or Ring Intercom to your Alexa-enabled device, you can answer the door and speak to your visitors through your Echo or Fire TV device.

To speak to your visitor, you can say:

.

Configure unlock by voice for your Ring Intercom

Follow the steps to enable unlock by voice and create a voice code

.

Unlock your building entrance using Alexa with Ring Intercom

To unlock the building door using Alexa, say Alexa, unlock [Ring Intercom Name]. Alexa will then ask you for your voice code to complete the action.

.

.

Get Live View from your Ring camera with Alexa

If you have an Echo Show, Fire TV, or Fire Tablet, you can use Alexa commands to view the live video stream from your Ring doorbell or security camera.

To get a live view from your Ring camera, you can say:

To stop the live video feed, you can say:

Note: “Front Door” is an example and may differ from the location labels that you assigned to your device(s) during setup. Other examples – backyard, side door, garage, etc.

Read Next  :Reolink NVR Setup Guide

Arm and disarm your modes

You can ask your Alexa-enabled device to change the mode to disarmed or armed* for your Ring devices, including cameras and Ring Alarm.

*Ring Alarm and all Ring Alarm accessories require a subscription for digital notifications, in-app features, digital arming/disarming, and integration with other Ring, Echo, and third party products. Subscription sold separately. View ring.com/protect-plans for pricing and details.

Click here to learn how to arm and disarm your Ring devices with Alexa.

To learn more about Ring Modes, click here. 

.

 Control which Alexa devices can access Live View on your Ring devices

Once you’ve connected your Ring device(s) to Alexa, you can change which Alexa devices have access to Live View at any time in the Ring app.

Note
If you enabled the Ring Skill on an Amazon/Alexa account that is not linked to your Ring account, the Alexa devices will not be listed here. If you wish to remove access to your Ring account for those Alexa devices, you can do so from the associated Amazon/Alexa account.

.

Ring and Alexa troubleshooting tips

.

Downloading and Updating the Ring App

Learn how to download the Ring app and update your mobile device’s version of the Ring app. 

Downloading the Ring app for your mobile device

The Ring app is available for phones and tablets in the Apple and Google Play stores.

You can also visit ring.com/app to directly download the Ring app on your mobile phone.

Learn how to create a Ring account

Updating the Ring app on your mobile phone

For the latest features and fixes, make sure to update the Ring app to the latest version. To get started, choose your mobile device’s operating system below:

Troubleshooting your Ring app update

If you’re having trouble getting the latest version of the Ring app, here are a few things to try. 

Make sure your mobile device is on wifi.
If you have poor cellular signal, your mobile device may be pausing your update until it’s on wifi. Try connecting to a wifi network.

Make sure your mobile device has enough storage.
For apps to update, most mobile devices require 3-5 GB (gigabytes) of space. Try backing up your photos and videos to the cloud, or uninstalling apps you don’t use.

Confirm your mobile device is compatible to update.
If you have iOS 13 (or lower) or Android 8 (or lower), your mobile device’s operating system may be unable to use the Ring app. Since the release of these operating system versions, we’ve made significant security updates to help protect your Ring account. 
Learn more about Compatible Mobile Devices

Restart your mobile device.
Sometimes phones and tablets just need to be restarted. After restart, attempt to update the Ring app again in your settings or app store.

Uninstall and reinstall the Ring app. 
If you uninstall the Ring app on your mobile device then reinstall the Ring app from your app store, you will download the latest version. Don’t worry, you won’t lose access to your Ring videos, settings, and Event History.

Note
If your mobile device is operating on iOS 13 (or lower) or Android 8 (or lower), you may not be able to reinstall the Ring app.

Arming, Disarming, and Setting Modes on your Ring Alarm

Arming, Disarming, and Setting Modes on your Ring Alarm

Security modes

These three modes on your Ring Alarm will protect your home in different ways. You can switch between them depending on your needs.¹

Disarmed Mode

In this mode, no sensors in your home will be monitored and no alerts will be sent to the monitoring station. Your Alarm system will still be powered on and functioning.

Use this mode when you’re at home and want the freedom to easily go in and out of your house. Fire and CO sensors (if they are attached to the system) will still be monitored.²

Home Mode

In this mode, only your perimeter sensors (doors and windows) will be monitored. Use this when you’d like to move freely inside your home. You can control which sensors are monitored in Home Mode by setting them in your Ring app:

Away Mode

In this mode, all your sensors are monitored and an alert is issued if any of them are triggered. Use Away Mode to secure your home when you’re leaving it and will be out. You can control which sensors will be monitored in Away Mode by setting them in your Ring app:

¹ Ring Alarm and all Ring Alarm accessories require a subscription for digital notifications, in-app features, digital arming/disarming, and integration with other Ring, Echo, and third party products. Subscription sold separately. View ring.com/protect-plans for pricing and details.

² A compatible Ring Protect subscription is required to enroll in the Ring Alarm professional monitoring service. Professional monitoring service is available only within the U.S. (all 50 states, but not U.S. territories) and in Canada (excluding Quebec). Ring does not own its own professional monitoring center. Smoke and carbon monoxide monitoring is not available for a business or commercially zoned address. See Ring alarm licenses at: ring.com/licenses. Additional permit or false alarm fees may apply depending on your local jurisdiction. Additional charges may apply in areas that require permits or guard response service for alarm verification.

Arming your system

To arm your system using the Ring app¹

To arm your system using the Alarm Keypad

When you’ve changed your mode, your Alarm system begins a countdown. This is an Exit Delay, and it gives you time to leave your home before the system arms itself.

You can set an Exit Delay of 0 to 180 seconds:

¹ Ring Alarm and all Ring Alarm accessories require a subscription for digital notifications, in-app features, digital arming/disarming, and integration with other Ring, Echo, and third party products. Subscription sold separately. View ring.com/protect-plans for pricing and details.

Disarming your system

To disarm your system using the Ring app¹

To disarm your system using the Keypad

When you enter your home, your Alarm system begins a countdown. This is an Entry Delay, and it gives you time to disarm the system before it goes off.

You can set an Entry Delay of 0 to 180 seconds:

¹ Ring Alarm and all Ring Alarm accessories require a subscription for digital notifications, in-app features, digital arming/disarming, and integration with other Ring, Echo, and third party products. Subscription sold separately. View ring.com/protect-plans for pricing and details.

Panic alarm

This feature lets you send a panic alarm to the monitoring station anytime. To turn it on, press and hold the ✓ and X buttons on the Keypad simultaneously for 3 seconds.

The Keypad will then send an instant alarm signal to the hub, the Keypad LED Ring will quickly blink red three times, and the speaker will play the panic alarm sound.

.

<p>The post Ring Devices Amazon Alexa Connecting Guide first appeared on NVR IPCAMERA SECURITY.</p>

How to upgrade older TKH Security Firmwares

The latest 360v2-series cameras firmware carries “UX“ in its firmware filename, where previously “U“ was used. This change is minor and does not mean much with regards to the functionality of the firmware. However, some older “U” do not allow direct upgrade to the latest “UX“ firmware.

In these cases, an intermediate step must be taken: first upgrade firmware to the nk20210916UX version; after this, the camera will allow the firmware upgrade to the latest version found on the public download pages.

This intermediate firmware version nk20210916UX can be downloaded from here:

https://tkhs-install-files.s3.eu-central-1.amazonaws.com/Siqura/Firmware/360v2-series+(U)/360v2-series+fixed+(nk20210916UX).zip

Load More :

1. Using Your Uniview NVR
2. How to set up Zosi POE NVR System
3. Spot AI IVR Installation Guide

Where can I find the latest firmware?

The latest firmware can you find on our website. Click here

When you can’t find the firmware for your product or you need another version.
Please contact us: support.nl@tkhsecurity.com

*How to update iProtect™ to 10.1

How to update the iProtect™ Application.

Download the latest files on our download section of the knowledgebase:

*iProtect™ – Software Downloads | Version 10.1 and lower:

Prechecks

Before the update it is required that the state of the system is known. Not functioning readers, nodes and lines must be noted.

Compatibility and discontinued hardware/software is noted in the release notes:

https://tkhsecurity.atlassian.net/l/cp/Co1YADGz

Minimal requirements:

• Firmware inbraak (Unii 2.4.0 / ML 5.0.5 / XL 3.11)

• Rootfs Pluto’s (5.68a)

• Firmware polyx (UBIFS)

• Diva/Sense (2.5)

Update

Download the Backup from the maintenance page.

Upload the new iProtect™ version at the maintenance page

• Go to the iProtect™ maintenance page (Click on the gear button on the login screen)

• Install > Upload iProtect (1)

• Click on the “…” button and select the new iProtect™ version at the maintenance page and click on the “Post” button.

When the “Check requirements” button appears, press it and a check will be done. Check the log and see what is needed to continue. This is also a good moment to install the ServicePack.

Click on the “…” button and select the ServicePack you want to install and click on the “Post” Button.

You can follow the installation process at the realtime logging, the Apache2 web server will restart multiple times, this will cause an interruption of the iProtect™ Gui and maintenance page.

You need to wait (10 minutes max) till you see the message below in the Realtime logging.

iProtect™ atlas: Installation ServicePack … finished.

Sometimes a reboot of the server is required, you will see a notification of this in the messages.

Install the new iProtect™ version at the maintenance page 

• Click on the “Check Requirements” button.

• if the check is passed you get a “Start Upgrade” button and can start the update by a click on this button.

You can follow the installation at the User interface logging, if you see the messages below the Gui is ready and you can login in iProtect™ again (only the root user can login at this point)

You must delete browser history before logging in to iProtect.

Installing the new license if iProtect version was < 10.1:

https://tkhsecurity.atlassian.net/l/cp/51UgXjhX

If a new license is needed, please contact our orderdesk.

Activating lines

To be sure all lines and nodes gets the latest software, select the system default Provisioner group.

• Go to iProtect™ menu option Installation > Hardware > Line

• Select System default at the Provisioner group options.

The components under the line config will automatically be provided with the latest firmware version.

Activate the line’s now, the Door controllers will get the new software and start with the installation automatically. The doors will be non-functional for 5-10 minutes. Open doors beforehand if they are critical.

Finishing the update

When all lines are updated and the re-index message is gone, you can finish the update with the button in the menu:

Installation > Database restore > Activate line

Some points to check:

• Readers

• Database couplings

• Client login (remove browser cache)

• Import / Export

• iNVR

• Printing badges/cards

• Intercom

• browser certificate

Camera firmware

Encoder firmware

<p>The post TKH Security Firmware Software Guide first appeared on NVR IPCAMERA SECURITY.</p>

How To SetUp JXLCAM Camera (Ultimate Manual)

This article describes in detail how to use JXLCAM camera, including how to connect JXLCAM camera, function settings, etc.
It is suitable for all JXLCAM cameras, such as mini cameras, bulb cameras, indoor and outdoor cameras, etc.

Start the JXLCAM camera

Press the power button to start the JXLCAM camera. After starting the machine, the blue indicator light flashes continuously and quickly, and the camera enters the state to be connected.

Note: If the blue indicator is slow flashing/always on or cannot be connected, long press the reset button for 5 seconds to reset.

Install JXLCAM APP

Download and install JXLCAM APP, during installation, you need to open all permissions of the APP, otherwise the APP will not work properly.

Connect the JXLCAM camera to the phone

Read Next :

1. XMEYE NVR Installation Guide
2. XMARTO NVR WiFi PTZ Camera System FAQ
3. How to use VPN on Milesight Network Camera

Local mode

When there is no WiFi in the environment, AP mode can be used for connection. The effective distance of this mode is no more than 10M.which can realize localized video viewing.

Open your phone’s WiFi list and connect to B/xCCQ……. After success, open the APP page and click AP as shown below to watch the video.

Remote mode

1. First, confirm that there is available WIFI signal near the device, turn the device on, the blue indicator light flashes quickly, and the device enters the state to be connected. (Note: only support 2.4G band WIFI signal)
2. Unable to connect successfully when power is low.
3. When connecting to the network, place the device as close to the router as possible. If the nearby available WiFi signal is weak, the connection cannot be successful or the screen will be closed after successful connection.
4. open the APP JXLCAM and follow the steps below

1. Click ‘+’

2. Click “AP add Camera”

3. Click “…” to connect to the local 2.4G WIFI band, enter the password. and then go to the next step.

4. Click”… “to connect to the camera WIFI hotspot and add the camera

5. Click”Cancel”

6. Waiting for the connection.

7. Click”Next”

8. You can change the name or not, and then click “Next”

9. Check out the video preview on the home page

JXLCAM APP interface description

JXLCAM FOR PC

JXLCAM App is developed by the JXL.Inc. JXLCAM is the app for security cameras. Now guys if you want to use JXLCAM on the PC so, You can follow some easy steps and it will be easily installed on your laptop PC

Install JXLCAM on PC

Now Here we will going to install JXLCAM on PC, for that you have to install Bluestacks on your PC. Bluestacks is and professional android emulator to run android apps on the PC or MAC. After installing bluestacks in your PC, you can easily run any of Android apps on your PC including JXLCAM APK

So, first install Bluestacks and then you install JXLCAM in the Bluestacks emulator.

How to install the JXLCAM app on Windows and Mac

Go to the below link and download JXLCAM for PC or MAC and before that make sure to check the below minimum system requirements for installing Bluestacks on your PC to use JXLCAM.

Minimum System Requirements:

• OS: Microsoft Windows 7 and above.
• Processor: Intel or AMD Processor.
• RAM: Your PC must have at least 2GB of RAM. (Note that having 2GB or more disk space is not a substitute forRAM)
• HDD: 5GB Free Disk Space.
• You must be an Administrator on your PC.
• Up to date graphics drivers from Microsoft or the chipset vendor.

Download Bluestacks

After you install bluestacks, then you can install JXLCAM APK in Bluestacks. so follow the few steps given below to download and install JXLCAM on your MAC or PC using Bluestacks.

1. Open the browser or google play to install the application
2. Open your browser and type in [ https://jxlcam.com ] and download JXLCAM APK
3. After JXLCAM download is complete.
4. Just open the .apk file and install it as a normal .apk file
5. Now, if you go to the bluestacks home screen, you will see the JXLCAM APK installed
6. Just open the JXLCAM app and use it
7. Now you can enjoy JXLCAM on your PC or MAC APK

FAQ

Is there any EXE or dmg software for JXLCAM?

No, to use on the computer, you can only install the APK mobile version.

JXLCAM

Jxlcam is an app that works with home surveillance camera devices

1. The monitoring of the specified device uid can be viewed only by connecting to the specified device uid
2. No matter where you are, you can view the monitoring anytime, anywhere
3. It supports capturing screen photos and recording videos and saving them locally
4. Support monitoring camera equipment and intercom with camera equipment
5. Support SD card video playback function

Android

iPhone

For PC

<p>The post How To SetUp JXLCAM Camera first appeared on NVR IPCAMERA SECURITY.</p>

What is Hikvision AcuSense?

By minimizing false alarms triggered by animals, falling leaves, heavy rain, and other moving objects, AcuSense enables businesses and homeowners to focus security resources on real threats.Easy and affordable Artificial Intelligence has come to the mass market and a diverse set of users. Read on to learn more.

Hikvision AcuSense

Read More :

• How do I stop my Hikvision NVR from beeping?
• Hikvision Hik-Connect complete setup guide
• New Hikvision Hilook Firmwares 2022

INTRODUCTION

Demand Analysis

In traditional CCTV systems, all the moving objects in the picture will trigger the perimeter alarm, which may generate a lot of false alarms. Users have to waste a lot of time dealing with false alarms, and the alarm is unreliable. In addition, when the target needs to be found in the video, it needs to be manually searched by video playback, which is time consuming and laborious, and it is easy to lose key targets, which is very inconvenient.

After solving the basic monitoring and video problems, users need to receive more accurate alarms and to have a more convenient target search function to better use the monitoring system.

Solution

Some false alarms can be filtered by using a thermal camera, vibration optical fiber, radar, and other equipment. The cost of the whole system is too high, and it cannot meet the requirement of finding the target quickly afterwards.

With the development of artificial intelligence, target classification can be realized directly based on the video screen, and false alarm reductions and target retrieval can be provided, which can provide users with very cost-effective schemes.

System Architecture

Hikvision’s AcuSense Series of cameras and NVRs can prevent false alarms by identifying humans and vehicles when defining line crossing detection and triggering an alarm when only the selected object type (human and/or vehicle) is detected.

To set up False Alarm reductions and target classification without additional products, an AcuSense NVR and/or AcuSense cameras are required.

Figure 1, System Architecture Diagram

Function Description

Target Classification

By upgrading the hardware of conventional products, Hikvision has loaded artificial intelligence technology into the chip of the equipment. The equipment can classify and identify the objects appearing in the picture such as humans, vehicles, rainwater, light, leaves, animals, etc. Object classification is the basis for realizing false alarm and key target alarms.

Figure 2, Target Classification

False Alarm Reductions and Quick Target Search

Through target classification, alarms caused by animals, light, rain, leaves, or other objects can be filtered out, and only alarms triggered by human bodies and vehicles will be received. This is the function of a false alarm reduction.

In addition, in the face of a large number of monitoring video data, when searching key information such as people or cars, the target retrieval function is used. The device will record human body and vehicle information automatically, and solve the issue that video playback is time-consuming and easy to miss.

False Alarm Dy imhi

False Alarm by Rain

False Alarm by Animal

Figure 3, False Alarms

• False Alarm Reductions

* Quick Target Search

Human & vehicle targets detected efficiently.

The interference caused by other objeclsfanimal, leaf, light, rain, etc. f can be eliminated efficiently.

Human Target Search & Vehicle Target Search (supported by Hikvision AcuSense NVBs)

AcuSense Camera &

Main Functions

Figure 4, False Alarm Reductions and Quick Target Search

Configuring False Alarm Reductions

VISION

Live View

Playback

Picture

Configuration

Figure 5, Configuration > Event > Smart Event > Area Settings

1. Go to Configuration > Event > Smart Event > Line Crossing Detection in the local interface.
2. Use the pull-down list to select the camera to configure.
3. Check the Enable Local Smart Analysis checkbox to have the local NVR perform the smart analysis with a non-AcuSense camera. The NVR will acquire only the camera stream for intelligent event analysis, and the NVR will not acquire the camera’s smart event configuration. Up to four 8 MP non- AcuSense cameras are supported for false alarm reductions, and sub-stream resolution of these cameras have to be under WD1 (960*576). If this box is unchecked, the AcuSense camera (required in this case) will do the analysis. The NVR will acquire smart event configuration and alarm information from the camera.

NOTE: The NVR and camera configuration screens will slightly differ. This document uses the NVR configuration screens as examples.

1. Check the Enable Line Crossing Detection checkbox to activate line crossing detection.
2. Check one or both Detection Target checkboxes to set the type of object to trigger the alarm:

• Human: Alarm will be sent only if triggered by human(s).
• Vehicle: Alarm will be sent only if triggered by vehicle(s).
• No Box Checked: Alarm will be sent by any object(s).

1. Click the Area Settings tab.
2. Use the pull-down menu to set the line number to define (1-4). Up to four line crossing lines can be defined. The target classification can be set separately for each line.
3. Drag a line in the live view area with the left mouse button; release to end the line. Select line with left mouse button to move or resize the line.
4. Configure the line by clicking on one of the buttons:

• Max. Size*: Drag with the left mouse button to define a rectangle representing the maximum object size that will be detected crossing the defined line.
• Min. Size*: Drag with the left mouse button to define a rectangle representing the minimum object size that will be detected crossing the defined line.
• Draw Area: Drag with the left mouse button to define the total area to monitor.
• Clear: Click Clear, then click Save, to delete all line settings.

1. Use the pull-down menu to select the line crossing direction that will trigger the alarm:

• A<->B: Alarm will be triggered if object moves across the defined line from A side to B side or from B side to A side.
• A->B: Alarm will be triggered if object moves across the defined line from A side to B side.

Available only when configuring through the local NVR; setting will not appear if configuring through the camera.

• B->A: Alarm will be triggered if object moves across the defined line from B side to A side.

1. Set line crossing Sensitivity (0-100). The sensitivity value = 100 – S1/ST x 100, where S1 is the area of the target that has crossed the line and ST is the actual area of the target. The higher the sensitivity, the easier it is to trigger the alarm.
2. Click Save to save the line crossing settings.
3. Repeat for additional lines, up to four total.
4. Click Save.

Configuring Arming Schedule

Figure 6, Arming Schedule

1. Click the Arming Schedule tab to display the Arming Schedule section.
2. Drag the left mouse button to draw/modify blue timelines to define the times and days that the defined alarm will be active. The line may be resized and/or re-positioned using the mouse.

NOTE: Click X Delete to delete a highlighted blue timeline.

Click the HU Delete All to delete all of the defined blue timelines.

1. Click Save to save the schedule settings.

Configuring Linkage Method

Figure 7, Linkage Method

1. Click the Linkage Method tab to display the Linkage section.
2. Check the alarm action checkboxes you wish to configure:

• Normal Linkage

• Send Email – An alarm will cause the system to send an e-mail notification to the pre­defined e-mail address.
• Notify Surveillance Center – An alarm will cause notification to be sent to the pre-defined Surveillance Center.
• Upload to FTP/Memory Card – An alarm will cause the system to upload a notification to a pre-defined FTP site or memory card.
• White Light Flashing (Strobe Light and Audio Alarm/SL models only) – An alarm will cause the camera’s white light to flash (strobe).
• Audible Warning (Strobe Light and Audio Alarm/SL models only) – An alarm will cause the system to generate an audible alarm.

• Trigger Recording^[1]

• A1 – An alarm will cause this camera to start recording.

1. Click Save to save the alarm action settings.

Configuring White Light Output (Strobe Light and Audio Alarm/SL Model Only)

1. Go to Configuration > Event > Basic Event > White Light Alarm Output.
2. Set Flashing Duration from 1 to 60 seconds.
3. Set Flashing Frequency to High (interval 0.6 seconds), Medium (interval 1 second), or Low (interval 1.5 seconds).
4. Click Save to save the settings.

Figure 8, White Light Alarm Output

Configuring Audible Alarm Output (Strobe Light and Audio Alarm/SL Model Only)

Figure 9, Audible Alarm Output

1. Go to Configuration > Event > Basic Event > Audible Alarm Output.
2. Set Alarm Sound Type – Click the drop-down list to select one of 10 types of built-in alarm sounds.

NOTE: Importing local audio files is not supported.

Details of 10 Types Built-in Alarm Sounds

Figure 10, Alarm Sound Type Pull-Down List

1. Set Alarm Times – Enter how many times the alarm sound will repeat, from 1 to 50 times
2. Set Sound Volume – Volume can be set from 1 (softest) to 100 (loudest).

Checking Alarms

Use the Web interface to check the defined alarms.

Figure 11, Line Crossing Detection (Target: Vehicle)

1. Perform the following steps to show the defined lines and draw area overlaid on the image.

A Go to Configuration > Local > Rules.

2 Check the Enable checkbox.

Figure 12, Enable Target Rule Box

1. Check the alarm on the network camera’s Web preview interface. When someone crosses the line, the perimeter box and line crossing lines turn red.

Figure 13, Human Triggers Line Crossing Detection Alarm

Figure 14, iVMS-4200 Filter Human Alarm

NOTE: The rule box displayed in the network camera Web preview interface does not make target classification judgments; the alarm information is subject to the search result received from the alarm receiver and NVR. A comparison of the Web interface with the alarm receiver (such as iVMS-4200 client) can be used to distinguish if false alarm reductions has been performed.

Quick Target Searching

NVR Search Capabilities

File Management Search

1. On an AcuSense I-Series NVR, go to File Management.
2. Highlight Human Files or Vehicle Files.
3. Time: Set the time frame you wish to search.
4. Camera: Set the camera you wish to search.

5. File Type: Set file type you wish to search, Videos or Pictures.

For DS-9664N/-/8 local interface, file type must be specified with search conditions.

NOTE: AcuSense NVRs can switch between picture and video on the search results page without having to perform the search again.

6. Set the search choices:

• Select the target image in the red box area on the upper left corner, and listed picture will be a close-up view of the target.
• Select the source image in the red box area on the upper left corner, and listed picture will be the original picture.
• Select video in the red box on the upper right corner, and listed files will all be video files.
• Select picture in the red box on the upper right corner, and listed files will all be picture files.
• Select All, and the images and videos will be displayed together.

İDS-7732NXI-I4/16P/4S Local Interface

File type can be actively switched using the options located at the top right. Both picture and video results can also be listed together by using the All option.

Smart Search

AcuSense NVRs support smart search for Human Body Detection and Vehicle Search. Picture and video is combined on the search results preview screen.

IDS-7732NXI-I4/16P/4S Local Interface

NOTE: I-Series NVRs do not support smart search for human and/or vehicle target filtering.

DS-9664NI-I8 L ocal Interface

False Alarms Search

AcuSense NVRs can display all false alarms by using the All Files search (set event type to “False Alarm”). False alarms are generated by objects that approach being mistaken for a human or vehicle.

Figure 15, False Alarms

iVMS-4200 Client

Figure 16, Add Network Camera

Adding a Network Camera

1. Add the camera in the iVMS-4200 Device Management section.

Figure 17, iVMS-4200 View Alarm Information (Human)

1. View the triggered alarm on the iVMS-4200 Alarm Event interface. Alarm detail information will be labeled Human or Vehicle, as shown in the figure below.

Figure 18, iVMS-4200 View Alarm Information (Vehicle)

NOTE: The Target Type shown on the iVMS-4200 is the same as the Detection Type set in the configuration interface. Alarm information triggered by the unchecked category will be filtered and will not be displayed on the iVMS-4200.

1) Set Detection Type to Human, then the iVMS-4200 will display only Human target type alarm information.

2 Set Detection Type to Vehicle, then the iVMS-4200 will display only Vehicle target type alarm information.

Viewing Alarm on GUI Interface

The NVR’s local GUI interface cannot classify Humans and Vehicles in this version.

The current mechanism: after checking Smart Detection, the GUI interface will display all alarm pictures without classification between humans and vehicles (this feature will be optimized by the end of the year).

Figure 19, NVR local GUI interface

Viewing Alarms on iVMS-4200

1. Add the NVR on the iVMS-4200 Device Management interface.

Figure 20, Add NVR on iVMS-4200

Figure 21, View Alarm Information on iVMS-4200 (Human)

2. View the triggered alarm on the iVMS-4200 Alarm Event interface. Alarm detail information will label the target category as Human or Vehicle, as shown in the figure below.

Figure 22, View Alarm Information on iVMS-4200 (Vehicle)

The NVR alarm upload via iVMS-4200 is the same as for a network camera. The Target Type shown on the iVMS-4200 is consistent with the Detection Type set on the configuration interface. Unchecked categories will be filtered out and will not be displayed on the iVMS-4200.

Known Issue

When adding network cameras to the NVR, the NVR will issue a 24-hour arming schedule to the camera by default. After the camera is connected, configuring an arming schedule on the NVR will affect only whether the alarm is reported and displayed on this NVR, but the camera setting time will not change. If other terminals access the camera, the alarm will still be received.

Product List

Installation Requirements

• The proposal altitude of installation distance is 3 to 5 meters, equipment bow angle is approximately 10°, specific adjustments are according to the environment.
• The maximum monitoring distance depends on the lens’ focal length. The table of the maximum monitoring distance for the specific focal length is as follows:

• The monitoring area cannot be covered by nearby objects. Do not shoot backlight at the installation position, which will affect the image effect. The following shows a perimeter environment installation:

Figure 23, Installation of the Perimeter Environment

• The equipment installation needs to pay attention to certain blind areas. The calculation method of blind area distance is as follows:

Height

Horizontal Line

Depression Angle

H

D —» * Monitor Distances

• D = H • tan(90° – a/2 – p)
• D: Camera monitoring blind area H: Mounting height
• a: Vertical field Angle p Angle of depression

• Recommended Scenario:

• Try to avoid getting too close. It is recommended that the target be more than three meters away from the camera. For example, avoid scenes with lots of trees nearby.
• If there is a mirror in the environment, the mirror image or shadow can easily lead to false alarm

triggering.

• Adjust the camera angle during installation to avoid interference from high brightness lights or headlights.
• Domes are not recommended for outdoor scenes, IR reflect can seriously affect the accuracy of the alarm, as shown below:

– Heavy traffic scenes such as station, airport, theater, etc., will generate a lot of perimeter alarms, so it is suggested to avoid these types of scenes.

– Avoid situations where personnel targets are too large. AcuSense NVRs can analyze target sizes between 1/16 and 1/2 of the image’s vertical size. For example, if the camera’s resolution is 1080p, the vertical size of the target should be between 64 and 540 pixels.

In the following scene, the target takes up almost the whole picture. Adjusting the camera angle so that a targets is detected from a far distance so that it appears a suitable size is suggested.

Using Region Entrance/Exiting Detection instead of Intrusion/Line Crossing Detection is recommended for region intrusion of fixed scenarios.

1. Available alarm outputs will vary by NVR and camera. ↑

<p>The post Hikvision AcuSense NVR User Manual first appeared on NVR IPCAMERA SECURITY.</p>

UBox Features

• Support user register and binding device to user account
• Support power-saving mode and remote wakeup
• Support TF recording and cloud recording video
• Support notification with a snapshot
• Support notification with AI face recogization
• Live view H.264 720P/1080P up to 30FPS
• Dual way audio
• Remote Parameter setting
• Remote query alert and playback
• Support WiFi doorbell
• Support WiFi battery camera
• Support 4G wireless battery camera
• Support Solar WiFi/4G wireless camera
• Support Panoramic camera

How to Install UBox for PC

You need to Download BlueStacks on Windows or Mac PC first. Afterward, you have to start the installation of BlueStacks on your computer.

It is similar to any other software installation procedure on a PC. Run the setup, Allow the software to make changes in your computer, and then it will start to install.

In the second step to get UBox Download for PC, users have to enter Google Account. After the installation of BlueStacks, you will see the emulator home screen. Locate the Google PlayStore and launch it.

First-time users have to enter Google Account which is already in existence. Or, users can create a new one if unavailable.

Here the final steps arrive, now users are ready to use UBox on Laptop or desktop. Users got 2 options to accomplish the task.

1. Visit the Google Play Store > Search for the UBox App > Install it.

2. Downlaod UBox APK on PC > Drag and Drop it inside BlueStacks > Allow the emulator to install.

That’s how you can install UBox for PC.

Read Next : 

1. How to set up Geeni smart Wi-Fi camera
2. How to Install Joylite Smart Cameras

UBox Camera Common Problems

<p>The post UBox Camera complete guide UBox For PC first appeared on NVR IPCAMERA SECURITY.</p>

FAQ

Q: Which model of VTO (Outdoor Station) can work stand-alone and make a call notification to DMSS when call button is pressed?

A: DHI-VTO22202F-P, VTO2000A-S, VTO-2000A-2-S, VTO2111D-WP-S, VTO2000A, VTO2000A-2

Q: Can Apartment outdoor station (VTO1210C-X and VTO1210C-X-S and DHI-VTO4202F) work with DMSS App?

A: Yes, but it requires License for firmware customization. Please reach out to your local Sales Rep or Technical Consultant.

Q: How do I access device config page in VTH (indoor monitor) device?

A: From the homepage, press and hold Settings button for 6 seconds.

Q: What the difference between Transmission 1 and Transmission 2 on the network settings?

A: Mode 1: Multicast (multicast). The default is mode 1. Using multicast in a multicast network environment, the effect is best at this time
Mode 2: Unicast (TCP), If the router does not support multicast, the group call will have a black screen on VTH, then you can switch to unicast mode. In addition, if the network is particularly poor, you can also use this mode, because TCP has a retransmission mechanism to avoid frame loss.

How To Reset VTH Password via Computer

Description

This guide will show you how to reset the password of a Dahua VTH over a local network using VDP Config.

Prerequisites

• Windows PC.
• Dahua video intercom device on the same LAN as the PC
• Dahua Toolbox
• VDP Config

Video Instructions

Step by Step Instructions

1. Open DahuaToolbox and click Open next to VDPConfig

2. Discover the device in VDPConfig – How To Discover A Device Using VDPConfig

3. Select System Settings section

4. Click Device Password

5. Select the device(s) you wish to reset the password for on the left using the checkbox

6. Click Reset Password

7. Confirm the prompt

8. Use the dropdown box next to Reset Mode to select XML File

The default Export Path will be displayed where the XML will be saved. Click BrowsePath to modify this location.

Click Next to proceed

A prompt will confirm a successful reset and generation of the XML file.

9. Navigate to the location where the XML file was exported to. default file name is ExportFile.xml

10. Send the exported xml file as an attachment to the email address: support_rpwd@dahuatech.com

Then 2 or 3 minutes later, you will receive an email with the attached XML file

Save the results.XML file to the computer

11. In VDPConfig at the Reset Password interface click Open

12. Select the results.xml file click Open

13. Click Next

14. Once the reset is successful it will prompt to create a new password for the device.

Enter the new password and again to confirm

Click Complete

A green checkmark next to the device will confirm a successful password reset

How to Initialize Video Intercom using Configtool

Description

Initializing our Video intercom with Configtool simplifies and streamlines the process.

Configtool now handles the initialization phase and any IP address changes that need to be made. You no longer need to manually initialize our VDP devices manually

You can only Initialize the same type of Intercom at one time due to the password requirements

• VTHs requires a 6 character password (Numerical only)
• VTOs requires an 8 character password (Alpha Numerical combination)

Prerequisites

1. Configtool

2. Gen 3 Video Intercom devices

3. PC

Video Instructions

Read More : How To Dahua Video Intercom All Methods

Step by Step Instructions

1. Check the VTOs that you want to initialize and click on Initialize

Note:You can only Initialize the same type of Intercom at one time due to the password requirements

2. Click on Initialize

3. VTOs require at least an 8 character Alpa-Numeric password. Be sure to enter an email as this will be your method resetting the password if forgotten or lost. Click on Next to proceed

4. The green check marks will indicate that the devices have been successfully initialized. Click on Finish to complete the VTO initialization.

5. Select the VTHs you want to initialize and click on Initialize

Note:You can only Initialize the same type of Intercom at one time due to the password requirements

6. Click on Initialize

7. Enter a 6 Character Numerical password and an email as this will be your method to reset the password if forgotten or lost.

8. Green check marks indicates it was successfully initialized. Click on Finish to finalize the initialization.

Changing IP Addresses

Once devices are initialized you may want to change their IP Addresses to be on the same IP Scheme

1. To do that go to Search Setting

2. Enter the credentials if the device you want to modify and click on OK

3. The device list will refresh. Click on Edit for the device you want to edit

4. Enter the desired IP Address then click on OK to finalize

5. The green check mark will indicate that the IP address change was successful.

How to Setup and program Modules on DHI-VTO4202F-P-S2

Description

This guide will go over the wiring and programming of the modular accessories for our DHI-VTO4202F-P-S2

The only programmable Module in our product line is the Five-Button Call Panel.

Prerequisites

• DHI-VTO4202F-P-S2
• Module Accessories
• PC

Video Instructions

Step By Step Instructions

Physical Wiring of the Modules

You will always start at the DHI-VTO4202F-P-S2 OUT, then go to the next module on the IN port. Continue this pattern for the rest of the Modules.

Programming the Modules

1. Go to the DHI-VTO4202F-P-S2 WEBUI

2. Login to the VTO

3. Go to Local Settings

4. Click on the next available entry under Facade Layout

5. Select the Modules in the order you have them Physically wired

6. If you have multiple modules select the next empty slot. The order is labeled on the image below

7. The modules will populate once added

8. To program the Five-Button Call Panel select the empty box

9. Pick the Room Number you’d like to link it to

10. Select the next box if you have several Rooms you’d like to link

11. Select the second room number

12. In order to save the programming you need to click on Confirm

How to Forward calls to DSS Pro Client=

Description

This guide will go over the forwarding options for DSS Pro Client.

Each user created in DSS Pro will have its own unique Center Management number. Locate that number before

Prerequisites

• Video Intercom Setup with DSS Pro being the SIP Server

Video Instructions

Step by Step Instructions

1. Open DSS Pro Client and go to Video Intercom

2. Go to Call Management

3. Navigate over to Management Group Config

4. Select the User the Devices are setup with. In this guide we are using the “system” user. We will be using that number for forwarding the calls to the client.

5. Go to the VTH touch screen and enter the basic settings by tapping Setting

6. Go to Forward

7. Enter the number we located on step 4 and enable the status.

8. The calls will now be forwarded to DSS Pro Client

Video Intercom/SIP 2.0/How To Call DMSS

<p>The post Dahua Video Intercom GEN3 Setup Guide first appeared on NVR IPCAMERA SECURITY.</p>