We constantly strive to keep our systems up to date. Should you still find errors / bugs, we would be delighted if you could report them to us. With your help, we can quickly and efficiently eliminate any errors.

We ask you to send the information to service@jovision.de. The more information, please note that you provide the following data in the mail:

– Camera type designation

– Camera firmware

– Error Description

IP camera instructions

Please note that there are two types of update variants. You should therefore make a good decision which variant you want to use.

Variant A (click here)

Variant B (click here)

Note:

With update variant B (special update / boot update) your camera is reset to the factory settings . All data and settings of the camera will be deleted . A new setup is then necessary.

NVR guide

<p>The post Jovision CloudSee NvSee NvSip Download first appeared on NVR IPCAMERA SECURITY.</p>

Almost Chinese IP cameras are based on Hisilicon SoC solution, thus this article is applicable to IP cameras that utilize Hisilicon SoC such as Hi3518A, Hi3518C, and Hi3518E, as well as Hi3516C.

• 1.0MP Camera Modules: IPG-50H10PL-S，IPG-50H10PL-AE，IPG-50H10PL-B, IPG-50H10PL-P
• 1.0MP WDR Camera Modules: IPG-52H10PL-B, IPG-52H10PL-P
• 1.3MP Camera Modules: IPG-53H13PES-SL, IPG-53H13PES-S, IPG-53H13PLS-S
• 1.3MP Aptina CMOS Camera Modules: IPG-53H13PL-S, IPG-53H13PL-AE, IPG-53H13PL-B, IPG-53H13PL-P
• 1.3MP Sony Low Light CMOS Camera Modules: IPG-53H13P-S, IPG-53H13P-AE, IPG-53H13P-B, IPG-53H13P-P
• 2.0MP Low Light CMOS Camera Modules: IPG-53H20PL-S, IPG-53H20PL-AE, IPG-53H20PL-B, IPG-53H20PL-P
• 4.0MP Camera Modules: IPG-83H40PL-B
• 5.0MP Low Light Camera Modules: IPG-83H50P-B, IPG-83H50P-P
• 1.0/1.3MP Hi3518E Camera Modules: IPG-50H10PE-S, IPG-50H10PE-SL, IPG-53H10PE-S, IPG-53H13PE-S
• P2P IP Camera Modules: IPM-50H10PE-O(R), IPG-50H10PL-R, IPG-53H13PL-R
• WiFi Camera Modules: IPG-50H10PE-WP, IPG-53H13PE-WP
• Panoramic View camera Module: IPG-53M10F-B

To upgrade the firmware of IP camera, you need to know the existing firmware version. Basically, you need to obtain proper firmware for the proper IP camera. To know the Hisilicon IP camera’s firmware, you access camera web interface, then click [Device Config] > [Setting] > [Info] > [Version].

2# DOWNLOAD LATEST FIRMWARE FOR YOUR IPC

Ideally, you can get the latest firmware from your supplier. However, some manufacturers maybe not willing to offer this service, because using wrong firmware may cause irreparable damage to IP cameras.  Note: When you are at the firmware download page. In the upper right corner there is a dropdown list. Choose “English” to download the firmware. The firmware will be updated regularly, you can always find the latest one from below download URL. I recommend you to bookmark this article.

<p>The post Download IP Camera Firmware in China first appeared on NVR IPCAMERA SECURITY.</p>