How to Add an H-series Camera to a Uniview NVR Internal Switch

In this guide, we will show how to add an H-series IP camera to a Uniview NVR.

Step 1. Configuring The H-series Camera

The best way to do this is to connect the camera directly into your computer or router and power the camera separately using a 12vDC power supply, or use a PoE switch like we used in this guide.

Once the camera is connected,run the SADP Tool and modify the camera’s IP address to match the internal subnet of the Uniview NVR (172.16.0.x)

In this guide, we are making the H-series camera’s IP address “172.16.0.2” and setting the Gateway to “172.16.0.1”.

Please Note!

Do not set the camera’s IP the same as the NVR’s internal IP, which is “172.16.0.1”

Using Your Uniview NVR

Read More :

1. UNIARCH NVR DVR Full installation user manual
2. Advanced Uniview IP Camera Guide
3. How to Setup Your Uniview Security System

Step 2. Plug the H-series Camera Into the Uniview NVR and Configure

In this guide, we will be connecting the H-series camera into channel 1 on the Uniview NVR.

We are accessing the Uniview NVR via it’s web interface on Internet Explorer.

From the Live View page, Click on Setup -> Camera -> Camera
Then click on the needed channel and Modify
Change Add Mode from “Plug-and-Play” to “IP Address”
Protocol from Uniview to ONVIF
Type in the needed IP Address.
Port is 80
Then the login info for the camera.
Click Save

After Refreshing, the channel status will turn Green

Now it’s live! Click on the Live View Tab to see the camera

Modify OSD Settings Via Web Interface

By Default, a camera’s name when added to a Uniview NVR is it’s model number.
Having the ability to change the camera name can keep your system organized and easier to navigate.

Step 1. Log Into the NVR Via Web Interface

Log into your NVR via Internet Explorer and click on the Setup Tab at the top. Then go into the Camera on the left and lastly OSD.

You will have to adjust and name each camera one at a time. Select the camera you want to work on from the drop-down list at the top.

Step 2. Modify OSD Settings For The Camera

In the Basic Tab, you can modify the camera name, Name & Time Visibility, date & time Format, and Font Size & Color.

In the Content Tab, you can add additional wordage on the camera’s Live View

Setting up Uniview DDNS with EZDDNS

List of needed materials:

1. Computer
2. Uniview Recorder

Below you can see the web interface for a Uniview NVR. You will need to navigate to the IP address of the unit. Then go to Setup>Network>DDNS.

If you are having trouble finding your Uniview recorder then you can download the EZ Tools software to find it on your network here

Once you are in the DDNS portion of the recorder. Just turn it on and fill in the required information as shown below. Select EZDDNS you will have to create your own unique domain name.

Then click save then under device address you will see where it says en.ezcloud.uniview.com/yourdomainname. You will then use this address to access your recorder from the internet through your favorite web browser.

If you are setting it up from the attached monitor you can navigate to it the same way as shown below and just fill in all the information the same way.

No Video Output

The main reason a monitor would not work on a recorder is the output resolution of the recorder is too high or too low for the monitor to display. Example: The recorder could be set to 1920 x 1080 (1080P) but the monitor may only support 1024 x 720 (720P).

In this case the recorder display resolution will need to be lowered. This can be done a couple different
ways.

Method 1.

Log into the recorder via the network using an Internet Explorer browser. Navigate to the setup and then to the display settings. Adjust  the resolution for the output that you are using (VGA or HDMI)

After Clicking Save, the Recorder will reboot and will output the new resolution!

Method 2.

Attach a mouse to the recorder in any of the USB ports. Press and hold down mouse 3 (Scroll
wheel) for 20 seconds then let go. The resolution of the recorder will reset to 1280 x 1024 and should
work on most monitors.

Method 3.

Double check the HDMI cables and VGA cables and make sure everything is connected on both
sides and that the monitor is on the correct source channel. Try a different monitor if this does not
work.

Password Reset

The Default Uniview admin Password is “123456”. However, this can be changed upon setup or even accidentally!

If the default password doesn’t work then you will have a few methods of troubleshooting this issue in
order to get back into your system. Your first step should be to contact your installer. Most installers
have a standard password that they assign to units they install and may be able to help resolve this for
you simply. If they do not have it then you can move on to other solutions.

Method 1. Via EZView App

1. Open the EZView application
2. Click the three lines in the top-left of the screen, this will bring out a pop-out menu. Select Local Config which should be the second option from the bottom.
    
3. In the configuration screen, select the Forget Device Password which is also the second option from the bottom.
   
4. This will open the camera of your phone if you have allowed the application to do so.
5. On the unit, go to the login screen. In the bottom-right corner is the Forgot password button. Click this.
   
6. Or From the Web Interface, select Forgot Password on the login Page
   
7. Now using your phone scan the QR code that has been generated on the screen. This will produce a temporary password for you to use on the unit. it will be emailed to the account you set upon initial setup.
   
8. The Web Interface will produce the same QR Code
   
9. Type in the temporary password that the is sent via email and type it into the field. After clicking okay, you will be prompted to change the password.
   
10. The Web Interface will prompt to change the password as well before signing in
    

Method 2. Via EZCloud Service

The EZCloud service is Uniview’s P2P service which allows users to remotely view their units no matter
where you are (assuming you have a connection to the internet!). There are a few ways to add your unit
to the cloud service which is covered in other tutorials available on our website. This tutorial will assume
you have already added the device to your cloud account.

1. Go to en.ezcloud.uniview.com
2. Log into your cloud account using your credentials.
3. Your devices should be listed on the screen under My Cloud Devices
   
4. Click the Retrieve password option on the same line as your recorder.
   
5. You will land on a screen which requires a verification code. To have the code sent to the e-mail associated with your account click the acquire button next to your e-mail.
   
6. Open your e-mail. Within a minute or two the verification code will arrive. Retrieve the verification code and type it into the EZCloud window where the verification code is requested. Note: The verification code is only valid for 30 minutes after clicking the acquire button.
7. After putting in the verification code, the website will generate a temporary password just for today’s date. Type this on your unit and log in.
   

Accessing Cameras On PoE

Accessing Cameras On The Built-In PoE

Sometimes it is necessary to access a camera directly in a computer web browser in order to modify a setting, update firmware, or troubleshoot a problem. With most manufacturers, when using a built in PoE switch this can become a very big hassle and waste a lot of time. It would normally involve hooking a PC directly into the PoE switch and networking the computer by hand to match the built in PoE gateway. With Uniview all that hassle and trouble are in the past. Uniview NVRs allow for direct access to the camera from within the NVR, by using the NVR as a host to access the camera’s web page with the click of a button.

Accessing the Cameras

1. Open the recorder’s webpage in Internet Explorer by navigating to the local IP address of the recorder.
2. Login to the recorder, the default login is Username: admin and Password: 123456
3. After logging into the recorder, close the change password popup if it appears and then navigate to the setup/setting menu
4. Once in the settings, navigate to the Camera menu on the left hand side of the screen.
5. Then navigate to the IP Camera sub menu inside the Camera menu
6. A list of all the camera that are connected to the recorder will be displayed
7. Locate the camera that you need access to in the list and look all the way to the right hand side of its listing
8. Click on the Access button that is listed for that camera.

Next the camera will open in a new tab. This will work for cameras that are on the local network or cameras that are on a built in PoE.

Once the camera login loads, login to the camera with the default login of Username: admin and Password: admin

At this point after logging in the camera should be fully accessible and any changes, firmware updates, information, or troubleshooting that needs to be configured can be. Since you are logging into the camera directly, even though  it is through the recorder, the computer has a direct network link to the camera allowing for greater access to settings than  just on the recorder. This also allows for more stable and reliable firmware updates, with a better success rate. When updating the firmware of the camera this way, the computer is uploading the firmware file to the camera directly without using the NVR as a middle point.

Web Browser Access using a PC

Follow the steps below to access your Uniview device in a web browser.

Note: Cameras connected to the built in POE ports on an NVR will not show on this tool.

1. Connect the device to your router.

2. Download, install, and run the EZTools software.

EZTools will find Uniview and ONVIF devices currently connected to your network

3. Locate the device on the list.

Note: You can filter which devices are shown by checking/unchecking the All, IPC, NVR, and Other boxes above the device list.

4. Click the “e” icon on the right side of EZTools to automatically open the device in your default browser.

Note: If your default browser isn’t loading a Live View use Microsoft Edge with IE Mode enabled to access the NVR.

Watch it in action

How To Monitor And Manage Your Storage

To monitor and manage your storage, you will need to access the Hard Disk group on the setup. The settings and their functions are explained below.

Hard Disk

This tab shows you details of the current storage situation of your NVR. The total capacity and the available free space can be monitored from this tab alongside options to add and more storage.

Navigation: Setup > Hard Disk > Hard Disk

• Refresh: Activating this option refreshes the list.
• Add: Allows for the addition of a connected hard disk.
• Format: Erases the data of a hard disk by formatting partitions.
• Configure: Allows you to determine the read/write properties of each drive.

Disk Group

This tab allows the creation and management of Disk Groups. A handy tool if managing a large number of Hard Disks and to simplify storage allocation.

Navigation: Setup > Hard Disk > Disk Group

• Disk Group: Allows the creation of disk groups.

The disk group feature allows us to assign hard disks to a disk group and use the disk group to store recordings and snapshots of specified cameras. Different arrays can be assigned to different disk groups. Redundant disks cannot be assigned to any disk group. Disk group information will be initialized if any disk in the group is formatted.

Allocate Space

This tab allows setting a maximum storage allocation for each camera on a disk group.

Navigation: Setup > Hard Disk > Allocate Space

• Select Camera: Select which camera to configure.
• Disk Group: Specifies which disk group to configure the camera for.
• Max Recording Space: Determines the allocated storage size in GB for video recordings.
• Max Image Space: Determines the allocated storage size in GB for image snapshots.
• Copy: Allows copying of configuration to selected cameras.

Advanced

This tab will determine what the Network Video Recorder will do once the Hard Disk Drives are full and new footage needs to be saved. Setting this to Overwrite should allow the NVR to delete older footage to make space for new ones to be saved while setting this to Stop will prevent any new recordings to be saved.

Navigation: Setup > Hard Disk > Advanced

• HDD Full: Determines whether to overwrite old recordings or stop once the HDD is full.

How To Adjust Resolution, Frame Rate, Bit Rate, and Video Compression

Adjusting the resolution, frame rate, bit rate, and compression of recorded footage can be done by navigating to the Encoding Tab.

Navigation: Setup > Camera > Encoding

• • Navigate to the Encoding tab.
  • Select which Camera to configure.
  • Storage Mode: Select which stream to use for storing footage. By default, the mainstream is used for storage.
  • Capture Mode: The options here are the presets you can use if preferred.
  • Main/Sub/Third Stream: These sections allow greater configuration of each stream.
    • Stream Type: Select your preferred stream type.
      • Normal: main stream that is intended for scheduled recording.
      • Event: main stream that is intended for recording triggered by events such as alarm inputs or motion detection alarms.
    • Video Compression: Select your preferred video compression standard. The listed options depend on the standards supported by the camera:
      • H.264
      • H.264+
      • H.265
      • H.265+
    • Resolution: Select your preferred resolution for the selected stream.
    • Bit Rate Type: Select your preferred bit rate type.
      • CBR: Constant Bit Rate is used to maintain a specific bit rate by varying the quality of video streams. It is preferred when limited bandwidth is available. The disadvantage is that video quality will vary and may decrease significantly with increased motion in the scene.
      • VBR: When using Variable Bit Rate, video quality is kept as constant as possible, at the cost of a varying bit rate, and regardless of whether or not there is motion in the image. It is ideal when high quality is a requirement, especially when there is motion in the picture.
    • Image Quality: This parameter is effective only when Bitrate Type is
      set to VBR. 9 levels are provided.
    • Bit Rate (Kbps): Select your preferred number of bits transferred per second. Select a value or select Custom and then set a value as needed.
    • Range: Select the bit rate range. Currently the range is fixed.
    • Frame Rate (fps): Select the number of frames per second.
    • I Frame Interval: Number of frames between two adjacent I frames.
    • I Frame Range: Range of I frames. Currently the range is fixed.
    • Smoothing: Use the slider to control the sudden increase of bit
      rate.
    • Audio Stream: Enable or disable audio stream.
    • Smart Encoding: The advanced mode achieves higher compression ratios.

How to Enable 2-Way Audio Via Web Interface

In this guide we will show how to enable two-way audio on a UNV camera, NVRs or NVRs via a computer/laptop. By doing that, you should be able to hear and speak back to the camera.

Please Note

To utilize the two-way audio feature, the camera must be equipped with a microphone and a speaker, they can be built-in, or installed separately if the camera allows it.

Enable two-way audio on Uniview cameras (or DVR/NVR)

Start by accessing the Uniview device via a web browser (use Internet Explorer and the computer has to be Windows). Type the IP address of the camera (or DVR/NVR) and the URL bar.

Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser.

You may install the plugin by selecting “Run”. In some instances, you may need to close the web browser to complete the installation. After installation completes, please re-open Internet Explorer. An example is shown on the screenshot below and the Uniview plug-in is called “UwareWebPlayer”.

Enable 2-Way Audio on UNV

After logging in, the Live View page will be where you will be able to use audio(2-way talk) features. If a camera supports 2-way audio, you will see that option (noted with the red circle).

Enable 2-Way Audio on UNV

Another option is using the RCA input and output directly on the back of the recorder to produce 2-way talk audio. This will be on the bottom of the Live View page. Sometimes the options are greyed out and that indicates that the audio is not supported by the camera.

Enable 2-Way Audio on UNV

Basically, if your camera supports audio, all you need to do is locate the audio buttons on the Uniview’s web interface and have them enabled. Make sure to unmute the PC’s audio as well, otherwise you won’t be able to hear anything.

Two-way audio enables the user to hear the live audio from the camera and, if necessary, to talk back. So the camera needs to have a microphone built-in and a speaker. If it has just a mic, then you can hear but you can’t talk back.

If you’re not sure if your camera is equipped with audio capabilities, just check the spec sheet or ask the Nelly’s for more information.

If the audio is not clear enough, or too noisy, it’s recommended not to install the camera close to noisy devices such as fans, AC units, or other appliances. Additionally you may need to update the camera’s firmware to the latest version.

Configuring Dual NIC NVRs

There are a lot of advantages to utilizing two network cards on a recorder.

The main advantage to using both NIC ports on a recorder is that cameras on the job can be on their own network away from the customer’s existing network, while still keeping the recorder on the main network to gain internet access for remote viewing.

Other reasons to use both NIC cards include load balancing to reduce camera video lag, and Net-Fault Tolerance which means the recorder will only take one IP address from the main network, and set up so if one port fails the other will take over.

Please Note

One thing to remember before setting up both NIC ports is that they CANNOT be on the same gateway/subnet. This will cause both ports not to work and the recorder will not give any warning when setting them on the same gateway/subnet.
Also remember that a monitor plugged directly into the recorder is needed to start the dual NIC setup

Multi Address

Multi-Address will allow for both NIC cards to be set on different Gateways from each other. This will allow for the recorder to be on the customer’s main network but then for the cameras to be on their own separate network without the need for a router.

1. Plug NIC labeled 2 into the gigabit uplink on the cameras PoE switch, a standard PoE LAN port will work as well if an uplink port is not available.
2. Plug NIC labeled 1 into the customers network, the recorder can be plugged into a switch, router, or modem directly.
3. Next, on the monitor that is hooked directly into the recorder, right click and log into the main menu
4. Navigate to System and then to Network settings.
5. Once in the Network menu set the IP address for NIC1 to match the customer’s gateway. If the gateway is unknown set NIC1 on DHCP. DHCP will automatically pick a free IP address and set the correct gateway. (Note: Remember that if the customer has a 192.168.1.1 network this is the same default as NIC2 and will cause the ports not to work. If this is the case make sure to change the Selected NIC to NIC2 and then manually set the IPv4 Default Gateway to a different subnet and give it a matching subnet IP address)
6. Next change the Selected NIC to NIC2 and then manually set the IPv4 Default Gateway to a different subnet than NIC1 and give it a matching IP address on the same subnet. For example if NIC1 is set to IP address: 192.168.1.30 and Gateway: 192.168.1.1, NIC2 will have to have a different gateway such as IP address: 192.168.20.100 and Gateway: 192.168.20.1. This puts NIC2 on the .20. subnet.
7. After both NIC cards are set up to have different gateways, the cameras will then need to be addressed to match the gateway that NIC2 is set to. Continuing with the example above, the recorders IP address is: 192.168.20.100 and Gateway is: 192.168.20.1. This means that each camera will need to be set to the same gateway and each camera will need to be given a different IP address on that gateway. See below for example of the cameras IP address.
   
8. Last set the Default Route in the recorder’s network settings to NIC2. This will set the recorder so when it reboots it looks to connect to the cameras on the second NIC port and NIC1 will stay active in the background.

At this point the cameras can now be searched for in the camera menu and added to the recorder.

Load Balance

Load Balancing is good for jobs that have a lot of cameras (64 or more) this will allow for both NIC ports to share the load of data and keep the cameras video images from lagging or skipping. The reason this is needed sometimes is because bit rates on cameras can quickly exceed what a 1 Gbps NIC port can handle.

1. Plug both NIC1 and NIC2 ports into the customer’s main network, the recorder can be plugged
   into a switch, router, or modem directly.
2. After both ports are connected to the network log into the recorder’s main menu and navigate to System > Network.
3. Set the Working Mode to Load Balance.
4. Select NIC should be set to Binding1
5. Next set the IPv4 Address and IPv4 Default Gateway to match the customer’s network. If the default gateway is unknown, set the recorder on DHCP and save. After DHCP grabs an IP address, disable DHCP to keep the IP address static.

Net-Fault Tolerance

Net-Fault Tolerance allows for the recorder’s NIC cards to be set in a redundant state that allows one to take over for the other if the first one fails to operate correctly. This is good in situations where the recorder must absolutely always be on the network. This could mean that the job site is monitored off site at all times or has cameras from a remote location.

1. Plug both NIC1 and NIC2 ports into the customer’s main network, the recorder can be plugged
   into a switch, router, or modem directly.
2. After both ports are connected to the network log into the recorder’s main menu and navigate to System > Network.
3. Set the Working Mode to Net-Fault Tolerance.
4. Select NIC should be set to Binding1
5. Next set the IPv4 Address and IPv4 Default Gateway to match the customer’s network. If the default gateway is unknown, set the recorder on DHCP and save. After DHCP grabs an IP address, disable DHCP to keep the IP address static.

How To Setup Multicast Addressing

Multicast can be used to pull up live view when the number of connecting Web clients exceeds the limit the NVR can accommodate.

1. Click System -> Network -> Multicast.

2. 2. Select the check box to enable multicast, and then enter the multicast IP and port number.

3. Click Apply to save the settings.

4. Log in to the Web client and set Live View Protocol to Multicast under Setup -> Client.

Note

Set the multicast IP correctly. Multicast address is class D address with the range 224.0.0.0 through 239.255.255.255

Reference

– 224.0.1.0–238.255.255.255 can be used on the Internet.
· 224.0.0.0-244.0.0.255: only for use on LAN.
· 224.0.0.1: all-hosts group address, which refers to all the multicast-capable hosts and routers on a physical network.
· 224.0.0.2: for all routers on this subnet.
· 224.0.0.5: for all OSPF routers.
· 224.0.0.13: for all PIMv2 routers.
· 239.0.0.0–239.255.255.255 are for private use like 192.168.x.x.

How To Manually Upgrade a UNV NVR Via Web Interface

If your NVR is accessible on the local area network using the web interface, you may update the
firmware using a file that has been downloaded and stored locally.

Within the Setup section of the web interface, go to the Maintenance section and select the Local Upgrade entry. On the screen that comes up, click on the Browse button next to the Upgrade text entry field and browse to the location on the local PC where the firmware file is stored and click on it. Once the file is properly entered, press the Upgrade button and the unit will perform the upgrade procedure including a reboot which will terminate your connection.

Please Note

If you download a firmware off the Nelly’s website, you must export the Zip Folder out of the initial Zip Folder that is downloaded.

How to Export Footage Via Web Interface

Uniview allows the user to have the capability of exporting footage via its web interface. This is quite handy in case the attached monitor UI is not accessible.

This guide is for after the device has a storage drive installed and formatted. As well as recording schedule set.

Step 1 – Navigating To Playback

First, you will input the device’s IP address into the address bar in a web browser. In this guide, we are using Edge running in IE mode.

Once you are logged in, across the top of the page, select the Playback Tab

Step 2 – Exporting Process

Once in the Playback section, you will see a list of cameras on a left column with Download icons next to them.

Click on the Download icon and a new popup window will appear.

From here, you can select all of the cameras that you want to export footage from.

There will be a Start Time & End Time selection for the clips.

Once you have the parameters selected, hit Search.

Afterwards, a list of clips will appear below, select the clips you would like. Also, if you’d like the clips to be merged together, select the Merge and Download checkbox.

When all the selections are selected, hit the Download Button.

As the files are downloading, you will get a status bar at the top right of the screen and once the files are done, a hyperlink will appear for you to click to pull up the files.

To view the exported footage, you can use either VLC Player or Uniview’s EZPlayer

How to Use Extended Transmission Mode

Long Distance POE/Data Transmission

One problem that a lot of installers run into with IP jobs is Cat5E cable length limitations. With the cable
limitations this requires that some job sites have extra equipment installed such as another switch or
extender. Installing extra devices not only creates more fail points on the job site but it can drastically
increase the price of the job. Uniview offers an incredible solution to this problem! Using Uniview built
in PoE recorders cameras can now be ran up to 300M (900 FT) over Cat5E plenum.

Enabling Long Distance Mode

Enabling long distance mode is very simple, log into the main menu of the recorder and navigate to the
Camera menu. In the camera menu each channel that has a PoE port built in to the recorder will already
have a channel spot reserved for them with an IP address. Double click on one of the reserved channels
to display the channels Modify menu. The last option in the Modify menu will be a check box to enable
Extended Transmission mode. Check this box on and then click the Modify button at the bottom.

Using A Uniview Switch

There is a small extended mode switch in the bottom corner of each uniview switch, this switch comes
off by default. Enabling this switch can give the same performance as a built in PoE switch when it
comes to long distance transmission. Installers will need to use Cat5e Plenum cable though. Each
Uniview PoE switch also comes with at least one gigabit uplink port and one fiber port.

Enabling The Extended Mode Switch 

1. Power on the switch without plugging anything into it.
2. Turn the extended mode switch to the “on” position.
3. Unplug the switch / Turn off the switch for 30 seconds.
4. Power the switch back on.

The switch will be in extended mode when the switch comes back on. Once in Extended mode the PoE
ports will all act individually without the ability to see the other PoE ports. Make sure that the NVR is
plugged into the gigabit uplink port otherwise it will not be able to see the cameras. If daisy chaining
switches together the gigabit or fiber ports will need to be used to link each switch and then connected
to the main network using the first switches second uplink (8 port switches cannot daisy chain without
an extra dummy non PoE switch to link everything.)

If daisy chaining switches together each switch will need to be link together by each switches uplink
ports. The NVR would then be plugged into the first switch in the chains second uplink port. And the
internet would need to be plugged into the last switch in the chains second uplink port.

Camera Limitations

Fixed lens cameras: 900 Feet

Motorized Lens/Base Cameras: 600 Feet

PTZ: 330 Feet

Adding Blank UNV Camera To UNV Retail NVR via Plug n Play

In scenarios where a Blank UNV camera is paired with a UNV Retail NVR, these will be plug n play. However, you may not get the full functionality of the Blank UNV Camera right away.

In this guide, we will show you the steps needed to allow the full functionality of the Blank UNV Camera.

Connecting The Camera

Since the Blank UNV cameras are plug n play with UNV Retail NVRs, the camera will come online if it is connected directly to the integrated POE switch of the NVR.

Camera Configuration via NVR

One thing you may notice however, the camera will show added with the ONVIF protocol. This can be very limiting as ONVIF only guarantees a live view and 24/7 recording.

If you go into the Smart Event section of the NVR while the camera is added via ONVIF, you will notice that none are available:

To accommodate for this, Go to Setup -> Camera -> Cameras. Checkmark the Camera, select Modify, change the Add Mode to IP Address, then change the Protocol to Uniview. Save.

Now that the camera is talking via the Uniview protocol, the Smart Events are now available!

Please Note

Not all UNV cameras support Smart Events, be sure to verify what events the camera supports beforehand! If you are unsure what events a camera may support, feel free to contact our Support or check the camera’s spec sheet.

Also Note

This guide will work along with UNV Retail Cameras and UNV Blank NVRs. Just the protocol will be changed to Private instead of Uniview on the Blank NVR.

How To Export Footage Via EZstation

In this guide, EZStation is already installed on the user’s computer, and the recording device has already been added to the software’s device list.

Step 1 – Accessing Playback & Exporting

From the Control Panel, select the Playback Tab to access the playback section of EZStation.

From the Playback Section, On the left-hand side, click on the “+” next to the NVR/DVR, the camera will drop down. Then select one camera on the left-hand side to playback and save footage from. Once the camera is selected, the calendar should populate with Blue or Red dots to indicate what type of footage was recorded on that day.

• Blue = Normal
• Red = Event
• Purple = VCA

After the day has been selected, Click the Search icon under the Calendar.

Next, select the download icon ” “. Then select the “By Time” tab and input the timeframe that you want to export footage from. When this has been done, select the Download icon.

Step 2 – Finding Saved File

To find where the saved exported footage went, you can select the Download Progress at the bottom of EZStation.

After the Download Icon has been clicked, a popup window will appear. From that popup window, there is a folder icon that can be selected to open the file path on your computer.

To change the File Path, from the Control Panel in EZStation, select the System Configuration icon, then Recording Tab.

How To Backup Recording Via HDMI Interface

Backup, also known as recording backup, is the process of querying video stored on a hard disk of
the NVR and then saving to a USB storage device as a file.

Recording Backup

Recording backup has the following conditions:

• Back up using a USB storage device: format the partition in FAT32 or NTFS format; connect
  the storage device correctly to the NVR.
• Permission is required.
• The recording to back up is stored on a hard disk of the NVR

Note: The default file format is .mp4 when you back up recordings to a USB storage device.

Normal Backup

1. Click Backup > Recording. All cameras are selected by default.
2. Set search conditions and then click Search. Search results are displayed.
   • Note: You can lock/unlock and play recording files in this window.
3. Select the desired recording(s) and then click Backup.
4. Select a partition
   • Back up to USB storage device

Set the destination in the USB storage device and then click Backup. The recording(s) will be
saved to the specified directory.

Note: You may want to create a new folder for the recording(s) by clicking New Folder.

Note: If the connected storage device has a capacity that is greater than 2T, clicking Format will
format the device to NTFS file system; if the capacity is 2T or less, the device will be formatted to
FAT32 or NTFS. Only certain devices can format a storage device that has a greater capacity than
2T.

Note: A progress bar (e.g., Exporting X/Y) is displayed to indicate the progress, where X indicates
the current number being backed up, and Y indicates the total number of recordings. To cancel
the operation, click Cancel.

Note: A backup file is named in this format: camera name-recording start time. File extension. For
example, Ch11-20220630183546.mp4.

Video Clip Backup

A recording can be clipped and saved to a USB storage device

1. Open the playback window
2. After playback starts, click   and   on the playback toolbar to clip videos.
3. Click   and then click the Video Clip tab to view video clips.
4. Select the desired video clip(s) and then click Backup.
5. Select a destination in the USB storage device and then click Backup. The selected video clips
   are saved to the specified directory

Image Backup

The default format of image backup is JPG

1. Click Backup > Image.
2. Set search conditions and then click Search. Search results are displayed
   • Note: The image resolution depends on the resolution from the output interface and the number of windows displayed when the snapshot is taken.
3. Select the desired file(s) and then click Backup
4. Select a destination in the USB storage device and then click Backup. The selected files are
   saved to the specified directory.

<p>The post Using Your Uniview NVR first appeared on NVR IPCAMERA SECURITY.</p>

What is CCTV Camera Software for PC?

The Software for PC is designed and developed by the CCTV camera manufacturers for their security solutions and products. This helps to connect as well as control the CCTV cameras on PC. Here we provide you with the top 25 CCTV Cameras Software for PC.

Application of these CMS

These CMS allows users to connect and maintain the CCTV system with your PC. With these applications, it becomes easier to get the live view of your residence, family, office premises and locality. With these applications, You can access the CCTV from remote locations as well.

it is now easier to connect and maintain on your security online through CCTV cameras. CCTV cameras are the best security solution to enhance the security of family members and others.

Importance of the CMS

These CMS helps to connect as well as control the CCTV cameras on PC. These CMS acts as an intermediary between PC and CCTV camera set up to help the user client to provide access to the user of CCTV camera on PC. We will highlight some of the important functions which can be performed by the application.

• Remote Access.
• Connectivity and control
• Video Surveillance.
• CCTV Video recording.
• Live monitoring on a different viewpoint.
• PTZ camera controlling.
• Remote playback of the recording.

List of Top 25 CCTV Camera Software for PC

Here we will discuss in detail about the application for PC. We provide you with the top 25 CMS. CCTV cameras are available for Windows and Mac operating systems. But some CCTV manufacturers do not provide the application for Mac user clients.

The download file of every CMS is in the compressed format and use WinRAR to extract the downloaded file. Besides, get better knowledge regarding the CMS installation and setup procedure by clicking the links.

The list of the best CMS is as follows:

1. IVMS 4500 by Hikvision

IVMS is also one of the best CMS developed by Hikvision Company. This CMS is the best application in the market to connect as well as control.

Hikvision is a global leader in the provider of security solutions and products. Emphasizing on the comprehensive and highly skilled R&D team, Hikvision manufactures a wide range of products. Hikvision has broadened its field to smart home tech, industrial automation, and automotive electronics industries to realise its long-term goal.

Hikvision products also render powerful business intelligence for clients, which enables more efficient transactions and greater commercial profit. Hikvision is a global leader of IoT solution provider with video as its core competency. Hikvision now has above 19,000 R&D engineers. The company yearly funds over 9% of its annual sales revenue to research and development for continued product innovation.

IVMS 4200 & Storage Server

The application is provided by the Hikvision company. The free download link is provided below. IVMS 4200 installation procedure is here as well, click on the link of IVMS 4200. Also, read the instruction of IVMS 4200 storage server as well.

Download IVMS 4200 For PC (Windows) V3.1.1.13

IVMS 4200 For PC (Windows) Download VS V1.0.0.13

Free Download IVMS 4200 AC V1 For PC  AC V1.0.1.13

Download Multi lang.  IVMS 4200 For PC  Multilingual Package V3.1.1

IVMS 4200 For PC Multilanguage for PC   Multilingual Package AC V1.0.1

Multi-language VS V1  IVMS 4200 For PC   Multilingual Package VS V1.0.0

Free Download IVMS 4200 for PC (MAC)   MAC V2.0.0.10

Download IVMS 4200 Storage Server for MAC

Download IVMS 4200 Storage Server for Windows

IVMS 4500

We have provided you with the IVMS 4500 for PC free download link below. Get the free download link. Read the installation procedure of IVMS 4500 here.

Download IVMS 4500 For PC (Windows)

Download IVMS 4500 for PC (MAC)

2. Smart PSS by Dahua

We provide you here with the Smart PSS by the Dahua Company. The Smart PSS helps connect the CCTV cameras on your PC. The CMS has many features and functions to help the user to connect, live stream, PTZ control, etc.

Zhejiang Dahua Technology Company is a leading company in video-centric smart IoT products and service provider. Dahua Technology Company renders end-to-end security solutions, products, and services to create values for city operations, corporate management, and clients.

Dahua solutions, products, and services are in over 180 countries and regions. Dahua Technology has 54 subsidiaries companies and branch offices globally in Asia, the Americas, Europe, Middle East, Oceania, and Africa.

Smart PSS

Here is the free download link of Smart PSS for Windows and Mac OS. Also, read the instruction of installation procedure in the article of Smart PSS.

Smart PSS For PC Free Download (Windows)

Smart PSS For Mac Free Download

3. NVMS 1000 by TVT

NVMS is one of the famous application developed for the TVT CCTV camera brand. This application provides you with many features to administer your CCTV camera on PC. The CMS is a free download here, through this you can get the following features:

• Remote Access
• PTZ Control
• Live stream
• Recording videos

TVT brand of CCTV camera is manufactured and distributed by the Shenzhen TVT Digital Technology Company established in 2004 and headquarter in Shenzhen, also listed on the SME board of Shenzhen stock exchange in December 2016.

As a worldwide best quality security solutions and products provider in more than 120 countries apart from China. Ranking as the most advanced company that enters into the abroad market in the video monitoring industry in China, TVT has established an independent and perfect marketing service system.

NVMS 1000

Here is the download link for NVMS 1000 for Windows and Mac OS. You can read about the installation procedure as well by clicking on the link of NVMS 1000.

NVMS 1000 for Windows 10

NVMS 1000 for Windows 10

NVMS 1000 for Mac OS

NVMS 7000

Get the free download as well as free installation procedure on NVMS 7000. This is available for Windows and Mac OS.

Free Download NVMS 7000 for PC (Windows)

NVMS 7000 for MAC Download Free

NVMS 2.1

We provide the latest application provided by the TVT known as NVMS 2.1 for Windows OS. This CMS is only available for the Windows operating system. Read the installation procedure of NVMS 2.1 here.

NVMS Lite 2.1 Download Free

4. KVMS Pro by CP PLUS

We provide you here KVMS provided by the CP Plus Company. KVMS Pro provides you with a wide range of functions and features as well. With this, you can connect CP Plus CCTV camera setup with the application on Windows and Mac.

CP PLUS is the global leader in high-level security and surveillance solution. Inspired by the vision and commitment to make surveillance easy and affordable, CP PLUS has begun a mission to make the world a safe and secure community.

As per the IHS Survey 2017, CP PLUS attains as the most recent and most active brand to enrol the club of Top 4 security companies in the world and Top 2 in Asia. CP PLUS attribute their path-breaking success to sound R&D leadership. CP PLUS products pass through stringent quality-control tests and are globally certified by the certificates such as UL, CE, FCC, etc.

KVMS Pro

Here is the CMS of KVMS Pro free download link for Windows and Mac OS. Read the instruction of installation procedure to install the KVMS Pro here.

Free Download KVMS Pro for PC (Orange)

Free Download KVMS Pro for PC (Blank)

Free Download Indigo CVMS for Mac

Indigo IVMS for Mac Free Download Free

5. EZStation by Uniview

Here we are about to discuss the EZStation developed by the Uniview. With this, you can connect as well as perform other functions to control the CCTV camera on your PC. With this, you can get many features such as live view, audio-video recording, etc.

Uniview is the global leader of IP video surveillance. First-ever company to introduce IP video surveillance in China, Uniview is the third-largest player in the video surveillance industry of China. In the year 2018, Uniview has the 4th largest global market share in the surveillance industry.

Uniview has a wide range of IP video surveillance products ranges from IP cameras, NVR, Encoder, Decoder, CMS Client, and app, covering several markets sectors including retail, building, industry, education, commercial, and city surveillance.

EZStation

Get here the download links of EZStation as well as the installation procedure of EZStation.

EZStation for PC (Windows 32 Bit)

EZStation for PC (Windows 64 Bit)

Download EZStation for MAC

6. Guard Station by Uniview

Guard Station is also another applicaton provided by the Uniview Technology Company. This CMS provides you with a variety of software to connect as well as control the Uniview CCTV cameras. This app provides functions such as PTZ Control, live streaming, video recording etc.

Guard Station

Here is the free download link of Guard Station for Windows and Mac OS. For the process to install the Guard Station read here.

Guard Station Software Download for Windows

Guard Station For MAC

7. Wansview Cloud by Wansview

Here we provide you with the Wansview Cloud which is designed and developed by the Shenzhen Wansview Technology company. It provides you with the capability to monitor your premises from remote locations on your PC. Wansview App for PC helps to connect as well as control the CCTV cameras.

Established in 2009, Wansview dedicated to product design, development technology innovation, and professional manufacturing processes in the field of security solutions and products. Wansview has clients in more than 100 countries in the world, such as the United States, Germany, Britain, France, Canada, Spain, Italy, Russia, Brazil, etc.

Wansview Cloud

We provide with the free download of the Wansview Cloud for Windows and Mac as well as the installation method.

Free Download Wansview APP for PC (V1.0.2)

Wansview APP for PC Free Download (V1.0.3)

Download Wansview APP for MAC Free(V1.0.3)

8. MI Home by Xiaomi

Here we provide the MI Home for PC to connect the Xiaomi’s MI Home CCTV cameras. This CMS is only available for Windows and Mac OS. The application provides remote access, live view and connectivity at any kind of network.

Xiaomi Inc. is a China-based company which deals in electronics and security products. This company has been taken good care of its clients and has a greater market share by providing the product at affordable prices.

MI Home

Now get the free download of MI Home for Windows OS. Also, read the instruction to install the MI Home on Windows.

MI Home Security Camera App Download For PC

9. V380 CMS By V380 Camera

We provide you with the free download of V380 which is designed and developed by the V380 Camera. V380 software helps you to connect the V380 CCTV cameras and helps to maintain surveillance over the home, locality and office premises. The app is available only in Windows OS.

V380 Camera is a most-advance company that engages in R&D, production, marketing, and service of the V380 Wifi Smart Camera, V380 IP Camera, and V380 360 Panasonic Camera. V380 Camera is one wifi camera brand in the company which aids to create intelligent terminal products.

V380 Software

Get the free download of V380 for Windows OS. Also, read the installation instruction of V380 software here.

Download V380 App for PC

10. PVMS By Panasonic

Here we will discuss the PVMS software developed by Panasonic Company. PVMS is one of the best CMS provided by the Panasonic Company. This is available only for the Windows operating system, this application helps to connect the CCTV cameras, provide remote playback, System configuration and video intercom.

Panasonic is a Japanese company established in 1935, with more than 259,000 employees. Panasonic deals with different kind of CCTV cameras and software. Panasonic has been one of the largest electronic appliances manufacturer in many countries.

PVMS software

The free download link of PVMS is available here. Also, get the installation guide by visit the article of PVMS.

Free PVMS Download for PC

11. Idmss Lite by Dahua

Idmss Lite software is also provided by the Dahua Technology company. Idmss Lite for PC is available for free download. The performs various functions such as live streaming, PTZ control, playback video, record video, snapshots, etc.

Idmss Lite

We have provided the instruction of installation in detail in the link of Idmss Lite here.

Free Download Idmss lite for PC

Free Download Idmss lite for Mac

12. DMSS by Dahua

Get here the DMSS by Dahua Technology Company. DMSS is the mobile application provided by the Dahua Company. This app is available for Windows and Mac user client, this CMS provides the user access to their Dahua CCTV cameras.

DMSS

Here is the free download of the DMSS as well as the procedure to install the DMSS software.

Free DMSS  for Windows 7/8/10 Download

Free DMSS for MAC Download

13. EZVIZ App by Uniview

EZVIZ App is also another application designed and developed by the Uniview Technology Company. This CMS helps to connect the as well as provides multilingual support to the users. This software is available for Windows as well as Mac OS.

EZVIZ App

Download free and also read about the installation procedure of EZVIZ App here.

Download Ezviz App For PC Windows 7/8/10

Download Ezviz App Video Plugin  Windows

Download Ezviz App Video Plugin

14. Velocity by HiFocus

HiFocus CMS is designed and developed by HiFocus Electrovision Company for its security solutions and products. HiFocus CMS helps to connect as well as control the CCTV cameras on your PC. HiFocus CMS for PC is the best security solution provided for the HiFocus CCTV system in the market.

Hi-Focus aims to bring the most advanced CCTV surveillance systems that can combine high volumes of data to produce essential information. The system provides users with advanced scrutiny, analysis, interpretation, and management. HiFocus assistance helps in the deployment of fast and intelligent security system solutions through a complete analysis based on the position and location of the device.

India’s trusted CCTV Company, Hi-Focus provides its customers with the best end-to-end video analytics solutions with the best surveillance cameras accompanying integrative proficiency to understand customer’s behaviour and other essential operational indices.

Velocity

Here is the free download of Velocity by the HiFocus, also read the installation procedure of Velocity.

Free Download Hifocus CMS Software for PC

Hifocus CMS Software for MAC Free Download

15. Smart Viewer By Hanwha (Samsung)

Hanwha Security Company has developed the Smart Viewer to connect the Hanwha CCTV cameras. The CMS provides you up to 72 channel of CCTV cameras view on screen, search recorded data by event type and date, export video and dual monitor support.

Hanwha Techwin America (Samsung Techwin) is a security technology company that has exhibited stable growth for the past 40 years and is part of the Hanwha Group. Hanwha Techwin is a Fortune 500 company and also one of the conglomerates in South Korea considered to be the largest.

The Hanwha Group has the expertise of over 60 years in the manufacturing of the video surveillance industry. The company has created many clients across the globe by providing the best quality product and services.

Smart Viewer

The link to download the Smart Viewer is free here. And visit the installation procedure article of Smart Viewer.

Download Smart Viewer For PC (Windows)

Download Smart Viewer For MAC

16. Wiseview by Hanwha (Samsung)

There is another software also to connect the Hanwha CCTV cameras also known as Wiseview. This provides you with some features as dual-screen assistance, live streaming, log administration, and user management.

Wiseview

Get the download of the Wiseview for free and installation guidelines as well.

Free Download Wiseview for PC (Windows)

Wiseview for MAC Free Download Free

17. Night Owl Connect By Night Owl

Night Owl Connect is designed and developed by the Night Owl Company for Night Owl CCTV cameras. This software has features such as IP device configuration, group management, main preview and log search functions. This feature helps the user to connect the CCTV cameras.

Night Owl Security Company is a leading innovator in the security technology industry. It is the fastest-growing manufacturer of security solution and products which offers the best value on the market. This is accomplished by designing and engineering products that are of high quality, user friendly, and affordable.

Night Owl Connect

Download free Night Owl Connect software for Windows and Mac OS. Read the guidelines for installation of Night Owl Connect.

Download Night Owl Connect for PC (Windows)

Download Night Owl Connect for MAC

18. Guarding Vision

Here is the Guarding Vision for PC developed by the Guarding Expert. This CMS helps us to connect as well as control the CCTV cameras on PC. This provides you ability to connect multiple CCTV camera brand on the same software. This application is available for Windows and Mac operating system. Guarding Vision helps us to detect motion as well.

Guarding Vision

Now download free Guarding Vision for Windows and Mac as well as learn about the installation procedure.

Free Download Guarding Vision for PC (Windows)

Guarding Vision for MAC Download Free

19. HiP2P Client by Dericam

Here we provide you with the HiP2P Client software for connecting and administering the Dericam CCTV cameras for PC. HiP2P Client is available for Windows and Mac user clients, this provides you with the ability to control Dericam CCTV cameras on PC.

Shenzhen Dericam Technology Company was formed and established in the year 2010. The company is developing, manufacturing, and marketing IP cameras and storage devices for home security field. Currently, Dericam has clients in the US, Australia, Netherlands, France, Poland, and other countries as well.

Dericam aims to innovate and develop its products to meet the demands of customers. Dericam continues to innovate and develop the quality of its products, enable everyone to enjoy the benefit of advanced technology. All series of products are CE & FCC certified.

HiP2P Client

Here get the download of HiP2P Client for free and read carefully the installation method of HiP2P Client.

HiP2P Client Software Download Free

HiP2P Client Software Download For MAC

20. YI IoT By YI Technology

Here we will discuss in detail about the YI IoT software which is designed and developed by the YI Technology Inc. YI IoT software helps you to connect the YI IoT camera and YI Dome Camera on your PC. This software provides you with cloud encryption and real-time push notification alerts. This is only available for Windows OS only.

YI Technology strives to deliver enhanced security and productivity to clients globally through high-quality hardware and cutting-edge. YI Technology is committed to rendering users with convenient and affordable technology emphasizing the latest and greatest Edge Computing features as well as highly advanced AI algorithms.

YI Technology develops and manufactures intelligent video and imaging solutions using the latest technology to solve real problems for its clients. YI Technology values its clients’ security and privacy and employs a 128bit end-to-end encryption to keep clients data safe.

YI IoT

Here get the free download now of the  YI IoT as well as the installation method for Windows OS.

Free Download YI IoT App for PC

21. YI Home By YI Technology

Here is another software developed by YI Technology known as YI Home. This also helps to connect as well as control the YI Home and YI Dome cameras on PC. This provides various features which are similar to YI IoT.

YI Home

Get the YI Home free download link and installation procedure guidelines.

Free Download YI Home App for PC (Windows)

YI Home App for Mac Free Download

22. DW VMAX By Digital Watchdog

Let us learn about the DW VMAX software which developed by the Digital Watchdog a leading CCTV camera manufacturing company. The DW VMAX is available for Windows, Mac and Linux OS. The has features such as PTZ control, live image quality enhancement, zoom in and out option on live streaming, multiple as well as single video export, 4/6/8/16 or 32 Channel view on PC and audio communication.

Digital Watchdog (DW) is a leader in surveillance cameras and associated video management, delivering complete video surveillance solutions for HD over Coax and HD IP CCTV systems of any size and for any application.

DW VMAX

Get the free download of DW VMAX for Windows, Mac and Linux OS here, read the installation procedure correctly of DW VMAX.

Free Download DW VMAX for PC Windows x64(Version – 4.1.0.31401)

DW VMAX For MAC Download Free x64(Version – 4.1.0.31401)

Download DW VMAX For Linux Free x64(Version – 4.1.0.31401)

23. CloudSEE by Jovision

We provide you with CloudSEE developed by the Jovision Technology Company. CloudSEE helps to connect the Jovision CCTV cameras. This provides video recording on a live camera, play recorded videos., assistance real-time playback when preview, playback supports quick, slow, and by frame modes, local snapshots, and recordings and files stored locally.

Jovision Technology Company established in the year 2000, is the world’s preeminent manufacturer and distributor of video surveillance products and solutions. Jovision is recognised in developing and manufacturing highly advanced video surveillance products.

Following are the new main researched and developed product of Jovision Company, smart IP cameras, WiFi cameras, NVR, DVR, HD Analog cameras, CMS video management software, alarm systems, encoders, decoders, and CCTV modules. Jovision’s expert engineers also provide customized security solutions.

CloudSEE

Here is the free download of CloudSEE for Windows OS because the CMS is only available for Windows OS. Also, read the installation procedure carefully of CloudSEE.

Free Download CloudSEE For PC

24. SwannView Link by Swann

We will discuss in detail about the SwannView Link developed by Swann Communication is the best CMS to connect the Swann CCTV cameras. SwannView Link helps you to connect the CCTV cameras on your PC. This provides brightness adjustment, live view and application user management.

Swann has always been a leader. Begins its business from the Swann’s personal house basement in Melbourne, Australia. Swann has established and created its clients in the USA, Canada, Australia, UK, Hong Kong and China and also in other 40 countries.

Swann provides surveillance and monitoring technology by introducing its new product such as wireless HD cameras, video surveillance recording systems and cameras, and also 4K Ultra HD, 3-5 Megapixel HD, and 1080p HD camera setup with temperature and motion sensors technology.

SwannView Link

Get the download free now of SwannView Link, read the instruction of installation of SwannView Link.

Download SwannView Link For PC (Windows)

Download SwannView Link For PC (MAC)

Download SwannView Plus For PC

25. Amcrest View Pro by Amcrest

Here is the Amcrest View Pro designed and developed by the Amcrest Company. This application helps to connect the Amcrest CCTV cameras on your PC. This CMS provides features such as user management, live streaming, playback recording, etc.

Amcrest products are advance designed remote monitoring and surveillance systems which build a bridge between powerful capabilities, ease of use and affordability. With high quality and robust design, Amcrest cameras allow the user to securely monitor their residence, office premises etc. Amcrest camera systems are designed to record and produce live video and audio to the user anywhere in the world.

Amcrest is a top security products manufacturer as well as distributor servicing many clients worldwide primarily across the United States, Canada, the UK, Germany and France. Amcrest provides after-sales support and local warranty services to all of our customers in their local countries for free of cost.

Amcrest View Pro

Here is the free download of Amcrest View Pro free download and installation guidelines.

Free Download Amcrest View Pro for PC (Windows)

Amcrest View Pro for MAC Free Download

Conclusion

Here we have discussed some of the top 25 CCTV camera software for PC. These are the best softwares to control the CCTV cameras on your PC. The softwares are available to download free.

This CCTV software provides you with many features like a live recording, video snapshot, audio-video display, motion detection, night vision, and alarm notifications as well. With these CMS it easier to connect as well as manage the CCTV cameras.

We have discussed in detail about the “Top 25 CCTV Camera Software for PC“ in detail with the free download link of the software as well. For more information and query you can contact us by commenting on the comment section below of the article.

<p>The post Top 25 CCTV Software Free first appeared on NVR IPCAMERA SECURITY.</p>

EZStation default user/password is admin/123456.

Name	OS	Version	Description	Notes
EZTools 2.0 Download	Windows	R1122.2.3.2 22/09/2021	Find, configure and address Uniview cameras and NVRs on the local network. Includes the HDD calculator.	New layout
EZStation 3 Download	Windows	v3.10.3 22/09/2021	Full featured Video Management Software for both cameras and NVRs	New UI, bug fixes.
EZPlayer Download	Windows	v1111-1.2.0 11/07/2019	Allows playback of UVRD files from IP Camera SD Cards.	Fixed audio playback issue.
EZStation MAC Download	MacOS	v3.2.1 09/01/2020	EZStation for Mac	Bug fixes.
EZView Google Play	Android	See app listing	Mobile client for Android phones and tablets	See app listing
EZView App Store	iPhone and iPad	See app listing	Mobile Client for Apple iPhone and iPad	See app listing

<p>The post Uniview Software Firmware Download first appeared on NVR IPCAMERA SECURITY.</p>

Uniview has complete IP video surveillance product lines including IP cameras, NVR, Encoder, Decoder, Storage, Client Software and app, covering diverse vertical markets including retail, building, industry, education, commercial, city surveillance etc.

Our aim is to become a global leader in video surveillance industry which endeavors to build a safer world by providing professional, reliable and cutting-edge products and services.

<p>The post Uniview Ezview Firmware Software Download first appeared on NVR IPCAMERA SECURITY.</p>