This article is to show you how to back up the video file from new system UI.

Prerequisites

• Dahua North America device with new latest firmware
• Monitor connected to the device itself
• USB mouse to control system UI

Video Instructions

Step by Step Instructions

1. From the main menu, go to the second menu page, and click on Backup.

2. Backup page will launch as shown below:

3. You must plug in an external drive to save your downloaded file. Select the path where you want to save the file at. From this pop-up screen, you have an option to create new folder. After you select, click OK.

4. Select the Record Channel you like to search. You can only search 1 channel at a time.

5. Select the Recording Type you like to search.

6. Set the start and end time for searching. Then click Search. All recorded files that meets your search criteria will shown on the list.

7. Select the files, and click Backup.

8. Downloading process start.

9. Once finished, the folder information will pop up, then click OK.

<p>The post How to back up video Dahua DVR NVR first appeared on NVR IPCAMERA SECURITY.</p>

Note: If the remote directory is not specified, the system will create different folders directly by IP,
time and camera. You may also specify a remote directly, for example, FTPtest/xxx/xxx, then the
system will create the directory first and then create folders by IP, time and camera.

Note: If you select Event, Motion, Alarm or Video Loss, you also need to configure the
corresponding alarm-triggered snapshot. For example, if you select Motion, you need to
configure alarm-triggered snapshot (select Motion in the Edit Schedule window).

1. Click System > Network > FTP.
2. Select the check box to enable FTP.
3. Enter the IP address of the FTP server, username and password, remote directory, and
upload interval.
4. Select the desired camera and then click right to Upload Schedule. In the Upload
Schedule window, select the desired image type and set time periods.

5. (Optional) Apply the same settings to other cameras by clicking right to Copy and then
selecting desired cameras.
6. Click Apply to save the settings.

<p>The post How to set FTP server in NVR? first appeared on NVR IPCAMERA SECURITY.</p>