Getting Started: Setting Up User Privileges

The VORTEX Portal provides a structured hierarchy of user roles to ensure smooth management while maintaining high security. This article will guide you through understanding and setting up the four roles: Owner, Admin, Supervisor, and Viewer.

Who Sees What

Below is a table that explains in detail each role and their associated features:

Vivotek Vortex Camera Ultimate Guide

Read More : iViewer installation and user guide

How to set up privileges for a user

Step 1: Go to the Users page.

Step 2: Click on a user’s name or profile to enter their detail page.

Step 3: Locate and click the “Access settings” button on the top-right.

Step 4: Assign the appropriate device groups for permission.

Step 5: Once you’ve made the necessary changes, click “Save” to finalize the settings.

.

Getting Started: Setting up your VORTEX account

To access the VORTEX system, please proceed the following steps to set up your VORTEX account.

Step 1. Scan the QR code below to download the VORTEX app.

Step 2. Open the application in your mobile device and click on the “Create account” button to create a VORTEX account.

Step 3. Type your email to be use to access the system and set a password.

Enter an email address and a password. The password should contain 8 to 64 alphanumeric characters, including at least one uppercase letter, one lowercase letter, and one numeric character. Spaces are not allowed. When finished click on the “Create account” button. 

The application will send an email to the configured address so that you can activate your account. 

Step 4. Access your email and look for a “Welcome to VIVOTEK Vortex” email. If you cannot find it, you can search it by using the mail filter “no-reply@verificationemail.com”. Then, click on the “Verify Email” to activate your account. 

Once the account is activated, you will see the following message in the browser:

Step 5. Go back to the application and login into the system by using your email and password.

Congratulations! You now are able to access the VORTEX service in your phone!

Getting Started: Adding your VORTEX camera to your VORTEX account

VORTEX cameras are very easy to configure. Here is a detailed step-by-step guide that will teach you how to add the device: 

Step 1. In your mobile device, run the VORTEX application. 

Step 2. Access the VORTEX service using your email and password. 

Step 3. Click on your account icon to open the application menu. 

Step 4. Click on “+ Add devices” button to start adding your device.

The application will open the camera feature (be sure to enable the respective permissions). Then, scan the QR code located either on the package box or on the camera itself.

If the scan is successful, you will first see the camera’s general information. Be sure that the information displayed is correct. 

Step 5. Click on the “Add” button to add the device to your account. Once added you will see the following message:

If you want to keep adding devices, click on the “Add another device” button and repeat the same process. 

Step 6. Check that the device is visible in the application. 

You can also go to the VORTEX Portal and check that the camera was added to the system properly. 

<p>The post Vivotek Vortex Camera Ultimate Guide first appeared on NVR IPCAMERA SECURITY.</p>

Safety Caution

All PRODUCTS & PARTSThis product may require cabling,we suggest to test all products&parts before installation and cabling×Dismiss this alert.

Nvr product description

1.  WIFI Antenna Ports:Double antennas to WIFI range

2. WAN Port:Connect your NVR to Internet

3. VGA Port:For viewing on VGA monitor

4. HDMI Port:For viewing on HDTV

5. USB Ports:For mouse and backup

6. Power Input

IP Cameras product description

①. WiFi antenna:WiFi connection with NVR；
②. DC Port:input power 12V 1A;
③. Reset Button:press reset button for 10 seconds to restore factory setting and enter into matching-code mode;
④. RJ45 Port:for pair the camera with NVR,or connect the camera by wired connection

Note:Working temperature ranging from -13 degrees Fahrenheit to 122 degrees Fahrenheit.

Installation Instruction of WIFI NVR KIT

EseeCloud Wireless Security Camera System Installation

Read More : Wi-Fi NVR Kits User Manual

Note:The NVR can work with the router by wireless connection and wired connection Wired connection: when your NVR connect by RJ45 to your router,it will get network settings automatically Wireless connection: right click your NVR mouse and choose System Setup→Network Setup→Wireless Internet→Enable the Wireless LAN→find your own wifi network,and put wifi password here (pls notes it doesn’t work with 5G WIFI network)×Dismiss this alert.

Setup The System

This system is standalone with embedded Linux Operating System in the NVR. Just like a desktop PC, need to hook a screen to the NVR to enter the OS .Any TV,monitor with VGA or HDMI input should work for it.

If you connect the NVR with monitor shows Hiseeu logo or shows black,normally it is your monitor resolution is lower then the NVR.You can press the left side of the mouse for 30s,then it will reboot.

If still can’t work,pls change a monitor,thanks.

When you turn on the NVR box, the monitor will get below interface: Setup Wizard- -Down- -General setup- -Next -wireless setup- -Next- -Fast network- -Next -Format the hard drive- -Next

CHECK NVR NETWORK , CHANGE NVR SYSTEM LOGIN PASSWORD

Once you have completed connecting the NVR,wait approximately 2-3 minutes.Next you will see the window below on your monitor screen.For your first time to login in,User name is admin,there is no password,just choose ok to get into the menu.
(if you forget the password,pls find the solution on the FAQ page)

Tips: To protect your privacy,please set your password at earliest convenience(don’t set the password over 8 characters).Right click the mouse→System Setup→System Admin→User to set password.

How to check if your Cloud is online and Network status is healthy ?

Right click the mouse of the register,choose Fast Network.In the middle of the window you should see Cloud status as ONLINE and Network Status as Healthy Network.

If this does not appear, select Manual Config then enable DHCP,Click Apply,then power off the NVR box,wait a few seconds and power up.

Once you power up, repeat the steps outlined as above.Cloud status must be ONLINE and Network Status must be Healthy Network.If this does not happen,you will not be able to view remotely

Menu Do What

Menu bar

Split Screen: change status of live view.You can choose to view multiple cameras or any single camera.

Video Manage: manage IP cameras and NVR channels.

System Setup: all system settings.

Video Playback: playback recorded videos.

Video Backup: backup recorded videos.

Color Adjust: adjust the image setting of the each camera

PTZ Control: control PTZ camera

Volume: Adjust volume of audio cameras(works only for audio cameras).

Setup Wizard: step by step guide of 1st time general settings.

Fast Network: shortcut to network settings.

Wireless Add: add IP cameras into NVR channels wirelessly.

Exit System: logout,reboot,close screen output and shut down the system.

System Setup

Click right button→Choose System setup; enter the menu that enables you to do all settings related to this system.

Menu Do What

There are 3 modes for reocrd.

Note: Users can setup any period of time they want,for example 0:00:00-23:59:59,That’s 24 hours×7days recording.When NVR detects hard disk,the default setting will be 24 hours×7 days recording.

The priority of Alarm is higher than that of Motion,and the priority of Motion is higher than that of Time.

Video Playback

Steps: right clik mouse in main menu→Video playback→choose date,channel,record mode→click search→then can view playback file.(IE browser can’t check the playback directly,so you can use the Eseecloud software on computer or check on your phone app Eseecloud and IP RPO)

Warm prompt:

1.IIIustration for playback button: play, pause, fast forward×2,×4,×8

2.Play file:Choose the recording file in file list,as number “1” shown in picture.Choose one of the recording,click “play” to play to recording file;

3.Video backup:Choose the recording file in file list,as number “1” shown in picture.Insert the U flash disk,click “video backup” to backup the file;

4.Timeline: Click “date”and “time”at left bottom to check the timeline of recording,as number “2″ shown in picture;

5.On the timeline with recording file,left click the mouse,the can playback the file.

Notes: you can see four channel cameras playback at the same time,if you want to check other channels you need select the correct channel at first,then choose search to find it playback.

How to Backup the video

Use U disk to copy video,so easy and convenient!

The playback files is avi. format, you can use VLC player to check it on your computer VLC player.
download link: https://www.videolan.org

View on PC via lE or Eseecloud and Phone APP Eseecloud or IP PRO

To View on the the PC

To view on browser,you have to connect the NVR and your computer to the same router.Enter the IP address of NVR on the browser’s address bar.(We recommend using IE or Micorosoft Edge) Right click the mouse→system setup→Network Setup→IP address (Start with 192.168… )
You can change language on the right top corner.

To view on Eseecloud software on PC

Input Cloud ID (Right click the mouse→fast network→Cloud ID)
Input User Name and Password (If you doesn’t change the user name and password,User Name is admin ,no password)
please download Eseecloud software from： https://ipproapp.com/computer
user name is admin,no password,choose login

*Select “Add”
*Select “Cloud ID”.enter the cloud ID(9 or 10 numbers).You can find it on your home monitor screen.
Or right click the mouse, choose Fast network find cloud ID here
* Username is NVR system user name on your home monitor screen
* Password is your NVR system password on your home monitor screen.(If you don’t change It in your setup,it should be no password)
* Channels: Input 4 or 6 or 8. If you have 4 cameras,enter 4 etc.
* Click Confirm and you will see the video.

if you check in the local network,you can use the NVR IP address to add the system (Find the IP address on Fast network page or Network setting page)

To View on IE browser

Find the IP address: right click your mouse and choose Fast network, you will see the IP address here.
Enter the NVR’s IP address in your IE browser for example: http://192.168.1.105(If the default WEB port 80 has been changed e.g. to 100,you need to add new port number when input IP address in the browser,for example: http://192.168.1.105:100).

To view on the Phone

Users can use cellphone to scan the QR code below to install the APP free of charge,or users can search “Eseecloud”or ’IP PRO‘ on APP store or Google Play then install the APP.

Click “+”→other ways to add/ scan the QR code on your fast network page→Network connected device→input Cloud ID and User name and password (user name and password is the same one you login in NVR)

Tips: if you’ve set a password on your NVR system,please update your password on APP to view.
And if your camera loading for a long time and don’t show image,you can right click your NVR mouse and choose System Setup→Network setup,change the MTU to 1000.

Playback On Mobiles

In the Eseecloud APP,while viewing live video of the system,click Playback,you will enter the remote playback menu.The APP Playback only check one channel at one time

Tips: Videos in playback are HD mode for real time which requires very good transmission condition.
We suggest to playback in LAN.Remote playback out of LAN may not 100% work due to connection & network condition.

Extend WIFI Range

Wireless connection is easy and convenient, but it’s not universal application. Because of the character of WIFI, the WIFI signal will decrease when going through some obstacles Some methods can be applied to bypass obstacles and extend WiFi range.

Position The Antenna Correctly

WIFI range is like an apple and the antenna of NVR is in the center of it.WIFI signal is strong all around the WIFI range.Antenna of NVR should be put straight up,if not,WIFI signal will be weak.
According to the signal transmission character of antenna, the antenna of cameras should overlap or parallel to NVR WIFI range,as pictures showed below:

Use Antenna Extension Cord to prolong WIFI distance

Installation method of antenna extension cord

Note:When WIFI signal is not strong enough against walls,users can take off the original antenna and subtitute antenna extension cord.Drill a hole on the wall to let the extension cord go through and simply it where WIFI signal is strong.

Set up cascading connection in a reasonable solution,extend wifi signal transfer distance

Note:
Repeater function can’t strengthen WIFI signal for wireless NVR kit, but can extend the distance by repeaters→WIFI cameras.

Only when the repeater cameras and repeated cameras are positioned correctly,WIFI distance will be extended.

Repeater function and 3 meters antenna extension cord are two methods to extend WIFI range.
Users can choose one according to real situation.

Repeater Setup

Step 1. Right click the NVR mouse,and choose “Video Manage”- -then left click Repeater”

Step 2. Add repeater
As picture shown below,click icon + besides channel 3,choose other channel.

Step 3. As picture shown below, it means IPC1 is connected to NVR through IPC2 and IPC3.
IPC2 is connected to NVR through IPC3.IPC3 is connected to NVR directly.

Step 4. Click “Apply” and then click “refresh” to check if the setting is successful.

Delete Repeater

Move the mouse to targeted channels,left click to delete,and then click “Apply” and “OK”.

Application Example

As picture shown above, when IPCAM1 is put somewhere is out of NVR WIFI range,and there is IPCAM2 between them with strong WIFI signal,users can put IPCAM1 close to NVR and power it, setup IPCAM1 repeated by IPCAM2, and then install IPCAM1 to the presupposed place.

Camera add failure reasons and solutions

Q1: Failed to add the camera for the first time

Check whether the green light of the camera flashes normally. If the camera status light is not flashing green, use a thimble to lightly insert the configuration hole or long press the reset button until the camera indicator flashes.

Q2: Determine whether the binding failure caused by the router settings

1. The router has been set up to prevent Wi-fi squatter If the Wi-Fi connected to the camera is set to prevent Wi-fi squatter(black and white lists, MAC address filtering, etc.), the camera will not be able to connect to the Internet. The router’s prevent Wi-fi squatter settings need to be canceled.

2. The router is set up with 5GHz band wireless WiFi The camera does not currently support the connection of 5G band WiFi. Please open the router management page (generally marked with the address of the management page on the bottom label of the router), select the wireless setting 2.4GHz, and set it to on.

Q3: Check whether the mobile phone prohibit the permission of  EseeCloud to use data, WLAN, GPS

Domestic Android phones may prohibit the use of data, WLAN, GPS permissions for this application, resulting in the camera being unable to connect to WiFi. Solution (Android phone): Open the phone settings center-click “application management”-open the above permissions

Q4: Make sure that the WilFi account and password are filled in correctly

It is likely that the Wi-Fi account and password you connected to the camera are incorrect, resulting in the camera not being able to connect to the network. In particular, pay attention to whether there is a space input, and try to avoid complex and uncommon symbols.

Q5: Other questions

1. If the router is set to bridge mode, the WiFi signal will be unstable, causing the connection to fail. It is not recommended to use WiFi in bridge mode when the camera is networked.

2. If you are a campus / enterprise user and the school 1 company assigns each student / employee a static IP to access the Internet, you can manually enter the static IP information to access the Internet.At present, this situation is not supported by camera networking, need to select other available WiFi connections.

3. The camera does not support WPA / WPA2’s “enterprise” encryption method to connect the camera to the network. Support WEP, WPA–PSK 1 WPA2–PSK, or corporate WiFi without password. If the camera is networked in the corporate network environment, please confirm in advance whether the WiFi encryption method meets the camera networking requirements.

What should do if the camera is offline?

Q1: Camera offline processing method

1. Check whether your device is power-on and the status light is on;
2. If you are using WIFI connection, please confirm whether you have modified the WIFI in the environment where the device is located-including the WIFI password and name, if modified, please reconfigure WIFl;
3. If the reason cannot be resolved, please restore the factory settings and add the network again.

Device preview help

Different devices support different functions. Preview interface only shows the functions supported.

Light control:setup on/off,brightness,color temperature for light control device

Screenshot:snapshot current preview image

Recording: record current preview video

Full screen:tap button and switch to landscape viewing

Calendar:choose playback time to show all recording files wanted

Remote playback: device must to be inserted TF card.

Two way talk:press the button and talk for a long time

Installation mode:swith to wall installation and ceiling installation mode

Display mode: at ceiling installation mode,there have fisheye mode,cylinder mode,corridor mode and fulI screen mode

Cruise: setup auto cruise .

Sound:setup the sound on/off

Swith code stream:switch HD and SD

Split screen dispaly: choose screen channel number

Screen aspect ratio: can set the screen aspect ratio

PTZ control: control the movement of high speed dome

Timeline:drag the time line left and right to choose recording period . Use fingers to zoom in or zoom out the timeline

Add Camera

Add device

Method 1: Enter to device list interface after login, click the t’ button in the upper right corner of the interface, and select the add device” button.
Method 2: Click the’+’ button in the interface to enter directly to add device interface.

add camera

1. There is a QR code on the device body:
Scan the QR code on the device,display the device ID of the current device , click the Add ICON below jump to the prompt interface of operation guide.

add cameraadd cameraadd camera

2. Can’t find the device QR code :
lf there is no QR code on the device, click ‘Other ways to add’ and then select ‘Standalone camera’.

add cameraadd cameraadd camera

3. Please connect your mobile WiFi to the device hotspot.

Open Settings-> Select Wireless LAN > Select ‘IPCXXXXXXXXX’ device hotspot.

Connect hotspot,default password：11111111

add camera

4. After connecting successfully,return to APP.

Remote View: View video via WIFI or other network, please select Remote View.(most people choose)
Direct Connection: View video without network ,select Direct Connection. (few people choose)

5. Select Remote View to continue.
Select your wifi and enter your wifi password, then click Confirm .

add camera

add camera

6. Configuring, do not unplug the network! The network configuration process may take 1-2 minutes, please be patient.

add camera

7. Set device name and device password.
For added security, please set a password.

add cameraadd cameraadd cameraadd camera

Device Sharing
Generate shared QR codes ln the device list, click the “Share” button, set the right to share, choose to share, and generate QR codes.

Device SharingDevice SharingDevice Sharing

Scan and share QR code.
click on the’+’button in the upper right corner of the interface to enter to add device interface, click on scan add device, enter to scan interface, scan shared device QR code, after display the scan results then return to device list interface.
Note: You need to allow access to the camera and album to use this function properly.

Scan and share QR codeScan and share QR code

App Operation

Log in

This APP support “account log-in”, third-party log-in” and local experience”.
Account log-in: At log-in interface, input user name/cellphone number/email address and password, click ‘0K” and log in.
Third-party log-in: Click the icon of third-party network social software, authorize the APP to log in.Local experience: Users can use the APP without log-in.
Remember the password: Supportremem-berring the account and password that have been logged in, which is convenient for switching account login.
Note: Please pay attention thatLocal experience” mode will be stored at local.Once data is lost, it can’t be restored.

IP PRO Log in

Registration

Input cellphone number/email address to register, get verification code.
Input verification code and password, click “OK”. After registration it will move to device list.
Note: Each cellphone number/ email address can be used for registration once.

IP PRO RegistrationIP PRO Registration

Reset Password

Input registered cellphone number /email address to get verification code. Input verification code, reset password and click “OK”.
Then go back to log-in interface, log in with new password.

IP PRO Reset Password

Frequently Asked Questions

Question one：After installation, open the CMS and display “Cannot load plugin”?

Answer one：

1.Please confirm whether the installation path uses Chinese when installing, and the plugin is temporarily not compatible with Chinese path.

2.After confirming the non-Chinese path, if the problem persists, you can contact technical support for assistance.

Question two：After connecting multiple channels of video (more than 30 channels), videos stop for a few seconds , all channels are automatically disconnected into the black screen. The device connected again has no response. Do we need to restart the CMS?

Answer two：The new version of CMS3.0.1 runs with higher memory. If you connect many channels by the lower configuration computer, the computer system will run out of memory, causing the CMS to run abnormally. If the computer configuration is slightly lower, it is recommended not to connect too many channels. The optimization work has been planned for this situation.

Question three：When CMS is installed on the OSX system, it displays “File is corrupted” or “Unable to open” when it is opened?

Answer three：

1.Open “System Settings” → “Security and Privacy” → “Allow applications to be downloaded in the following location”, check “any source” (applies to versions prior to OSX10.12.X);

2.Open “Terminal”, enter the string “sudo spctl –master-disable”, press the “Enter” key, enter the sudo password (applicable to versions after OSX10.12.X). If the above method still does not work, please contact us to help you solve it.

Question four：After starting a window and flashing, it will not start or XP will appear. Open the software to indicate 0a00000000 memory referenced by 0x00000000 instruction. The memory cannot be ‘written’.

Answer four：Large probability video card driver problem, update the graphics card driver can solve

Question five：It shows  mfc100u.dll lost when opening computer

Answer five：Install VC++2010 library to solve the problem

More features

User Management

New user：①Click New User ②Enter username (required) + note name (optional)③Click to confirm

Modify permissions：

Default: The default permissions include screenshot, video, PTZ settings, video playback, remote download 5 items

modify：①Click edit permission ②Check the permissions and devices/channels that need to be assigned to new users (you can click to select all) ③Click to confirm

Other functions：

        ①Clear password: If the login password of the new user is forgotten, you can log in to the newly created user again by directly clearing the password and the internal setting data can be retained.

        ②Modify the note: Add a note, change the note or delete the note, go to the modify note operation

        ③Delete user: If you feel that the newly created user is not necessary, click delete user to delete the user.

New userModify permissionsModify user

Log query

Inquire：①Confirm ‘start time + end time’②Confirm ‘log type’ (including: alarm log, login log, operation log)③Selected area ④Click to query

Log query 

Resource management

Screenshot：

search for：①Select ‘start time+end time’ ②Click search

Preview：①Method one selects ‘preview’ for right-click operation ②The second method is the screenshot file retrieved by direct click.

delete：①Method 1 Select ‘Delete’ for the right-click operation. ②The second method is to enter the screenshot preview state and click to select ‘delete’.

location：①Method 1 Select ‘Open location’ for right-click operation②Method 2 is to click ‘Save Location’ in the resource information.

Resource information：‘user, resource size, resolution, device name, associated channel, screenshot time, save location’, including the above content (as shown in Figure 2)

Replacement size：‘Original size, maximize, zoom in, zoom out, resource information, delete’, the screenshot preview status includes the above status/function that can be switched to

video：

search for：①Select ‘start time+end time+’②Select the recording type (including: preview video, playback video, default all types)③Click search

Resource information：‘user, resource size, recording type, device name, associated channel, recording time, save location’, including the above

Other functions：The operation steps of ‘preview, resource information, location, delete’ function are the same as the screenshots. For details, please refer to the operation in the screenshot.

Right click operationResource information

System Info

Version Information：The content is displayed as follows ‘version number, date’

change Password：①Enter ‘original password + new password + confirm new password’②Click to confirm ③Re-login verification password

sign out：Click the ‘Exit Login’ button to quit the login status of the current account.

System Info

User parameter

Basic Settings

Split screen number：The selected split screen number is displayed after the re-login, and the CMS provides split screen 1/4/6/8/9/16/25/36/49 nine forms of choice.

Display language：CMS currently defaults to 9 display languages, such as Simplified Chinese and English. When you choose to log in again, you will switch to the corresponding language.

Login Method：The cloud login mode is online. You need to connect to the external network when you log in. The local login does not have this hard requirement.

List style：The list style includes tree shape and graphics. The replacement is only the real-time preview interface and the display of the device list under the playback interface. The device list under other interfaces is unified into the tree list style.

Path modification：

①Screenshot path: The screenshot file is saved in the snapshot folder by default, and can be saved in other paths according to its own needs.

②Local recording path: The local recording file is saved in the record folder by default, and can be saved in other paths according to its own needs.

③Video download path: The files downloaded by the playback video are saved in the video_download folder by default, and can be saved in other paths according to their needs.

Preview sync time：Check the time when the device is previewed and the computer will be automatically synchronized (only ipc is supported)

note：After modifying the settings, click “Finish” and you will need to log in again. (It is best not to modify it to a directory containing Chinese)

advanced settings

Time zone setting：The local time zone can be selected according to the actual situation.

Automatic lock：Check the auto lock and enter the integer in minutes in the time frame. If no operation is performed on the CMS within the time of the input, the CMS will automatically lock.

Automatically connect video：After logging in to the auto-connect video, log in to the CMS and automatically connect to the device added to the device list. The number of connected channels is the number of split screens in the basic settings.

Basic Settingsadvanced settings

Equipment management

Add device

Add a LAN device：①Enter the device management interface ②Refresh LAN device ③Check the device and click Add (LAN device can be filtered by entering IP/ID in the filter box)

Add cloud ID device：Manually enter the device ‘cloud ID number + channel number’, select ‘type’ according to the actual situation of the device, and the rest can click to confirm (the password can be selected according to the actual settings of the device)

Add an IP/DDNS device：Manually enter the device ‘IP/DDNS+port+channel number’, select ‘type’ according to the actual situation of the device, and the rest can click OK.

LAN add

Modify device

Device modification：In the device management or preview interface, after selecting the device and clicking Modify, the device interface will be loaded.

Regional modification：In the modify device interface, click the area drop-down box.

Group modification：After selecting the group under the device management interface, click the modify button to load the modified group information interface.

note：Modify the channel name, panorama, and channel type corresponding to the channel number in the device.

The panorama or channel type corresponding to each serial number is independent.

The channel device in the device needs to be in the panoramic state. You can select the corresponding channel serial number to modify the panorama. And channel type

Device modificationGrouping

Remote setting

VR CAM/gateway Remote setting

Setup steps：①Selected device ②Click Settings / Connect Device and click the Remote Settings button (as shown in Figure 1)

Device Information：Content includes device model, device ID, OEM serial number, firmware version (providing check updates)

Function setting：The audio, prompt tone, prompt language, and display mode and resolution can be set on the configuration.

Alarm system：The content includes motion detection, message push, motion detection sensitivity, and synchronization time function. If daylight saving time setting is available, you can set daylight saving time.

TF card settings：TF card status, available / total capacity, TF card formatting function

note：

①Alarm message push is not supported in local login. You need to check to switch to cloud login status.

②Currently supports VR CAM/gateway devices for remote setup

Remote setting interface

D82 series NVR remote setting

Setup steps：①Selected device ②Click Settings / Connect Device and click the Remote Settings button

Device grouping

Create a group：①Click the ‘Create Group’ button ②‘Enter the content in the group name box and click OK.

Add channel：

enter：①Select the created group ②Click the Add Channel button

Import selection：①Selected channel ②Selected group ③Click the import selection button

Import all：①Selected group ②Click to import all buttons

Modify/delete：

Edit: Select the group and click the Modify button to modify it.

Delete: delete the selected group or channel and click the delete button to delete

Create a groupAdd channelModify group

Video playback

Video playback

Playback four steps：①Select device channel ②Select video type ③Select playback date ④Confirm search video

Device channelVideo typeDate selection

Timed playback

Timed playbackTimeline

Video sync

Steps：①Retrieve video  ②Check sync  ③Switching time point

Video download

Batch download：Enter the time period to be downloaded at the start time + end time according to the needs of the retrieved recording time range.

Time period download：The time period of the video recording will also be displayed in the download resource. Click the download button for any time period according to your needs.

Custom bulk downloadSelect time period to download

Other functions

Playback control：Support playback/pause/stop control in video playback, select the screen form in playback and click operation

Time scale adjustment：The settings in the Setup Wizard are not set. The playback timeline scale will default to 60 minutes. You can also modify the scale value by clicking ‘Reduction’ or ‘Magnify’ during video playback.

Playback controlAdjustment scale

Live Preview

Connection/Disconnection

The list style is treeshape:

connection：

①Double-click on the selected device/channel to enter the connected video state.

②After selecting the device/channel, right click and select “Connect Video” to enter the connected video state (Figure 1)

disconnect：

③Double-click to disconnect the current connection after selecting the connected device/channel

④After selecting the device/channel, right click and select ‘Disconnect’ to disconnect the current connection.

Figure 1

List style is graphic：

①After selecting the device/channel, click the play button on the device list to enter the connected video status.

②After selecting the device/channel, click the stop button on the device list to disconnect the current connection status.

③Right-click operation connection/disconnection is consistent with the tree list style. The specific operation can be referenced.

Note：poor performance of the computer will directly affect the smoothness of the preview video. It is recommended that the number of channels connected to the device be gradually increased

Video/screenshot

Video：

①Click the Record button on the toolbar to enter the video recording status (as shown in Figure 1 below)

②After the video operation, click the record button again to stop recording.

Note：

①The actual recording duration is not equal to the time difference between the start recording time and the end recording time.

②If the device network is interrupted, the recording will succeed but no video file will be saved.

③The channel is maximized or minimized during recording, and the recording will stop.

Screenshot：

Click the screenshot button on the toolbar to enter the screenshot status (as shown in Figure 1 below)

Note：

①If the switching stream video is not loaded, the screenshot operation will be saved.

②The screenshot does not have the function of continuous screenshots. Clicking the screenshot button once will capture an image.

Figure 1

Panorama mode

enter：

①Double-click the channel screen to enter the maximized state, right click and select “panoramic mode” to switch to the panorama mode, enter the panorama, and the code stream is automatically switched to HD.

②The channel screen is in 1 split screen mode, and the panorama mode option is available on the right toolbar. Click to select to switch the panorama mode.

drop out：

①Click on Panorama mode on the right toolbar and select ‘Exit panorama’ to exit panorama mode

②Exit the panorama mode by exiting the screen from the split screen state.

Panorama modeCylindrical modeExpand modeSplit screen modeQuad screen modeSix-screen mode

Note：

①In the local login mode, you can select 6 display modes in the panorama mode, including: panorama, cylinder, expand, 2 split screen, 4 split screen, 6 split screen

②In the cloud login mode, you can select 4 display modes in the panorama mode, including: panorama, cylinder, split screen, quad screen

        Suspension: the direction of the cruise is clockwise

        Wall-mounted: the direction of the cruise swings left and right

       Speed: Cruise provides speed 3S / speed 40S / speed 60S three options, corresponding to slow / medium / fast three speeds

       Stop: Pause the current state of the cruise, left click on the channel in the cruise or select the stop cruise button in the cruise mode to click

Panorama modeInstallation modeCruise mode

PTZ control

Cruise / PTZ / Zoom / Focus / Aperture / Preset：

The PTZ control function can be used only when the PTZ device (such as a ball machine) is connected to the main control device (such as NVR or DVR).

Cruise is to directly perform the screen cruise operation. The pan/tilt is to adjust the lens direction and zoom to replace the mirror multiple.

PTZ speed level controlcontrolZoom, focusPreset

①：Adjust the PTZ control speed (default level is 6)

②：Adjust lens direction and cruise

③：Adjust the zoom and focus of the PTZ camera

④：Set and call the set bit, adjust the lens to the specified position, set the preset position, input the preset position later, click to call, the lens will automatically move to the specified position

Split screen number

When the number of connected device channels is greater than the current number of split screens, the displayed split screen will automatically increase, reaching 49 split screens.

Split screen number

Other functions

Other functionsIntercom

User login

Local login

①Enter account + password  ②Click to login

Login accountforget password

note:

Cloud login

Note:

①The cloud login should be logged in with the registered account (the account registered by the mobile app can be logged in)

②Registered account is recommended to use a valid mailbox, easy to retrieve passwords and other special circumstances

③After registering an account, you need to log in to the email address you entered during registration to activate the email address (click the received link to verify)

④The mailbox status is not activated, and cannot be retrieved after forgetting the password (activation period is two days)

⑤The first time you use EseeCloud_CMS, the software’s time zone will automatically sync with your computer, and you can change it later in the advanced settings.

Login accountRegister a new accountRetrieve password

Installation login

Installation and operation

Step 1: Run the EseeCloud_Setup_3.0.1.exe installation package

Step 2: Select the display language when installing

Step 3: Read and determine whether to accept the agreement

Step 4: Determine the path to the installation

Step 5: Installation is complete and you can choose to run immediately

1. Running program2. Choose a language3. Reading agreement4. Determine the path5. The installation is complete

Introduction to EseeCloud CMS

Function introduction

CMS is called Camera Monitor System. It is a camera monitoring client for online preview image, video storage, remote playback, device management, video/screen download and other functions. 

It is suitable for DVR, NVR, IPC, VR CAM, Wifi IPC and other devices.

Camera suitable for IP PRO, VR CAM, EseeCloud app.

CMS has the following characteristics

 Interface containerization processing mode: In the interface design of the client component, the containerized processing is carefully adopted, which simplifies the processing mode of multi-screen and single-screen switching, greatly improves the multi-screen operation feeling, and adapts to the development trend of a multi-screen PC.
.

Channelized management mode: In the client component design, channelized management mode is added, and the traditional design mode with device as the core subject is abandoned, which is more suitable for the development direction of IP monitoring.

Operating environment

Operating system:Microsoft Windows7 / Windows 8 / Windows 10 (32/64 bit Chinese and English operating system)

OSX 10.9 or higher (64-bit Chinese and English systems)

CPU：I3/2.4GHZ or more

Memory: 4GB or more

Graphics card: integrated graphics (Intel HD 4000 and later), discrete graphics (NVIDIA GeForce GTX 460 and later)

note

Preview multiple video or high resolution video at the same time, requiring higher hardware configuration and network bandwidth

Foreword

Foreword

Welcome to use our products! We are very honored to get your trust.

In order to have a general understanding of our product CMS and facilitate your use, we have specially configured this manual for you, including the function introduction, operation steps, precautions, etc., which are essential guides for your use of this product.

Please read the instruction manual carefully before use. I believe it will be of great help to your effective use of this product. In addition, if you have any questions during the use, please feel free to contact us, we will be happy to serve you.

Applicable Model

This manual is for the camera monitoring system CMS.

Statement

This manual may contain areas where the product functions or operations do not match, or where the technology is inaccurate, or a typographical error. For such problems, our company will update the manual content according to product updates, and regularly update the hardware and software products described in this manual. The updated content will be added to the new version of this manual without prior notice.

The contents of this manual are for reference guidance only, and are not guaranteed to be identical to the actual product. Please refer to the actual product.
.

Agreement 

In order to simplify the description in this manual, make a convention:

The camera monitoring system CMS is referred to as CMS or software for short;

DVR, NVR, IPC, VR CAM, WIFI IPC equipment, etc., collectively referred to as equipment;

Click for the left mouse button click, double click for the left mouse button to double click;

Some pictures are schematic, please refer to the actual interface of the software;

A “note” hint text may appear in this article to indicate that the operation is potentially risky, and ignoring the text may result in errors or unpredictable results.

Cloud storage details

Features

1. What is cloud storage? The cloud storage function is a video storage function developed based on technologies such as moving object detection. Cloud storage is divided into two types: alarm recording and full-day recording. Alarm recording refers to triggering the camera alarm when someone passes by or moves in front of the camera. The camera will automatically record and upload it to the Cloud Space Security Center for encryption. You can use it with confidence.  

 Tips:  

 (1) As long as you purchase the cloud storage service, you can get the corresponding cloud space. For example, if you purchase the cloud deposit monthly package, the cloud space is valid for one month, and it will take effect from the successful purchase. 

(2) The storage time of cloud storage video is determined by the type of package. If you open the cloud storage package for 7 days, the camera cloud video storage period is 7 days. The 30-day cloud storage package will be opened, and the camera cloud video storage cycle will be upgraded to 30 days. If you open a 7G/month cloud storage package, then your cloud recording storage space is 7G in this month. After the space is full, the cloud recording will not be saved. The stored video will be saved for one month.  

 2. What are the advantages of cloud storage? The video is safer: the video cloud storage can not steal, safe and reliable. More efficient viewing: generate alarm video in real time, quickly grasp the alarm situation, the video is clear and smooth without jamming Cloud storage: Camera video is stored in cloud space, no space limit, and unlimited cloud storage space.

Cloud deposit purchase and exchange

1. How to buy a cloud storage package?
Click the device list device “Cloud Record” button or the personal center “Cloud Mall” – enter the “Cloud Mall” interface – click “Switch” to select the device you want to purchase and the device channel – automatically select the appropriate package for you after the selection is completed – click ” Buy now” Once the payment is complete, you can turn on device cloud storage.
Tips:
(1) Cloud deposit does not support return and exchange after purchase, and does not support refund;
(2) The purchase channel of the device is determined by the number of package service channels of the system. If the system has only two packages with service channels 1 and 3, then the device can only select 1 or 3 purchase channels;
(3) Cloud storage is only bound to the purchase user. The device with the cloud storage is deleted and added to the new account. Under the new account, the device will not be able to continue to enjoy the cloud storage;
(4) Cloud storage is purchased by a single device and device channel, and multiple devices and multiple channels need to correspond to multiple cloud storage packages;

2. How to redeem the cloud storage package?
Click the device list device “Cloud Record” button or the personal center “Cloud Mall” – enter the “Cloud Mall” interface – click “Use Cloud Saver Code” – enter the “Scan Redemption Code” interface, scan the valid redemption code – enter the ” redemption code” Payment interface” – select the device and channel to be redeemed – click ” redeem now” to complete the redemption

Tips:
(1) The number of channels for redemption Device is determined by the number of package service channels generated by the redemption code (if the service channel of the redemption code package is 4, then the device can only select 4 channels to purchase);
(2) There is no charge for redeeming the code cloud storage package using the redemption code, and each redemption code can only be used once;

Cloud video introduction

 Cloud recording is divided into two types: alarm recording and full-day recording.

Alarm recording, the video will only be uploaded when the camera detects that someone has passed, the item has been moved, and the camera alarm is triggered.

Recording all day means that the camera will automatically record when it is online and in good condition. It will be detected 24 hours a day and encrypted and uploaded to the cloud space.

The cloud video is lost when the device is deleted, the device uploads the cloud video, and the device is disconnected from the network. The device and the server are disconnected. The device network bandwidth is insufficient and the device cannot upload video and video.

After purchasing the cloud storage package, the cloud recording function will be automatically enabled.

You can click the “Cloud Recording” button corresponding to the device list to enter the cloud recording interface. Click the cloud storage service icon to enter the “Cloud Storage Service” – disable the cloud recording function.

Tips: After the cloud recording function is turned off, the validity period of the cloud storage will not be extended;

Cloud retention period

1.Cloud deposit validity period
Cloud deposits take effect from the date of purchase, that is, the validity period of cloud deposits is: “at the time of purchase” to “the same time point after one month / one year later”. For example, the cloud deposit package of 7 days/month was purchased at 0:00 on April 1, 2019, and the validity period of the cloud deposit is a natural month. It is: 0:00 on April 1, 2019, and O:00 on May 1, 2019.

Tips: The validity period of the channel cloud is the sum of the time of all the cloud storage packages in the channel. For example, channel 1 purchased two 7-day/ month cloud storage packages at 0:00 on April 1, 2019, then the cloud storage validity period is: 0:00 on April 1, 2019, and June 1, 2019. 0:00 on the day.

2. Can the cloud validity period be suspended?
Cloud storage is timed from the date of purchase, and will not stop during the time. after the user purchases the cloud storage, the action of deleting or stopping the uploading of the video can not affect the cloud expiration time

Cloud storage renewal

1. How to renew the cloud deposit package?
(1) Conditions for cloud surviving fee: The current device has purchased the cloud storage channel to purchase or renew the cloud storage package;
(2) Process of cloud surviving fee: Click the device “Cloud Recording” to enter the cloud recording interface click the “Cloud Storage Service” icon to enter the cloud storage service – select the channel to renew the fee – click the “Renew Now” button below to enter the cloud mall interface – Select the channel and package for renewal of the device – click on the renewal fee immediately to complete the renewal.

Tips: When you are renewing, if the renewal plan are using the package and the other channels of the package meet the renewal conditions, it will default to select previous package and channel.

Cloud storage migration

1. Unbound cloud service migration

(1) Conditions for migrating cloud services: The current account has a cloud storage service of unbound devices;

(2) Migration cloud service process:
After the device is added successfully, if the device meets the service migration conditions, the migration prompt box is displayed. After confirming, select the service that needs to be migrated to the newly added device, and click “Migration”.

If the device is a single-channel device, the device migrates directly to the device list interface. If the device is a multi-channel device, you need to select the number of channels equal to the number of services to migrate.

2. Offline device cloud service migration
(1) Offline device cloud service migration conditions: the current account has offline devices that have been bound to the cloud service;
(2) Migration process:
After the device is successfully added, if the device meets the service migration criteria, the migration prompt box is displayed. After the determination, the device iumps to the miaration interface.

b. Select an offline device to migrate. If the offline device is multi channel, you need to select the migrated device channel.

If the device is a single-channel device, the device migrates directly to the device list interface. If the device is a multi-channel device, you need to select an equal number of channels to migrate.
Tips: Do not migrate all day recording cloud services to NVR devices

FAQ

When added by LAN or cloud lD,indicate “device is not online” or “device is not registered”

1.Please make sure the network is normal and already enable DHCP on router.

2.lf users manually change network parameter of device,please change it to default parameter. Just press reset button for 10 seconds.

.

Device is online and there happen alarm , but cellphone gets no message?

1.Please make sure the APP is on and allowit to get APP push message,then it can get alarm notification.

2.After enable push message,check cellphone setup-application management,find out the “Eseecloud ” and enable to get push message.

.

Indicate “SD card error” after insert SD card.

1.Only support SD card max 128GB and FAT32 format. If the system file is error,please formart the SD card and choose FAT32 format.

2.When SD card is ruined or file system is wrong,please try to change or re-format the SD card.

.

Why the playback recording video content is uncontinuous?

1.For saving the room of SD card and extend the lifetime,device will only make recording when detect the actived image ,that’s why the recording content is uncontinuous.

.

Can the device support be powered by USB or power bank?

1.Suggest to use original power adapter. If use other adapter with the power is not stable,the device may be damaged.

.

Device preview help

Different devices support different functions. Preview interface only shows the functions supported.

.

<p>The post EseeCloud Wireless Security Camera System Installation first appeared on NVR IPCAMERA SECURITY.</p>

IMPORTANT – Alibi Vigilant IP Camera Firmware Update:

We have released a new version of firmware for Alibi Vigilant IP cameras that fixes the ability to reset passwords for IP cameras. If you want to enable this functionality on installed Vigilant IP cameras, we recommend you click the following link to find complete directions to download the new software to upgrade your IP cameras.

Alibi Vigilant IP Camera Firmware Installation Instructions

Alibi Vigilant IP Camera Control 4 Connection Driver

If you have further questions, please contact Technical Support for assistance at 888.858.1442.

IPC_D1202 Firmware for the following camera models.

ALI-FB20-W, ALI-FB20, ALI-FB20-Z
ALI-FB40-W, ALI-FB40, ALI-FB40-Z
ALI-FD20-V, ALI-FD20-VZ
ALI-FD40-V, ALI-FD40-VZ
ALI-FT20
ALI-FT40

Alibi IP Camera Firmware

Read Next :

1. GW Security NVR IPCAMERA Firmware
2. How to Upgrade NVR Firmware for Amcrest
3. New Chinese IP Camera Firmwares Update

IPC-G6107 Firmware for the following camera models.

ALI-FB80
ALI-PD40-VZA
ALI-FD80-V
ALI-PT40-ZA
ALI-FT80
ALI-PB40-ZA
ALI-PB40-A
ALI-PD40-VA
ALI-PT40-A
ALI-PM40-A

DIPC-B1209 Firmware for the following camera models.

ALI-FB20-U
ALI-FD20-VU
ALI-FT20-U

DIPC-B1226 Firmware for the following camera models.

ALI-FB20-AW
ALI-FD20-VAW

DIPC-B1211 Firmware for the following camera models.

ALI-FB40-U

GIPC-B6102 Firmware for the following camera models.

ALI-PS40-A
ALI-PT40

GIPC-B6106 Firmware for the following camera models.

ALI-PF50-A
ALI-PB80
ALI-PT80
ALI-PZ50-ZA

CIPC-B2302 Firmware for the following camera model.

ALI-PZ51-UZA

QIPC-B1203 Firmware for the following camera models.

ALI-XB80-ZA
ALI-XD80-VZA
ALI-XT80-ZA
ALI-XF120-A

QIPC-B2202 Firmware for the following camera models.

ALI-PZ21-UZA
ALI-PZ40-VUZAI
ALI-PB40-VUZAIE
ALI-PB80-VUZAIE

CIPC-B2302 Firmware for the following camera models.

ALI-PZ20-ZA

CIPC-B2302 Firmware for the following camera models.

ALI-PZ20-LZA

CIPC-B2302 Firmware for the following camera models.

ALI-PZ20-LUZAI

QIPC-B8701 Firmware for the following camera models.

ALI-XF80-LA

DIPC-B1216 Firmware for the following camera models.

ALI-FB21-A
ALI-FB21-Z
ALI-FD21-V
ALI-FT21-A

GIPC-B6202 Firmware for the following camera models.

ALI-FB21-UAI, ALI-FB41-UA, ALI-FB41-UZA
ALI-FD21-VUAI, ALI-FD41-UVZ, ALI-FD41-VU
ALI-FT21-UAI, ALI-FT40-UZA, ALI-FT41-UA
ALI-PB40-UAI, ALI-PB40-UAIE, ALI-PB40-UAIS, ALI-PB40-UZAI, ALI-PB40-VLUAI, ALI-PB50-UAI, ALI-PB50-UZAI, ALI-PB50-VLUAI
ALI-PD40-VUAI, ALI-PD40-VUZAI, ALI-PD50-VUAI, ALI-PD50-VUZAI
ALI-PM41-VAI
ALI-PT40-UAI, ALI-PT40-UAIS, ALI-PT40-UZAI, ALI-PT40-VLUAI, ALI-PT50-LUAI, ALI-PT50-UAI, ALI-PT50-UZAI
ALI-PZ50-LUZAIS

GIPC-B6202 Firmware for the following camera models.

ALI-PB60-UA, ALI-PB60-VUZA
ALI-PD60-VUA, ALI-PD60-VUZA
ALI-PT60-UA, ALI-PT60-VUZA

GIPC-B6203 Firmware for the following camera models.

ALI-FB81-UA
ALI-FD81-VUA
ALI-FT81-UA
ALI-PF51-VA
ALI-PT50-VUAIF
ALI-PB50-UAIF
ALI-PB81-AI
ALI-PD81-AI
ALI-PT81-AI
ALI-PB80-VLUAI
ALI-PT80-VLUAI
ALI-XB81-UZAI
ALI-XD81-VUZAI
ALI-XT81-UZAI

GIPC-B6208 Firmware for the following camera model.

ALI-PF40-LUA

ANPR-B1103 Firmware for the following camera model.

ALI-XB20-VUZAI-ANPR

Alibi Witness IP Camera Firmware and Manuals

Looking for firmware? Find the latest firmware downloads, release notes and firmware instructions for current and discontinued Alibi IP cameras.

Alibi IP Camera Network Setup Guide

Alibi NS20, NS21, NS40, NS41 Series Network IP Cameras

Includes SKUs – ALI-NS1025VR, ALI-NS2012R, ALI-NS2012VR, ALI-NS2112VR, ALI-NS2122VR, ALI-NS2013VR, ALI-NS2023R, ALI-NS2014VR, ALI-NS2024R, ALI-NS2114VR, ALI-NS2015VR, ALI-NS2015VRB, ALI-NS2025R, ALI-NS2025RB, ALI-NS2016VR, ALI-NS2016VRB, ALI-NS2026R, ALI-NS2036VR, ALI-NS2036R, ALI-NS2018VR, ALI-NS2028R, ALI-NS2118VR, ALI-NS2128R, ALI-NS2038R, ALI-NS4012R, ALI-NS4022R, ALI-NS4112R, ALI-NS4013R, ALI-NS4023R, ALI-NS4014R, ALI-NS4024R, ALI-NS4114R, ALI-NS4015R, ALI-NS4015RB, ALI-NS4025R, ALI-NS4016R, ALI-NS4016RB, ALI-NS4026R, ALI-NS4036R, ALI-NS4018R, ALI-NS4028R, ALI-NS4118R, ALI-NS4128R, ALI-NS4038R

Alibi NS1028VR

Includes SKUs – ALI-NS1028VR

Alibi 7012 Series Network IP Cameras

Includes SKUs ALI-NS7012R, ALI-NP7012RT

Alibi 7022 Series Network IP Cameras

Includes SKUs ALI-NP7022RT

Alibi NS Series Network IP Cameras

Includes SKUs ALI-NS1012VR, ALI-NS1014VR, ALI-NS1022R, ALI-NS1024VR, ALI-NS1032VR, ALI-NS1034R, ALI-NS1044VR, ALI-NS3012R, ALI-NS3014R, ALI-NS3022R, ALI-NS3024R, ALI-NS3034R

Alibi ALI-NS1132VR IP Camera

Includes SKU ALI-NS1132VR

Alibi ALI-NS1144VR, ALI-NS3134R IP Cameras

Includes SKU ALI-NS1144VR, ALI-NS3134R

Alibi ALI-NP1028VR IP Camera

Use with SKU ALI-NP1028VR

Alibi ALI-NP7022RT-B IP Camera

Use with SKU ALI-NP7022RT-B

Alibi NP (10 & 30 Series) Network IP Cameras

Includes SKUs ALI-NP1013VRH, ALI-NP1016VRH, ALI-NP3013RH, ALI-NP3016RH, ALI-NP3012RH

Alibi NP (70 Series) Network IP Cameras

Includes SKU ALI-NP7012RT

Alibi NZ60 Base Station for ALI-NZ60 Series Mini IP Cameras

Includes SKU ALI-NZ60

Alibi IPZ Series Network IP PTZ Cameras

Includes SKUs ALI-IPZ5030T, ALI-IPZ5030RT

Alibi IPC 3000 Series Network IP Cameras

Includes SKUs – ALI-IPU3013R, ALI-IPU3030R, ALI-IPV3013R, ALI-IPV3030R, ALI-IPD3030R, ALI-IPV3030RV, ALI-IPU3030RV, ALI-IPU3130R, ALI-IPU3230R, ALI-IPV3113R, ALI-IPV3130R

Alibi IPC 5000 Series Network IP Cameras

Includes SKUs – ALI-IPV5030RMH, ALI-IPU5030RMH

2MP IP Dome 75′ IR 2.8mm DWDR H.264+

Includes SKU – ALI-NS1002VR

MP Starlight 165 Feet IR WDR IP Bullet Camera with Siren and Lights

Includes SKU – ALI-NS4224RI

Alibi Fisheye Cameras

Includes SKUs – ALI-NS1006RP, ALI-NS1006VRP, ALI-NS1012VRP

Includes SKUs – ALI-IPV5060RP

<p>The post Alibi IP Camera Firmware first appeared on NVR IPCAMERA SECURITY.</p>

Issue:

A password has been set on a camera and neither the customer nor integrator knows it.

For best results see the below:

• Once a nonce file has been generated, do not do anything with the camera (i.e. power cycle it) until you are ready to apply the key files. If the camera was power down before the reset code was applied then a new Noncefile will have to be generated and reapplied.
• Nonce files are valid for approximately 24 hours. If it does not work reach out to technical support.
• Directly connect to the camera with a PoE injector for the best results.
• Disable any firewall or security software on the workstation.
• Disable sub-interfaces on the Ethernet adapter
• Disable any wireless adapters.
• IMPORTANT: If the camera says “Inaccessible” your workstation is not in the same network range as the camera. Change the workstation to match the camera and delete IP address from the “Advanced TCP/IP Setting” menu. Relaunch AV IP Utility and it should say “Pwd Protected.”
• IMPORTANT: We have encountered issues resetting passwords over Ubiquiti Wireless networks. If a password reset fails, connect directly to the same physical switch as the camera.
• IMPORTANT: For Verint Systems, remove the camera from the VMS then attempt a password reset. Password resets performed while connected to a Verint system have failed.

Resolution:

1. Download and install AV IP Utility: https://sales.arecontvision.com/software.php
2. Click on a camera. If needing a password reset for multiple cameras, press CTRL and click on each camera needed. It/They should be highlighted blue.
3. Click Passwords > Reset Passwords > Create Nonce / Magic Code File.
4. Save and email this file to Technical Support (support@arecontvision.com).
   • Do not do anything else with the camera until you upload the file provided by Technical Support.
5. Click Passwords > Reset Passwords > Reset Passwords.
   
6. Click Yes.
7. Click OK.
8. Locate the key that was provided by Technical Support and click Open.
9. The camera status should change from Pwd Protected to Accessible within 30 seconds.
10. If the password reset fails you will need to follow the instructions here: Password Reset Failure

Arecont Vision Password Reset

Password Reset Failure

<p>The post Arecont Vision Password Reset first appeared on NVR IPCAMERA SECURITY.</p>

The software is easy to deploy and operate, suitable for smalland medium-size applications such as for super market, parking lot and residential area.For more details, see datasheet.

Directly connected camera: Camera that is directly managed by the software (in comparison with NVR connected camera).
NVR connected camera: Camera that is managed by the software via an NVR (in comparison with directly connected camera).
IPC: IPC, IP camera and camera refer to the same thing in this manual.
PC: The computer that runs the software, also mentioned in this manual as the client.

NOTE：

The 64-bit OS and software are recommended. Live view and playback consumes RAM, and the 32-bit software has a relatively small RAM. When RAM is running low, the software will be unable to play more channels of live or recorded videos, and it will display a message indicating insufficient RAM.

Installation and Startup 

1. Double-click the .exe file, and follow the wizard to complete the installation.
2. When installation is complete, double-click the shortcut icon to start the software.
3. Log in with the default username/password (admin/123456).
4. You see the main page when logged in. The main page includes the control panel, some functional buttons and the system menu.

NOTE：

• The default password is intended only for the first login. For security, please set a strong password when logged in (see User Management). A strong password shall include at least nine characters comprising all three types: digits, letters, and special characters. Please keep the password safe and change it regularly.
• The password for admin (123456 or others) does not change after an upgrade or a reinstall of the software.
• For first time use, a config wizard will guide you to add devices and start live view. The wizard uses the default username (admin/123456) to add devices.

GUI Introduction 

The main page is displayed after you log in. The main page consists of the control panel and some functional buttons.

The control panel includes the Common and Basic/Smart areas. Click an icon to access the corresponding module. You may drag an icon to change its position with another icon.

Click the buttons in the top right corner:

Icon	Description
	Menu. Click an icon on the menu to access the corresponding module.
	Change appearance. You can choose the light or the dark theme color for the client.
	Switch account.
	Lock the GUI
	Open configuration wizard, user manual, view version number and update information. Note: If updates are available, you can click to view details and download the new version.

The buttons in the bottom left corner: 

Icon	Description
	View realtime alarms, turn on/off alarm sound, enable/disable alarm-triggered live video.
	View alarm triggered live video.
	Download recording.
	View and manage download tasks.

Device Management 

Devices include encoding devices, decoding devices, cloud devices, access control devicesand network keyboards.

The software supports up to 64 local devices and 64 cloud devices, up to 512 local channels and 512 cloud channels.

Encoding Device 

Add Device 

Encoding devices include IPC (also referred to as IP camera,camera, or video channelin this manual), Network Video Recorder (NVR)and hybrid NVR.

NOTE:

• Managing a device with different management software programs may cause unexpected problems.
• Please always add devices as admin (enter username “admin”).

Click Device Managementon the control paneland then follow the steps:

1. Click Device > Encoding Device. The page is divided into two areas with two lists:

• Online Device list: The software searches online devices and refreshes automatically. Note: The discovered devices are not added yet, and you need to add them manually (see step 2).
• Managed Device list: lists devices that have been added to the software.

2. On the Online Device list, select device(s) and then click Add. You may add devices to different groups.

The software uses the default username (admin/123456) to add a device. If the password of a device has been changed and is not 123456, you need to change the password in step 3.

In the Online Device list, you may:

• Click Refreshto refresh the list.
• Click Search Configto specify a network segment to search.
• Right-click a device to visit itsWeb interface.

3. On the Managed Device list, check the status of the added devices and do the following:

To	How To
Add device	1) Click Add. 2) Choose a mode. The device username (admin) and password are always required, regardless of the mode you choose. IP/Domain: Add a device with a known IP address. IP Segment: Add multiple devices with continuous IP addresses. MyDDNS: DDNS must be enabled on the device and port mapping must be completed beforehand. See Appendix for details. 3) Click Add to add to the default group, or Add to Group to add to a specified group.
Edit Device	Select device(s) and then click Edit. This button is especially useful when you want to set the same username and password for adding multiple devices.
Delete device	Select device(s) and then click Delete. The deleted online devices are still on the Online Device list.
Sync time	Click TimeSync to sync your PC’s system time to the selected devices.
View device status	Click Status to view device online/offline status, alarm subscription status, recording status, and storage medium status. You may refresh manually or set an interval to refresh automatically.
Use buttons in the Operation column	: Edit device name, IP address, username/password. If the device status is Offline(incorrect username or password), click this button and change the password to the actual password. You may also double-click to edit a device.  : Configure image, encoding and OSD settings of a device (see Configure an Encoding Device).  : Visit the Web interface of the device.  : Restart device.

Configure Device 

On the Managed Device list, click  for an online device to configure image, encoding,OSD and temperature measurement settings without opening the Web interface of the device.

NOTE:

• This function requires device support and it may be unavailable if the device version is too low.
• Temperature measurement parameters are available to thermal cameras only.
• The configurations displayed may vary with device version and how the device is managed.
• For detailed explanations of image, encoding, OSD and temperature measurement parameters, please see device user manual.
• OSD configuration is not available on Mac OS.

The changed image and OSD settings take effect immediately. Encoding and temperature measurement settings must be saved first before they take effect.

For an NVR, you need to select a camera from the drop-down list.

When configuring OSD, you can double-click the image to display in full screen; the blue boxes (Area1, 2 …) appear only in the preview and do not display on the live view image. You can drag an OSD to relocate it.

Group Management 

You can create groups and manage cameras in different groups.

1. Add a group. 

2. Import cameras to the group. 

To import cameras: click the group on the right, select cameras on the left, and then click Import Selected. To import all cameras, click Import All.

To remove a camera from a group, place the mouse pointer on the camera and click Delete.

To rename a camera in a group, place the mouse pointer on the camera and click Rename.

Decoding Device 

You need to add device before you can use the video wall function. The steps are similar to adding device. See Add Device for reference.

Note:Add device as admin.

Cloud Device 

The software can manage up to 64 cloud devices simultaneously, including your own devices and devices shared from other cloud accounts. If the total number of cloud devices exceeds the limit,
you can click Device Details and use the Add Manage or Cancel button to specify the cloud devices you want to manage.

Click Device Management on the control panel and then follow the steps.

1. Click Device > Cloud Device.
2. Click Register to sign up for a cloud account; if you already have one, proceed to step 3.
3. Enter your username and password for your cloud account, and then click Login. Devices under your cloud account are listed, including your cloud devices (under My Cloud Device) and devices shared from other cloud accounts (under Shared Cloud Device).

Use the buttons under Operation to edit device name, configure image, encoding and OSD settings, open the Web interface of the device, or restart a device.

Click Cancel to cancel the management of a device without deleting the device from the cloud account.

Click TimeSync to keep a device synchronized with your PC’s system time.

Click Device Details to add, edit, delete cloud devices, to share or cancel sharing, to manage or cancel management.

Click Add to add device(s) to your cloud account (the register code required is displayed in the Web interface of the device; see device user manual for details); click Delete to delete device(s) from your cloud account.

Click Add Manage to add device(s) to the software; click Cancel to cancel management without deleting the device from the cloud account.

Double-click a device or click Edit to change the device’s name. To sync the new name to cloud, select Sync to Cloud.

Click Share to share device(s) with another cloud account. Set a sharing period and permissions as needed. The permissions are pre-configured on the device.

Click Sharing Records to view sharing history or cancel sharing(s) with other cloud accounts.

Click Cancel Sharing to cancel sharing(s) from other cloud accounts.

Access Control Device 

See Add Device for the steps to adding an access control device . Please add access control devices as admin.

Network Keyboard 

A network keyboard can be used to con trol live video , PTZ camera and sequence resource on a video wall wall.

The following steps describe how to play live video on a video wall. Before you start, refer to the keyboard user manual to connect the keyboard to your PC. And then, click Device Management on the control panel and follow the steps.

1. Add a camera. On the Camera tab, click Add, select the camera to play on the video wall and click OK. The camera appears on the list.

You will use the number (e.g., 222) later when operating the keyboard.

2. Add a video wall. On the DX Video Wall tab, click Add, select a video wall and then click OK. You need to configure video wall first. See Video Wall for details.

You will use the number (e.g., 1) later when operating the keyboard.

3. Add a sequence resource. On the Sequence Resource tab, click Add, select a sequence resource and then click OK. You need to configure sequence resource first. See Sequence Resource for details.

You will use the number (e.g., 1) later when operating the keyboard.

4. The following operations are on the network keyboard.

a. Enter the keyboard number in step 2 (e.g., 1), then press AUX4.
b. Enter the window number in the top left corner (which is 1 in both A and B), then press MON.
c. Enter the split-screen number, then press WIN. If the window is split (as in A), enter the split-screen number 3; if the window is not split (as in B), enter 1. This step is only required for playing live video on video wall. For playing sequence resource, skip this step.
d. Select the camera or sequence resource to play on the video wall.

• Live video: Enter the keyboard number in step 1(e.g., 222), then press CAM.
• Sequence resource: Enter the keyboard number in step 3 (e.g.,1),then press CAM_G.

5. After live video starts on the video wall, you can:

• Use the joystick to control the rotation of a PTZ camera, and use the Zoom and Focus buttons to control the zoom and focus.
• Use the button to switch live video to recording.

See keyboard user manual for more information.

Live View 

Click Live View on the control panel to view live video from cameras.

Play Live Video 

1. On the Camera tab, double-click a camera or drag it to a window to start live video.

2. Right-click a camera to choose a stream type, rename the camera, view/change alarm output status.

View/change alarm output status: Right-click an IPC or a channel under an NVR to view or change its alarm output status. Alarm output needs to be configured beforeh and on the device.

Or, hover the mouse on an NVR, click  to view or change the alarm output status of the NVR and all the channels under it . Click the button in the Operation column or the button on the top to change alarm status.

3. You may drag the image to play it in another window.

4. Double-click a window to maximize it, and double-click again to restore.

After maximizing a window, move your mouse to the left or right side on the live view page, and then click or to switch to the live video of previous or next channel.

5. Use the live view toolbar or window toolbar during live view.

Play Live Video by View 

By default view 

On the View tab, double-click a default view or click Play to start live video from the corresponding number of cameras on the camera list: 4 cameras for 4-split view, 9 for 9-split view, 16 for 16-split view, and 25 for 25-split view.
Take the 4-Split view as an example.

Live video from the first 4 cameras on the camera list will be played, illustrated as below.

By custom view 

Play live video from specified cameras by a custom view.

1. On the View tab, click the Add View button to create a view. You may also click View on the control panel to add a sequence resource.

2. Select a window layout. Click  to edit a custom layout, use Combine or Undo when editing.

3. Drag cameras or sequence resources to the intended windows one by one.

4. Click OK. 

5. Double-click the custom view or click Play to start live video from cameras (specified in step 3) in the corresponding windows in the layout (set in step 2).

Live View Control 

Live View Toolbar 

The live view toolbar is at the bottom of the live view window.

Live View Window Toolbar 

The window toolbar appears when you place the mouse pointer on a live view window. The toolbar is effective only to the current window.

The toolbar shows  when the camera is a PTZ camera. Click this button to open the PTZ control panel.

The toolbar shows  when the camera is a fisheye camera. Click this button to open the fisheye control panel.

The toolbar shows  when the camera is a multi-sensor camera. Click this button to enable tracking mode.

Live View Shortcut Menu 

A shortcut menu appears when you right-click a live view window. Some items on the menu provide same functions as the live view toolbar and window toolbar. Some are described in the table below.

The default stream type is auto.

• For local devices, the client chooses a stream type according to the screen layout.
• 4 windows or less: Main stream
• 4 to 16 windows(16 included): Sub stream
• More than 16 windows: Third stream
• For cloud devices, the default is third stream.

PTZ Control 

Control the rotation direction and speed, pan/tilt/zoom, focus of a PTZ camera. The software also provides other functions including 3D positioning, preset, and patrol functions.

PTZ control is available to PTZ cameras only and it may vary depending on the camera’s capability and the protocol it supports. For example, some manufacturers reserve certain presets for special use such as wiper or menu. Please refer to camera specifications before use.

PTZ Control Panel 

Click on the live view window toolbarto open the PTZ control panel, which can fold and expand.You can also move the control panel to the left by clicking .

ParamEter	Description
	Control rotation direction or stop rotation. Tip: You may also use shortcut PTZ control to rotate the camera: place the mouse pointer on the live view window, and when the shape changes to like , click and hold the left button to rotate the camera. You can enable or disable Shortcut PTZ Control under System Configuration > Audio & Video. Shortcut PTZ control is not effective when 3D positioning is enabled.
	Adjust focus and zoom.
	Control the light. Control the wiper. Control the IR. Control the heater. Control the snow removal function.
	Adjust rotation speed.
	Click the tab to enable/disable 3D positioning. With 3D positioning enabled: Click somewhere on the image, and the camera automatically rotates toward the direction. Drag the mouse from top to bottom to zoom in on the selected area. Drag from bottom to top to zoom out.
	Preset tab.
	Patrol tab.
	Auto Guard tab.

Preset 

Add a preset to save the status of a PTZ camera. When needed, you can rotate the camera to the previously set position with one click of the button. Presets are also used to set a preset patrol (see Preset Patrol).

1. Rotate the camera to the desired direction.

2. On the Preset tab, click Add Preset. Enter a preset number that is not in use; otherwise, the existing preset will be replaced by the new preset.

Preset Patrol 

The camera patrols along multiplepresets in the set order and stays at each preset for certain length of time. Because apreset patrol route consists of presets, you need to add all the needed presets first(see Preset).

1. On the Patrol tab, click Set Patrol.

2. Click Add, select a preset, and set the length of time that the camera stays at this position. Repeat this step to all the necessary presets.

3. Use the Set Top, Up, Down, Set Bottom buttons to adjust the order in which the camera patrols.

4. Click Save.

5. The patrol route appears in the patrol route list. Click Start Patrol, and the camera will patrol along the presets that you have set.

Recorded Patrol 

The user operates the camera, and meanwhile the software records the movement track and statusof the camera and saves it as a patrol route.Currently one recorded patrol route is supported.

1. Click Start Recording Patrol Route ().

2. Use the directional buttons or shortcut PTZ control to rotate the camera to desired directions and stay for the intended length of time. Adjust zoom and focus as needed.

3. Click Stop Recording Patrol Route. The recorded patrol route appears in the patrol route list (by the name 0[Recorded Patrol]).

4. Click Start Patrol (). The camera will repeat the actions you performed during the patrol.

Auto Guard 

After auto guard is enabled, the camera performs the action(start patrol or go to the preset)as configured if no operation is made during the specified time period.

Fisheye Control 

Fisheye control, set mount mode and display mode to get desired images:

• Mount: Ceiling, Wall, Desktop
• Display Mode: Original Image, 360° Panoramic+1 PTZ, 180° Panoramic, Fisheye+3 PTZ, Fisheye+4 PTZ, 360° Panoramic+6 PTZ, Fisheye+8 PTZ, Panoramic, Panoramic+3 PTZ, Panoramic+4 PTZ, Panoramic+8 PTZ (clicking Original Image switches from dewarping mode to normal mode).

The fisheye control button is available to fisheye cameras only.

• In dewarping mode, you may click a PTZ window and then use the mouse to drag the image, or zoom in/out using the scroll wheel; or click a panoramic window and then drag, zoom in or out on the demarcation area.
• Digital zoom is disabled in dewarping mode, and the digital zoom button is hidden. If you switch to dewarping mode when digital zoom is enabled, digital zoom will be disabled automatically, and the image restores its original size.
• Dewarping mode is not available when resolution is below than D1, and the fisheye control button is grayed out.
• Fisheye control is not available on Mac OS.

Tracking Mode 

Intracking mode, if you play main stream ofthe multi-sensor camera, the camera will automatically track the objects that trigger the set alarm rule.

1. Click in the live view or playback window toolbar. The window is split into multiple windows: one big window showing the panoramic image, and multiple small windows showing PTZ images. The boxes on the panoramic image match the PTZ images.

2. Perform the following operations as needed: 

• Drag a box in the panoramic image to change the range of the corresponding PTZ image.
• Scroll your mouse wheel on a box or a PTZ image to zoom in or out.

To use auto tracking function, you need to enable perimeter protection function for the camera first.

• Enabling tracking mode will disable digital zoom.
• Tracking mode is not available on Mac OS.

Sequence Display 

Sequence Resource 

Play live video from cameras in a group one by one in a window. First,you need to create a sequence resource.

Create a sequence resource 

1. On the Live View page, click the Sequence Resource tab, and then click the Add button. You may also click Sequence Resource on the control panel to add a sequence resource.

2. Complete settings in the window, including sequence resource name, sequence interval, video channels to include, stream type, preset (PTZ camera). Click the Top, Up, Down and Bottom buttons to adjust the sequence as needed.

3. Click OK.

Play a sequence resource 

Double-click the sequence resource on the Sequence Resource tab to start sequence display.

Sequence View 

Sequence a default view 

Play live video from cameras on thecamera list in sequence based on a default view.

1. On the View tab, click the Sequence Display button for a split view. Take 4-Split view for example.

2. Set sequence display interval. 

3. Assume there are eight cameras, and the sequence interval is set to 20 seconds. Then the sequence is illustrated as shown below.

Sequence custom views 

Play live video by custom views in sequence.

1. To create a custom view, click Add View.

2. Complete the settings in the window, including the view name, window layout, binding between the cameras/sequence resources and the windows (by dragging the cameras/sequence resources to the windows or by clicking Batch Add), stream type (for cameras only) and preset (for PTZ cameras only). Click OK when you complete the settings.

3. Repeat the above steps to create all the custom views you need.

4. Click the Sequence Display button to sequence the custom views you have created.

Recording and Playback 

Record videosand search for playback or download.

Configure a Recording Schedule 

Configure a recording schedule for an NVR to record video automatically. This function is available to NVR-connected cameras only. The recorded videos are saved on the NVR, not on the PC.

Click Recording Schedule on the control panel and then follow the steps.

Configure a 24/7 Recording Schedule 

Use the template to configure a 24/7 recording schedule.

1. Select the camera for which you want to configure a recording schedule.

2. Make sure the Enable check box is selected.

3. Click the Select button and then select the All Day template. The green on the calendar means time periods during which video will be recorded.

4. Click Save.

Customize a Recording Schedule 

Customize based on the 24/7 recording schedule.

1. Click or drag on the green to erase, or click or drag on blank areas to draw. Clicking the Clear button in the top right corner will clear all time periods.

2. In addition to the method described in step 1, you may also enter start and end times manually. Up to 8 time periods are allowed for each day.

3. After you complete the settings for a day, you may select from the drop-down list and copy the settings to other days. For example, select All.

4. Click Save to complete the configuration for the selected camera.

5. To make the same recording schedule for other cameras, click Copy To. 

In addition to the All Day and Work Day templates, you may customize 8 templates to save different recording schedules.

Record Video Manually 

Save live video to your PC as local recordingby clicking the Start Local Recording () and Stop Local Recording () buttons on the window toolbar.The storage path and video format are configured in SystemConfiguration.

Playback 

Click Playback on the control panel to search and play recordings, including device recordings and local recordings.

Play Device Recordings 

Device recordings refer to videos stored on an NVR or an SD card that is mounted on a camera.When you search for device recordings, the time displayed is same with the system time of the device, not your PC. The GUI and operations may vary with the playback type you choose. We take Normal Recording Playback for example to describe the general procedure.

1) Select the source of recording (device recording).
2) Select the playback type.
3) Select the camera(s).
4) Select or set the search time. If the device is in another time zone, please use the local time of the device.
5) Click Search.
Note:

• In step 2, you may select a sub type to search for event recordings or VCA recordings.
• In step 3, up to 16 cameras are supported if multiple selections are allowed.
• In step 4: The calendar shows search results for the selected camera(s) (blue means normal recording, and red means alarm recording). This feature is only available to Normal Recording Playback and Smart Recording Playback modes.

Play Local Recording and Image 

Search and play videos and images saved on your PC.The time of local recordings is the time of your PC.

1) Select the source of recording (local recording).
2) Select the camera(s).
3) Select or set the search time.
4) Choose to search for recordings or pictures. The default is to search for recordings.
5) Click Search.

Note:
In step 3: The calendar shows search results for the selected camera(s), and blue indicates recording on that day.

Playback Control 

Double-click a file on the right-side list to start playback; or click on the timeline to start playback from the corresponding time.

Playback Toolbar 

Playback Window Toolbar 

The window toolbar appears when the mouse pointer rests on a playing window. Operations with the toolbar are for this window only.

Table 7-1 Playback Window Toolbar

The toolbar shows  when the camera is a fisheye camera. Click this button to open the fisheye control panel.
The toolbar shows  when the camera is a multi-sensor camera. Click this button to enable tracking mode.
You can choose a stream transmission protocol (see System Configuration) according to the network environment to improve image quality.

Right-click Menu 

A menu appears when you right-click a window during playback. Many functions on the menu are same to the toolbar buttons.

Playback by View 

In normal recording playback mode, playback by view can play recordings of cameras bound to the windows in the set window layout. On the View tab, select a custom view, select a date on the calendar, and then click Search.

This function is only available to device recording.

Smart Search 

The NVR records motion in different areas of the image when recording video. Smart search allows you to locate videos that include motion in the image.

This function is available only when the software works with certain NVR models and versions.

1. On the Device tab, select Smart Recording Playback from the drop-down list. Select a camera, and then select a date on the calendar.

2. Search results appear on the timeline. The green means videos with changed images, and the green part plays at the normal speed; other irrelevant parts play at high speed.

3. By default, smart search searches the entire screen. You may click the Draw Area button (1) and then drag or click to edit the search area (covered by red grid).

4. Click the Finish Drawing button (2), adjust search sensitivity as needed, and then click the Search button (3) to search again.

Recording Download 

Download Recordings 

Use the following methods to download recordings from a device to your PC. Download progress displays in real time on the bottom toolbar.

After a search, click the Download button () under the recording list (see Playback Toolbar) to download recordings. Recording download is not available to smart search.

Choose a download speed:

a. High speed: Consumes more network bandwidth and PC performance andmay affect other services. This option is recommended for scenarios where there is no need to guarantee the normal operation of other programs or services.

b. Normal speed: Consumes less network bandwidth and PC performance and has limited impact on other services. This option is recommended for scenarios that need to guarantee adequate performance resources and network bandwidth for other programs or services.

Use the Start Clipping and Stop Clipping buttons on the window toolbar (see Playback Window Toolbar).

Use the right-click menu.

Click the Recording Download button ( ) in the lower left corner of the GUI, search device recordings and then download recording files. You can also download the recordings by time.

Manage Download Tasks 

1. Click the Task Management button ( ) in the lower left corner of the GUI to manage download tasks.

2. On the Recording Download tab, view and manage download tasks. The operations for the tasks vary with download status. You can stop download tasks, delete tasks, resume tasks, play downloaded recordings, and open a folder to view the downloaded recordings.

Stopping a download task does not delete the video that’s already downloaded to your PC.
You may set the file format and path at System Configuration > Audio & Video > Recording.
A video player is needed to play the downloaded recordings.

Video Wall 

Play video on a physical video wall.

Video wall is divided into DX video wall and decoding card video wall, depending on the device used to create the video wall.

• DX video wall: Video wall created by using a decoding device.
• Decoding card video wall: Video wall created using a decoding card on an NVR.

Add a decoding device or an NVR as admin first under Device Management > Device.
The number of video walls supported, operations allowed, and functions/features available may vary with decoding device and version.

Add a Video Wall 

Click Video Wall on the control panel. For the first time use, click and then choose a video wall type.If a video wall already exists, click  right to the video wall name to add a video wall.

1. Enter the video wall name.

2. Select the decoding device you want to use to create the video wall. The software automatically sets the video wall size and binds decoding channels to the windows. Decoding channel names appear on the screen.

3. Edit the video wall size, resolution or the binding between the decoding channels and windows. Use the Unbind All () or Bind All () button as needed.

4. Click OK. 

Note: 

• Make sure the video wall size is consistent with the physical video wall.
• Set small pixel pitch LED if necessary. The special LED width is the width of the last column; the special LED height is the height of the last row. The unit is pixel.

5. To edit or delete a video wall, click next to the video wall name.

Video Wall Operations 

Play Video on Video Wall 

Before playing video on a video wall, you can place the mouse pointer on  after an online camera to preview live video.

1. Drag cameras to windows to start live video on the video wall.

Some video walls require you to open window(s) on the screen first. The functions available may vary depending on the actual video wall, for example, you may open a window manually by dragging on the screen, automatically by choosing an existing layout, or by setting coordinates and window size.

Tip: To start live video from multiple cameras or group(s), select the cameras or group(s), click a window and then click Play on Screen or Play on Wall.

• Play on Screen: Play on one window.
• Play on Wall: Play on multiple windows.

2. To play a signal source (such as from a PC), click the Signal Source tab, and then drag the signal source to the intended window.

3. To choose a window to play alarm-triggered live video, right-click the window and click Set Alarming Window. Make sure alarm-triggered live video is configured (see Configure Alarm-Triggered Action for details). To cancel the setting, right-click the window and click Cancel Alarming Window.

Only one window can be set as the alarming window.
If the video wall is created using an NVR’s decoding card, alarm-triggered live video is only available to a camera under the NVR.

Output Audio 

Use the audio output channel of a DX device tooutput audio of a camera playing in a window or a screen. Only DX video wall created with certain DX device models supports this feature.

1. Click (1), and then select the audio channel.

2. Click a window/screen, and then click (2); or right-click and then select Turn Audio On. An icon appears in the top right corner, means the audio channel is outputting audio of the IPC in the window/screen.

3. Adjust output volume or mute the sound as needed.

Play Sequence Resource 

Play sequence resources on video wall. Three sequence modes are available: sequence video on a single window, sequence video on multiple windows, and sequence scenes.

Sequence on Single Window 

On the Sequence Resource tab,drag a sequence resource to a window.

Sequence on Multiple Windows 

On the Sequence Resource tab,select the sequence resource, click Play on Screen, and then select the windows.

Sequence Scenes 

Scene refers to video wall settings including screen layout, window, and video service (live view or sequence).The scene allows you to recall the video wall settings with one click of a button.Sequence scenes is to display different scenes according to set time.

1. Click the right-side , or click on the Scene tab to create scenes.

2. On the Scene Sequence tab, click  to create scene sequence plan.

3. Select the scenes and import them to the plan.

4. Set the sequence mode. You may choose to sequence by time interval or configure a 24-hour sequence plan.

• Sequence by interval: Display scenes one by one at set intervals, for example, 30 seconds in the figure above.
• 24-hour plan: Enable the plan, and then set the starting time. The scene will automatically display on the video wall at the set time. You may add scenes repeatedly as needed.

5. The scene sequence plan appears on the Scene Plan tab. Click Start to start scene sequence.

Other Video Wall Operations 

For more video wall operations, see the tables below.

The buttons on the toolbar are effective to all windows on the video wall.

Window control area. Buttons in this area are effective to a selected window. The actual buttons available may vary depending on the video wall type and device model.

Screen Control 

On the Screen Control tab, you can turn on/off screens including small pixel pitch LED screens.

Before you operate on the client, make sure the screen, the power distribution box (for LED screen), and the server are properly connected.

Configure Serial Port and Protocol 

Configure the serial port and protocol in accordance with the decoding device model and screen type.

Turn On or Off the Screen Automatically at a Set Time 

1. Select Turn On At or Turn Off At, and then set the time(s) when the screen automatically turns on or off.

2. Click Save. The screen will turn on or off automatically at the set time.

Turn On or Off the Screen Manually 

1. Click Turn On Screen. The screen turns on immediately.

2. Click Turn Off Screen. The screen turns off immediately.

Turn Off the Screen with Delay 

1. Select the check box for Turn Off In and then enter the time in the text box.

2. Click Turn Off Screen.

3. A message as shown below appears. The screen turns off automatically when the timer expires.

Behavior Search 

Search VCA images and recordings from an NVR.

This feature is available on certain NVR devices/versions. Currently this feature only supports Cross Line Detection and Intrusion Detection.

1. Follow the steps as illustrated on the image.

2. Perform the following operations as needed.

• Play or download the alarm video (5). The alarm video is 10 seconds long (5s before and 5s after the alarm time).
• View or save the alarm image (6). You can click the left or right arrow to view the previous or next image.
• Click (7) to switch to list mode.
• Click (8) to export search results.

Face Recognition 

View live video, alarm records and pass-through records; manage device face libraries and monitoring tasks.Use face recognition to search people and count people coming in and out.

Realtime Monitoring 

View live video and snapshots of people passing through, view realtime alarm records.

Double-click a camera to start live video.Up to four cameras are allowed.

Perform the following operations as needed:

Click a snapshot to view details. Click More to go to the Pass-Thru Records tab. If a face is identified as a stranger, you can add it to a face library: put your mouse pointer on the snapshot, click , enter the required information, and choose the target library.

View realtime alarms. Click More to go to the Alarm Records tab.

a. Choose a record type:

Comparison Record: Click an icon to filter alarm recordsby comparison result(for match, for not match).

Mask&Temperature Records: View records of people not wearing a mask and people with an abnormal temperature.

b. Click a record to view the corresponding face comparison information. Personal information is displayed only when the degree of match between the captured face and the face in the library reaches the set alarm threshold. See Monitoring Task for details.

View people counting statistics. The statistics are displayed only when Mask&Temperature Record is chosen.

To view the statistics of people not wearing a mask and people with an abnormal temperature, you need to enable Mask Detection and Abnormal Temperature Detection first. See System Configuration for details. The statistics are automatically cleared at 0:00 every day. You can also click Clear Statistics to reset the statistics manually.

Configure epidemic control parameters. Click under the live view window to configure epidemic control parameters. See System Configuration for details.

Configure attributes to be displayed for match faces and not match faces. Click under the live view window to configure attributes. See System Configuration for details.

NOTE: A device reports alarms only when a corresponding monitoring task has been configured.

Face Library Management 

Manage faces in different libraries to meet different monitoring needs. The libraries are saved on the device.

Create Face Library 

Select the device you want to manage, then the face libraries of the device appear in the list. Click  to create a new face library. You can edit the library name or delete a library you don’t need anymore.

Add Face Data 

Choose one of the following ways to add face data to face libraries.

Option 1: Use Batch Add 

1. Click Batch Add, then select the target face library. You may select multiple libraries of different devices.

2. Click Add, then select face images you want to add. The images must be JPG files and the size of each photo is between 10KB and 500KB.

3. Click the edit button, enter the required information.

4. Click Next to save and continue to the next, or click Finish.

5. Click OK when you complete the information for all.

Option 2: Import a file containing face data 

Importa file that contains the necessary face data. The file and its content must conform to the format, and the size of each photo is between 10KB and 500KB.

1. Click Download Template and then enter the face data into the template file.

2. Click Import and select the file you have edited. The imported data appear in the list. You can click the button in the list’s upper right corner to switch display mode.

3. Edit or delete face data as you need; click Export to save the face data in the current library to a CSV file.

Monitoring Task 

Create monitoring tasks using the created face libraries. The device compares the captured faces with the faces in the libraries and reports alarms as configured.

1. Select a camera on the left, and click Add to create a monitoring task.

2. Set the task name, monitoring type, and choose a face library to be used for monitoring. Set the alarm threshold based on your needs.

• Match Alarm: If the similarity (or Match in Realtime Monitoring) between a captured face and a face in the library reaches the alarm threshold, the device reports a Match alarm.
• Not Match Alarm: If the similarity between a captured face and a face in the library fails to reach the alarm threshold, the device reports a Not Match alarm.
• All: To monitor all the faces that the device captures.

Personal information such as name and ID number will not be displayed in the realtime monitoring window for a Not Match alarm.

3. Click OK. The task is created and appears in the list. For an NVR channel, you may copy the monitoring task to other channels of the same NVR.

Alarm Records 

View alarm recordsgenerated by theconfigured monitoring tasks.

Choose a video channel, set search conditions including monitoring type and alarm time, and then click Search. If you chose Match Alarm as the monitoring type, you can click More to set more conditions including name, ID number, degree of match, mask wearing status, and body temperature range.

NOTE: Only NVR channels supporting face detection or face recognition can be selected.

Perform the following operations as needed:

Add the face snapshot of a stranger to a face library

Put your mouse pointer on the face snapshot and then click  . You need to enter the required information including name and ID number and specify the target library.

View details 

Click a record to view alarm details.

Export records 

Click Export to export all the search results.

Pass-Thru Records 

View pass-through records, people counting statistics, mask wearing status, body temperatures.

Choose a video channel, set search conditions including alarm time, mask wearing status and temperature range, and click Search.

NOTE: Only NVR channels supporting face detection or face recognition can be selected.

Perform the following operations as needed:

Add a stranger’s face snapshot to a face library

Put your mouse pointer on the face snapshot and click  . You need to enter the required information including name and ID number and specify the target library.

View details 

Click a record to view alarm details.

Export records 

Click Export to export all the search results.

People Counting 

Count people entered and/or left during a certain period.
NOTE: This function requires that the camera be capable of people counting and connected to the PC via

Click People Counting on the control panel.The People Counting page is displayed with two tabs:

• Realtime Statistics: Display counting results of selected cameras in real time, including seven latest counting results.
• Report Statistics: Display counting results in a bar chart or a line chart and export.

Realtime Statistics 

On the Realtime Statistics tab, select the check box for the camera to enable realtime statistics.You may double-click a camera to start live video from it.

Enable realtime statistics to view real-time counting results from selected cameras.

Statistics include:

Realtime counting results (left side): It is the total number if multiple cameras are selected. The three colors indicate different counting types, and they match the lines on the coordinates on the right side.

7 latest counting results (right side): axis X means time, and axis Y means number of people (the minimum is 0; the maximum is 10 by default and it updates according to the actual counting result).

When realtime statistics is enabled, the first time of counting is displayed in the lower left corner of axis X (1), and the counting result appears on axis Y(e.g., 993). The result updates periodically, and the latest result is displayed on the right(2).

NOTE:

Live view and realtime statistics stop automatically when you close the People Counting page or log out of the system.

Report Statistics 

On the Report Statistics tab, select camera(s)and then click on to count directly; or set conditions first:

Counting type: By minute, hour, day or month.

Set a time period by selecting on the calendar or typing in the field.

Count people entered and/or left by selecting the check box(es) .

Display results in a line chart or a bar chart by clicking .

NOTE: The maximum time period you can set is 60 time units, depending on the counting type (minute, hour, day or month) you choose. For example, the maximum period is 60 months if you choose to count by month, and 60 days if you choose to count by day.

Click Count, andresults appear.

Place the cursor on the line/column to view the number at a time point.

Click a column title, for example, People Entered or People Left to sort the results in ascending or descending order.

Click  to display in a bar chart.

Click Export to export statistics as a CSV file to your PC. You can use Microsoft Office Excel to open the file.

Access Control 

Manage access control libraries, perform realtime monitoring, search and export entry/exit records.

Library Management 

Add a Library 

Add a library for an access control deviceand use the library to control access.

1. Choose the target access control device in the drop-down list on the left.

2. Click behind the device name. A new library appears under the device.

3. Click  behind the new library, and enter the device name.

4. Click OK.

Add Personal Data 

Add personal data to the library. You can add data for one person at a time, for multiple person using the Batch Add feature, or for multiple persons at a time by importing a file containing personal data of these persons.

Option 1: Add data for one person

1. Click Add > Add One Person.

2. Enter the required information. Click the image on the left to upload a photo.

3. Click Next Step, and choose the target library.

4. Click OK. 

Option 2: Use batch add

1. Click Add > Batch Add, and choose the target library.

2. Click OK. 

3. Click Add, and select face image(s) you want to add.

4. Click  , and enter required information including name and ID.

5. Click Next to save and continue to the next, or click Finish.

6. Click OK when you complete the information for all.

Option 3: Add data for multiple persons at a time by importing a file containing personal data of these persons 

1. Click Generate Template, and use the template to create a file containing the required personal data.

2. Click Import, and select the target library.

3. Click , and select the file to import (CSV or XLSX).

4. Click Import.

NOTE:

Only JPG images are allowed. The size of each image must be within the range of 10KB and 500KB.
XLSX files cannot be imported or exported on Mac OS.

The following operations are allowed:

• • Click  in the list’s upper right corner to switch display mode.
• • Click Export to save data in the library to a CSV or an XLSX file.

Realtime Monitoring 

View live video and snapshots of people passing through,take snapshots, use digital zoom, and open the door remotely.

Double-click a camera or drag it to the window to start live video. Pass-through records are displayed on the right side.

The captured face snapshots and the corresponding library photos (if a match is found) are displayed on the right side. You can click a record to view details,including the original snapshot, mask wearing status and body temperature.

If a face snapshot does not have a match in the library, then no library photo is displayed, and the person will be identified as a strange. You can add the stranger to a library by placing your mouse pointer on the face snapshot and clicking . You need to enter a name and ID for the person and specify the target library.

NOTE:

• Mask detection and temperature detection are available only when they are supported by the device and have been configured on the device. See the user manual of the access control device for details.
• If the access control device can upload original snapshots, the Show Original Snapshot button will be displayed, and you can click it to view the original snapshot.
• Up to 10 pass-through records can be displayed. The oldest record will be replaced by the new one when more than ten pass-through records are generated.
• Pass-through records are displayed in real time. Restarting the software will clear the pass-through records in realtime monitoring.
• You are recommended to configure at least one library before you view pass-through records.

The following operations are allowed:

• • Live view window toolbar

The window toolbar appears when the mouse pointer rests on a live view window. The toolbar is effective only to the current window.See Live View Window Toolbarfor details. The on the toolbar is used to open doors.

• • Live view toolbar

See Live View Toolbarfor details.

• • System configuration

Click  in the upper right corner to configure alarm sound, pop-up alarm window, etc. See System Configuration for details.

Entry/Exit Records 

Search entry and exit records by time, mask wearing status, body temperature range, authentication result, etc. You can further filter search results by name and IC card number after setting Authentication Result to Succeeded.

The following operations are allowed:

• • Add a stranger to a library quickly

The library photo is empty when a stranger is detected. To add the stranger to a library,click  in the Operation column, enter the required information including name and person ID, click Next Step, and then select the target library.

• • View details

Click  in the Operation column to view detailed personal information.

• • Export search results

Click Export to save search resultsto a CSV or an XLSX file.You can choose to export only text or both text and images.

E-map 

First complete configuration on the Edit Map tab,and then use the map on the Map tab.

• Hot spot: Video channels, alarm input/output channels, and devices added to the map. Live view and playback are only available for video channels.
• Hot zone: A map on a map. You may add hot spots on a hot zone.

Map Configuration 

Add a Map 

Click E-map on the control panel, and then click . PNG, BMP and JPEG images are allowed.The added map appears on the page and on the Map Resources list on the left.

On the Edit Map tab, you can:

• Change the map scale: Use the scroll wheel or click the zoom buttons (1) to zoom in or out.
• Eagle eye: Drag on the yellow area (2) to view details on the map (or drag map directly).
• Add hot spots (3): Drag devices, video channels, alarm input/output channels to intended positions on the map. See Add a Hot Spot for details.
• Add hot zones (4): Add a map on the map. Up to 7 layers of maps are allowed. See Add a Hot Zone for details.
• Manage pictures (5): Add or delete maps. Deleting a map will also delete all hot spots and hot zones on it.
• Edit map resources (6): Edit map name, and change the icon color of hot zones.
• Filter map resources (7): Choose to display video channels, alarm input/output channels or devices on the map.

Add a Hot Spot 

Add hot spots so you can quickly locate them on the map when any event occurs. Hot spots include video channels,alarm input/output channels and devices. Right-click a hot spot to change color or delete it from the map.

When adding a device hot spot, you can also add video channels and alarm input/output channels under it. The channels and the device will appear together on a hot zone on the map. You need to choose a map for the hot zone. Follow the steps as shown below:

Add a Hot Zone 

Follow the steps to add a hot zone.

The hot zone is displayed as an icon on the map and opens when you double-click it.Right-click a hot zone to change color or delete it from the map.

Map Operations 

After you complete the configuration, click the Map tab to use the map. You may view hot spots, hot zones, alarms, and trigger/clear alarms.

Locate a Hot Spot or Hot Zone on the Map 

Click the Locate button to locate a hot spot or hot zone on the map.

Hot Spot Operations 

Click the Select button on the top toolbar and then drag on the map to select hot spots. Different hot spot types allow different operations:

• Video channel: Select video channels to view live or recorded videos. You may use the window toolbar during live view.
• Alarm input: Select channels to clear alarms.
• Alarm output: Trigger/clear alarms. You can use the buttons in the Operation column or the buttons on the top to trigger or clear alarms.

You can also right-click a hot spot to perform the above operations. For alarm input channels and video channels, you can also view alarm information.

Handle Alarms 

When an alarm occurs, the corresponding hot spot flashes red on the map. If the hot spot is on a hot zone, the hot zone flashes red. Right-click the hot spot to play live or recorded video, view alarm info or clear the alarm.

View Hot Zone 

To view a hot zone, click the hot zone map on the Map Resources list on the left, or double-click the hot zone icon on the map.

Click the main map on the Map Resources list to return.

Audio 

Audio services include audio, two-way audio and broadcast. Two-way audio cannot work at the same time with audio or broadcast, which means, starting two-way audio will stop audio or broadcast, and vice versa.

Note: Broadcast is not available on Mac OS.

Audio 

When live video is playing, click  in the window toolbar to turn on audio from the camera. The audio is one-way from the camera to your PC and it stops when live video is closed.

Note:Turning on audio for another camera will turn off audio from the current camera.

Two-Way Audio 

Two-way audio is audio communication between a device (camera or NVR) and your PC. Both the device and the PC shall be connected to audio input and output devices.

Note: Two-way audio is available to one device at a time.

Two-Way Audio with a Camera 

Double-click the camera or drag it to the window on the right. When two-way audio is started, the audio channel symbol changes (1), the two-way audio symbol flashes in the window’s upper right corner (2), and a hint appears indicating two-way audio is in use (3).

During two-way audio, you can adjust sound volume (4)(6) or stop two-way audio (5).

You may also start two-way audio with a camera (camera only) by clicking  in a live view window.

Two-Way Audio with an NVR 

Onthe Two-way Audio tab, double-click the NVR or drag it to the window on the right.When two-way audio is started, the audio channel symbol changes (1), and a hint appears (2) indicating two-way audio is in use.

During two-way audio, you can adjust sound volume (3)(5) or stop two-way audio (4).

Broadcast 

Broadcast is one way from your PC to cameras.

1. Click the Broadcast tab. Select audio channels from the left-side list. You can:

• Select audio channels one by one.
• Select an NVR or an organization to select all audio channels under it.

2. Click Add. The selected audio channels appear on the broadcast list on the right.

3. After all the channels are added, click  to start broadcast.

After broadcastis started, you can:

• Add more audio channels: Select audio channels on the left-side list (1) and then click Add. Broadcast starts automatically for these channels.
• Adjust sound volume (2) or click  to turn off the microphone.
• Delete audio channels from the broadcast list: click (3) to delete one by one; or select the check box (4) and then click (5) to delete in batches.
• Stop broadcast: click or close the Audio page.

Currently, broadcast to an NVR is not available.

Alarm Configuration 

Configure action(s) to trigger when an alarm of a certain type occurs at a specified source; view alarm records and handle alarms.

Configure Alarm-Triggered Action 

Alarm configuration includes the configuration of alarm source, alarm type, device to link, and action to trigger.

1. Click Alarm Configuration on the control panel and then follow the steps.

2. Click a tab according to the alarm type you want to configure. Take Camera Alarm for example.

• Camera alarm: includes camera online/offline, event alarm and VCA alarm.
• Device alarm: includes device online/offline, disk online/offline, high/low temperature, etc. For DX devices, the following alarm types are available: fan failure, LED distribution box high temperature, LED distribution box smoke alarm, fan failure cleared, LED distribution box high temperature cleared, LED distribution box smoke alarm cleared, high/low temperature cleared.

3. Select an alarm source. The subsequent settings are all configured for this alarm source.

4. Select an alarm type. An alarm of the specified type will trigger the configured actions. If you choose face recognition match or not match alarm, make sure the monitoring task has been configured (See Monitoring Task).

5. Configure alarm parameters.

For the following alarm types,you need to click Configuration to access the device’s Web interface and complete configuration first:motion detection, tampering detection,alarm input,audio detection, intrusion detection, cross line detection,face detection, defocus detection, object left behind, object removed, human body detection.

Take motion detectionas an example, you need to make sure motion detection is enabled, detection area is specified, and arming schedule is configured.

6. Click the Trigger Actions tab.

7. To receive an email alert when an alarm occurs, select the check box and complete email configuration (see System Configuration).

8. Click Add. A dialog box appears. Select the device(s) to link and then click OK. The linked device(s) appear on the list. The device(s) will be triggered to perform the specified action(s) when an alarm of the specified type (step 2) occurs at the specified source (step 1).

9. Configure actions to trigger:

• Alarm-triggered live view: An alarm will trigger a pop-up window playing live video from the camera.
• Alarm-triggered preset: An alarm will trigger the PTZ camera to rotate to the preset. The presets in the list must be configured beforehand.
• Alarm-triggered output: An alarm will trigger the camera to output an alarm and trigger an action by a third-party device.
• Alarm-triggered video wall: An alarm will trigger the video wall to play live video from the camera. You need to complete video wall configuration first. Only one camera can be selected.

10. Click Save.

NOTE:

• In order for alarm-triggered live view to take effect, click  in the bottom left corner of the GUI and select Display Link Video.
• Triggering live video from multiple cameras may cause high CPU usage of your PC and may therefore affect other services.

View Alarm Records 

Click Alarm Records on the control panel to view alarm records, acknowledge alarms, and export alarm data to your PC.

Latest Alarm 

The Latest Alarm tab list alarms reported since your current login and refreshes automatically.

Tips:

You can:

• Sort records in ascending/descending order by clicking a header (e.g., Alarm Time).
• Acknowledge alarms: Select (or double-click) an alarm and click Acknowledge. Acknowledged alarms are moved to the History tab.
• Click  to turn on/off alarm sound.
• Click  to play an alarm video. The length of alarm video is configurable in system configuration (Operation > Alarm > Stop Playback After and Start Playback Before).
• Click the Latest Alarm button () in the lower left corner of your GUI. On the page displayed, you can turn on/off alarm sound, select/deselect Display Link Video to enable/disable alarm-triggered live video, or double-click a record to display the full Realtime Alarm tab.

• Click the Alarm-triggered View button () to view alarm-triggered live video.

Tips:

• The window toolbar is available (see Live View Window Toolbar).
• Lock Screen: When this option is selected, the current window layout (e.g., 4-window layout) is locked, and it does not change as new alarm-triggered live video occurs.
• Lock Current Live View: When this option is selected, the current live video will not be replaced by new alarm-triggered live video.
• Live video stops when the set play time is over (see Configure Alarm-Triggered Action). You can play the video again by double-clicking the alarm record in the top left area.
• Click the button in the lower left corner to open the alarm records page.

Alarm level and corresponding alarm types:

History Alarm 

All alarms,including latest alarms and history alarms, can be retrieved on the History tab.

Youcan:

• Set search conditions. Click Reset to reset search conditions.
• Click a header (e.g., Alarm Time) to sort records in ascending/descending order.
• Choose the number of records displayed per page.
• Double-click a record to view details. Alarm Time is your PC’s system time when the alarm occurs, and Device Time is the device’s system time when the alarm occurs. The times can be different. You will also find a time difference if your PC and the device belong to different time zones.

• Select an alarm and click Acknowledge to acknowledge it.
• Click Export to export search results to your PC as a CSV file. Use Microsoft Excel to open it.

Operation Logs 

Click Operation Log on the control panel to query logs and export search results to your PC.Log information includes username, operation details and result.

You can:

• Set search conditions. Click Reset to reset search conditions.
• Click a header (e.g., Log Time) to sort records in ascending/descending order.
• Choose the number of records displayed per page.
• Double-click a record to view details.
• Click Export to export search results to your PC as a CSV file.

User Management 

Click User Management on the control panel to add, edit or delete users.

Use the default username/password (admin/123456) to log in. “admin” is the super administrator and cannot be deleted.

1. To add a user, click Add:

• Administrator: Only admin can add administrator. Administrator has all permissions by default.
• Operator: Admin or administrator with user management permissions can add operators. An operator has no permission by default.

2. To assign permissions, specify permissions on the left. For some permissions (e.g., Live View), you need to select device(s) on the right.

3. To edit a user (username, password, permissions), double-click the user on the list; to delete user(s), select and click Delete.

Menus may be grayed out or hidden for lack of permission. Contact admin if necessary.

<p>The post How to set Guard Viewer For PC first appeared on NVR IPCAMERA SECURITY.</p>

The user may initiate a firmware update on a supported ONVIF device via the Management Client. A right click on a hardware entry in the Recording Servers tree will show a context menu containing the “Update firmware…” item. Upon clicking the item, the “Update firmware” wizard will appear.

Using the wizard, the user can select a firmware image to update the device with. A series of preparatory steps will take place, distributing the file around the VMS, after which the ONVIF driver will be invoked and the firmware upload to the device will begin. The steps are outlined below:

1. Call the StartFirmwareUpgrade command. From the response message, three values are expected:
   1. UploadUri – the URL to which the firmware image will be sent to
   2. UploadDelay – the amount of time to wait before beginning the HTTP POST request
   3. ExpectedDownTime – the duration for which the device expects to be unavailable for after the upload is complete
2. Wait for the duration specified in UploadDelay.
3. Upload the firmware image to the URL specified in UploadUri using an HTTP POST request.
4. The HTTP response code is examined. Unless it’s 200 OK, the driver will report a network error at this point and terminate the update process.
5. Wait for the duration of time specified in ExpectedDownTime, while attempting reconnection to the device every 30 seconds. The reconnection sequence is as follows:
   1. Call the GetServices command. If it succeeds, move to the next step.
   2. Call the GetDeviceInformation command. If it succeeds, report success. If the reported firmware version is unchanged from the one reported when the update procedure began, report a warning instead.
   3. In case of failure in any of the steps, attempt reconnection again in 30 seconds.
6. Perform a final reconnection attempt. If it fails, report a failure, otherwise, report success or warning according to the same rules as specified in 5b.

Milestone Device List

• IP Cameras
•  PTZ
•  Thermal
•  NVR
•  XVR & DVR

 

Models ▼	Image ▼	BNC Inputs ▼	Maximum HDCVI Resolution ▼	Firmware ▼	Individual HDD Capacity ▼	HDD Drives ▼
X51B1E			8		6TB	1
X51A1E		4	5MP		10TB	1
X51A2E		8	5MP		10TB	1
X54A5L		32	5MP		10TB	4
X58A5S		32	5MP		10TB	8
X72A3A		16	8MP		10TB	2
X74A3L		16	8MP		10TB	4
X51A3E		16	5MP		10TB	1
X52A3A		16	5MP		10TB	2
X52A3N		16	5MP		10TB	2
X72A2A		8	8MP		10TB	2

Models ▼	Image ▼	Series ▼	Resolution ▼	Body ▼	Firmware ▼
DH-IPC-PDBW5831N-B360		Multi	2 MP x 4	Panoramic
DH-IPC-PDBW5831N-B360		Multi	2 MP x 4	Panoramic
N22AL12		Lite	2MP	Dome
N45CB5Z		Pro	4MP	Bullet
N25CL5Z		Pro	2MP	Dome
N45CL5Z		Pro	4MP	Dome
N44CL53		Pro	4 MP	Dome
N44CG53		Pro	4 MP	Eyeball
N44CL52		Pro	4 MP	Dome
N25CL5Z		Pro	2MP	Dome
N24CL52		Pro	2 MP	Pro
N45BA5		Pro	4MP	Box
N44BN52		Pro	4 MP	Wedge
N85CM5Z		Pro	8MP	Eyeball
N85CL5Z		Pro	8MP	Dome
N85CB5Z		Pro	8MP	Bullet
N84CG54		Pro	8 MP	Eyeball
N84CL52		Pro	8 MP	Dome
N84CG52		Pro	8 MP	Eyeball
N45CL5Z-B		Pro	4MP	Dome
N44CB33		Pro	4 MP	Bullet
N44CG52		Pro	4 MP	Eyeball
N44CG52-B		Pro	4 MP	Eyeball
N24BN52		Pro	2 MP	Wedge
N24CG52		Pro	2MP	Eyeball
N24CB33		Pro	2 MP	Bullet
N84CL54		Pro	8 MP	Dome
N84CB34		Pro	8 MP	Bullet
DH-IPC-HFW4239TN-ASE		Pro	2 MP	Body
DH-IPC-HDBW4239RN-ASE		Pro	2 MP	Dome
EBW81242N		Ultra	12MP	Fisheye
DH-IPC-HDBW7442H-ZFR		Ultra	4MP	Dome

Models ▼	Image ▼	Resolution ▼	Optical Zoom ▼	Firmware ▼
22204UENI		2MP	4x
8A840WANF		2MP	25x
6CE445XANR		2MP	30x
12203TNI		2MP	3x
1A203TNI		2MP	3x
49225TNI		2MP	25x
50430UNI		4MP	30x
52C430UNI		4MP	30x
59430UNI		4MP	30x
6C430UNI		4MP	30x
6AE530UNI		5MP	30x
6AL245UNI		2MP	45x
59230UNI		2MP	30x
6CE230UNI		2MP	30x

Image ▼	Models ▼	Resolution ▼	Main Firmware ▼
	TPC-BF2221N-B3	2MP
	DH-TPC-BF5401N-B	2MP
	DH-TPC-BF5601N-B	2MP

Models ▼	Image ▼	Channels ▼	Firmware ▼	Individual HDD Capacity▼	HDD Drives ▼
N42B1P		4		8TB	2
N42B2P		8		8TB	2
N42B3P		16		8TB	2
N52A4P		24		10TB	2
N54A4P		24		10TB	4
N52B2P		8		10TB	2
N52B3P		16		10TB	2
N54B3P		16		10TB	4
DHI-NVR6A08-128-4KS2		128		8TB	8
DHI-NVR6A08-32-4KS2		32		8TB	8
DHI-NVR6A08-64-4KS2		64		8TB	8
DHI-NVR4216-16P-I		16		8TB	2