How to find camera’s firmware version?

Before embarking on updating or upgrading IP camera’s firmware, you need to get the right one that matches your camera’s firmware. To know your existing camera’s firmware version, you can logon camera’s web interface. Click “Version” on the right top bar, it will pop-up a new window displays camera’s version info, for example:

• Video In: 1
• Alarm In: 2
• Alarm Output: 1
• Audio In: 1
• Build Date:2016/4/27 10:41:27
• System: V4.02.R11.00002531.10010.230800.00000
• Serial ID: cfa65bfd4422fb65

IP Camera Firmware List – Part 1

IP Camera Firmware List Part 2

Please share this article to social media, so that you can access the rest part of download links of IP camera’s firmware.

IP Camera Firmware List – Part 3

IP Camera Firmware List – Part 4

How to update/upgrade camera’s firmware?

Once you got correct firmware for your camera, you’re able to update and upgrade your camera with two different ways. Method 1: you can logon camera’s web interface via web browser and go to “DeviceCfg” > “Advanced” > “Upgrade” , now you can select firmware file, then upgrade firmware remotely.

<p>The post V5.00.R02.V4.02.R12. FIRMWARE DOWNLOAD for IP CAMERA first appeared on NVR IPCAMERA SECURITY.</p>

We constantly strive to keep our systems up to date. Should you still find errors / bugs, we would be delighted if you could report them to us. With your help, we can quickly and efficiently eliminate any errors.

We ask you to send the information to service@jovision.de. The more information, please note that you provide the following data in the mail:

– Camera type designation

– Camera firmware

– Error Description

IP camera instructions

Please note that there are two types of update variants. You should therefore make a good decision which variant you want to use.

Variant A (click here)

Variant B (click here)

Note:

With update variant B (special update / boot update) your camera is reset to the factory settings . All data and settings of the camera will be deleted . A new setup is then necessary.

NVR guide

<p>The post Jovision CloudSee NvSee NvSip Download first appeared on NVR IPCAMERA SECURITY.</p>

Often the XM products are sold by other brand names that use the same type of interface or slightly modified. Sometimes these types of surveillance devices are generally labeled as Chinese cameras, Chinese DVRs or Chinese NVRs, H.264 Chinese DVR, H.265 Chinese NVR, or just “generic Chinese DVRs” etc.

In this article, you can download firmware for the DVR, NVR, security camera from Xiong Mai and these firmwares are applicable to other surveillance devices that are based on processors such as Hi3516C, Hi3518C and Hi3518E, Hi3516D, Hi3516A.

• 1.0MP Camera Modules: IPG-50H10PL-S, IPG-50H10PL-AE, IPG-50H10PL-B, IPG-50H10PL-P
• 1.0MP WDR Camera Modules: IPG-52H10PL-B, IPG-52H10PL-P
• 1.3MP Camera Modules: IPG-53H13PES-SL, IPG-53H13PES-S, IPG-53H13PLS-S
• 1.3MP Aptina CMOS Camera Modules: IPG-53H13PL-S, IPG-53H13PL-AE, IPG-53H13PL-B, IPG-53H13PL-P
• 1.3MP Sony Low Light CMOS Camera Modules: IPG-53H13P-S, IPG-53H13P-AE, IPG-53H13P-B, IPG-53H13P-P
• 2.0MP CMOS Low Light Camera Modules: IPG-53H20PL-S, IPG-53H20PL-AE, IPG-53H20PL-B, IPG-53H20PL-P
• 4.0MP Camera Modules: IPG-83H40PL-B
• 5.0MP Low Light Camera Modules: IPG-83H50P-B, IPG-83H50P-P
• 1.0 / 1.3MP Hi3518E Camera Modules: IPG-50H10PE-S, IPG-50H10PE-SL, IPG-53H10PE-S, IPG-53H13PE-S
• P2P IP Camera Modules: IPM-50H10PE-O (R), IPG-50H10PL-R, IPG-53H13PL-R
• Wi-Fi Camera Modules: IPG-50H10PE-WP, IPG-53H13PE-WP
• Panoramic camera module: IPG-53M10F-B
• Intelligent analysis modules: IVG-HP200S-SE, IVG-HP200S-AE, IVG-HP201Y-SE, IVG-HP201Y-AE, IVG-HP203Y-SE, IVG-HP203Y-AE, IVG-HP500NR-AE

Firmware update for Chinese DVR, NVR, cameras

To update the IP camera firmware, you need to find out the device version. Each camera or DVR needs its own firmware. To check the device version of the IP camera from Xiong Mai, open the camera’s web interface, then navigate to Device Config > Setting > Info > Version.

From this window, we need the number after V4.02.R12. This number contains 17 digits, separated by a dot. In our example: 000 06 510. 10010. 1407.

If your first three digits are different from 000, then you have a modified firmware from the OEM manufacturer. Usually, these changes relate to the web interface and localization, so we can safely replace them with 000, the resulting number is the desired version of the device.

Below is an example of the firmware version from a DVR. Open System Info > Version], and there we see the version of the system in the line “System”. For example, the system version: V4.02.R11.00031095.12001.

Download Chinese H.264 DVR and H.265 NVR firmware

Search the model from the list shown in the next section. Update on your own risk. Don’t update if you’re not sure that you got the correct firmware. Contact the seller or the installer to get the right information.

• Upgrade/Update Software: JFOS-Devicemanage

<p>The post Firmware for Chinese DVR, NVR (H.264, H.265) first appeared on NVR IPCAMERA SECURITY.</p>

<p>The post Sunywo Zhongwei Firmware Software Download first appeared on NVR IPCAMERA SECURITY.</p>

Almost Chinese IP cameras are based on Hisilicon SoC solution, thus this article is applicable to IP cameras that utilize Hisilicon SoC such as Hi3518A, Hi3518C, and Hi3518E, as well as Hi3516C.

• 1.0MP Camera Modules: IPG-50H10PL-S，IPG-50H10PL-AE，IPG-50H10PL-B, IPG-50H10PL-P
• 1.0MP WDR Camera Modules: IPG-52H10PL-B, IPG-52H10PL-P
• 1.3MP Camera Modules: IPG-53H13PES-SL, IPG-53H13PES-S, IPG-53H13PLS-S
• 1.3MP Aptina CMOS Camera Modules: IPG-53H13PL-S, IPG-53H13PL-AE, IPG-53H13PL-B, IPG-53H13PL-P
• 1.3MP Sony Low Light CMOS Camera Modules: IPG-53H13P-S, IPG-53H13P-AE, IPG-53H13P-B, IPG-53H13P-P
• 2.0MP Low Light CMOS Camera Modules: IPG-53H20PL-S, IPG-53H20PL-AE, IPG-53H20PL-B, IPG-53H20PL-P
• 4.0MP Camera Modules: IPG-83H40PL-B
• 5.0MP Low Light Camera Modules: IPG-83H50P-B, IPG-83H50P-P
• 1.0/1.3MP Hi3518E Camera Modules: IPG-50H10PE-S, IPG-50H10PE-SL, IPG-53H10PE-S, IPG-53H13PE-S
• P2P IP Camera Modules: IPM-50H10PE-O(R), IPG-50H10PL-R, IPG-53H13PL-R
• WiFi Camera Modules: IPG-50H10PE-WP, IPG-53H13PE-WP
• Panoramic View camera Module: IPG-53M10F-B

To upgrade the firmware of IP camera, you need to know the existing firmware version. Basically, you need to obtain proper firmware for the proper IP camera. To know the Hisilicon IP camera’s firmware, you access camera web interface, then click [Device Config] > [Setting] > [Info] > [Version].

2# DOWNLOAD LATEST FIRMWARE FOR YOUR IPC

Ideally, you can get the latest firmware from your supplier. However, some manufacturers maybe not willing to offer this service, because using wrong firmware may cause irreparable damage to IP cameras.  Note: When you are at the firmware download page. In the upper right corner there is a dropdown list. Choose “English” to download the firmware. The firmware will be updated regularly, you can always find the latest one from below download URL. I recommend you to bookmark this article.

<p>The post Download IP Camera Firmware in China first appeared on NVR IPCAMERA SECURITY.</p>